Commit Graph

27 Commits

Author SHA1 Message Date
Sam Ravnborg ec7748b59e ide: introduce HAVE_IDE
To allow flexible configuration of IDE introduce HAVE_IDE.
All archs except arm, um and s390 unconditionally select it.
For arm the actual configuration determine if IDE is supported.

This is a step towards introducing drivers/Kconfig for arm.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09 10:46:40 +01:00
H. Peter Anvin bdc807871d avoid overflows in kernel/time.c
When the conversion factor between jiffies and milli- or microseconds is
not a single multiply or divide, as for the case of HZ == 300, we currently
do a multiply followed by a divide.  The intervening result, however, is
subject to overflows, especially since the fraction is not simplified (for
HZ == 300, we multiply by 300 and divide by 1000).

This is exposed to the user when passing a large timeout to poll(), for
example.

This patch replaces the multiply-divide with a reciprocal multiplication on
32-bit platforms.  When the input is an unsigned long, there is no portable
way to do this on 64-bit platforms there is no portable way to do this
since it requires a 128-bit intermediate result (which gcc does support on
64-bit platforms but may generate libgcc calls, e.g.  on 64-bit s390), but
since the output is a 32-bit integer in the cases affected, just simplify
the multiply-divide (*3/10 instead of *300/1000).

The reciprocal multiply used can have off-by-one errors in the upper half
of the valid output range.  This could be avoided at the expense of having
to deal with a potential 65-bit intermediate result.  Since the intent is
to avoid overflow problems and most of the other time conversions are only
semiexact, the off-by-one errors were considered an acceptable tradeoff.

At Ralf Baechle's suggestion, this version uses a Perl script to compute
the necessary constants.  We already have dependencies on Perl for kernel
compiles.  This does, however, require the Perl module Math::BigInt, which
is included in the standard Perl distribution starting with version 5.8.0.
In order to support older versions of Perl, include a table of canned
constants in the script itself, and structure the script so that
Math::BigInt isn't required if pulling values from said table.

Running the script requires that the HZ value is available from the
Makefile.  Thus, this patch also adds the Kconfig variable CONFIG_HZ to the
architectures which didn't already have it (alpha, cris, frv, h8300, m32r,
m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or
sh64 architectures, since Paul Mundt has dealt with those separately in the
sh tree.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Paul Mundt <lethal@linux-sh.org>,
Cc: Richard Henderson <rth@twiddle.net>,
Cc: Michael Starvik <starvik@axis.com>,
Cc: David Howells <dhowells@redhat.com>,
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
Cc: Hirokazu Takata <takata@linux-m32r.org>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>,
Cc: William L. Irwin <sparclinux@vger.kernel.org>,
Cc: Chris Zankel <chris@zankel.net>,
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:39 -08:00
David Howells 7038220aa5 FRV: permit the memory to be located elsewhere in NOMMU mode
Permit the memory to be located somewhere other than address 0xC0000000 in
NOMMU mode.  The configuration options are already present, it just
requires wiring up in the linker script.

Note that only a limited set of locations of runtime addresses are available
because of the way the CPU protection registers work.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:20 -08:00
Linus Torvalds f5bb3a5e9d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits)
  Jesper Juhl is the new trivial patches maintainer
  Documentation: mention email-clients.txt in SubmittingPatches
  fs/binfmt_elf.c: spello fix
  do_invalidatepage() comment typo fix
  Documentation/filesystems/porting fixes
  typo fixes in net/core/net_namespace.c
  typo fix in net/rfkill/rfkill.c
  typo fixes in net/sctp/sm_statefuns.c
  lib/: Spelling fixes
  kernel/: Spelling fixes
  include/scsi/: Spelling fixes
  include/linux/: Spelling fixes
  include/asm-m68knommu/: Spelling fixes
  include/asm-frv/: Spelling fixes
  fs/: Spelling fixes
  drivers/watchdog/: Spelling fixes
  drivers/video/: Spelling fixes
  drivers/ssb/: Spelling fixes
  drivers/serial/: Spelling fixes
  drivers/scsi/: Spelling fixes
  ...
2008-02-04 07:58:52 -08:00
Adrian Bunk 0868ff7a42 move frv docs one level up
My first guess for "fujitsu" was it might be related to the
fujitsu-laptop.c driver...

Move the frv directory one level up since frv is the name of the
architecture in the Linux kernel.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:54:28 +02:00
Mathieu Desnoyers 125e564582 Move Kconfig.instrumentation to arch/Kconfig and init/Kconfig
Move the instrumentation Kconfig to

arch/Kconfig for architecture dependent options
  - oprofile
  - kprobes

and

init/Kconfig for architecture independent options
  - profiling
  - markers

Remove the "Instrumentation Support" menu. Everything moves to "General setup".
Delete the kernel/Kconfig.instrumentation file.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:58:08 +01:00
Linus Torvalds 687fcdf741 Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (38 commits)
  suspend: cleanup reference to swsusp_pg_dir[]
  PM: Remove obsolete /sys/devices/.../power/state docs
  Hibernation: Invoke suspend notifications after console switch
  Suspend: Invoke suspend notifications after console switch
  Suspend: Clean up suspend_64.c
  Suspend: Add config option to disable the freezer if architecture wants that
  ACPI: Print message before calling _PTS
  ACPI hibernation: Call _PTS before suspending devices
  Hibernation: Introduce begin() and end() callbacks
  ACPI suspend: Call _PTS before suspending devices
  ACPI: Separate disabling of GPEs from _PTS
  ACPI: Separate invocations of _GTS and _BFS from _PTS and _WAK
  Suspend: Introduce begin() and end() callbacks
  suspend: fix ia64 allmodconfig build
  ACPI: clear GPE earily in resume to avoid warning
  Suspend: Clean up Kconfig (V2)
  Hibernation: Clean up Kconfig (V2)
  Hibernation: Update messages
  Suspend: Use common prefix in messages
  Hibernation: Remove unnecessary variable declaration
  ...
2008-02-02 14:29:57 +11:00
Johannes Berg f4cb570076 Suspend: Clean up Kconfig (V2)
This cleans up the suspend Kconfig and removes the need to
declare centrally which architectures support suspend. All
architectures that currently support suspend are modified
accordingly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Adrian Bunk 8f0e7d2405 PCI: Kconfig help: don't refer to the PCI-HOWTO
A HOWTO that hasn't been updated for half a dozen years no longer
"contains valuable information about which PCI hardware does work under
Linux and which doesn't".

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:26 -08:00
Mathieu Desnoyers 09cadedbdc Combine instrumentation menus in kernel/Kconfig.instrumentation
Quoting Randy:

"It seems sad that this patch sources Kconfig.marker, a 7-line file,
20-something times.  Yes, you (we) don't want to put those 7 lines into
20-something different files, so sourcing is the right thing.

However, what you did for avr32 seems more on the right track to me: make
_one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES,
and MARKERS and then use (source) that in all of the arches."

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:54 -07:00
Christoph Lameter 0aa817f078 Slab allocators: define common size limitations
Currently we have a maze of configuration variables that determine the
maximum slab size.  Worst of all it seems to vary between SLAB and SLUB.

So define a common maximum size for kmalloc.  For conveniences sake we use
the maximum size ever supported which is 32 MB.  We limit the maximum size
to a lower limit if MAX_ORDER does not allow such large allocations.

For many architectures this patch will have the effect of adding large
kmalloc sizes.  x86_64 adds 5 new kmalloc sizes.  So a small amount of
memory will be needed for these caches (contemporary SLAB has dynamically
sizeable node and cpu structure so the waste is less than in the past)

Most architectures will then be able to allocate object with sizes up to
MAX_ORDER.  We have had repeated breakage (in fact whenever we doubled the
number of supported processors) on IA64 because one or the other struct
grew beyond what the slab allocators supported.  This will avoid future
issues and f.e.  avoid fixes for 2k and 4k cpu support.

CONFIG_LARGE_ALLOCS is no longer necessary so drop it.

It fixes sparc64 with SLAB.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:23:04 -07:00
Christoph Lameter 8defab3377 FRV: Replace pgd management via slabs through quicklists
This is done in order to be able to run SLUB which expects no modifications
to its page structs.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:46 -07:00
Christoph Lameter 81819f0fc8 SLUB core
This is a new slab allocator which was motivated by the complexity of the
existing code in mm/slab.c. It attempts to address a variety of concerns
with the existing implementation.

A. Management of object queues

   A particular concern was the complex management of the numerous object
   queues in SLAB. SLUB has no such queues. Instead we dedicate a slab for
   each allocating CPU and use objects from a slab directly instead of
   queueing them up.

B. Storage overhead of object queues

   SLAB Object queues exist per node, per CPU. The alien cache queue even
   has a queue array that contain a queue for each processor on each
   node. For very large systems the number of queues and the number of
   objects that may be caught in those queues grows exponentially. On our
   systems with 1k nodes / processors we have several gigabytes just tied up
   for storing references to objects for those queues  This does not include
   the objects that could be on those queues. One fears that the whole
   memory of the machine could one day be consumed by those queues.

C. SLAB meta data overhead

   SLAB has overhead at the beginning of each slab. This means that data
   cannot be naturally aligned at the beginning of a slab block. SLUB keeps
   all meta data in the corresponding page_struct. Objects can be naturally
   aligned in the slab. F.e. a 128 byte object will be aligned at 128 byte
   boundaries and can fit tightly into a 4k page with no bytes left over.
   SLAB cannot do this.

D. SLAB has a complex cache reaper

   SLUB does not need a cache reaper for UP systems. On SMP systems
   the per CPU slab may be pushed back into partial list but that
   operation is simple and does not require an iteration over a list
   of objects. SLAB expires per CPU, shared and alien object queues
   during cache reaping which may cause strange hold offs.

E. SLAB has complex NUMA policy layer support

   SLUB pushes NUMA policy handling into the page allocator. This means that
   allocation is coarser (SLUB does interleave on a page level) but that
   situation was also present before 2.6.13. SLABs application of
   policies to individual slab objects allocated in SLAB is
   certainly a performance concern due to the frequent references to
   memory policies which may lead a sequence of objects to come from
   one node after another. SLUB will get a slab full of objects
   from one node and then will switch to the next.

F. Reduction of the size of partial slab lists

   SLAB has per node partial lists. This means that over time a large
   number of partial slabs may accumulate on those lists. These can
   only be reused if allocator occur on specific nodes. SLUB has a global
   pool of partial slabs and will consume slabs from that pool to
   decrease fragmentation.

G. Tunables

   SLAB has sophisticated tuning abilities for each slab cache. One can
   manipulate the queue sizes in detail. However, filling the queues still
   requires the uses of the spin lock to check out slabs. SLUB has a global
   parameter (min_slab_order) for tuning. Increasing the minimum slab
   order can decrease the locking overhead. The bigger the slab order the
   less motions of pages between per CPU and partial lists occur and the
   better SLUB will be scaling.

G. Slab merging

   We often have slab caches with similar parameters. SLUB detects those
   on boot up and merges them into the corresponding general caches. This
   leads to more effective memory use. About 50% of all caches can
   be eliminated through slab merging. This will also decrease
   slab fragmentation because partial allocated slabs can be filled
   up again. Slab merging can be switched off by specifying
   slub_nomerge on boot up.

   Note that merging can expose heretofore unknown bugs in the kernel
   because corrupted objects may now be placed differently and corrupt
   differing neighboring objects. Enable sanity checks to find those.

H. Diagnostics

   The current slab diagnostics are difficult to use and require a
   recompilation of the kernel. SLUB contains debugging code that
   is always available (but is kept out of the hot code paths).
   SLUB diagnostics can be enabled via the "slab_debug" option.
   Parameters can be specified to select a single or a group of
   slab caches for diagnostics. This means that the system is running
   with the usual performance and it is much more likely that
   race conditions can be reproduced.

I. Resiliency

   If basic sanity checks are on then SLUB is capable of detecting
   common error conditions and recover as best as possible to allow the
   system to continue.

J. Tracing

   Tracing can be enabled via the slab_debug=T,<slabcache> option
   during boot. SLUB will then protocol all actions on that slabcache
   and dump the object contents on free.

K. On demand DMA cache creation.

   Generally DMA caches are not needed. If a kmalloc is used with
   __GFP_DMA then just create this single slabcache that is needed.
   For systems that have no ZONE_DMA requirement the support is
   completely eliminated.

L. Performance increase

   Some benchmarks have shown speed improvements on kernbench in the
   range of 5-10%. The locking overhead of slub is based on the
   underlying base allocation size. If we can reliably allocate
   larger order pages then it is possible to increase slub
   performance much further. The anti-fragmentation patches may
   enable further performance increases.

Tested on:
i386 UP + SMP, x86_64 UP + SMP + NUMA emulation, IA64 NUMA + Simulator

SLUB Boot options

slub_nomerge		Disable merging of slabs
slub_min_order=x	Require a minimum order for slab caches. This
			increases the managed chunk size and therefore
			reduces meta data and locking overhead.
slub_min_objects=x	Mininum objects per slab. Default is 8.
slub_max_order=x	Avoid generating slabs larger than order specified.
slub_debug		Enable all diagnostics for all caches
slub_debug=<options>	Enable selective options for all caches
slub_debug=<o>,<cache>	Enable selective options for a certain set of
			caches

Available Debug options
F		Double Free checking, sanity and resiliency
R		Red zoning
P		Object / padding poisoning
U		Track last free / alloc
T		Trace all allocs / frees (only use for individual slabs).

To use SLUB: Apply this patch and then select SLUB as the default slab
allocator.

[hugh@veritas.com: fix an oops-causing locking error]
[akpm@linux-foundation.org: various stupid cleanups and small fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:53 -07:00
Christoph Lameter 66701b1499 [PATCH] optional ZONE_DMA: introduce CONFIG_ZONE_DMA
This patch simply defines CONFIG_ZONE_DMA for all arches.  We later do special
things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work
without ZONE_DMA.

CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture
handles ISA DMA.

First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch
needs ZONE_DMA because ISA DMA devices are supported.  We can catch this in
mm/Kconfig and do not need to modify arch code.

Second, arches may use ZONE_DMA in an unknown way.  We set CONFIG_ZONE_DMA for
all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards
compatibility.  The arches may later undefine ZONE_DMA if their arch code has
been verified to not depend on ZONE_DMA.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:18 -08:00
David Howells f0d1b0b30d [PATCH] LOG2: Implement a general integer log2 facility in the kernel
This facility provides three entry points:

	ilog2()		Log base 2 of unsigned long
	ilog2_u32()	Log base 2 of u32
	ilog2_u64()	Log base 2 of u64

These facilities can either be used inside functions on dynamic data:

	int do_something(long q)
	{
		...;
		y = ilog2(x)
		...;
	}

Or can be used to statically initialise global variables with constant values:

	unsigned n = ilog2(27);

When performing static initialisation, the compiler will report "error:
initializer element is not constant" if asked to take a log of zero or of
something not reducible to a constant.  They treat negative numbers as
unsigned.

When not dealing with a constant, they fall back to using fls() which permits
them to use arch-specific log calculation instructions - such as BSR on
x86/x86_64 or SCAN on FRV - if available.

[akpm@osdl.org: MMC fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00
David Howells 339b0c0813 [PATCH] FRV: Permit large kmalloc allocations [try #2]
Permit kmalloc() to make allocations of up to 32MB if so configured.  This
may be useful under NOMMU conditions where vmalloc() can't do this.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:03:40 -07:00
David Howells af8c65b57a [PATCH] FRV: permit __do_IRQ() to be dispensed with
Permit __do_IRQ() to be dispensed with based on a configuration option.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
David Howells 1bcbba3060 [PATCH] FRV: Use the generic IRQ stuff
Make the FRV arch use the generic IRQ code rather than having its own
routines for doing so.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
john stultz ebd6c17109 [PATCH] FRV: Use the generic time stuff for FRV
Use the generic time stuff for FRV.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-06 11:00:02 -07:00
Akinobu Mita 1f6d7a93c1 [PATCH] bitops: frv: use generic bitops
- remove ffz()
- remove find_{next,first}{,_zero}_bit()
- remove generic_ffs()
- remove __ffs()
- remove generic_fls64()
- remove sched_find_first_bit()
- remove generic_hweight{32,16,8}()
- remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit()
- remove minix_{test,set,test_and_clear,test,find_first_zero}_bit()

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:12 -08:00
Ingo Molnar 06027bdd27 [PATCH] hrtimer: round up relative start time on low-res arches
CONFIG_TIME_LOW_RES is a temporary way for architectures to signal that
they simply return xtime in do_gettimeoffset().  In this corner-case we
want to round up by resolution when starting a relative timer, to avoid
short timeouts.  This will go away with the GTOD framework.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 16:09:35 -08:00
Adrian Bunk 2308acca65 [PATCH] "tiny-make-id16-support-optional" fixes
It seems the "make UID16 support optional" patch was checked when it
edited the -tiny tree some time ago, but it wasn't checked whether it
still matches the current situation when it was submitted for inclusion
in -mm. This patch fixes the following bugs:
- ARCH_S390X does no longer exist, nowadays this has to be expressed
  through (S390 && 64BIT)
- in five architecture specific Kconfig files the UID16 options
  weren't removed

Additionally, it changes the fragile negative dependencies of UID16 to
positive dependencies (new architectures are more likely to not require
UID16 support).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:23 -08:00
David Howells f8aec7573b [PATCH] frv: force serial driver inclusion
Force the 8230 serial driver to be built in if the on-CPU UARTs are to be
used.  It can't be used as a module because the arch setup needs to call into
it.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:38 -08:00
David Howells 7a75831390 [PATCH] frv: fix PCMCIA configuration
Fix PCMCIA configuration for FRV by including the stock PCMCIA configuration
description file.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:37 -08:00
Sam Ravnborg d5950b4355 [NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:03:49 -07:00
Dave Hansen 3f22ab276b [PATCH] make each arch use mm/Kconfig
For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00