Commit Graph

347 Commits

Author SHA1 Message Date
Phoebe Buckheister e6278d9200 mac802154: use header operations to create/parse headers
Use the operations on 802.15.4 header structs introduced in a previous
patch to create and parse all headers in the mac802154 stack. This patch
reduces code duplication between different parts of the mac802154 stack
that needed information from headers, and also fixes a few bugs that
seem to have gone unnoticed until now:

 * 802.15.4 dgram sockets would return a slightly incorrect value for
   the SIOCINQ ioctl
 * mac802154 would not drop frames with the "security enabled" bit set,
   even though it does not support security, in violation of the
   standard

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:15:26 -04:00
Phoebe Buckheister 94b4f6c21c ieee802154: add header structs with endiannes and operations
This patch provides a set of structures to represent 802.15.4 MAC
headers, and a set of operations to push/pull/peek these structs from
skbs. We cannot simply pointer-cast the skb MAC header pointer to these
structs, because 802.15.4 headers are wildly variable - depending on the
first three bytes, virtually all other fields of the header may be
present or not, and be present with different lengths.

The new header creation/parsing routines also support 802.15.4 security
headers, which are currently not supported by the mac802154
implementation of the protocol.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:15:26 -04:00
Phoebe Buckheister b70ab2e87f ieee802154: enforce consistent endianness in the 802.15.4 stack
Enable sparse warnings about endianness, replace the remaining fields
regarding network operations without explicit endianness annotations
with such that are annotated, and propagate this through the entire
stack.

Uses of ieee802154_addr_sa are not changed yet, this patch is only
concerned with all other fields (such as address filters, operation
parameters and the likes).

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:15:26 -04:00
Phoebe Buckheister 376b7bd355 ieee802154: rename struct ieee802154_addr to *_sa
The struct as currently defined uses host byte order for some fields,
and most big endian/EUI display byte order for other fields. Inside the
stack, endianness should ideally match network byte order where possible
to minimize the number of byteswaps done in critical paths, but this
patch does not address this; it is only preparatory.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:15:25 -04:00
Florian Westphal 177943260a 6lowpan: reassembly: un-export local functions
most of these are only used locally, make them static.
fold lowpan_expire_frag_queue into its caller, its small enough.

Cc: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13 16:10:11 -04:00
Joe Perches ec633eb5ff ieee802154: Convert uses of __constant_<foo> to <foo>
The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:28:06 -04:00
Alexander Aring 3772ab1d37 6lowpan: reassembly: fix access of ctl table entry
Correct offset is 3 of the 6lowpanfrag_max_datagram_size value in proc
entry ctl table and not 2.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-10 16:03:03 -04:00
Alexander Aring 37147652cf 6lowpan: reassembly: fix return of init function
This patch adds a missing return after fragmentation init. Otherwise we
register a sysctl interface and deregister it afterwards which makes no
sense.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-07 17:11:19 -05:00
Alexander Aring cefc8c8a7c 6lowpan: move 6lowpan header to include/net
This header is used by bluetooth and ieee802154 branch. This patch
move this header to the include/net directory to avoid a use of a
relative path in include.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06 17:21:38 -05:00
Alexander Aring 91c6922745 6lowpan: add missing include of net/ipv6.h
The 6lowpan.h file contains some static inline function which use
internal ipv6 api structs. Add a include of ipv6.h to be sure that it's
known before.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06 17:21:38 -05:00
Alexander Aring 6092c79fd0 ieee802154: fix whitespace issues in Kconfig
This patch fixes some whitespace issues in Kconfig files of IEEE
802.15.4 subsytem.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04 20:12:44 -05:00
Alexander Aring b6f82fc05d 6lowpan: use memcpy to set tag value in fraghdr
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02 19:19:44 -05:00
Alexander Aring 0234a63248 6lowpan: remove initialization of tag value
The initialization of the tag value doesn't matter at begin of
fragmentation. This patch removes the initialization to zero.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02 19:19:44 -05:00
Alexander Aring 4c7f778e56 6lowpan: fix type of datagram size parameter
Datagram size value is u16 because we convert it to host byte order
and we need to read it. Only the tag value belongs to __be16 type.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02 19:19:44 -05:00
Alexander Aring 7240cdec60 6lowpan: handling 6lowpan fragmentation via inet_frag api
This patch drops the current way of 6lowpan fragmentation on receiving
side and replace it with a implementation which use the inet_frag api.
The old fragmentation handling has some race conditions and isn't
rfc4944 compatible. Also adding support to match fragments on
destination address, source address, tag value and datagram_size
which is missing in the current implementation.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 17:05:22 -05:00
Alexander Aring d57fec84fb 6lowpan: fix some checkpatch issues
Detected with:

./scripts/checkpatch.pl --strict -f net/ieee802154/6lowpan_rtnl.c

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 17:05:22 -05:00
Alexander Aring 01348b3448 6lowpan: move 6lowpan.c to 6lowpan_rtnl.c
We have a 6lowpan.c file and 6lowpan.ko file. To avoid confusing we
should move 6lowpan.c to 6lowpan_rtnl.c. Then we can support multiple
source files for 6lowpan module.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 17:05:21 -05:00
Alexander Aring 02600d0de6 6lowpan: change tag type to __be16
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 17:05:21 -05:00
Alexander Aring 96cb3eb7a1 6lowpan: fix fragmentation on sending side
This patch fix the fragmentation on sending side according to rfc4944.

Also add improvement to use the full payload of a PDU which calculate
the nearest divided to 8 payload length for the fragmentation datagram
size attribute.

The main issue is that the datagram size of fragmentation header use the
ipv6 payload length, but rfc4944 says it's the ipv6 payload length inclusive
network header size (and transport header size if compressed).

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 17:05:21 -05:00
Alexander Aring 349aa7bc29 6lowpan: add uncompress header size function
This patch add a lookup function for uncompressed 6LoWPAN header
size. This is needed to estimate the real size after uncompress the
6LoWPAN header.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 17:05:21 -05:00
Phoebe Buckheister 1c8272bd18 ieee802154: fix faulty check in set_phy_params api
phy_set_csma_params has a redundant (and impossible) check for
"retries", found by smatch. The check was supposed to be for
frame_retries, but wasn't moved during development when
phy_set_frame_retries was introduced. Also, maxBE >= 3 as required by
the standard is not enforced.

Remove the redundant check, assure max_be >= 3 and check -1 <=
frame_retries <= 7 in the correct function.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 18:11:05 -05:00
Phoebe Buckheister 4244db1b0b ieee802154: add netlink APIs for smartMAC configuration
Introduce new netlink attributes for SET_PHY_ATTRS:
 * CSMA minimal backoff exponent
 * CSMA maximal backoff exponent
 * CSMA retry limit
 * frame retransmission limit

The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of
802.15.4, respectively. The frame retransmission shall correspond to
maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour
of the stack shall apply. For RF2xy, the old behaviour is to not do
channel sensing at all and simply send *right now*, which is not
intended behaviour for most applications and actually prohibited for
some channel/page combinations.

For all values except frame retransmission limit, the defaults of
802.15.4 apply. Frame retransmission limits are set to -1 to indicate
backward-compatible behaviour.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 16:42:39 -05:00
Phoebe Buckheister 6ca001978d ieee802154: add support for setting CCA energy detection levels
Since three of the four clear channel assesment modes make use of energy
detection, provide an API to set the energy detection threshold.
Driver support for this is available in at86rf230 for the RF212 chips.
Since for these chips the minimal energy detection threshold depends on
page and channel used, add a field to struct at86rf230_local that stores
the minimal threshold. Actual ED thresholds are configured as offsets
from this value.

For RF212, setting the ED threshold will not work before a channel/page
has been set due to the dependency of energy detection in the chip and
the actual channel/page selected.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 16:42:38 -05:00
Phoebe Buckheister ba08fea53a ieee802154: add support for CCA mode in wpan phys
The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Support for CCA mode setting is included in the at86rf230 driver,
predicated for RF212 chips.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 16:42:38 -05:00
Phoebe Buckheister 84dda3c648 ieee802154: add support for listen-before-talk in wpan_phy
Listen-before-talk is an alternative to CSMA in uncoordinated networks
and prescribed by european regulations if one wants to have a device
with radio duty cycles above 10% (or less in some bands). Add a phy
property to enable/disable LBT in the phy, including support in the
at86rf230 driver for RF212 chips.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 16:42:38 -05:00
Phoebe Buckheister 9b2777d608 ieee802154: add TX power control to wpan_phy
Replace the current u8 transmit_power in wpan_phy with s8 transmit_power.
The u8 field contained the actual tx power and a tolerance field,
which no physical radio every used. Adjust sysfs entries to keep
compatibility with userspace, give tolerances of +-1dB statically there.

This patch only adds support for this in the at86rf230 driver and the
RF212 chip. Configuration calculation for RF212 is also somewhat basic,
but does the job - the RF212 datasheet gives a large table with
suggested values for combinations of TX power and page/channel, if this
does not work well, we might have to copy the whole table.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17 16:42:38 -05:00
Eric Dumazet 20e7c4e80d 6lowpan: fix lockdep splats
When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.

Same issue was fixed for bonding/l2tp/ppp in commits

0daa230302 ("[PATCH] bonding: lockdep annotation")
49ee49202b ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat")
23d3b8bfb8 ("net: qdisc busylock needs lockdep annotations ")
303c07db48 ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ")

Reported-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 17:51:29 -08:00
Christian Engelmayer 310f6fd0ca 6lowpan: Remove unused pointer in lowpan_header_create()
Commit 8df8c56a (6lowpan: Moving generic compression code into 6lowpan_iphc.c)
left pointer 'hdr' unused - remove it.

Detected by Coverity: CID 1164868.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 18:38:10 -08:00
Stephen Rothwell ce60e0c4df net: 6lowpan: fixup for code movement
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27 16:43:03 -08:00
Yann Droneaud 5ae5e991ee 6lowpan: add a license to 6lowpan_iphc module
Since commit 8df8c56a5a, 6lowpan_iphc is a module of its own.

Unfortunately, it lacks some infrastructure to behave like a
good kernel citizen:

  kernel: 6lowpan_iphc: module license 'unspecified' taints kernel.
  kernel: Disabling lock debugging due to kernel taint

This patch adds the basic MODULE_LICENSE(); with GPL license:
the code was copied from net/ieee802154/6lowpan.c which is GPL
and the module exports symbol with EXPORT_SYMBOL_GPL();.

Cc: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:57:17 -08:00
Steffen Hurrle 342dfc306f net: add build-time checks for msg->msg_name size
This is a follow-up patch to f3d3342602 ("net: rework recvmsg
handler msg_name and msg_namelen logic").

DECLARE_SOCKADDR validates that the structure we use for writing the
name information to is not larger than the buffer which is reserved
for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR
consistently in sendmsg code paths.

Signed-off-by: Steffen Hurrle <steffen@hurrle.net>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18 23:04:16 -08:00
David S. Miller 4180442058 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
	net/ipv4/tcp_metrics.c

Overlapping changes between the "don't create two tcp metrics objects
with the same key" race fix in net and the addition of the destination
address in the lookup key in net-next.

Minor overlapping changes in bnx2x driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18 00:55:41 -08:00
Dmitry Eremin-Solenikov a53d34c346 net: move 6lowpan compression code to separate module
IEEE 802.15.4 and Bluetooth networking stacks share 6lowpan compression
code. Instead of introducing Makefile/Kconfig hacks, build this code as
a separate module referenced from both ieee802154 and bluetooth modules.

This fixes the following build error observed in some kernel
configurations:

net/built-in.o: In function `header_create': 6lowpan.c:(.text+0x166149): undefined reference to `lowpan_header_compress'
net/built-in.o: In function `bt_6lowpan_recv': (.text+0x166b3c): undefined reference to `lowpan_process_data'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 15:36:38 -08:00
Christian Engelmayer 267d29a69c ieee802154: Fix memory leak in ieee802154_add_iface()
Fix a memory leak in the ieee802154_add_iface() error handling path.
Detected by Coverity: CID 710490.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14 15:40:56 -08:00
John W. Linville 235f939228 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	net/ieee802154/6lowpan.c
2014-01-10 10:59:40 -05:00
David S. Miller 56a4342dfe Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
	net/ipv6/ip6_tunnel.c
	net/ipv6/ip6_vti.c

ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.

qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 17:37:45 -05:00
Daniel Borkmann 965801e1eb net: 6lowpan: fix lowpan_header_create non-compression memcpy call
In function lowpan_header_create(), we invoke the following code
construct:

  struct ipv6hdr *hdr;
  ...
  hdr = ipv6_hdr(skb);
  ...
  if (...)
    memcpy(hc06_ptr + 1, &hdr->flow_lbl[1], 2);
  else
    memcpy(hc06_ptr, &hdr, 4);

Where the else path of the condition, that is, non-compression
path, calls memcpy() with a pointer to struct ipv6hdr *hdr as
source, thus two levels of indirection. This cannot be correct,
and likely only one level of pointer was intended as source
buffer for memcpy() here.

Fixes: 44331fe2aa ("IEEE802.15.4: 6LoWPAN basic support")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 20:25:24 -05:00
Weilong Chen 3193502e5b ieee802154: space prohibited before that close parenthesis
Fix checkpatch error with space.

Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-27 13:06:16 -05:00
Alexander Aring c567c77101 6lowpan: cleanup udp compress function
This patch remove unnecessary casts and brackets in compress_udp_header
function.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:48 -08:00
Alexander Aring 45939d2570 6lowpan: udp use subtraction on both conditions
Cleanup code to handle both calculation in the same way.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:48 -08:00
Alexander Aring 1672a36b73 6lowpan: udp use lowpan_fetch_skb function
Cleanup the lowpan_uncompress_udp_header function to use the
lowpan_fetch_skb function.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:48 -08:00
Alexander Aring 573701ce37 6lowpan: add udp warning for elided checksum
Bit 5 of "UDP LOWPAN_NHC Format" indicate that the checksum can be
elided.
The host need to calculate the udp checksum afterwards but this isn't
supported right now.

See:
http://tools.ietf.org/html/rfc6282#section-4.3.3
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:48 -08:00
Alexander Aring e5d966eff3 6lowpan: fix udp byte ordering
The incoming udp header in lowpan_compress_udp_header function is
already in network byte order.

Everytime we read this values for source and destination port we need
to convert this value to host byte order.

In the outcoming header we need to set this value in network byte order
which the upcoming process assumes.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:48 -08:00
Alexander Aring 95277eb1cd 6lowpan: fix udp compress ordering
In case ((ntohs(uh->source) & LOWPAN_NHC_UDP_8BIT_MASK) the order of
uncompression is wrong. It's always first source port then destination
port as second.

See:
http://tools.ietf.org/html/rfc6282#section-4.3.3

"Fields carried in-line (in part or in whole) appear in the same order
as they do in the UDP header format"

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:47 -08:00
Alexander Aring 5cede84c98 6lowpan: udp use lowpan_push_hc_data function
This patch uses the lowpan_push_hc_data to generate iphc header.

The current implementation has some wrong pointer arithmetic issues and
works in a random case only.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:47 -08:00
Alexander Aring 3109f2e28b 6lowpan: introduce lowpan_push_hc_data function
This patch introduce the lowpan_push_hc_data function to set data in
the iphc buffer.

It's a common case to set data and increase the buffer pointer. This
helper function can be used many times in header_compress function to
generate the iphc header.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-17 06:16:47 -08:00
Alexander Aring 841a5ec72c 6lowpan: fix/move/cleanup debug functions
There are several issues on current debug behaviour.
This patch fix the following issues:

- Fix debug printout only if DEBUG is defined.
- Move debug functions of 6LoWPAN code into 6lowpan header.
- Cleanup codestyle of debug functions.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-12 12:14:54 -08:00
Jukka Rissanen 8df8c56a5a 6lowpan: Moving generic compression code into 6lowpan_iphc.c
Because the IEEE 802154 and Bluetooth share the IP header compression
and uncompression code, the common code is moved to 6lowpan_iphc.c
file.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-11 12:57:54 -08:00
Johannes Berg 2a94fe48f3 genetlink: make multicast groups const, prevent abuse
Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg 68eb55031d genetlink: pass family to functions using groups
This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:06 -05:00
Johannes Berg c53ed74236 genetlink: only pass array to genl_register_family_with_ops()
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Hannes Frederic Sowa bceaa90240 inet: prevent leakage of uninitialized memory to user in recv syscalls
Only update *addr_len when we actually fill in sockaddr, otherwise we
can return uninitialized memory from the stack to the caller in the
recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL)
checks because we only get called with a valid addr_len pointer either
from sock_common_recvmsg or inet_recvmsg.

If a blocking read waits on a socket which is concurrently shut down we
now return zero and set msg_msgnamelen to 0.

Reported-by: mpb <mpb.mail@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18 15:12:03 -05:00
Jukka Rissanen 1188f05497 6lowpan: Uncompression of traffic class field was incorrect
If priority/traffic class field in IPv6 header is set (seen when
using ssh), the uncompression sets the TC and Flow fields incorrectly.

Example:

This is IPv6 header of a sent packet. Note the priority/TC (=1) in
the first byte.

00000000: 61 00 00 00 00 2c 06 40 fe 80 00 00 00 00 00 00
00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
00000020: 02 1e ab ff fe 4c 52 57

This gets compressed like this in the sending side

00000000: 72 31 04 06 02 1e ab ff fe 4c 52 57 ec c2 00 16
00000010: aa 2d fe 92 86 4e be c6 ....

In the receiving end, the packet gets uncompressed to this
IPv6 header

00000000: 60 06 06 02 00 2a 1e 40 fe 80 00 00 00 00 00 00
00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
00000020: ab ff fe 4c 52 57 ec c2

First four bytes are set incorrectly and we have also lost
two bytes from destination address.

The fix is to switch the case values in switch statement
when checking the TC field.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15 03:11:06 -05:00
Johannes Berg 4534de8305 genetlink: make all genl_ops users const
Now that genl_ops are no longer modified in place when
registering, they can be made const. This patch was done
mostly with spatch:

@@
identifier ops;
@@
+const
 struct genl_ops ops[] = {
 ...
 };

(except the struct thing in net/openvswitch/datapath.c)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:41 -05:00
Johannes Berg 1c582d915d ieee802154: use genl_register_family_with_ops()
This simplifies the code since there's no longer a need to
have error handling in the registration.

Unfortunately it means more extern function declarations are
needed, but the overall goal would seem to justify this.

While at it, also fix the registration error path - if the
family registration failed then it shouldn't be unregistered.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:40 -05:00
Dan Carpenter 78032f9b3e 6lowpan: release device on error path
We recently added a new error path and it needs a dev_put().

Fixes: 7adac1ec81 ('6lowpan: Only make 6lowpan links to IEEE802154 devices')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:11:13 -05:00
Alexander Aring 3582b900ad 6lowpan: cleanup skb copy data
This patch drops the direct memcpy on skb and uses the right skb
memcpy functions. Also remove an unnecessary check if plen is non zero.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:46 -04:00
Alexander Aring 578d524127 6lowpan: set 6lowpan network and transport header
This is necessary to access network header with the skb_network_header
function instead of calculate the position with mac_len, etc.
Do the same for the transport header, when we replace the IPv6 header
with the 6LoWPAN header.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:46 -04:00
Alexander Aring 3e69162ea4 6lowpan: set and use mac_len for mac header length
Set the mac header length while creating the 802.15.4 mac header.

Drop the function for recalculate mac header length in upper layers
which was static and works for intra pan communication only.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:46 -04:00
Alexander Aring 3961532fd4 6lowpan: remove unnecessary set of headers
On receiving side we don't need to set any headers in skb because the
6LoWPAN layer do not access it. Currently these values will set twice
after calling netif_rx.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30 17:18:45 -04:00
Alexander Aring 8ef007fd1d 6lowpan: remove unnecessary break
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:52 -04:00
Alexander Aring b236b954de 6lowpan: remove skb->dev assignment
This patch removes the assignment of skb->dev. We don't need it here because
we use the netdev_alloc_skb_ip_align function which already sets the
skb->dev.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:52 -04:00
Alexander Aring b614442f34 6lowpan: use netdev_alloc_skb instead dev_alloc_skb
This patch uses the netdev_alloc_skb instead dev_alloc_skb function and
drops the seperate assignment to skb->dev.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:51 -04:00
Alexander Aring 53cb5717b4 6lowpan: remove unnecessary check on err >= 0
The err variable can only be zero in this case.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:51 -04:00
Alexander Aring 545f3613a8 6lowpan: remove unnecessary ret variable
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 19:47:51 -04:00
Alan Ott ab2d95df9c 6lowpan: Sync default hardware address of lowpan links to their wpan
When a lowpan link to a wpan device is created, set the hardware address
of the lowpan link to that of the wpan device.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08 15:28:37 -04:00
Alan Ott 7adac1ec81 6lowpan: Only make 6lowpan links to IEEE802154 devices
Refuse to create 6lowpan links if the actual hardware interface is
of any type other than ARPHRD_IEEE802154.

Signed-off-by: Alan Ott <alan@signal11.us>
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08 15:28:37 -04:00
Linus Torvalds cc998ff881 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...
2013-09-05 14:54:29 -07:00
Alexander Aring 65d892c8ac 6lowpan: handle context based source address
Handle context based address when an unspecified address is given.
For other context based address we print a warning and drop the packet
because we don't support it right now.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 13:23:12 -07:00
Alexander Aring ce2463b283 6lowpan: lowpan_uncompress_addr with address_mode
This patch drops the pre and postcount calculation from the
lowpan_uncompress_addr function.We use instead a switch/case
over address_mode value. The original implementation has several
bugs in this function and it was hard to decrypt how it works.
To make it maintainable and fix these bugs this patch basically
reimplements lowpan_uncompress_addr from scratch.

A list of bugs we found in the current implementation:

1) Properly support uncompression of short-address based IPv6 addresses
   (instead of basically copying garbage)

2) Fix use and uncompression of long-addresses based IPv6 addresses

3) Add missing ff:fe00 in the case of SAM/DAM = 2 and M = 0

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 13:23:12 -07:00
Alexander Aring 84c2e7bcf5 6lowpan: add function to uncompress multicast addr
Add function to uncompress multicast address.
This function split the uncompress function for a multicast address
in a seperate function.

To uncompress a multicast address is different than a other
non-multicasts addresses according to rfc6282.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 13:23:12 -07:00
Alexander Aring 4666669fc3 6lowpan: introduce lowpan_fetch_skb function
This patch adds a helper function to parse the ipv6 header to a
6lowpan header in stream.

This function checks first if we can pull data with a specific
length from a skb. If this seems to be okay, we copy skb data to
a destination pointer and run skb_pull.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 13:23:11 -07:00
David Hauweele 31afe1f73e 6lowpan: Fix fragmentation with link-local compressed addresses
When a new 6lowpan fragment is received, a skbuff is allocated for
the reassembled packet. However when a 6lowpan packet compresses
link-local addresses based on link-layer addresses, the processing
function relies on the skb mac control block to find the related
link-layer address.

This patch copies the control block from the first fragment into
the newly allocated skb to keep a trace of the link-layer addresses
in case of a link-local compressed address.

Edit: small changes on comment issue

Signed-off-by: David Hauweele <david@hauweele.net>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 13:23:11 -07:00
Alexander Aring 84ce1ddfef 6lowpan: init ipv6hdr buffer to zero
This patch simplify the handling to set fields inside of struct ipv6hdr
to zero. Instead of setting some memory regions with memset to zero we
initialize the whole ipv6hdr to zero.

This is a simplification for parsing the 6lowpan header for the upcomming
patches.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 13:23:11 -07:00
Greg Kroah-Hartman 7f4708abf1 net: ieee802154: convert class code to use dev_groups
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead.  This converts the ieee802154 class code to use
the correct field.

Acked-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26 18:05:18 -07:00
Jiri Pirko 351638e7de net: pass info struct via netdevice notifier
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 13:11:01 -07:00
Werner Almesberger 56aa091d60 ieee802154/nl-mac.c: make some MLME operations optional
Check for NULL before calling the following operations from "struct
ieee802154_mlme_ops": assoc_req, assoc_resp, disassoc_req, start_req,
and scan_req.

This fixes a current oops where those functions are called but not
implemented. It also updates the documentation to clarify that they
are now optional by design. If a call to an unimplemented function
is attempted, the kernel returns EOPNOTSUPP via netlink.

The following operations are still required: get_phy, get_pan_id,
get_short_addr, and get_dsn.

Note that the places where this patch changes the initialization
of "ret" should not affect the rest of the code since "ret" was
always set (again) before returning its value.

Signed-off-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08 12:00:16 -04:00
Alan Ott fc52eea4c5 6lowpan: handle dev_queue_xmit() error code properly
dev_queue_xmit() will return a positive value if the packet could not be
queued, often because the real network device (in our case the mac802154
wpan device) has its queue stopped.  lowpan_xmit() should handle the
positive return code (for the debug statement) and return that value to
the higher layer so the higher layer will retry sending the packet.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07 17:06:44 -04:00
Hong zhi guo 10c9cbb10f netlink: fix the warning introduced by netlink API replacement
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29 14:44:37 -04:00
Hong zhi guo 573ce260b3 net-next: replace obsolete NLMSG_* with type safe nlmsg_*
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 14:25:25 -04:00
Tony Cheneau 6bdeaba47d 6lowpan: use IEEE802154_ADDR_LEN instead of a magic number
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27 00:52:16 -04:00
Tony Cheneau ababf38596 6lowpan: fix a small formatting issue
This formatting issue was introduced with commit
d4ac32365d

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27 00:52:16 -04:00
Stephen Röttger 6364e6ee78 ieee802154/dgram: Pass source address in dgram_recvmsg
This patch lets dgram_recvmsg fill in the sockaddr struct in
msg->msg_name with the source address of the packet.
This is used by the userland functions recvmsg and recvfrom to get the
senders address.

[Stefan: Changed from old zigbee legacy tree to mainline]

Signed-off-by: Stephen Röttger <stephen.roettger@zero-entropy.de>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27 00:52:06 -04:00
Tony Cheneau 24363b6732 6lowpan: modify udp compression/uncompression to match the standard
The previous code would just compress the UDP header and send the compressed
UDP header along with the uncompressed one.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:58 -04:00
Tony Cheneau 43de7aa6ac 6lowpan: use the PANID provided by the device instead of a static value
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:58 -04:00
Tony Cheneau c7d0ab28b4 6lowpan: obtain IEEE802.15.4 sequence number from the MAC layer
Sets the sequence number in the frame format. Without this fix, the sequence
number is always set to 0. This makes trafic analysis very hard.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:58 -04:00
Tony Cheneau d4ac32365d 6lowpan: store fragment tag values per device instead of net stack wide
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:57 -04:00
Tony Cheneau 9da2924c4b 6lowpan: add debug messages for 6LoWPAN fragmentation
Add pr_debug() call in order to debug 6LoWPAN fragmentation and
reassembly.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:57 -04:00
Tony Cheneau d991b98f50 6lowpan: fix first fragment (FRAG1) handling
The first fragment, FRAG1, must contain some payload according to the
specs. However, as it is currently written, the first fragment will
remain empty and only contain the 6lowpan headers.

This patch also extracts the transport layer information from the first
fragment. This information is used later on when uncompressing UDP
header.

Thanks to Wolf-Bastian Pöttner for noticing that the offset value was
not properly initialized.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:57 -04:00
Tony Cheneau 58ef67c318 6lowpan: use short IEEE 802.15.4 addresses for broadcast destination
The IEEE 802.15.4 standard uses the 0xFFFF short address (2 bytes) for message
broadcasting.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:56 -04:00
Tony Cheneau f333a15a3e 6lowpan: always enable link-layer acknowledgments
This feature is especially important when using fragmentation, because
the reassembly mechanism cannot recover from the loss of a fragment.

Note that some hardware ignore this flag and not will not transmit
acknowledgments even if this is set.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:55 -04:00
Tony Cheneau f5c20f58d9 6lowpan: next header is not properly set upon decompression of a UDP header.
This causes a drop of the UDP packet.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:55 -04:00
Tony Cheneau 8d879a3f98 6lowpan: lowpan_is_iid_16_bit_compressable() does not detect compressible address correctly
The current test is not RFC6282 compliant. The same issue has been found
and fixed in Contiki. This patch is basically a port of their fix.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:37:55 -04:00
YOSHIFUJI Hideaki / 吉藤英明 9026c49272 6lowpan: Fix endianness issue in is_addr_link_local().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10 16:49:35 -04:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Alexander Aring fc4e98dbba 6lowpan: use stack buffer instead of heap
head buffer is only temporary available in lowpan_header_create.
So it's not necessary to put it on the heap.

Also fixed a comment codestyle issue.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:56:17 -05:00
David S. Miller a07fdceccf 6lowpan: Remove __init tag from lowpan_netlink_fini().
It's called from both __init and __exit code, so neither
tag is appropriate.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:54:38 -05:00
Michał Mirosław 9f3b795a62 driver-core: constify data for class_find_device()
All in-kernel users of class_find_device() don't really need mutable
data for match callback.

In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c)
this patch changes match callbacks to use const search data.

The const is propagated to rtc_class_open() and power_supply_get_by_name()
parameters.

Note that there's a dev reference leak in suspend_test.c that's not
touched in this patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 12:18:56 -08:00
Alan Ott ee21c7e0d1 6lowpan: Handle uncompressed IPv6 packets over 6LoWPAN
Handle the reception of uncompressed packets (dispatch type = IPv6).

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18 14:18:30 -05:00
Alan Ott 0c446212c4 6lowpan: Refactor packet delivery into a function
Refactor the handing of the skb's to the individual lowpan devices into a
function.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18 14:18:30 -05:00
Kees Cook f4671a90c4 net/ieee802154: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
2013-01-11 11:40:00 -08:00
Alan Ott b333b7e6ec 6lowpan: consider checksum bytes in fragmentation threshold
Change the threshold for framentation of a lowpan packet from
using the MTU size to now use the MTU size minus the checksum length,
which is added by the hardware. For IEEE 802.15.4, this effectively
changes it from 127 bytes to 125 bytes.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 12:19:24 -05:00
Peter Senna Tschudin 4c835019a6 net/ieee802154/6lowpan.c: Remove unecessary semicolon
Found by http://coccinelle.lip6.fr/

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-18 16:08:19 -04:00
Eric W. Biederman 15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Alan Ott a2dc375e12 6lowpan: handle NETDEV_UNREGISTER event
Before, it was impossible to remove a wpan device which had lowpan
attached to it.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-01 22:48:02 -04:00
Alan Ott a437d2744b 6lowpan: Make a copy of skb's delivered to 6lowpan
Since lowpan_process_data() modifies the skb (by calling skb_pull()), we
need our own copy so that it doesn't affect the data received by other
protcols (in this case, af_ieee802154).

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-01 22:48:01 -04:00
Tony Cheneau 5e96855fc5 6lowpan: Change byte order when storing/accessing to len field
Lenght field should be encoded using big endian byte order, such as intend in the specs.
As it is currently written, the len field would not be decoded properly on an implementation using the correct byte ordering. Hence, it could lead to interroperability issues.

Also, I rewrote the code so that iphc0 argument of lowpan_alloc_new_frame could be removed.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16 22:52:02 -07:00
Tony Cheneau 4576039ffc 6lowpan: Change byte order when storing/accessing u16 tag
The tag field should be stored and accessed using big endian byte order (as
intended in the specs). Or else, when displayed with a trafic analyser, such a
Wireshark, the field not properly displayed (e.g. 0x01 00 instead of 0x00 01,
and so on).

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16 22:51:15 -07:00
Tony Cheneau d4787a1543 6lowpan: Fix null pointer dereference in UDP uncompression function
When a UDP packet gets fragmented, a crash will occur at reassembly time.
This is because skb->transport_header is not set during earlier period of fragment reassembly.
As a consequence, call to udp_hdr() return NULL and uh (which is NULL) gets
dereferenced without much test.

Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16 22:51:15 -07:00
alex.bluesman.smirnov@gmail.com 33c34c5e93 6lowpan: rework fragment-deleting routine
6lowpan module starts collecting incomming frames and fragments
right after lowpan_module_init() therefor it will be better to
clean unfinished fragments in lowpan_cleanup_module() function
instead of doing it when link goes down.

Changed spinlocks type to prevent deadlock with expired timer event
and removed unused one.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:46 -07:00
alex.bluesman.smirnov@gmail.com abbee2effc 6lowpan: fix tag variable size
Function lowpan_alloc_new_frame() takes u8 tag as an argument. However,
its only caller, lowpan_process_data() passes down a u16. Hence,
the tag value can get corrupted. This prevent 6lowpan fragment reassembly of a
message when the fragment tag value is over 256.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Tony Cheneau <tony.cheneau@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:45 -07:00
alex.bluesman.smirnov@gmail.com 79ff1db6d9 6lowpan: get extra headroom in allocated frame
Use netdev_alloc_skb_ip_align() instead of alloc_skb() to get some
extra headroom in case we need to forward this frame in a tunnel or
something else.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:45 -07:00
alex.bluesman.smirnov@gmail.com 4d27de149b 6lowpan: revert: add missing spin_lock_init()
Revert the commit 768f7c7c12 to initialize
spinlock in the more preferable way and make it static to avoid sparse
warning.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:45 -07:00
David S. Miller 04c9f416e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/batman-adv/bridge_loop_avoidance.c
	net/batman-adv/bridge_loop_avoidance.h
	net/batman-adv/soft-interface.c
	net/mac80211/mlme.c

With merge help from Antonio Quartulli (batman-adv) and
Stephen Rothwell (drivers/net/usb/qmi_wwan.c).

The net/mac80211/mlme.c conflict seemed easy enough, accounting for a
conversion to some new tracing macros.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 23:56:33 -07:00
Sasha Levin 3da947b269 ieee802154: verify packet size before trying to allocate it
Currently when sending data over datagram, the send function will attempt to
allocate any size passed on from the userspace.

We should make sure that this size is checked and limited. We'll limit it
to the MTU of the device, which is checked later anyway.

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-08 23:49:30 -07:00
alex.bluesman.smirnov@gmail.com 42c3629551 6lowpan: revert 'reuse eth_mac_addr()'
This reverts the commit cdf49c283e which
replaces lowpan '.ndo_set_mac_address' method by ethernet's one.

Accorind to the IEEE 802.15.4 standard, device has 8-byte length address,
so this hook loses the last 2 bytes which may rise a compatibility problems
with other IEEE 802.15.4 standard implementations.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 03:11:15 -07:00
Thomas Graf 58050fce35 net: Use NLMSG_DEFAULT_SIZE in combination with nlmsg_new()
Using NLMSG_GOODSIZE results in multiple pages being used as
nlmsg_new() will automatically add the size of the netlink
header to the payload thus exceeding the page limit.

NLMSG_DEFAULT_SIZE takes this into account.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 17:56:43 -07:00
Dan Carpenter 747cf6ed3d 6lowpan: double unlock on an error path
We already unlocked a few lines earlier here, so we can go directly to
drop without passing through unlock.  This was introduced recently in
c5d3687f6c ('6lowpan: read data from skb safely').

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27 01:16:45 -07:00
alex.bluesman.smirnov@gmail.com e71094f989 6lowpan: remove excessive argument in pr_debug
Remove excessive __func__ argument in pr_debug function and some
excessive debug messages.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25 16:40:31 -07:00
alex.bluesman.smirnov@gmail.com 5c00c0cba5 6lowpan: fix hop limit compression
Add missing pointer shift for the 'default' case.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Tony Cheneau <tony.cheneau+zigbeedev@amnesiak.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25 16:40:31 -07:00
alex.bluesman.smirnov@gmail.com c5d3687f6c 6lowpan: read data from skb safely
Check if skb buffer can pull requested amount of bytes and return
an error in opposite case.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25 16:40:31 -07:00
alex.bluesman.smirnov@gmail.com 90c049b2c6 ieee802154: interface type to be added
This stack implementation distinguishes several types of slave
interfaces. Another parameter to 'add_iface_' function is added
to clarify the interface type is going to be registered.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16 15:17:08 -04:00
David S. Miller 0d6c4a2e46 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/intel/e1000e/param.c
	drivers/net/wireless/iwlwifi/iwl-agn-rx.c
	drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
	drivers/net/wireless/iwlwifi/iwl-trans.h

Resolved the iwlwifi conflict with mainline using 3-way diff posted
by John Linville and Stephen Rothwell.  In 'net' we added a bug
fix to make iwlwifi report a more accurate skb->truesize but this
conflicted with RX path changes that happened meanwhile in net-next.

In e1000e a conflict arose in the validation code for settings of
adapter->itr.  'net-next' had more sophisticated logic so that
logic was used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:35:40 -04:00
alex.bluesman.smirnov@gmail.com 2d319508a3 6lowpan: duplicate definition of IEEE802154_ALEN
The same macros is defined in 'include/net/af_ieee802154.h' and is called
IEEE802154_ADDR_LEN. No need another one, so remove it.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 06:01:09 -04:00
alex.bluesman.smirnov@gmail.com c2e94d73ea 6lowpan: move frame allocation code to a separate function
Separate frame allocation routine from data processing function.
This makes code more human readable and easier for understanding.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 06:01:09 -04:00
alex.bluesman.smirnov@gmail.com 768f7c7c12 6lowpan: add missing spin_lock_init()
Add missing spin_lock_init() for frames list lock.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 05:32:55 -04:00
alex.bluesman.smirnov@gmail.com 8deff4af87 6lowpan: clean up fragments list if module unloaded
Clean all the pending fragments and relative timers if 6lowpan link
is going to be deleted.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 05:32:55 -04:00
alex.bluesman.smirnov@gmail.com 0848e40430 6lowpan: fix segmentation fault caused by mlme request
Add nescesary mlme callbacks to satisfy "iz list" request from user space.
Due to 6lowpan device doesn't have its own phy, mlme implemented as a pipe
to a real phy to which 6lowpan is attached.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 05:32:55 -04:00
Eric Dumazet 95c9617472 net: cleanup unsigned to unsigned int
Use of "unsigned int" is preferred to bare "unsigned" in net tree.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:44:40 -04:00
David S. Miller be51da0f3e ieee802154: Stop using NLA_PUT*().
These macros contain a hidden goto, and are thus extremely error
prone and make code hard to audit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 04:33:43 -04:00
Danny Kukawka cdf49c283e net/ieee802154/6lowpan.c: reuse eth_mac_addr()
Use eth_mac_addr() for .ndo_set_mac_address, remove
lowpan_set_address since it do currently the same as
eth_mac_addr(). Additional advantage: eth_mac_addr() already
checks if the given address is valid

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22 14:46:37 -05:00
Herbert Xu ae641949df net: Remove all uses of LL_ALLOCATED_SPACE
net: Remove all uses of LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

This patch replaces all uses of LL_ALLOCATED_SPACE with the macro
LL_RESERVED_SPACE and direct reference to needed_tailroom.

This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18 14:37:09 -05:00
Dan Carpenter d445ba613f 6LoWPAN: double free in lowpan_fragment_xmit()
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb()
in lowpan_fragment_xmit() is a double free.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 18:13:38 -05:00
alex.bluesman.smirnov@gmail.com f8b1b5d231 6LoWPAN: UDP header decompression
This patch provides possibility to decompress UDP headers.
Derived from Contiki OS.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14 00:19:43 -05:00
alex.bluesman.smirnov@gmail.com 3bd5b958c2 6LoWPAN: UDP header compression
This patch adds support for UDP header compression.
Derived from Contiki OS.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14 00:19:43 -05:00
alex.bluesman.smirnov@gmail.com 4d039f6843 6LoWPAN: set proper netdev flags
This patch fixes settings for device initialization which makes possible to
use NDISC and TCP.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14 00:19:43 -05:00
alex.bluesman.smirnov@gmail.com e86586ba8c 6LoWPAN: disable debugging by default
This patch disables debug output enabled by default.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14 00:19:42 -05:00
alex.bluesman.smirnov@gmail.com 719269afbc 6LoWPAN: add fragmentation support
This patch adds support for frame fragmentation.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14 00:19:42 -05:00
Paul Gortmaker bc3b2d7fb9 net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules
These files are non modular, but need to export symbols using
the macros now living in export.h -- call out the include so
that things won't break when we remove the implicit presence
of module.h from everywhere.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:30 -04:00
alex.bluesman.smirnov@gmail.com dcef115180 6LoWPAN: fix skb_copy call
This patch fixes 2 issues in lowpan_skb_deliver function:
1. Check for return status of skb_copy call;
2. Use skb_copy with proper GFP flag, drop check for non-interrupt
context.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:35 -04:00
Dan Carpenter dc00fd4441 6LoWPAN: call dev_put() on error in lowpan_newlink()
We should release the dev_hold() on error before returning here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
Dan Carpenter aec9db355c 6LoWPAN: use the _safe version of list_for_each
When we kfree(entry) that causes a use-after-free bug so we have to
use list_for_each_entry_safe() safe here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
Dan Carpenter 90d0963d17 6LoWPAN: use kfree_skb() instead of kfree()
Use kfree_skb() to free sbk_buffs.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15 15:36:32 -04:00
Alexander Smirnov 44331fe2aa IEEE802.15.4: 6LoWPAN basic support
This patch provides base support for transmission of IPv6 packets as
well as the formation of IPv6 link-local addresses and statelessly
autoconfigured addresses on top of IEEE 802.15.4 networks.

For more information please look at the RFC4944 "Compression Format
for IPv6 Datagrams in Low Power and Losst Networks (6LoWPAN).

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 19:36:06 -07:00
Alexander Smirnov fa1da8835b ieee802154: free skb buffer if dev isn't running
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-30 16:18:09 +04:00
Dmitry Eremin-Solenikov 5fd72607a4 ieee802154: it's IEEE 802.15.4, not ZigBee
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-30 16:18:09 +04:00
Dmitry Eremin-Solenikov 060e41794e ieee802154: support specifying hw address for created devices
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-30 16:18:09 +04:00
Jesper Juhl b9cabe52c2 ieee802154: Don't leak memory in ieee802154_nl_fill_phy
In net/ieee802154/nl-phy.c::ieee802154_nl_fill_phy() I see two small
issues.
1) If the allocation of 'buf' fails we may just as well return -EMSGSIZE
   directly rather than jumping to 'out:' and do a pointless kfree(0).
2) We do not free 'buf' unless we jump to one of the error labels and this
   leaks memory.
This patch should address both.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-13 18:03:22 -04:00
David S. Miller bfac3693c4 ieee802154: Remove hacked CFLAGS in net/ieee802154/Makefile
It adds -Wall (which the kernel carefully controls already) and of all
things -DDEBUG (which should be set by other means if desired, please
we have dynamic-debug these days).

Kill this noise.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12 15:33:23 -07:00
Eric Dumazet 941666c2e3 net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()
Le dimanche 05 décembre 2010 à 09:19 +0100, Eric Dumazet a écrit :

> Hmm..
>
> If somebody can explain why RTNL is held in arp_ioctl() (and therefore
> in arp_req_delete()), we might first remove RTNL use in arp_ioctl() so
> that your patch can be applied.
>
> Right now it is not good, because RTNL wont be necessarly held when you
> are going to call arp_invalidate() ?

While doing this analysis, I found a refcount bug in llc, I'll send a
patch for net-2.6

Meanwhile, here is the patch for net-next-2.6

Your patch then can be applied after mine.

Thanks

[PATCH] net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()

dev_getbyhwaddr() was called under RTNL.

Rename it to dev_getbyhwaddr_rcu() and change all its caller to now use
RCU locking instead of RTNL.

Change arp_ioctl() to use RCU instead of RTNL locking.

Note: this fix a dev refcount bug in llc

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-08 10:07:24 -08:00
Denis Kirjanov a6c0f8217c ieee802154: Fix possible NULL pointer dereference in wpan_phy_alloc
Check for NULL pointer after kzalloc

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23 23:11:07 -07:00
Stefan Schmidt 93c0c8b4a5 ieee802154: Fix oops during ieee802154_sock_ioctl
Trying to run izlisten (from lowpan-tools tests) on a device that does not
exists I got the oops below. The problem is that we are using get_dev_by_name
without checking if we really get a device back. We don't in this case and
writing to dev->type generates this oops.

[Oops code removed by Dmitry Eremin-Solenikov]

If possible this patch should be applied to the current -rc fixes branch.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 11:20:32 -07:00
Linus Torvalds cb4361c1dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  smc91c92_cs: fix the problem of "Unable to find hardware address"
  r8169: clean up my printk uglyness
  net: Hook up cxgb4 to Kconfig and Makefile
  cxgb4: Add main driver file and driver Makefile
  cxgb4: Add remaining driver headers and L2T management
  cxgb4: Add packet queues and packet DMA code
  cxgb4: Add HW and FW support code
  cxgb4: Add register, message, and FW definitions
  netlabel: Fix several rcu_dereference() calls used without RCU read locks
  bonding: fix potential deadlock in bond_uninit()
  net: check the length of the socket address passed to connect(2)
  stmmac: add documentation for the driver.
  stmmac: fix kconfig for crc32 build error
  be2net: fix bug in vlan rx path for big endian architecture
  be2net: fix flashing on big endian architectures
  be2net: fix a bug in flashing the redboot section
  bonding: bond_xmit_roundrobin() fix
  drivers/net: Add missing unlock
  net: gianfar - align BD ring size console messages
  net: gianfar - initialize per-queue statistics
  ...
2010-04-06 08:34:06 -07:00
Changli Gao 6503d96168 net: check the length of the socket address passed to connect(2)
check the length of the socket address passed to connect(2).

Check the length of the socket address passed to connect(2). If the
length is invalid, -EINVAL will be returned.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/bluetooth/l2cap.c | 3 ++-
net/bluetooth/rfcomm/sock.c | 3 ++-
net/bluetooth/sco.c | 3 ++-
net/can/bcm.c | 3 +++
net/ieee802154/af_ieee802154.c | 3 +++
net/ipv4/af_inet.c | 5 +++++
net/netlink/af_netlink.c | 3 +++
7 files changed, 20 insertions(+), 3 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 17:26:01 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Octavian Purdila 09ad9bc752 net: use net_eq to compare nets
Generated with the following semantic patch

@@
struct net *n1;
struct net *n2;
@@
- n1 == n2
+ net_eq(n1, n2)

@@
struct net *n1;
struct net *n2;
@@
- n1 != n2
+ !net_eq(n1, n2)

applied over {include,net,drivers/net}.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:14:13 -08:00
David S. Miller 958fc41e32 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan 2009-11-14 20:24:30 -08:00
Dmitry Eremin-Solenikov 282a39546f ieee802154: make wpan-phy class registration to subsys_initcall
Move ieee802154 initialisation to subsys_initcall call, so that
wpan-phy class is initialised before all devices (thus saving us from
oops during bootup).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-13 00:07:15 +03:00
David S. Miller 10d626f4f4 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan 2009-11-06 17:57:51 -08:00
Dmitry Eremin-Solenikov bb1cafb8fc ieee802154: add support for creation/removal of logic interfaces
Add support for two more NL802154 commands: ADD_IFACE and DEL_IFACE,
thus allowing creation and removal of logic WPAN interfaces on the top
of wpan-phy.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:32:24 +03:00
Dmitry Eremin-Solenikov 0a868b26c8 ieee802154: add PHY_NAME to LIST_IFACE command results
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:32:22 +03:00
Dmitry Eremin-Solenikov 339b4ca5f6 ieee802154: add two nl802154 helpers
Add two nl802154 helpers: one for starting a reply message, one for sending.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:32:21 +03:00
Dmitry Eremin-Solenikov 1eaa9d03d3 ieee802154: add LIST_PHY command support
Add nl802154 command to get information about PHY's present in
the system.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:31:22 +03:00
Dmitry Eremin-Solenikov 78fe738d1a ieee802154: split away MAC commands implementation
Move all mac-related stuff to separate file so that ieee802154/netlink.c
contains only generic code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:31:20 +03:00
Dmitry Eremin-Solenikov cb6b376357 ieee802154: merge nl802154 and wpan-class in single module
There is no real need to have ieee802154 interfaces separate
into several small modules, as neither of them has it's own use.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:31:18 +03:00
Dmitry Eremin-Solenikov e9cf356c0c wpan-phy: follow usual patter of devices registration
Follow the usual pattern of devices registration by adding new function
(wpan_phy_set_dev) that sets child->parent relationship and removing
parent argument from wpan_phy_register call.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:29:50 +03:00
Dmitry Eremin-Solenikov a0b4a738e0 wpan-phy: allow specifying a per-page channel mask
IEEE 802.15.4-2006 defines channel pages that hold channels (max 32 pages,
27 channels per page). Allow the driver to specify supported channels
on pages, other than the first one.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:23:41 +03:00
Dmitry Eremin-Solenikov 375bb0e04b wpan-phy: use snprintf to limit the amount of chars written
Use snprintf to limit the amount of chars put in the buffer for attr -> show.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:13:45 +03:00
Dmitry Eremin-Solenikov 37eb0edc84 wpan-phy: init channel/page fields
Set page to zero (for compatibility w/ devices supporting only first page).
Also init channel by default to -1 to disallow transfers for non-initialised
devices.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:13:22 +03:00
Dmitry Eremin-Solenikov 1c889f4db6 wpan-phy: add wpan-phy iteration functions
Add API to iterate over the wpan-phy instances.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06 14:12:24 +03:00
Eric Paris 3f378b6844 net: pass kern to net_proto_family create function
The generic __sock_create function has a kern argument which allows the
security system to make decisions based on if a socket is being created by
the kernel or by userspace.  This patch passes that flag to the
net_proto_family specific create function, so it can do the same thing.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05 22:18:14 -08:00
Eric Dumazet 766e9037cc net: sk_drops consolidation
sock_queue_rcv_skb() can update sk_drops itself, removing need for
callers to take care of it. This is more consistent since
sock_queue_rcv_skb() also reads sk_drops when queueing a skb.

This adds sk_drops managment to many protocols that not cared yet.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14 20:40:11 -07:00
Neil Horman 3b885787ea net: Generalize socket rx gap / receive queue overflow cmsg
Create a new socket level option to report number of queue overflows

Recently I augmented the AF_PACKET protocol to report the number of frames lost
on the socket receive queue between any two enqueued frames.  This value was
exported via a SOL_PACKET level cmsg.  AFter I completed that work it was
requested that this feature be generalized so that any datagram oriented socket
could make use of this option.  As such I've created this patch, It creates a
new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a
SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue
overflowed between any two given frames.  It also augments the AF_PACKET
protocol to take advantage of this new feature (as it previously did not touch
sk->sk_drops, which this patch uses to record the overflow count).  Tested
successfully by me.

Notes:

1) Unlike my previous patch, this patch simply records the sk_drops value, which
is not a number of drops between packets, but rather a total number of drops.
Deltas must be computed in user space.

2) While this patch currently works with datagram oriented protocols, it will
also be accepted by non-datagram oriented protocols. I'm not sure if thats
agreeable to everyone, but my argument in favor of doing so is that, for those
protocols which aren't applicable to this option, sk_drops will always be zero,
and reporting no drops on a receive queue that isn't used for those
non-participating protocols seems reasonable to me.  This also saves us having
to code in a per-protocol opt in mechanism.

3) This applies cleanly to net-next assuming that commit
977750076d (my af packet cmsg patch) is reverted

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 13:26:31 -07:00
Stephen Hemminger ec1b4cf74c net: mark net_proto_ops as const
All usages of structure net_proto_ops should be declared const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 01:10:46 -07:00
David S. Miller b7058842c9 net: Make setsockopt() optlen be unsigned.
This provides safety against negative optlen at the type
level instead of depending upon (sometimes non-trivial)
checks against this sprinkled all over the the place, in
each and every implementation.

Based upon work done by Arjan van de Ven and feedback
from Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30 16:12:20 -07:00
Dmitry Eremin-Solenikov c4835d81ef ieee802154: add locking for seq numbers
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-09-15 18:25:16 +04:00
Dmitry Eremin-Solenikov 066fc51275 af_ieee802154: setsockopt optlen arg isn't __user
Remove __user annotation from optlen arg as it's bogus.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-09-15 18:25:15 +04:00
Dmitry Eremin-Solenikov 929122cdd5 Drop ARPHRD_IEEE802154_PHY
There are not maste devices in mac802154 anymore, so drop
ARPHRD_IEEE802154_PHY definition.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:24 +04:00
Dmitry Eremin-Solenikov 16eea493da ieee802154: add support for channel pages from IEEE 802.15.4-2006
IEEE 802.15.4-2006 adds new concept: channel pages, which can contain several
channels. Add support for channel pages in the API and in the fakehard driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:22 +04:00
Dmitry Eremin-Solenikov 2bfb1070ba ieee802154: add a sysfs representation of WPAN master devices
Add a sysfs/in-kernel representation of LR-WPAN master devices.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:20 +04:00
Dmitry Baryshkov acb8aacda3 nl802154: support START-CONFIRM primitive
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:51 -07:00
Dmitry Baryshkov 99eb855864 af_ieee802154: add support for WANT_ACK socket option
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:50 -07:00
Dmitry Baryshkov 74eda55db4 af_ieee802154: minor cleanup in dgram_bind
1) fix ro->bound protection by socket lock
2) make ro->bound bit instead of int

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:50 -07:00
Dmitry Baryshkov 8e753dd0a8 nl802154: add support for dumping WPAN interface information
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:49 -07:00
Dmitry Baryshkov 78090a58c4 nl802154: make ieee802154_policy constant
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 20:49:48 -07:00
David S. Miller aa11d958d1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	arch/microblaze/include/asm/socket.h
2009-08-12 17:44:53 -07:00
Dmitry Eremin-Solenikov a9dfac3353 af_ieee802154: provide dummy get/setsockopt
Provide dummt get/setsockopt implementations to stop these
syscalls from oopsing on our sockets.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-06 12:49:19 +04:00
Dmitry Eremin-Solenikov 45a41d147a af_ieee802154: fix ioctl processing
fix two errors in ioctl processing:
1) if the ioctl isn't supported one should return -ENOIOCTLCMD
2) don't call ndo_do_ioctl if the device doesn't provide it

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-06 12:49:17 +04:00
Dmitry Eremin-Solenikov f0166e5e3c ieee802154: move headers out of extra directory
include/net/ieee802154/af_ieee802154.h (and others) naming seems to be too long
and redundant. Drop one level of subdirectories.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-07-23 17:08:51 +04:00
Dmitry Eremin-Solenikov dfd06fe824 nl802154: add module license and description
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-06-29 18:20:28 +04:00
Dmitry Eremin-Solenikov 932c1329ac nl802154: fix Oops in ieee802154_nl_get_dev
ieee802154_nl_get_dev() lacks check for the existance of the device
that was returned by dev_get_XXX, thus resulting in Oops for non-existing
devices. Fix it.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-06-29 18:20:27 +04:00
Dmitry Baryshkov 25502bda07 ieee802154: use standard routine for printing dumps
Use print_hex_dump_bytes instead of self-written dumping function
for outputting packet dumps.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19 00:18:43 -07:00
Eric Dumazet 31e6d363ab net: correct off-by-one write allocations reports
commit 2b85a34e91
(net: No more expensive sock_hold()/sock_put() on each tx)
changed initial sk_wmem_alloc value.

We need to take into account this offset when reporting
sk_wmem_alloc to user, in PROC_FS files or various
ioctls (SIOCOUTQ/TIOCOUTQ)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18 00:29:12 -07:00
David S. Miller e5241c448f ieee802154: Use '%Zu' printf format for size_t.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:10:19 -07:00
Sergey Lapin 2c21d11518 net: add NL802154 interface for configuration of 802.15.4 devices
Add a netlink interface for configuration of IEEE 802.15.4 device. Also this
interface specifies events notification sent by devices towards higher layers.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:33 -07:00
Sergey Lapin 9ec7671603 net: add IEEE 802.15.4 socket family implementation
Add support for communication over IEEE 802.15.4 networks. This implementation
is neither certified nor complete, but aims to that goal. This commit contains
only the socket interface for communication over IEEE 802.15.4 networks.
One can either send RAW datagrams or use SOCK_DGRAM to encapsulate data
inside normal IEEE 802.15.4 packets.

Configuration interface, drivers and software MAC 802.15.4 implementation will
follow.

Initial implementation was done by Maxim Gorbachyov, Maxim Osipov and Pavel
Smolensky as a research project at Siemens AG. Later the stack was heavily
reworked to better suit the linux networking model, and is now maitained
as an open project partially sponsored by Siemens.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:32 -07:00