Commit Graph

21 Commits

Author SHA1 Message Date
Chao Yu aec71382c6 f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
   nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
   journal is full, then flush the left dirty entries to disk without merge
   journaled entries, so these journaled entries may be flushed to disk at next
   checkpoint but lost chance to flushed last time.

In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.

In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.

1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
		node num	cp count	nodes/cp
based		4599.6		1803.0		2.551
patched		2714.6		1829.6		1.483

2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S

		node num	cp count	nodes/cp
based		84.5		43.7		1.933
patched		49.2		40.0		1.23

Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns)	dirty nat count
3089219		24922
5129423		27422
4000250		24523

change log from v1:
 o fix wrong logic in add_nat_entry when grab a new nat entry set.
 o swith to create slab cache in create_node_manager_caches.
 o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.

change log from v2:
 o make comment position more appropriate suggested by Jaegeuk Kim.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-09 14:04:25 -07:00
Zhang Zhen 8b376249e7 f2fs: fix checkpatch warning
fix the following checkpatch warning:
WARNING: do {} while (0) macros should not be semicolon terminated

Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Jaegeuk Kim 54b591dfda f2fs: split grab_cache_page and wait_on_page_writeback for node pages
This patch splits grab_cache_page_write_begin into grab_cache_page and
wait_on_page_writeback for node pages.

This patch intends to enhance the latency to get node pages by alleviating
unnecessary wait_on_page_writeback.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:58 +09:00
Jaegeuk Kim 6fb03f3a40 f2fs: adjust free mem size to flush dentry blocks
If so many dirty dentry blocks are cached, not reached to the flush condition,
we should fall into livelock in balance_dirty_pages.
So, let's consider the mem size for the condition.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Chao Yu 94dac22e72 f2fs: introduce raw_nat_from_node_info() to simplfy codes
This patch introduce raw_nat_from_node_info() to simplfy some codes, and also
use exist function node_info_from_raw_nat() to do the same job.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:55 +09:00
Jaegeuk Kim 479f40c44a f2fs: skip unnecessary node writes during fsync
If multiple redundant fsync calls are triggered, we don't need to write its
node pages with fsync mark continuously.

So, this patch adds FI_NEED_FSYNC to track whether the latest node block is
written with the fsync mark or not.
If the mark was set, a new fsync doesn't need to write a node block.
Otherwise, we should do a new node block with the mark for roll-forward
recovery.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:11 +09:00
Jaegeuk Kim a5f420101d f2fs: remove unnecessary threshold
The NM_WOUT_THRESHOLD is now obsolete since f2fs starts to control on a basis
of the memory footprint.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:09 +09:00
Jaegeuk Kim cdfc41c134 f2fs: throttle the memory footprint with a sysfs entry
This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.

Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.

So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20 22:10:09 +09:00
Chao Yu 4bc8e9bcf5 f2fs: introduce f2fs_has_xattr_block for better readability
This patch introduces a help function f2fs_has_xattr_block for better
readability.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-18 09:29:46 +09:00
Jaegeuk Kim fffc2a00fc f2fs: fix to mark the checkpointed nat entry correctly
The nat cache entry maintains a status whether it is checkpointed or not.
So, if a new cache entry is loaded from the last checkpoint,
nat_entry->checkpointed should be true.
If the cache entry is modified as being dirty, nat_entry->checkpoint should
be false.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-24 16:00:40 +09:00
Chao Yu 4f4124d0b9 f2fs: update several comments
Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:26:03 +09:00
Jaegeuk Kim dbe6a5ff4f f2fs: fix the use of XATTR_NODE_OFFSET
This patch fixes the use of XATTR_NODE_OFFSET.

o The offset should not use several MSB bits which are used by marking node
blocks.

o IS_DNODE should handle XATTR_NODE_OFFSET to avoid potential abnormality
during the fsync call.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-09 14:57:56 +09:00
Gu Zheng 4559071063 f2fs: introduce help function F2FS_NODE()
Introduce help function F2FS_NODE() to simplify the conversion of node_page to
f2fs_node.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-07-30 15:17:02 +09:00
Jaegeuk Kim 354a3399dc f2fs: recover wrong pino after checkpoint during fsync
If a file is linked, f2fs loose its parent inode number so that fsync calls
for the linked file should do checkpoint all the time.
But, if we can recover its parent inode number after the checkpoint, we can
adjust roll-forward mechanism for the further fsync calls, which is able to
improve the fsync performance significatly.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-06-14 09:04:45 +09:00
Namjae Jeon a06a241603 f2fs: optimize several routines in node.h
There are various functions with common code which could be separated
out to make common routines. So, made new routines and in order to
retain the same call path and no major changes, written some macros
to access those routines.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 15:03:05 +09:00
Zhihui Zhang 3315101f70 f2fs: fix the logic of IS_DNODE()
If (ofs % (NIDS_PER_BLOCK + 1) == 0), the node is an indirect node block.

Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-09 18:21:24 +09:00
Jaegeuk Kim 56ae674cc2 f2fs: remove redundant lock_page calls
In get_node_page, we do not need to call lock_page all the time.

If the node page is cached as uptodate,

1. grab_cache_page locks the page,
2. read_node_page unlocks the page, and
3. lock_page is called for further process.

Let's avoid this.

Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-03 17:27:42 +09:00
Jaegeuk Kim 953a3e27e1 f2fs: fix to give correct parent inode number for roll forward
When we recover fsync'ed data after power-off-recovery, we should guarantee
that any parent inode number should be correct for each direct inode blocks.

So, let's make the following rules.

- The fsync should do checkpoint to all the inodes that were experienced hard
links.

- So, the only normal files can be recovered by roll-forward.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-27 09:16:25 +09:00
Jaegeuk Kim 0a8165d7c2 f2fs: adjust kernel coding style
As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment
blocks. Instead, just use "/*".

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:42 +09:00
Jaegeuk Kim 25ca923b2a f2fs: fix endian conversion bugs reported by sparse
This patch should resolve the bugs reported by the sparse tool.
Initial reports were written by "kbuild test robot" managed by fengguang.wu.

In my local machines, I've tested also by running:
> make C=2 CF="-D__CHECK_ENDIAN__"

Accordingly, I've found lots of warnings and bugs related to the endian
conversion. And I've fixed all at this moment.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:42 +09:00
Jaegeuk Kim 39a53e0ce0 f2fs: add superblock and major in-memory structure
This adds the following major in-memory structures in f2fs.

- f2fs_sb_info:
  contains f2fs-specific information, two special inode pointers for node and
  meta address spaces, and orphan inode management.

- f2fs_inode_info:
  contains vfs_inode and other fs-specific information.

- f2fs_nm_info:
  contains node manager information such as NAT entry cache, free nid list,
  and NAT page management.

- f2fs_node_info:
  represents a node as node id, inode number, block address, and its version.

- f2fs_sm_info:
  contains segment manager information such as SIT entry cache, free segment
  map, current active logs, dirty segment management, and segment utilization.
  The specific structures are sit_info, free_segmap_info, dirty_seglist_info,
  curseg_info.

In addition, add F2FS_SUPER_MAGIC in magic.h.

Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:40 +09:00