Commit Graph

59 Commits

Author SHA1 Message Date
Sagi Grimberg e2a4f55c64 TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire
In various areas of the code, it is assumed that
se_cmd->data_length describes pure data. In case
that protection information exists over the wire
(protect bits is are on) the target core re-calculates
the data length from the CDB and the backed device
block size (instead of each transport peeking in the cdb).

Modify loopback device to include protection information
in the transferred data length (like other scsi transports).

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11 13:06:50 -07:00
Roland Dreier 2426bd456a target: Report correct response length for some commands
When an initiator sends an allocation length bigger than what its
command consumes, the target should only return the actual response data
and set the residual length to the unused part of the allocation length.

Add a helper function that command handlers (INQUIRY, READ CAPACITY,
etc) can use to do this correctly, and use this code to get the correct
residual for commands that don't use the full initiator allocation in the
handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and
REPORT LUNS.

This addresses a handful of failures as reported by Christophe with
the Windows Certification Kit:

  http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515

Signed-off-by: Roland Dreier <roland@purestorage.com>
Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11 12:15:30 -07:00
Christophe Vu-Brugier c52716defd target/sbc: Check that the LBA and number of blocks are correct in VERIFY
This patch extracts LBA + sectors for VERIFY, and adds a goto check_lba
to perform the end-of-device checking.

(Update patch to drop lba_check usage - nab)

Signed-off-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11 11:52:40 -07:00
Christophe Vu-Brugier 6ef31dc720 target/sbc: Remove sbc_check_valid_sectors()
A similar check is performed at the end of sbc_parse_cdb() and is now
enforced if the SYNCHRONIZE CACHE command's backend supports
->execute_sync_cache().

(Add check_lba goto to avoid *_max_sectors checks - nab)

Signed-off-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11 11:52:40 -07:00
Nicholas Bellinger 395ccb2531 target/sbc: Add sbc_dif_read_strip software emulation
Split up __sbc_dif_verify_read() so that VERIFY READ emulation can
perform target-core specific READ_STRIP, seperate from the existing
FILEIO/RAMDISK backend emulation code.

Also add sbc_dif_read_strip() in order to determine number of sectors
using cmd->prot_length, and skip the extra sbc_dif_copy_prot().

Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:57 -07:00
Nicholas Bellinger 66a3d5bc47 target/sbc: Add sbc_dif_generate software emulation
This patch adds WRITE_INSERT emulation within target-core
using TYPE1 / TYPE3 PI modes in sbc_dif_generate() code.

This is useful in order for existing legacy fabrics that do not
support protection offloads to interact with backend devices that
currently have T10 PI enabled.

v2 changes:
   - Rename to sbc_dif_generate() (Sagi)

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:56 -07:00
Nicholas Bellinger 2d33598325 target/sbc: Only expose PI read_cap16 bits when supported by fabric
Only expose the PI protection type bits in READ_CAPACITY_16
if the session + fabric support DIX PASS operations.

Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:56 -07:00
Martin Svec a1e1774c6d Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist
When compiled with CONFIG_DEBUG_SG set, uninitialized SGL leads
to BUG() in compare_and_write_callback().

Signed-off-by: Martin Svec <martin.svec@zoner.cz>
Cc: <stable@vger.kernel.org> #3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:53 -07:00
Sagi Grimberg 03abad9e87 Target/sbc: add debug print
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:45 -07:00
Sagi Grimberg 48f5e7b3dc Target/core: Remove prot_handover use for now
This is not going to be supported soon - so drop it.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:43 -07:00
Sagi Grimberg b5b8e2989e Target/dif: Introduce protection-passthough-only mode
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP
capabilities while other transports like loopback/vhost-scsi need
perform this is software.

This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC
to signal the early LUN scan handling case where PROTECT CDB bits
are set, but no fabric buffer has been provided.

For transports which use generic new command these buffers have yet
to be allocated.

Also this way, target may support protection information
against legacy initiators (writes are inserted and reads
are stripped).

(Only set prot_pto for loopback during early special case - nab)

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:42 -07:00
Sagi Grimberg 19f9361af7 Target/sbc: Set protection operation and relevant checks
SBC-3 mandates the protection checks that must be
performed in the rdprotect/wrprotect field. Use them.
According to backstore device pi_attributes and
cdb rdprotect/wrprotect field.

(Fix incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL
 comparision in transport_generic_new_cmd - nab)
(Fix missing break in sbc_set_prot_op_checks - DanC + Sagi)

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13 12:03:02 -07:00
Sagi Grimberg 16c0ae0289 Target/sbc: Fix sbc_copy_prot for offset scatters
When copying between device and command protection scatters
we must take into account that device scatters might be offset
and we might copy outside scatter range. Thus for each cmd prot
scatter we must take the min between cmd prot scatter, dev prot
scatter, and whats left (and loop in case we havn't copied enough
from/to cmd prot scatter).

Example (single t_prot_sg of len 2048):
kernel: sbc_dif_copy_prot: se_cmd=ffff880380aaf970, left=2048, len=2048, dev_prot_sg_offset=3072, dev_prot_sg_len=4096
kernel: isert: se_cmd=ffff880380aaf970 PI error found type 0 at sector 0x2600 expected 0x0 vs actual 0x725f, lba=2580

Instead of copying 2048 from offset 3072 (copying junk outside sg
limit 4096), we must to copy 1024 and continue to next sg until
we complete cmd prot scatter.

This issue was found using iSER T10-PI offload over rd_mcp (wasn't
discovered with fileio since file_dev prot sglists are never offset).

Changes from v1:
- Fix sbc_copy_prot copy length miss-calculation

Changes from v0:
- Removed psg->offset consideration for psg_len computation
- Removed sg->offset consideration for offset condition
- Added copied consideraiton for len computation
- Added copied offset to paddr when doing memcpy

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-06 20:52:11 -08:00
Sagi Grimberg fc272ec7a2 Target/sbc: Don't use sg as iterator in sbc_verify_read
Because then this sg is passed to sbc_copy_prot which will
hit a protection fault in cases we have more than a single sg.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23 16:35:32 -08:00
Nicholas Bellinger 10762e8048 target/sbc: Fix sbc_dif_copy_prot addr offset bug
This patch fixes a bug in sbc_dif_copy_prot() where the updated addr
offset did not take into account the case where the associated
scatterlist had not been incremented.

This addresses the case where incoming protection scatterlists may
contain a length smaller than PAGE_SIZE across multiple entires,
when the target protection scatterlists are always being explicitly
filled up to PAGE_SIZE before adding another entry.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23 16:19:23 -08:00
Sagi Grimberg d6a65fdc89 Target/sbc: Fix protection copy routine
Need to take into account that protection sg_list
(copy-buffer) may consist of multiple entries.

Changes from v0:
- Changed commit description

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12 15:14:45 -08:00
Sagi Grimberg 76736db3e2 target: Report bad sector in sense data for DIF errors
SPC-4 states that data-integrity errors shall also report
the failed sector in CHECK_CONDITION response sense data
information field.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25 06:58:53 +00:00
Nicholas Bellinger 56dac14cd2 target/sbc: Add P_TYPE + PROT_EN bits to READ_CAPACITY_16
This patch updates sbc_emulate_readcapacity_16() to set
P_TYPE and PROT_EN bits when DIF emulation is enabled by
the backend device.

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18 09:53:13 +00:00
Nicholas Bellinger 41861fa831 target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulation
This patch adds support for DIF read/write verify emulation
for TARGET_DIF_TYPE1_PROT + TARGET_DIF_TYPE3_PROT operation.

This includes sbc_dif_verify_write() + sbc_dif_verify_read()
calls accessable by backend drivers to perform DIF verify
for SGL based data and protection information.

Also included is sbc_dif_copy_prot() logic to copy protection
information to/from backend provided protection SGLs.

Based on scsi_debug.c DIF TYPE1+TYPE3 emulation.

v2 changes:
  - Select CRC_T10DIF for TARGET_CORE in Kconfig (Fengguang)
  - Drop IP checksum logic from sbc_dif_v1_verify (MKP)
  - Fix offset on app_tag = 0xffff in sbc_dif_verify_read()

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18 09:53:12 +00:00
Nicholas Bellinger 499bf77b01 target/sbc: Add DIF setup in sbc_check_prot + sbc_parse_cdb
This patch adds sbc_check_prot() for performing various DIF
related CDB sanity checks, along with setting cmd->prot_type
once sanity checks have passed.

Also, add calls in sbc_parse_cdb() for READ_[10,12,16] +
WRITE_[10,12,16] to perform DIF sanity checking.

v2 changes:
  - Make sbc_check_prot defined as static (Fengguang + Wei)
  - Remove unprotected READ/WRITE warning (mkp)
  - Populate cmd->prot_type + friends (Sagi)
  - Drop SCF_PROT usage

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18 09:53:11 +00:00
Hannes Reinecke c66094bf32 target_core_alua: Referrals infrastructure
Add infrastructure for referrals.

v2 changes:

 - Fix unsigned long long division in core_alua_state_lba_dependent on
   32-bit  (Fengguang + Chen + Hannes)
 - Fix compile warning in core_alua_state_lba_dependent (nab)
 - Convert segment_* + sectors variables in core_alua_state_lba_dependent
   to u64 (Hannes)

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09 21:48:17 -08:00
Linus Torvalds b0e3636f65 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -> (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...
2013-11-22 10:52:03 -08:00
Andy Grover 7f7caf6aa7 target: Pass through I/O topology for block backstores
In addition to block size (already implemented), passing through
alignment offset, logical-to-phys block exponent, I/O granularity and
optimal I/O length will allow initiators to properly handle layout on
LUNs with 4K block sizes.

Tested with various weird values via scsi_debug module.

One thing to look at with this patch is the new block limits values --
instead of granularity 1 optimal 8192, Lio will now be returning whatever
the block device says, which may affect performance.

Signed-off-by: Andy Grover <agrover@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-12 13:44:54 -08:00
Roland Dreier 5cb770bf4b target: Return an error for WRITE SAME with ANCHOR==1
Per SBC-3, since we report ANC_SUP==0 in VPD page B2h, we need to return
an error (ILLEGAL REQUEST/INVALID FIELD IN CDB) for all WRITE SAME
requests with ANCHOR==1.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16 13:32:07 -07:00
Nicholas Bellinger db60df88ec target: Fail on non zero scsi_status in compare_and_write_callback
This patch addresses a bug for backends such as IBLOCK that perform
asynchronous completion via transport_complete_cmd(), that will call
target_complete_failure_work() -> transport_generic_request_failure(),
upon exception status and invoke cmd->transport_complete_callback()
-> compare_and_write_callback() incorrectly during the failure case.

It adds a check for a non zero se_cmd->scsi_status within the first
invocation of compare_and_write_callback(), and will jump to out plus
up se_device->caw_sem before exiting the callback.

Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-03 04:24:07 -07:00
Nicholas Bellinger d8855c154e target: Fix recursive COMPARE_AND_WRITE callback failure
This patch addresses a bug when compare_and_write_callback() invoked from
target_complete_ok_work() hits an failure from __target_execute_cmd() ->
cmd->execute_cmd(), that ends up calling transport_generic_request_failure()
-> compare_and_write_post(), thus causing SCF_COMPARE_AND_WRITE_POST to
incorrectly be set.

The result of this bug is that target_complete_ok_work() no longer hits
the if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST) check
that forces an immediate return, and instead double completes the se_cmd
in question, triggering an OOPs in the process.

This patch changes compare_and_write_post() to only set this bit when a
failure has not already occured to ensure the immediate return from within
target_complete_ok_work(), and thus allow transport_generic_request_failure()
to handle the sending of the CHECK_CONDITION exception status.

Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-03 04:24:06 -07:00
Nicholas Bellinger b7191253b3 target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size
This patch resets se_cmd->data_length for COMPARE_AND_WRITE emulation
within sbc_compare_and_write() to NoLB * block_size in order to address
a bug with FILEIO backends where a I/O failure will occur when data_length
does not match the I/O size being actually dispatched for the individual
per block READs + WRITEs.

This is done late enough in sbc_compare_and_write() after the memory
allocations have occured in transport_generic_new_cmd() to not cause
any unwanted side-effects.

Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-03 04:24:06 -07:00
Nicholas Bellinger 4c76251e8e target: Update copyright ownership/year information to 2013
Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10 20:23:36 -07:00
Nicholas Bellinger cf6d1f0964 target: Release COMPARE_AND_WRITE mutex in generic failure path
This patch adds a extra check for SCF_COMPARE_AND_WRITE within
transport_generic_request_failure() to invoke the callback for
compare_and_write_callback() or compare_and_write_done(), in
order to release se_dev->caw_mutex from the generic failure
path.

It also adds to checks within compare_and_write_callback() to
avoid processing when transport_generic_request_failure() occurs
early enough that cmd->t_data_sg or cmd->t_bidi_data_sg have not
been setup yet, nor se_dev->caw_mutex obtained from within
sbc_compare_and_write().

v4 changes:
 - Add explicit check for cmd->transport_complete_callback in
   transport_generic_request_failure() to handle case where
   sbc_compare_and_write()clears callback pointer (Dan Carpenter)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10 16:46:01 -07:00
Nicholas Bellinger a289008749 target: Add compare_and_write_post() completion callback fall through
This patch changes target_complete_ok_work() to fall through
after calling the se_cmd->transport_complete_callback() ->
compare_and_write_post() callback, by keying off the existance
of SCF_COMPARE_AND_WRITE_POST.

This is necessary because once SCF_COMPARE_AND_WRITE_POST has
been set by compare_and_write_post(), the SCSI response needs
to be sent via TFO->queue_status().

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10 16:45:13 -07:00
Nicholas Bellinger 68ff9b9b27 target: Add support for COMPARE_AND_WRITE emulation
This patch adds support for COMPARE_AND_WRITE emulation on a per block
basis.  This logic is used as an atomic test and set primative currently
used by VMWare ESX VAAI for performing array side locking of individual
VMFS extent ownership.

This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(),
and does the majority of the work within the compare_and_write_callback()
to perform the verify instance user data comparision, and subsequent
write instance user data I/O submission upon a successfull comparision.

The synchronization is enforced by se_device->caw_sem, that is obtained
before the initial READ I/O submission in sbc_compare_and_write().  The
mutex is then released upon MISCOMPARE in compare_and_write_callback(),
or upon WRITE instance user-data completion in compare_and_write_post().

The implementation currently assumes a single logical block (NoLB=1).

v4 changes:
 - Explicitly clear cmd->transport_complete_callback for two failure
   cases in sbc_compare_and_write() in order to avoid double unlock
   of ->caw_sem in compare_and_write_callback() (Dan Carpenter)

v3 changes:
 - Convert se_device->caw_mutex to ->caw_sem

v2 changes:
 - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to
   sbc_compare_and_write() during setup in sbc_parse_cdb()
 - Use sbc_compare_and_write() for initial READ submission with
   DMA_FROM_DEVICE
 - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance
   user-data in compare_and_write_callback()
 - Drop SCF_BIDI command flag usage
 - Set TRANSPORT_PROCESSING + transport_state flags before write
   instance submission, and convert to __target_execute_cmd()
 - Prevent sbc_get_size() from being being called twice to
   generate incorrect size in sbc_parse_cdb()
 - Enforce se_device->caw_mutex synchronization between initial
   READ I/O submission, and final WRITE I/O completion.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10 16:41:59 -07:00
Nicholas Bellinger a82a9538dd target: Allow sbc_ops->execute_rw() to accept SGLs + data_direction
COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE
to obtain the necessary READ payload for comparision against the
first half of the WRITE payload containing the verify user data.

Currently virtual backends expect to internally reference SGLs,
SGL nents, and data_direction, so change IBLOCK, FILEIO and RD
sbc_ops->execute_rw() to accept this values as function parameters.

Also add default sbc_execute_rw() handler for the typical case for
cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents,
and cmd->data_direction).

v2 Changes:
  - Add SCF_COMPARE_AND_WRITE command flag
  - Use sbc_execute_rw() for normal cmd->execute_rw() submission
    with expected se_cmd members.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09 14:29:28 -07:00
Nicholas Bellinger a6b0133c19 target: Add return for se_cmd->transport_complete_callback
This patch adds a sense_reason_t return to ->transport_complete_callback(),
and updates target_complete_ok_work() to invoke the call if necessary to
transport_send_check_condition_and_sense() during the failure case.

Also update xdreadwrite_callback() to use this return value.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09 14:29:26 -07:00
Roland Dreier 8dc8632aa7 target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10)
The SBC-2 specification of READ CAPACITY(10) has PMI and LOGICAL BLOCK
ADDRESS fields in the CDB; in SBC-3 these fields are simply listed as
obsolete.  However, SBC-2 also has the language

    If the PMI bit is set to zero and the LOGICAL BLOCK ADDRESS field
    is not set to zero, the device server shall terminate the command
    with CHECK CONDITION status with the sense key set to ILLEGAL
    REQUEST and the additional sense code set to INVALID FIELD IN CDB.

and in fact at least the Windows SCSI compliance test checks this
behavior.  Since no one following SBC-3 is going to set these fields,
we might as well include the check from SBC-2 and pass this test.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07 18:36:45 -07:00
Roland Dreier 09ceadc703 target: Return correct sense data for IO past the end of a device
We should use TCM_ADDRESS_OUT_OF_RANGE (-> sense data LOGICAL BLOCK
ADDRESS OUT OF RANGE) for IOs past the end of a device instead of
INVALID FIELD IN CDB.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07 18:36:45 -07:00
Asias He 86d7182985 target: Add sbc_execute_unmap() helper
iblock_execute_unmap() and fd_execute_unmap share a lot of code.
Add sbc_execute_unmap() helper to remove duplicated code for
iblock_execute_unmap() and fd_execute_unmap().

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25 01:05:24 -07:00
Hannes Reinecke 882e3f8e69 target_core_sbc: use noop for SYNCHRONIZE_CACHE
Windows does not expect SYNCHRONIZE_CACHE to be not supported,
and will generate a BSOD upon shutdown when using rd_mcp backend.
So better use a noop here.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18 12:31:16 -07:00
Roland Dreier 972b29c8f8 target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors
Trivial, but WRITE SAME is an SBC command so it seems strange for a
related function (defined in target_core_sbc.c) to be in the spc_
namespace.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-23 12:46:14 -08:00
Roland Dreier 33633676df target: Fix sense data for out-of-bounds IO operations
We're supposed to return LOGICAL BLOCK ADDRESS OUT OF RANGE, not
INVALID FIELD IN CDB.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:54:50 -08:00
Nicholas Bellinger 8b4b0dcbf7 target: Fix zero-length READ_CAPACITY_16 regression
This patch fixes a regression introduced in v3.8-rc1 code where a
zero-length READ_CAPACITY_16 was no longer returning GOOD status, but
instead returning TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE to generate
a CHECK_CONDITION status.

This regression was introduced with the following commit:

  commit de103c93af
  Author: Christoph Hellwig <hch@lst.de>
  Date:   Tue Nov 6 12:24:09 2012 -0800

      target: pass sense_reason as a return value

and this patch has been tested with the following zero-length CDB:

  sg_raw /dev/sdd 9e 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  SCSI Status: Good

  Sense Information:
  sense buffer empty

Also, convert sbc_emulate_readcapacity() to follow the same method
of handling transport_kmap_data_sg() return values, but we never
expect a zero-length request here.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-29 14:24:26 -08:00
Nicholas Bellinger ffe0067544 target: Make spc_get_write_same_sectors return sector_t
We already expect TFO->get_blocks() to return sector_t for zero value case
when doing WRITE_SAME to the end of the backend device, so go ahead and return
sector_t from spc_get_write_same_sectors() to handle this case properly.

Also, update the single iblock_execute_write_same() caller of this code.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27 22:49:25 -08:00
Dan Carpenter 6b64e1fe2b target: update error handling for sbc_setup_write_same()
We recently changed this to return positive subsystem error codes so the
error handling needs to be updated.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27 22:49:21 -08:00
Nicholas Bellinger fd9a11d707 target: Update copyright information to 2012
v2: Use correct target_core_stat.c 2006 copyright year
v3: Drop extra unnessary legal verbage from header (hch)

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27 22:47:02 -08:00
Nicholas Bellinger 773cbaf746 target: Add/check max_write_same_len device attribute + update block limits VPD
This patch adds a new max_write_same_len device attribute for use with
WRITE_SAME w/ UNMAP=0 backend emulation.  This can be useful for
lowering the default backend value (IBLOCK uses 0xFFFF).

Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to
report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during
sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated
WRITE_SAME w/ UNMAP=0 cases.

(Robert: Move max_write_same_len check in sbc_setup_write_same() to
         check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15 12:27:21 -08:00
Nicholas Bellinger cd063bef41 target/sbc: Seperate WRITE_SAME based on UNMAP flag in sbc_ops
This patch adds a new sbc_ops->execute_write_same_unmap() caller for use
with WRITE_SAME w/ UNMAP=1, and performs the ->execute_cmd() setup based
this bit within sbc_setup_write_same() code.

Also, makes the changes in sbc_parse_cdb() to handle a sense_reason_t
return from sbc_setup_write_same() on error.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15 12:04:52 -08:00
Nicholas Bellinger 1920ed61fb target: Change sbc_emulate_noop to return sense_reason_t
As reported by Fengguang Wu + 0 day build team, the sense_reason_t conversion
in for-next did not catch the recent sbc_emulate_noop() addition in mainline,
producing the following build warning in auto-next:

drivers/target/target_core_sbc.c: In function ‘sbc_parse_cdb’:
drivers/target/target_core_sbc.c:555: warning: assignment from incompatible pointer type

Go ahead and remove duplicate sbc_emulate_verify(), and change VERIFY to
use sbc_emulate_noop() as well.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 20:12:10 -08:00
Christoph Hellwig de103c93af target: pass sense_reason as a return value
Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative return
values.  This cleans up a lot of the code pathes, and with the sparse
annotations for the new sense_reason_t type allows for much better
error checking.

(nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use
      sense_reason_t with Roland's MODE SELECT changes)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:46 -08:00
Christoph Hellwig 48c2567d1a target: remove ->get_device_rev
Now that the reservations and ALUA code have been cleaned up there is no need
for the get_device_rev method, as we only need the standards revision in the
inquiry data, where we can hardcode it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig 6f23ac8a39 target: provide generic sbc device type/revision helpers
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:44 -08:00
Christoph Hellwig 9e999a6c51 target: rename spc_ops
These really are sbc_ops, so name them correctly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:44 -08:00