Commit Graph

1184 Commits

Author SHA1 Message Date
Greg Kroah-Hartman ec94efcdad The usual mixed bag of fixes for IIO in the 4.1 cycle.
Second version of this pull request as a small fix to a fix turned
 up before Greg pulled it for a cc10001 patch near the top of the tree.
 
 One core fix
 
 * Set updated for a iio kfifo was incorrectly set to false during a failed
   update, resulting in atttempts to repeat the failed operation appearing
   to succeed.
 
 This time I've decided to list the driver fixes in alphabetical order rather
 than 'randomly'.
 
 * axp288_adc - a recent change added a check for valid info masks when
   reading channels from consumer drivers.
 * bmp280 - temperature compensation was failing to read the tfine value, hence
   causing a temperature of 0 to always be returned and incorrect presure
   measurements.
 * cc10001 - Fix channel number mapping when some channels are reserved for
   remote CPUs. Fix an issue with the use of the power-up/power-down register
   (basically wrong polarity). Fix an issue due to the missinterpretting the
   return value from regulator_get_voltage. Add a delay before the start bit
   as recommended for the hardware to avoid data corruption.
 * hid pressure - fix channel spec of modfiied, but no modifier (which makes no
   sense!)
 * hid proximity - fix channel spec of modified, but no modifier (which makes
   no sense!). Fix a memory leak in the probe function.
 * mcp320x - occasional incorrect readings on dma using spi busses due to
   cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
 * mma9551 - buffer overrun fix (miss specified maximum length of buffers)
 * mma9553 - endian fix on status message. Add an enable element for activity
   channel. Input checking for activity period to avoid rather unpredictable
   results.
 * spmi-vadc - fix an overflow in the output value normalization seen on some
   boards.
 * st-snesors - oops due to use of a mutex that is not yet initialized during
   probe.
 * xilinx adc - Some wrong register addresses, a wrong address for vccaux
   channel, incorrect scale on VREFP and incorrect sign on VREFN.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVUllEAAoJEFSFNJnE9BaIq7MP/1BLv6u7MWh1FITay4aBSR16
 o8x7fmqbXoVSNz44cU3aZ//MJOfGNZQM220iA+e01PjmS3Jqr3HxSBLI/XosVEq8
 om40h7/esiYWP61u8yZeSXr74K25dUpaz9c4Zl+/2BRYlUAPEh3b9DraXN9dE8Rs
 u0AoGnYxnPAAYEbNUinKQLDw2BoQoTBX3QgRPNJsWL2BapAAyg9JNxm7JMKJateb
 dMP0LyJ7puVqfeDLb2XzNq8eaMbBrRMIj7LNJGOO8EvzCZEC029kSWlGUAgeXYgW
 XJdj0WZ8fmYw8OVzvgci5ODVS7RXqb22j2hjA2cx/20tFDt2WjGaQAwbQckWmVJx
 cZXzPY89wvqm5jpEey79GSAP8rx7PGy7SxFl0zmuqrdXte81W7ArvGwERJBQgEWa
 VR7WA3MnJjPQtyRRC0Y/6jwe+SdbmM50JmRzB7ApMf3G3sbAdEFp0rcNe181+S9V
 AmQK4OyBP9xVgnlNlglAKeDgNuG7w/2Bp8TFXaDX+1JQP4eM1GmoDyje4/x9WOsx
 hH+Ord9Vbyy8UjFq5tHS3444bmg8mYtYnWIH7+8XImvwhhyzDx82MVkqX2S37n+T
 tMQA04ntt/r68i6KsKVGP8QFftSNJcnFxXUMr4SPigomdaooe0v6Vl7w82kxFL5o
 Im6bayZ29fOuJWJ2Rslb
 =PiG+
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.
2015-05-13 11:51:14 -07:00
Fabio Estevam f0828ba96d iio: light: hid-sensor-prox: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12 20:01:13 +01:00
Naidu Tellapati f29b212edb iio: adc: cc10001: Add delay before setting START bit
According to hardware team there should be some delay after
setting channel number, start mode and before setting START.
Add a one microsecond delay for this purpose.

Fixes: 1664f6a5b0 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12 20:01:13 +01:00
Naidu Tellapati 65a761bf8d iio: adc: cc10001: Fix regulator_get_voltage() return value check
regulator_get_voltage() returns a non-negative value in case of success,
and a negative error in case of error. Let's fix this.

Fixes: 1664f6a5b0 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12 20:01:12 +01:00
Naidu Tellapati 713276ea88 iio: adc: cc10001: Fix incorrect use of power-up/power-down register
At present we are incorrectly setting the register to 0x1 to power up
the ADC. Since it is an active high power down register, we need to set
the register to 0x0 to actually power up. Conversely, writing 0x1 to the
register powers it down.

This commit adds a couple of helpers to make the code clearer and then
use them to do the power-up/power-down properly.

Fixes: 1664f6a5b0 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12 20:00:58 +01:00
Naidu Tellapati 13415a998a iio: adc: cc10001: Fix the channel number mapping
When some of the ADC channels are reserved for remote CPUs,
the scan index and the corresponding channel number doesn't
match. This leads to convesion on the incorrect channel during
triggered capture.

Fix this by using a scan index to channel mapping encoded
in the iio_chan_spec for this purpose while starting conversion
on a particular ADC channel in trigger handler.

Also, the channel_map is not really used anywhere but in probe(), so
no need to keep track of it. Remove it from device structure.

While here, add 1 to number of channels to register timestamp channel
with the IIO core.

Fixes: 1664f6a5b0 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-08 09:37:32 -04:00
Gabriele Mazzotta e5f1efb9ae iio: kfifo: Set update_needed to false only if a buffer was allocated
Check whether the allocation of a new kfifo buffer failed or not before
setting the update_needed flag to false. This will make
iio_request_update_kfifo() try to allocate a new buffer the next time a
buffer update is requested.

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-07 23:36:58 +01:00
Michael Welling 0e81bc99a0 iio: mcp320x: Fix occasional incorrect readings
Without the cacheline alignment, the readings will occasionally incorrectly
return 0.

Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-07 11:12:20 +01:00
Irina Tirdea 1d93353da5 iio: accel: mma9553: check input value for activity period
When setting the activity period, the value introduced by
the user in sysfs is not checked for validity.

Add a boundary check so that only allowed values are
reported as successfully written to device.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reported-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26 19:43:08 +01:00
Irina Tirdea ae2ec9597c iio: accel: mma9553: add enable channel for activity
Add an enable channel for activity, so it can also
be polled independently of events or other channels.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reported-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26 19:41:59 +01:00
Irina Tirdea 2a4d20322d iio: accel: mma9551_core: prevent buffer overrun
The mma9551 functions that read/write word arrays from the
device have a limit for the buffer size given by the device
specifications.

Check that the requested buffer length is within required limits
when transferring word arrays. This will prevent buffer overrun
in the mma9551_read/write_*_words functions and also in the
mma9551_transfer call when writing into the MBOX response/request
structure.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reported-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26 19:40:53 +01:00
Irina Tirdea cd62322a97 iio: accel: mma9553: fix endianness issue when reading status
Refactor code for simplicity and clarity.

This also fixes an endianness issue with the original code.
When reading multiple registers, the received buffer of
16-bytes words is little endian (status, step count). On
big endian machines, casting them to u32 would result in
reversed order in the buffer (step count, status) leading
to incorrect values for step count and activity.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reported-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26 19:39:42 +01:00
Alban Bedel 8e71c04f86 iio:st_sensors: Fix oops when probing SPI devices
In SPI mode the transfer buffer is locked with a mutex. However this
mutex is only initilized after the probe, but some transfer needs to
be done in the probe.

To fix this bug we move the mutex initialization at the beginning of
the device probe.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-26 18:24:08 +01:00
Thomas Betker 97ffae1d30 iio: adc: xilinx: Fix VREFN sign
The VREFN channel is bipolar, not unipolar. Small negative values do
occur (e.g., -1mV), and unsigned conversion maps them incorrectly to
large positive values (about +1V), so fix this.

Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19 13:49:54 +01:00
Thomas Betker 00db4e52f4 iio: adc: xilinx: Fix VREFP scale
The scaling factor for VREFP is 3.0/4096, not 1.0/4096; fix this to get
correct readings.

Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19 13:49:44 +01:00
Thomas Betker d6c96c4228 iio: adc: xilinx: Fix "vccaux" channel .address
For the "vccaux" channel, read the VCCAUX register, not VCCINT.

Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19 13:49:00 +01:00
Thomas Betker 3960d2c0c4 iio: adc: xilinx: Fix register addresses
Define the register addresses for MIN_VCCPINT, MIN_VCCPAUX, MIN_VCCO_DDR
correctly.

Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19 13:47:58 +01:00
Srinivas Pandruvada 964e2255f1 iio: pressure: hid-sensor-press: Fix modifier
Fix "null" in the raw attribute and scan elements.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-18 20:19:36 +01:00
Srinivas Pandruvada c2aab3d58b iio: light: hid-sensor-prox: Fix modifier
Currently in_proximity_(null)_raw is getting presented as raw sysfs
attribute. Same with the scan_elements.
The modifier doesn't apply to this channel.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-18 19:12:10 +01:00
Ivan T. Ivanov 937125aca0 iio: adc: spmi-vadc: Fix overflow in output value normalization
With 'dx' equal to 0.625V and 15 bit ADC, calculations overflow
when difference against GND is ~20% of the ADC range. Fix this.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-18 17:40:04 +01:00
Linus Torvalds d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Linus Torvalds 8de29a35dc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - quite a few firmware fixes for RMI driver by Andrew Duggan

 - huion and uclogic drivers have been substantially overlaping in
   functionality laterly.  This redundancy is fixed by hid-huion driver
   being merged into hid-uclogic; work done by Benjamin Tissoires and
   Nikolai Kondrashov

 - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg

 - Some of the quirks, that got separated into individual drivers, have
   historically had EXPERT dependency.  As HID subsystem matured (as
   well as the individual drivers), this made less and less sense.  This
   dependency is now being removed by patch from Jean Delvare

 - Logitech lg4ff driver received a couple of improvements for mode
   switching, by Michal Malý

 - multitouch driver now supports clickpads, patches by Benjamin
   Tissoires and Seth Forshee

 - hid-sensor framework received a substantial update; namely support
   for Custom and Generic pages is being added; work done by Srinivas
   Pandruvada

 - wacom driver received substantial update; it now supports
   i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
   properly supported (Benjamin Tissoires), much improved battery
   reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)

 - small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  HID: sensor: Update document for custom sensor
  HID: sensor: Custom and Generic sensor support
  HID: debug: fix error handling in hid_debug_events_read()
  Input - mt: Fix input_mt_get_slot_by_key
  HID: logitech-hidpp: fix error return code
  HID: wacom: Add support for Cintiq 13HD Touch
  HID: logitech-hidpp: add a module parameter to keep firmware gestures
  HID: usbhid: yet another mouse with ALWAYS_POLL
  HID: usbhid: more mice with ALWAYS_POLL
  HID: wacom: set stylus_in_proximity before checking touch_down
  HID: wacom: use wacom_wac_finger_count_touches to set touch_down
  HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
  HID: pidff: effect can't be NULL
  HID: add quirk for PIXART OEM mouse used by HP
  HID: add HP OEM mouse to quirk ALWAYS_POLL
  HID: wacom: ask for a in-prox report when it was missed
  HID: hid-sensor-hub: Fix sparse warning
  HID: hid-sensor-hub: fix attribute read for logical usage id
  HID: plantronics: fix Kconfig default
  HID: pidff: support more than one concurrent effect
  ...
2015-04-14 09:25:26 -07:00
Linus Torvalds b79013b244 Staging driver patches for 4.1-rc1
Here's the big staging driver patchset for 4.1-rc1.
 
 There's a lot of patches here, the Outreachy application period happened
 during this development cycle, so that means that there was a lot of
 cleanup patches accepted.  Other than the normal coding style and sparse
 fixes here, there are some driver updates and work toward making some of
 the drivers into "mergable" shape (like the Unisys drivers.)
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlUsIA0ACgkQMUfUDdst+ylHuACgm8QZ9S6lk45/Qd9YeR3NSDaS
 upoAn3gVAaHnuxkW3anivuwOcirgCp3l
 =7VHU
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big staging driver patchset for 4.1-rc1.

  There's a lot of patches here, the Outreachy application period
  happened during this development cycle, so that means that there was a
  lot of cleanup patches accepted.  Other than the normal coding style
  and sparse fixes here, there are some driver updates and work toward
  making some of the drivers into "mergable" shape (like the Unisys
  drivers.)

  All of these have been in linux-next for a while"

* tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits)
  staging: lustre: orthography & coding style
  staging: lustre: lnet: lnet: fix error return code
  staging: lustre: fix sparse warning
  Revert "Staging: sm750fb: Fix C99 Comments"
  Staging: rtl8192u: use correct array for debug output
  staging: rtl8192e: Remove dead code
  staging: rtl8192e: Comment cleanup (style/format)
  staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp()
  staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp()
  staging: rtl8192e: Divide rtllib_rx_auth()
  staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings
  staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning
  staging: rtl8192e: Fix BRACES warning
  staging: rtl8192e: Fix LINE_CONTINUATIONS warning
  staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings
  staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro
  staging: rtl8192e: Fix RETURN_VOID warnings
  staging: rtl8192e: Fix UNNECESSARY_ELSE warning
  staging: rtl8723au: Remove unneeded comments
  staging: rtl8723au: Use __func__ in trace logs
  ...
2015-04-13 17:37:33 -07:00
Linus Torvalds a21c1ea656 power supply and reset changes for the v4.1 series
* new API for safe access of power supply function attrs
  * devres support for power supply (un)registration
  * new drivers / chips
   - generic syscon based poweroff driver
   - iio & charger driver for da9150
   - fuel gauge driver for axp288
   - bq27x00: add support for bq27510
   - bq2415x: add support for bq24157s
  * twl4030-madc-battery: convert to iio consumer
  * misc fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJVK8KPAAoJENju1/PIO/qaKIIP/jYZr1NJ7zrSAfm/hiCS+1Kz
 f68H5zlC3IOD2YlH7Yx3EUnag4k8wXiwp5LlRFMmek78H6UtKgr274cVyBA730Qk
 qGYyI6rZqBi9nheIwbXugUTs65R+S1bSaLksZvNfTmnKRiHUpO5nsJJezusJM/O1
 lSUJb166kR9agFL+7MSjOW4FTpqDCrndEmYOXiUmzpOS1+1ZJXPN8EMyktJxcZu9
 fxE8smy2fr0rqkZoSX4irYI28DoAqb5jImv0/GlVLVKsGukzkOkwMdKunWbFywvT
 mg/mkyfpPb3xWNUPuyVRzhgsPnaNYm5uNwr2yWuFvyxNOTweyjRriGMflewkKscf
 aGJLOiFThJrdyTjscMCfdVuNr1a+Bzd9UdiNH1I6mS99zW7wLEukHJi2CH8+9UGE
 eDRrnb6wiKAqpvIDeIatEbQUTV5JXM0vWbKIHx7m1M3P5/hLGiOWguO7V2x4RsTp
 B21mXXj6/AUYA7IKIiPjNC7HJ71J80Gali40zOYRni9MFybi1SE9MzeHNdQhdbyn
 EW+3irBTruSl93qMpsCivxMhnSeclB/PuPvH6wPOfhftlAvN+9GhGaIQzLl0mo5E
 ckXbc23QfDCwcygCnkcQy+dgQOOttk6wDUkmhAiGriciO57NgTz9KnrhOexptw+h
 2wCLGqBPSO2rADJ5RE9f
 =WbZu
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6

Pull power supply and reset changes from Sebastian Reichel:

 - new API for safe access of power supply function attrs

 - devres support for power supply (un)registration

 - new drivers / chips:
     - generic syscon based poweroff driver
     - iio & charger driver for da9150
     - fuel gauge driver for axp288
     - bq27x00: add support for bq27510
     - bq2415x: add support for bq24157s

 - twl4030-madc-battery: convert to iio consumer

 - misc fixes

* tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits)
  power: twl4030_madc_battery: Add missing MODULE_ALIAS
  power: twl4030-madc-battery: Convert to iio consumer.
  dt: power: Add docs for generic SYSCON poweroff driver.
  power: reset: Add generic SYSCON register mapped poweroff.
  power: max17042_battery: add missed blank
  power: max17042_battery: Use reg type instead of chip type
  power/reset: at91: big endian fixes for atsama5d3x
  power_supply: charger-manager: Fix dereferencing of ERR_PTR
  HID: input: Fix NULL pointer dereference when power_supply_register fails
  power: constify of_device_id array
  power/reset/rmobile-reset.c: Fix !HAS_IOMEM build
  power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable
  arm: mach-pxa: Decrement the power supply's device reference counter
  mfd: ab8500: Decrement the power supply's device reference counter
  power_supply: bq2415x_charger: Decrement the power supply's device reference counter
  power_supply: 88pm860x_charger: Decrement the power supply's device reference counter
  x86/olpc/xo15/sci: Use newly added power_supply_put API
  x86/olpc/xo1/sci: Use newly added power_supply_put API
  power_supply: charger-manager: Decrement the power supply's device reference counter
  power_supply: Increment power supply use counter when obtaining references
  ...
2015-04-13 15:21:34 -07:00
Jiri Kosina 2e455c27bd Merge branch 'for-4.1/sensor-hub' into for-linus
Conflicts:
	drivers/iio/common/hid-sensors/hid-sensor-trigger.c
	include/linux/hid-sensor-hub.h
2015-04-13 23:43:34 +02:00
Jacob Pan d0716b0ea4 iio/axp288_adc: add missing channel info mask
Commit 65de7654d3 ("iio: iio: Fix iio_channel_read return if
channel havn't info") added a check for valid info masks.

This patch adds missing channel info masks for all ADC channels.
Otherwise, iio_read_channel_raw() would return -EINVAL when called
by consumer drivers.

Note that the change of _processed to _raw actually fixes an ABI abuse
in the original driver where it was used to avoid some special handling
rather than because it was correct.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09 18:49:13 +01:00
Irina Tirdea abad398337 iio: pressure: bmp280: fix temp compensation
Temperature reads on bmp280 device always return 0,
due to a missing step in the compensation formula
(data->tfine is never initialized).

Initialize data->tfine value so we get correct
temperature and pressure values.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09 12:54:10 +01:00
Greg Kroah-Hartman c610f7f772 Merge 4.0-rc7 into staging-next
We want those fixes (iio primarily) into the -next branch to help with
merge and testing issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-07 11:03:02 +02:00
Cristina Opriceana 1ca510b0ea iio: light: ltr501: Powerdown device on error
Power down device when an error occurs  in order to avoid wasting
power. Move powerdown function up to be seen by the new call and
align parameters for the ltr501_write_contr() call.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-02 10:27:39 +02:00
Cristina Opriceana 66687e6aed iio: magnetometer: mag3110: Place driver on standby on error
Place driver on standby mode on error in order to prevent wasting
power. Move standby function above to be seen by the new call.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-01 17:24:09 +02:00
Vianney le Clément de Saint-Marcq bad4d1a074 iio: mlx90614: Support devices with dual IR sensor
The model is detected by reading the EEPROM configuration during
probing.

Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29 16:17:12 +01:00
Vianney le Clément de Saint-Marcq 209c006919 iio: mlx90614: Add symbols for accessible registers
Add symbols for all accessible RAM and EEPROM registers, as well as the
sleep command and timings defined in the datasheet.

Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29 16:17:11 +01:00
Octavian Purdila 3bbec97733 iio: bmc150_accel: add support for hardware fifo
We only advertise hardware fifo support if the I2C bus supports full
I2C or smbus I2C block data reads since it is mandatory to read the
full frame in one read (otherwise the rest of the frame is discarded).

The hardware fifo is enabled only when triggers are not active because:

(a) when using the any-motion trigger the user expects to see samples
based on ROC events, but the fifo stores samples based on the sample
frequency

(b) the data-ready trigger is waking the CPU for for every sample, so
using the hardware fifo does not have any benefit

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29 16:17:11 +01:00
Octavian Purdila f4f4673b75 iio: add support for hardware fifo
Some devices have hardware buffers that can store a number of samples
for later consumption. Hardware usually provides interrupts to notify
the processor when the FIFO is full or when it has reached a certain
watermark level. This helps with reducing the number of interrupts to
the host processor and thus it helps decreasing the power consumption.

This patch enables usage of hardware FIFOs for IIO devices in
conjunction with software device buffers. When the hardware FIFO is
enabled the samples are stored in the hardware FIFO. The samples are
later flushed to the device software buffer when the number of entries
in the hardware FIFO reaches the hardware watermark or when a flush
operation is triggered by the user when doing a non-blocking read
on an empty software device buffer.

In order to implement hardware FIFO support the device drivers must
implement the following new operations: setting and getting the
hardware FIFO watermark level, flushing the hardware FIFO to the
software device buffer. The device must also expose information about
the hardware FIFO such it's minimum and maximum watermark and if
necessary a list of supported watermark values. Finally, the device
driver must activate the hardware FIFO when the device buffer is
enabled, if the current device settings allows it.

The software device buffer watermark is passed by the IIO core to the
device driver as a hint for the hardware FIFO watermark. The device
driver can adjust this value to allow for hardware limitations (such
as capping it to the maximum hardware watermark or adjust it to a
value that is supported by the hardware). It can also disable the
hardware watermark (and implicitly the hardware FIFO) it this value is
below the minimum hardware watermark.

Since a driver may support hardware FIFO only when not in triggered
buffer mode (due to different semantics of hardware FIFO sampling and
triggered sampling) this patch changes the IIO core code to allow
falling back to non-triggered buffered mode if no trigger is enabled.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29 16:17:10 +01:00
Josselin Costanzi 37d3455672 iio: add watermark logic to iio read and poll
Currently the IIO buffer blocking read only wait until at least one
data element is available.
This patch makes the reader sleep until enough data is collected before
returning to userspace. This should limit the read() calls count when
trying to get data in batches.

Co-author: Yannick Bedhomme <yannick.bedhomme@mobile-devices.fr>
Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
[rebased and remove buffer timeout]
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29 16:17:09 +01:00
Darshana Padmadas 4ce7ca89d6 iio: imu: Use iio_trigger_get for indio_dev->trig assignment
This patch uses iio_trigger_get to increment the reference
count of trigger device, to avoid incorrect assignment.
Can result in a null pointer dereference during removal if the
trigger has been changed before removal.

This patch refers to a similar situation encountered through the
following discussion:
http://www.spinics.net/lists/linux-iio/msg13669.html

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 13:51:40 +00:00
Stefan Agner f54e9f2be3 iio: adc: vf610: use ADC clock within specification
Depending on conversion mode used, the ADC clock (ADCK) needs
to be below a maximum frequency. According to Vybrid's data
sheet this is 20MHz for the low power conversion mode.

The ADC clock is depending on input clock, which is the bus
clock by default. Vybrid SoC are typically clocked at at 400MHz
or 500MHz, which leads to 66MHz or 83MHz bus clock respectively.
Hence, a divider of 8 is required to stay below the specified
maximum clock of 20MHz.

Due to the different bus clock speeds, the resulting sampling
frequency is not static. Hence use the ADC clock and calculate
the actual available sampling frequency dynamically.

This fixes bogous values observed on some 500MHz clocked Vybrid
SoC. The resulting value usually showed Bit 9 being stuck at 1,
or 0, which lead to a value of +/-512.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Fugang Duan <B38611@freescale.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 12:00:02 +00:00
Richard Weinberger bbc45f3ab7 iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
Fixes:
drivers/built-in.o: In function `cc10001_adc_probe':
cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource'

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 11:59:31 +00:00
Robert Dolca 9444a300c2 IIO: Add support for L3GD20H gyroscope
It can be used exactly like L3GD20 but it has a different WhoAmI
register value.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 11:13:35 +00:00
Antonio Fiol a878a1a61a iio: max517: Add support for MAX520 and MAX521 chips.
MAX520 and MAX521 are protocol-compatible with the already supported
chips, just have more channels.

Signed-off-by: Antonio Fiol <antonio@fiol.es>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 10:57:34 +00:00
Fabian Frederick 7253606d38 iio: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 10:55:37 +00:00
Linus Walleij 3acddf74f8 iio: st-sensors: add support for lis3lv02d accelerometer
This adds support for the LIS3LV02 accelerometer found in the
ST Microelectronics Nomadik board series.

Cc: devicetree@vger.kernel.org
Cc: Denis CIOCCA <denis.ciocca@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28 10:55:36 +00:00
Greg Kroah-Hartman dc5f2c5f6a First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle.
New drivers
 * CM3323 color sensor.
 * MS5611 pressure and temperature sensor.
 
 New functionality
 * mup6050 - create mux clients for devices described via ACPI. The reasoning
      and approach taken in this patch are complex.  Basically there is no
      otherway of finding out what is there than by some esoteric look ups in
      the ACPI data.
 * cm3232 - PM support
 * itg3200 - suspend/resume support
 * mcp320x - add more ADCs to the kconfig to reflect what the driver supports
      (this patch and the bindings got left behind when the support was added
       a while back).
 
 Docs / utils
 * ti-adc128s052 - DT bindings.
 * mcp3422 - DT bindings.
 * mcp320x - DT bindings
 * ABI docs for event threshold scale attributes, in_magn_offset, proximity
   scan_element and thresh falling/rising values for accelerometers.  All
   elements long in use that have slipped by being explicitly documented.
 * Tidy up the tools previously in drivers/staging/iio/Documentation and move
   them out to /tools/iio. Yet another move that should have happened long ago.
   This time Roberta Dobrescu did the leg work.  Thanks!
 
 Core Cleanups
 * Export userspace IIO headers.  We should have done the appropriate header
   splitting a long time ago. Thanks to Daniel for sorting this out.
 
 * Refactor the registring of attributes for buffers to move all non-custom
   ones to a vector allowing easier additions to the current set in the future.
 
 Driver Cleanups
 * gpiod related cleanups.  Make use of the additional parameter to specify
   	initial direciton to avoid extra code.
 * bmc150 - Various refactorings to reduce code repitition and prepare for
            hardware buffer support.  Some of these cleanups are good even
 	   without the new functionality.
 * kmx61 - direct use of index to an array avoiding a structure element which
           was always the index to an element in an array of that structure.
 * vf610 - avoid incorrect type for return from wait_for_completion_timeout.
 * gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
 * ade7754 - improve error handling including suppressing some build warnings.
 * ade7759 - improve error handling including suppressing some build warnings.
 * hmc5843 - Long line and indentation fixes. Also some constifying of various
       constant data.
 * ade7854 - 80+ character line splitting.
 * ad2s1210 - fix wrong printf format string.
 * mxs-lradc - fix wrong printf format string.
 * ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
 * periodic rtc trigger - make the frequency type an unsigned int as it
   is always treated as such.
 * jsa1212 - constify struct regmap_config as it is constant.
 * ad7793 - typo in the MODULE_DESCRIPTION
 * mma9551 - check gpiod_to_irq errors.  Note that this doesn't actually cause
     any trouble but is worth tidying up as obviously incorrect.
 * mlx90614 - refactor the register symbols to make it clear which reads are to
     RAM not PROM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVBe4zAAoJEFSFNJnE9BaISXAP+wcVdU9PyiLdpjh7D73qbbV0
 KnKJHdO+aKe4hCv6Xl0fWIbJcsxTn8ALPHkkxHnu06hd2Q9zANgdJ5dER5XB34fX
 vw+EjsIdiyCDmoOVGzP5SsmbSoO3gNoR5GdWmjKFKjr0eSxinh3AmAesTVSC2T9Y
 vHkjgDj3KaqN735brd2GneeG/s3jY8ZZaiTZ0jFotCtSmBAiPi8uYwIwMLmVpsVu
 M3tcUPWKithRoyKBmO4tiDg2Qwnj0IhN8zyIYiUBftxCIIY7tSlQkYgRzDmrxGG2
 HCITf33Ss87UH0IF1BOm5PXjQ3ClI3idtCwqCeXscAo6IXmoe/+BsXR/m2JqUTdp
 EOrORyzsHc0WkJK8dnp1h1XfiBR4UQpiwce5xGFbni2ycfNBw1/J0l7QTi45D6Z7
 SdGXTgt1AWd8MoWxcxMhWMPQlHsxK/XMPh10O5wD5icxo5EHvnPP0ObZ15Ax6T/V
 kcO+NEJCEHH2Q/kna2M6h4FdUVBxvzjjwhdZVs8PGGfJNDij2cVwspT81lKMauwf
 07S0KHEjhqbRSM0TvsMyf2li1Xwv5eu+G2FTkopESJ4a2zyaLobt/QgTu9dzg4Gh
 QDJFx4xdmNv4OQ+psZuoDznjM/EV+eQR+swH7P6UDyef0jghLwVkqHxM/HYChiyP
 OvZCCnHDB4EiC8jx+c43
 =BmiY
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle.

New drivers
* CM3323 color sensor.
* MS5611 pressure and temperature sensor.

New functionality
* mup6050 - create mux clients for devices described via ACPI. The reasoning
     and approach taken in this patch are complex.  Basically there is no
     otherway of finding out what is there than by some esoteric look ups in
     the ACPI data.
* cm3232 - PM support
* itg3200 - suspend/resume support
* mcp320x - add more ADCs to the kconfig to reflect what the driver supports
     (this patch and the bindings got left behind when the support was added
      a while back).

Docs / utils
* ti-adc128s052 - DT bindings.
* mcp3422 - DT bindings.
* mcp320x - DT bindings
* ABI docs for event threshold scale attributes, in_magn_offset, proximity
  scan_element and thresh falling/rising values for accelerometers.  All
  elements long in use that have slipped by being explicitly documented.
* Tidy up the tools previously in drivers/staging/iio/Documentation and move
  them out to /tools/iio. Yet another move that should have happened long ago.
  This time Roberta Dobrescu did the leg work.  Thanks!

Core Cleanups
* Export userspace IIO headers.  We should have done the appropriate header
  splitting a long time ago. Thanks to Daniel for sorting this out.

* Refactor the registring of attributes for buffers to move all non-custom
  ones to a vector allowing easier additions to the current set in the future.

Driver Cleanups
* gpiod related cleanups.  Make use of the additional parameter to specify
  	initial direciton to avoid extra code.
* bmc150 - Various refactorings to reduce code repitition and prepare for
           hardware buffer support.  Some of these cleanups are good even
	   without the new functionality.
* kmx61 - direct use of index to an array avoiding a structure element which
          was always the index to an element in an array of that structure.
* vf610 - avoid incorrect type for return from wait_for_completion_timeout.
* gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
* ade7754 - improve error handling including suppressing some build warnings.
* ade7759 - improve error handling including suppressing some build warnings.
* hmc5843 - Long line and indentation fixes. Also some constifying of various
      constant data.
* ade7854 - 80+ character line splitting.
* ad2s1210 - fix wrong printf format string.
* mxs-lradc - fix wrong printf format string.
* ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
* periodic rtc trigger - make the frequency type an unsigned int as it
  is always treated as such.
* jsa1212 - constify struct regmap_config as it is constant.
* ad7793 - typo in the MODULE_DESCRIPTION
* mma9551 - check gpiod_to_irq errors.  Note that this doesn't actually cause
    any trouble but is worth tidying up as obviously incorrect.
* mlx90614 - refactor the register symbols to make it clear which reads are to
    RAM not PROM.
2015-03-24 22:53:52 +01:00
Tomasz Duszynski c0644160a8 iio: pressure: add support for MS5611 pressure and temperature sensor
Add support for Measurement Specialities MS5611 pressure
and temperature sensor.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-15 11:47:46 +00:00
Daniel Baluta 8b05442637 iio: light: Add support for Capella CM3323 color sensor
Minimal implementation providing raw light intensity
and integration time attribute.

Userspace applications can use GREEN channel for raw
illuminance readings following this table:

Integration Time | G Sensitivity
================================
40 ms            | 0.18
80 ms            | 0.09
160 ms           | 0.045
320 ms           | 0.0225
640 ms           | 0.01125
1280 ms          | 0.005625

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-15 11:43:02 +00:00
Octavian Purdila 7d963215f6 iio: bmc150: introduce bmc150_accel_trigger
Add a separate structure for triggers and add the infrastructure to
support an arbitrary number of triggers. Each trigger is associated
with an interrupt and has an enabled/disabled state.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:56:16 +00:00
Octavian Purdila 3e825ec98d iio: bmc150: introduce bmc150_accel_interrupt
Since both triggers and events can share an interrupt, add a data
structure that tracks the users of an interrupt so that it enables or
disables it only for the first users and respectively last user.

This will allows us to easily add more events or triggers.

The patch also adds an interrupt enabled counter, so that we can
easily know if we need to put the device in normal mode when the
resume callback is issued.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:56:04 +00:00
Martin Fuzzey c1b03ab5e8 iio: core: Fix double free.
When an error occurred during event registration memory was freed twice
resulting in kernel memory corruption and a crash in unrelated code.

The problem was caused by
	iio_device_unregister_eventset()
	iio_device_unregister_sysfs()

being called twice, once on the error path and then
again via iio_dev_release().

Fix this by making these two functions idempotent so they
may be called multiple times.

The problem was observed before applying
	78b33216 iio:core: Handle error when mask type is not separate

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:54:14 +00:00
Adriana Reus af5e1a6831 iio:inv-mpu6050: Fix inconsistency for the scale channel
Fix inconsistency in the semantics of the scale attribute.
For scale the write_raw function was considering the scale table index
and writing the appropriate value into the range register, while
for read_raw it was outputting the actual scale.
Fix this behaviour and adhere to the iio ABI specification.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Viorel Suman <viorel.suman@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:36:21 +00:00
Viorel Suman 4dac0a8eef iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
A hardware fifo reset always imply an invalidation of the
existing timestamps, so we'll clear timestamps fifo on
successfull hardware fifo reset.

Signed-off-by: Viorel Suman <viorel.suman@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 18:36:17 +00:00