We used to manage features and differences on a per-cpu basis. As several
cpus share the same mci revision, this patch aggregates cpus that have the
same IP revision in one defined constant. We use the
at91mci_is_mci1rev2xx() funtion name not to mess with newer Atmel sd/mmc
IP called "MCI2". _rev2 naming could have been confusing...
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to the datasheets AT91SAM9261 does not support SDIO interrupts,
and AT91SAM9260/9263 have an erratum requiring 4bit mode while using slot
B for the interrupt to work.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is setting some max_ variables for the IO elevator, so the
elevator will put requests for large data blocks to the driver. This is
critical for
a) speed
and
b) wear leveling of the flash chip controller: Otherwise the controller
will treat the SD card badly with millions of single 4 KByte write
commands. This will lead to a shorter life time for the SD cards.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the read to use the DMA buffer as well. The old code was doing
double-buffering DMA with the PDC; no way to make it work. Replace it
with a single-PDC approach. It also simplify things removing the need for
a pre_dma_read() function.
[nicolas.ferre@atmel.com coding style modifications]
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The TX DMA buffer is allocated only once, because the
allocation/deallocation of the buffer for EACH chunk of data is
time-consuming and prone to memory fragmentation.
Using a coherent DMA buffer avoids extra data cache calls.
[nicolas.ferre@atmel.com: coding style modifications]
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix two timeout errors, one for slow SDHC cards and one for slow users
while inserting SD cards.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes two pointer errors, one which leads to memory overwrites if used
with large chunks of data.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If no platform_data was givin to the device it's going to use it's default
platform data struct which has all fields initialized to zero. As a
result the driver is going to try to request gpio0 both as write protect
and card detect pin. Which of course will fail and makes the driver
unusable
Previously to the introduction of no_wprotect and no_detect the behavior
was to assume that if no platform data was given there is no write protect
or card detect pin. This patch restores that behavior.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And bring them back to 4-bit mode during resume.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some SDIO cards may suspend while keeping function interrupts active
especially in the powered suspend case. Upon resume we need to kick the
SDIO interrupt thread to check for pending interrupts and to restart card
IRQ detection at the host controller level.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seen on a Marvell 8686 SDIO card and Via VX855 controller: we must avoid
sending CMD3/5/7 on a resume where power has been maintained, because the
8686 will refuse to respond to them and the MMC stack will give up on the
card.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested with an XO v1.5 from OLPC.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series provides the core changes needed to allow SDIO cards to
remain powered and active while the host system is suspended, and let them
wake up the host system when needed. This is used to implement
wake-on-lan with SDIO wireless cards at the moment. Patches to add that
support to the libertas driver will be posted separately.
This patch:
Some SDIO cards have the ability to keep on running autonomously when the
host system is suspended, and wake it up when needed. This however
requires that the host controller preserve power to the card, and
configure itself appropriately for wake-up.
There is however 4 layers of abstractions involved: the host controller
driver, the MMC core code, the SDIO card management code, and the actual
SDIO function driver. To make things simple and manageable, host drivers
must advertise their PM capabilities with a feature bitmask, then function
drivers can query and set those features from their suspend method. Then
each layer in the suspend call chain is expected to act upon those bits
accordingly.
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sdhci_set_adma_desc() is using byte-writes to write data in a specified
order into memory. Change to using __le16 for the two byte and __le32 for
the four byte cases and use the cpu_to_{le16,le32} to do the conversion
before writing.
This will reduce the size of the code and the number of writes as we no
longer need to chop the data up before writing.
As an example on ARM S3C64XX SoC, in little-endian configuration:
000000d4 <sdhci_set_adma_desc>:
- d8: e1a0c423 lsr ip, r3, #8
- dc: e1a0ec21 lsr lr, r1, #24
- e0: e1a04821 lsr r4, r1, #16
- e4: e1a05421 lsr r5, r1, #8
- e8: e1a06442 asr r6, r2, #8
- ec: e5c0c001 strb ip, [r0, #1]
- f0: e5c0e007 strb lr, [r0, #7]
- f4: e5c04006 strb r4, [r0, #6]
- f8: e5c05005 strb r5, [r0, #5]
- fc: e5c01004 strb r1, [r0, #4]
- 100: e5c06003 strb r6, [r0, #3]
- 104: e5c02002 strb r2, [r0, #2]
- 108: e5c03000 strb r3, [r0]
+ d4: e5801004 str r1, [r0, #4]
+ d8: e1c030b0 strh r3, [r0]
+ dc: e1c020b2 strh r2, [r0, #2]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code to write the ADMA descriptor into memory is repeated several
times throughout sdhci_adma_table_pre, and thus should be moved into a
common function. This will also be useful if the patch to make the write
more efficient is accepted.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some SDIO cards expect byte transfers not to exceed the configured block
transfer size. Add a quirk to that effect.
Patches to make use of this quirk will be sent separately.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hardcoded value doesn't really work for all cards.
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The host/Kconfig file is only included when MMC is selected.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The local sg variable is only used with BF54x code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prevents those without an Atmel chip having a line in kernel
configuration which says "Atmel SD/MMC Driver" without any option.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for 8bit MMC cards. The controller data width is configurable
depending on the wires setting in the platform data structure.
MMC 8bit is tested on OMAPL137 and MMC 4bit is tested on OMAPL138 EVM.
Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Chaithrika U S <chaithrika@ti.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch solves nasty problem original driver has.
Original goal of the ricoh_mmc was to disable this device because then,
mmc cards can be read using standard SDHCI controller, thus avoiding
writing of yet another driver.
However, the act of disablement, makes other pci functions that belong to
this controller (xD and memstick) shift up one level, thus pci core has
now wrong idea about these devices.
To fix this issue, this patch moves the driver into the pci quirk section,
thus it is executes before the pci is enumerated, and therefore solving
that issue, also same sequence of commands is performed on resume for same
reasons.
Also regardless of the above, this way is cleaner. You still need to set
CONFIG_MMC_RICOH_MMC to enable this quirk
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Philip Langdale <philipl@overt.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/compat_ioctl.c: In function 'do_ioctl_trans':
fs/compat_ioctl.c:534: warning: 'karg' may be used uninitialized in this function
fs/compat_ioctl.c:533: warning: 'kcmd' may be used uninitialized in this function
fs/compat_ioctl.c:656: warning: 'ret' may be used uninitialized in this function
Reduces text size by 44 bytes.
If someone calls one of these functions with an unexpected argument, the
code's buggy as-is.
Amerigo Wang <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function name must be followed by a space, hypen, space, and a short
description.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Build list_sort() only for configs that need it -- those that don't save
~581 bytes (i386).
Signed-off-by: Don Mullis <don.mullis@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
XFS and UBIFS can pass long lists to list_sort(); this alternative
implementation scales better, reaching ~3x performance gain when list
length exceeds the L2 cache size.
Stand-alone program timings were run on a Core 2 duo L1=32KB L2=4MB,
gcc-4.4, with flags extracted from an Ubuntu kernel build. Object size is
581 bytes compared to 455 for Mark J. Roberts' code.
Worst case for either implementation is a list length just over a power of
two, and to roughly the same degree, so here are timing results for a
range of 2^N+1 lengths. List elements were 16 bytes each including malloc
overhead; initial order was random.
time (msec)
Tatham-Roberts
| generic-Mullis-v2
loop_count length | | ratio
4000000 2 206 294 1.427
2000000 3 176 227 1.289
1000000 5 199 172 0.864
500000 9 235 178 0.757
250000 17 243 182 0.748
125000 33 261 196 0.750
62500 65 277 209 0.754
31250 129 292 219 0.75
15625 257 317 235 0.741
7812 513 340 252 0.741
3906 1025 362 267 0.737
1953 2049 388 283 0.729 ~ L1 size
976 4097 556 323 0.580
488 8193 678 361 0.532
244 16385 773 395 0.510
122 32769 844 418 0.495
61 65537 917 454 0.495
30 131073 1128 543 0.481
15 262145 2355 869 0.369 ~ L2 size
7 524289 5597 1714 0.306
3 1048577 6218 2022 0.325
Mark's code does not actually implement the usual or generic mergesort,
but rather a variant from Simon Tatham described here:
http://www.chiark.greenend.org.uk/~sgtatham/algorithms/listsort.html
Simon's algorithm performs O(log N) passes over the entire input list,
doing merges of sublists that double in size on each pass. The generic
algorithm instead merges pairs of equal length lists as early as possible,
in recursive order. For either algorithm, the elements that extend the
list beyond power-of-two length are a special case, handled as nearly as
possible as a "rounding-up" to a full POT.
Some intuition for the locality of reference implications of merge order
may be gotten by watching this animation:
http://www.sorting-algorithms.com/merge-sort
Simon's algorithm requires only O(1) extra space rather than the generic
algorithm's O(log N), but in my non-recursive implementation the actual
O(log N) data is merely a vector of ~20 pointers, which I've put on the
stack.
Long-running list_sort() calls: If the list passed in may be long, or the
client's cmp() callback function is slow, the client's cmp() may
periodically invoke cond_resched() to voluntarily yield the CPU. All
inner loops of list_sort() call back to cmp().
Stability of the sort: distinct elements that compare equal emerge from
the sort in the same order as with Mark's code, for simple test cases. A
boot-time test is provided to verify this and other correctness
requirements.
A kernel that uses drm.ko appears to run normally with this change; I have
no suitable hardware to similarly test the use by UBIFS.
[akpm@linux-foundation.org: style tweaks, fix comment, make list_sort_test __init]
Signed-off-by: Don Mullis <don.mullis@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Joe Perches <joe@perches.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patchwork queues show the acceptance/rejection state of submitted patches
for various MAINTAINER trees. Document their existence.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
by commit 955015bb0b
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To match arch/*/kernel perf_event location changes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c95d1e53ed ("cs5535: drop the
Geode-specific MFGPT/GPIO code") removed it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If MAINTAINERS section entries are misformatted, it was possible to have
an infinite loop.
Correct the defect by always moving the index to the end of section + 1
Also, exit check for exclude as soon as possible.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Picky mail systems won't accept email addresses where recipient has period
in name; ie. David S. Miller <davemloft.net> will not work.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perlcritic is a standard checker for Perl Best Practices. This patch
fixes most of the warnings in the get_maintainer script. If kernel
programmers are going to have checkpatch they should write clean scripts
as well...
Bareword file handle opened at line 176, column 1. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 176, column 1. See page 207 of PBP. (Severity: 5)
Bareword file handle opened at line 207, column 5. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 207, column 5. See page 207 of PBP. (Severity: 5)
Bareword file handle opened at line 246, column 6. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 246, column 6. See page 207 of PBP. (Severity: 5)
Bareword file handle opened at line 258, column 2. See pages 202,204 of PBP. (Severity: 5)
Two-argument "open" used at line 258, column 2. See page 207 of PBP. (Severity: 5)
Expression form of "eval" at line 983, column 17. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 985, column 17. See page 161 of PBP. (Severity: 5)
Subroutine prototypes used at line 1186, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 1206, column 1. See page 194 of PBP. (Severity: 5)
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doesn't need or accept '-' as a trailing option to read stdin. Doesn't
print usage() after bad options. Adds --usage as command line equivalent
of --help
Suggested-by: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an imperfect option to search a source file for email addresses.
New option: --file-emails or --fe
email addresses in files are freeform text and are nearly impossible to
parse. Still, might as well try to do a somewhat acceptable job of
finding them. This code should find all addresses that are in the form
addr@domain.tld
The code assumes that up to 3 alphabetic words along with dashes, commas,
and periods that preceed the email address are a name.
If 3 words are found for the name, and one of the first two words are a
single letter and period, or just a single letter then the 3 words are use
as name otherwise the last 2 words are used.
Some variants that are shown correctly:
John Smith <jksmith@domain.org>
Random J. Developer <rjd@tld.com>
Random J. Developer (rjd@tld.com)
J. Random Developer rjd@tld.com
Variants that are shown nominally correctly:
Written by First Last (funny-addr@somecompany.com)
is shown as:
First Last <funny-addr@somecompany.com>
Variants that are shown incorrectly:
Some Really Long Name <srln@foo.bar>
MontaVista Software, Inc. <source@mvista.com>
are returned as:
Long Name <srln@foo.bar>
"Software, Inc" <source@mvista.com>
--roles and --rolestats show "(in file)" for matches.
For instance:
Without -file-emails:
$ ./scripts/get_maintainer.pl -f -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
linux-kernel@vger.kernel.org (open list)
With -fe:
$ ./scripts/get_maintainer.pl -f -fe -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
Matt Mackall <mpm@selenic.com> (in file)
Ingo Molnar <mingo@redhat.com> (in file)
linux-kernel@vger.kernel.org (open list)
netdev@vger.kernel.org (open list:NETWORKING [GENERAL])
The number of email addresses in the file in not limited. Neither is the
number of returned email addresses.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/printk.c:72: warning: `saved_console_loglevel' defined but not used
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we create the initial stack based on the PAGE_SIZE. This is
unnecessary.
This creates this initial stack independent of the PAGE_SIZE.
It also bumps up the number of 4k pages allocated from 20 to 32, to
align with 64K page systems.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tasklist_lock does protect the task and its pid, it can't go away. The
problem is that find_pid_ns() itself is unsafe without rcu lock, it can
race with copy_process()->free_pid(any_pid).
Protecting copy_process()->free_pid(any_pid) with tasklist_lock would make
it possible to call find_task_by_pid_ns() under tasklist safely, but we
don't do so because we are trying to get rid of the read_lock sites of
tasklist_lock.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I've had some complaints about panic_timeout being wildly innacurate on
shared processor PowerPC partitions (a 3 minute panic_timeout taking 30
minutes).
The problem is we loop on mdelay(1) and with a 1ms in 10ms hypervisor
timeslice each of these will take 10ms (ie 10x) longer. I expect other
platforms with shared processor hypervisors will see the same issue.
This patch keeps the old behaviour if we have a panic_blink (only keyboard
LEDs right now) and does 1 second mdelays if we don't.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure compiler won't do weird things with limits. E.g. fetching them
twice may return 2 different values after writable limits are implemented.
I.e. either use rlimit helpers added in commit 3e10e716ab ("resource:
add helpers for fetching rlimits") or ACCESS_ONCE if not applicable.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fetch rlimit (both hard and soft) values only once and work on them. It
removes many accesses through sig structure and makes the code cleaner.
Mostly a preparation for writable resource limits support.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>