Commit Graph

246 Commits

Author SHA1 Message Date
Julia Lawall 913ae5a24e ALSA: sound/usb: Use negated usb_endpoint_xfer_control, etc
This patch extends 42a6e66f1e by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.

This patch also rewrites some calls to usb_endpoint_dir_in as negated calls
to !usb_endpoint_dir_out, and vice versa, to better correspond to the
intent of the original code.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-04 12:10:04 +01:00
Julia Lawall f4e9749f45 ALSA: Use usb_set/get_intfdata
Use the USB functions usb_get_intfdata and usb_set_intfdata instead of
dev_get_drvdata and dev_set_drvdata, respectively.

The semantic patch that makes this change for the usb_get_intfdata case is
as follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@header@
@@

#include <linux/usb.h>

@same depends on header@
position p;
@@

usb_get_intfdata@p(...) { ... }

@depends on header@
position _p!=same.p;
identifier _f;
struct usb_interface*intf;
@@

_f@_p(...) { <+...
- dev_get_drvdata(&intf->dev)
+ usb_get_intfdata(intf)
...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-02 11:52:45 +01:00
Julia Lawall 42a6e66f1e ALSA: sound/usb: use USB API functions rather than constants
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-01 10:27:33 +01:00
Takashi Iwai 8afabfa74b Merge branch 'topic/convert-tasklet' into to-push 2008-12-25 11:40:27 +01:00
Takashi Iwai 1f04128a3d ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule().  The former often causes troubles with
RT-kernels, and has actually no merit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-18 12:17:55 +01:00
Roel Kluin acc421656b ALSA: sound: Make static
Sparse asked whether these could be static.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 07:55:59 +01:00
Daniel Mack 12666f050b ALSA: snd-usb-caiaq: clean up the control adding code
snd-usb-caiaq: clean up the control adding code by moving dulpicate code
to a function.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-27 08:21:05 +01:00
Takashi Iwai e2736261b4 ALSA: usb - Add quirk for Edirol UA-25EX advanced modes
Added the quirk for UA-25EX advanced modes.
UA-25EX is almost compatible with UA-25.

Tested-by: Serge Perinsky <sergebass@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-30 11:37:01 +01:00
Li Zefan 428ffb7151 ALSA: us122l: fix missing unlock in usb_stream_hwdep_vm_fault()
Should unlock us122l->mutex before returning VM_FAULT_SIGBUS.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-15 11:41:04 +02:00
Pedro Lopez-Cabanillas 59b3db6c69 ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
The MIDI interfaces have to be detected dynamically for Edirol devices
ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by
my other patch in uaxx-quirk.

Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:57 +02:00
Pedro Lopez-Cabanillas 310e0dc01d ALSA: snd-usb-audio: support for Edirol UA-4FX device
Renamed the old quirk function for ua-700/ua-25 to become more
generic, moving the MIDI interfaces to the quirk data header.
Added a new quirk for the Edirol UA-4FX.

Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:48 +02:00
Takashi Iwai 7a17daae8e ALSA: usb - Fix possible Oops at USB-MIDI disconnection
The endpoints should be released immediately at disconnection
rather than the delayed release.  This could be a reason of Oops
at USB-audio device disconnection being used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:48 +02:00
Eran Tromer 97c889a78b ALSA: usb-audio: add support for E-Mu Tracker Pre
Add support for the E-Mu "Tracker Pre" USB sound card, following
the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB.

As with the 0202 and 0404 USB, functionality is very limited:
just a couple of sample rates, no volume/mute control, etc.

Signed-off-by: Eran Tromer <eran@tromer.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:37 +02:00
Randy Dunlap dc0abf9005 ALSA: us122l - Add missing dependency on CONFIG_SND_HWDEP
CONFIG_SND_USB_US122L uses snd_hwdep_new(), so SND_HWDEP needs
to be enabled (selected).

ERROR: "snd_hwdep_new" [sound/usb/usx2y/snd-usb-us122l.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09 09:10:57 +02:00
Takashi Iwai 7a9b8063cf ALSA: usb-audio - Add ignore_ctl_error parameter
Added the ignore_ctl_error parameter to enable/disable the control-error
handling for mixer interfaces.  It was a hard-coded ifdef, and now you
can change it more easily.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15 11:48:01 +02:00
Takashi Iwai 5e246b850d ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:40 +02:00
Phillip Michael Jordan b9c196e145 ALSA: snd_usb_audio: fix SB Extigy IR Remote regression
The support for the SB Extigy's remote seems to be broken in all
recent ALSA versions, including 1.0.17. The driver detects the event
correctly, then submits a URB to query the RC code. On the Extigy, the
URB is submitted with a length of 2 bytes. My hardware, however, only
replies with 1 byte, containing the correct RC button code. The
current implementation discards this as being too short. (line 1784 of
usbmixer.c)

This patch specifies a "minimum packet length" in the remote control
configuration. I've left the values for the Audigy 2/Live! the same as
the packet length, as I'm assuming the existing code works with them.
(I don't have the hardware to confirm) This fixes the Extigy RC
support, e.g. for use with Lirc.

Signed-off-by: Phillip Michael Jordan <phil@philjordan.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06 15:40:19 +02:00
Karsten Wiese 030a07e441 ALSA: Add USB US122L driver
Added a new US122L usb-audio driver.  This driver works together with a
dedicated alsa-lib plugin.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01 13:37:12 +02:00
Clemens Ladisch b38addb2da ALSA: usb-audio: add BOSS GT-10 support
Add a quirk entry for the BOSS GT-10.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-07-28 10:19:39 +02:00
Clemens Ladisch 83a1a3974f ALSA: usb-audio: add some Yamaha USB MIDI quirks
Add quirk entries for four Yamaha USB MIDI devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-07-10 11:05:42 +02:00
Clemens Ladisch c85ceac974 ALSA: usb-audio: fix Yamaha KX quirk
We have to restrict the quirk to interface 0 because the second
interface is not MIDI but HID. Additionally, this product ID is used
by all four KX models, so it is better to read the product name from
the device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-07-10 11:01:06 +02:00
Richard Chan bf41534506 ALSA: Add Yamaha KX49 (USB MIDI controller) to usbquirks.h
This patch is for the Yamaha USB MIDI controller KX49.
http://www.yamahasynth.com/products/kx/index.html
It has a 3-port MIDI interface and an HID interface (it has a tiny
keyboard subset).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:33:05 +02:00
Adrian Bunk 33b9cd8214 [ALSA] usbaudio.c: remove #ifndef CONFIG_USB_EHCI_SPLIT_ISO code
Since USB_EHCI_SPLIT_ISO is now unconditionally enabled the
#ifndef CONFIG_USB_EHCI_SPLIT_ISO became wrong.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06 11:54:59 +02:00
Takashi Iwai 89fe511792 sound: Convert to menuconfig
Convert menu in sound Kconfig files to menuconfig and if.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 15:56:20 +02:00
Chris Mennie 62b1263153 [ALSA] usb-audio - Support for Roland SonicCell sound module
Added entry into usbquirks.h to recognize Roland SonicCell sound module by
mostly duplicating the entry for the Roland SH-201. USB MIDI works just fine,
though the USB audio is a little unreliable (but still works well enough).

Signed-off-by: Chris Mennie <camennie@alumni.uwaterloo.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 15:56:20 +02:00
Daniel Mack f3e9d5d1fd [ALSA] snd_usb_caiaq: add support for 'Session I/O' interface
This patch adds suport for Native Instruments new
'Guitar Rig Session I/O' audio hardware.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:15 +02:00
Al Viro 8c5330a505 caiaq endianness fix
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21 16:56:00 -07:00
Takashi Iwai 9eb70e68f3 [ALSA] usb-audio - Fix race in reconnection
Fix the race at reconnection of the device.
The disconnected usb_chip[] must be cleared before the next probe
call properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:39 +02:00
Daniel Mack 6e9fc6bd5d [ALSA] snd_usb_caiaq: make high sample rates work with A8DJ
This patch for snd_usb_caiaq makes sample rates higher dann 48KHz work
with devices which have more than 2 stereo input/output pairs.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Daniel Mack 6849d49c48 [ALSA] snd_usb_caiaq: correct input channel order
This patch corrects the input channel order of hardware supported by
snd_usb_caiaq.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Daniel Mack 8d048841e8 [ALSA] snd_usb_caiaq: fix potential lockups locking
This patch fixes potential lockups in snd_usb_caiaq by refining the
locking mechanims and by using usb_kill_urb() in favor to
usb_unlink_urb().

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:35 +02:00
Pavel Machek 07f51a7274 [ALSA] sound/usb/usbaudio.c: coding style
Putting space between ! and variable is a strange coding style, fix
that, also make it fit into 80 columns where that is easy.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:34 +02:00
Pavel Machek 2a56f51bcc [ALSA] usb audio: make quirk handling more readable, and fix commented-out code
usb audio contains useful  debugging code, protected by #if
0. Unfortunately, it will not compile because variable names changed;
fix it.

Dallas workaround is formatted in a way where it is not quite obvious
what is normal code and what is quirk. Reformat it to make it obvious.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:34 +02:00
Pavel Machek b9d43bcd06 [ALSA] usb audio: Fix another Dallas quirk
Dallas USB speakers are buggy in more than one way. One of configs
they offer does not work at all.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:33 +02:00
Takashi Iwai 5a220c868e [ALSA] usb-audio - Add a proper error check
The error in check_hw_params_convention() has to be checked and
handled properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:25 +02:00
Clemens Ladisch 25a47b6b01 [ALSA] usb-audio: sort quirks list
Move some entries to their proper position so that the list is again
sorted by vendor/product ID.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-04-24 12:00:15 +02:00
Jim Meyering ff17e953cb USB: usbaudio: handle kcalloc failure
sound/usb/usbaudio.c (check_hw_params_convention): Handle kcalloc failure.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:42:25 -07:00
Clemens Ladisch d513202efd [ALSA] usb-audio: add workaround for broken E-Mu frequency feedback
Add a workaround for the feedback pipe of E-Mu 0202/0404 USB devices
that reports the number of samples per packet instead of the number of
samples per microframe.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-29 11:28:15 +01:00
Sam Ravnborg c598195a2d [ALSA] caiaq - fix section mismatch warning
Fix following warning:
WARNING: vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the function setup_card() to the function .devinit.text:snd_usb_caiaq_control_init()

setup_card() are only used by init_card().
init_card() are only used by snd_probe()
snd_probe() are used for the .probe parameter in usb_driver.probe

Annotate them all __devinit to fix the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:09 -08:00
Takashi Iwai c0792e00bc [ALSA] race between disconnect and error handling in usbmidi
The driver resubmits URBs from an error handler and schedules the error
handler from the URBs' completion handlers. To reliably kill the cycle
a flag must be used.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Nick Piggin 2f98735c9c vm audit: add VM_DONTEXPAND to mmap for drivers that need it
Drivers that register a ->fault handler, but do not range-check the
offset argument, must set VM_DONTEXPAND in the vm_flags in order to
prevent an expanding mremap from overflowing the resource.

I've audited the tree and attempted to fix these problems (usually by
adding VM_DONTEXPAND where it is not obvious).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 07:55:38 -08:00
Daniel Mack 09189ac793 [ALSA] usb/caiaq: decrease period_bytes_min
This patch decreases the snd_pcm_hardware->period_bytes_min field in the
caiaq/usb audio driver. The hardware can actually handle as few as 128
bytes, depending on the system. So it makes no sense to keep
applications from actually using such values.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Randy Dunlap 599c3e76fe [ALSA] sound: fix caiaq section mismatches
Fix section mismatch in caiaq: these __devinit functions can be
called at any time so they should not be __devinit.
WARNING: vmlinux.o(.text+0x10a8dae): Section mismatch: reference to .init.text:snd_usb_caiaq_audio_init (between 'setup_card' and 'create_card')
WARNING: vmlinux.o(.text+0x10a8dd6): Section mismatch: reference to .init.text:snd_usb_caiaq_midi_init (between 'setup_card' and 'create_card')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:01 +01:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Andrew Morton 93521d274b [ALSA] sound/usb/usbaudio.c: fix build with CONFIG_PM=n
sound/usb/usbaudio.c: In function 'usb_audio_suspend':
sound/usb/usbaudio.c:3674: error: implicit declaration of function 'snd_pcm_sus\pend_all'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:44 +01:00
Clemens Ladisch 358ce0cf3f [ALSA] usb-audio: add UR-80 PCM quirk
Add a quirk entry to handle Edirol UR-80 audio I/O.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:43 +01:00
Oliver Neukum f85bf29c94 [ALSA] usb audio suspend support
This patch implements suspend/resume support for USB audio devices.
It works with the microphone in my camera.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:36 +01:00
Nick Piggin eb415b8f6d [ALSA] alsa: usx2y nopage
Convert alsa usx2y driver from nopage to fault.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:32 +01:00
Daniel Mack 7829d0eccb [ALSA] usb-caiaq - add support for Kore controller 2
Added support for Native Instrument's Kore controller 2. This device has
no audio but MIDI, input devices and ALSA controllers only.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:29 +01:00
Takashi Iwai 7f6301cdfa [ALSA] caiaq - remove ifdef
Remove ifdef and fix Makefile for conditional builds.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:28 +01:00