Commit Graph

683 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds bb3290d916 Remove gperf usage from toolchain
It turns out that gperf-3.1 changed types in the generated code in ways
that aren't even trivially detectable without having to generate a test-file.

It's just not worth using tools and libraries from clowns that don't
understand or care about compatibility.  So get rid of gperf.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-19 11:02:53 -07:00
Linus Torvalds 16ffc4c394 Kbuild misc updates for 4.13
- Use more portable shebang for Perl scripts
 
 - Remove trailing spaces from GCC version in kernel log
 
 - Make initramfs generation deterministic
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZXrq2AAoJED2LAQed4NsGzlIP/jmVGusmFIP2jFC7zUEVaKsp
 VK4tezn0aa/c/BsY+kGu3OVqUHgspQSjNa4wH27A+z4/skkxPQKUmF1IY+8/W5yc
 aR0Yn76vzjjNYNl6AS3fA+QP+dBn+UdQDA2jMNKyu/3fACjiVY9BBx2ZdhJMwJcy
 WrAax/fQNnRjmAQFQpptNBvYZn1B7A/7iFCPpQbPP6GFsqSJ2zMtRGjtoaeFgpV3
 On6d4uAcgAcnEHw1zomWTx0N0LghW+L6Te9PoHyPZnyxfi+OVN/bmakoy7qs1uUh
 zWucIhpBc8bshx6s4VnJ5OZhFNVEkeSjq5CivYKnU0u4waKb7suxuI1+D6e7uRrA
 2OuXmhm7sRvGHwGIxEdJAOlF0PNecYSgJPv+ZDcOxVMy72REUZUEjgThti/vLdUn
 9iVDXn/ExOxqJW7isth1MTn3FBsDUIZDKK5EypgY/oAuECR6pQnjD3HjojJBACau
 OqbsZDPqmDiY3sxzU1GcAbrhAJiGyWXV7hAKsROoVlgwU2fu0Al2HHtDzEjqLrzK
 wIvAD+lsWKiFP1zXlCnrsgjXgn/RFG1cHLiqEhtPy+HpqNzXoXDRs5kcTsr5Z0fj
 3DlMNqa7Bv0raL3+XG2pp9OR5gWdLxmOuPIR/TNU3JubTRur4SElJtXyDoHVTJti
 s4mye73xjjcifGEwpZQw
 =C+WJ
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull misc Kbuild updates from Masahiro Yamada:

 - Use more portable shebang for Perl scripts

 - Remove trailing spaces from GCC version in kernel log

 - Make initramfs generation deterministic

* tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: create deterministic initramfs directory listings
  scripts/mkcompile_h: Remove trailing spaces from compiler version
  scripts: Switch to more portable Perl shebang
2017-07-07 15:09:09 -07:00
Randy Dunlap ad81810607 kconfig: fix sparse warnings in nconfig
Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):

../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer

nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-23 06:00:52 +09:00
Borislav Petkov ff85a1a80e kconfig: Check for libncurses before menuconfig
There is a check and a nice user-friendly message when the curses
library is not present on the system and the user wants to do "make
menuconfig". It doesn't get issued, though. Instead, we fail the build
when mconf.c doesn't find the curses.h header:

    HOSTCC  scripts/kconfig/mconf.o
  In file included from scripts/kconfig/mconf.c:23:0:
  scripts/kconfig/lxdialog/dialog.h:38:20: fatal error: curses.h: No such file or directory
   #include CURSES_LOC
                      ^
  compilation terminated.

Make that check a prerequisite to mconf so that the user sees the error
message instead:

  $ make menuconfig
   *** Unable to find the ncurses libraries or the
   *** required header files.
   *** 'make menuconfig' requires the ncurses libraries.
   ***
   *** Install ncurses (ncurses-devel) and try again.
   ***
  scripts/kconfig/Makefile:203: recipe for target 'scripts/kconfig/dochecklxdialog' failed
  make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
  Makefile:548: recipe for target 'menuconfig' failed
  make: *** [menuconfig] Error 2

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-10 01:27:49 +09:00
Kamil Rytarowski cb77f0d623 scripts: Switch to more portable Perl shebang
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.

This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.

This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.

While there, drop "require 5" from scripts/namespace.pl (Perl from 1994?).

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-14 11:20:44 +09:00
Nicolas Iooss 9be3213b14 gconfig: remove misleading parentheses around a condition
When building the kernel with clang, the compiler complains about the
presence of a condition inside two pairs of parentheses:

    scripts/kconfig/gconf.c:917:19: error: equality comparison with
    extraneous parentheses [-Werror,-Wparentheses-equality]
                    } else if ((col == COL_OPTION)) {
                                ~~~~^~~~~~~~~~~~~
    scripts/kconfig/gconf.c:917:19: note: remove extraneous parentheses
    around the comparison to silence this warning
                    } else if ((col == COL_OPTION)) {
                               ~    ^            ~
    scripts/kconfig/gconf.c:917:19: note: use '=' to turn this equality
    comparison into an assignment
                    } else if ((col == COL_OPTION)) {
                                    ^~
                                    =

Silence this warning by removing a level of parentheses.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-03-22 02:56:33 +09:00
Linus Torvalds 37861ffa8c Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:

 - 'make xconfig' gui fixes

 - 'make nconfig' fix for options with long prompts

 - fix 'make nconfig' warning when pkg-config forces -D_GNU_SOURCE

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  xconfig: fix missing suboption and help panels on first run
  xconfig: fix 'Show Debug' functionality
  kconfig/nconf: Fix hang when editing symbol with a long prompt
  Scripts: kconfig: nconf: fix _GNU_SOURCE redefined warning
2016-12-17 16:30:24 -08:00
Linus Torvalds 9465d9cc31 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "The time/timekeeping/timer folks deliver with this update:

   - Fix a reintroduced signed/unsigned issue and cleanup the whole
     signed/unsigned mess in the timekeeping core so this wont happen
     accidentaly again.

   - Add a new trace clock based on boot time

   - Prevent injection of random sleep times when PM tracing abuses the
     RTC for storage

   - Make posix timers configurable for real tiny systems

   - Add tracepoints for the alarm timer subsystem so timer based
     suspend wakeups can be instrumented

   - The usual pile of fixes and updates to core and drivers"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  timekeeping: Use mul_u64_u32_shr() instead of open coding it
  timekeeping: Get rid of pointless typecasts
  timekeeping: Make the conversion call chain consistently unsigned
  timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
  alarmtimer: Add tracepoints for alarm timers
  trace: Update documentation for mono, mono_raw and boot clock
  trace: Add an option for boot clock as trace clock
  timekeeping: Add a fast and NMI safe boot clock
  timekeeping/clocksource_cyc2ns: Document intended range limitation
  timekeeping: Ignore the bogus sleep time if pm_trace is enabled
  selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
  clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
  clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
  arm64: dts: rockchip: Arch counter doesn't tick in system suspend
  clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
  posix-timers: Make them configurable
  posix_cpu_timers: Move the add_device_randomness() call to a proper place
  timer: Move sys_alarm from timer.c to itimer.c
  ptp_clock: Allow for it to be optional
  Kconfig: Regenerate *.c_shipped files after previous changes
  ...
2016-12-12 19:56:15 -08:00
Boris Barbulovski 83c3a1bad2 xconfig: fix missing suboption and help panels on first run
qconfig initial slider sizes fix.

On first `make xconfig`, suboption and help panels were hidden.
Now we properly detect the first run, and show those panels.

Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11 21:40:54 +01:00
Boris Barbulovski e039303ff7 xconfig: fix 'Show Debug' functionality
xconfig - Fix missing 'Show Debug' functionality.

xconfig Help mentions 'Show Debug Info' but it was missing from any
menu.

* Add 'Show debug' menu to the main menu.
* Properly load showDebug settings.

Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11 21:39:25 +01:00
Ben Hutchings 79e51b5c2d kconfig/nconf: Fix hang when editing symbol with a long prompt
Currently it is impossible to edit the value of a config symbol with a
prompt longer than (terminal width - 2) characters.  dialog_inputbox()
calculates a negative x-offset for the input window and newwin() fails
as this is invalid.  It also doesn't check for this failure, so it
busy-loops calling wgetch(NULL) which immediately returns -1.

The additions in the offset calculations also don't match the intended
size of the window.

Limit the window size and calculate the offset similarly to
show_scroll_win().

Cc: stable <stable@vger.kernel.org>
Fixes: 692d97c380 ("kconfig: new configuration interface (nconfig)")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
2016-12-11 12:26:42 +01:00
Nicolas Pitre d3fc425e81 kbuild: make sure autoksyms.h exists early
Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created.  Let's create it at the same time as
the directory holding it is created.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-01 10:19:22 -08:00
Cheah Kok Cheong 0eb4734696 Scripts: kconfig: nconf: fix _GNU_SOURCE redefined warning
Fix below warning when make nconfig is run initially
or after make clean.

  HOSTCC  scripts/kconfig/nconf.o
scripts/kconfig/nconf.c:8:0: warning: "_GNU_SOURCE" redefined
 #define _GNU_SOURCE
 ^
<command-line>:0:0: note: this is the location of the previous definition

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-11-29 14:03:14 +01:00
Nicolas Pitre 32ce5ac867 Kconfig: Regenerate *.c_shipped files after previous changes
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Edward Cree <ecree@solarflare.com>
Link: http://lkml.kernel.org/r/1478841010-28605-3-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-16 09:26:33 +01:00
Nicolas Pitre 237e3ad0f1 Kconfig: Introduce the "imply" keyword
The "imply" keyword is a weak version of "select" where the target
config symbol can still be turned off, avoiding those pitfalls that come
with the "select" keyword.

This is useful e.g. with multiple drivers that want to indicate their
ability to hook into a secondary subsystem while allowing the user to
configure that subsystem out without also having to unset these drivers.

Currently, the same effect can almost be achieved with:

config DRIVER_A
	tristate

config DRIVER_B
	tristate

config DRIVER_C
	tristate

config DRIVER_D
	tristate

[...]

config SUBSYSTEM_X
	tristate
	default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...]

This is unwieldy to maintain especially with a large number of drivers.
Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X
to y or n, excluding m, when some drivers are built-in. The "select"
keyword allows for excluding m, but it excludes n as well. Hence
this "imply" keyword.  The above becomes:

config DRIVER_A
	tristate
	imply SUBSYSTEM_X

config DRIVER_B
	tristate
	imply SUBSYSTEM_X

[...]

config SUBSYSTEM_X
	tristate

This is much cleaner, and way more flexible than "select". SUBSYSTEM_X
can still be configured out, and it can be set as a module when none of
the drivers are configured in or all of them are modular.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Michal Marek <mmarek@suse.com>
Cc: Edward Cree <ecree@solarflare.com>
Link: http://lkml.kernel.org/r/1478841010-28605-2-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-16 09:26:33 +01:00
Linus Torvalds f429d35588 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig update from Michal Marek:

 - fix for behavior of tristate choice items and fix for documentation
   of existing kconfig behavior [Dirk Gouders]

 - more helpful "unexpected data" kconfig warning [Paul Bolle]

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig/symbol.c: handle choice_values that depend on 'm' symbols
  kconfig-language: elaborate on the type of a choice
  kconfig-language: fix comment on dependency-generated menu structures.
  kconfig: add unexpected data itself to warning
2016-05-26 22:27:09 -07:00
Dirk Gouders fa64e5f6a3 kconfig/symbol.c: handle choice_values that depend on 'm' symbols
If choices consist of choice_values of type tristate that depend on
symbols set to 'm', those choice_values are not set to 'n' if the
choice is changed from 'm' to 'y' (in which case only one active
choice_value is allowed). Those values are also written to the config
file causing modules to be built when they should not.

The following config can be used to reproduce and examine the problem;
with the frontend of your choice set "Choice 0" and "Choice 1" to 'm',
then set "Tristate Choice" to 'y' and save the configuration:

config modules
	boolean modules
	default y
	option modules

config dependency
	tristate "Dependency"
	default m

choice
	prompt "Tristate Choice"
	default choice0

config choice0
	tristate "Choice 0"

config choice1
	tristate "Choice 1"
	depends on dependency

endchoice

This patch sets tristate choice_values' visibility that depend on
symbols set to 'm' to 'n' if the corresponding choice is set to 'y'.

This makes them disappear from the choice list and will also cause the
choice_values' value set to 'n' in sym_calc_value() and as a result
they are written as "not set" to the resulting .config file.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-10 21:14:27 +02:00
Paul Bolle a466391139 kconfig: add unexpected data itself to warning
If the .config parser runs into unexpected data it emits warnings like:
    .config:6911:warning: unexpected data

Add the unexpected data itself to this warning. That makes it easier to
discover what is actually going wrong:
     .config:6911:warning: unexpected data: CONFOG_CHARGER_TPS65217=m

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-10 17:20:19 +02:00
Benjamin Poirier 5bcba792bb localmodconfig: Fix whitespace repeat count after "tristate"
Also recognize standalone "prompt".

Before this patch we incorrectly identified some symbols as not having a
prompt and potentially needing to be selected by something else.

Note that this patch could theoretically change the resulting .config,
causing it to have fewer symbols turned on. However, given the current set
of Kconfig files, this situation does not occur because the symbols newly
added to %prompts are absent from %selects.

Link: http://lkml.kernel.org/r/1461696998-3953-1-git-send-email-bpoirier@suse.com

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-26 18:35:16 -04:00
Benjamin Poirier 96bab35d1c localmodconfig: Reset certificate paths
When using `make localmodconfig` and friends, if the input config comes
from a kernel that was built in a different environment (for example, the
canonical case of using localmodconfig to trim a distribution kernel
config) the key files for module signature checking will not be available
and should be regenerated or omitted. Otherwise, the user will be faced
with annoying errors when trying to build with the generated .config:

make[1]: *** No rule to make target 'keyring.crt', needed by 'certs/x509_certificate_list'.  Stop.
Makefile:1576: recipe for target 'certs/' failed

Link: http://lkml.kernel.org/r/1461696721-3001-1-git-send-email-bpoirier@suse.com

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-26 15:48:20 -04:00
Benjamin Poirier 5169192bc1 localmodconfig: Add missing $ to reference a variable
That is clearly what the original intention was. This does not change the
output .config but it prevents some useless processing.

! eq "m" is changed to the simpler eq "y"; symbols with values other than
m|y are not included in %orig_configs.

Link: http://lkml.kernel.org/r/1460333193-16361-3-git-send-email-bpoirier@suse.com

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-26 10:06:59 -04:00
Benjamin Poirier a77ed525d0 localmodconfig: Fix parsing of "help" text
Help text may start with "help" or "---help---". This patch fixes
read_kconfig() to recognize the second variant.

This removes useless junk from %depends and %selects. That junk is due to
help text that contains the words "selects" and "depends".

Link: http://lkml.kernel.org/r/1460333193-16361-2-git-send-email-bpoirier@suse.com

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-26 10:05:01 -04:00
Benjamin Poirier 27b7156886 localmodconfig: Recognize more keywords that end a menu entry
Based on the list in Documentation/kbuild/kconfig-language.txt

This removes junk from %depends because parsing of a menu entry spilled
over to another menu entry.

Link: http://lkml.kernel.org/r/1460333193-16361-1-git-send-email-bpoirier@suse.com

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-26 10:04:42 -04:00
Benjamin Poirier 296471ad51 localmodconfig: Fix parsing of Kconfig "source" statements
The parameter of Kconfig "source" statements does not need to be quoted.
The current regex causes many kconfig files to be skipped and hence,
dependencies to be missed.

Also fix the whitespace repeat count.

Link: http://lkml.kernel.org/r/1459619722-13695-1-git-send-email-bpoirier@suse.com

Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-26 09:59:21 -04:00
Al Viro 6b87b70c53 unbreak allmodconfig KCONFIG_ALLCONFIG=...
Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used
to be equivalent to make allmodconfig; these days it hardwires MODULES to n.
In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is
treated as if it set it to n.

	Regression had been introduced by commit cfa98f ("kconfig: do not
override symbols already set"); what happens is that conf_read_simple()
does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and
has conf_set_all_new_symbols() skip modules_sym.

	It's pretty easy to fix - simply move that call of sym_calc_value()
into the callers, except for the ones in KCONFIG_ALLCONFIG handling.
Objections?

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: cfa98f2e0a ("kconfig: do not override symbols already set")
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-02-01 15:12:40 +01:00
Jan Beulich 42f9d3c688 scripts/kconfig: allow building with make 3.80 again
Documentation/Changes still lists this as the minimal required version,
so it ought to remain usable for the time being.

Fixes: d2036f30cf ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-02-01 12:11:27 +01:00
Chris Bainbridge 5b61c7bd25 kconfig: fix qconf segfault by deleting heap objects
On Debian stable (qt-4.8.6) 'make xconfig' intermittently fails due to
qconf segfaulting at exit time in QXcbEventReader. The cause of this is
destructors on the heap objects never being called, so fix this by
properly deleting the heap objects before exit.

Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-01-11 09:45:08 +01:00
Vegard Nossum aab24a897c kconfig: return 'false' instead of 'no' in bool function
menu_is_visible() is a bool function and should use boolean return
values. "no" is a tristate value which happens to also have a value
of 0, but we should nevertheless use the right symbol for it.

This is a very minor cleanup with no semantic change.

Fixes: 86e187ff9 ("kconfig: add an option to determine a menu's visibility")
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-01-05 11:19:13 +01:00
Markus Mayer 74dba80913 kconfig: allow kconfig to handle longer path names
The current (arbitrary) limit of 128 characters for path names has
proven too short for Android builds, as longer path names are used
there.

Change conf.c, so it can handle path lengths up to PATH_MAX characters.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-12-10 11:06:10 +01:00
Linus Torvalds 152813e6e4 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:

 - 'make xconfig' ported to Qt5, dropping support for Qt3

 - merge_config.sh supports a single-input-file mode and also respects
   $KCONFIG_CONFIG

 - Fix for incorrect display of >= and > in dependency expressions

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits)
  Add current selection check.
  Use pkg-config to find Qt 4 and 5 instead of direct qmake
  kconfig: Fix copy&paste error
  kconfig/merge_config.sh: Accept a single file
  kconfig/merge_config.sh: Support KCONFIG_CONFIG
  Update the buildsystem for KConfig finding Qt
  Port xconfig to Qt5 - Update copyright.
  Port xconfig to Qt5 - Fix goParent issue.
  Port xconfig to Qt5 - on Back clicked, deselect old item.
  Port xconfig to Qt5 - Add(back) one click checkbox toggle.
  Port xconfig to Qt5 - Add(back) lineedit editing.
  Port xconfig to Qt5 - Remove some commented code.
  Port xconfig to Qt5 - Source format.
  Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
  Port xconfig to Qt5 - Change ConfigItem constructor parent type.
  Port xconfig to Qt5 - Disable ConfigList soring
  Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
  Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
  Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
  Port xconfig to Qt5 - Tree widget set column titles.
  ...
2015-11-10 21:06:50 -08:00
Boris Barbulovski be596aaa74 Add current selection check.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
[mmarek: I missed it in the original Qt5 patch set, which caused a crash]
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-11-02 21:43:58 +01:00
Thiago Macieira 588446a847 Use pkg-config to find Qt 4 and 5 instead of direct qmake
The Qt Project recommendation is that there should always be a "qmake"
binary and it should never be renamed. If it's necessary to handle
multiple Qt versions, the Qt Project recommends using qtchooser.

Unfortunately, some distros do not follow the recommendation, so we
would need to check qmake-qt4, qmake-qt5, etc. So, instead, let's try
pkg-config.

Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-11-02 21:43:09 +01:00
Michal Sojka f6aad2615c kconfig: Fix copy&paste error
Fixes: 31847b67be ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-10-20 19:13:14 +02:00
Michael Ellerman bd960f0983 scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O=
My recent commit d2036f30cf ("scripts/kconfig/Makefile: Allow
KBUILD_DEFCONFIG to be a target"), contained a bug in that when it
checks if KBUILD_DEFCONFIG is a file it forgets to prepend $(srctree) to
the path.

This causes the build to fail when building out of tree (with O=), and
when the value of KBUILD_DEFCONFIG is 'defconfig'. In that case we will
fail to find the 'defconfig' file, because we look in the build
directory not $(srctree), and so we will call Make again with
'defconfig' as the target. From there we loop infinitely calling 'make
defconfig' again and again.

The fix is simple, we need to look for the file under $(srctree).

Fixes: d2036f30cf ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:42 +11:00
Gabriel de Perthuis 2163e7b38f kconfig/merge_config.sh: Accept a single file
merge_config.sh can usefully be applied to a single file.
It implicitly merges with the default configuration.

Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 16:19:37 +02:00
Gabriel de Perthuis ed94fea5ba kconfig/merge_config.sh: Support KCONFIG_CONFIG
All make targets support $KCONFIG_CONFIG because they
run scripts/kconf.  Make sure merge_config.sh accesses the
correct file in all cases.

Previously this script broke in two different code paths,
one for targets like kvmconfig (which use merge_config.sh -m
then call a target that respects KCONFIG_CONFIG) and one for
direct use of the script without -m, which called make rules
that edit KCONFIG_CONFIG but verified a different file.

Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 16:19:33 +02:00
Thiago Macieira d1b0dc90ab Update the buildsystem for KConfig finding Qt
The buildsystem will now only search for Qt 4 and Qt 5. Support for Qt 2
and 3 was dropped in the previous commits (Qt 3 was EOL'ed in 2010 or
so...).

For Qt 5, to be future-proof with the future direction notice appearing
in the 5.5 release, C++11 support is automatically enabled.

Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski b4ff1de3b8 Port xconfig to Qt5 - Update copyright.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski ee7298fbc0 Port xconfig to Qt5 - Fix goParent issue.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski 5df9da9df2 Port xconfig to Qt5 - on Back clicked, deselect old item.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski 76d53cbbae Port xconfig to Qt5 - Add(back) one click checkbox toggle.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:04 +02:00
Boris Barbulovski e336b9f132 Port xconfig to Qt5 - Add(back) lineedit editing.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:04 +02:00
Boris Barbulovski 5c60014b4e Port xconfig to Qt5 - Remove some commented code.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:04 +02:00
Boris Barbulovski b3c48f964c Port xconfig to Qt5 - Source format.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski f999cc06f9 Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski d960b98899 Port xconfig to Qt5 - Change ConfigItem constructor parent type.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski a5225e9bc9 Port xconfig to Qt5 - Disable ConfigList soring
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski 5c6f1554ba Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
ConfigItem executes parent->takeChild(0)

while

ConfigList executes parent->takeTopLevelItem(0)

Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski dbf629331a Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00