Commit Graph

1466 Commits

Author SHA1 Message Date
Linus Torvalds 4bdc1b9650 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: AMD 813x B2 devices do not need boot interrupt quirk
  PCI: Enable PCIe AER only after checking firmware support
  PCI: pciehp: Handle interrupts that happen during initialization.
  PCI: don't enable too many HT MSI mappings
  PCI: add some sysfs ABI docs
  PCI quirk: enable MSI on 8132
2009-02-26 14:43:42 -08:00
Stefan Assmann bbe194433b PCI: AMD 813x B2 devices do not need boot interrupt quirk
Turns out that the new AMD 813x devices do not need the
quirk_disable_amd_813x_boot_interrupt quirk to be run on them.  If it
is, no interrupts are seen on the PCI-X adapter.

From: Stefan Assmann <sassmann@novell.com>
Reported-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Tested-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-02-26 14:08:09 -08:00
Linus Torvalds 60042600c5 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix endless "Unknown DMAR structure type" loop
  VT-d: handle Invalidation Queue Error to avoid system hang
  intel-iommu: fix build error with INTR_REMAP=y and DMAR=n
2009-02-25 09:31:21 -08:00
Andrew Patterson 1f9f13c8d5 PCI: Enable PCIe AER only after checking firmware support
The PCIe port driver currently sets the PCIe AER error reporting bits for
any root or switch port without first checking to see if firmware will grant
control. This patch moves setting these bits to the AER service driver
aer_enable_port routine.  The bits are then set for the root port and any
downstream switch ports after the check for firmware support (aer_osc_setup)
is made. The patch also unsets the bits in a similar fashion when the AER
service driver is unloaded.

Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-02-24 09:47:46 -08:00
Eric W. Biederman dbc7e1e567 PCI: pciehp: Handle interrupts that happen during initialization.
Move the enabling of interrupts after all of the data structures
are setup so that we can safely run the interrupt handler as
soon as it is registered.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-02-24 09:36:56 -08:00
Yinghai Lu 1dec6b054d PCI: don't enable too many HT MSI mappings
Prakash reported that his c51-mcp51 ondie sound card doesn't work with
MSI.  But if he hacks out the HT-MSI quirk, MSI works fine.

So this patch reworks the nv_msi_ht_cap_quirk().  It will now only
enable ht_msi on own its root device, avoiding enabling it on devices
following that root dev.

Reported-by: Prakash Punnoor <prakash@punnoor.de>
Tested-by: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-02-24 09:34:31 -08:00
Yinghai Lu e0ae4f5503 PCI quirk: enable MSI on 8132
David reported that LSI SAS doesn't work with MSI.  It turns out that
his BIOS doesn't enable it, but the HT MSI 8132 does support HT MSI.
Add quirk to enable it

Cc: stable@kernel.org
Reported-by: David Lang <david@lang.hm>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-18 10:59:46 -08:00
Linus Torvalds 8ce9a75a30 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  iommu: fix Intel IOMMU write-buffer flushing
  futex: fix reference leak

Trivial conflicts fixed manually in drivers/pci/intel-iommu.c
2009-02-17 14:26:35 -08:00
Linus Torvalds c951aa62d5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Documentation: fix minor PCIe HOWTO thinko
  PCI: fix missing kernel-doc and typos
  PCI: fix struct pci_platform_pm_ops kernel-doc
  PCI: fix rom.c kernel-doc warning
  PCI/MSI: fix msi_mask() shift fix
2009-02-17 14:23:35 -08:00
David Woodhouse ca77fde8e6 Fix Intel IOMMU write-buffer flushing
This is the cause of the DMA faults and disk corruption that people have
been seeing. Some chipsets neglect to report the RWBF "capability" --
the flag which says that we need to flush the chipset write-buffer when
changing the DMA page tables, to ensure that the change is visible to
the IOMMU.

Override that bit on the affected chipsets, and everything is happy
again.

Thanks to Chris and Bhavesh and others for helping to debug.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Chris Wright <chrisw@sous-sol.org>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17 14:02:57 -08:00
David Woodhouse 9af88143b2 iommu: fix Intel IOMMU write-buffer flushing
This is the cause of the DMA faults and disk corruption that people have
been seeing. Some chipsets neglect to report the RWBF "capability" --
the flag which says that we need to flush the chipset write-buffer when
changing the DMA page tables, to ensure that the change is visible to
the IOMMU.

Override that bit on the affected chipsets, and everything is happy
again.

Thanks to Chris and Bhavesh and others for helping to debug.

Should resolve:

  https://bugzilla.redhat.com/show_bug.cgi?id=479996
  http://bugzilla.kernel.org/show_bug.cgi?id=12578

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-and-acked-by: Chris Wright <chrisw@sous-sol.org>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 22:47:09 +01:00
Tony Battersby 084eb960e8 intel-iommu: fix endless "Unknown DMAR structure type" loop
I have a SuperMicro C2SBX motherboard with BIOS revision 1.0b.  With vt-d
enabled in the BIOS, Linux gets into an endless loop printing
"DMAR:Unknown DMAR structure type" when booting.  Here is the DMAR ACPI
table:

DMAR @ 0x7fe86dec
  0000: 44 4d 41 52 98 00 00 00 01 6f 49 6e 74 65 6c 20  DMAR.....oIntel
  0010: 4f 45 4d 44 4d 41 52 20 00 00 04 06 4c 4f 48 52  OEMDMAR ....LOHR
  0020: 01 00 00 00 23 00 00 00 00 00 00 00 00 00 00 00  ....#...........
  0030: 01 00 58 00 00 00 00 00 00 a0 e8 7f 00 00 00 00  ..X.............
  0040: ff ff ef 7f 00 00 00 00 01 08 00 00 00 00 1d 00  ................
  0050: 01 08 00 00 00 00 1d 01 01 08 00 00 00 00 1d 02  ................
  0060: 01 08 00 00 00 00 1d 07 01 08 00 00 00 00 1a 00  ................
  0070: 01 08 00 00 00 00 1a 01 01 08 00 00 00 00 1a 02  ................
  0080: 01 08 00 00 00 00 1a 07 01 08 00 00 00 00 1a 07  ................
  0090: c0 00 68 00 04 10 66 60                          ..h...f`

Here are the messages printed by the kernel:

DMAR:Host address width 36
DMAR:RMRR base: 0x000000007fe8a000 end: 0x000000007fefffff
DMAR:Unknown DMAR structure type
DMAR:Unknown DMAR structure type
DMAR:Unknown DMAR structure type
...

Although I not very familiar with ACPI, to me it looks like struct
acpi_dmar_header::length == 0x0058 is incorrect, causing
parse_dmar_table() to look at an invalid offset on the next loop.  This
offset happens to have struct acpi_dmar_header::length == 0x0000, which
prevents the loop from ever terminating.  This patch checks for this
condition and bails out instead of looping forever.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-14 08:33:34 +00:00
Randy Dunlap f5ddcac435 PCI: fix missing kernel-doc and typos
Fix pci kernel-doc parameter missing notation, correct
function name, and fix typo:

Warning(linux-2.6.28-git10//drivers/pci/pci.c:1511): No description found for parameter 'exclusive'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13 12:03:08 -08:00
Randy Dunlap b33bfdef24 PCI: fix struct pci_platform_pm_ops kernel-doc
Fix struct pci_platform_pm_ops kernel-doc notation.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13 12:02:47 -08:00
Randy Dunlap 4cc59c721c PCI: fix rom.c kernel-doc warning
Fix PCI kernel-doc warning:

Warning(linux-2.6.29-rc4-git1/drivers/pci/rom.c:67): No description found for parameter 'pdev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13 12:01:56 -08:00
Matthew Wilcox 0b49ec37a2 PCI/MSI: fix msi_mask() shift fix
Hidetoshi Seto points out that commit
bffac3c593 has wrong values in the array.
Rather than correct the array, we can just use a bounds check and
perform the calculation specified in the comment.  As a bonus, this will
not run off the end of the array if the device specifies an illegal
value in the MSI capability.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13 11:59:03 -08:00
Linus Torvalds 9ce04f9238 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ptrace, x86: fix the usage of ptrace_fork()
  i8327: fix outb() parameter order
  x86: fix math_emu register frame access
  x86: math_emu info cleanup
  x86: include correct %gs in a.out core dump
  x86, vmi: put a missing paravirt_release_pmd in pgd_dtor
  x86: find nr_irqs_gsi with mp_ioapic_routing
  x86: add clflush before monitor for Intel 7400 series
  x86: disable intel_iommu support by default
  x86: don't apply __supported_pte_mask to non-present ptes
  x86: fix grammar in user-visible BIOS warning
  x86/Kconfig.cpu: make Kconfig help readable in the console
  x86, 64-bit: print DMI info in the oops trace
2009-02-11 08:23:22 -08:00
Yu Zhao 704126ad81 VT-d: handle Invalidation Queue Error to avoid system hang
When hardware detects any error with a descriptor from the invalidation
queue, it stops fetching new descriptors from the queue until software
clears the Invalidation Queue Error bit in the Fault Status register.
Following fix handles the IQE so the kernel won't be trapped in an
infinite loop.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-09 11:03:17 +00:00
Joerg Roedel 43f7392ba9 intel-iommu: fix build error with INTR_REMAP=y and DMAR=n
This fix should be safe since iommu->agaw is only used in intel-iommu.c.
And this file is only compiled with DMAR=y.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-09 10:00:53 +00:00
Kyle McMartin 0cd5c3c80a x86: disable intel_iommu support by default
Due to recurring issues with DMAR support on certain platforms.
There's a number of filesystem corruption incidents reported:

  https://bugzilla.redhat.com/show_bug.cgi?id=479996
  http://bugzilla.kernel.org/show_bug.cgi?id=12578

Provide a Kconfig option to change whether it is enabled by
default.

If disabled, it can still be reenabled by passing intel_iommu=on to the
kernel. Keep the .config option off by default.

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 16:48:38 +01:00
Rafael J. Wysocki 5294e25671 PCI PM: make the PM core more careful with drivers using the new PM framework
Currently, the PM core always attempts to manage devices with drivers
that use the new PM framework.  In particular, it attempts to disable
the devices (which is unnecessary), to save their state (which may be
undesirable if the driver has done that already) and to put them into
low power states (again, this may be undesirable if the driver has
already put the device into a low power state).  That need not be
the right thing to do, so make the core be more careful in this
respect.

Generally, there are the following categories of devices to consider:
* bridge devices without drivers
* non-bridge devices without drivers
* bridge devices with drivers
* non-bridge devices with drivers
and each of them should be handled differently.

For bridge devices without drivers the PCI PM core will save their
state on suspend and restore it (early) during resume, after putting
them into D0 if necessary.  It will not attempt to do anything else
to these devices.

For non-bridge devices without drivers the PCI PM core will disable
them and save their state on suspend.  During resume, it will put
them into D0, if necessary, restore their state (early) and reenable
them.

For bridge devices with drivers the PCI PM core will only save
their state on suspend if the driver hasn't done that already.
Still, the core will restore their state (early) during resume,
after putting them into D0, if necessary.

For non-bridge devices with drivers the PCI PM core will only save
their state on suspend if the driver hasn't done that already.  Also,
if the state of the device hasn't been saved by the driver, the core
will attempt to put the device into a low power state.  During
resume the core will restore the state of the device (early), after
putting it into D0, if necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:22:35 -08:00
Rafael J. Wysocki 49c968111a PCI PM: Read power state from device after trying to change it on resume
pci_restore_standard_config() unconditionally changes current_state
to PCI_D0 after attempting to change the device's power state, but
it should rather read the actual current power state from the
device.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:22:28 -08:00
Rafael J. Wysocki cbbc2f6b0d PCI PM: Do not disable and enable bridges during suspend-resume
It is a mistake to disable and enable PCI bridges and PCI Express
ports during suspend-resume, at least at the time when it is
currently done.  Disabling them may lead to problems with accessing
devices behind them and they should be automatically enabled when
their standard config spaces are restored.  Fix this by not attempting
to disable bridges during suspend and enable them during resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:21:26 -08:00
Rafael J. Wysocki 27be54a65c PCI: PCIe portdrv: Simplify suspend and resume
Simplify suspend and resume of the PCI Express port driver.  It no
longer needs to save and restore the standard configuration space of the
device; this is now done by the PCI PM core layer.

This patch is reported to fix the regression tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12598

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:21:19 -08:00
Rafael J. Wysocki 99dadce875 PCI PM: Fix saving of device state in pci_legacy_suspend
Make pci_legacy_suspend() save the state of the device if it is
in PCI_UNKNOWN after its suspend callback has run and warn only if
the power state of the device has been changed by its suspend
callback.

Also, use WARN_ONCE(), which is more useful, in pci_legacy_suspend(),
so that the name of the offending function is printed.

Additionally, remove the unnecessary line of code setting
pci_dev->state_saved.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:21:08 -08:00
Rafael J. Wysocki 144a76bc88 PCI PM: Check if the state has been saved before trying to restore it
Check if the standard configuration registers of a PCI device have
been saved during suspend before trying to restore them during
resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-By: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:20:39 -08:00
Rafael J. Wysocki ddb7c9d29f PCI PM: Fix handling of devices without drivers
Suspend to RAM is reported to break on some machines as a result of
attempting to put one of driverless PCI devices into a low power
state.  Avoid that by not attepmting to power manage driverless
devices during suspend.

Fix up pci_pm_poweroff() after a previous incomplete fix for the same
thing during hibernation.

This patch is reported to fix the regression from 2.6.28 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12605

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:20:09 -08:00
Timothy S. Nelson 97c44836cd PCI: return error on failure to read PCI ROMs
This patch makes the ROM reading code return an error to user space if
the size of the ROM read is equal to 0.

The patch also emits a warnings if the contents of the ROM are invalid,
and documents the effects of the "enable" file on ROM reading.

Signed-off-by: Timothy S. Nelson <wayland@wayland.id.au>
Acked-by: Alex Villacis-Lasso <a_villacis@palosanto.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 16:58:41 -08:00
Alex Chiang 3419c75e15 PCI: properly clean up ASPM link state on device remove
We only want to disable ASPM when the last function is removed from
the parent's device list. We determine this by checking to see if
the parent's device list is completely empty.

Unfortunately, we never hit that code because the parent is considered
an upstream port, and never had an ASPM link_state associated with it.

The early check for !link_state causes us to return early, we never
discover that our device list is empty, and thus we never remove the
downstream ports' link_state nodes.

Instead of checking to see if the parent's device list is empty, we can
check to see if we are the last device on the list, and if so, then we
know that we can clean up properly.

Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 16:58:40 -08:00
Matthew Garrett 71a082efc9 PCI hotplug: Change link order of pciehp & acpiphp
Some hardware exposes PCIE slots in such a way that they can be claimed
by either the acpiphp or pciehp driver. pciehp is the preferred driver
if the firmware allows the OS to claim control via the _OSC method so
should be loaded first - if it fails to bind (either due to a missing
_OSC method or the firmware refusing to hand off control) then we can
fall back to acpiphp or a vendor-specific driver.

This patch simply changes the link order to ensure that pciehp will be
initialised before acpiphp if both are statically built into the kernel.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 15:35:51 -08:00
Darrick J. Wong bf4162bcf8 PCI hotplug: fakephp: Allocate PCI resources before adding the device
For PCI devices, pci_bus_assign_resources() must be called to set up the
pci_device->resource array before pci_bus_add_devices() can be called, else
attempts to load drivers results in BAR collision errors where there are none.
This is not done in fakephp, so devices can be "unplugged" but scanning the
parent bus won't bring the devices back due to resource unallocation.  Move the
pci_bus_add_device-calling logic into pci_rescan_bus and preface it with a call
to pci_bus_assign_resources so that we only have to (re)allocate resources once
per bus where a new device is found.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 10:53:24 -08:00
Matthew Wilcox bffac3c593 PCI MSI: Fix undefined shift by 32
Add an msi_mask() function which returns the correct bitmask for the
number of MSI interrupts you have.  This fixes an undefined bug in
msi_capability_init().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:53:25 -08:00
Rafael J. Wysocki 476e7faefc PCI PM: Do not wait for buses in B2 or B3 during resume
pci_restore_standard_config() adds extra delay for PCI buses in
low power states (B2 or B3), but this is only correct for buses in
B2, because the buses in B3 are reset when they are put back into
B0.  Thus we should wait for such buses to settle after the reset,
but it's not a good idea to wait that long (1.1 s) with interrupts
off.

On the other hand, we have never waited for buses in B2 and B3
during resume and it seems reasonable to go back to this well
tested behaviour.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:47:10 -08:00
Rafael J. Wysocki 48f67f54a5 PCI PM: Power up devices before restoring their state
Devices that have MSI-X enabled before suspend to RAM or hibernation
and that are in a low power state during resume will not be handled
correctly by pci_restore_standard_config().  Namely, it first calls
pci_restore_state() which calls pci_restore_msi_state(), which in turn
executes __pci_restore_msix_state() that accesses the device's memory
space to restore the contents of the MSI-X table.  However, if the
device is in a low power state at this point, it's memory space is
not accessible.

The easiest way to fix this potential problem is to make
pci_restore_standard_config() call pci_restore_state() after
it has put the device into the full power state, D0.  Fortunately,
all of this is done with interrupts off, so the change of ordering
should not cause any trouble.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:47:02 -08:00
Rafael J. Wysocki 545ffd58ad PCI PM: Fix hibernation breakage on EeePC 701
Hibernation breaks on EeePC 701 as a result of attempting to put one
of its (driverless) devices into a low power state.  Avoid that by
not attepmting to power manage driverless devices during hibernation.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:46:27 -08:00
Rafael J. Wysocki 418e4da33f PCI PM: Fix suspend error paths and testing facility breakage
If one of device drivers refuses to suspend by returning error code
from its ->suspend() callback, the devices that have already been
suspended are resumed by executing their drivers' ->resume()
callbacks.  Some of these callbacks expect the device's
configuration space to be restored if the device has been put into
D3 before they are called.  Unfortunately, this mechanism has been
broken by recent changes moving the restoration of config spaces
of some devices (most importantly, USB controllers and HDA Intel)
into the resume callbacks executed with interrupts off.  Obviously,
these callbacks are not invoked in the suspend error path and, as a
result, the system cannot be successfully brought back into the
working state in case of a suspend error.  The same thing happens
in the hibernation error path right before putting the system into
S4.

Similarly, the suspend testing facility associated with the
/sys/power/pm_test file is broken, because it uses the very same
mechanism that is used in the suspend and hibernation error paths.

Fix the breakage by making the PCI core restore the configuration
spaces of PCI devices that haven't been restored already before
pci_pm_resume() is called for those devices by the PM core.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:45:46 -08:00
Linus Torvalds 4a4565921a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI hotplug: fix lock imbalance in pciehp
  PCI PM: Restore standard config registers of all devices early
  PCI/MSI: bugfix/utilize for msi_capability_init()
2009-01-26 10:13:36 -08:00
Jiri Slaby c2fdd36b55 PCI hotplug: fix lock imbalance in pciehp
set_lock_status omits mutex_unlock in fail path. Add the omitted
unlock.

As a result a lockup caused by this can be triggered from userspace
by writing 1 to /sys/bus/pci/slots/.../lock often enough.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-19 10:55:54 -08:00
Rafael J. Wysocki aa8c6c9374 PCI PM: Restore standard config registers of all devices early
There is a problem in our handling of suspend-resume of PCI devices that
many of them have their standard config registers restored with
interrupts enabled and they are put into the full power state with
interrupts enabled as well.  This may lead to the following scenario:
  * an interrupt vector is shared between two or more devices
  * one device is resumed earlier and generates an interrupt
  * the interrupt handler of another device tries to handle it and
    attempts to access the device the config space of which hasn't been
    restored yet and/or which still is in a low power state
  * the system crashes as a result

To prevent this from happening we should restore the standard
configuration registers of all devices with interrupts disabled and we
should put them into the D0 power state right after that.
Unfortunately, this cannot be done using the existing
pci_set_power_state(), because it can sleep.  Also, to do it we have to
make sure that the config spaces of all devices were actually saved
during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-16 12:57:58 -08:00
Hidetoshi Seto 0db29af1e7 PCI/MSI: bugfix/utilize for msi_capability_init()
This patch fix a following bug and does a cleanup.

bug:
	commit 5993760f7f
	had a wrong change (since is_64 is boolean[0|1]):

-               pci_write_config_dword(dev,
-                       msi_mask_bits_reg(pos, is_64bit_address(control)),
-                       maskbits);
+               pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);

utilize:
	Unify separated if (entry->msi_attrib.maskbit) statements.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: "Jike Song" <albcamus@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-16 12:35:25 -08:00
James Bottomley d45e085548 ACPI PCI hotplug: harden against panic regression
ACPI hotplug panic with current git head
http://lkml.org/lkml/2009/1/10/136

Rather than reverting the entire commit that causes the crash:
e8c331e963
"PCI hotplug: introduce functions for ACPI slot detection"

simply harden against it while the changes to
the hotplug code on this particularl machine are understood.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16 15:20:00 -05:00
Linus Torvalds 50246dd41c Revert "PCI PM: Register power state of devices during initialization"
This reverts commit 98e6e286d7, as Yinghai
Lu reports that it breaks kexec with at least the e1000 and e1000e
drivers.  The reason is that the shutdown sequence puts the hardware
into D3 sleep, and the commit causes us to claim that it then is in D0
(running) state just because we don't understand the PM capabilities.

Which then later makes "pci_set_power_state()" not do anything, and the
device never wakes up properly and just returns 0xff to everything.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: From: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-16 08:14:51 -08:00
Heiko Carstens c4ea37c26a [CVE-2009-0029] System call wrappers part 26
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:29 +01:00
Dirk Hohndel 288e4877f9 Prevent oops at boot with VT-d
With some broken BIOSs when VT-d is enabled, the data structures are
filled incorrectly. This can cause a NULL pointer dereference in very
early boot.

Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com>
Acked-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-13 08:03:46 -08:00
Linus Torvalds 4e9b1c184c Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  [IA64] fix typo in cpumask_of_pcibus()
  x86: fix x86_32 builds for summit and es7000 arch's
  cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs
  cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
  cpumask: use cpumask_var_t in acpi-cpufreq.c
  cpumask: use work_on_cpu in acpi/cstate.c
  cpumask: convert struct cpufreq_policy to cpumask_var_t
  cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t
  x86: cleanup remaining cpumask_t ops in smpboot code
  cpumask: update pci_bus_show_cpuaffinity to use new cpumask API
  cpumask: update local_cpus_show to use new cpumask API
  ia64: cpumask fix for is_affinity_mask_valid()
2009-01-10 06:12:18 -08:00
Len Brown b2576e1d44 Merge branch 'linus' into release 2009-01-09 03:39:43 -05:00
Rafael J. Wysocki f6dc1e5e3d PCI PM: Put PM callbacks in the order of execution
Put PM callbacks in drivers/pci/pci-driver.c in the order in which
they are executed which makes it much easier to follow the code.

No functional changes should result from this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:19:43 -08:00
Rafael J. Wysocki d67e37d793 PCI PM: Run default PM callbacks for all devices using new framework
It should be quite clear that it generally makes sense to execute
the default PM callbacks (ie. the callbacks used for handling
suspend, hibernation and resume of PCI devices without drivers) for
all devices.  Of course, the drivers that provide legacy PCI PM
support (ie. the ->suspend, ->suspend_late, ->resume_early
or ->resume hooks in the pci_driver structure), carry out these
operations too, so we can't do it for devices with such drivers.
Still, we can make the default PM callbacks run for devices with
drivers using the new framework (ie. implement the pm object), since
there are no such drivers at the moment.

This also simplifies the code and makes it smaller.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:19:39 -08:00
Rafael J. Wysocki 98e6e286d7 PCI PM: Register power state of devices during initialization
Use the observation that the power state of a PCI device can be
loaded into its pci_dev structure as soon as pci_pm_init() is run for
it and make that happen.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:18:04 -08:00
Rafael J. Wysocki ad8cfa1def PCI PM: Call pci_fixup_device from legacy routines
The size of drivers/pci/pci-driver.c can be reduced quite a bit
if pci_fixup_device() is called from the legacy PM callbacks, so make
it happen.

No functional changes should result from this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:17:23 -08:00