Commit Graph

327 Commits

Author SHA1 Message Date
David Rientjes 6d50e60cd2 mm, thp: fix collapsing of hugepages on madvise
If an anonymous mapping is not allowed to fault thp memory and then
madvise(MADV_HUGEPAGE) is used after fault, khugepaged will never
collapse this memory into thp memory.

This occurs because the madvise(2) handler for thp, hugepage_madvise(),
clears VM_NOHUGEPAGE on the stack and it isn't stored in vma->vm_flags
until the final action of madvise_behavior().  This causes the
khugepaged_enter_vma_merge() to be a no-op in hugepage_madvise() when
the vma had previously had VM_NOHUGEPAGE set.

Fix this by passing the correct vma flags to the khugepaged mm slot
handler.  There's no chance khugepaged can run on this vma until after
madvise_behavior() returns since we hold mm->mmap_sem.

It would be possible to clear VM_NOHUGEPAGE directly from vma->vm_flags
in hugepage_advise(), but I didn't want to introduce special case
behavior into madvise_behavior().  I think it's best to just let it
always set vma->vm_flags itself.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Suleiman Souhlal <suleiman@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-29 16:33:14 -07:00
Peter Feiner 64e455079e mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set.  If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.

Here's a simple code snippet to demonstrate the bug:

  char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
                 MAP_ANONYMOUS | MAP_SHARED, -1, 0);
  system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
  assert(*m == '\0');     /* new PTE allows write access */
  assert(!soft_dirty(x));
  *m = 'x';               /* should dirty the page */
  assert(soft_dirty(x));  /* fails */

With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared.  Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.

As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect.  An analogous bug was fixed in mmap by
commit c9d0bf2414 ("mm: uncached vma support with writenotify").

Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:28 +02:00
Linus Torvalds c798360cd1 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "A lot of activities on percpu front.  Notable changes are...

   - percpu allocator now can take @gfp.  If @gfp doesn't contain
     GFP_KERNEL, it tries to allocate from what's already available to
     the allocator and a work item tries to keep the reserve around
     certain level so that these atomic allocations usually succeed.

     This will replace the ad-hoc percpu memory pool used by
     blk-throttle and also be used by the planned blkcg support for
     writeback IOs.

     Please note that I noticed a bug in how @gfp is interpreted while
     preparing this pull request and applied the fix 6ae833c7fe
     ("percpu: fix how @gfp is interpreted by the percpu allocator")
     just now.

   - percpu_ref now uses longs for percpu and global counters instead of
     ints.  It leads to more sparse packing of the percpu counters on
     64bit machines but the overhead should be negligible and this
     allows using percpu_ref for refcnting pages and in-memory objects
     directly.

   - The switching between percpu and single counter modes of a
     percpu_ref is made independent of putting the base ref and a
     percpu_ref can now optionally be initialized in single or killed
     mode.  This allows avoiding percpu shutdown latency for cases where
     the refcounted objects may be synchronously created and destroyed
     in rapid succession with only a fraction of them reaching fully
     operational status (SCSI probing does this when combined with
     blk-mq support).  It's also planned to be used to implement forced
     single mode to detect underflow more timely for debugging.

  There's a separate branch percpu/for-3.18-consistent-ops which cleans
  up the duplicate percpu accessors.  That branch causes a number of
  conflicts with s390 and other trees.  I'll send a separate pull
  request w/ resolutions once other branches are merged"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
  percpu: fix how @gfp is interpreted by the percpu allocator
  blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
  percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
  percpu_ref: add PERCPU_REF_INIT_* flags
  percpu_ref: decouple switching to percpu mode and reinit
  percpu_ref: decouple switching to atomic mode and killing
  percpu_ref: add PCPU_REF_DEAD
  percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
  percpu_ref: replace pcpu_ prefix with percpu_
  percpu_ref: minor code and comment updates
  percpu_ref: relocate percpu_ref_reinit()
  Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
  Revert "percpu: free percpu allocation info for uniprocessor system"
  percpu-refcount: make percpu_ref based on longs instead of ints
  percpu-refcount: improve WARN messages
  percpu: fix locking regression in the failure path of pcpu_alloc()
  percpu-refcount: add @gfp to percpu_ref_init()
  proportions: add @gfp to init functions
  percpu_counter: add @gfp to percpu_counter_init()
  percpu_counter: make percpu_counters_lock irq-safe
  ...
2014-10-10 07:26:02 -04:00
Sasha Levin 96dad67ff2 mm: use VM_BUG_ON_MM where possible
Dump the contents of the relevant struct_mm when we hit the bug condition.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:58 -04:00
Andrew Morton ff26f70f43 mm/mmap.c: clean up CONFIG_DEBUG_VM_RB checks
- be consistent in printing the test which failed

- one message was actually wrong (a<b != b>a)

- don't print second bogus warning if browse_rb() failed

Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Sasha Levin 81d1b09c6b mm: convert a few VM_BUG_ON callers to VM_BUG_ON_VMA
Trivially convert a few VM_BUG_ON calls to VM_BUG_ON_VMA to extract
more information when they trigger.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Cyrill Gorcunov 8764b338b3 mm: use may_adjust_brk helper
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Julien Tinnes <jln@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:55 -04:00
vishnu.ps cc71aba348 mm/mmap.c: whitespace fixes
Signed-off-by: vishnu.ps <vishnu.ps@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:52 -04:00
Tejun Heo d06efebf0c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block into for-3.18
This is to receive 0a30288da1 ("blk-mq, percpu_ref: implement a
kludge for SCSI blk-mq stall during probe") which implements
__percpu_ref_kill_expedited() to work around SCSI blk-mq stall.  The
commit reverted and patches to implement proper fix will be added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
2014-09-24 13:00:21 -04:00
Sasha Levin 8542bdfc66 mm/mmap.c: use pr_emerg when printing BUG related information
Make sure we actually see the output of validate_mm() and browse_rb()
before triggering a BUG().  pr_info isn't shown by default so the reason
for the BUG() isn't obvious.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-10 15:42:12 -07:00
Tejun Heo 908c7f1949 percpu_counter: add @gfp to percpu_counter_init()
Percpu allocator now supports allocation mask.  Add @gfp to
percpu_counter_init() so that !GFP_KERNEL allocation masks can be used
with percpu_counters too.

We could have left percpu_counter_init() alone and added
percpu_counter_init_gfp(); however, the number of users isn't that
high and introducing _gfp variants to all percpu data structures would
be quite ugly, so let's just do the conversion.  This is the one with
the most users.  Other percpu data structures are a lot easier to
convert.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
2014-09-08 09:51:29 +09:00
David Herrmann 4bb5f5d939 mm: allow drivers to prevent new writable mappings
This patch (of 6):

The i_mmap_writable field counts existing writable mappings of an
address_space.  To allow drivers to prevent new writable mappings, make
this counter signed and prevent new writable mappings if it is negative.
This is modelled after i_writecount and DENYWRITE.

This will be required by the shmem-sealing infrastructure to prevent any
new writable mappings after the WRITE seal has been set.  In case there
exists a writable mapping, this operation will fail with EBUSY.

Note that we rely on the fact that iff you already own a writable mapping,
you can increase the counter without using the helpers.  This is the same
that we do for i_writecount.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:31 -07:00
Konstantin Khlebnikov 82f71ae4a2 mm: catch memory commitment underflow
Print a warning (if CONFIG_DEBUG_VM=y) when memory commitment becomes
too negative.

This shouldn't happen any more - the previous two patches fixed the
committed_as underflow issues.

[akpm@linux-foundation.org: use VM_WARN_ONCE, per Dave]
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:19 -07:00
Mitchel Humpherys b1de0d139c mm: convert some level-less printks to pr_*
printk is meant to be used with an associated log level.  There are some
instances of printk scattered around the mm code where the log level is
missing.  Add a log level and adhere to suggestions by
scripts/checkpatch.pl by moving to the pr_* macros.

Also add the typical pr_fmt definition so that print statements can be
easily traced back to the modules where they occur, correlated one with
another, etc.  This will require the removal of some (now redundant)
prefixes on a few print statements.

Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:18 -07:00
Linus Torvalds a0abcf2e8f Merge branch 'x86/vdso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull x86 cdso updates from Peter Anvin:
 "Vdso cleanups and improvements largely from Andy Lutomirski.  This
  makes the vdso a lot less ''special''"

* 'x86/vdso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso, build: Make LE access macros clearer, host-safe
  x86/vdso, build: Fix cross-compilation from big-endian architectures
  x86/vdso, build: When vdso2c fails, unlink the output
  x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
  x86, mm: Replace arch_vma_name with vm_ops->name for vsyscalls
  x86, mm: Improve _install_special_mapping and fix x86 vdso naming
  mm, fs: Add vm_ops->name as an alternative to arch_vma_name
  x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
  x86, vdso: Remove vestiges of VDSO_PRELINK and some outdated comments
  x86, vdso: Move the vvar and hpet mappings next to the 64-bit vDSO
  x86, vdso: Move the 32-bit vdso special pages after the text
  x86, vdso: Reimplement vdso.so preparation in build-time C
  x86, vdso: Move syscall and sysenter setup into kernel/cpu/common.c
  x86, vdso: Clean up 32-bit vs 64-bit vdso params
  x86, mm: Ensure correct alignment of the fixmap
2014-06-05 08:05:29 -07:00
Huang Shijie 64ac4940d5 mm/mmap.c: remove the first mapping check
Remove the first mapping check for vma_link.  Move the mutex_lock into the
braces when vma->vm_file is true.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:01 -07:00
Duan Jiong 14bd5b458b mm/mmap.c: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
Fix a coccinelle error regarding usage of IS_ERR and PTR_ERR instead of
PTR_ERR_OR_ZERO.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:58 -07:00
Andy Lutomirski a62c34bd2a x86, mm: Improve _install_special_mapping and fix x86 vdso naming
Using arch_vma_name to give special mappings a name is awkward.  x86
currently implements it by comparing the start address of the vma to
the expected address of the vdso.  This requires tracking the start
address of special mappings and is probably buggy if a special vma
is split or moved.

Improve _install_special_mapping to just name the vma directly.  Use
it to give the x86 vvar area a name, which should make CRIU's life
easier.

As a side effect, the vvar area will show up in core dumps.  This
could be considered weird and is fixable.

[hpa: I say we accept this as-is but be prepared to deal with knocking
 out the vvars from core dumps if this becomes a problem.]

Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/276b39b6b645fb11e345457b503f17b83c2c6fd0.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-20 11:38:42 -07:00
Davidlohr Bueso 615d6e8756 mm: per-thread vma caching
This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed.  There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma().  Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.

We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality.  On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.

The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number.  The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed.  Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question.  Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:

1) System bootup: Most programs are single threaded, so the per-thread
   scheme does improve ~50% hit rate by just adding a few more slots to
   the cache.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 50.61%   | 19.90            |
| patched        | 73.45%   | 13.58            |
+----------------+----------+------------------+

2) Kernel build: This one is already pretty good with the current
   approach as we're dealing with good locality.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 75.28%   | 11.03            |
| patched        | 88.09%   | 9.31             |
+----------------+----------+------------------+

3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 70.66%   | 17.14            |
| patched        | 91.15%   | 12.57            |
+----------------+----------+------------------+

4) Ebizzy: There's a fair amount of variation from run to run, but this
   approach always shows nearly perfect hit rates, while baseline is just
   about non-existent.  The amounts of cycles can fluctuate between
   anywhere from ~60 to ~116 for the baseline scheme, but this approach
   reduces it considerably.  For instance, with 80 threads:

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 1.06%    | 91.54            |
| patched        | 99.97%   | 14.18            |
+----------------+----------+------------------+

[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:53 -07:00
Linus Torvalds f7789dc0d4 Merge branch 'locks-3.15' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
 "Highlights:

   - maintainership change for fs/locks.c.  Willy's not interested in
     maintaining it these days, and is OK with Bruce and I taking it.
   - fix for open vs setlease race that Al ID'ed
   - cleanup and consolidation of file locking code
   - eliminate unneeded BUG() call
   - merge of file-private lock implementation"

* 'locks-3.15' of git://git.samba.org/jlayton/linux:
  locks: make locks_mandatory_area check for file-private locks
  locks: fix locks_mandatory_locked to respect file-private locks
  locks: require that flock->l_pid be set to 0 for file-private locks
  locks: add new fcntl cmd values for handling file private locks
  locks: skip deadlock detection on FL_FILE_PVT locks
  locks: pass the cmd value to fcntl_getlk/getlk64
  locks: report l_pid as -1 for FL_FILE_PVT locks
  locks: make /proc/locks show IS_FILE_PVT locks as type "FLPVT"
  locks: rename locks_remove_flock to locks_remove_file
  locks: consolidate checks for compatible filp->f_mode values in setlk handlers
  locks: fix posix lock range overflow handling
  locks: eliminate BUG() call when there's an unexpected lock on file close
  locks: add __acquires and __releases annotations to locks_start and locks_stop
  locks: remove "inline" qualifier from fl_link manipulation functions
  locks: clean up comment typo
  locks: close potential race between setlease and open
  MAINTAINERS: update entry for fs/locks.c
2014-04-04 14:21:20 -07:00
Rashika Kheria eafd4dc4d7 mm/mmap.c: mark function as static
Mark function as static in mmap.c because they are not used outside this
file.

This eliminates the following warning in mm/mmap.c:

  mm/mmap.c:407:6: warning: no previous prototype for `validate_mm' [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:02 -07:00
Jeff Layton d7a06983a0 locks: fix locks_mandatory_locked to respect file-private locks
As Trond pointed out, you can currently deadlock yourself by setting a
file-private lock on a file that requires mandatory locking and then
trying to do I/O on it.

Avoid this problem by plumbing some knowledge of file-private locks into
the mandatory locking code. In order to do this, we must pass down
information about the struct file that's being used to
locks_verify_locked.

Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
2014-03-31 08:24:43 -04:00
Stefani Seibold 3935ed6a3a mm: Add new func _install_special_mapping() to mmap.c
The _install_special_mapping() is the new base function for
install_special_mapping(). This function will return a pointer of the
created VMA or a error code in an ERR_PTR()

This new function will be needed by the for the vdso 32 bit support to map the
additonal vvar and hpet pages into the 32 bit address space. This will be done
with io_remap_pfn_range() and remap_pfn_range, which requieres a vm_area_struct.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Link: http://lkml.kernel.org/r/1395094933-14252-3-git-send-email-stefani@seibold.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-03-18 12:51:56 -07:00
Cyrill Gorcunov 34228d473e mm: ignore VM_SOFTDIRTY on VMA merging
The VM_SOFTDIRTY bit affects vma merge routine: if two VMAs has all bits
in vm_flags matched except dirty bit the kernel can't longer merge them
and this forces the kernel to generate new VMAs instead.

It finally may lead to the situation when userspace application reaches
vm.max_map_count limit and get crashed in worse case

 | (gimp:11768): GLib-ERROR **: gmem.c:110: failed to allocate 4096 bytes
 |
 | (file-tiff-load:12038): LibGimpBase-WARNING **: file-tiff-load: gimp_wire_read(): error
 | xinit: connection to X server lost
 |
 | waiting for X server to shut down
 | /usr/lib64/gimp/2.0/plug-ins/file-tiff-load terminated: Hangup
 | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup
 | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup

  https://bugzilla.kernel.org/show_bug.cgi?id=67651
  https://bugzilla.gnome.org/show_bug.cgi?id=719619#c0

Initial problem came from missed VM_SOFTDIRTY in do_brk() routine but
even if we would set up VM_SOFTDIRTY here, there is still a way to
prevent VMAs from merging: one can call

 | echo 4 > /proc/$PID/clear_refs

and clear all VM_SOFTDIRTY over all VMAs presented in memory map, then
new do_brk() will try to extend old VMA and finds that dirty bit doesn't
match thus new VMA will be generated.

As discussed with Pavel, the right approach should be to ignore
VM_SOFTDIRTY bit when we're trying to merge VMAs and if merge successed
we mark extended VMA with dirty bit where needed.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reported-by: Bastian Hougaard <gnome@rvzt.net>
Reported-by: Mel Gorman <mgorman@suse.de>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:53 -08:00
Paul Gortmaker a64fb3cd61 mm: audit/fix non-modular users of module_init in core code
Code that is obj-y (always built-in) or dependent on a bool Kconfig
(built-in or absent) can never be modular.  So using module_init as an
alias for __initcall can be somewhat misleading.

Fix these up now, so that we can relocate module_init from init.h into
module.h in the future.  If we don't do this, we'd have to add module.h
to obviously non-modular code, and that would be a worse thing.

The audit targets the following module_init users for change:
 mm/ksm.c                       bool KSM
 mm/mmap.c                      bool MMU
 mm/huge_memory.c               bool TRANSPARENT_HUGEPAGE
 mm/mmu_notifier.c              bool MMU_NOTIFIER

Note that direct use of __initcall is discouraged, vs.  one of the
priority categorized subgroups.  As __initcall gets mapped onto
device_initcall, our use of subsys_initcall (which makes sense for these
files) will thus change this registration from level 6-device to level
4-subsys (i.e.  slightly earlier).

However no observable impact of that difference has been observed during
testing.

One might think that core_initcall (l2) or postcore_initcall (l3) would
be more appropriate for anything in mm/ but if we look at some actual
init functions themselves, we see things like:

mm/huge_memory.c --> hugepage_init     --> hugepage_init_sysfs
mm/mmap.c        --> init_user_reserve --> sysctl_user_reserve_kbytes
mm/ksm.c         --> ksm_init          --> sysfs_create_group

and hence the choice of subsys_initcall (l4) seems reasonable, and at
the same time minimizes the risk of changing the priority too
drastically all at once.  We can adjust further in the future.

Also, several instances of missing ";" at EOL are fixed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:52 -08:00
Davidlohr Bueso 363ee17f0f mm/mmap.c: add mlock_future_check() helper
Both do_brk and do_mmap_pgoff verify that we are actually capable of
locking future pages if the corresponding VM_LOCKED flags are used.
Encapsulate this logic into a single mlock_future_check() helper
function.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Jerome Marchand 49f0ce5f92 mm: add overcommit_kbytes sysctl variable
Some applications that run on HPC clusters are designed around the
availability of RAM and the overcommit ratio is fine tuned to get the
maximum usage of memory without swapping.  With growing memory, the
1%-of-all-RAM grain provided by overcommit_ratio has become too coarse
for these workload (on a 2TB machine it represents no less than 20GB).

This patch adds the new overcommit_kbytes sysctl variable that allow a
much finer grain.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Kirill A. Shutemov e1f56c89b0 mm: convert mm->nr_ptes to atomic_long_t
With split page table lock for PMD level we can't hold mm->page_table_lock
while updating nr_ptes.

Let's convert it to atomic_long_t to avoid races.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Alex Thorlton <athorlton@sgi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:14 +09:00
Linus Torvalds 5cbb3d216e Merge branch 'akpm' (patches from Andrew Morton)
Merge first patch-bomb from Andrew Morton:
 "Quite a lot of other stuff is banked up awaiting further
  next->mainline merging, but this batch contains:

   - Lots of random misc patches
   - OCFS2
   - Most of MM
   - backlight updates
   - lib/ updates
   - printk updates
   - checkpatch updates
   - epoll tweaking
   - rtc updates
   - hfs
   - hfsplus
   - documentation
   - procfs
   - update gcov to gcc-4.7 format
   - IPC"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
  ipc, msg: fix message length check for negative values
  ipc/util.c: remove unnecessary work pending test
  devpts: plug the memory leak in kill_sb
  ./Makefile: export initial ramdisk compression config option
  init/Kconfig: add option to disable kernel compression
  drivers: w1: make w1_slave::flags long to avoid memory corruption
  drivers/w1/masters/ds1wm.cuse dev_get_platdata()
  drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
  drivers/memstick/core/mspro_block.c: fix attributes array allocation
  drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
  kernel/panic.c: reduce 1 byte usage for print tainted buffer
  gcov: reuse kbasename helper
  kernel/gcov/fs.c: use pr_warn()
  kernel/module.c: use pr_foo()
  gcov: compile specific gcov implementation based on gcc version
  gcov: add support for gcc 4.7 gcov format
  gcov: move gcov structs definitions to a gcc version specific file
  kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
  kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
  kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
  ...
2013-11-13 15:45:43 +09:00
Jerome Marchand 00619bcc44 mm: factor commit limit calculation
The same calculation is currently done in three differents places.
Factor that code so future changes has to be made at only one place.

[akpm@linux-foundation.org: uninline vm_commit_limit()]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:11 +09:00
Akira Takeuchi 2afc745f3e mm: ensure get_unmapped_area() returns higher address than mmap_min_addr
This patch fixes the problem that get_unmapped_area() can return illegal
address and result in failing mmap(2) etc.

In case that the address higher than PAGE_SIZE is set to
/proc/sys/vm/mmap_min_addr, the address lower than mmap_min_addr can be
returned by get_unmapped_area(), even if you do not pass any virtual
address hint (i.e.  the second argument).

This is because the current get_unmapped_area() code does not take into
account mmap_min_addr.

This leads to two actual problems as follows:

1. mmap(2) can fail with EPERM on the process without CAP_SYS_RAWIO,
   although any illegal parameter is not passed.

2. The bottom-up search path after the top-down search might not work in
   arch_get_unmapped_area_topdown().

Note: The first and third chunk of my patch, which changes "len" check,
are for more precise check using mmap_min_addr, and not for solving the
above problem.

[How to reproduce]

	--- test.c -------------------------------------------------
	#include <stdio.h>
	#include <unistd.h>
	#include <sys/mman.h>
	#include <sys/errno.h>

	int main(int argc, char *argv[])
	{
		void *ret = NULL, *last_map;
		size_t pagesize = sysconf(_SC_PAGESIZE);

		do {
			last_map = ret;
			ret = mmap(0, pagesize, PROT_NONE,
				MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	//		printf("ret=%p\n", ret);
		} while (ret != MAP_FAILED);

		if (errno != ENOMEM) {
			printf("ERR: unexpected errno: %d (last map=%p)\n",
			errno, last_map);
		}

		return 0;
	}
	---------------------------------------------------------------

	$ gcc -m32 -o test test.c
	$ sudo sysctl -w vm.mmap_min_addr=65536
	vm.mmap_min_addr = 65536
	$ ./test  (run as non-priviledge user)
	ERR: unexpected errno: 1 (last map=0x10000)

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:10 +09:00
Heiko Carstens 4e99b02131 mmap: arch_get_unmapped_area(): use proper mmap base for bottom up direction
This is more or less the generic variant of commit 41aacc1eea ("x86
get_unmapped_area: Access mmap_legacy_base through mm_struct member").

So effectively architectures which use an own arch_pick_mmap_layout()
implementation but call the generic arch_get_unmapped_area() now can
also randomize their mmap_base.

All architectures which have an own arch_pick_mmap_layout() and call the
generic arch_get_unmapped_area() (arm64, s390, tile) currently set
mmap_base to TASK_UNMAPPED_BASE.  This is also true for the generic
arch_pick_mmap_layout() function.  So this change is a no-op currently.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:08 +09:00
Al Viro 72c2d53192 file->f_op is never NULL...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:54 -04:00
Yanchuan Nian 2d8a17813e mm/mmap: remove unnecessary assignment
pgoff is not used after the statement "pgoff = vma->vm_pgoff;", so the
assignment is redundant.

Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:13 -07:00
Cyrill Gorcunov d9104d1ca9 mm: track vma changes with VM_SOFTDIRTY bit
Pavel reported that in case if vma area get unmapped and then mapped (or
expanded) in-place, the soft dirty tracker won't be able to recognize this
situation since it works on pte level and ptes are get zapped on unmap,
loosing soft dirty bit of course.

So to resolve this situation we need to track actions on vma level, there
VM_SOFTDIRTY flag comes in.  When new vma area created (or old expanded)
we set this bit, and keep it here until application calls for clearing
soft dirty bit.

Thus when user space application track memory changes now it can detect if
vma area is renewed.

Reported-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:56 -07:00
Oleg Nesterov e86867720e mm: mmap_region: kill correct_wcount/inode, use allow_write_access()
correct_wcount and inode in mmap_region() just complicate the code.  This
boolean was needed previously, when deny_write_access() was called before
vma_merge(), now we can simply check VM_DENYWRITE and do
allow_write_access() if it is set.

allow_write_access() checks file != NULL, so this is safe even if it was
possible to use VM_DENYWRITE && !file.  Just we need to ensure we use the
same file which was deny_write_access()'ed, so the patch also moves "file
= vma->vm_file" down after allow_write_access().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:07 -07:00
Oleg Nesterov 077bf22b5c mm: do_mmap_pgoff: cleanup the usage of file_inode()
Simple cleanup.  Move "struct inode *inode" variable into "if (file)"
block to simplify the code and avoid the unnecessary check.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:07 -07:00
Oleg Nesterov b2c56e4f7d mm: shift VM_GROWS* check from mmap_region() to do_mmap_pgoff()
mmap() doesn't allow the non-anonymous mappings with VM_GROWS* bit set.
In particular this means that mmap_region()->vma_merge(file, vm_flags)
must always fail if "vm_flags & VM_GROWS" is set incorrectly.

So it does not make sense to check VM_GROWS* after we already allocated
the new vma, the only caller, do_mmap_pgoff(), which can pass this flag
can do the check itself.

And this looks a bit more correct, mmap_region() already unmapped the
old mapping at this stage. But if mmap() is going to fail, it should
avoid do_munmap() if possible.

Note: we check VM_GROWS at the end to ensure that do_mmap_pgoff() won't
return EINVAL in the case when it currently returns another error code.

Many thanks to Hugh who nacked the buggy v1.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:05 -07:00
Oleg Nesterov ef0855d334 mm: mempolicy: turn vma_set_policy() into vma_dup_policy()
Simple cleanup.  Every user of vma_set_policy() does the same work, this
looks a bit annoying imho.  And the new trivial helper which does
mpol_dup() + vma_set_policy() to simplify the callers.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:00 -07:00
Linus Torvalds 2b047252d0 Fix TLB gather virtual address range invalidation corner cases
Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96c ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com>
Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-16 08:52:46 -07:00
Oleg Nesterov 3964acd0db mm: mempolicy: fix mbind_range() && vma_adjust() interaction
vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this
is doubly wrong:

1. This leaks vma->vm_policy if it is not NULL and not equal to
   next->vm_policy.

   This can happen if vma_merge() expands "area", not prev (case 8).

2. This sets the wrong policy if vma_merge() joins prev and area,
   area is the vma the caller needs to update and it still has the
   old policy.

Revert commit 1444f92c84 ("mm: merging memory blocks resets
mempolicy") which introduced these problems.

Change mbind_range() to recheck mpol_equal() after vma_merge() to fix
the problem that commit tried to address.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven T Hampson <steven.t.hampson@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31 14:41:02 -07:00
Michel Lespinasse 98d1e64f95 mm: remove free_area_cache
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10 18:11:34 -07:00
Andrew Morton c103a4dc4a ipc/shmc.c: eliminate ugly 80-col tricks
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:26 -07:00
Jörn Engel 493af57804 mmap: allow MAP_HUGETLB for hugetlbfs files v2
It is counterintuitive at best that mmap'ing a hugetlbfs file with
MAP_HUGETLB fails, while mmap'ing it without will a) succeed and b)
return huge pages.

v2: use is_file_hugepages(), as suggested by Jianguo

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:24 -07:00
Libin d6e9321770 mm: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFT
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.

Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Li Zefan 091d0d55b2 shm: fix null pointer deref when userspace specifies invalid hugepage size
Dave reported an oops triggered by trinity:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: newseg+0x10d/0x390
  PGD cf8c1067 PUD cf8c2067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU: 2 PID: 7636 Comm: trinity-child2 Not tainted 3.9.0+#67
  ...
  Call Trace:
    ipcget+0x182/0x380
    SyS_shmget+0x5a/0x60
    tracesys+0xdd/0xe2

This bug was introduced by commit af73e4d950 ("hugetlbfs: fix mmap
failure in unaligned size request").

Reported-by: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Zefan <lizfan@huawei.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-09 14:22:47 -07:00
Naoya Horiguchi af73e4d950 hugetlbfs: fix mmap failure in unaligned size request
The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned.  This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.

This is a regression introduced in commit 40716e2924 ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.

To fix this, this patch partially reverts that commit, and adds
alignment code in caller side.  And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881

[akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: <iceman_dvd@yahoo.com>
Cc: Steven Truelove <steven.truelove@utoronto.ca>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 18:38:27 -07:00
Cyril Hrubis e8420a8ece mm/mmap: check for RLIMIT_AS before unmapping
Fix a corner case for MAP_FIXED when requested mapping length is larger
than rlimit for virtual memory.  In such case any overlapping mappings
are unmapped before we check for the limit and return ENOMEM.

The check is moved before the loop that unmaps overlapping parts of
existing mappings.  When we are about to hit the limit (currently mapped
pages + len > limit) we scan for overlapping pages and check again
accounting for them.

This fixes situation when userspace program expects that the previous
mappings are preserved after the mmap() syscall has returned with error.
(POSIX clearly states that successfull mapping shall replace any
previous mappings.)

This corner case was found and can be tested with LTP testcase:

testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c

In this case the mmap, which is clearly over current limit, unmaps
dynamic libraries and the testcase segfaults right after returning into
userspace.

I've also looked at the second instance of the unmapping loop in the
do_brk().  The do_brk() is called from brk() syscall and from vm_brk().
The brk() syscall checks for overlapping mappings and bails out when
there are any (so it can't be triggered from the brk syscall).  The
vm_brk() is called only from binmft handlers so it shouldn't be
triggered unless binmft handler created overlapping mappings.

Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:38 -07:00
Andrew Shewmaker 1640879afe mm: reinititalise user and admin reserves if memory is added or removed
Alter the admin and user reserves of the previous patches in this series
when memory is added or removed.

If memory is added and the reserves have been eliminated or increased
above the default max, then we'll trust the admin.

If memory is removed and there isn't enough free memory, then we need to
reset the reserves.

Otherwise keep the reserve set by the admin.

The reserve reset code is the same as the reserve initialization code.

I tested hot addition and removal by triggering it via sysfs.  The
reserves shrunk when they were set high and memory was removed.  They
were reset higher when memory was added again.

[akpm@linux-foundation.org: use register_hotmemory_notifier()]
[akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit]
[fengguang.wu@intel.com: make init_reserve_notifier() static]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:37 -07:00
Andrew Shewmaker 4eeab4f558 mm: replace hardcoded 3% with admin_reserve_pages knob
Add an admin_reserve_kbytes knob to allow admins to change the hardcoded
memory reserve to something other than 3%, which may be multiple
gigabytes on large memory systems.  Only about 8MB is necessary to
enable recovery in the default mode, and only a few hundred MB are
required even when overcommit is disabled.

This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER.

admin_reserve_kbytes is initialized to min(3% free pages, 8MB)

I arrived at 8MB by summing the RSS of sshd or login, bash, and top.

Please see first patch in this series for full background, motivation,
testing, and full changelog.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_admin_reserve() static]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:36 -07:00