Commit Graph

594 Commits

Author SHA1 Message Date
Danny Kukawka 6149dd5cfa [PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c
Adds device ids of two Fujitsu Siemens Tablet PCs to pnp_dev_table

Signed-off-by: Danny Kukawka <dkukawka@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 11:01:22 -07:00
Paul Mundt 0b3d4ef6fe serial: Fix sh-sci break interrupt/sysrq handling.
The sh-sci sci_br_interrupt() handler was failing to call
in to uart_handle_break(), which was something that only
the SH-3 path was doing, fix that up.

Additionally, SUPPORT_SYSRQ seems to have moved down too
far, move it back to the top so uart_handle_break() and
friends aren't no-ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14 13:22:37 +09:00
Pat Gefre f70c81d4dd [PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage
The sn console driver was snagged by the use of CONFIG_DEBUG_SHIRQ!

The request_irq() immediate call to the interrupt handler caused
another attempt to lock the port lock - deadlock.

This is a patch to fix that.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-08 07:39:15 -08:00
Greg Ungerer 28580df03e [PATCH] m68knommu: fix work queues in mcfserial.c driver
Fix work queue code to support new model.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06 18:08:38 -08:00
Greg Ungerer ebfcfef44e [PATCH] m68knommu: set GPIO lines for serial ports on 5282 in mcfserial.c
For the Freescale M5282 ColdFire,
Port UA Pin Assignment Register should set to UART mode.
Patch submitted by David Wu <davidwu@arcturusnetworks.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06 18:08:38 -08:00
Maciej W. Rozycki de320199c0 [PATCH] dz: remove struct pt_regs references
Remove remaining references to saved registers now that
uart_handle_sysrq_char() does not want them.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 07:57:51 -08:00
Linus Torvalds b0138a6cb7 Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits)
  [PARISC] Use symbolic last syscall in __NR_Linux_syscalls
  [PARISC] Add missing statfs64 and fstatfs64 syscalls
  Revert "[PARISC] Optimize TLB flush on SMP systems"
  [PARISC] Compat signal fixes for 64-bit parisc
  [PARISC] Reorder syscalls to match unistd.h
  Revert "[PATCH] make kernel/signal.c:kill_proc_info() static"
  [PARISC] fix sys_rt_sigqueueinfo
  [PARISC] fix section mismatch warnings in harmony sound driver
  [PARISC] do not export get_register/set_register
  [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code
  [PARISC] convert to use CONFIG_64BIT instead of __LP64__
  [PARISC] use CONFIG_64BIT instead of __LP64__
  [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro
  [PARISC] more ENTRY(), ENDPROC(), END() conversions
  [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc
  [PARISC] Fixes /proc/cpuinfo cache output on B160L
  [PARISC] implement standard ENTRY(), END() and ENDPROC()
  [PARISC] kill ENTRY_SYS_CPUS
  [PARISC] clean up debugging printks in smp.c
  [PARISC] factor syscall_restart code out of do_signal
  ...

Fix conflict in include/linux/sched.h due to kill_proc_info() being made
publicly available to PARISC again.
2007-02-26 12:48:06 -08:00
Atsushi Nemoto 0970769ace [SERIAL] serial_txx9 driver update
* Use platform_device.
 * Fix and cleanup suspend/resume/initialization codes.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-22 00:50:45 +00:00
Thomas Koeller cc79aa9d28 [PATCH] 8250: Fix GCC4 signed/unsigned mismatch warning
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:15 -08:00
Linus Torvalds 59b8175c77 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits)
  [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports
  [ARM] 4140/1: AACI stability add ac97 timeout and retries
  [ARM] 4139/1: AACI record support
  [ARM] 4138/1: AACI: multiple channel support for IRQ handling
  [ARM] 4211/1: Provide a defconfig for ns9xxx
  [ARM] 4210/1: base for new machine type "NetSilicon NS9360"
  [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM
  [ARM] 4221/1: S3C2443: DMA support
  [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev
  [ARM] 4219/1: S3C2443: DMA source definitions
  [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443
  [ARM] 4217/1: S3C24XX: remove the dma channel show at startup
  [ARM] 4090/2: avoid clash between PXA and SA1111 defines
  [ARM] 4216/1: add .gitignore entries for ARM specific files
  [ARM] 4214/2: S3C2410: Add Armzone QT2410
  [ARM] 4215/1: s3c2410 usb device:  per-platform vbus_draw
  [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST
  [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos
  [ARM] 4137/1: Add kexec support
  [ARM] 4201/1: SMP barriers pair needed for the secondary boot process
  ...

Fix up conflict due to typedef removal in sound/arm/aaci.h
2007-02-19 13:18:39 -08:00
Linus Torvalds 5c56f46683 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (34 commits)
  [POWERPC] 86xx: Cleaned up platform dts files
  [POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards
  [POWERPC] 85xx: Cleaning up machine probing
  [POWERPC] QE: clean up ucc_slow.c and ucc_fast.c
  [POWERPC] 85xx: Cleaned up platform dts files
  [POWERPC] 83xx: Renamed MPC8323 MDS dts and defconfig to match other boards
  [POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDS
  [POWERPC] 83xx: Use of_platform_bus_probe to setup QE devices
  [POWERPC] 83xx: use default value of loops_per_jiffy
  [POWERPC] 83xx: Remove obsolete setting of ROOT_DEV.
  [POWERPC] 83xx: Cleaning up machine probing and board initcalls
  [POWERPC] Dispose irq mapping when done in mpc52xx_serial.c
  [POWERPC] 86xx: Add missing of_node_put() in mpc86xx_hpcn_init_irq().
  [POWERPC] 8[56]xx: Remove obsolete setting of ROOT_DEV for 85xx and 86xx platforms.
  [POWERPC] pseries: Enabling auto poweron after power is restored.
  [POWERPC] use winbond libata instead of ide driver for pseries CD drives
  [POWERPC] powerpc: remove references to the obsolete linux,platform property
  [POWERPC] add of_get_mac_address and update fsl_soc.c to use it
  [POWERPC] 83xx: Cleaned up 83xx platform dts files
  [POWERPC] Fix bug with early ioremap and 64k pages
  ...
2007-02-19 13:05:14 -08:00
Russell King f69eda00d4 Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale trees 2007-02-17 20:09:53 +00:00
Sylvain Munaut fc7900bb04 [POWERPC] Dispose irq mapping when done in mpc52xx_serial.c
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-17 18:20:18 +11:00
Kyle McMartin e7b3ca0854 Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git
Conflicts:

	arch/parisc/hpux/sys_hpux.c
	arch/parisc/mm/ioremap.c
2007-02-17 00:18:23 -05:00
Sergei Organov bb289bc46f serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.
Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.

Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:16 -08:00
Paul Gortmaker 0f9ec0a828 [POWERPC] Fix compile failure in cpm_uart_cpm2
Fix bug that exists in kernel.org since 2.6.17rc4 - compiles fail if
CONFIG_SERIAL_CPM_SMC is defined.  Tested on a board using SMC1 console.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-16 14:00:19 +11:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Vitaly Wool de8211b96b [PATCH] PNX8550 UART driver
Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Burman Yan 8f31bb39ec [PATCH] serial: replace kmalloc+memset with kzalloc
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
George G. Davis 3689a0ec60 [PATCH] serial: make sure UART is powered up when dumping MCTRL status
Since serial devices are powered down when not in use and some of those
devices cannot be accessed when powered down, we need to enable power
around calls to get_mcrtl() when dumping port state via uart_line_info().
This resolves hangs observed on some machines while reading serial device
registers when a port is powered off.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Bjorn Helgaas 9b22271d4b [PATCH] serial: trivial code flow simplification
Return failure immediately, so we don't have to test it twice.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Alex Williamson 40b36daad0 [PATCH] 8250 UART backup timer
The patch below works around a minor bug found in the UART of the remote
management card used in many HP ia64 and parisc servers (aka the Diva
UARTs).  The problem is that the UART does not reassert the THRE interrupt
if it has been previously cleared and the IIR THRI bit is re-enabled.  This
can produce a very annoying failure mode when used as a serial console,
allowing a boot/reboot to hang indefinitely until an RX interrupt kicks it
into working again (ie.  an unattended reboot could stall).

To solve this problem, a backup timer is introduced that runs alongside the
standard interrupt driven mechanism.  This timer wakes up periodically,
checks for a hang condition and gets characters moving again.  This backup
mechanism is only enabled if the UART is detected as having this problem,
so systems without these UARTs will have no additional overhead.

This version of the patch incorporates previous comments from Pavel and
removes races in the bug detection code.  The test is now done before the
irq linking to prevent races with interrupt handler clearing the THRE
interrupt.  Short delays and syncs are also added to ensure the device is
able to update register state before the result is tested.

Aristeu says:

  this was tested on the following HP machines and solved the problem:
  rx2600, rx2620, rx1600 and rx1620s.

hpa says:

  I have seen this same bug in soft UART IP from "a major vendor."

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Arnd Bergmann 8d38a5b2fa [POWERPC] Open Firmware serial port driver
This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:04 +11:00
Grant Likely e3aba81d15 [POWERPC] Fixup mp5200 drivers to match device tree changes
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Haavard Skinnemoen 544fc7283c [PATCH] atmel_serial: Use __raw I/O register access
Access to chip-internal registers should always be native-endian.  This is
especially important for AVR32 since it's a big-endian architecture and the
non-raw readl() and writel() macros are defined to do little-endian
accesses.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:29 -08:00
Matthias Fuchs a9cccd3437 [PATCH] serial: support for new board
Add support for the CPCI-ASIO4 quad port CompactPCI UART board from
electronic system design gmbh.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:33 -08:00
Thomas Hoehn 482120084d [PATCH] Perle multimodem card (PCI-RAS) detection
Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver.  It
may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for
testing.

Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:33 -08:00
Atsushi Nemoto 138c5d258c [PATCH] serial: serial_txx9 driver update
Update the serial_txx9 driver.

 * Configurable manumum port number. (SERIAL_TXX9_NR_UARTS)
 * Remove some code which is unneeded if CONFIG_PM=n.
 * Use PCI_DEVICE() for pci device id table and make it const.
 * Do not include <asm/irq.h>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:27 -08:00
Jiri Slaby b963a8441c [PATCH] Char: tty_wakeup cleanup
tty_wakeup cleanup

- remove wake_up_interruptible(&tty->write_wait) surrounding
  tty_wakup(tty);
- substitute tty->ldisc.write_wakeup(tty) + wake_up() by tty_wakeup(tty);

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:26 -08:00
Brent Casavant 52c9ae0ac7 [PATCH] IOC3/IOC4: PCI mem space resources
The SGI IOC3 and IOC4 PCI devices implement memory space apertures, not I/O
space apertures.  Use the appropriate region management functions.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Stanislaw Skowronek <skylark@linux-mips.org>
Cc: Brent Casavant <bcasavan@sgi.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:25 -08:00
Lennert Buytenhek 00584719b5 [ARM] amba-pl010: add reference to ep93xx to Kconfig help entry
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:46:26 +00:00
Pavel Pisa d7ea10d9cb [ARM] i.MX serial: fix IRQ allocation
If RTS interrupt is caused by RTS senzing logic inside i.MX UART module the
IRQ type cannot be set.

It applies only for interrupts going through GPIO layer.  The problem has
been noticed by Konstantin Kletschke some time ago.

  No IRQF_TRIGGER set_type function for IRQ 26 (MPU)

I would not change type to fixed 0, because it could be possible to use
different GPIO MX1 pin for RTS in the theory.  On the other hand it is only
for documentation purposes now, because RTS read code would have to be
adjusted in such case.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:46:23 +00:00
Sascha Hauer 8c0b254b7e [ARM] i.MX serial: fix tx buffer overflows
Fix occasional tx buffer overflows in the i.MX serial driver which came
from the fact that space in the buffer was checked after sending the first
byte.  Also, fifosize is 32 bytes, not 8.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:46:19 +00:00
Al Viro b81831c69a [PATCH] drivers/serial NULL noise removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:06 -08:00
Andrew Victor 93a3ddc201 [ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.h
The Atmel AT91 and AVR32 processor architectures share many of the same
peripherals.  The PDC (Peripheral Data Controller) registers are also
implemented within in a number of the on-chip peripherals (eg, USART,
MMC, SPI, SSC, etc).

In a attempt not to duplicate the register definitions in each
peripheral, or in each architecture, the at91_pdc.h header in
asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with
linux/atmel_pdc.h.

The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*,
and the drivers updated accordingly.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 15:13:47 +00:00
Paul Mackerras 8423200553 Merge branch 'linux-2.6' 2007-02-07 14:05:13 +11:00
Vitaly Bordug 5427828e83 [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:

- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
  initial commit,
- new solely-powerpc header file for 8260 family (was using one from
  arch/ppc, this one cleaned up from the extra stuff), in fact for now
  a placeholder to get the board-specific includes for stuff not yet
  capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug f25222b995 [POWERPC] cpm_uart: OF-related fix for CPM1
This makes cpm uart able to work using OF-passed parameters
in case of CPM stuff (found on most mpc8xx reference and custom
boards). The idea is to keep ppc stuff working yet making it able to be
used for powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 12:00:32 +11:00
Russell King d28122a587 [ARM] Fix AMBA serial drivers for non-first serial ports
Using console=ttyAM1 or console=ttyAMA1 resulted in an oops during
boot due to trying to drive the console before that port had been
registered.  Fix this by checking whether the port is present before
allowing console setup to proceed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-24 11:59:57 +00:00
Andrew Victor 9b93816690 [ARM] 4088/1: AT91: Unbalanced IRQ in serial driver suspend/resume
This patch fixes the unbalanced calls to enable_irq_wake() and
disable_irq_wake() in the AT91 (and AVR32) serial driver.

It should resolve these kernel messages:
  Unbalanced IRQ x wake disable
  BUG: warning at kernel/irq/manage.c:167/set_irq_wake()

Original patch from Marc Pignat.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-24 11:59:55 +00:00
Andrew Victor a14d527306 [ARM] 4086/1: AT91: Whitespace cleanup
A couple of whitespace cleanups, mainly in the AT91 header files.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-24 11:59:55 +00:00
Vivek Goyal 118c0ace1b [PATCH] x86-64: modpost add more symbols to whitelist pattern2
o MODPOST generates warning for i386 if compiled with CONFIG_RELOCATABLE=y
  and serial console support is enabled.

o Serial console setup function, serial8250_console_setup(), is a non __init
  function and it calls functions which are of type __init().
  (uart_parse_options() and uart_set_options()). Assuming, setup will
  be called during init time, changing serial8250_console_setup() to __init.

o Adding one more pattern to modpost whitelist. Console drivers might
  have *_console structures containing references to setup functions which
  can be of __init type. Don't generate warnings for those.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'serial8250_console' (at offset 0xc05a33d8) and 'serial8250_reg'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-01-11 01:52:44 +01:00
Grant Likely c98750c2eb [POWERPC] Fix mpc52xx serial driver to work for arch/ppc again
The mpc52xx_uart_of_enumerate() function was added when adding 52xx
support to arch/powerpc, but it must not be called for arch/ppc.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-09 17:03:02 +11:00
David S. Miller e3a411a3df [SPARC64]: Fix of_iounmap() region release.
We need to pass in the resource otherwise we cannot
release the region properly.  We must know whether it is
an I/O or MEM resource.

Spotted by Eric Brower.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-31 14:06:05 -08:00
Peter Korsgaard e21654a756 [PATCH] serial/uartlite: Only enable port if request_port succeeded
The uartlite driver used to always enable the port even if request_port
failed causing havoc. This patch fixes it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 09:58:48 -08:00
Russell King 1fb8cacc19 [PATCH] Add support for Korenix 16C950-based PCI cards
This adds initial support to 8250-pci for the Korenix Jetcard PCI serial
cards.  The JC12xx cards are standard RS232-based serial cards utilising
the Oxford 16C950 device.

The JC14xx are RS422/RS485-based cards, but in order for these to be
supported natively, we will need additional tweaks to the 8250 layers so
we can specify some values for the 950's registers.  Hence, these two
entries are commented out.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:18:11 -08:00
Linus Torvalds 775ba7ad49 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Fix inotify maintainers entry
  Fix typo in new debug options.
  Jon needs a new shift key.
  fs: Convert kmalloc() + memset() to kzalloc() in fs/.
  configfs.h: Remove dead macro definitions.
  kconfig: Standardize "depends" -> "depends on" in Kconfig files
  e100: replace kmalloc with kcalloc
  um: replace kmalloc+memset with kzalloc
  fix typo in net/ipv4/ip_fragment.c
  include/linux/compiler.h: reject gcc 3 < gcc 3.2
  Kconfig: fix spelling error in config KALLSYMS help text
  Remove duplicate "have to" in comment
  Fix small typo in drivers/serial/icom.c
  Use consistent casing in help message
  EXT{2,3,4}_FS: remove outdated part of the help text
2006-12-12 18:51:51 -08:00
Robert P. J. Day bef1f40261 kconfig: Standardize "depends" -> "depends on" in Kconfig files
Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 20:04:19 +01:00
Thomas Hisch 87c18aa951 Fix small typo in drivers/serial/icom.c
Signed-off-by: Thomas Hisch <t.hisch@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 19:20:35 +01:00
Paul Mundt 41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00