Commit Graph

152 Commits

Author SHA1 Message Date
Clemens Ladisch f38cc317c0 [ALSA] usb-audio: add PCR-A PCM support
Add support for the PCM interfaces of the Edirol PCR-A.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-14 08:38:25 +01:00
Jiri Kosina 596f967f50 [ALSA] usbaudio - remove urb->bandwidth reference
Recent changes in usbcore removed the bandwidth field from struct urb.
Remove the occurence in usbaudio.c

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-14 08:38:23 +01:00
Bjoern Fay d0b0fac14e [ALSA] usbaudio - Add support for Edirol UA-101
Added support for the Edirol UA-101 (only in high-speed mode) by taking
the quirks for the UA-1000 and change them accordingly. Changes were
made in 'usbaudio.c', 'usbaudio.h', and 'usbquirks.h'
MIDI and recording seem to work perfectly (with JACK), but playback
gives some few glitches. I think that's the mentioned
synchronizing-problem in the UA-1000 quirk ('FIXME: playback must be
synchronized to capture'), so I didn't change that.
ToDo: Adding Mixer-Support for the built-in
control-panel/patch-bay/router.

Signed-off-by: Bjoern Fay <mail@bfay.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:53 +01:00
Takashi Iwai 8fec560d9b [ALSA] usbaudio - Fix Oops with unconventional sample rates
The patch fixes the memory corruption by the support of unconventional
sample rates.  Also, it avoids the too restrictive constraints if
any of usb descriptions contain continuous rates.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:29 +01:00
Gregor Jasny beb60119bc [ALSA] usbaudio - Fix Oops with broken usb descriptors
This is a patch for ALSA Bug #2724. Some webcams provide bogus
settings with no valid rates. With this patch those are skipped.

Signed-off-by: Gregor Jasny <gjasny@web.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:03:26 +01:00
John Daiker 88518275e3 [ALSA] usbaudio.c: remove unneeded casts
Went rummaging through usbaudio.c and found some castings that
aren't needed as far as I can see.  Part of the KernelJanitors
TODO list.

Signed-off-by: John Daiker <daikerjohn@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:02:47 +01:00
Clemens Ladisch e4f8e656d8 [ALSA] usb-audio: allow pausing
Add pause capabilities for both USB playback and capture streams.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:00:02 +01:00
Clemens Ladisch 1700f3080d [ALSA] usb-audio: merge playback/capture hardware information structs
The hardware information structures for playback and capture streams,
respectively, are the same, so we can use just one structure for both
streams.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:00:00 +01:00
Karsten Wiese bc6191b100 [ALSA] Repair snd-usb-usx2y over OHCI
The previous patch 'Repair snd-usb-usx2y for usb 2.6.18' assumed
urb->start_frame roll over beyond MAX_INT for both UHCI & OHCI.
This isn't true until now (kernel 2.6.20).
Fix this by only looking at the common between OHCI & UHCI Frame number
range.
This is for mainline and stable kernels >= 2.6.18.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-01-23 09:23:36 +01:00
Takashi Iwai 2a2a5dddec [ALSA] usbaudio - Fix kobject_add() error at reconnection
Fixed the error from kobject_add() at reconnection the usb audio device.
This happens when an app keeps opening a device while the device is
replugged, due to the confliction of the internal bookkept index and
the really empty slot.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-01-09 09:14:15 +01:00
Mariusz Kozlowski 7fbe3ca571 [ALSA] usb: usbmixer error path fix
Without the patch below namelist[0] will not be freed in case
of kmalloc error.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-01-09 09:06:19 +01:00
Clemens Ladisch 987411b7d8 [ALSA] usb-audio: work around wrong frequency in CM6501 descriptors
The C-Media CM6501 chip's descriptors say that altsetting 5 supports
48 kHz, but it actually plays at 96 kHz.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-01-09 09:06:15 +01:00
Tobias Klauser cf78bbc4b1 [ALSA] sound/usb/usbaudio: Handle return value of usb_register()
Handle the return value of usb_register() in the module_init function.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20 08:55:31 +01:00
Nick Piggin cd54e7e543 [PATCH] mm: incorrect VM_FAULT_OOM returns from drivers
Some drivers are returning OOM when it is not in response to a memory
shortage.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:20 -08:00
Mariusz Kozlowski 68df9de1d0 usb: usbmixer free kill urb cleanup
- usb_free_urb() cleanup
- usb_kill_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:35 -08:00
Mariusz Kozlowski f5e135af87 usb: usbmidi kill urb cleanup
- usb_kill_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:35 -08:00
Takashi Iwai de1b8b93a0 [ALSA] Fix hang-up at disconnection of usb-audio
Fix hang-up at disconnection of usb-audio devices while accessing PCM.
Don't handle PCM operations any more after shutdown flag is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-11-28 13:46:38 +01:00
Karsten Wiese 635bbb355e [ALSA] Repair snd-usb-usx2y for usb 2.6.18
urb->start_frame rolls over beyond MAX_INT now.
This is for stable kernel and stable alsa.

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-06 20:23:02 +02:00
Karsten Wiese 9b08c2aa54 [ALSA] Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()
Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()
substream can be NULL......
in mainline, bug was introduced by:
2006-06-22  [ALSA] Add O_APPEND flag support to PCM

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-06 20:23:01 +02:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Alexey Dobriyan 52978be636 [PATCH] kmemdup: some users
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:19 -07:00
Pete Zaitcev 38e2bfc94e USB: Dealias -110 code (more complete)
The purpose of this patch is to split off the case when a device does
not reply on the lower level (which is reported by HC hardware), and
a case when the device accepted the request, but does not reply at
upper level. This redefinition allows to diagnose issues easier,
without asking the user if the -110 happened "immediately".

The usbmon splits such cases already thanks to its timestamp, but
it's not always available.

I adjusted all drivers which I found affected (by searching for "urb").
Out of tree drivers may suffer a little bit, but I do not expect much
breakage. At worst they may print a few messages.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:59:00 -07:00
Clemens Ladisch fef8a0c03d [ALSA] usb-audio: add mixer control names for the Aureon 5.1 MkII
Add a mixer name map for the TerraTec Aureon 5.1 MkII USB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:48:30 +02:00
Clemens Ladisch 92b9ac78f9 [ALSA] usb-audio: increase number of packets per URB
To decrease the USB interrupts rate, increase both the default and the
maximum number of packets per URB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:48:17 +02:00
Luke Ross a79eee8d3d [ALSA] Support for non-standard rates in USB audio driver
There's at least one USB audio chipset out there which supports only one
non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other
patches for this card which are unsatisfactory because they attempt to
map this rate to 44.1k leading to sound distortion.
The patch below uses SNDRV_PCM_RATE_KNOT to properly support the
non-standard rates where they are available.

Signed-off-by: Luke Ross <luke@lukeross.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:44:58 +02:00
Takashi Iwai 727f317a10 [ALSA] usb-audio - Fix a typo of CONFIG_PROC_FS
Fixed a typo of CONFIG_PROC_FS in usbaudio.c.
The stream proc file appears again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:40:04 +02:00
Clemens Ladisch f1265391ea [ALSA] usb-audio: add more Yamaha devices
Add some quirks for some unknown Yamaha USB MIDI devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:38:22 +02:00
Takashi Iwai 7bc5ba7e02 [ALSA] Add TLV support to snd-usb-audio driver
Added TLV-read support to snd-usb-audio driver for passing
the volume dB scale information to user-space.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:37:54 +02:00
Takashi Iwai c461482c80 [ALSA] Unregister device files at disconnection
Orignally proposed by Sam Revitch <sam.revitch@gmail.com>.
Unregister device files at disconnection to avoid the futher accesses.
Also, the dev_unregister callback is removed and replaced with the
combination of disconnect + free.
A new function snd_card_free_when_closed() is introduced, which is
used in USB disconnect callback.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:36:58 +02:00
Panagiotis Issaris 59feddb25f [ALSA] Conversions from kmalloc+memset to k(z|c)alloc
sound: Conversions from kmalloc+memset to k(c|z)alloc.

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-08-03 15:21:18 +02:00
Sam Revitch e217e30c35 [ALSA] usb-audio support for Turtle Beach Roadie
From: Sam Revitch <sam.revitch@gmail.com>Recently a Turtle Beach Audio Advantage Roadie device ended up in my
possession.  It seems to work with the snd-usb-audio driver, but only
using the headphone jack in 2-channel mode.  The device has a DIN
connector carrying six more channels that are otherwise silent.
C-Media has freely available documentation for the CM106 chip around
which this device is based, and enabling 8-channel output, or
6-channel output with the headphone jack following the front pair is a
matter of setting one of its registers.
Attached is a patch to try to enable 5.1 output mode at probe time.
It seems to work correctly with my device.  There is quite list of
other configurables for this device that might deserve controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28 19:30:39 +02:00
Ben Williamson c4a87ef4de [ALSA] USB midi: Remove duplicate CS_AUDIO_* #defines
Removed the CS_AUDIO_* #defines, which were duplicates of the
class-specific USB_DT_CS_* #defines in <linux/usb_ch9.h>.

Signed-off-by: Ben Williamson <ben.williamson@greyinnovation.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:34:31 +02:00
Takashi Iwai f8c7579051 [ALSA] usbaudio - Fix a typo
Fix a typo introduced by the last fix.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:50 +02:00
Clemens Ladisch faf8d11743 [ALSA] usb-audio: add workaround for CSR Bluetooth Headphones (Saitek A-250)
Some devices don't have the required class-specific endpoint descriptors.
Instead of making this case an error, this patch makes the driver guess the
endpoint attributes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22 21:33:47 +02:00
Raimonds Cicans 4d1a70dad0 [ALSA] add support for SB Live! 24-Bit External remote control
This patch rewrites the remote control code to use a table for
the peculiarities of the various SB models, and adds support
for a third model.

Signed-off-by: Raimonds Cicans <ray@vardes.lv>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22 21:33:30 +02:00
Clemens Ladisch a7b928ac5f [ALSA] rawmidi: add get_port_info callback for sequencer information flags
Add a get_port_info callback to the snd_rawmidi_global_ops structure to
allow the USB MIDI driver to supply information flags for the sequencer
ports created by seq_midi.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22 21:33:20 +02:00
Takashi Iwai 0df63e44c3 [ALSA] Add O_APPEND flag support to PCM
Added O_APPEND flag support to PCM to enable shared substreams
among multiple processes.  This mechanism is used by dmix and
dsnoop plugins.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:13 +02:00
Takashi Iwai bf850204a7 [ALSA] Remove unneeded read/write_size fields in proc text ops
Remove unneeded read/write_size fields in proc text ops.
snd_info_set_text_ops() is fixed, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:09 +02:00
Clemens Ladisch bc56eff127 [ALSA] add another Phase 26 quirk
Add a quirk entry for the TerraTec Phase 26 with yet another product ID.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-04-27 21:10:04 +02:00
Takashi Iwai 14790f1c73 [ALSA] Test volume resolution of usb audio at initialization
Test the volume of usb audio whether actually it works and adjusts
the resolution value according to it.

Some USB audio devices report a lower resolution than it reacts.
The only possible check is to write and read a volume value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Alexey Dobriyan 7f927fcc2f [PATCH] Typo fixes
Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Jesper Juhl 878b478919 [ALSA] fix resource leak in usbmixer
Modules: USB generic driver

We may leak 'namelist' in sound/usb/usbmixer.c::parse_audio_selector_unit()

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22 10:39:28 +01:00
Clemens Ladisch c7a93b852b [ALSA] usb-audio: add Maya44 mixer control names
Modules: USB generic driver

Add mixer control names for the AudioTrak Maya44 USB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:39:11 +01:00
Clemens Ladisch 9808dc962f [ALSA] usb-audio: add Casio PL-40R support
Modules: USB generic driver

Add a quirk entry for the Casio PL-40R.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:39:07 +01:00
Clemens Ladisch 4ccb4a4387 [ALSA] usb-audio: add MDP-5/EZ-J24 support
Modules: USB generic driver

Add support for the Yamaha MDP-5 and EZ-J24.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:38:41 +01:00
Thibault LE MEUR e311334ee6 [ALSA] Fixes audiophile usb analog capture with the new device_setup parameter
Modules: Documentation,USB generic driver

The patch adds the 'device_setup' module parameter and a specific
quirk to correctly initialize the audiophile usb device: this fixes
the distorted sound bug on the Analog capture port. Backward
compatibility is achieved by simply omitting the new parameter.

Signed-off-by: Thibault LE MEUR <Thibault.LeMeur@supelec.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22 10:38:38 +01:00
Clemens Ladisch 3e964432f5 [ALSA] usb-audio: add error message about missing split iso support
Modules: USB generic driver

Add an error message for -ENOSYS for situations when split iso support
is needed but not enabled.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:38:20 +01:00
Clemens Ladisch 318d27f8b4 [ALSA] usb-audio: change Casio quirk product name
Modules: USB generic driver

Use a generic name for USB device 0x07cf:0x6802 because this ID is used
by several devices without a product ID.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:36:53 +01:00
Clemens Ladisch 32e19e882c [ALSA] usb-audio: show USB error descriptions
Modules: USB generic driver

When usb_submit_urb() fails, show an error description instead of just
the error code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:36:37 +01:00
Clemens Ladisch 0243ef71ac [ALSA] usb-audio: add Casio AP-80R support
Modules: USB generic driver

Add a quirk for the Casio AP-80R.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22 10:36:29 +01:00