Commit Graph

283 Commits

Author SHA1 Message Date
Uwe Kleine-König 59e9fcf877 of: restore old handling of cells_name=NULL in of_*_phandle_with_args()
Before commit e42ee61017 ("of: Let of_for_each_phandle fallback to
non-negative cell_count") the iterator functions calling
of_for_each_phandle assumed a cell count of 0 if cells_name was NULL.
This corner case was missed when implementing the fallback logic in
e42ee61017 and resulted in an endless loop.

Restore the old behaviour of of_count_phandle_with_args() and
of_parse_phandle_with_args() and add a check to
of_phandle_iterator_init() to prevent a similar failure as a safety
precaution. of_parse_phandle_with_args_map() doesn't need a similar fix
as cells_name isn't NULL there.

Affected drivers are:
 - drivers/base/power/domain.c
 - drivers/base/power/domain.c
 - drivers/clk/ti/clk-dra7-atl.c
 - drivers/hwmon/ibmpowernv.c
 - drivers/i2c/muxes/i2c-demux-pinctrl.c
 - drivers/iommu/mtk_iommu.c
 - drivers/net/ethernet/freescale/fman/mac.c
 - drivers/opp/of.c
 - drivers/perf/arm_dsu_pmu.c
 - drivers/regulator/of_regulator.c
 - drivers/remoteproc/imx_rproc.c
 - drivers/soc/rockchip/pm_domains.c
 - sound/soc/fsl/imx-audmix.c
 - sound/soc/fsl/imx-audmix.c
 - sound/soc/meson/axg-card.c
 - sound/soc/samsung/tm2_wm5110.c
 - sound/soc/samsung/tm2_wm5110.c

Thanks to Geert Uytterhoeven for reporting the issue, Peter Rosin for
helping pinpoint the actual problem and the testers for confirming this
fix.

Fixes: e42ee61017 ("of: Let of_for_each_phandle fallback to non-negative cell_count")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-19 08:33:02 -05:00
Uwe Kleine-König e42ee61017 of: Let of_for_each_phandle fallback to non-negative cell_count
Referencing device tree nodes from a property allows to pass arguments.
This is for example used for referencing gpios. This looks as follows:

	gpio_ctrl: gpio-controller {
		#gpio-cells = <2>
		...
	}

	someothernode {
		gpios = <&gpio_ctrl 5 0 &gpio_ctrl 3 0>;
		...
	}

To know the number of arguments this must be either fixed, or the
referenced node is checked for a $cells_name (here: "#gpio-cells")
property and with this information the start of the second reference can
be determined.

Currently regulators are referenced with no additional arguments. To
allow some optional arguments without having to change all referenced
nodes this change introduces a way to specify a default cell_count. So
when a phandle is parsed we check for the $cells_name property and use
it as before if present. If it is not present we fall back to
cells_count if non-negative and only fail if cells_count is smaller than
zero.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-13 16:55:12 -05:00
Jean-Philippe Brucker fb709b5e1c of: Allow the iommu-map property to omit untranslated devices
In PCI root complex nodes, the iommu-map property describes the IOMMU that
translates each endpoint. On some platforms, the IOMMU itself is presented
as a PCI endpoint (e.g. AMD IOMMU and virtio-iommu). This isn't supported
by the current OF driver, which expects all endpoints to have an IOMMU.
Allow the iommu-map property to have gaps.

Relaxing of_map_rid() also allows the msi-map property to have gaps, which
is invalid since MSIs always reach an MSI controller. In that case
pci_msi_setup_msi_irqs() will return an error when attempting to find the
device's MSI domain.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-06 17:32:13 -04:00
Florian Fainelli af3be70a32 of: Improve of_phandle_iterator_next() error message
Understanding why of_phandle_iterator_next() returns an error can
sometimes be hard to decipher based solely on the error message, a
typical error example is that #foo-cells = <X> and the phandle property
used has a smaller number of cells specified, e.g.:

	#thermal-sensor-cells = <1>;
	phandle = <&scmi_sensor>

instead of:

	phandle <&scmi_sensor 0>;

Instead, make it clear what the expectations are towards debugging
incorrect Device Tree faster:

OF: /thermal-zones/scmi-thermal: #thermal-sensor-cells = 1, found 0 instead

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-04-10 16:33:48 -05:00
Frank Rowand 5801169a2e of: __of_detach_node() - remove node from phandle cache
Non-overlay dynamic devicetree node removal may leave the node in
the phandle cache.  Subsequent calls to of_find_node_by_phandle()
will incorrectly find the stale entry.  Remove the node from the
cache.

Add paranoia checks in of_find_node_by_phandle() as a second level
of defense (do not return cached node if detached, do not add node
to cache if detached).

Fixes: 0b3ce78e90 ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Reported-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-21 12:42:36 -06:00
Frank Rowand b8a9ac1a5b of: of_node_get()/of_node_put() nodes held in phandle cache
The phandle cache contains struct device_node pointers.  The refcount
of the pointers was not incremented while in the cache, allowing use
after free error after kfree() of the node.  Add the proper increment
and decrement of the use count.

Fixes: 0b3ce78e90 ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-21 12:41:58 -06:00
Rob Herring b3e46d1a05 of: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-05 14:45:13 -06:00
Rob Herring e8b1dee214 of: Use device_type helpers to access the node type
Remove directly accessing device_node.type pointer and use the accessors
instead. This will eventually allow removing the type pointer.

Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-27 11:27:04 -06:00
Linus Torvalds 34c7685a17 Devicetree fixes for v4.20-rc1:
- Fix cpu node iterator for powerpc systems
 
 - Clarify ARM CPU binding 'capacities-dmips-mhz' property calculations
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlvbbZAQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw7jbD/4ssXLQHvj0z7wh05Bi7xtkHjjSRj6ymTMQ
 KfYHMOrjbA5bGG/zvRiYPyXM1y06nMPlbMqWQZdtXweFK5fKFQ5J7+x99cAaFPlJ
 fRbhwVSMjiTThrupcWrt8a3DIxTdqHIxtVwALCETkXIQb54rffEG2uEO9SnmccQW
 gFyAga2fcUvXj+5UyFHFZVvQWs9ZhQt4sb7UyaXCZI3p9L7KLzL/uGTtp/bcXQ+7
 D3f6P0rq2YUSWvE9QxQvnoPopbICG4+PFeK70owCgNUFrnfmh+r2TnAvcMzZOgI4
 Qj8NL+RIqXxP5S7oS2OzHifNnv861HwkbSo/sQR1QFcffkFcBrqPoFMFmvqGagRX
 CGktqt52+7xtKngfnMXvzy+xFcxAch1MHUxSCuPLzzyg5e/EFBKb9unXGuZ3cgyV
 kO9f2xDRt72VqV4C8bvBs3QNqc9MUVd/qfmz0ZGeJrsQ6snMffrOhPlNvLFU1zuj
 HoPZuCji8xGn++Mx0/YpECc+JUX4bnPL1ZoY0rDrgqfshfIjN7BB3StteHIY7rak
 PxwhTjpIIOl6W2w8BqcTy54xLZeo2D3O1fxK4SG5IS8AwD3xLOaMI6YcRMz1zehE
 ELw7zfNBFAlXfXkUNRHqJtNXCFwOTrFaTaQd2EC90BUMj+7YJlkDVj3PIHlFZLMR
 ulF4/8AcPQ==
 =AG4j
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:

 - fix cpu node iterator for powerpc systems

 - clarify ARM CPU binding 'capacities-dmips-mhz' property calculations

* tag 'devicetree-fixes-for-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Fix cpu node iterator to not ignore disabled cpu nodes
  dt-bindings: arm: Explain capacities-dmips-mhz calculations in example
2018-11-01 14:45:38 -07:00
Rob Herring c961cb3be9 of: Fix cpu node iterator to not ignore disabled cpu nodes
In most cases, nodes with 'status = "disabled";' are treated as if the
node is not present though it is a common bug to forget to check that.
However, cpu nodes are different in that "disabled" simply means offline
and the OS can bring the CPU core online. Commit f1f207e43b ("of: Add
cpu node iterator for_each_of_cpu_node()") followed the common behavior
of ignoring disabled cpu nodes. This breaks some powerpc systems (at
least NXP P50XX/e5500). Fix this by dropping the status check.

Fixes: 651d44f967 ("of: use for_each_of_cpu_node iterator")
Fixes: f1f207e43b ("of: Add cpu node iterator for_each_of_cpu_node()")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-01 16:16:54 -05:00
Linus Torvalds 5bd4af34a0 TTY/Serial patches for 4.20-rc1
Here is the big tty and serial pull request for 4.20-rc1
 
 Lots of little things here, including a merge from the SPI tree in order
 to keep things simpler for everyone to sync around for one platform.
 
 Major stuff is:
 	- tty buffer clearing after use
 	- atmel_serial fixes and additions
 	- xilinx uart driver updates
 and of course, lots of tiny fixes and additions to individual serial
 drivers.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9bW0w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymYhgCfbxr0T+4lF/rpGxNXNnV4u5boRJUAn2L8R+1y
 URbAWHvKfaby2AVfQ1z0
 =qTHH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big tty and serial pull request for 4.20-rc1

  Lots of little things here, including a merge from the SPI tree in
  order to keep things simpler for everyone to sync around for one
  platform.

  Major stuff is:

   - tty buffer clearing after use

   - atmel_serial fixes and additions

   - xilinx uart driver updates

  and of course, lots of tiny fixes and additions to individual serial
  drivers.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  of: base: Change logic in of_alias_get_alias_list()
  of: base: Fix english spelling in of_alias_get_alias_list()
  serial: sh-sci: do not warn if DMA transfers are not supported
  serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES
  tty: check name length in tty_find_polling_driver()
  serial: sh-sci: Add r8a77990 support
  tty: wipe buffer if not echoing data
  tty: wipe buffer.
  serial: fsl_lpuart: Remove the alias node dependence
  TTY: sn_console: Replace spin_is_locked() with spin_trylock()
  Revert "serial:serial_core: Allow use of CTS for PPS line discipline"
  serial: 8250_uniphier: add auto-flow-control support
  serial: 8250_uniphier: flatten probe function
  serial: 8250_uniphier: remove unused "fifo-size" property
  dt-bindings: serial: sh-sci: Document r8a7744 bindings
  serial: uartps: Fix missing unlock on error in cdns_get_id()
  tty/serial: atmel: add ISO7816 support
  tty/serial_core: add ISO7816 infrastructure
  serial:serial_core: Allow use of CTS for PPS line discipline
  serial: docs: Fix filename for serial reference implementation
  ...
2018-10-29 10:42:20 -07:00
Linus Torvalds b27186abb3 Devicetree updates for 4.20:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
 
 - Work to get rid of direct accesses to struct device_node name and
   type pointers in preparation for removing them. New helpers for
   parsing DT cpu nodes and conversions to use the helpers. printk
   conversions to %pOFn for printing DT node names. Most went thru
   subystem trees, so this is the remainder.
 
 - Fixes to DT child node lookups to actually be restricted to child
   nodes instead of treewide.
 
 - Refactoring of dtb targets out of arch code. This makes the support
   more uniform and enables building all dtbs on c6x, microblaze, and
   powerpc.
 
 - Various DT binding updates for Renesas r8a7744 SoC
 
 - Vendor prefixes for Facebook, OLPC
 
 - Restructuring of some ARM binding docs moving some peripheral bindings
   out of board/SoC binding files
 
 - New "secure-chosen" binding for secure world settings on ARM
 
 - Dual licensing of 2 DT IRQ binding headers
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlvTKWYQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw8J5EACMAnrTxWQmXfQXOZEVxztcFavH6LP8mh2e
 7FZIZ38jzHXXvl81tAg1nBhzFUU/qtvqW8NDCZ9OBxKvp6PFDNhWu241ZodSB1Kw
 MZWy2A9QC+qbHYCC+SB5gOT0+Py3v7LNCBa5/TxhbFd35THJM8X0FP7gmcCGX593
 9Ml1rqawT4mK5XmCpczT0cXxyC4TgVtpfDWZH2KgJTR/kwXVQlOQOGZ8a1y/wrt7
 8TLIe7Qy4SFRzjhwbSta1PUehyYfe4uTSsXIJ84kMvNMxinLXQtvd7t9TfsK8p/R
 WjYUneJskVjtxVrMQfdV4MxyFL1YEt2mYcr0PMKIWxMCgGDAZsHPoUZmjyh/PrCI
 uiZtEHn3fXpUZAV/xEHHNirJxYyQfHGiksAT+lPrUXYYLCcZ3ZmqiTEYhGoQAfH5
 CQPMuxA6yXxp6bov6zJwZSTZtkXciju8aQRhUhlxIfHTqezmGYeql/bnWd+InNuR
 upANLZBh6D2jTWzDyobconkCCLlVkSqDoqOx725mMl6hIcdH9d2jVX7hwRf077VI
 5i3CyPSJOkSOLSdB8bAPYfBoaDtH2bthxieUrkkSbIjbwHO1H6a2lxPeG/zah0a3
 ePMGhi7J84UM4VpJEi000cP+bhPumJtJrG7zxP7ldXdfAF436sQ6KRptlcpLpj5i
 IwMhUQNH+g==
 =335v
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...
2018-10-26 12:09:58 -07:00
Rob Herring 173ee39629 of: Add missing exports of node name compare functions
Commit f42b0e18f2 ("of: add node name compare helper functions")
failed to add the module exports to of_node_name_eq() and
of_node_name_prefix(). Add them now.

Fixes: f42b0e18f2 ("of: add node name compare helper functions")
Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-22 09:03:54 -05:00
Michal Simek 59eaeba63a of: base: Change logic in of_alias_get_alias_list()
Check compatible string first before setting up bit in bitmap to also
cover cases that allocated bitfield is not big enough.
Show warning about it but let driver to continue to work with allocated
bitfield to keep at least some devices (included console which
is commonly close to serial0) to work.

Fixes: b1078c355d ("of: base: Introduce of_alias_get_alias_list() to check alias IDs")
Fixes: ae1cca3fa3 ("serial: uartps: Change uart ID port allocation")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:16:06 +02:00
Michal Simek 7acf79b6b2 of: base: Fix english spelling in of_alias_get_alias_list()
Fix english spelling in of_alias_get_alias_list().

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: b1078c355d ("of: base: Introduce of_alias_get_alias_list() to check alias IDs")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:16:06 +02:00
Rob Herring 389d0a8a7a Merge branch 'dt/cpu-type-rework' into dt/next 2018-09-28 15:48:39 -05:00
Rob Herring 651d44f967 of: use for_each_of_cpu_node iterator
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".

Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28 14:25:58 -05:00
Rob Herring 6487c15f1c of: Support matching cpu nodes with no 'reg' property
For some single core ARM systems, the DTs can have a single cpu node
without a reg property and #address-cells == 0. This case is valid and
should match on cpu #0.

Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28 14:25:58 -05:00
Rob Herring f1f207e43b of: Add cpu node iterator for_each_of_cpu_node()
Iterating thru cpu nodes is a common pattern. Create a common iterator
which can find child nodes either by node name or device_type == cpu.
Using the former will allow for eventually dropping device_type
properties which are deprecated for FDT.

Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28 14:25:58 -05:00
Nipun Gupta 2a6db719c9 iommu/of: make of_pci_map_rid() available for other devices too
iommu-map property is also used by devices with fsl-mc. This
patch moves the of_pci_map_rid to generic location, so that it
can be used by other busses too.

'of_pci_map_rid' is renamed here to 'of_map_rid' and there is no
functional change done in the API.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25 09:47:52 +02:00
Michal Simek b1078c355d of: base: Introduce of_alias_get_alias_list() to check alias IDs
The function travels the lookup table to record alias ids for the given
device match structures and alias stem.
This function will be used by serial drivers to check if requested alias
is allocated or free to use.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:49:53 +02:00
Rob Herring 362ce2b8e5 Merge branch 'dt/linus' into HEAD 2018-09-19 15:10:03 -07:00
Rob Herring e54192b48d of: fix phandle cache creation for DTs with no phandles
With commit 0b3ce78e90 ("of: cache phandle nodes to reduce cost of
of_find_node_by_phandle()"), a G3 PowerMac fails to boot. The root cause
is the DT for this system has no phandle properties when booted with
BootX. of_populate_phandle_cache() does not handle the case of no
phandles correctly. The problem is roundup_pow_of_two() for 0 is
undefined. The implementation subtracts 1 underflowing and then things
are in the weeds.

Fixes: 0b3ce78e90 ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Cc: stable@vger.kernel.org # 4.17+
Reported-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-11 11:28:40 -05:00
Rob Herring f6707fd624 of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC
Cache nodes under the cpu node(s) is PowerMac specific according to the
comment above, so make the code enforce that.

Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-07 11:04:41 -05:00
Rob Herring f42b0e18f2 of: add node name compare helper functions
In preparation to remove device_node.name pointer, add helper functions
for node name comparisons which are a common pattern throughout the kernel.

Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-30 13:53:05 -05:00
Johan Hovold 36156f9241 of: add helper to lookup compatible child node
Add of_get_compatible_child() helper that can be used to lookup
compatible child nodes.

Several drivers currently use of_find_compatible_node() to lookup child
nodes while failing to notice that the of_find_ functions search the
entire tree depth-first (from a given start node) and therefore can
match unrelated nodes. The fact that these functions also drop a
reference to the node they start searching from (e.g. the parent node)
is typically also overlooked, something which can lead to use-after-free
bugs.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-29 08:06:46 -05:00
Frank Rowand b9952b5218 of: overlay: update phandle cache on overlay apply and remove
A comment in the review of the patch adding the phandle cache said that
the cache would have to be updated when modules are applied and removed.
This patch implements the cache updates.

Fixes: 0b3ce78e90 ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Reported-by: Alan Tull <atull@kernel.org>
Suggested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-16 08:41:32 -06:00
Frank Rowand 0b3ce78e90 of: cache phandle nodes to reduce cost of of_find_node_by_phandle()
Create a cache of the nodes that contain a phandle property.  Use this
cache to find the node for a given phandle value instead of scanning
the devicetree to find the node.  If the phandle value is not found
in the cache, of_find_node_by_phandle() will fall back to the tree
scan algorithm.

The cache is initialized in of_core_init().

The cache is freed via a late_initcall_sync() if modules are not
enabled.

If the devicetree is created by the dtc compiler, with all phandle
property values auto generated, then the size required by the cache
could be 4 * (1 + number of phandles) bytes.  This results in an O(1)
node lookup cost for a given phandle value.  Due to a concern that the
phandle property values might not be consistent with what is generated
by the dtc compiler, a mask has been added to the cache lookup algorithm.
To maintain the O(1) node lookup cost, the size of the cache has been
increased by rounding the number of entries up to the next power of
two.

The overhead of finding the devicetree node containing a given phandle
value has been noted by several people in the recent past, in some cases
with a patch to add a hashed index of devicetree nodes, based on the
phandle value of the node.  One concern with this approach is the extra
space added to each node.  This patch takes advantage of the phandle
property values auto generated by the dtc compiler, which begin with
one and monotonically increase by one, resulting in a range of 1..n
for n phandle values.  This implementation should also provide a good
reduction of overhead for any range of phandle values that are mostly
in a monotonic range.

Performance measurements by Chintan Pandya <cpandya@codeaurora.org>
of several implementations of patches that are similar to this one
suggest an expected reduction of boot time by ~400ms for his test
system.  If the cache size was decreased to 64 entries, the boot
time was reduced by ~340 ms.  The measurements were on a 4.9.73 kernel
for arch/arm64/boot/dts/qcom/sda670-mtp.dts, contains 2371 nodes and
814 phandle values.

Reported-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-07 14:50:09 -06:00
Stephen Boyd bd6f2fd5a1 of: Support parsing phandle argument lists through a nexus node
Platforms like 96boards have a standardized connector/expansion
slot that exposes signals like GPIOs to expansion boards in an
SoC agnostic way. We'd like the DT overlays for the expansion
boards to be written once without knowledge of the SoC on the
other side of the connector. This avoids the unscalable
combinatorial explosion of a different DT overlay for each
expansion board and SoC pair.

We need a way to describe the GPIOs routed through the connector
in an SoC agnostic way. Let's introduce nexus property parsing
into the OF core to do this. This is largely based on the
interrupt nexus support we already have. This allows us to remap
a phandle list in a consumer node (e.g. reset-gpios) through a
connector in a generic way (e.g. via gpio-map). Do this in a
generic routine so that we can remap any sort of variable length
phandle list.

Taking GPIOs as an example, the connector would be a GPIO nexus,
supporting the remapping of a GPIO specifier space to multiple
GPIO providers on the SoC. DT would look as shown below, where
'soc_gpio1' and 'soc_gpio2' are inside the SoC, 'connector' is an
expansion port where boards can be plugged in, and
'expansion_device' is a device on the expansion board.

	soc {
		soc_gpio1: gpio-controller1 {
			#gpio-cells = <2>;
		};

		soc_gpio2: gpio-controller2 {
			#gpio-cells = <2>;
		};
	};

	connector: connector {
		#gpio-cells = <2>;
		gpio-map = <0 0 &soc_gpio1 1 0>,
			   <1 0 &soc_gpio2 4 0>,
			   <2 0 &soc_gpio1 3 0>,
			   <3 0 &soc_gpio2 2 0>;
		gpio-map-mask = <0xf 0x0>;
		gpio-map-pass-thru = <0x0 0x1>
	};

	expansion_device {
		reset-gpios = <&connector 2 GPIO_ACTIVE_LOW>;
	};

The GPIO core would use of_parse_phandle_with_args_map() instead
of of_parse_phandle_with_args() and arrive at the same type of
result, a phandle and argument list. The difference is that the
phandle and arguments will be remapped through the nexus node to
the underlying SoC GPIO controller node. In the example above,
we would remap 'reset-gpios' from <&connector 2 GPIO_ACTIVE_LOW>
to <&soc_gpio1 3 GPIO_ACTIVE_LOW>.

Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-02-12 08:37:58 -06:00
Linus Torvalds 2bed26606b DeviceTree updates for 4.16:
- Convert to use memblock_virt_alloc in DT code which supports bootmem
   arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.
 
 - Enable running the DT unittests on UML
 
 - Use SPDX license tags on DT files
 
 - Fix early FDT kconfig ifdef logic
 
 - Clean-up unittest Makefile
 
 - Fix function comment for of_irq_parse_raw
 
 - Add missing documentation for linux,initrd-{start,end} properties
 
 - Clean-up of binding examples using uppercase hex
 
 - Add trivial devices W83773G and Infineon TLV493D-A1B6
 
 - Add missing STM32 SoC bindings
 
 - Various small binding doc fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJac0m3EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOmXA/9
 G/ZySEtV2RnW/z8bckNnG98F9M/yxFwKARYb4HPDGr4C6fYy9IO3sQ25Gjn9GgQm
 RzcOk40P+3YQvkb5eyha6zYYxrBwKNHjRoJJWpCpNAolJrYRgPn7gB9GLxs15mc8
 F1EdSrdJDsNxxrc44T6hJ2xfU/sY5Q7E9xVAKD9pStmENUhzyLnPuyT4UrqAnCVC
 1tqBjYgmHWsQxzgO9tSM629xKxgBVLPjoOULN8vWTcN+5RFQSgB/MFv611SKXo2h
 cIDH7Hm61MBMvblGTtEkz1pi+mF62BOvaHJdYKdAF0i1HrjIyIEysHC6rKrlYsF1
 B39HY8D+kIPr39OCdn6dONDtrWkmPSc/MYfqLjFDPIwgNtgDRkv9kugEi39/LTKP
 htpcD9zctRQLuDJtW+1TyQvNtEHEPY2QhRjKb1SdD4xK/phMcEhc8+sW88jFygtP
 xlNb12FCCjw83k801oX1QHgWR8mQg0cj2hrJxrMIJ+Hrb23TvBdN+wtPc6WkKjol
 zqHZ9vFK4z8LIPR6jPLsz9vAIBHcXKVWgSGSf41MhTSZYTOznR7HG1wgTcq4XMld
 VpKdWKbRa3B/ZqP01eCHmBLIt/f0pcieoa7b20uIf2PjWQmzRkaX9A0yfWrYsV/V
 JQogXMCSe7zfZBxrLRx37UP7hqMEIgWeTN+Ek0a4dOI=
 =v6gj
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from <linux/libfdt.h>
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...
2018-02-01 10:57:45 -08:00
Rob Herring af6074fc9a of: Use SPDX license tag for DT files
Convert remaining DT files to use SPDX-License-Identifier tags.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-01-08 08:22:45 -06:00
Suzuki K Poulose a0e71cd9b1 of: Add helper for mapping device node to logical CPU number
Add a helper to map a device node to a logical CPU number to avoid
duplication. Currently this is open coded in different places (e.g
gic-v3, coresight). The helper tries to map device node to a "possible"
logical CPU id, which may not be online yet. It is the responsibility
of the user to make sure that the CPU is online. The helper uses
of_cpu_device_node_get() to retrieve the device node for a given CPU
(which uses per_cpu data if available else falls back to slower
of_get_cpu_node()).

Cc: devicetree@vger.kernel.org
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-01-02 16:43:12 +00:00
Linus Torvalds c633e898bd DeviceTree fixes for 4.15:
- Remove mc13892 as a trivial device
 
 - Improve of_find_node_by_name() documentation
 
 - Fix unit test dtc warnings
 
 - Clean-ups of USB binding documentation
 
 - Fix potential NULL deref in of_pci_map_rid
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaEx6REBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOnnRAA
 kP/o4X2Zo2VCZMHkLunDIwXXmNAn+Eh6WzbzWROn/J8A3sBH2jMJWzQrfBQqdUTC
 KXtJkDxmIFqtaUI6aD5ZekLZ/dE/iDAwzYtHMwmcw73g2An1+mxeLnv7GGTD3V9Y
 kiAeLqD3d1dS1ee+d/+g4t8Lj5W+8ClFyZk/CJ5oBRtWfyh/53vZsw/PuCSooXFY
 gFn/5YRctQyk5x/F/ELGRSuN54Lz9+wHG2pJc83+hRSbpvPJWiisXdGH/dhGO+V8
 YhbSldtjfUZBNgFwdJJQISYw/6jA7iETwIy69cIHkJ674/dkyyw4IzgvjVocQN5e
 Q7egpeh/3YXNSSZe+gSqj6LjERrX8RIlHFhS28qgliA3UrtnPgw3RbhEaO2CSBHz
 /MoYK/ZjTwXYgDjjSP05WQ+MsnogiAYUhMx4GNcAq092BDOd9f0pzIiapLwrzje3
 rWHixC4lMsU97X5jJhu+Er6d8AKl2mDoI2J3UCOsxlM0sIsTTk10qCpXwIes2TKk
 qMSCUZfwTO239w2DUG/TokXi8Q1v28TiKT1JE6yaQe6VDXHPRfxnGrJ57b4HZYPr
 139jXxJ6Zs+qOpfKI8c11VpYHxxR4uSMIXECyCUEpdASNP5TmcRnMj9c3RtxsK3o
 CB4/Pjk5BA4svnzi2Aec/49ubkoSl0YKrmFyG7xDY+w=
 =pnqr
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

 - Remove mc13892 as a trivial device

 - Improve of_find_node_by_name() documentation

 - Fix unit test dtc warnings

 - Clean-ups of USB binding documentation

 - Fix potential NULL deref in of_pci_map_rid

* tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: trivial-devices: Remove fsl,mc13892
  of: Document exactly what of_find_node_by_name() puts
  of: unittest: disable interrupts_property warning
  of: unittest: let dtc generate __local_fixups__
  dt-bindings: usb: document hub and host-controller properties
  dt-bindings: usb: clean up compatible property
  dt-bindings: usb: fix reg-property port-number range
  dt-bindings: usb: fix example hub node name
  of/pci: Fix theoretical NULL dereference
2017-11-20 21:38:41 -10:00
Stephen Boyd 02a876b504 of: Document exactly what of_find_node_by_name() puts
It isn't clear if this function of_node_put()s the 'from'
argument, or the node it searches. Clearly indicate which
variable is touched. Fold in some more fixes from Randy too
because we're in the area.

Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-20 12:15:44 -06:00
Linus Torvalds 37cb8e1f8e DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
 
 - Code clean-up of overlay code and fixing for some long standing memory
   leak and race condition in applying overlays
 
 - Improvements to DT memory usage making sysfs/kobjects optional and
   skipping unflattening of disabled nodes. This is part of kernel
   tinification efforts.
 
 - Final piece of removing storing the full path for every DT node. The
   prerequisite conversion of printk's to use device_node format
   specifier happened in 4.14.
 
 - Sync with current upstream dtc. This brings additional checks to dtb
   compiling.
 
 - Binding doc tree wide removal of leading 0s from examples
 
 - RTC binding documentation adding missing devices and some
   consolidation of duplicated bindings
 
 - Vendor prefix documentation for nutsboard, Silicon Storage Technology,
   shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
   Opal Kelly, and Next Thing
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
 C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
 RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
 SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
 HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
 5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
 OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
 hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
 KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
 eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
 IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
 9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
 =jgpN
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...
2017-11-14 18:25:40 -08:00
Frank Rowand e0a58f3e08 of: overlay: remove a dependency on device node full_name
The "%pOF" printf format was recently added to print the
full name of a device tree node, with the intent of changing
the node full_name field to contain only the node name instead
of the full path of the node.

dup_and_fixup_symbol_prop() duplicates a property from the
"/__symbols__" node of an overlay device tree.  The value
of each duplicated property must be fixed up to include
the full path of a node in the live device tree.  The
current code uses the node's full_name for that purpose.
Update the code to use the "%pOF" printf format to
determine the node's full path.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17 20:47:37 -05:00
Rob Herring b56b5528f5 of: make kobject and bin_attribute support configurable
Having device_nodes be kobjects is only needed if sysfs or OF_DYNAMIC is
enabled. Otherwise, having a kobject in struct device_node is
unnecessary bloat in minimal kernel configurations.

Likewise, bin_attribute is only needed in struct property when sysfs is
enabled, so we can make it configurable too.

Tested-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16 13:37:38 -05:00
Rob Herring bd82bbf38c of: fix missing kobject init for !SYSFS && OF_DYNAMIC config
The ref counting is broken for OF_DYNAMIC when sysfs is disabled because
the kobject initialization is skipped. Only the properties
add/remove/update should be skipped for !SYSFS config.

Tested-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16 13:37:36 -05:00
Sergey Senozhatsky db179e0d0d of: do not leak console options
Do not strdup() console options. It seems that the only reason for
it to be strdup()-ed was a compilation warning: printk, UART and
console drivers, for some reason, expect char pointer instead of
const char pointer. So we can just pass `of_stdout_options', but
need to cast it to char pointer. A better fix would be to change
printk, console drivers and UART to accept const char `options';
but that will take time - there are lots of drivers to update.

The patch also fixes a possible memory leak: add_preferred_console()
can fail, but we don't kfree() options.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-12 12:22:04 -05:00
Sergei Shtylyov b0d9d92f9c of: base: use of_property_read_string()
of_alias_scan() can use of_property_read_string() -- using the modern DT API
adds some prop sanity checks as a bonus; it does add couple LoCs but only
because the original code violated the 80-column limit...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-24 09:50:34 -05:00
Sergei Shtylyov 8832963d89 of: base: use of_property_read_u32()
of_n_{addr|size}_cells() predate of_property_read_u32(), so they have to
basically open-code it. Using the modern DT API saves several LoCs and also
adds some prop sanity checks as a bonus...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-24 09:50:07 -05:00
Rob Herring 0d638a07d3 of: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-18 17:09:18 -05:00
Rob Herring a4485b545e Merge branch 'dt/property-move' into dt/next 2017-07-05 08:31:52 -05:00
Rob Herring b8ba92b101 Merge branch 'topic/of-graph-base' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into dt/property-move
OF graph changes for ALSA conflict with the move of graph functions into
property.c.
2017-07-05 08:24:05 -05:00
Rob Herring 27497e11b5 of: find_node_by_full_name rewrite to compare each level
find_node_by_full_name() does the same thing as of_find_node_by_path(),
but takes no locks and doesn't work on aliases. Refactor
of_find_node_opts_by_path() into __of_find_node_by_full_path() and
replace find_node_by_full_name() with it.

Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-22 12:38:29 -05:00
Rob Herring 95e6b1fa33 of: use kbasename instead of open coding
Several places in DT code open code the equivalent of kbasename.
Replace them.

The behavior for root nodes in node_name_cmp will be slightly different.
Instead of comparing "/", "" will be compared. The comparison will be
the same.

Reviewed-by: Andy Shevchenko <andy.shevhchenko@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-22 12:37:46 -05:00
Frank Rowand 7ace5f4806 of: be consistent in form of file mode
checkpatch whined about using S_IRUGO instead of octal equivalent
when adding phandle sysfs code, so used octal in that pending patch.
Change other instances of the S_* constants in the same file to
the octal form.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-22 11:16:44 -05:00
Sakari Ailus 1df09bc66f of: Move OF property and graph API from base.c to property.c
base.c contains both core OF functions and increasingly other
functionality such as accessing properties and graphs, including
convenience functions. In the near future this would also include OF
specific implementation of the fwnode property and graph APIs.

Create driver/of/property.c to contain procedures for accessing and
interpreting device tree properties. The procedures are moved from
drivers/of/base.c, with no changes other than copying only the includes
required by the moved procedures.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-01 08:50:45 -05:00
Kuninori Morimoto ac1e6958d3 of_graph: add of_graph_get_endpoint_count()
OF graph want to count its endpoint number, same as
of_get_child_count(). This patch adds of_graph_get_endpoint_count()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17 10:21:16 +01:00
Kuninori Morimoto 0ef472a973 of_graph: add of_graph_get_port_parent()
Linux kernel already has of_graph_get_remote_port_parent(),
but, sometimes we want to get own port parent.
This patch adds of_graph_get_port_parent()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17 10:21:12 +01:00