Commit Graph

378 Commits

Author SHA1 Message Date
Matt Mackall afedfd016a [PATCH] random: remove SA_SAMPLE_RANDOM from floppy driver
The floppy driver is already calling add_disk_randomness as it should, so this
was redundant.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:00 -07:00
Linus Torvalds 45c091bb2d Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h
2006-06-22 22:11:30 -07:00
Anton Blanchard 227318bbde [POWERPC] Remove stale 64bit on 32bit kernel code
Remove some stale POWER3/POWER4/970 on 32bit kernel support.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Paul Mackerras 6218a761bb powerpc: add context.vdso_base for 32-bit too
This adds a vdso_base element to the mm_context_t for 32-bit compiles
(both for ARCH=powerpc and ARCH=ppc).  This fixes the compile errors
that have been reported in arch/powerpc/kernel/signal_32.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-11 14:15:17 +10:00
David Woodhouse 66643de455 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-powerpc/unistd.h
	include/asm-sparc/unistd.h
	include/asm-sparc64/unistd.h

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-24 09:22:21 +01:00
Paul Mackerras 3c06da5ae5 Merge ../linux-2.6 2006-05-19 15:02:42 +10:00
Paul Mackerras e4de00215c powerpc/32: Define an is_kernel_addr() to fix ARCH=ppc compilation
My commit 6bfd93c32a broke the ARCH=ppc
compilation by using the is_kernel_addr() macro in asm/uaccess.h.
This fixes it by defining a suitable is_kernel_addr() for ARCH=ppc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 16:00:59 +10:00
David Woodhouse 5047f09b56 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-06 19:59:18 +01:00
Paul Mackerras f18fc729cd Merge ../linux-2.6 2006-05-05 15:45:48 +10:00
Vitaly Bordug 61f5657c50 [PATCH] ppc32 CPM_UART: Fixed break send on SCC
SCC uart sends a break sequence each time it is stopped with the
CPM_CR_STOP_TX command. That means that each time an application closes the
serial device, a break is transmitted. To fix this, graceful tx stop is
issued for SCC.

Signed-off-by: David Jander <david.jander@protonic.nl>
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-03 23:06:43 +10:00
David Woodhouse b07019f293 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-30 20:34:39 +01:00
Paul Mackerras 29f147d746 Merge branch 'merge' 2006-04-29 16:15:57 +10:00
Vitaly Bordug a73c87bfe9 [PATCH] ppc32: odd fixes and improvements in ppc_sys
This consists of offsets fix in ..._devices.c, and update of
ppc_sys_fixup_mem_resource() function to prevent subsequent fixups

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:05:16 +10:00
Eugene Surovegin 30aacebed0 [PATCH] ppc32: add 440GX erratum 440_43 workaround
This patch adds workaround for PPC 440GX erratum 440_43. According to
this erratum spurious MachineChecks (caused by L1 cache parity) can
happen during DataTLB miss processing. We disable L1 cache parity
checking for 440GX rev.C and rev.F

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:04:56 +10:00
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Andy Fleming 591f0a4287 Add 85xx CDS to arch/powerpc
This patch adds support for 85xx CDS support to arch/powerpc

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-04 16:09:18 -05:00
Eugene Surovegin bab70a4af7 [PATCH] lock PTE before updating it in 440/BookE page fault handler
Fix 44x and BookE page fault handler to correctly lock PTE before
trying to pte_update() it, otherwise this PTE might be swapped out
after pte_present() check but before pte_uptdate() call, resulting in
corrupted PTE. This can happen with enabled preemption and low memory
condition.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-29 13:44:15 +11:00
Paul Mackerras bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Benjamin Herrenschmidt e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Paul Mackerras 0a26b1364f ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 10:22:10 +11:00
KAMEZAWA Hiroyuki f68d4c996d [PATCH] unify pfn_to_page: ppc pfn_to_page
PPC can use generic funcs.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:46 -08:00
Paul Mackerras a0652fc9a2 powerpc: Unify the 32 and 64 bit idle loops
This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle
loops.  It brings over the concept of having a ppc_md.power_save
function from 32-bit to ARCH=powerpc, which lets us get rid of
native_idle().  With this we will also be able to simplify the idle
handling for pSeries and cell.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 15:03:03 +11:00
Sylvain Munaut 1f5e3b028c [PATCH] ppc32: Reorganize and complete MPC52xx initial cpu setup
ppc32: Reorganize and complete MPC52xx initial cpu setup

This patch splits up the CPU setup into a generic part and a
platform specific part. We also add a few missing init at the
same time.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:49:00 +11:00
Paul Mackerras c6622f63db powerpc: Implement accurate task and CPU time accounting
This implements accurate task and cpu time accounting for 64-bit
powerpc kernels.  Instead of accounting a whole jiffy of time to a
task on a timer interrupt because that task happened to be running at
the time, we now account time in units of timebase ticks according to
the actual time spent by the task in user mode and kernel mode.  We
also count the time spent processing hardware and software interrupts
accurately.  This is conditional on CONFIG_VIRT_CPU_ACCOUNTING.  If
that is not set, we do tick-based approximate accounting as before.

To get this accurate information, we read either the PURR (processor
utilization of resources register) on POWER5 machines, or the timebase
on other machines on

* each entry to the kernel from usermode
* each exit to usermode
* transitions between process context, hard irq context and soft irq
  context in kernel mode
* context switches.

On POWER5 systems with shared-processor logical partitioning we also
read both the PURR and the timebase at each timer interrupt and
context switch in order to determine how much time has been taken by
the hypervisor to run other partitions ("steal" time).  Unfortunately,
since we need values of the PURR on both threads at the same time to
accurately calculate the steal time, and since we can only calculate
steal time on a per-core basis, the apportioning of the steal time
between idle time (time which we ceded to the hypervisor in the idle
loop) and actual stolen time is somewhat approximate at the moment.

This is all based quite heavily on what s390 does, and it uses the
generic interfaces that were added by the s390 developers,
i.e. account_system_time(), account_user_time(), etc.

This patch doesn't add any new interfaces between the kernel and
userspace, and doesn't change the units in which time is reported to
userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(),
times(), etc.  Internally the various task and cpu times are stored in
timebase units, but they are converted to USER_HZ units (1/100th of a
second) when reported to userspace.  Some precision is therefore lost
but there should not be any accumulating error, since the internal
accumulation is at full precision.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 14:05:56 +11:00
Paul Mackerras a00428f5b1 Merge ../powerpc-merge 2006-02-24 14:05:47 +11:00
Olaf Hering 0728a2f99e [PATCH] powerpc: remove duplicate exports
A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/

WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 10:44:31 +11:00
Jon Mason 2ef9481e66 [PATCH] powerpc: trivial: modify comments to refer to new location of files
This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree.  I think this accomplises
everything wanted, though there might be a few references I missed.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:53:51 +11:00
Vitaly Bordug 75288c78c6 [PATCH] ppc32: Make platform devices being able to assign functions
Implemented by  modification of the .name field of the platform device,
when PDs with the
same names are to be used within different drivers, as
<device_name> -> <device_name>:<function>
Corresponding drivers should change the .name in struct device_driver to
reflect upper of course.

Added ppc_sys_device_disable/enable function set, making it easier to
disable all the inexistent/not utilized platform device way pdevs. By the
check of the "disabled" bit in the config field of ppc_sys_specs, disabled
platform devices will be either added/removed from the bus, or simply not
registered on it, depending on the time when disable/enable call asserted.

The default behaviour when nothing is disabled/enabled will be "all devices
are enabled", which is the same as before.

Also helper platform_notify_map function added, making assignment of
board-specific platform_info more consistent and generic.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:52:46 +11:00
Paul Mackerras 8f75015f33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 2006-02-08 09:43:08 +11:00
Grant C. Likely 909aeca664 [PATCH] powerpc: Add support for Xilinx ML403 reference design
Includes fix for Xilinx silicon errata 213

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:36:01 +11:00
Grant C. Likely 1a42e53d17 [PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the platfom bus.
This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.

Board specific configuration moved out of virtex.[ch] and into the
xparameters.h wrapper.

This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*.  The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices.  Only the bootloader (or
ppcboot) will need xparameters directly.

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:35:58 +11:00
Grant C. Likely b4367e7451 [PATCH] powerpc: Move xparameters.h into xilinx virtex device specific path
xparameters should not be needed by anything but virtex platform code.
Move it from include/asm-ppc/ to platforms/4xx/xparameters/

This is preparing for work to remove xparameters from the dependancy tree
for most c files.  xparam changes should not cause a recompile of the world.
Instead, drivers should get device info from the platform bus (populated
by the boot code)

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:35:35 +11:00
Marcelo Tosatti 0ec57e53c9 [PATCH] powerpc: generalize PPC44x_PIN_SIZE
The following patch generalizes PPC44x_PIN_SIZE by changing it to
PPC_PIN_SIZE, which can be defined by any sub-arch to automatically adjust
VMALLOC_START.

Define PPC_PIN_SIZE on 8xx, avoiding potential conflicts with the
pinned space.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:13:50 +11:00
Vitaly Bordug 0ce928e1b2 [PATCH] ppc32 8xx: Added setbitsXX/clrbitsXX macro for read-modify-write operations
This adds setbitsXX/clrbitsXX macro for read-modify-write operations
and converts the 8xx core and drivers to use them.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:13:29 +11:00
Paul Mackerras a7fdd90bc4 [PATCH] ppc: Remove powermac support from ARCH=ppc
This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 17:30:44 +11:00
Linus Torvalds 45bfe98bd7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's
gone, gone, gone).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 10:21:22 -08:00
Ingo Molnar 4dc7a0bbeb [PATCH] sched: add cacheflush() asm
Add per-arch sched_cacheflush() which is a write-back cacheflush used by
the migration-cost calibration code at bootup time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Paul Mackerras 624cee31bc powerpc: make ARCH=ppc use arch/powerpc/kernel/process.c
Commit 5388fb1025 made signal_32.c
use discard_lazy_cpu_state, which broke ARCH=ppc because that
uses the common signal_32.c but has its own process.c.  Make ARCH=ppc
use the common process.c to fix this and to reduce the amount
of duplicated code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 21:22:34 +11:00
Benjamin Herrenschmidt f2c4583a38 [PATCH] powerpc: pci_address_to_pio fix
This fixes pci_address_to_pio() to return an unsigned long (to be safe)
and fixes a bug in the implementation that caused it to return a bogus
IO port number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:05:56 +11:00
Kumar Gala a819f8ba76 [PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board support
This patch adds support for the TQ Components TQM85xx modules. Currently the
modules TQM8540/8541/8555/8560 are supported.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:53:08 +11:00
Benjamin Herrenschmidt d2dd482bc1 [PATCH] powerpc: Update OF address parsers
This updates the OF address parsers to return the IO flags
indicating the type of address obtained. It also adds a PCI
call for converting physical addresses that hit IO space into
into IO tokens, and add routines that return the translated
addresses into struct resource

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:26 +11:00
Benjamin Herrenschmidt 51d3082fe6 [PATCH] powerpc: Unify udbg (#2)
This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:54 +11:00
Benjamin Herrenschmidt d1405b8698 [PATCH] powerpc: Add OF address parsing code (#2)
Parsing addresses extracted from Open Firmware isn't a simple matter. We
have various bits of code that try to do it in various place, including
some heuristics in prom.c that pre-parse addresses at boot and fill
device-nodes "addrs", but those are dodgy at best and I want to
deprecate them. So this patch introduces a new set of routines that
should be capable of parsing most types of addresses and translating
them into CPU physical addresses. It currently works for things on PCI
busses and ISA busses and should work on "standard" busses like the root
bus or the MacIO bus that don't put funky flags in addresses. If you
have other bus types that do use funky flags, you'll have to add new bus
type translators, which is fairly easy.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:46 +11:00
Paul Mackerras c1189c9275 ppc: remove duplicate bseip.h
include/asm-ppc/bseip.h is a duplicate of arch/ppc/platforms/bseip.h
and is not referenced anywhere, so get rid of it.  Pointed out by
Marcelo Tosatti.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:38 +11:00
Kumar Gala 1cd8e50620 [PATCH] powerpc: moved ipic code to arch/powerpc
Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc
as a precursor of getting 83xx sub-arch building in arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:48:57 +11:00
Sylvain Munaut f80257a25d [PATCH] ppc32: Allows compilation of a MPC52xx kernel without PCI
Some custom cards might not need PCI, without this patch, compilation fails.

Signed-off-by: Roger Blofeld <blofeldus@yahoo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:31 -08:00
Sylvain Munaut e21b9f2e9a [PATCH] ppc32: Modify Freescale MPC52xx IRQ mapping to _not_ use irq 0
AFAIK IRQ number 0 is a perfectly valid IRQ number.  But it seems there are
numerous places where it's considered to be invalid or "no irq" value.  Since
that value is problematic, the IRQ mapping is changed to not use it.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:31 -08:00
Eugene Surovegin fa57f9c2b8 [PATCH] ppc32: remove "jumbo" member from ocp_func_emac_data
Remove the not needed anymore "jumbo" member from ocp_func_emac_data.
Jumbo frame support is handled by PPC4xx EMAC driver internally now.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:30 -08:00
Al Viro 7c3dbbe982 [PATCH] ppc: ppc4xx_dma DMA_MODE_{READ,WRITE} fix
DMA_MODE_{READ,WRITE} are declared in asm-powerpc/dma.h and their
declarations there match the definitions.  Old declarations in
ppc4xx_dma.h are not right anymore (wrong type, to start with).
Killed them, added include of asm/dma.h where needed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16 14:43:05 -08:00
Paul Mackerras 0e6850f615 Merge branch 'mymerge' of ssh://ozlabs.org/home/sfr/kernel-sfr 2005-11-19 14:25:23 +11:00
Vitaly Bordug 966cc04b4d [PATCH] ppc32: add missing define for fs_enet Ethernet driver
This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable
RMII mode.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18 07:49:45 -08:00
Stephen Rothwell 78b09735a2 powerpc: merge dma-mapping.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-19 01:48:52 +11:00
Stephen Rothwell 78baa2f8ad ppc32: move some dma routines
Every other architecture define dma_cache_{inv,wback,wback_inv}
in asm/io.h and doing so brings us closer to ppc64.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-19 01:48:33 +11:00
Kumar Gala 7486a38f68 [PATCH] powerpc: replace page_to_virt() with lowmem_page_address() for Book-E
page_to_virt and lowmem_page_address provided equiavlent functionality
so use the more standard lowmem_page_address

This also addresses build issue in ARCH=powerpc since page_to_virt()
has been removed from include/asm-powerpc/page.h

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 13:52:12 +11:00
Paul Mackerras c55377ee73 powerpc: Move a bunch of ppc64 headers to include/asm-powerpc
... and also delete some that are no longer used because we already
had an include/asm-powerpc version of the header.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 17:22:01 +11:00
Kumar Gala 4c8d3d997e [PATCH] Update email address for Kumar
Changed jobs and the Freescale address is no longer valid.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:10 -08:00
Benjamin Herrenschmidt a7f290dad3 [PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel
This patch moves the vdso's to arch/powerpc, adds support for the 32
bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds
some new (still untested) routines to both vdso's: clock_gettime() with
support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same
clocks) and get_tbfreq() for glibc to retreive the timebase frequency.

Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits
returns a long long (r3, r4) not a long. This is such that if we ever
add support for >4Ghz timebases on ppc32, the userland interface won't
have to change.

I have tested gettimeofday() using some glibc patches in both ppc32 and
ppc64 kernels using 32 bits userland (I haven't had a chance to test a
64 bits userland yet, but the implementation didn't change and was
tested earlier). I haven't tested yet the new functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:25:39 +11:00
David Gibson 26ef5c0957 [PATCH] powerpc: Merge cacheflush.h and cache.h
The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:09:22 +11:00
David Gibson 584224e409 [PATCH] powerpc: Merge current.h
This patch merges current.h.  This is a one-big-ifdef merge, but both
versions are so tiny, I think we can live with it.  While we're at it,
we get rid of the fairly pointless redirection through get_current()
in the ppc64 version.

Built and booted on POWER5 LPAR (ARCH=powerpc & ARCH=ppc64).  Built
for 32-bit pmac (ARCH=powerpc & ARCH=ppc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:23:53 +11:00
David Gibson c5ff700116 [PATCH] powerpc: Merge signal.h
Having already merged the ppc and ppc64 versions of signal.c, this
patch finishes the job by merging signal.h.  The two versions were
almost identical already.  Notable changes:
	- We use BITS_PER_LONG to correctly size sigset_t
	- Remove some uneeded #includes and struct forward
declarations.  This does mean adding an include to signal_32.c which
relied on the indirect inclusion of sigcontext.h
	- As the ppc64 version, the merged signal.h has prototypes for
do_signal() and do_signal32().  Thus remove extra prototypes from
ppc_ksyms.c which had them directly.

Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc).  Built
for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:23:46 +11:00
Kumar Gala 78b331213e [PATCH] ppc32: Update MPC834x platform to work with new phylib
MPC834x uses the gianfar network driver which now uses the new phylib.  We
need to update the platform code to create a gianfar platform MDIO bus and
pass the right intializations to the gianfar driver to make things work
again.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:52 -08:00
Stephen Rothwell b354cab076 powerpc: merge ide.h
This is very simple with it being almost all ppc32 with just a couple
of common defines.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 12:20:34 +11:00
Benjamin Herrenschmidt 7b007de8a9 [PATCH] ppc: Fix ARCH=ppc build with xmon
xmon() prototype is inconsistent between ARCH=ppc and ARCH=powerpc,
thus causing ARCH=ppc build breakage.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:48 +11:00
Benjamin Herrenschmidt 21fe3301f1 [PATCH] ppc: fix a bunch of warnings
Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings,
this fixes some of them

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:36 +11:00
Benjamin Herrenschmidt 183d020258 [PATCH] ppc64: SMU partition recovery
This patch adds the ability to the SMU driver to recover missing
calibration partitions from the SMU chip itself. It also adds some
dynamic mecanism to /proc/device-tree so that new properties are visible
to userland.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:40 +11:00
Paul Mackerras 24bfb00123 Merge ../linux-2.6 2005-11-08 11:14:20 +11:00
Matt Porter 2b0c28d7f8 [PATCH] RapidIO support: ppc32
Adds PPC32 RIO support.  Init code for the MPC85xx RIO ports and glue for the
STx GP3 board to use it.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:47 -08:00
Tim Schmielau 8c65b4a604 [PATCH] fix remaining missing includes
Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:41 -08:00
Matt Porter 3e9e7c1d0b [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot
as bootloader.  The OpenBIOS bd_info struct is not used in the kernel
anymore (only U-Boot now).

uImage (U-Boot) tested on walnut, sycamore and bubinga
zImage (OpenBIOS) tested on sycamore, bubinga and ebony

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier 90eb266584 [PATCH] ppc32: Add Yucca (440SPe eval board) platform
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier b0f7b8bc57 [PATCH] ppc32: Add 440SPe support
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root
port mode.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier 41aace4fe8 [PATCH] ppc32: Dump error status for both PLB segments on 440SP
The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a
high-throughput segment and a low-latency segment).  Fix our PLB register
definitions to cope with this, and add code to dump the status of both
segments when a machine check occurs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier fcc188e7fd [PATCH] ppc32: Allow ERPN for early serial to depend on CPU type
The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO registers
are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like most other PPC 440
chips.  To allow for this, this patch moves the definition of the ERPN used
for mapping UART0 from being hard-coded in the head_44x.S assembly code to
being defined in ibm44x.h.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Marcelo Tosatti 55b6332ec8 [PATCH] ppc32: handle access to non-present IO ports on 8xx
This adds exception table entries for I/O instructions on and
changes MachineCheckException() slightly to cover 8xx specifics (on
8xx the MCE can be generated while executing the IO access instruction
itself, which is not the case on PowerMac's, as the comment on traps.c
details).

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:37:12 +11:00
Linus Torvalds 602d4a7e2f Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-merge 2005-11-04 16:27:50 -08:00
Paul Mackerras c3df69cd85 Merge git://oak/home/sfr/kernels/iseries/work 2005-11-04 17:03:39 +11:00
Stephen Rothwell 1970282f3b powerpc: merge tlbflush.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 16:58:59 +11:00
Michael Ellerman dc3a9efb5e Merge with Paulus 2005-11-04 12:12:52 +11:00
Stephen Rothwell 9a0f78f63b powerpc: merge tlb.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 10:20:27 +11:00
Paul Mackerras d3ab57ebdc Merge git://oak/home/sfr/kernels/iseries/work 2005-11-03 17:04:08 +11:00
Stephen Rothwell 5adb83c2fa powerpc: merge ucontext.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:59:17 +11:00
Marcelo Tosatti 38dc161864 [PATCH] ppc32 8xx: Fix harmless warning in 8xx_io/commproc.c
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 16:57:07 +11:00
Stephen Rothwell 608f8b3cf3 powerpc: merge sigcontext.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:24:25 +11:00
Stephen Rothwell da80d460bf powerpc: merge ptrace.h
Move struct ptregs32 into asm-ppc64/ppc32.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:03:07 +11:00
Stephen Rothwell c5a1ebd245 powerpc: merge stat.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:02:23 +11:00
Michael Ellerman e1df870d54 powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h.

The only thing that's really changed is that we now allocate crash_notes
properly on PPC32. It's address is exported via sysfs, so it's not correct
for it to be a pointer.

I've also removed some of the "we don't use this" comments, because they're
wrong (or perhaps were referring only to arch code).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:35:45 +11:00
Al Viro bbc5b21284 [PATCH] missing platform_device.h includes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01 21:50:01 -08:00
Paul Mackerras de2d3dbd17 Merge ../linux-2.6 2005-11-02 15:20:55 +11:00
David Gibson 2ff2ae7a0d [PATCH] powerpc: Merge futex.h
This patch merges the ppc32 and ppc64 versions of futex.h, essentially
by taking the ppc64 version as the powerpc version.  The old ppc32
version did not implement the futex_atomic_op_inuser() callback (it
always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32.
In fact the ppc64 version of this function is almost suitable for
ppc32 as well - the only change needed is to extend ppc_asm.h with a
macro expanding to to the right pseudo-op to store a pointer (either
".long" or ".llong").

Built and booted on pSeries.  Built for 32-bit powermac.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 14:48:18 +11:00
David Gibson a0e60b2033 [PATCH] powerpc: Merge bitops.h
Here's a revised version.  This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch).  In fact it is used in the powermac interrupt code
(but not on pSeries).

- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
  instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S

- ppc32 previously used a full "sync" barrier at the end of
  test_and_*_bit(), whereas ppc64 used an "isync".  The merged version
  uses "isync", since I believe that's sufficient.

- The ppc64 versions of then minix_*() bitmap functions have changed
  semantics.  Previously on ppc64, these functions were big-endian
  (that is bit 0 was the LSB in the first 64-bit, big-endian word).
  On ppc32 (and x86, for that matter, they were little-endian.  As far
  as I can tell, the big-endian usage was simply wrong - I guess
  no-one ever tried to use minixfs on ppc64.

- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
  inline (they were already out-of-line on ppc64).

- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
  the merged bitops.  What it was doing in mmu_context.h in the first
  place, I have no idea.

- The fls() function is now implemented using the cntlzw instruction
  on ppc64, instead of generic_fls(), as it already was on ppc32.

- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
  arch/ppc/Makefile.  This in turn requires some changes to
  arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.

Built and running on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:49:02 +11:00
David Gibson 031ef0a72a [PATCH] powerpc: Merge ipcbuf.h
This patch merges ppc32 and ppc64 versions of ipcbuf.h.  The merge is
essentially trivial, since the structure defined in each version was
already identical.  Only wrinkle is that the merged version now
includes linux/types.h in order to get the fixed width integer types.
In fact, the old versions probably should have been including that
anyway, since the file uses various __kernel_*_t types.

Built and booted on G5, built for 32-bit pmac, but not booted, since
the merge tree currently doesn't boot there.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:26 +11:00
Stephen Rothwell 2df5e8bcca powerpc: merge uaccess.h
There is still a bug to be fixed and more merging to be done.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:03 +11:00
Linus Torvalds 4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Paul Mackerras 23fd07750a Merge ../linux-2.6 by hand 2005-10-31 13:37:12 +11:00
Arthur Othieno 727a53bd53 [PATCH] semaphore: Remove __MUTEX_INITIALIZER()
__MUTEX_INITIALIZER() has no users, and equates to the more commonly used
DECLARE_MUTEX(), thus making it pretty much redundant.  Remove it for good.

Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:27 -08:00
Christoph Hellwig dfb7dac3af [PATCH] unify sys_ptrace prototype
Make sure we always return, as all syscalls should.  Also move the common
prototype to <linux/syscalls.h>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:20 -08:00
Rik Van Riel eb92f4ef32 [PATCH] add sem_is_read/write_locked()
Add sem_is_read/write_locked functions to the read/write semaphores, along the
same lines of the *_is_locked spinlock functions.  The swap token tuning patch
uses sem_is_read_locked; sem_is_write_locked is added for completeness.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:35 -07:00
Russell King d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Vitaly Bordug 1461b4ea2b [PATCH] ppc32: ppc_sys fixes for 8xx and 82xx
This patch fixes a numbers of issues regarding to that both 8xx and 82xx
began to use ppc_sys model:
	- Platform is now identified by default deviceless SOC, if no
BOARD_CHIP_NAME is specified in the bard-specific header. For the list
of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and
mpc82xx_sys.c for 8xx and 82xx respectively.
	- Fixed a bug in identification by name - if the name was not found,
it returned -1 instead of default deviceless ppc_spec.
	- fixed devices amount in the 8xx platform system descriptions

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:49:29 +10:00
Andy Fleming b37665e0ba [PATCH] ppc32: 85xx PHY Platform Update
This patch updates the 85xx platform code to support the new PHY Layer.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <Kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:42:28 +10:00
Olaf Hering 35e95e6399 [PATCH] ppc32: nvram driver for chrp
This implements a nvram acccess method, similar to
arch/ppc64/kernel/pSeries_nvram.c tested on CHRP B50.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:35:00 +10:00
Roland Dreier 8b150478ae [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addresses
Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:25:49 +10:00
Al Viro e82dd4d647 [PATCH] gfp_t: dma-mapping (ppc)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:48 -07:00
Paul Mackerras 80579e1f4a powerpc: 32-bit CHRP SMP fixes
Untested, but "should" work...  at least this way it compiles.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 22:42:04 +10:00
David Gibson 2765ca2540 [PATCH] powerpc: Merge parport.h
Save for the header #define, ppc32 and ppc64 versions of parport.h are
identical.  This patch merges them.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:50:54 +10:00
David Gibson 25c8a78b1e [PATCH] powerpc: Fix handling of fpscr on 64-bit
The recent merge of fpu.S broken the handling of fpscr for
ARCH=powerpc and CONFIG_PPC64=y.  FP registers could be corrupted,
leading to strange random application crashes.

The confusion arises, because the thread_struct has (and requires) a
64-bit area to save the fpscr, because we use load/store double
instructions to get it in to/out of the FPU.  However, only the low
32-bits are actually used, so we want to treat it as a 32-bit quantity
when manipulating its bits to avoid extra load/stores on 32-bit.  This
patch replaces the current definition with a structure of two 32-bit
quantities (pad and val), to clarify things as much as is possible.
The 'val' field is used when manipulating bits, the structure itself
is used when obtaining the address for loading/unloading the value
from the FPU.

While we're at it, consolidate the 4 (!) almost identical versions of
cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S,
arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S,
arch/powerpc/kernel/misc_64.S) into a single version in fpu.S.  The
new version takes a pointer to thread_struct and applies the correct
offset itself, rather than a pointer to the fpscr field itself, again
to avoid confusion as to which is the correct field to use.

Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S
code, which it previously did not.

Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc
and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y).
Booted on G5 (ARCH=powerpc) and things which previously fell over no
longer do.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:48:50 +10:00
Stephen Rothwell 89edce0b4e [PATCH] powerpc: merge scatterlist.h
This depends on the 64bit dma_addr_t patch.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:52 +10:00
Kumar Gala d95bbcb3a3 [PATCH] powerpc: merge include/asm-ppc*/checksum.h into include/asm-powerpc/checksum.h
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:54:31 +10:00
David Gibson 6cb7bfebb1 [PATCH] powerpc: Merge thread_info.h
Merge ppc32 and ppc64 versions of thread_info.h.  They were pretty
similar already, the chief changes are:

	- Instead of inline asm to implement current_thread_info(),
which needs to be different for ppc32 and ppc64, we use C with an
asm("r1") register variable.  gcc turns it into the same asm as we
used to have for both platforms.
	- We replace ppc32's 'local_flags' with the ppc64
'syscall_noerror' field.  The noerror flag was in fact the only thing
in the local_flags field anyway, so the ppc64 approach is simpler, and
means we only need a load-immediate/store instead of load/mask/store
when clearing the flag.
	- In readiness for 64k pages, when THREAD_SIZE will be less
than a page, ppc64 used kmalloc() rather than get_free_pages() to
allocate the kernel stack.  With this patch we do the same for ppc32,
since there's no strong reason not to.
	- For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE
via asm-offsets, thread_info.h can now be safely included in asm, as
on ppc32.

Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and
Power5 (ARCH=ppc64 and ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21 22:47:23 +10:00
Paul Mackerras 17a6392d30 powerpc/ppc/ppc64: Various compile fixes.
This declares powersave_nap in system.h and makes it an int everywhere,
fixes typos for the maple platform, fixes a couple of places where
I missed removing the last two arguments from a message_pass function,
and makes ppc64 consistent with ppc32 in the type of the
pci_bridge.cfg_data field.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 21:10:09 +10:00
Paul Mackerras 399fe2bdd3 ppc: rename pci_assign_all_busses to pci_assign_all_buses
... for consistency with ppc64 and to make merging easier.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 20:57:05 +10:00
Paul Mackerras ff065ddd96 powerpc: Merge various powermac-related header files.
Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all
of these moved from asm-ppc to asm-powerpc.  In each case the
asm-ppc64 version (if there was one) was just a single line
including the asm-ppc version.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 20:53:39 +10:00
Becky Bruce 971dc77b64 [PATCH] powerpc: Merge types.h
This patch merges types.h into include/asm-powerpc. The only real change is
the removal of the include of linux/config.h from the 32-bit version - it
doesn't appear to be necessary.

This patch has been built on several different 32 and 64-bit platforms,
and booted on mpc8540_ads.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:50 +10:00
David Gibson f7f6f4fea6 [PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]
This patches the ppc32 and ppc64 versions of the headers and .c files
with helper functions for manipulating the performance counting
hardware.  As a side effect, it removes use of the term "perfmon" from
ppc32, thus avoiding confusion with the unrelated performance counter
interface from HP Labs also called "perfmon".

Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac
with both ARCH=powerpc and ARCH=ppc{,64} as appropriate.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:24 +10:00
Paul Mackerras 0b879a3144 ppc: declare smp_ops in asm/smp.h, since platform setup code needs it
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 23:12:01 +10:00
Paul Mackerras 7ac59c6249 ppc: Fix various compile errors resulting from ptrace.c merge
This introduces flush_{fp,altivec,spe}_to_thread and fixes a
branch-too-far error in linking.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:12:39 +10:00
Stephen Rothwell 7dffb72028 ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
Benjamin Herrenschmidt d8e998c58a [PATCH] ppc32: Tell userland about lack of standard TB
Glibc is about to get some new high precision timer stuff that relies on
the standard timebase of the PPC architecture.

However, some (rare & old) CPUs do not have such timebase and it is a
bit annoying to have your stuff just crash because you are running on
the wrong CPU...

This exposes to userland a CPU feature bit that tells that the current
processor doesn't have a standard timebase.  It's negative logic so that
glibc will still "just work" on older kernels (it will just be unhappy
on those old CPUs but that doesn't really matter as distro tend to
update glibc & kernel at the same time).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12 08:24:47 -07:00
Paul Mackerras b6ec995a21 Merge from Linus' tree 2005-10-12 14:43:32 +10:00
Paul Mackerras fd582ec88e ppc: Various minor compile fixes
This fixes up a variety of minor problems in compiling with ARCH=ppc
arising from using the merged versions of various header files.
A lot of the changes are just adding #include <asm/machdep.h> to
files that use ppc_md or smp_ops_t.

This also arranges for us to use semaphore.c, vecemu.c, vector.S and
fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:08:12 +10:00
Paul Mackerras 60a3d74178 powerpc: Merged asm/xmon.h
Xmon itself isn't merged yet, though.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 10:00:00 +10:00
Paul Mackerras 3b341c1c41 powerpc: Merged asm/i8259.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 09:59:44 +10:00
Paul Mackerras 508c40227c powerpc: Merged asm/backlight.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 09:59:38 +10:00
Paul Mackerras e574d238ab powerpc: Fix compilation for 32-bit configs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:58:10 +10:00
Paul Mackerras eef289f79c powerpc: Merge asm/unistd.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:56:11 +10:00
Paul Mackerras 1b92313d5b powerpc: Merge asm/irq.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:54:57 +10:00
Paul Mackerras 9f04b9e327 powerpc: Merged processor.h.
This adds register definitions from the ppc64 processor.h to reg.h,
and makes a single merged processor.h.  I moved __is_processor from
the ppc64 system.h to the merged reg.h along with the PVR register
constants.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:19:43 +10:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Paul Mackerras 2e686bc3bf powerpc: Merge of_device.c and of_device.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 13:22:17 +10:00
Paul Mackerras 7c8c6b9776 powerpc: Merge lmb.c and make MM initialization use it.
This also creates merged versions of do_init_bootmem, paging_init
and mem_init and moves them to arch/powerpc/mm/mem.c.  It gets rid
of the mem_pieces stuff.

I made memory_limit a parameter to lmb_enforce_memory_limit rather
than a global referenced by that function.  This will require some
small changes to ppc64 if we want to continue building ARCH=ppc64
using the merged lmb.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 12:23:33 +10:00
Stephen Rothwell dc1c1ca3dc powerpc: merge idle_power4.S and trapc.s
Use idle_power4.S from ppc64 as we are not going to support
32 bit power4 in the merged tree.

Merge ppc64 traps.c into powerpc traps.c:
	use ppc64 versions of exception routine names
		(as they don't have StudlyCaps)
	make all the versions if die() have the same
		prototype

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:43:42 +10:00
Al Viro a3ca066efb [PATCH] missing qualifiers in readb() et.al. on ppc
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 08:42:24 -07:00
Al Viro a7625d6e49 [PATCH] mv64x60 iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Kumar Gala 10b35d9978 [PATCH] powerpc: merged asm/cputable.h
Merged cputable.h between ppc32 and ppc64.  In doing this removed support
for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they
dont compile correctly.  C code should use cpu_has_feature().  This is
based on Arnd Bergmann's initial patch.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 15:42:53 +10:00
Becky Bruce a559c91d77 [PATCH] powerpc: merge byteorder.h
powerpc: Merge byteorder.h

Essentially adopts the 64-bit version of this file.  The 32-bit version had
been using unsigned ints for arguments/return values that were actually
only 16 bits - the new file uses __u16 for these items as in the 64-bit
version of the header.  The order of some of the asm constraints
in the 64-bit version was slightly different than the 32-bit version,
but they produce identical code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 15:42:53 +10:00
Stephen Rothwell bbeb3f4c55 powerpc: clean up after powermac build merge
Complete moving arch/ppc64/kernel/mpic.h,
        include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h
	        and include/asm-ppc64/kprobes.h
Add arch/powerpc/platforms/Makefile and use it from
	arch/powerpc/Makefile
Introduce OLDARCH temporarily so we can point back to
	the originating architecture

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-27 13:51:59 +10:00
Paul Mackerras 14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
Paul Mackerras e5baa396af Merge from Linus' tree. 2005-09-25 22:51:50 +10:00
Becky Bruce d6a4c847e4 [PATCH] powerpc: merge semaphore.h
powerpc: Merge semaphore.h

Adopted the ppc64 version of semaphore.h.  The 32-bit version used
smp_wmb(), but recent updates to atomic.h mean this is no longer required.
The 64-bit version made use of unlikely(), which has been retained in the
combined version.

This patch requires the recent atomic.h patch.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 22:38:46 +10:00
Jon Loeliger 342e73b3d6 [PATCH] powerpc: Merge asm-ppc*/rwsem.h
Merge asm-ppc*/rwsem.h into include/asm-powerpc.
Removed smp_*mb() memory barriers from the ppc32 code
as they are now burried in the atomic_*() functions as
suggested by Paul, implemented by Arnd, and pushed out
by Becky.  I am not the droid you are looking for.

This patch depends on Becky's atomic.h merge patch.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 22:38:46 +10:00
Becky Bruce feaf7cf153 [PATCH] powerpc: merge atomic.h, memory.h
powerpc: Merge atomic.h and memory.h into powerpc

Merged atomic.h into include/powerpc.  Moved asm-style HMT_ defines from
memory.h into ppc_asm.h, where there were already HMT_defines; moved c-style
HMT_ defines to processor.h. Renamed memory.h to synch.h to better reflect
its contents.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Jon Loeliger <linuxppc@jdl.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 22:38:46 +10:00
Jon Loeliger 2bfadee32f [PATCH] powerpc: Merge asm-ppc*/seccomp.h, drop TIF_32BIT check
Merge asm-ppc*/seccomp.h. Drop TIF_32BIT check.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 22:38:45 +10:00
Kumar Gala 3efc333e7f [PATCH] powerpc: Fix building of power3 config on ppc32
The spinlock_types.h merge renamed the structure for raw_spinlock_t to
match ppc64.  In doing so some of the spinlock macros/functions needed to
be updated to match.  Apparently, this seems to only be caught when
building power3.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 22:38:45 +10:00
Benjamin Herrenschmidt 0365ba7fb1 [PATCH] ppc64: SMU driver update & i2c support
The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5.  It drives things like fans, i2c busses, real time
clock, etc...

The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously.  This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors.  This driver is a basic block
for upcoming work on thermal control for those machines, among others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:35 -07:00
Kumar Gala b671ad2bef [PATCH] powerpc: merged hw_irq.h
Merged hw_irq.h between ppc32 & ppc64.  Added support to use the Book-E
wrtee[i] instructions that allow modifying MSR[EE] atomically.
Additionally, added get_irq_desc() macros to ppc32 to allow mask_irq(),
unmask_irq(), and ack_irq() to be common between ppc32 & ppc64.

Note: because 64-bit Book-E implementations only have a 32-bit MSR the
macro's for Book-E need to come before the PPC64 macro's to ensure the
right thing happends for 64-bit Book-E processors.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-22 21:03:34 +10:00
Jon Loeliger b8f114db84 [PATCH] powerpc: Merge asm-ppc*/dma.h
This merges the asm-ppc*/dma.h files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-22 21:03:33 +10:00
Paolo 'Blaisorblade' Giarrusso 676067cfea [PATCH] Remove unused var from asm/futex.h
As recently done by Russell King for ARM, commit
4732efbeb9 introduces a generic asm/futex.h copied
along most arches, which includes a "-ENOSYS support" to be changed if needed.
However, it includes an unused var (taken from the "real" version) which GCC
warns about.

Remove it from all arches having that file version (i.e. same GIT id).
$ git-diff-tree -r HEAD
and
$ git-ls-tree  -r HEAD include/|grep 9feff4ce14

may be more interesting than looking at the patch itself, to make sure I've
just copied the arm header to all other archs having the original dummy version
of this file.

Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 16:16:29 -07:00
Kumar Gala e903c5b536 [PATCH] powerpc: merge include/asm-ppc*/statfs.h into include/asm-powerpc/statfs.h
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:10 +10:00
Kumar Gala 8a4a10ae99 [PATCH] powerpc: merge include/asm-ppc*/spinlock_types.h into include/asm-powerpc/spinlock_types.h
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:09 +10:00
Kumar Gala 3f58542f47 [PATCH] powerpc: merge include/asm-ppc*/auxvec.h into include/asm-powerpc/auxvec.h
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:09 +10:00