Commit Graph

7 Commits

Author SHA1 Message Date
brakmo 71634d7f92 bpf: Add support for fq's EDT to HBM
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth
Manager). Includes a new BPF program supporting EDT, and also updates
corresponding programs.

It will drop packets with an EDT of more than 500us in the future
unless the packet belongs to a flow with less than 2 packets in flight.
This is done so each flow has at least 2 packets in flight, so they
will not starve, and also to help prevent delayed ACK timeouts.

It will also work with ECN enabled traffic, where the packets will be
CE marked if their EDT is more than 50us in the future.

The table below shows some performance numbers. The flows are back to
back RPCS. One server sending to another, either 2 or 4 flows.
One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more
than one flow of a given RPC size, the numbers represent averages.

The rate limit applies to all flows (they are in the same cgroup).
Tests ending with "-edt" ran with the new BPF program supporting EDT.
Tests ending with "-hbt" ran on top HBT qdisc with the specified rate
(i.e. no HBM). The other tests ran with the HBM BPF program included
in the HBM patch-set.

EDT has limited value when using DCTCP, but it helps in many cases when
using Cubic. It usually achieves larger link utilization and lower
99% latencies for the 1MB RPCs.
HBM ends up queueing a lot of packets with its default parameter values,
reducing the goodput of the 10KB RPCs and increasing their latency. Also,
the RTTs seen by the flows are quite large.

                         Aggr              10K  10K  10K   1MB  1MB  1MB
         Limit           rate drops  RTT  rate  P90  P99  rate  P90  P99
Test      rate  Flows    Mbps   %     us  Mbps   us   us  Mbps   ms   ms
--------  ----  -----    ---- -----  ---  ---- ---- ----  ---- ---- ----
cubic       1G    2       904  0.02  108   257  511  539   647 13.4 24.5
cubic-edt   1G    2       982  0.01  156   239  656  967   743 14.0 17.2
dctcp       1G    2       977  0.00  105   324  408  744   653 14.5 15.9
dctcp-edt   1G    2       981  0.01  142   321  417  811   660 15.7 17.0
cubic-htb   1G    2       919  0.00 1825    40 2822 4140   879  9.7  9.9

cubic     200M    2       155  0.30  220    81  532  655    74  283  450
cubic-edt 200M    2       188  0.02  222    87 1035 1095   101   84   85
dctcp     200M    2       188  0.03  111    77  912  939   111   76  325
dctcp-edt 200M    2       188  0.03  217    74 1416 1738   114   76   79
cubic-htb 200M    2       188  0.00 5015     8 14ms 15ms   180   48   50

cubic       1G    4       952  0.03  110   165  516  546   262   38  154
cubic-edt   1G    4       973  0.01  190   111 1034 1314   287   65   79
dctcp       1G    4       951  0.00  103   180  617  905   257   37   38
dctcp-edt   1G    4       967  0.00  163   151  732 1126   272   43   55
cubic-htb   1G    4       914  0.00 3249    13  7ms  8ms   300   29   34

cubic       5G    4      4236  0.00  134   305  490  624  1310   10   17
cubic-edt   5G    4      4865  0.00  156   306  425  759  1520   10   16
dctcp       5G    4      4936  0.00  128   485  221  409  1484    7    9
dctcp-edt   5G    4      4924  0.00  148   390  392  623  1508   11   26

v1 -> v2: Incorporated Andrii's suggestions
v2 -> v3: Incorporated Yonghong's suggestions
v3 -> v4: Removed credit update that is not needed

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03 15:03:00 +02:00
Daniel T. Lee 4d18f6de6a samples: bpf: refactor header include path
Currently, header inclusion in each file is inconsistent.
For example, "libbpf.h" header is included as multiple ways.

    #include "bpf/libbpf.h"
    #include "libbpf.h"

Due to commit b552d33c80 ("samples/bpf: fix include path
in Makefile"), $(srctree)/tools/lib/bpf/ path had been included
during build, path "bpf/" in header isn't necessary anymore.

This commit removes path "bpf/" in header inclusion.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-18 00:28:36 +02:00
Colin Ian King 2ed99339e9 bpf: hbm: fix spelling mistake "notifcations" -> "notificiations"
There is a spelling mistake in the help information, fix this.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-04 16:55:32 +02:00
brakmo d58c6f7212 bpf: Add more stats to HBM
Adds more stats to HBM, including average cwnd and rtt of all TCP
flows, percents of packets that are ecn ce marked and distribution
of return values.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-31 16:41:29 -07:00
brakmo ffd81558d5 bpf: Add cn support to hbm_out_kern.c
Update hbm_out_kern.c to support returning cn notifications.
Also updates relevant files to allow disabling cn notifications.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-31 16:41:29 -07:00
Colin Ian King 5b4f21b2a5 bpf: hbm: fix spelling mistake "deault" -> "default"
There are a couple of typos, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07 10:35:00 +01:00
brakmo a1270fe95b bpf: User program for testing HBM
The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.

USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
           [-w] [-h] [prog]
  Where:
   -d        Print BPF trace debug buffer
   -l        Also limit flows doing loopback
   -n <#>    To create cgroup "/hbm#" and attach prog. Default is /nrm1
             This is convenient when testing HBM in more than 1 cgroup
   -r <rate> Rate limit in Mbps
   -s        Get HBM stats (marked, dropped, etc.)
   -t <time> Exit after specified seconds (deault is 0)
   -w        Work conserving flag. cgroup can increase its bandwidth
             beyond the rate limit specified while there is available
             bandwidth. Current implementation assumes there is only
             NIC (eth0), but can be extended to support multiple NICs.
             Currrently only supported for egress. Note, this is just
	     a proof of concept.
   -h        Print this info
   prog      BPF program file name. Name defaults to hbm_out_kern.o

More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 10:48:27 -08:00