Commit Graph

218 Commits

Author SHA1 Message Date
James Bottomley c2ab64d098 [PARISC] Add IRQ affinities
This really only adds them for the machines I can check SMP on, which
is CPU interrupts and IOSAPIC (so not any of the GSC based machines).

With this patch, irqbalanced can be used to maintain irq balancing.
Unfortunately, irqbalanced is a bit x86 centric, so it doesn't do an
incredibly good job, but it does work.

Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-17 16:28:37 -05:00
Kyle McMartin 210cc679fa Auto-update from upstream 2005-10-28 12:18:07 -04:00
Al Viro 5c1fb41f40 [PATCH] gfp_t: dma-mapping (parisc)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:48 -07:00
Randolph Chung abff75439f [PARISC] Avoid use of floating point in the kernel
don't use *printf %f in the kernel, mm'kay?

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:57:13 -04:00
Kyle McMartin 7efe1611b2 [PARISC] Initialize serial spinlocks in superio.c
git commit 976ecd12b8 changed our locking
characteristics, and put the onus of spin_lock_init on superio.c.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:48:03 -04:00
Grant Grundler 3aa0862ce7 [PARISC] Minor iosapic.c cleanup
minor cleanup: qualify constant with "UL"

Acked-by: "Hmamouche, Youssef" <youssef@ece.utexas.edu>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:47:04 -04:00
Grant Grundler 3499495205 [PARISC] Use work queue in LED/LCD driver instead of tasklet.
2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet.

Main advantage is it allows use of msleep() in the led_LCD_driver to
"atomically" perform two MMIO writes (CMD, then DATA).
Lead to nice cleanup of the main led_work_func() and led_LCD_driver().
Kudos to David for being persistent.

From: David Pye <dmp@davidmpye.dyndns.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:46:18 -04:00
Matthew Wilcox 92b919fe46 [PARISC] Update dino from parisc tree
Fix card-mode Dino crashes on 725 (and probably other Snake) systems.
Dino was coming up in fatal mode after a warm reboot.  Resetting Dino
brings it out of fatal mode, so do that if the status register indicates
we're in fatal mode.  Since this was never observed on any later systems,
I presume firmware does this for us on those.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Add debug statements in the cfg_read and cfg_write functions
Fix debug statements from the IRQ overhaul last winter
Rename dino_driver_callback() to dino_probe()

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:38:23 -04:00
Grant Grundler 86a61ee9c9 [PARISC] Update ccio-dma from parisc tree
revert use of %%sr0 in fdc asm.

Thanks to Joel Soete for pointing out this oversight.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.14-rc2-pa3 fdc/lci should be %r0 instead 0 for index (PA 1.1 compliance)
From: Joel Soete <soete.joel@tiscali.be>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Explain why we need insert_resource() instead of request_resource().

Fundementally, this is more convoluted for ccio driver because of
o legacy (HP-PB) transperant bridges.
o support for MMIO behind card-mode Dino (PCI)
o support for above bridges without ccio in the box

SBA driver doesn't have to worry about those issues.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Use insert_resource instead of request_resource now that the subdevices
will already have their resources claimed

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

re-enable use of "inline" for perf critical functions.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.12-rc4-pa5 fix sign extension of MMIO range

Fixes the problem of claiming a range that is disabled on 64-bit kernel:
ccio_init_resource() claimed CCIO bus address space (ffffffff00000000,
ffffffffffffffff)
also removes use of __FILE__.
Tested on both 32 and 64-bit systems by Joel.

From: Joel Soete <soete.joel@tiscali.be>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.12-rc1-pa7 incorrect BUG_ON in ccio

ccio-dma.c line 1317 was preventing K-class with 4GB RAM from booting.
Any ccio machine with >=2GB of RAM would have (incorrectly) triggered this.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Convert to ioremap and __raw_read/write

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:37:43 -04:00
Grant Grundler 64908ad95c [PARISC] Update sba_iommu from parisc tree
revert use of %%sr0 in fdc asm.
Thanks to Joel Soete for pointing out this oversight.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.14-rc2-pa3 move "sync" outside the main loop that fills IO Pdir.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

remove explicit use of sr0 in fdc ops.
Thanks to Joel Soete for reminding me were I added those...

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.14-rc2-pa2 - make SBA more anal about invalidating pdir entries

Previous code cleared the valid flag a pdir entry but it did NOT
guarantee this change was visible to the PDIR before writing
the PCOM register. Ie the SBA could pick up a stale entry if
the write happened to hit the SBA before the cacheline was flushed
from the cache.

Long term, I think I want to make this a compile time flag.
Developement tree should enable anal pdir checking by default
and Debian can disable it with either a CONFIG option
or one-line patch. fdc/sync options can only negatively affect
performance though I haven't measure how much yet.
If someone can run netperf TCP_RR across gige and compare
-pa1 and -pa2, that would be sufficient.

Cleaned up the use of "fdc" to make sure it's using "kernel"
space id (specify sr0 but maps to sr4-7). It seems a bit fragile
to assume "sr1" gets loaded with KERNEL_SPACE which is how the
code works today.

Tested on 32 and 64-bit SMP kernels on j6k.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

remove PDC_NARROW from SBA and document history of PDC_NARROW a bit.
It will still show up in an older kernel's .config file.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

if/ifdef cleanups from Joel Soete.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.12-rc4-pa2  fix 32-bit support for Astro platforms
o Since my last SBA code change, SBA could allocate more than 1GB of IOVA
  space on Astro boxes with more than 1GB of RAM when running 32-bit kernel.
  This is bad since IOMMU can only talk to the first 1GB at most.
  Kudos to jejb for quickly spotting that bug.

o jejb also noted SBA should *always* reject DMA masks > 32-bits since
  DMA-mapping.txt indicates caller should try again with 32-bits.

o off-by-one error when comparing the mask to IOVA space size.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:37:20 -04:00
Matthew Wilcox 53f01bba49 [PARISC] Convert parisc_device to use struct resource for hpa
Convert pa_dev->hpa from an unsigned long to a struct resource.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Fix up users of ->hpa to use ->hpa.start instead.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:36:40 -04:00
Matthew Wilcox bdad1f836a [PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver
names.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:36:23 -04:00
Matthew Wilcox 5658374766 [PARISC] Convert parisc_device tree to use struct device klists
Fix parse_tree_node.  much more needs to be done to fix this file.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Make drivers.c compile based on a patch from Pat Mochel.

From: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Fix drivers.c to create new device tree nodes when no match is found.

Signed-off-by: Richard Hirst <rhirst@parisc-linux.org>

Do a proper depth-first search returning parents before children, using the
new klist infrastructure.

Signed-off-by: Richard Hirst <rhirst@parisc-linux.org>

Fixed parisc_device traversal so that pdc_stable works again
Fixed check_dev so it doesn't dereference a parisc_device until it
has verified the bus type

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Convert pa_dev->hpa from an unsigned long to a struct resource.
Use insert_resource() instead of request_mem_region().
Request resources at bus walk time instead of driver probe time.
Don't release the resources as we don't have any hotplug parisc_device
support yet.
Add parisc_pathname() to conveniently get the textual representation
of the hwpath used in sysfs.
Inline the remnants of claim_device() into its caller.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

I noticed that some of the STI regions weren't showing up in iomem.
Reading the STI spec indicated that all STI devices occupy at least 32MB.
So check for STI HPAs and give them 32MB instead of 4kB.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:33:38 -04:00
Herbert Xu e5ed639913 [IPV4]: Replace __in_dev_get with __in_dev_get_rcu/rtnl
The following patch renames __in_dev_get() to __in_dev_get_rtnl() and
introduces __in_dev_get_rcu() to cover the second case.

1) RCU with refcnt should use in_dev_get().
2) RCU without refcnt should use __in_dev_get_rcu().
3) All others must hold RTNL and use __in_dev_get_rtnl().

There is one exception in net/ipv4/route.c which is in fact a pre-existing
race condition.  I've marked it as such so that we remember to fix it.

This patch is based on suggestions and prior work by Suzanne Wood and
Paul McKenney.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 14:35:55 -07:00
Adrian Bunk 338cec3253 [PATCH] merge some from Rusty's trivial patches
This patch contains the most trivial from Rusty's trivial patches:
- spelling fixes
- remove duplicate includes

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:30 -07:00
Ingo Molnar a9f6a0dd54 [PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversions
This converts the final 20 DEFINE_SPINLOCK holdouts.  (another 580 places
are already using DEFINE_SPINLOCK).  Build tested on x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Rajesh Shah c431ada45d [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
devices attached to it that have not been configured by firmware.  In this
case, we need to configure the devices before starting them.  This patch
separates device start from device scan so that we can introduce the
configuration step in the middle.

I kept the existing semantics for pci_scan_bus() since there are a huge number
of callers to that function.

Also, I have no way of testing the changes I made to the parisc files, so this
needs review by those folks.  Sorry for the massive cross-post, this touches
files in many different places.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00