Commit Graph

1905 Commits

Author SHA1 Message Date
Fabian Frederick 1b7f8ba603 fs/ocfs2/slot_map.c: replace count*size kzalloc by kcalloc
kcalloc manages count*sizeof overflow.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:13 -07:00
Tariq Saeed bba1cb17d9 ocfs2: race between umount and unfinished remastering during recovery
Orabug: 19074140

When umount is issued during recovery on the new master that has not
finished remastering locks, it triggers BUG() in
dlm_send_mig_lockres_msg().  Here is the situation:

 1) node A has a lock on resource X mastered by node B.

 2) node B dies ->  node A sets recovering flag for res X

 3) Node C becomes the new master for resources owned by the
    dead node and is remastering locks of the dead node but
    has not finished the remastering process yet.

 4) umount is issued on node C.

 5) During processing of umount, ignoring unfished recovery,
    node C attempts to migrate resource X to node A.

 6) node A finds res X in DLM_LOCK_RES_RECOVERING state, considers
    it a logic error and sends back -EFAULT.

 7) node C asserts BUG() upon seeing EFAULT resp from node B.

Fix is to delay migrating res X till remastering is finished at which
point recovering flag will be cleared on both A and C.

Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:13 -07:00
Xue jiufei 7567c14883 ocfs2: remove conversion of total_backoff in dlm_join_domain()
The unit of total_backoff is msecs not jiffies, so no need to do the
conversion.  Otherwise, the join timeout is not 90 sec.

Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:13 -07:00
Yingtai Xie 981035b47d ocfs2: correctly check the return value of ocfs2_search_extent_list
ocfs2_search_extent_list may return -1, so we should check the return
value in ocfs2_split_and_insert, otherwise it may cause array index out of
bound.

And ocfs2_search_extent_list can only return value less than
el->l_next_free_rec, so check if it is equal or larger than
le16_to_cpu(el->l_next_free_rec) is meaningless.

Signed-off-by: Yingtai Xie <xieyingtai@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:13 -07:00
Xue jiufei ac4fef4d23 ocfs2/dlm: do not purge lockres that is queued for assert master
When workqueue is delayed, it may occur that a lockres is purged while it
is still queued for master assert.  it may trigger BUG() as follows.

N1                                         N2
dlm_get_lockres()
->dlm_do_master_requery
                                  is the master of lockres,
                                  so queue assert_master work

                                  dlm_thread() start running
                                  and purge the lockres

                                  dlm_assert_master_worker()
                                  send assert master message
                                  to other nodes
receiving the assert_master
message, set master to N2

dlmlock_remote() send create_lock message to N2, but receive DLM_IVLOCKID,
if it is RECOVERY lockres, it triggers the BUG().

Another BUG() is triggered when N3 become the new master and send
assert_master to N1, N1 will trigger the BUG() because owner doesn't
match.  So we should not purge lockres when it is queued for assert
master.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
jiangyiwen b9aaac5a6b ocfs2: do not return DLM_MIGRATE_RESPONSE_MASTERY_REF to avoid endless,loop during umount
The following case may lead to endless loop during umount.

node A         node B               node C       node D
umount volume,
migrate lockres1
to B
                                                 want to lock lockres1,
                                                 send
                                                 MASTER_REQUEST_MSG
                                                 to C
                                    init block mle
               send
               MIGRATE_REQUEST_MSG
               to C
                                    find a block
                                    mle, and then
                                    return
                                    DLM_MIGRATE_RESPONSE_MASTERY_REF
                                    to B
               set C in refmap
                                    umount successfully
               try to umount, endless
               loop occurs when migrate
               lockres1 since C is in
               refmap

So we can fix this endless loop case by only returning
DLM_MIGRATE_RESPONSE_MASTERY_REF if it has a mastery mle when receiving
MIGRATE_REQUEST_MSG.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Xue jiufei <xuejiufei@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
jiangyiwen 595297a8f9 ocfs2: manually do the iput once ocfs2_add_entry failed in ocfs2_symlink and ocfs2_mknod
When the call to ocfs2_add_entry() failed in ocfs2_symlink() and
ocfs2_mknod(), iput() will not be called during dput(dentry) because no
d_instantiate(), and this will lead to umount hung.

Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
Yiwen Jiang f7a14f32e7 ocfs2: fix a tiny race when running dirop_fileop_racer
When running dirop_fileop_racer we found a dead lock case.

2 nodes, say Node A and Node B, mount the same ocfs2 volume.  Create
/race/16/1 in the filesystem, and let the inode number of dir 16 is less
than the inode number of dir race.

Node A                            Node B
mv /race/16/1 /race/
                                  right after Node A has got the
                                  EX mode of /race/16/, and tries to
                                  get EX mode of /race
                                  ls /race/16/

In this case, Node A has got the EX mode of /race/16/, and wants to get EX
mode of /race/.  Node B has got the PR mode of /race/, and wants to get
the PR mode of /race/16/.  Since EX and PR are mutually exclusive, dead
lock happens.

This patch fixes this case by locking in ancestor order before trying
inode number order.

Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
Xue jiufei a270c6d3c0 ocfs2/dlm: fix misuse of list_move_tail() in dlm_run_purge_list()
When a lockres in purge list but is still in use, it should be moved to
the tail of purge list.  dlm_thread will continue to check next lockres in
purge list.  However, code list_move_tail(&dlm->purge_list,
&lockres->purge) will do *no* movements, so dlm_thread will purge the same
lockres in this loop again and again.  If it is in use for a long time,
other lockres will not be processed.

Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
Wengang Wang 8a8ad1c2f6 ocfs2: refcount: take rw_lock in ocfs2_reflink
This patch tries to fix this crash:

 #5 [ffff88003c1cd690] do_invalid_op at ffffffff810166d5
 #6 [ffff88003c1cd730] invalid_op at ffffffff8159b2de
    [exception RIP: ocfs2_direct_IO_get_blocks+359]
    RIP: ffffffffa05dfa27  RSP: ffff88003c1cd7e8  RFLAGS: 00010202
    RAX: 0000000000000000  RBX: ffff88003c1cdaa8  RCX: 0000000000000000
    RDX: 000000000000000c  RSI: ffff880027a95000  RDI: ffff88003c79b540
    RBP: ffff88003c1cd858   R8: 0000000000000000   R9: ffffffff815f6ba0
    R10: 00000000000001c9  R11: 00000000000001c9  R12: ffff88002d271500
    R13: 0000000000000001  R14: 0000000000000000  R15: 0000000000001000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88003c1cd860] do_direct_IO at ffffffff811cd31b
 #8 [ffff88003c1cd950] direct_IO_iovec at ffffffff811cde9c
 #9 [ffff88003c1cd9b0] do_blockdev_direct_IO at ffffffff811ce764
#10 [ffff88003c1cdb80] __blockdev_direct_IO at ffffffff811ce7cc
#11 [ffff88003c1cdbb0] ocfs2_direct_IO at ffffffffa05df756 [ocfs2]
#12 [ffff88003c1cdbe0] generic_file_direct_write_iter at ffffffff8112f935
#13 [ffff88003c1cdc40] ocfs2_file_write_iter at ffffffffa0600ccc [ocfs2]
#14 [ffff88003c1cdd50] do_aio_write at ffffffff8119126c
#15 [ffff88003c1cddc0] aio_rw_vect_retry at ffffffff811d9bb4
#16 [ffff88003c1cddf0] aio_run_iocb at ffffffff811db880
#17 [ffff88003c1cde30] io_submit_one at ffffffff811dc238
#18 [ffff88003c1cde80] do_io_submit at ffffffff811dc437
#19 [ffff88003c1cdf70] sys_io_submit at ffffffff811dc530
#20 [ffff88003c1cdf80] system_call_fastpath at ffffffff8159a159

It crashes at
        BUG_ON(create && (ext_flags & OCFS2_EXT_REFCOUNTED));
in ocfs2_direct_IO_get_blocks.

ocfs2_direct_IO_get_blocks is expecting the OCFS2_EXT_REFCOUNTED be removed in
ocfs2_prepare_inode_for_write() if it was there. But no cluster lock is taken
during the time before (or inside) ocfs2_prepare_inode_for_write() and after
ocfs2_direct_IO_get_blocks().

It can happen in this case:

Node A(which crashes)				Node B
------------------------                 ---------------------------
ocfs2_file_aio_write
  ocfs2_prepare_inode_for_write
    ocfs2_inode_lock
    ...
    ocfs2_inode_unlock
  #no refcount found
....					ocfs2_reflink
                                          ocfs2_inode_lock
                                          ...
                                          ocfs2_inode_unlock
                                          #now, refcount flag set on extent

                                        ...
                                        flush change to disk

ocfs2_direct_IO_get_blocks
  ocfs2_get_clusters
    #extent map miss
    #buffer_head miss
    read extents from disk
  found refcount flag on extent
  crash..

Fix:
Take rw_lock in ocfs2_reflink path

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
Xue jiufei b253bfd878 ocfs2: revert "ocfs2: fix NULL pointer dereference when dismount and ocfs2rec simultaneously"
75f82eaa50 ("ocfs2: fix NULL pointer dereference when dismount and
ocfs2rec simultaneously") may cause umount hang while shutting down
truncate log.

The situation is as followes:
ocfs2_dismout_volume
-> ocfs2_recovery_exit
  -> free osb->recovery_map
-> ocfs2_truncate_shutdown
  -> lock global bitmap inode
    -> ocfs2_wait_for_recovery
          -> check whether osb->recovery_map->rm_used is zero

Because osb->recovery_map is already freed, rm_used can be any other
values, so it may yield umount hang.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
Tariq Saeed 27bf6305cf ocfs2: fix deadlock when two nodes are converting same lock from PR to EX and idletimeout closes conn
Orabug: 18639535

Two node cluster and both nodes hold a lock at PR level and both want to
convert to EX at the same time.  Master node 1 has sent BAST and then
closes the connection due to idletime out.  Node 0 receives BAST, sends
unlock req with cancel flag but gets error -ENOTCONN.  The problem is
this error is ignored in dlm_send_remote_unlock_request() on the
**incorrect** assumption that the master is dead.  See NOTE in comment
why it returns DLM_NORMAL.  Upon getting DLM_NORMAL, node 0 proceeds to
sends convert (without cancel flg) which fails with -ENOTCONN.  waits 5
sec and resends.

This time gets DLM_IVLOCKID from the master since lock not found in
grant, it had been moved to converting queue in response to conv PR->EX
req.  No way out.

Node 1 (master)				Node 0
==============				======

  lock mode PR				PR

  convert PR -> EX
  mv grant -> convert and que BAST
  ...
                     <-------- convert PR -> EX
  convert que looks like this: ((node 1, PR -> EX) (node 0, PR -> EX))
  ...
                        BAST (want PR -> NL)
                     ------------------>
  ...
  idle timout, conn closed
                                ...
                                In response to BAST,
                                sends unlock with cancel convert flag
                                gets -ENOTCONN. Ignores and
                                sends remote convert request
                                gets -ENOTCONN, waits 5 Sec, retries
  ...
  reconnects
                   <----------------- convert req goes through on next try
  does not find lock on grant que
                   status DLM_IVLOCKID
                   ------------------>
  ...

No way out.  Fix is to keep retrying unlock with cancel flag until it
succeeds or the master dies.

Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
alex chen 5fb1beb069 ocfs2: should add inode into orphan dir after updating entry in ocfs2_rename()
There are two files a and b in dir /mnt/ocfs2.

    node A                           node B

  mv a b
  In ocfs2_rename(), after calling
  ocfs2_orphan_add(), the inode of
  file b will be added into orphan
  dir.

  If ocfs2_update_entry() fails,
  ocfs2_rename return error and mv
  operation fails. But file b still
  exists in the parent dir.

  ocfs2_queue_orphan_scan
   -> ocfs2_queue_recovery_completion
   -> ocfs2_complete_recovery
   -> ocfs2_recover_orphans
  The inode of the file b will be
  put with iput().

  ocfs2_evict_inode
   -> ocfs2_delete_inode
   -> ocfs2_wipe_inode
   -> ocfs2_remove_inode
  OCFS2_VALID_FL in the inode
  i_flags will be cleared.

                                   The file b still can be accessed
                                   on node B.
                                   ls /mnt/ocfs2
                                   When first read the file b with
                                   ocfs2_read_inode_block(). It will
                                   validate the inode using
                                   ocfs2_validate_inode_block().
                                   Because OCFS2_VALID_FL not set in
                                   the inode i_flags, so the file
                                   system will be readonly.

So we should add inode into orphan dir after updating entry in
ocfs2_rename().

Signed-off-by: alex.chen <alex.chen@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:45 -07:00
Linus Torvalds 16b9057804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...
2014-06-12 10:30:18 -07:00
Al Viro 9c1d5284c7 Merge commit '9f12600fe425bc28f0ccba034a77783c09c15af4' into for-linus
Backmerge of dcache.c changes from mainline.  It's that, or complete
rebase...

Conflicts:
	fs/splice.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-12 00:28:09 -04:00
Al Viro 6dc8bc0fb3 ocfs2: switch to iter_file_splice_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-12 00:21:10 -04:00
Tariq Saeed 79deb3c148 ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one
When o2net-accept-one() rejects an illegal connection, it terminates the
loop picking up the remaining queued connections.  This fix will
continue accepting connections till the queue is emtpy.

Addresses Orabug 17489469.

Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10 15:34:46 -07:00
Matthew Wilcox 1b938c0827 fs/buffer.c: remove block_write_full_page_endio()
The last in-tree caller of block_write_full_page_endio() was removed in
January 2013.  It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:02 -07:00
Xue jiufei e72db989e1 ocfs2: remove some unused code
dlm_recovery_ctxt.received is unused.

ocfs2_should_refresh_lock_res() can only return 0 or 1, so the error
handling code in ocfs2_super_lock() is unneeded.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:55 -07:00
Joseph Qi 17bf1418b7 ocfs2: fix incorrect i_size of global bitmap inode after resize
Ocfs2 cluster size may be 1MB, which has 20 bits.  When resize, the
input new clusters is mostly the number of clusters in a group
descriptor(32256).

Since the input clusters is defined as type int, so it will overflow
when shift left 20 bits and then lead to incorrect global bitmap i_size.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Joseph Qi b7ac233515 ocfs2: cleanup unused paramters in ocfs2_calc_new_backup_super
Parameters new_clusters and first_new_cluster are not used in
ocfs2_update_last_group_and_inode, so remove them.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Xue jiufei 01c6222f87 ocfs2/dlm: disallow node joining when recovery is on going
We found a race situation when dlm recovery and node joining occurs
simultaneously if the network state is bad.

N1                                      N4

start joining dlm and send
query join to all live nodes
                            set joining node to N1, return OK
send query join to other
live nodes and it may take
a while

call dlm_send_join_assert()
to send assert join message
when N2 is down, so keep
trying to send message to N2
until find N2 is down

send assert join message to
N3, but connection is down
with N3, so it may take a
while
                            become the recovery master for N2
                            and send begin reco message to other
                            nodes in domain map but no N1
connection with N3 is rebuild,
then send assert join to N4
                            call dlm_assert_joined_handler(),
                            add N1 to domain_map

                            dlm recovery done, send finalize message
                            to nodes in domain map, including N1
receiving finalize message,
trigger the BUG() because
recovery master mismatch.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Xue jiufei a9e9acaeb0 ocfs2: fix umount hang while shutting down truncate log
Revert commit 75f82eaa50 ("ocfs2: fix NULL pointer dereference when
dismount and ocfs2rec simultaneously") because it may cause a umount
hang while shutting down the truncate log.

fix NULL pointer dereference when dismount and ocfs2rec simultaneously

The situation is as followes:
ocfs2_dismout_volume
-> ocfs2_recovery_exit
  -> free osb->recovery_map
-> ocfs2_truncate_shutdown
  -> lock global bitmap inode
    -> ocfs2_wait_for_recovery
	  -> check whether osb->recovery_map->rm_used is zero

Because osb->recovery_map is already freed, rm_used can be any other
values, so it may yield umount hang.

To prevent NULL pointer dereference while getting sys_root_inode, we use
a osb_tl_disable flag to disable schedule osb_truncate_log_wq after
truncate log shutdown.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Fabian Frederick c253ed1f6f fs/ocfs2/ioctl.c: add static to local functions
ocfs_info_foo() and ocfs2_get_request_ptr functions are only used in ioctl.c

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Xue jiufei 6718cb5e0e ocfs2/dlm: fix possible convert=sion deadlock
We found there is a conversion deadlock when the owner of lockres
happened to crash before send DLM_PROXY_AST_MSG for a downconverting
lock.  The situation is as follows:

Node1                            Node2                  Node3
                           the owner of lockresA
lock_1 granted at EX mode
and call ocfs2_cluster_unlock
to decrease ex_holders.
                                                 converting lock_3 from
                                                 NL to EX
                           send DLM_PROXY_AST_MSG
                           to Node1, asking Node 1
                           to downconvert.
receiving DLM_PROXY_AST_MSG,
thread ocfs2dc send
DLM_CONVERT_LOCK_MSG
to Node2 to downconvert
lock_1(EX->NL).
                           lock_1 can be granted and
                           put it into pending_asts
                           list, return DLM_NORMAL.
                           then something happened
                           and Node2 crashed.
received DLM_NORMAL, waiting
for DLM_PROXY_AST_MSG.
                                               selected as the recovery
                                               master, receving migrate
                                               lock from Node1, queue
                                               lock_1 to the tail of
                                               converting list.

After dlm recovery, converting list in the master of lockresA(Node3)
will be: converting list head <-> lock_3(NL->EX) <->lock_1(EX<->NL).
Requested mode of lock_3 is not compatible with the granted mode of
lock_1, so it can not be granted.  and lock_1 can not downconvert
because covnerting queue is strictly FIFO.  So a deadlock is created.
We think function dlm_process_recovery_data() should queue_ast for
lock_1 or alter the order of lock_1 and lock_3, so dlm_thread can
process lock_1 first.  And if there are multiple downconverting locks,
they must convert form PR to NL, so no need to sort them.

Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Joseph Qi 55b465b668 ocfs2: limit printk when journal is aborted
Once JBD2_ABORT is set, ocfs2_commit_cache will fail in
ocfs2_commit_thread.  Then it will get into a loop with mass logs.  This
will meaninglessly consume a larger number of resource and may lead to
the system hanging.  So limit printk in this case.

[akpm@linux-foundation.org: document the msleep]
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
George Spelvin b3821c3f86 ocfs2: remove some redundant casting
There are two standard techniques for dereferencing structures pointed
to by void *: cast to the right type each time they're used, or assign
to local variables of the right type.

But there's no need to do *both*.

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Fabian Frederick 69201bb113 fs/ocfs2/super.c: use OCFS2_MAX_VOL_LABEL_LEN and strlcpy
Replace strncpy(size 63) by defined value.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:54 -07:00
Fabian Frederick 1a5c4e2a0e ocfs2: remove NULL assignments on static
Static values are automatically initialized to NULL.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:53 -07:00
Linus Torvalds c84a1e32ee Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull scheduler updates from Ingo Molnar:
 "The main scheduling related changes in this cycle were:

   - various sched/numa updates, for better performance

   - tree wide cleanup of open coded nice levels

   - nohz fix related to rq->nr_running use

   - cpuidle changes and continued consolidation to improve the
     kernel/sched/idle.c high level idle scheduling logic.  As part of
     this effort I pulled cpuidle driver changes from Rafael as well.

   - standardized idle polling amongst architectures

   - continued work on preparing better power/energy aware scheduling

   - sched/rt updates

   - misc fixlets and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  sched/numa: Decay ->wakee_flips instead of zeroing
  sched/numa: Update migrate_improves/degrades_locality()
  sched/numa: Allow task switch if load imbalance improves
  sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
  sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
  sched: Initialize rq->age_stamp on processor start
  sched, nohz: Change rq->nr_running to always use wrappers
  sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
  sched: Use clamp() and clamp_val() to make sys_nice() more readable
  sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
  sched/numa: Fix initialization of sched_domain_topology for NUMA
  sched: Call select_idle_sibling() when not affine_sd
  sched: Simplify return logic in sched_read_attr()
  sched: Simplify return logic in sched_copy_attr()
  sched: Fix exec_start/task_hot on migrated tasks
  arm64: Remove TIF_POLLING_NRFLAG
  metag: Remove TIF_POLLING_NRFLAG
  sched/idle: Make cpuidle_idle_call() void
  sched/idle: Reflow cpuidle_idle_call()
  sched/idle: Delay clearing the polling bit
  ...
2014-06-03 14:00:15 -07:00
Joseph Qi 66db6cfd49 ocfs2: fix double kmem_cache_destroy in dlm_init
In dlm_init, if create dlm_lockname_cache failed in
dlm_init_master_caches, it will destroy dlm_lockres_cache which created
before twice.  And this will cause system die when loading modules.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-23 09:37:30 -07:00
Ingo Molnar 2fe5de9ce7 Merge branch 'sched/urgent' into sched/core, to avoid conflicts
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07 13:15:46 +02:00
Al Viro 3ef045c3d8 ocfs2: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:39:40 -04:00
Al Viro 3cd9ad5a30 ocfs2: switch to ->read_iter()
tracepoints are evil, exhibit #6969...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:37:57 -04:00
Al Viro 0c949334a9 iov_iter_truncate()
Now It Can Be Done(tm) - we don't need to do iov_shorten() in
generic_file_direct_write() anymore, now that all ->direct_IO()
instances are converted to proper iov_iter methods and honour
iter->count and iter->iov_offset properly.

Get rid of count/ocount arguments of generic_file_direct_write(),
while we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:54 -04:00
Al Viro 71d8e532b1 start adding the tag to iov_iter
For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment.  Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:49 -04:00
Al Viro 31b140398c switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:46 -04:00
Al Viro d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Al Viro cb66a7a1f1 kill generic_segment_checks()
all callers of ->aio_read() and ->aio_write() have iov/nr_segs already
checked - generic_segment_checks() done after that is just an odd way
to spell iov_length().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:43 -04:00
Al Viro f8579f8673 generic_file_direct_write(): switch to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:42 -04:00
Dongsheng Yang 8698a745d8 sched, treewide: Replace hardcoded nice values with MIN_NICE/MAX_NICE
Replace various -20/+19 hardcoded nice values with MIN_NICE/MAX_NICE.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ff13819fd09b7a5dba5ab5ae797f2e7019bdfa17.1394532288.git.yangds.fnst@cn.fujitsu.com
Cc: devel@driverdev.osuosl.org
Cc: devicetree@vger.kernel.org
Cc: fcoe-devel@open-fcoe.org
Cc: linux390@de.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: nbd-general@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: openipmi-developer@lists.sourceforge.net
Cc: qla2xxx-upstream@qlogic.com
Cc: linux-arch@vger.kernel.org
[ Consolidated the patches, twiddled the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 12:07:24 +02:00
Linus Torvalds 454fd351f2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull yet more networking updates from David Miller:

 1) Various fixes to the new Redpine Signals wireless driver, from
    Fariya Fatima.

 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
    Dmitry Petukhov.

 3) UFO and TSO packets differ in whether they include the protocol
    header in gso_size, account for that in skb_gso_transport_seglen().
   From Florian Westphal.

 4) If VLAN untagging fails, we double free the SKB in the bridging
    output path.  From Toshiaki Makita.

 5) Several call sites of sk->sk_data_ready() were referencing an SKB
    just added to the socket receive queue in order to calculate the
    second argument via skb->len.  This is dangerous because the moment
    the skb is added to the receive queue it can be consumed in another
    context and freed up.

    It turns out also that none of the sk->sk_data_ready()
    implementations even care about this second argument.

    So just kill it off and thus fix all these use-after-free bugs as a
    side effect.

 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.

 7) pktgen needs to do locking properly for LLTX devices, from Daniel
    Borkmann.

 8) xen-netfront driver initializes TX array entries in RX loop :-) From
    Vincenzo Maffione.

 9) After refactoring, some tunnel drivers allow a tunnel to be
    configured on top itself.  Fix from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  net: ipv6: Fix oif in TCP SYN+ACK route lookup.
  drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
  drivers: net: cpsw: discard all packets received when interface is down
  net: Fix use after free by removing length arg from sk_data_ready callbacks.
  Drivers: net: hyperv: Address UDP checksum issues
  Drivers: net: hyperv: Negotiate suitable ndis version for offload support
  Drivers: net: hyperv: Allocate memory for all possible per-pecket information
  bridge: Fix double free and memory leak around br_allowed_ingress
  bonding: Remove debug_fs files when module init fails
  i40evf: program RSS LUT correctly
  i40evf: remove open-coded skb_cow_head
  ixgb: remove open-coded skb_cow_head
  igbvf: remove open-coded skb_cow_head
  ...
2014-04-12 17:31:22 -07:00
Linus Torvalds 5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
David S. Miller 676d23690f net: Fix use after free by removing length arg from sk_data_ready callbacks.
Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11 16:15:36 -04:00
Linus Torvalds 6f4c98e1c2 Nothing major: the stricter permissions checking for sysfs broke
a staging driver; fix included.  Greg KH said he'd take the patch
 but hadn't as the merge window opened, so it's included here
 to avoid breaking build.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQMH9AAoJENkgDmzRrbjxo4UP/jwlenP44v+RFpo/dn8Z8E2n
 SREQscU5ZZKvuyFD6kUdvOz8YC/nTrJvXoVkMUF05GVbuvb8/8UPtT9ECVemd0rW
 xNy4aFfv9rbrqRLBLpLK9LAgTuhwlbTgGxgL78zRn3hWmf1hBZWCY+cEvKM8l/+9
 oEQdORL0sUpZh7iryAeGqbOrXT4gqJEvSLOFwiYTSo6ryzWIilmdXSUAh6s8MIEX
 PR1+oH9J8B6J29lcXKMf8/sDI1EBUeSLdBmMCuN5Y7xpYxsQLroVx94kPbdBY+XK
 ZRoYuUGSUJfGRZY46cFKApIGeF07z1DGoyXghbSWEQrI+23TMUmrKUg47LSukE4Y
 yCUf8HAtqIA3gVc9GKDdSp/2UpkAhTTv5ogKgnIzs1InWtOIBdDRSVUQXDosFEXw
 6ZZe1pQs2zfXyXxO4j0Wq36K4RgI0aqOVw+dcC+w5BidjVylgnYRV0PSDd72tid7
 bIfnjDbUBo+o4LanPNGYK474KyO7AslgTE50w6zwbJzgdwCQ36hCpKqScBZzm60a
 42LrgTVoIHHWAL1tDzWL/LzWflZGdJAezzNje0/f2Q3bGMiNHWoljAvUphkTZ7qt
 E8+jWqmM+riH3e8Y5wKpO1BKt7NGHISEy//bUlnqTwisjIzVILZ6VjfugQ1AI+0x
 llTXPBotFvfvXqxunBg7
 =yzUO
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Nothing major: the stricter permissions checking for sysfs broke a
  staging driver; fix included.  Greg KH said he'd take the patch but
  hadn't as the merge window opened, so it's included here to avoid
  breaking build"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  staging: fix up speakup kobject mode
  Use 'E' instead of 'X' for unsigned module taint flag.
  VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
  kallsyms: fix percpu vars on x86-64 with relocation.
  kallsyms: generalize address range checking
  module: LLVMLinux: Remove unused function warning from __param_check macro
  Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
  module: remove MODULE_GENERIC_TABLE
  module: allow multiple calls to MODULE_DEVICE_TABLE() per module
  module: use pr_cont
2014-04-06 09:38:07 -07:00
Linus Torvalds 24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Johannes Weiner 91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Wengang Wang 9c339255cb ocfs2: pass "new" parameter to ocfs2_init_xattr_bucket
This patch fixes the following crash:

  kernel BUG at fs/ocfs2/uptodate.c:530!
  Modules linked in: ocfs2(F) ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bridge xen_pciback xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd sunrpc 8021q garp stp llc bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iTCO_wdt iTCO_vendor_support dcdbas coretemp freq_table mperf microcode pcspkr serio_raw bnx2 lpc_ich mfd_core i5k_amb i5000_edac edac_core e1000e sg shpchp ext4(F) jbd2(F) mbcache(F) dm_round_robin(F) sr_mod(F) cdrom(F) usb_storage(F) sd_mod(F) crc_t10dif(F) pata_acpi(F) ata_generic(F) ata_piix(F) mptsas(F) mptscsih(F) mptbase(F) scsi_transport_sas(F) radeon(F)
   ttm(F) drm_kms_helper(F) drm(F) hwmon(F) i2c_algo_bit(F) i2c_core(F) dm_multipath(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F)
  CPU 5
  Pid: 21303, comm: xattr-test Tainted: GF       W    3.8.13-30.el6uek.x86_64 #2 Dell Inc. PowerEdge 1950/0M788G
  RIP: ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]
  Process xattr-test (pid: 21303, threadinfo ffff880017aca000, task ffff880016a2c480)
  Call Trace:
    ocfs2_init_xattr_bucket+0x8a/0x120 [ocfs2]
    ocfs2_cp_xattr_bucket+0xbb/0x1b0 [ocfs2]
    ocfs2_extend_xattr_bucket+0x20a/0x2f0 [ocfs2]
    ocfs2_add_new_xattr_bucket+0x23e/0x4b0 [ocfs2]
    ocfs2_xattr_set_entry_index_block+0x13c/0x3d0 [ocfs2]
    ocfs2_xattr_block_set+0xf9/0x220 [ocfs2]
    __ocfs2_xattr_set_handle+0x118/0x710 [ocfs2]
    ocfs2_xattr_set+0x691/0x880 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x96/0xa0
    __vfs_setxattr_noperm+0x7b/0x170
    vfs_setxattr+0xbc/0xc0
    setxattr+0xde/0x230
    sys_fsetxattr+0xc6/0xf0
    system_call_fastpath+0x16/0x1b
  Code: 41 80 0c 24 01 48 89 df e8 7d f0 ff ff 4c 89 e6 48 89 df e8 a2 fe ff ff 48 89 df e8 3a f0 ff ff 48 8b 1c 24 4c 8b 64 24 08 c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 66 66
  RIP  ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]

It hit the BUG_ON() in ocfs2_set_new_buffer_uptodate():

    void ocfs2_set_new_buffer_uptodate(struct ocfs2_caching_info *ci,
                                       struct buffer_head *bh)
    {
          /* This should definitely *not* exist in our cache */
          if (ocfs2_buffer_cached(ci, bh))
                  printk(KERN_ERR "bh->b_blocknr: %lu @ %p\n", bh->b_blocknr, bh);
          BUG_ON(ocfs2_buffer_cached(ci, bh));

          set_buffer_uptodate(bh);

          ocfs2_metadata_cache_io_lock(ci);
          ocfs2_set_buffer_uptodate(ci, bh);
          ocfs2_metadata_cache_io_unlock(ci);
    }

The problem here is:

We cached a block, but the buffer_head got reused.  When we are to pick
up this block again, a new buffer_head created with UPTODATE flag
cleared.  ocfs2_buffer_uptodate() returned false since no UPTODATE is
set on the buffer_head.  so we set this block to cache as a NEW block,
then it failed at asserting block is not in cache.

The fix is to add a new parameter indicating the bucket is a new
allocated or not to ocfs2_init_xattr_bucket().
ocfs2_init_xattr_bucket() assert block not cached accordingly.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
jiangyiwen 43b10a2037 ocfs2: avoid system inode ref confusion by adding mutex lock
The following case may lead to the same system inode ref in confusion.

A thread                            B thread
ocfs2_get_system_file_inode
->get_local_system_inode
->_ocfs2_get_system_file_inode
                                    because of *arr == NULL,
                                    ocfs2_get_system_file_inode
                                    ->get_local_system_inode
                                    ->_ocfs2_get_system_file_inode
gets first ref thru
_ocfs2_get_system_file_inode,
gets second ref thru igrab and
set *arr = inode
                                    at the moment, B thread also gets
                                    two refs, so lead to one more
                                    inode ref.

So add mutex lock to avoid multi thread set two inode ref once at the
same time.

Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00
jiangyiwen 7dc3e83901 ocfs2: iput inode alloc when failed locally
In ocfs2_info_handle_freeinode() and ocfs2_test_inode_bit() func, after
calls ocfs2_get_system_file_inode() to get inode ref, if calls
ocfs2_info_scan_inode_alloc() or ocfs2_inode_lock() failed, we should
iput inode alloc to avoid leaking the inode.

Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:57 -07:00