Commit Graph

10 Commits

Author SHA1 Message Date
Geoff Levand bf705ad0c3 frv: Remove redundant debugging info flag
The generic makefile now sets '-Wa,--gdwarf2' in KBUILD_AFLAGS, so
this setting is no longer needed in arch makefiles.

Also remove a commented out addition of a -O1 to KBUILD_CFLAGS, and
comment text relating to these removed lines.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Geoff Levand <geoff@infradead.org> for Huawei, Linaro
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-28 10:57:24 +01:00
Thomas Gleixner cb0fcba283 frv: Use generic init_task
Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120503085034.546687215@linutronix.de
2012-05-05 13:00:23 +02:00
Sam Ravnborg c9575dc680 frv: clean up arch/frv/Makefile
- removed a lot of unused variable assignmnets
- removed unused bootstrap target
- replaced ARCHMODFLAGS with proper KBUILD_{A,C}FLAGS_MODULE assignmnets

The resuting Makefile has not been tested due to lack of toolchain,
but these were all trivial changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 14:09:45 +02:00
Sam Ravnborg 222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
David Howells ea02e3dde3 FRV: work around a possible compiler bug
Work around a possible bug in the FRV compiler.

What appears to be happening is that gcc resolves the
__builtin_constant_p() in kmalloc() to true, but then fails to reduce the
therefore constant conditions in the if-statements it guards to constant
results.

When compiling with -O2 or -Os, one single spurious error crops up in
cpuup_callback() in mm/slab.c.  This can be avoided by making the memsize
variable const.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Al Viro 00ddaf20b0 [PATCH] sanitize frv archclean
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-22 17:48:56 -07:00
David Howells 28baebae73 [PATCH] FRV: Use virtual interrupt disablement
Make the FRV arch use virtual interrupt disablement because accesses to the
processor status register (PSR) are relatively slow and because we will
soon have the need to deal with multiple interrupt controls at the same
time (separate h/w and inter-core interrupts).

The way this is done is to dedicate one of the four integer condition code
registers (ICC2) to maintaining a virtual interrupt disablement state
whilst inside the kernel.  This uses the ICC2.Z flag (Zero) to indicate
whether the interrupts are virtually disabled and the ICC2.C flag (Carry)
to indicate whether the interrupts are physically disabled.

ICC2.Z is set to indicate interrupts are virtually disabled.  ICC2.C is set
to indicate interrupts are physically enabled.  Under normal running
conditions Z==0 and C==1.

Disabling interrupts with local_irq_disable() doesn't then actually
physically disable interrupts - it merely sets ICC2.Z to 1.  Should an
interrupt then happen, the exception prologue will note ICC2.Z is set and
branch out of line using one instruction (an unlikely BEQ).  Here it will
physically disable interrupts and clear ICC2.C.

When it comes time to enable interrupts (local_irq_enable()), this simply
clears the ICC2.Z flag and invokes a trap #2 if both Z and C flags are
clear (the HI integer condition).  This can be done with the TIHI
conditional trap instruction.

The trap then physically reenables interrupts and sets ICC2.C again.  Upon
returning the interrupt will be taken as interrupts will then be enabled.
Note that whilst processing the trap, the whole exceptions system is
disabled, and so an interrupt can't happen till it returns.

If no pending interrupt had happened, ICC2.C would still be set, the HI
condition would not be fulfilled, and no trap will happen.

Saving interrupts (local_irq_save) is simply a matter of pulling the ICC2.Z
flag out of the CCR register, shifting it down and masking it off.  This
gives a result of 0 if interrupts were enabled and 1 if they weren't.

Restoring interrupts (local_irq_restore) is then a matter of taking the
saved value mentioned previously and XOR'ing it against 1.  If it was one,
the result will be zero, and if it was zero the result will be non-zero.
This result is then used to affect the ICC2.Z flag directly (it is a
condition code flag after all).  An XOR instruction does not affect the
Carry flag, and so that bit of state is unchanged.  The two flags can then
be sampled to see if they're both zero using the trap (TIHI) as for the
unconditional reenablement (local_irq_enable).

This patch also:

 (1) Modifies the debugging stub (break.S) to handle single-stepping crossing
     into the trap #2 handler and into virtually disabled interrupts.

 (2) Removes superseded fixup pointers from the second instructions in the trap
     tables (there's no a separate fixup table for this).

 (3) Declares the trap #3 vector for use in .org directives in the trap table.

 (4) Moves irq_enter() and irq_exit() in do_IRQ() to avoid problems with
     virtual interrupt handling, and removes the duplicate code that has now
     been folded into irq_exit() (softirq and preemption handling).

 (5) Tells the compiler in the arch Makefile that ICC2 is now reserved.

 (6) Documents the in-kernel ABI, including the virtual interrupts.

 (7) Renames the old irq management functions to different names.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 16:09:35 -08:00
David Howells 41be6aef38 [PATCH] frv: miscellaneous changes
Fix a number of miscellanous items:

 (1) Declare lock sections in the linker script.

 (2) Recurse in the correct manner in the arch makefile.

 (3) asm/bug.h requires asm/linkage.h to be included first. One C file puts
     asm/bug.h first.

 (4) Add an empty RTC header file to avoid missing header file errors.

 (5) sg_dma_address() should use the dma_address member of a scatter list.

 (6) Add trivial pci_unmap support.

 (7) Add pgprot_noncached()

 (8) Discard u_quad_t.

 (9) Use ~0UL rather than ULONG_MAX in unistd.h in case the latter isn't
     declared.

(10) Add an empty VGA header file to avoid missing header file errors.

(11) Add an XOR header file to use the generic XOR stuff.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:38 -08:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00