Commit Graph

17 Commits

Author SHA1 Message Date
Stefano Stabellini 176455e9a9 xen/arm and xen/arm64: implement HYPERVISOR_tmem_op
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-04 11:41:12 +00:00
Stefano Stabellini f0a8d59791 arm/xen: define xen_remap as ioremap_cached
Define xen_remap as ioremap_cache (MT_MEMORY and MT_DEVICE_CACHED end up
having the same AttrIndx encoding).

Remove include asm/mach/map.h, not unneeded.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-06-04 16:32:15 +00:00
Stefano Stabellini ea0af61321 xen/arm: implement HYPERVISOR_vcpu_op
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
2013-04-25 16:46:07 +00:00
Ian Campbell 85323a991d xen: arm: mandate EABI and use generic atomic operations.
Rob Herring has observed that c81611c4e9 "xen: event channel arrays are
xen_ulong_t and not unsigned long" introduced a compile failure when building
without CONFIG_AEABI:

/tmp/ccJaIZOW.s: Assembler messages:
/tmp/ccJaIZOW.s:831: Error: even register required -- `ldrexd r5,r6,[r4]'

Will Deacon pointed out that this is because OABI does not require even base
registers for 64-bit values. We can avoid this by simply using the existing
atomic64_xchg operation and the same containerof trick as used by the cmpxchg
macros. However since this code is used on memory which is shared with the
hypervisor we require proper atomic instructions and cannot use the generic
atomic64 callbacks (which are based on spinlocks), therefore add a dependency
on !GENERIC_ATOMIC64. Since we already depend on !CPU_V6 there isn't much
downside to this.

While thinking about this we also observed that OABI has different struct
alignment requirements to EABI, which is a problem for hypercall argument
structs which are shared with the hypervisor and which must be in EABI layout.
Since I don't expect people to want to run OABI kernels on Xen depend on
CONFIG_AEABI explicitly too (although it also happens to be enforced by the
!GENERIC_ATOMIC64 requirement too).

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Rob Herring <robherring2@gmail.com>
Acked-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-11 13:52:19 -04:00
Ian Campbell c81611c4e9 xen: event channel arrays are xen_ulong_t and not unsigned long
On ARM we want these to be the same size on 32- and 64-bit.

This is an ABI change on ARM. X86 does not change.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Keir (Xen.org) <keir@xen.org>
Cc: Tim Deegan <tim@xen.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xen.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-20 08:45:07 -05:00
Stefano Stabellini 3216dceb31 xen: introduce xen_remap, use it instead of ioremap
ioremap can't be used to map ring pages on ARM because it uses device
memory caching attributes (MT_DEVICE*).

Introduce a Xen specific abstraction to map ring pages, called
xen_remap, that is defined as ioremap on x86 (no behavioral changes).
On ARM it explicitly calls __arm_ioremap with the right caching
attributes: MT_MEMORY.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19 22:02:34 -05:00
Ian Campbell f832da068b xen: arm: implement remap interfaces needed for privcmd mappings.
We use XENMEM_add_to_physmap_range which is the preferred interface
for foreign mappings.

Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29 14:00:19 +00:00
Ian Campbell 3ab0b83bf6 xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19 15:18:01 -04:00
Ian Campbell ee7b5958e2 xen: arm: make p2m operations NOPs
This makes common code less ifdef-y and is consistent with PVHVM on
x86.

Also note that phys_to_machine_mapping_valid should take a pfn
argument and make it do so.

Add __set_phys_to_machine, make set_phys_to_machine a simple wrapper
(on systems with non-nop implementations the outer one can allocate
new p2m pages).

Make __set_phys_to_machine check for identity mapping or invalid only.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19 15:17:57 -04:00
Ian Campbell ef32f89298 xen: grant: use xen_pfn_t type for frame_list.
This correctly sizes it as 64 bit on ARM but leaves it as unsigned
long on x86 (therefore no intended change on x86).

The long and ulong guest handles are now unused (and a bit dangerous)
so remove them.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19 15:17:55 -04:00
Ian Campbell 37ea0fcb6a xen: sysfs: fix build warning.
Define PRI macros for xen_ulong_t and xen_pfn_t and use to fix:
drivers/xen/sys-hypervisor.c:288:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'xen_ulong_t' [-Wformat]

Ideally this would use PRIx64 on ARM but these (or equivalent) don't
seem to be available in the kernel.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19 15:17:51 -04:00
Stefano Stabellini ca98163376 xen/arm: compile netback
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-08 17:21:23 +00:00
Stefano Stabellini 0ec53ecf38 xen/arm: receive Xen events on ARM
Compile events.c on ARM.
Parse, map and enable the IRQ to get event notifications from the device
tree (node "/xen").

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14 13:37:32 +00:00
Stefano Stabellini 256f631f1f xen/arm: Introduce xen_ulong_t for unsigned long
All the original Xen headers have xen_ulong_t as unsigned long type, however
when they have been imported in Linux, xen_ulong_t has been replaced with
unsigned long. That might work for x86 and ia64 but it does not for arm.
Bring back xen_ulong_t and let each architecture define xen_ulong_t as they
see fit.

Also explicitly size pointers (__DEFINE_GUEST_HANDLE) to 64 bit.


Changes in v3:

- remove the incorrect changes to multicall_entry;
- remove the change to apic_physbase.


Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14 13:34:43 +00:00
Stefano Stabellini 36a67abce2 xen/arm: page.h definitions
ARM Xen guests always use paging in hardware, like PV on HVM guests in
the X86 world.

Changes in v3:

- improve comments.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-08 16:33:46 +00:00
Stefano Stabellini aa2466d21b xen/arm: hypercalls
Use r12 to pass the hypercall number to the hypervisor.

We need a register to pass the hypercall number because we might not
know it at compile time and HVC only takes an immediate argument.

Among the available registers r12 seems to be the best choice because it
is defined as "intra-procedure call scratch register".

Use the ISS to pass an hypervisor specific tag.


Changes in v2:
- define an HYPERCALL macro for 5 arguments hypercall wrappers, even if
at the moment is unused;
- use ldm instead of pop;
- fix up comments.


Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14 13:33:21 +00:00
Stefano Stabellini 4c071ee526 arm: initial Xen support
- Basic hypervisor.h and interface.h definitions.
- Skeleton enlighten.c, set xen_start_info to an empty struct.
- Make xen_initial_domain dependent on the SIF_PRIVILIGED_BIT.

The new code only compiles when CONFIG_XEN is set, that is going to be
added to arch/arm/Kconfig in patch #11 "xen/arm: introduce CONFIG_XEN on
ARM".

Changes in v3:

- improve comments.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14 13:53:39 +00:00