Commit Graph

41 Commits

Author SHA1 Message Date
Paul Mundt 49f3bfe933 sh: Setup boot CPU VBR early to enable early page faults.
vmemmap and the vmsplit code amongst others need to be able to take page
faults much earlier than trap_init() time, so move this in to the early
CPU initialization. VBR setup for secondary CPUs is already handled
through start_secondary(), so we only need to do this for the boot CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 12:33:22 +09:00
Paul Mundt 644755e786 Merge branches 'sh/xstate', 'sh/hw-breakpoints' and 'sh/stable-updates' 2010-01-13 13:02:55 +09:00
Paul Mundt a99eae5417 sh: Split out the unaligned counters and user bits.
This splits out the unaligned access counters and userspace bits in to
their own generic interface, which will allow them to be wired up on sh64
too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-12 16:12:25 +09:00
Paul Mundt 191d0d24b6 sh: Tidy up the sh bios VBR handling.
This moves the VBR handling out of the main trap handling code and in to
the sh-bios helper code. A couple of accessors are added in order to
permit other kernel code to get at the VBR value for state save/restore
paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-12 14:50:43 +09:00
Paul Mundt c4761815ab sh: Fix up breakpoint trap handler patching on SH-2A.
SH-2A was referencing the old handler that no longer exists, fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-05 12:44:02 +09:00
Paul Mundt 1232d88a47 sh: Make the unaligned trap handler always obey notification levels.
Presently there are a couple of paths in to the alignment handler, where
only the address error path presently quiets the notificiation messages
based on the configuration settings. We carry over the notification level
tests to the default alignment handler itself incase so that they behave
uniformly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-14 11:46:09 +09:00
Alexey Dobriyan 9a1607071c sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:50 +09:00
Paul Mundt 15dfdddbf0 sh: Disable SCIF2 on the SH-X3 proto CPU.
SCIF2 and the FPU exceptions happen to share vector numbers, one in
EXPEVT and the other in INTEVT. This is a violation of the interface and
should have never made it in to silicon. On top of that, the demux hack
that was added for special dispatch is rather error prone, and introduces
more problems than it solves. Kill all of it off, and just refuse to deal
with SCIF2 outright.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-18 15:13:28 +09:00
Paul Mundt af67c3a9e6 sh: update die() output.
This follows the ARM change, as SH had all of the same issues:

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 10:57:52 +09:00
Paul Mundt 8406638ab0 sh: Disable unaligned kernel access printks by default.
Certain networking and USB workloads generate floods of these accesses,
so just disable it by default (thereby restoring the old behaviour). The
option remains configurable from userspace, and can still be used as a
debugging aid.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30 14:02:42 +09:00
Paul Mundt 40258ee97d sh: Fix up uninitialized variable use caught by gcc 4.4.
In the unaligned kernel exception fixup case the printk() was ordered
before the copy_from_user(), resulting in a nonsensical instruction
value. This fixes up the ordering properly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-24 17:48:15 +09:00
Paul Mundt 23c4c82171 sh: Handle unaligned 16-bit instructions on SH-2A.
This adds some sanity checking in the unaligned instruction handler to
verify the instruction size, which enables basic support for 16-bit
fixups on SH-2A parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-24 17:38:18 +09:00
Paul Mundt 480c646c32 sh: Kill off unused se_skipped in alignment trap notification code.
Nothing is using this, resulting in a build error with certain
configurations. Just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-16 15:06:39 +09:00
Matt Fleming 4aa5ac4ef4 sh: Only shout about fixing up unexpected unaligned accesses
Some unaligned accesses are completely expected. For example, the
trapped_io code uses the unaligned access fixup code path so there's no
need to warn about having to fixup the unaligned access.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-29 20:31:44 +09:00
Andre Draszik 5a0ab35e43 sh: cleanup of do_address_error()
This patch fixes a few problems with the existing code in do_address_error().

a) the variable used to printk()d the offending instruction wasn't
   initialized correctly. This is a fix to bug 5727

b) behaviour for CONFIG_CPU_SH2A wasn't correct

c) the 'ignore address error' behaviour didn't update the PC, causing an
   infinite loop.

Signed-off-by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 15:01:10 +09:00
Andre Draszik 7436cde6b2 sh: Allow user control over misaligned fixup handling
This patch brings the SH4 misaligned trap handler in line with what
happens on ARM:
Add a /proc/cpu/alignment which can be read from to get alignment
trap statistics and written to to influence the behaviour of the
alignment trap handling. The value to write is a bitfield, which
has the following meaning: 1 warn, 2 fixup, 4 signal
In addition, we add a /proc/cpu/kernel_alignment, to enable or
disable warnings in case of kernel code causing alignment errors.

Signed-off by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 14:53:46 +09:00
Andre Draszik 9a4af027a0 sh: ratelimit unaligned fixups
This patch makes sure we see messages about unaligned access fixups
every now and then. Else especially userspace apps suffering from
bad programming won't ever be noticed...

Signed-off by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 14:38:27 +09:00
Matt Fleming b344e24a8e sh: unwinder: Introduce UNWINDER_BUG() and UNWINDER_BUG_ON()
We can't assume that if we execute the unwinder code and the unwinder
was already running that it has faulted. Clearly two kernel threads can
invoke the unwinder at the same time and may be running simultaneously.

The previous approach used BUG() and BUG_ON() in the unwinder code to
detect whether the unwinder was incapable of unwinding the stack, and
that the next available unwinder should be used instead. A better
approach is to explicitly invoke a trap handler to switch unwinders when
the current unwinder cannot continue.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:02:44 +01:00
Matt Fleming 4e14dfc722 sh: Use the generalized stacktrace ops
Copy the stacktrace ops code from x86 and provide a central function for
use by functions that need to dump a callstack.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13 11:50:08 +09:00
Paul Mundt 2bcfffa423 sh: Rename opcode_t to insn_size_t.
This is now clashing with a driver, so just rename it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09 16:02:08 +09:00
Peter Griffin cd89436e54 sh: Add UBC trap vector for SH2A
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09 00:11:33 +09:00
Michael Trimarchi 01ab10393c sh: Fix up DSP context save/restore.
There were a number of issues with the DSP context save/restore code,
mostly left-over relics from when it was introduced on SH3-DSP with
little follow-up testing, resulting in things like task_pt_dspregs()
referencing incorrect state on the stack.

This follows the MIPS convention of tracking the DSP state in the
thread_struct and handling the state save/restore in switch_to() and
finish_arch_switch() respectively. The regset interface is also updated,
which allows us to finally be rid of task_pt_dspregs() and the special
cased task_pt_regs().

Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-04 11:48:11 -04:00
SUGIOKA Toshinobu 2afb447f33 sh: fix unaligned and nonexistent address handling
unaligned and nonexistent address causes wrong exception
handling in traps_32.c(handle_unaligned_access).

'handle_unalinged_ins' should return -EFAULT if address error
is fixed up with kernel exception table, otherwise
'handle_unaligned_access' increases already fixed program counter
and then crash.

for example
   ioctl(fd, TCGETA, (struct termio *)-1)
never return and stay in TASK_UNINTERRUPTIBLE state forever
in my kernel.

Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 18:35:55 +09:00
Russell King ba84be2338 remove linux/hardirq.h from asm-generic/local.h
While looking at reducing the amount of architecture namespace pollution
in the generic kernel, I found that asm/irq.h is included in the vast
majority of compilations on ARM (around 650 files.)

Since asm/irq.h includes a sub-architecture include file on ARM, this
causes a negative impact on the ccache's ability to re-use the build
results from other sub-architectures, so we have a desire to reduce the
dependencies on asm/irq.h.

It turns out that a major cause of this is the needless include of
linux/hardirq.h into asm-generic/local.h.  The patch below removes this
include, resulting in some 250 to 300 files (around half) of the kernel
then omitting asm/irq.h.

My test builds still succeed, provided two ARM files are fixed
(arch/arm/kernel/traps.c and arch/arm/mm/fault.c) - so there may be
negative impacts for this on other architectures.

Note that x86 does not include asm/irq.h nor linux/hardirq.h in its
asm/local.h, so this patch can be viewed as bringing the generic version
into line with the x86 version.

[kosaki.motohiro@jp.fujitsu.com: add #include <linux/irqflags.h> to acpi/processor_idle.c]
[adobriyan@gmail.com: fix sparc64]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
Paul Mundt ab6e570ba3 sh: Generic kgdb stub support.
This migrates from the old bitrotted kgdb stub implementation and moves
to the generic stub. In the process support for SH-2/SH-2A is also added,
which the old stub never provided.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt 75fd24c107 sh: Tidy up backtrace formatting with kallsyms disabled.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:49 +09:00
Paul Mundt edfd6da040 sh: Add a few more branch types to the branch emulator.
This plugs in some extra encodings for matching more bsr/bsrf/jsr
branches.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:49 +09:00
Paul Mundt c9306f0efb sh: Wire up oops reporting in the die notifier chain.
Commit 3f5a54e371 ("ftrace: dump out ftrace
buffers to console on panic") added an ftrace buffer dumper that hooks
in to the die notifier chain and dumps out data in the oops path.

Unfortunately SH supported ftrace but didn't support DIE_OOPS, so add
that in and get it building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 18:33:36 +09:00
Paul Mundt 4c59e2942e sh: Move lookup_exception_vector() out to asm/system_32.h.
There are other places where we want to have access to the trap/exception
number, so move out the lookup_exception_vector() helper. While we're at
it, refactor it slightly to return the vector instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 12:00:23 +09:00
Paul Mundt b3d765f5df sh: Fix up fpu emu build.
The addition of the kprobes code pushed down a variable declaration,
clean it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:12:11 +09:00
Chris Smith d39f545014 sh: Add kprobes support.
Initial support for kprobes/kretprobes for 32-bit SH platforms.

[ General cleanup and some rework for the kretprobe hash lock. -- PFM ]

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:05 +09:00
Paul Mundt fa43972fab sh: fixup many sparse errors.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Yoshinori Sato 6e80f5e8c4 sh2(A) exception handler update
This patch is

By sh2
- Remove duplicate code
- Reduce stack usage
- Cleanup and little optimize

By sh2a
- Add missing handler(256 to 511)
- Use sh2a instructions handler

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Andrew Morton fad0f90134 sh: arch/sh/kernel/traps_32.c needs asm/fpu.h
arch/sh/kernel/traps_32.c: In function `do_reserved_inst':
arch/sh/kernel/traps_32.c:667: error: implicit declaration of function `do_fpu_inst'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-16 02:03:51 +09:00
Magnus Damm e7cc9a7340 sh: trapped io support V2
The idea is that we want to get rid of the in/out/readb/writeb callbacks from
the machvec and replace that with simple inline read and write operations to
memory. Fast and simple for most hardware devices (think pci).

Some devices require special treatment though - like 16-bit only CF devices -
so we need to have some method to hook in callbacks.

This patch makes it possible to add a per-device trap generating filter. This
way we can get maximum performance of sane hardware - which doesn't need this
filter - and crappy hardware works but gets punished by a performance hit.

V2 changes things around a bit and replaces io access callbacks with a
simple minimum_bus_width value. In the future we can add stride as well.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:09 +09:00
Magnus Damm 4b5a9ef527 sh: use opcode_t and enable unaligned code for sh2a
This patch converts the unaligned access handling code to use opcode_t
instead of u16. While at it, enable unaligned access handling for sh2a.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:09 +09:00
Magnus Damm 4252c659a4 sh: add byte support to the sign extension code
This patch adds byte support to the sign extension code. Unaligned access
traps should never be generated on 8-bit io operations, but we will use this
code for trapped io and we do need byte support there.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:09 +09:00
Magnus Damm 86c0179c93 sh: break out unaligned sign extension code
Break out the sign extension code since it's used in multiple places.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:07 +09:00
Paul Mundt 74d99a5e26 sh: SH-2A FPU support.
Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt 5a4f7c66be sh: Share bug/debug traps across _32 and _64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt 2f75fbf16b sh: Move in the SH-5 traps.c impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00