Commit Graph

12 Commits

Author SHA1 Message Date
Eric Biggers c4741b2305 crypto: run initcalls for generic implementations earlier
Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18 22:15:03 +08:00
Gustavo A. R. Silva 3fd8093b41 crypto: dh - fix memory leak
In case memory resources for *base* were allocated, release them
before return.

Addresses-Coverity-ID: 1471702 ("Resource leak")
Fixes: e3fe0ae129 ("crypto: dh - add public key verification test")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-20 13:51:21 +08:00
Stephan Mueller e3fe0ae129 crypto: dh - add public key verification test
According to SP800-56A section 5.6.2.1, the public key to be processed
for the DH operation shall be checked for appropriateness. The check
shall covers the full verification test in case the domain parameter Q
is provided as defined in SP800-56A section 5.6.2.3.1. If Q is not
provided, the partial check according to SP800-56A section 5.6.2.3.2 is
performed.

The full verification test requires the presence of the domain parameter
Q. Thus, the patch adds the support to handle Q. It is permissible to
not provide the Q value as part of the domain parameters. This implies
that the interface is still backwards-compatible where so far only P and
G are to be provided. However, if Q is provided, it is imported.

Without the test, the NIST ACVP testing fails. After adding this check,
the NIST ACVP testing passes. Testing without providing the Q domain
parameter has been performed to verify the interface has not changed.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:26:22 +08:00
Eric Biggers ced6a58638 crypto: dh - Remove pointless checks for NULL 'p' and 'g'
Neither 'p' nor 'g' can be NULL, as they were unpacked using
crypto_dh_decode_key().  And it makes no sense for them to be optional.
So remove the NULL checks that were copy-and-pasted into both modules.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:22 +08:00
Eric Biggers 12d41a023e crypto: dh - Fix double free of ctx->p
When setting the secret with the software Diffie-Hellman implementation,
if allocating 'g' failed (e.g. if it was longer than
MAX_EXTERN_MPI_BITS), then 'p' was freed twice: once immediately, and
once later when the crypto_kpp tfm was destroyed.

Fix it by using dh_free_ctx() (renamed to dh_clear_ctx()) in the error
paths, as that correctly sets the pointers to NULL.

KASAN report:

    MPI: mpi too large (32760 bits)
    ==================================================================
    BUG: KASAN: use-after-free in mpi_free+0x131/0x170
    Read of size 4 at addr ffff88006c7cdf90 by task reproduce_doubl/367

    CPU: 1 PID: 367 Comm: reproduce_doubl Not tainted 4.14.0-rc7-00040-g05298abde6fe #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     dump_stack+0xb3/0x10b
     ? mpi_free+0x131/0x170
     print_address_description+0x79/0x2a0
     ? mpi_free+0x131/0x170
     kasan_report+0x236/0x340
     ? akcipher_register_instance+0x90/0x90
     __asan_report_load4_noabort+0x14/0x20
     mpi_free+0x131/0x170
     ? akcipher_register_instance+0x90/0x90
     dh_exit_tfm+0x3d/0x140
     crypto_kpp_exit_tfm+0x52/0x70
     crypto_destroy_tfm+0xb3/0x250
     __keyctl_dh_compute+0x640/0xe90
     ? kasan_slab_free+0x12f/0x180
     ? dh_data_from_key+0x240/0x240
     ? key_create_or_update+0x1ee/0xb20
     ? key_instantiate_and_link+0x440/0x440
     ? lock_contended+0xee0/0xee0
     ? kfree+0xcf/0x210
     ? SyS_add_key+0x268/0x340
     keyctl_dh_compute+0xb3/0xf1
     ? __keyctl_dh_compute+0xe90/0xe90
     ? SyS_add_key+0x26d/0x340
     ? entry_SYSCALL_64_fastpath+0x5/0xbe
     ? trace_hardirqs_on_caller+0x3f4/0x560
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x43ccf9
    RSP: 002b:00007ffeeec96158 EFLAGS: 00000246 ORIG_RAX: 00000000000000fa
    RAX: ffffffffffffffda RBX: 000000000248b9b9 RCX: 000000000043ccf9
    RDX: 00007ffeeec96170 RSI: 00007ffeeec96160 RDI: 0000000000000017
    RBP: 0000000000000046 R08: 0000000000000000 R09: 0248b9b9143dc936
    R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000000
    R13: 0000000000409670 R14: 0000000000409700 R15: 0000000000000000

    Allocated by task 367:
     save_stack_trace+0x16/0x20
     kasan_kmalloc+0xeb/0x180
     kmem_cache_alloc_trace+0x114/0x300
     mpi_alloc+0x4b/0x230
     mpi_read_raw_data+0xbe/0x360
     dh_set_secret+0x1dc/0x460
     __keyctl_dh_compute+0x623/0xe90
     keyctl_dh_compute+0xb3/0xf1
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe

    Freed by task 367:
     save_stack_trace+0x16/0x20
     kasan_slab_free+0xab/0x180
     kfree+0xb5/0x210
     mpi_free+0xcb/0x170
     dh_set_secret+0x2d7/0x460
     __keyctl_dh_compute+0x623/0xe90
     keyctl_dh_compute+0xb3/0xf1
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: 802c7f1c84 ("crypto: dh - Add DH software implementation")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:16 +08:00
Tudor-Dan Ambarus 7f69105077 crypto: dh - comply with crypto_kpp_maxsize()
crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10 12:04:27 +08:00
Tudor-Dan Ambarus ee34e2644a crypto: dh - fix memleak in setkey
setkey can be called multiple times during the existence
of the transformation object. In case of multiple setkey calls,
the old key was not freed and we leaked memory.
Free the old MPI key if any.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10 12:04:26 +08:00
Tudor-Dan Ambarus c0ca1215dc crypto: kpp, (ec)dh - fix typos
While here, add missing argument description (ndigits).

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10 12:04:25 +08:00
Eric Biggers 5527dfb6dd crypto: kpp - constify buffer passed to crypto_kpp_set_secret()
Constify the buffer passed to crypto_kpp_set_secret() and
kpp_alg.set_secret, since it is never modified.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-09 18:34:27 +08:00
Mat Martineau 8edda7d22a crypto: dh - Consistenly return negative error codes
Fix the single instance where a positive EINVAL was returned.

Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-13 17:45:04 +08:00
Herbert Xu 9b45b7bba3 crypto: rsa - Generate fixed-length output
Every implementation of RSA that we have naturally generates
output with leading zeroes.  The one and only user of RSA,
pkcs1pad wants to have those leading zeroes in place, in fact
because they are currently absent it has to write those zeroes
itself.

So we shouldn't be stripping leading zeroes in the first place.
In fact this patch makes rsa-generic produce output with fixed
length so that pkcs1pad does not need to do any extra work.

This patch also changes DH to use the new interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-01 23:45:18 +08:00
Salvatore Benedetto 802c7f1c84 crypto: dh - Add DH software implementation
* Implement MPI based Diffie-Hellman under kpp API
 * Test provided uses data generad by OpenSSL

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23 18:29:56 +08:00