Commit Graph

918 Commits

Author SHA1 Message Date
Kay Sievers e169c13964 serial: fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable serial
platform drivers, to re-enable auto loading.

NOTE that Kconfig for some of these drivers doesn't allow modular builds, and
thus doesn't match the driver source's unload support.  Presumably their
unload code is buggy and/or weakly tested...

[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:40 -07:00
Marc Pignat 39d4c922b5 atmel_serial: fix uart/console concurrent access
Strange chars appear on the serial port when a printk and a printf
happens at the same time.  This is caused by the pdc sending chars while
atmel_console_write (called from printk) is executing

Concurent access of uart and console to the same port leads to corrupted
data to be transmitted, so disable tx dma (PDC) while writing to the
console.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:19 -07:00
Michael Trimarchi ba0657ff05 atmel_serial: avoid stopping pdc during transmission
I found a problem related to losing data during pdc transmission in
atmel_serial: connect ttyS1 with ttyS2 using a loopback cable, send 30
byte of packet from one to the other and waiting for 30 byte.  On the
other side just read and echo the data received.

We always call atmel_tx_dma() from the tasklet regardless of what interrupt
triggered it.

Signed-off-by: michael <trimarchi@gandalf.sssup.it>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:19 -07:00
Al Viro f0bb3cfde0 8250_pci: duplicate initializer in array ([pbn_b0_8_115200])
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30 14:20:24 -07:00
Yutaro Ebihara cae167d3d7 serial: sh-sci: Fix fifo stall on SH7760/SH7780/SH7785 SCIF.
There was an off-by-1 in the SCRFDR calculation that caused writes over
128-bytes to hang in the FIFO. Fix it up.

Signed-off-by: Yutaro Ebihara <ebiharaml@si-linux.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-11 13:58:50 +09:00
Josh Boyer e84290dc79 of_serial: fix section mismatch warnings
Fix the following section mismatches:

WARNING: drivers/built-in.o(.exit.text+0x5a): Section mismatch in reference from the function of_platform_serial_exit() to the variable .devinit.data:of_platform_serial_driver
The function __exit of_platform_serial_exit() references
a variable __devinitdata of_platform_serial_driver.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10 18:01:17 -07:00
Julia Lawall 022d917d96 drivers/serial/m32r_sio.c: correct use of ! and &
In commit e6bafba5b4 ("wmi: (!x & y)
strikes again"), a bug was fixed that involved converting !x & y to !(x
& y).  The code below shows the same pattern, and thus should perhaps be
fixed in the same way.

This is not tested and clearly changes the semantics, so it is only
something to consider.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E1,E2; @@
(
  !E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:16 -08:00
Bjorn Helgaas 51587cb54f serial: add PNP ID GVC0303 for Archtek 3334BRV ISA modem
Thomas Lehmann <thomas.lehmann@alumni.tu-berlin.de> verified that this
entry works.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:09 -08:00
Linus Torvalds 84b9a77400 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (35 commits)
  Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task.
  Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up processes.
  Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting tx dma.
  [Blackfin] serial driver: Add flow control support to bf54x
  [Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as well
  [Blackfin] serial driver: ADSP-BF52x arch/mach support
  [Blackfin] serial driver: use simpler comment headers and strip out information that is maintained in the scm's log
  [Blackfin] serial driver: rework break flood anomaly handling to be more robust/realistic about what we can actually work around
  [Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where the LSR is read-to-clear
  [Blackfin] serial driver: fix bug - should not wait for the TFI bit, just clear it when tx stop.
  [Blackfin] serial driver: Fix bug serial driver in DMA mode spams history to console on shell restart
  [Blackfin] serial driver: Fix bug Free rx dma buffer in shutdown.
  [Blackfin] serial driver: Clean up UART DMA code.
  Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very quickly
  [Blackfin] arch: kill section mismatch warnings
  [Blackfin] arch: handle the most common L1 shrinkage case (L1 does not exist for a part) so that any parts labeled for L1 instead get placed into external memory sections
  [Blackfin] arch: add bfin_clear_PPIx_STATUS() helper funcs like we have for other parts
  [Blackfin] arch: make sure we have proper description/copyright/license lines
  [Blackfin] arch: Fix CONFIG_PM support for BF561
  [Blackfin] arch: Remove DPMC char driver option
  ...
2008-02-29 08:41:13 -08:00
Sonic Zhang 0aef456451 Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3910

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29 12:08:42 +08:00
Paul Mundt 96de1a8f02 serial: Move asm-sh/sci.h to linux/serial_sci.h.
This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.

This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:52:45 +09:00
Sonic Zhang 56f5de8fe7 Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up processes.
Also make rx dma buffer work as a loop.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25 15:19:09 +08:00
Sonic Zhang 0711d85760 Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting tx dma.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25 15:16:50 +08:00
Haavard Skinnemoen 0400b697ef atmel_serial: fix interrupt handler return value
We should only return IRQ_HANDLED when we actually found something to
handle. This is important since the USART interrupt handler may be
shared with the timer interrupt on some chips.

Pointed-out-by: michael <trimarchi@gandalf.sssup.it>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:12:14 -08:00
Paul Mundt e8ea024bff serial: sh-sci: Fix up SH-5 build.
asm/hardware.h doesn't exist any more, and the definitions sh-sci.h
depended on are provided through asm/cpu/addrspace.h these days.
Kill off the bogus include.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:12 +09:00
Magnus Damm 9109a30e5a sh: add support for sh7366 processor
This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:10 +09:00
Denis Cheng 922f9cfa79 fs/char_dev.c: chrdev_open marked static and removed from fs.h
There is an outdated comment in serial_core.c also fixed.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
Haavard Skinnemoen ae16106875 atmel_serial: show tty name in /proc/interrupts
When possible, pass the tty name to request_irq() so that the user can easily
distinguish the different serial ports in /proc/interrupts.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Haavard Skinnemoen c811ab8c2d atmel_serial: use container_of instead of direct cast
As pointed out by David Brownell, we really ought to be using container_of
when converting from "struct uart_port *" to "struct atmel_uart_port *".

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Haavard Skinnemoen 6433471d33 atmel_serial: fix broken RX buffer allocation
Introduced by atmel_serial-split-the-interrupt-handler.patch.

Thanks to michael <trimarchi@gandalf.sssup.it> for spotting it.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Chip Coldwell a66706158d atmel_serial: add DMA support
This patch is based on the DMA-patch by Chip Coldwell for the AT91/AT32 serial
USARTS, with some tweaks to make it apply neatly on top of the other patches
in this series.

The RX and TX code has been moved to a tasklet and reworked a bit.  Instead of
depending on the ENDRX and TIMEOUT bits in CSR, we simply grab as much data as
we can from the DMA buffers.  I think this closes a race where the ENDRX bit
is set after we read CSR but before we read RPR, although I haven't confirmed
this.

Similarly, the two TX handlers (ENDTX and TXBUFE) have been combined into one.
 Since the current code only uses a single TX buffer, there's no point in
handling those interrupts separately.

This also fixes a DMA sync bug in the original patch.

[linux@bohmer.net: rebased onto irq-splitup patch]
[hskinnemoen@atmel.com: moved to tasklet, fixed dma bug, misc cleanups]
[hskinnemoen@atmel.com: atmel_serial dma: Misc fixes and cleanups]
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Remy Bohmer 1ecc26bd27 atmel_serial: split the interrupt handler
Split up the interrupt handler of the serial port into a interrupt top-half
and a tasklet.

The goal is to get the interrupt top-half as short as possible to minimize
latencies on interrupts.  But the old code also does some calls in the
interrupt handler that are not allowed on preempt-RT in IRQF_NODELAY context.
This handler is executed in this context because of the interrupt sharing with
the timer interrupt.  The timer interrupt on Preempt-RT runs in IRQF_NODELAY
context.

The tasklet takes care of handling control status changes, pushing incoming
characters to the tty layer, handling break and other errors.  It also handles
pushing TX data into the data register.

Reading the complete receive queue is still done in the top-half because we
never want to miss any incoming character.

[hskinnemoen@atmel.com: misc cleanups and simplifications]
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Haavard Skinnemoen dfa7f343e5 atmel_serial: fix bugs in probe() error path and remove()
When an error happens in probe(), the clocks should be disabled, but
only if the port isn't already used as a console.

In remove(), the port struct shouldn't be freed because it's defined
statically.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Haavard Skinnemoen 1c0fd82f93 atmel_serial: use existing console options only if BRG is running
If BRGR is zero, the baud rate generator isn't running, so the boot loader
can't have initialized the port.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Haavard Skinnemoen 829dd81122 atmel_serial: use cpu_relax() when busy-waiting
Replace two instances of barrier() with cpu_relax() since that's the right
thing to do when busy-waiting.  This does not actually change anything since
cpu_relax() is defined as barrier() on both ARM and AVR32.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Remy Bohmer b843aa216c atmel_serial: clean up the code
Clean up the atmel_serial driver to conform the coding rules.  It contains no
functional change.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Alan Cox a46c999424 serial_core: bring mostly into line with coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox b4c502a709 8250: enable rate reporting via termios
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox 6f803cd08f serial8250: coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox 5756ee9996 8250_pci: coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox 3b0fd36ddc 8250_hub6: codding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox 0fe1c13713 8250_hp300: coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox 8b4a483be5 8250_gsc: coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Alan Cox ce2e204f0c 8250_early: coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:25 -08:00
Linus Torvalds 3796958130 Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...
2008-02-07 09:02:26 -08:00
Jiri Slaby 1237a2ef31 Char: char/serial, remove SERIAL_TYPE_NORMAL redefines
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Maciej W. Rozycki e6ee512f5a dz.c: Resource management
This is a set of changes to implement proper resource management in the
driver, including iomem space reservation and operating on physical
addresses ioremap()ped appropriately using accessory functions rather than
unportable direct assignments.

Some adjustments to code are made to reflect the architecture of the
interface, which is a centrally controlled multiport (or, as referred to
from DEC documentation, a serial line multiplexer, going up to 8 lines
originally) rather than a bundle of separate ports.

Types are changed, where applicable, to specify the width of hardware
registers explicitly.  The interrupt handler is now managed in the
->startup() and ->shutdown() calls for consistency with other drivers and
also in preparation to handle the handover from the initial firmware-based
console gracefully.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki f5519caad5 dz.c: Use a helper to cast from "struct uart_port *"
Replace all casts from "struct uart_port *" to "struct dz_port *" with a
construct based on container_of().  This makes the conversion work
irrespective of where the former struct is located within the latter.

By popular request I have implemented it as an inline function rather than
a macro this time.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki ff11d07803 dz: clean up and improve the setup of termios settings
A set of changes to the way termios settings are propagated to the serial
port hardware.  The DZ11 only supports a selection of fixed baud settings,
so some requests may not be fulfilled.  Keep the old setting in such a case
and failing that resort to 9600bps.  Also add a missing update of the
transmit timeout.  And remove the explicit encoding of the line selected
from writes to the Line Parameters Register as it has been preencoded by
the ->set_termios() call already.  Finally, remove a duplicate macro for
the Receiver Enable bit.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki 54c0f37e9a dz: handle special conditions on reception correctly
Handle the read and ignore status masks correctly.  Handle the BREAK condition
as expected: a framing error with a null character is a BREAK, any other
framing error is a framing error indeed.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki 43d46ab1cd dz: fix locking issues
The ->start_tx(), ->stop_tx() and ->stop_rx() backends are called with the
port's lock already taken.  Remove locking from within them and wrap around
calls as necessary.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki 6d83c067eb dz: rename the serial console structure
Rename the serial console structure so that `modpost' does not complain about
a reference to an "init" section -- "_console" is magic.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki 7287d765d5 dz: update kconfig description
Reformat the Kconfig entries and update descriptions for accuracy.  Select the
driver by default for configurations of interest.  For the curious: 32BIT
means only 32-bit DECstations support the device, not that the driver is not
64-bit clean; I have not checked that either though.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki 87cff7fb0b dz: add and reorder inclusions, remove unneeded ones
Sort the header inclusions, add a few that are needed but pulled indirectly
only and remove ones that are not really used.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki 0ba137e23e dz: don't panic() when request_irq() fails
Well, panic() is a little bit undue if request_irq() fails; there is probably
no need to justify it any further.  Handle the case gracefully, by
unregistering the driver.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki dbab81281d dz: always check if it is safe to console_putchar()
Polled transmission is tricky enough with the DZ11 design.  While "loop" is
set to a high value, conceptually you are not allowed to transmit without
checking whether the device offers the right transmission line (yes, it is the
device that selects the line -- the driver has no control over it other than
disabling the transmitter offered if it is the wrong one), so the loop has to
be run at least once.

Well, the '1977 or PDP11 view of how serial lines should be handled...  Except
that the serial interface used to be quite an impressive board back then
rather than chip.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Maciej W. Rozycki d4dd1467f2 dz.h: remove useless unused module junk
Remove unused module function prototypes that would not even build if enabled.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
Paul Mackerras 5ab3e84f66 Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx 2008-02-07 20:27:36 +11:00
Grant Likely 52b804829c [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
When rebasing one of the mpc5200 psc UART patches I made a mistake and
damaged the patch.

This patch fixes the compile failure introduced in commit
25ae3a0739

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06 22:29:25 -07:00
Josh Boyer 256ae6a720 Merge branch 'virtex-for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.25 2008-02-06 21:06:45 -06:00