We can't just map any randome page we get when memory encryption is
active.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.kernel.org/patch/10850833/
Sometimes it is desirabled to use a separate i2c controller for ddc
access. This adds support for the ddc-i2c-bus property of the
hdmi-connector node, using the specified controller if provided.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328130249.19356-1-mans@mansr.com
The RK3066 HDMI TX serves as interface between a LCD Controller and
a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and
one HDMI transmitter PHY. The interface has three (3) 8-bit data channels
which can be configured for a number of bus widths (8/10/12/16/20/24-bit)
and different video formats (RGB, YCbCr).
Features:
HDMI version 1.4a, HDCP revision 1.4 and
DVI version 1.0 compliant transmitter.
Supports DTV resolutions from 480i to 1080i/p HD.
Master I2C interface for a DDC connection.
HDMI TX supports multiple power save modes.
The HDMI TX input can switch between LCDC0 and LCDC1.
(Sound support is not included in this patch)
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-2-jbx6244@gmail.com
Splits out the dither register bits and introduces
the same config enumerations as in the rockchip kernel tree.
Tested to fix the banding on my ASUS C201.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318154412.26994-1-urjaman@gmail.com
UAPI Changes:
- Make mmap code more asynchronous. Avoid full SET_DOMAIN on GTT mmap pagefault,
and flushes pages on acquisition instead. Moves some of the work from mmap fault
time to execbuf time to avoid lock contention during mmap access.
Has neutral to positive impact on perf as the flushing moves to execbuf time
in real world workloads on the current known userspaces due to recycling of BOs.
If there exist an unknown non-recycling userspace, they should explicitly do the
SET_DOMAIN and not rely on kernel doing implicit SET_DOMAIN because swapout/in
might have happenedt.
- Restore the accidentally removed behaviour of returning object size on GEM_CREATE
From 2011: ff72145bad ("drm: dumb scanout create/mmap for intel/radeon (v3)")
- Includes a some neutered patches to prepare to complete the earlier Mesa
recovery feature uAPI. Looking to enable this in the next PR.
Driver Changes:
- Add Elkhartlake (Gen11) support code and PCI IDs
- Add missing Amberlake PCI ID 0x87CA (Ville)
- Fix to Bugzilla #109780: Pick the first mode from EDID as the fixed mode when there is no preferred mode (Ville)
- Fix GCC 4.8 build by using __is_constexpr() (Chris, Randy, Uma)
- Add "Broadcast RGB", "force_audio" and "max_bpc" properties to DP MST (Ville)
- Remove 8bpc limitation from DP MST (Ville)
- Fix changing between limited and full range RGB output in DP fastsets (Ville)
- Reject unsupported HDR formats (Maarten)
- Handle YUV subpixel support better (Maarten)
- Various plane watermarks fixes and cleaning of the code (Ville)
- Icelake port sync master select fix (Manasi)
- Icelake VEBOX disable bitmask fix (Jose)
- Close a race where userspace could see incompletely initialized GEM context (Chris)
- Avoid C3 on i945gm to keep vblank interrupts steady (Ville)
- Avoid recalculating PLL HW readout each time (Lucas)
- A ton of patches to modularize uncore code (Daniel)
- Instead of storing media fuse value, immediately derive engine masks (Daniele)
- Reduce struct_mutex usage (Chris)
- Iterate over child devices to initialize ddi_port_info (Jani)
- Fixes to return correct error values when bailing out of functions (Dan)
- Use bitmap_zalloc() (Andy)
- Reorder and clarify Gen3/4 code (Ville)
- Refactor out common code in display mode handling (Ville)
- GuC code fixes (Sujaritha, Michal)
- Selftest improvements (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328151515.GA9606@jlahtine-desk.ger.corp.intel.com
This patch moves the virtio_gpu_cmd_create_resource() call (which
notifies the host about the new resource created) into the
virtio_gpu_object_create() function. That way we can call
virtio_gpu_cmd_create_resource() before ttm_bo_init(), so the host
already knows about the object when ttm initializes the object and calls
our driver callbacks.
Specifically the object is already created when the
virtio_gpu_ttm_tt_bind() callback invokes virtio_gpu_object_attach(),
so the extra virtio_gpu_object_attach() calls done after
virtio_gpu_object_create() are not needed any more.
The fence support for the create ioctl becomes a bit more tricky though.
The code moved into virtio_gpu_object_create() too. We first submit the
(fenced) virtio_gpu_cmd_create_resource() command, then initialize the
ttm object, and finally attach just created object to the fence for the
command in case it didn't finish yet.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-6-kraxel@redhat.com
Add format, width and height fields to the virtio_gpu_object_params
struct. With that in place we can use the parameter struct for
virtio_gpu_cmd_create_resource() calls too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-4-kraxel@redhat.com
Create virtio_gpu_object_params, use that to pass object parameters to
virtio_gpu_object_create. This is just the first step, followup patches
will add more parameters to the struct. The plan is to use the struct
for all object parameters.
Drop unused "kernel" parameter for virtio_gpu_alloc_object(), it is
unused and always false.
Also drop "pinned" parameter. virtio-gpu doesn't shuffle around
objects, so effecively they all are pinned anyway. Hardcode
TTM_PL_FLAG_NO_EVICT so ttm knows. Doesn't change much for the moment
as virtio-gpu supports TTM_PL_FLAG_TT only so there is no opportunity to
move around objects. That'll probably change in the future though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-3-kraxel@redhat.com
Drop the dummy ttm backend implementation, add a real one for
TTM_PL_FLAG_TT objects. The bin/unbind callbacks will call
virtio_gpu_object_{attach,detach}, to update the object state
on the host side, instead of invoking those calls from the
move_notify() callback.
With that in place the move and move_notify callbacks are not
needed any more, so drop them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190318113332.10900-2-kraxel@redhat.com
This file prints which features the virtio-gpu device has.
Also add "virtio-gpu-" prefix to the existing fence file,
to make clear this is a driver-specific debugfs file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190320083612.32067-1-kraxel@redhat.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_init_mem_type':
drivers/gpu/drm/virtio/virtgpu_ttm.c:117:28: warning:
variable 'vgdev' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/virtio/virtgpu_ttm.c: In function 'virtio_gpu_bo_swap_notify':
drivers/gpu/drm/virtio/virtgpu_ttm.c:300:28: warning:
variable 'vgdev' set but not used [-Wunused-but-set-variable]
It is never used since introduction in dc5698e80c ("Add virtio gpu driver.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190325092631.152060-1-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On the D3 SoC the LVDS PHY must be enabled in the same register write
that enables the LVDS output. Skip writing the LVEN bit independently
on that platform, it will be set by the write that sets LVRES.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The D3 and E3 SoCs have different pixel clock frequency limits for the
LVDS encoder than the other SoCs in the Gen3 family. Adjust the mode
fixup implementation accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
The rcar_du_crtc functions have a heavy reliance on the rcar_du_group
structure, in many cases just to access the DU device context.
To better separate the groups out of the CRTC handling code, give the
rcar_du_crtc its own pointer to the device and remove the indirection
through the group pointers.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The PLL parameters are computed by looping over the range of acceptable
M, N and E values, and selecting the combination that produces the
output frequency closest to the target. The internal frequency
constraints are taken into account by restricting the tested values for
the PLL parameters, reducing the search space. The target frequency,
however, is only taken into account when computing the post-PLL divider,
which can result in a 0 value for the divider when the PLL output
frequency being tested is lower than half of the target frequency.
Subsequent loops will produce a better set of PLL parameters, but for
some of the iterations this can result in a division by 0.
Fix it by clamping the divider value. We could instead restrict the E
values being tested in the inner loop, but that would require additional
calculation that would likely be less efficient as the E parameter can
only take three different values.
Fixes: c25c013611 ("drm: rcar-du: lvds: D3/E3 support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
drm_framebuffer.h makes use of a pointer to struct drm_format_info but
doesn't include drm_fourcc.h (neither directly nor indirectly).
Forward-declare the structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
The CRTC suspend and resume functions have been replaced, but the
prototypes were not removed.
Remove the redundant definitions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_crtc_mode_valid() and rcar_du_crtc_get_crc_sources()
functions are accessed only through a function pointer table.
Convert the function definitions to be static to the module.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The drm_crtc_state documentation contains a subtle misspelling of the
word subtle. Correct it.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car DU driver assumes that a bridge is always connected to the DU
output. This is valid for the LVDS and HDMI outputs, but the DPAD
outputs can be connected directly to a panel, in which case no bridge is
available.
To support this use case, detect whether the entities connected to the
DU DPAD outputs are encoders or panels based on the number of ports of
their DT node, and retrieve the corresponding type of DRM objects. For
panels, additionally create panel bridge instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kevin Key <kevin.key@gentex.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
No need to update current profile mode if the new profile mode
does not take effect in fact.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently only top pipe gets output tf programmed. This change
makes all odm head pipes get output tf programmed.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a functions to return swizzle types for dml
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pass SDP splitting when setting stream attributes for future use
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create dccg_init and init_clocks for future use
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
set_display_requirement, dcn1_pplib_apply_display_requirements
are no longer used and should be removed.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The resource constructor currently needs num_virtual_links from
init_data but will need access to other items provided by DM.
[HOW]
Pass init_data into DCN create_resource_pool functions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When you have a SST branch device the driver, Even no sink device connected,
it also send HPD with a valid EDID. Driver will config it to DP sink.
Therefore, there're two displays in display setting.
DPCD 0x05, DFP_PRESENT = 1 (branch device),
DFP_TYPE = 00 (Display Port)
[How]
Driver determine DPCD 0x05 DFP_PRESENT = 1(branch) as an active dongle
And check DFP count.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
program default output gamma if no user specific gamma
parameters passed.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
existing logic finds "first free pipe from 5 -> 0" to split
this will cause certain sequences to require DC to move
an MPCC from one tree to another, which is unsupported
this leads to blackscreen
to mitigate this problem, we will always try to acquire the
"preferred" pipe, and each pipe has a unique preferred pipe
this means we avoid most of the scenarios where
pipe splitting leads to moving MPCC from one tree
to another
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of skipping the root PD while processing the relocated list just never
put it on the list in the first place.
This avoids walking the list all together when the root PD is the only entry
and so also avoids trying to submit a zero sized IB to the SDMA.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is redundant with the job pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König
Mans Rullgard
Yannick Fertré
Zheng Yang
Johan Jonker
Urja Rannikko
Dave Airlie
Alex Deucher
Joonas Lahtinen
Gerd Hoffmann
YueHaibing
Laurent Pinchart
Kieran Bingham
Evan Quan
Dmytro Laktyushkin
Joshua Aberback
Eric Bernstein
Aric Cyr
Nikola Cornij
Eryk Brol
Fatemeh Darbehani
Harry Wentland
Hugo Hu
hersen wu
Jun Lei