As I can see from the code, two places (tcp_v6_syn_recv_sock and
dccp_v6_request_recv_sock) that call this one already run with
BHs disabled, so it's safe to call __inet_inherit_port there.
Besides (in case I missed smth with code review) the calltrace
tcp_v6_syn_recv_sock
`- tcp_v4_syn_recv_sock
`- __inet_inherit_port
and the similar for DCCP are valid, but assumes BHs to be disabled.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
And no need in some IPPROTO_XXX enabling, since ipv6 code
doesn't have any filtering.
So, just set proper net and mark device with NETNS_LOCAL.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the ip_route_output_key(), dev_get_by_...() and ipv6_chk_addr()
calls are now stubbed with init_net.
Fortunately, all the places already have where to get the proper
net from.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move hashes in the struct ip6_tnl_net, replace tnls_xxx[] with
ip6n->tnlx_xxx[] and handle init and exit appropriately.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the code, that reference it already has the ip6_tnl_net pointer,
so s/ip6_fb_tnl_dev/ip6n->fb_tnl_dev/ and move creation/releasing
code into net init/exit ops.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calls to ip6_tnl_lookup were stubbed with init_net - give them
a proper one.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hashes and fallback device used in them will be per-net.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set proper net and mark a new device as NETNS_LOCAL before registering.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I.e. replace init_net stubs in ip_route_output_key() calls.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just move all the hashes on the sit_net structure and
patch the rest of the code appropriately.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev
over the code and unregister one in sit_exit_net.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace introduced in the previous patch init_net stubs
with the proper net pointer.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
... to make them prepared for future hashes and fallback device
move on the struct sit_net.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I was asked about "why don't we perform a sk_net filtering in
bind_conflict calls, like we do in other sock lookup places"
for a couple of times.
Can we please add a comment about why we do not need one?
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Directly call IPv4 and IPv6 variants where the address family is
easily known.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Move the UDP-Lite conntrack checksum validation to a generic helper
similar to nf_checksum() and make it fall back to nf_checksum()
in case the full packet is to be checksummed and hardware checksums
are available. This is to be used by DCCP conntrack, which also
needs to verify partial checksums.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Rule dumping is performed in two steps: first userspace gets the
ruleset size using getsockopt(SO_GET_INFO) and allocates memory,
then it calls getsockopt(SO_GET_ENTRIES) to actually dump the
ruleset. When another process changes the ruleset in between the
sizes from the first getsockopt call doesn't match anymore and
the kernel aborts. Unfortunately it returns EAGAIN, as for multiple
other possible errors, so userspace can't distinguish this case
from real errors.
Return EAGAIN so userspace can retry the operation.
Fixes (with current iptables SVN version) netfilter bugzilla #104.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Dump the mark value in log messages similar to nfnetlink_log. This
is useful for debugging complex setups where marks are used for
routing or traffic classification.
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patches adds a call to increment IPSTATS_MIB_OUTFORWDATAGRAMS
when forwarding the packet in ip6_mr_forward() in the IPv6 multicast
routing module (net/ipv6/ip6mr.c).
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As far as I can remember, I was going to disable privacy extensions
on all "tunnel" interfaces. Disable it on ip6-ip6 interface as well.
Also, just remove ifdefs for SIT for simplicity.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since NETDEV_REGISTER notifier chain is responsible for creating
inet6_dev{}, we do not need to call ipv6_find_idev() directly here.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes kernel bugzilla 10437
Based almost entirely upon a patch by Dmitry Butskoy.
When deciding what raw sockets to deliver the ICMPv6
to, we should use the addresses in the ICMPv6 quoted
IPV6 header, not the top-level one.
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to create seq_operations for each instance of 'netstat'.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a difference between IPv4 and IPv6 when sending packets
to the unspecified address (either 0.0.0.0 or ::) when using raw or
un-connected UDP sockets. There are two cases where IPv6 either fails
to send anything, or sends with the destination address set to ::. For
example:
--> ping -c1 0.0.0.0
PING 0.0.0.0 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.032 ms
--> ping6 -c1 ::
PING ::(::) 56 data bytes
ping: sendmsg: Invalid argument
Doing a sendto("0.0.0.0") reveals:
10:55:01.495090 IP localhost.32780 > localhost.7639: UDP, length 100
Doing a sendto("::") reveals:
10:56:13.262478 IP6 fe80::217:8ff:fe7d:4718.32779 > ::.7639: UDP, length 100
If you issue a connect() first in the UDP case, it will be sent to ::1,
similar to what happens with TCP.
This restores the BSD-ism.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
- This patch adjusts IPv6 multicast routing module, net/ipv6/ip6mr.c,
to use mroute6 header definitions instead of mroute.
(MFC6_LINES instead of MFC_LINES, MAXMIFS instead of MAXVIFS, mifi_t
instead of vifi_t.)
- In addition, inclusion of some headers was removed as it is not needed.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Check length of setsockopt's optval, which provided by user, before copy it
from user space.
For POSIX compliant, return -EINVAL for setsockopt of short lengths.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
MIP6_OPT_PAD_X are actually for paddings in destination
option header. Replace them with our standard IPV6_TLV_PADX.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Pavel Emelyanov
Denis V. Lunev
David S. Miller
Jan Engelhardt
Patrick McHardy
Robert P. J. Day
Rami Rosen
YOSHIFUJI Hideaki
Brian Haley
Wang Chen