Commit Graph

208 Commits

Author SHA1 Message Date
Yong Zhang 1c09ab0d25 sched: Skip autogroup when looking for all rt sched groups
Since commit ec514c48 ("sched: Fix rt_rq runtime leakage bug")
'cat /proc/sched_debug' will print data of root_task_group.rt_rq
multiple times.

This is because autogroup does not have its own rt group, instead
rt group of autogroup is linked to root_task_group.

So skip it when we are looking for all rt sched groups, and it
will also save some noop operation against root_task_group when
__disable_runtime()/__enable_runtime().

-v2: Based on Cheng Xu's idea which uses less code.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Cheng Xu <chengxu@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/BANLkTi=87P3RoTF_UEtamNfc_XGxQXE__Q@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 10:39:08 +02:00
Ingo Molnar 36b2e922b5 Merge commit 'v3.0-rc5' into sched/core
Merge reason: Move to a (much) newer base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 10:34:24 +02:00
Steven Rostedt 0da938c449 sched: Check if lowest_mask is initialized in find_lowest_rq()
On system boot up, the lowest_mask is initialized with an
early_initcall(). But RT tasks may wake up on other
early_initcall() callers before the lowest_mask is initialized,
causing a system crash.

Commit "d72bce0e67 rcu: Cure load woes" was the first commit
to wake up RT tasks in early init. Before this commit this bug
should not happen.

Reported-by: Andrew Theurer <habanero@linux.vnet.ibm.com>
Tested-by: Andrew Theurer <habanero@linux.vnet.ibm.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110614223657.824872966@goodmis.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-15 11:44:48 +02:00
Hillf Danton 8dd0de8be3 sched: Fix need_resched() when checking peempt
The RT preempt check tests the wrong task if NEED_RESCHED is
set. It currently checks the local CPU task. It is supposed to
check the task that is running on the runqueue we are about to
wake another task on.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20110614223657.450239027@goodmis.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-15 09:50:32 +02:00
Ingo Molnar e197f094b7 Merge branch 'unlikely/sched' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into sched/urgent 2011-06-03 10:27:47 +02:00
Xiaotian Feng cd4ae6adf8 sched: More sched_domain iterations fixes
sched_domain iterations needs to be protected by rcu_read_lock() now,
this patch adds another two places which needs the rcu lock, which is
spotted by following suspicious rcu_dereference_check() usage warnings.

kernel/sched_rt.c:1244 invoked rcu_dereference_check() without protection!
kernel/sched_stats.h:41 invoked rcu_dereference_check() without protection!

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1303469634-11678-1-git-send-email-dfeng@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-28 17:02:54 +02:00
Linus Torvalds 80fe02b5da Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  sched: Fix and optimise calculation of the weight-inverse
  sched: Avoid going ahead if ->cpus_allowed is not changed
  sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
  sched: Remove unused parameters from sched_fork() and wake_up_new_task()
  sched: Shorten the construction of the span cpu mask of sched domain
  sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
  sched: Remove unused 'this_best_prio arg' from balance_tasks()
  sched: Remove noop in alloc_rt_sched_group()
  sched: Get rid of lock_depth
  sched: Remove obsolete comment from scheduler_tick()
  sched: Fix sched_domain iterations vs. RCU
  sched: Next buddy hint on sleep and preempt path
  sched: Make set_*_buddy() work on non-task entities
  sched: Remove need_migrate_task()
  sched: Move the second half of ttwu() to the remote cpu
  sched: Restructure ttwu() some more
  sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
  sched: Remove rq argument from ttwu_stat()
  sched: Remove rq->lock from the first half of ttwu()
  sched: Drop rq->lock from sched_exec()
  ...

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix rt_rq runtime leakage bug
2011-05-19 17:41:22 -07:00
Mike Galbraith 61eadef6a9 sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
If an RT task is awakened while it's rt_rq is throttled, the time between
wakeup/enqueue and unthrottle/selection may be accounted as rt_time
if the CPU is idle.  Set rq->skip_clock_update negative upon throttle
release to tell put_prev_task() that we need a clock update.

Reported-by: Thomas Giesel <skoe@directbox.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1304059010.7472.1.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-16 11:01:17 +02:00
Cheng Xu ec514c487c sched: Fix rt_rq runtime leakage bug
This patch is to fix the real-time scheduler bug reported at:

  https://lkml.org/lkml/2011/4/26/13

That is, when running multiple real-time threads on every logical CPUs
and then turning off one CPU, the kernel will bug at function
__disable_runtime().

Function __disable_runtime() bugs and reports leakage of rt_rq runtime.
The root cause is __disable_runtime() assumes it iterates through all
the existing rt_rq's while walking rq->leaf_rt_rq_list, which actually
contains only runnable rt_rq's. This problem also applies to
__enable_runtime() and print_rt_stats().

The patch is based on above analysis, appears to fix the problem, but is
only lightly tested.

Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cheng Xu <chengxu@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4DCE1F12.6040609@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-16 11:00:54 +02:00
Peter Zijlstra 7608dec2ce sched: Drop the rq argument to sched_class::select_task_rq()
In preparation of calling select_task_rq() without rq->lock held, drop
the dependency on the rq argument.

Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110405152729.031077745@chello.nl
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14 08:52:36 +02:00
Peter Zijlstra fd2f4419b4 sched: Provide p->on_rq
Provide a generic p->on_rq because the p->se.on_rq semantics are
unfavourable for lockless wakeups but needed for sched_fair.

In particular, p->on_rq is only cleared when we actually dequeue the
task in schedule() and not on any random dequeue as done by things
like __migrate_task() and __sched_setscheduler().

This also allows us to remove p->se usage from !sched_fair code.

Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.949545047@chello.nl
2011-04-14 08:52:35 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Ingo Molnar e0a92c1747 Merge branch 'sched/urgent' into sched/core
Merge reason: Add fixes before applying dependent patches.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-04 11:12:26 +01:00
Balbir Singh 0c3b916801 sched: Fix sched rt group scheduling when hierachy is enabled
The current sched rt code is broken when it comes to hierarchical
scheduling, this patch fixes two problems

1. It adds redundant enqueuing (harmless) when it finds a queue
   has tasks enqueued, but it has no run time and it is not
   throttled.

2. The most important change is in sched_rt_rq_enqueue/dequeue.
   The code just picks the rt_rq belonging to the current cpu
   on which the period timer runs, the patch fixes it, so that
   the correct rt_se is enqueued/dequeued.

Tested with a simple hierarchy

/c/d, c and d assigned similar runtimes of 50,000 and a while
1 loop runs within "d". Both c and d get throttled, without
the patch, the task just stops running and never runs (depends
on where the sched_rt b/w timer runs). With the patch, the
task is throttled and runs as expected.

[ bharata, suggestions on how to pick the rt_se belong to the
  rt_rq and correct cpu ]

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
LKML-Reference: <20110303113435.GA2868@balbir.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-04 11:03:18 +01:00
Ingo Molnar 48fa4b8ecf Merge commit 'v2.6.38-rc5' into sched/core
Merge reason: Pick up upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16 13:31:55 +01:00
Peter Zijlstra 06c3bc6556 sched: Fix update_curr_rt()
cpu_stopper_thread()
  migration_cpu_stop()
    __migrate_task()
      deactivate_task()
        dequeue_task()
          dequeue_task_rq()
            update_curr_rt()

Will call update_curr_rt() on rq->curr, which at that time is
rq->stop. The problem is that rq->stop.prio matches an RT prio and
thus falsely assumes its a rt_sched_class task.

Reported-Debuged-Tested-Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: stable@kernel.org # .37
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-03 12:21:33 +01:00
Peter Zijlstra da7a735e51 sched: Fix switch_from_fair()
When a task is taken out of the fair class we must ensure the vruntime
is properly normalized because when we put it back in it will assume
to be normalized.

The case that goes wrong is when changing away from the fair class
while sleeping. Sleeping tasks have non-normalized vruntime in order
to make sleeper-fairness work. So treat the switch away from fair as a
wakeup and preserve the relative vruntime.

Also update sysrq-n to call the ->switch_{to,from} methods.

Reported-by: Onkalo Samu <samu.p.onkalo@nokia.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-26 12:33:22 +01:00
Steven Rostedt 8e54a2c036 sched: Change pick_next_task_rt from unlikely to likely
The if (unlikely(!rt_rq->rt_nr_running)) test in pick_next_task_rt()
tests if there is another rt task ready to run. If so, then pick it.

In most systems, only one RT task runs at a time most of the time.
Running the branch unlikely annotator profiler on a system doing average
work "running firefox, evolution, xchat, distcc builds, etc", it showed the
following:

 correct incorrect  %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
  324344 135104992  99 _pick_next_task_rt             sched_rt.c           1064

99% of the time the condition is true. When an RT task schedules out,
it is unlikely that another RT task is waiting to run on that same run queue.

Simply remove the unlikely() condition.

Acked-by: Gregory Haskins <ghaskins@novell.com>
Cc:Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-12-13 19:55:15 -05:00
Yong Zhang 33c3d6c61d sched: Cleanup pre_schedule_rt
Since [commit 9a897c5a:
sched: RT-balance, replace hooks with pre/post schedule and wakeup methods]
we must call pre_schedule_rt if prev is rt task.
So condition rt_task(prev) is always true and the 'unlikely' declaration is
simply incorrect.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-12-13 15:02:46 -05:00
Peter Zijlstra 3d4b47b4b0 sched: Implement on-demand (active) cfs_rq list
Make certain load-balance actions scale per number of active cgroups
instead of the number of existing cgroups.

This makes wakeup/sleep paths more expensive, but is a win for systems
where the vast majority of existing cgroups are idle.

Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101115234937.666535048@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:27:47 +01:00
Venkatesh Pallipadi 305e6835e0 sched: Do not account irq time to current task
Scheduler accounts both softirq and interrupt processing times to the
currently running task. This means, if the interrupt processing was
for some other task in the system, then the current task ends up being
penalized as it gets shorter runtime than otherwise.

Change sched task accounting to acoount only actual task time from
currently running task. Now update_curr(), modifies the delta_exec to
depend on rq->clock_task.

Note that this change only handles CONFIG_IRQ_TIME_ACCOUNTING case. We can
extend this to CONFIG_VIRT_CPU_ACCOUNTING with minimal effort. But, thats
for later.

This change will impact scheduling behavior in interrupt heavy conditions.

Tested on a 4-way system with eth0 handled by CPU 2 and a network heavy
task (nc) running on CPU 3 (and no RSS/RFS). With that I have CPU 2
spending 75%+ of its time in irq processing. CPU 3 spending around 35%
time running nc task.

Now, if I run another CPU intensive task on CPU 2, without this change
/proc/<pid>/schedstat shows 100% of time accounted to this task. With this
change, it rightly shows less than 25% accounted to this task as remaining
time is actually spent on irq processing.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-7-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 20:52:26 +02:00
Peter Zijlstra 4924627423 sched: Unindent labels
Labels should be on column 0.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 18:41:56 +02:00
Steven Rostedt b3bc211cfe sched: Give CPU bound RT tasks preference
If a high priority task is waking up on a CPU that is running a
lower priority task that is bound to a CPU, see if we can move the
high RT task to another CPU first. Note, if all other CPUs are
running higher priority tasks than the CPU bounded current task,
then it will be preempted regardless.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Gregory Haskins <ghaskins@novell.com>
LKML-Reference: <20100921024138.888922071@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-21 13:57:12 +02:00
Steven Rostedt 43fa5460fe sched: Try not to migrate higher priority RT tasks
When first working on the RT scheduler design, we concentrated on
keeping all CPUs running RT tasks instead of having multiple RT
tasks on a single CPU waiting for the migration thread to move
them. Instead we take a more proactive stance and push or pull RT
tasks from one CPU to another on wakeup or scheduling.

When an RT task wakes up on a CPU that is running another RT task,
instead of preempting it and killing the cache of the running RT
task, we look to see if we can migrate the RT task that is waking
up, even if the RT task waking up is of higher priority.

This may sound a bit odd, but RT tasks should be limited in
migration by the user anyway. But in practice, people do not do
this, which causes high prio RT tasks to bounce around the CPUs.
This becomes even worse when we have priority inheritance, because
a high prio task can block on a lower prio task and boost its
priority. When the lower prio task wakes up the high prio task, if
it happens to be on the same CPU it will migrate off of it.

But in reality, the above does not happen much either, because the
wake up of the lower prio task, which has already been boosted, if
it was on the same CPU as the higher prio task, it would then
migrate off of it. But anyway, we do not want to migrate them
either.

To examine the scheduling, I created a test program and examined it
under kernelshark. The test program created CPU * 2 threads, where
each thread had a different priority. The program takes different
options. The options used in this change log was to have priority
inheritance mutexes or not.

All threads did the following loop:

static void grab_lock(long id, int iter, int l)
{
	ftrace_write("thread %ld iter %d, taking lock %d\n",
		     id, iter, l);
	pthread_mutex_lock(&locks[l]);
	ftrace_write("thread %ld iter %d, took lock %d\n",
		     id, iter, l);
	busy_loop(nr_tasks - id);
	ftrace_write("thread %ld iter %d, unlock lock %d\n",
		     id, iter, l);
	pthread_mutex_unlock(&locks[l]);
}

void *start_task(void *id)
{
	[...]
	while (!done) {
		for (l = 0; l < nr_locks; l++) {
			grab_lock(id, i, l);
			ftrace_write("thread %ld iter %d sleeping\n",
				     id, i);
			ms_sleep(id);
		}
		i++;
	}
	[...]
}

The busy_loop(ms) keeps the CPU spinning for ms milliseconds. The
ms_sleep(ms) sleeps for ms milliseconds. The ftrace_write() writes
to the ftrace buffer to help analyze via ftrace.

The higher the id, the higher the prio, the shorter it does the
busy loop, but the longer it spins. This is usually the case with
RT tasks, the lower priority tasks usually run longer than higher
priority tasks.

At the end of the test, it records the number of loops each thread
took, as well as the number of voluntary preemptions, non-voluntary
preemptions, and number of migrations each thread took, taking the
information from /proc/$$/sched and /proc/$$/status.

Running this on a 4 CPU processor, the results without changes to
the kernel looked like this:

Task        vol    nonvol   migrated     iterations
----        ---    ------   --------     ----------
  0:         53      3220       1470             98
  1:        562       773        724             98
  2:        752       933       1375             98
  3:        749        39        697             98
  4:        758         5        515             98
  5:        764         2        679             99
  6:        761         2        535             99
  7:        757         3        346             99

total:     5156       4977      6341            787

Each thread regardless of priority migrated a few hundred times.
The higher priority tasks, were a little better but still took
quite an impact.

By letting higher priority tasks bump the lower prio task from the
CPU, things changed a bit:

Task        vol    nonvol   migrated     iterations
----        ---    ------   --------     ----------
  0:         37      2835       1937             98
  1:        666      1821       1865             98
  2:        654      1003       1385             98
  3:        664       635        973             99
  4:        698       197        352             99
  5:        703       101        159             99
  6:        708         1         75             99
  7:        713         1          2             99

total:     4843       6594      6748            789

The total # of migrations did not change (several runs showed the
difference all within the noise). But we now see a dramatic
improvement to the higher priority tasks. (kernelshark showed that
the watchdog timer bumped the highest priority task to give it the
2 count. This was actually consistent with every run).

Notice that the # of iterations did not change either.

The above was with priority inheritance mutexes. That is, when the
higher prority task blocked on a lower priority task, the lower
priority task would inherit the higher priority task (which shows
why task 6 was bumped so many times). When not using priority
inheritance mutexes, the current kernel shows this:

Task        vol    nonvol   migrated     iterations
----        ---    ------   --------     ----------
  0:         56      3101       1892             95
  1:        594       713        937             95
  2:        625       188        618             95
  3:        628         4        491             96
  4:        640         7        468             96
  5:        631         2        501             96
  6:        641         1        466             96
  7:        643         2        497             96

total:     4458       4018      5870            765

Not much changed with or without priority inheritance mutexes. But
if we let the high priority task bump lower priority tasks on
wakeup we see:

Task        vol    nonvol   migrated     iterations
----        ---    ------   --------     ----------
  0:        115      3439       2782             98
  1:        633      1354       1583             99
  2:        652       919       1218             99
  3:        645       713        934             99
  4:        690         3          3             99
  5:        694         1          4             99
  6:        720         3          4             99
  7:        747         0          1            100

Which shows a even bigger change. The big difference between task 3
and task 4 is because we have only 4 CPUs on the machine, causing
the 4 highest prio tasks to always have preference.

Although I did not measure cache misses, and I'm sure there would
be little to measure since the test was not data intensive, I could
imagine large improvements for higher priority tasks when dealing
with lower priority tasks. Thus, I'm satisfied with making the
change and agreeing with what Gregory Haskins argued a few years
ago when we first had this discussion.

One final note. All tasks in the above tests were RT tasks. Any RT
task will always preempt a non RT task that is running on the CPU
the RT task wants to run on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Gregory Haskins <ghaskins@novell.com>
LKML-Reference: <20100921024138.605460343@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-21 13:57:12 +02:00
Oleg Nesterov c32b4fce79 sched: task_tick_rt: Remove the obsolete ->signal != NULL check
Remove the obsolete ->signal != NULL check in watchdog().
Since ea6d290c ->signal can't be NULL.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230948.GA25911@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-18 10:46:56 +02:00
Peter Zijlstra 371fd7e7a5 sched: Add enqueue/dequeue flags
In order to reduce the dependency on TASK_WAKING rework the enqueue
interface to support a proper flags field.

Replace the int wakeup, bool head arguments with an int flags argument
and create the following flags:

  ENQUEUE_WAKEUP - the enqueue is a wakeup of a sleeping task,
  ENQUEUE_WAKING - the enqueue has relative vruntime due to
                   having sched_class::task_waking() called,
  ENQUEUE_HEAD - the waking task should be places on the head
                 of the priority queue (where appropriate).

For symmetry also convert sched_class::dequeue() to a flags scheme.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:12:05 +02:00
Peter Zijlstra 0017d73509 sched: Fix TASK_WAKING vs fork deadlock
Oleg noticed a few races with the TASK_WAKING usage on fork.

 - since TASK_WAKING is basically a spinlock, it should be IRQ safe
 - since we set TASK_WAKING (*) without holding rq->lock it could
   be there still is a rq->lock holder, thereby not actually
   providing full serialization.

(*) in fact we clear PF_STARTING, which in effect enables TASK_WAKING.

Cure the second issue by not setting TASK_WAKING in sched_fork(), but
only temporarily in wake_up_new_task() while calling select_task_rq().

Cure the first by holding rq->lock around the select_task_rq() call,
this will disable IRQs, this however requires that we push down the
rq->lock release into select_task_rq_fair()'s cgroup stuff.

Because select_task_rq_fair() still needs to drop the rq->lock we
cannot fully get rid of TASK_WAKING.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:12:03 +02:00
Ingo Molnar c9494727cf Merge branch 'linus' into sched/core
Merge reason: update to latest upstream

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:03:08 +02:00
Linus Torvalds 80a186074e Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix pick_next_highest_task_rt() for cgroups
  sched: Cleanup: remove unused variable in try_to_wake_up()
  x86: Fix sched_clock_cpu for systems with unsynchronized TSC
2010-03-13 14:46:18 -08:00
Lucas De Marchi 41acab8851 sched: Implement group scheduler statistics in one struct
Put all statistic fields of sched_entity in one struct, sched_statistics,
and embed it into sched_entity.

This change allows to memset the sched_statistics to 0 when needed (for
instance when forking), avoiding bugs of non initialized fields.

Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1268275065-18542-1-git-send-email-lucas.de.marchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 15:22:28 +01:00
Peter Zijlstra 3d07467b7a sched: Fix pick_next_highest_task_rt() for cgroups
Since pick_next_highest_task_rt() already iterates all the cgroups and
is really only interested in tasks, skip over the !task entries.

Reported-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Dhaval Giani <dhaval.giani@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 15:21:50 +01:00
Jiri Slaby 78d7d407b6 kernel core: use helpers for rlimits
Make sure compiler won't do weird things with limits.  E.g.  fetching them
twice may return 2 different values after writable limits are implemented.

I.e.  either use rlimit helpers added in commit 3e10e716ab ("resource:
add helpers for fetching rlimits") or ACCESS_ONCE if not applicable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:33 -08:00
Yong Zhang 74b7eb5885 sched: Change usage of rt_rq->rt_se to rt_rq->tg->rt_se[cpu]
This is the first step to remove rt_rq member rt_se because it have the
same meaning with tg->rt_se[cpu]. And the latter style is also used by
the fair scheduling class.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <2674af741001282257r28c97a92o9f90cf16fe8d3d84@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04 09:57:32 +01:00
Thomas Gleixner 37dad3fce9 sched: Implement head queueing for sched_rt
The ability of enqueueing a task to the head of a SCHED_FIFO priority
list is required to fix some violations of POSIX scheduling policy.

Implement the functionality in sched_rt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Tested-by: Mathias Weber <mathias.weber.mw1@roche.com>
LKML-Reference: <20100120171629.772169931@linutronix.de>
2010-01-22 18:09:59 +01:00
Thomas Gleixner ea87bb7853 sched: Extend enqueue_task to allow head queueing
The ability of enqueueing a task to the head of a SCHED_FIFO priority
list is required to fix some violations of POSIX scheduling policy.

Extend the related functions with a "head" argument.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Tested-by: Mathias Weber <mathias.weber.mw1@roche.com>
LKML-Reference: <20100120171629.734886007@linutronix.de>
2010-01-22 18:09:59 +01:00
Peter Zijlstra 3d45fd804a sched: Remove the sched_class load_balance methods
Take out the sched_class methods for load-balancing.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21 13:40:09 +01:00
H Hartley Sweeten 6d686f4564 sched: Don't expose local functions
kernel/sched: don't expose local functions

The get_rr_interval_* functions are all class methods of
struct sched_class. They are not exported so make them
static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <201001132021.53253.hartleys@visionengravers.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-17 08:09:45 +01:00
Peter Zijlstra efbbd05a59 sched: Add pre and post wakeup hooks
As will be apparent in the next patch, we need a pre wakeup hook
for sched_fair task migration, hence rename the post wakeup hook
and one pre wakeup.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091216170518.114746117@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 19:01:58 +01:00
Thomas Gleixner 0986b11b12 sched: Convert rt_runtime_lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Thomas Gleixner 05fa785cf8 sched: Convert rq->lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Thomas Gleixner dba091b9e3 sched: Protect sched_rr_get_param() access to task->sched_class
sched_rr_get_param calls
task->sched_class->get_rr_interval(task) without protection
against a concurrent sched_setscheduler() call which modifies
task->sched_class.

Serialize the access with task_rq_lock(task) and hand the rq
pointer into get_rr_interval() as it's needed at least in the
sched_fair implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <alpine.LFD.2.00.0912090930120.3089@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09 10:01:07 +01:00
Rusty Russell e2c8806304 cpumask: Simplify sched_rt.c
find_lowest_rq() wants to call pick_optimal_cpu() on the
intersection of sched_domain_span(sd) and lowest_mask.  Rather
than doing a cpus_and into a temporary, we can open-code it.

This actually makes the code slightly clearer, IMHO.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <200911031453.15350.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 13:16:38 +01:00
Peter Williams 0d721ceadb sched: Simplify sys_sched_rr_get_interval() system call
By removing the need for it to know details of scheduling classes.

This allows PlugSched to define orthogonal scheduling classes.

Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 09:53:55 +02:00
Peter Zijlstra 7d47872146 sched: Rename sync arguments
In order to extend the functions to have more than 1 flag (sync),
rename the argument to flags, and explicitly define a WF_ space for
individual flags.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:30 +02:00
Peter Zijlstra 0763a660a8 sched: Rename select_task_rq() argument
In order to be able to rename the sync argument, we need to rename
the current flag argument.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:29 +02:00
Peter Zijlstra 5f3edc1b1e sched: Hook sched_balance_self() into sched_class::select_task_rq()
Rather ugly patch to fully place the sched_balance_self() code
inside the fair class.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:04 +02:00
Peter Zijlstra e9e9250bc7 sched: Scale down cpu_power due to RT tasks
Keep an average on the amount of time spend on RT tasks and use
that fraction to scale down the cpu_power for regular tasks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.287778431@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 10:09:55 +02:00
Ingo Molnar bcf08df3b2 sched: Fix cpupri build on !CONFIG_SMP
This build bug:

 In file included from kernel/sched.c:1765:
 kernel/sched_rt.c: In function ‘has_pushable_tasks’:
 kernel/sched_rt.c:1069: error: ‘struct rt_rq’ has no member named ‘pushable_tasks’
 kernel/sched_rt.c: In function ‘pick_next_task_rt’:
 kernel/sched_rt.c:1084: error: ‘struct rq’ has no member named ‘post_schedule’

Triggers because both pushable_tasks and post_schedule are
SMP-only fields.

Move pushable_tasks() to the SMP section and #ifdef the post_schedule use.

Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090729150422.17691.55590.stgit@dev.haskins.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 15:15:51 +02:00
Peter Zijlstra 8f48894fcc sched: Add debug check to task_of()
A frequent mistake appears to be to call task_of() on a
scheduler entity that is not actually a task, which can result
in a wild pointer.

Add a check to catch these mistakes.

Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 14:26:14 +02:00
Gregory Haskins 00aec93d10 sched: Fully integrate cpus_active_map and root-domain code
Reflect "active" cpus in the rq->rd->online field, instead of
the online_map.

The motivation is that things that use the root-domain code
(such as cpupri) only care about cpus classified as "active"
anyway. By synchronizing the root-domain state with the active
map, we allow several optimizations.

For instance, we can remove an extra cpumask_and from the
scheduler hotpath by utilizing rq->rd->online (since it is now
a cached version of cpu_active_map & rq->rd->span).

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090730145723.25226.24493.stgit@dev.haskins.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 14:26:12 +02:00