Commit Graph

196 Commits

Author SHA1 Message Date
Srinivas Kandagatla a94fafb7be clk: gcc-msm8916: add support to 9.6MHz codec clk
MCLK for internal audio codec is expected to be at 9.6MHz by default.
This patch adds support to 9.6MHz to make the default case possible.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19 17:43:49 -07:00
Abhishek Sahu 371a950745 clk: qcom: Add ipq8074 Global Clock Controller support
This patch adds support for the global clock controller found on
the ipq8074 based devices. This includes UART, I2C, SPI etc.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19 17:29:41 -07:00
Linus Torvalds b5a53b61a2 Sort of on the quieter side this time, which is probably due more
to me not catching up as quickly on patch review than anything else.
 Overall it seems normal though, a few small changes to the core, mostly
 small non-critical fixes here and there as well as driver updates for new
 and existing hardware support. The biggest things are the TI clk driver
 rework to lay the groundwork for clkctrl support in the next merge window
 and the AmLogic audio/graphics clk support.
 
 Core:
  * clk_possible_parents debugfs file so we know which parents a clk
    could possibly have
  * Fix to make clk rate change notifiers stop on the first failure instead
    of continuing
 
 New Drivers:
  * Mediatek MT6797 SoCs
  * hi655x PMIC clks
  * AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
  * Allwinner H5 SoCs and PRCM hardware
 
 Updates:
  * Nvidia Tegra T210 cleanups and non-critical fixes
  * TI OMAP cleanups in preparation for clkctrl support
  * Trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
  * ZTE zx296718 SoC VGA clks
  * Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
  * Support for IDT VersaClock 5P49V5935
  * Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJZE0YJAAoJEK0CiJfG5JUl9tEQAKVJx8VztYGt1REoFMtEEHmO
 azhxT/uYGgdOMAr9a3mQxqfm5cJbjnb1EZj2RfC1XHs31BF66j40y9+5d8hY8Hzu
 5IkY86s77TlqxGLwQcAsU75Q9cFrEW9X0KJ6OSzlrcc5hKlAEk/Z5lBKoQAm3mlU
 JqD4DSyFqP0X3YSxV5R7yfarb/X3ekCiQ13EDrPRRhyvHUi6ReUJDDgbPHtA+O2c
 ftLAARmxjzitzyvdXokXudkfNm8F5KePK+QkVikf6D/q+kx1D0BNJwZIjhpoiksn
 z6LImLQ8l91AWghmqqpOFXolxQncPU+bJIL9Pox76p5b3EzbQuthIafiso8KsDST
 4g3mHm42Yfx9uoF+U+pR8IeZfj5yQT91bvf8naPz/ngWMAlLP1IKJUvJN6jeTiwe
 cO6GIec1OH40Xl7v/9EafMwDcnFG0cwQmzr/M6wi1dUlmbSygP9NOMTHlr6W/0wa
 K2hCD6b5UHEgHmdfiJbZ2tKxLO0e8LABW+AU8fQH5S2eNe14vY0GvCzfAq5MArIz
 QRpso/kdtGpTpwMEvV6PUmJ0IxYEjtNJVjGJYbORwios0SK0Xl6bJWf7gwn5crB6
 nua9tVZtJEOHJS7S+ESp3VvuXj2/UGPoRRf5OsERo1S6ydGUQH+wDi1SJMdo/vtX
 bIPzIw6WPxMp24JyKOhh
 =/5a/
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "Sort of on the quieter side this time, which is probably due more to
  me not catching up as quickly on patch review than anything else.
  Overall it seems normal though, a few small changes to the core,
  mostly small non-critical fixes here and there as well as driver
  updates for new and existing hardware support.

  The biggest things are the TI clk driver rework to lay the groundwork
  for clkctrl support in the next merge window and the AmLogic
  audio/graphics clk support.

  Core:
   - clk_possible_parents debugfs file so we know which parents a clk
     could possibly have
   - Fix to make clk rate change notifiers stop on the first failure
     instead of continuing

  New Drivers:
   - Mediatek MT6797 SoCs
   - hi655x PMIC clks
   - AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
   - Allwinner H5 SoCs and PRCM hardware

  Updates:
   - Nvidia Tegra T210 cleanups and non-critical fixes
   - TI OMAP cleanups in preparation for clkctrl support
   - trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
   - ZTE zx296718 SoC VGA clks
   - Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
   - IDT VersaClock 5P49V5935 support
   - Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
     support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
  clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
  clk: ti: divider: try to fix ti_clk_register_divider
  clk: mvebu: Use kcalloc() in two functions
  clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
  clk: nomadik: Delete error messages for a failed memory allocation in two functions
  clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
  clk: Improve a size determination in two functions
  clk: Replace four seq_printf() calls by seq_putc()
  clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
  clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
  clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
  reset: mediatek: Add MT2701 ethsys reset controller include file
  clk: mediatek: add mt2701 ethernet reset
  clk: hi6220: Add the hi655x's pmic clock
  clk: ti: fix building without legacy omap3
  clk: ti: fix linker error with !SOC_OMAP4
  clk: hi3620: Fix a typo in one variable name
  clk: hi3620: Delete error messages for a failed memory allocation in two functions
  clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
  clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
  ...
2017-05-10 13:38:18 -07:00
Stephen Boyd ad61dd303a scripts/spelling.txt: add regsiter -> register spelling mistake
This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Stanimir Varbanov 4a43e35d19 clk: qcom: add parent for venus core0 and core1 gdsc's
Make venus_gdsc parent of venus gdsc core0 and core1.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-19 09:55:58 -07:00
Srinivas Kandagatla 46a7253df4 clk: qcom: clk-smd-rpm: fix rate for branch clks during handoff
rpm branch clk rate should requested as either 0 or 1 but not INT_MAX.
This patch fixes rate request for branch clocks during clk handoff.

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-19 09:50:26 -07:00
Rajendra Nayak a62ca337b3 clk: qcom: msm8996: Fix the vfe1 powerdomain name
Fix a typo which caused both vfe0 and vfe1 powerdomains to be
named as vfe0.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: 7e824d5079 ("clk: qcom: gdsc: Add mmcc gdscs for msm8996 family")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-04-12 18:50:57 +02:00
Guenter Roeck 6ff8ec98e1 clk: qcom: Do not drop device node twice
of_find_node_by_name() drops the reference to a passed device node.
It is not necessary to drop it again, and doing so may result in the
device node being released prematurely.

Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fixes: ee15faffef ("clk: qcom: common: Add API to register board clocks backwards compatibly")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-02-15 17:17:55 -08:00
Jeremy McNicoll eaff16bc49 clk: qcom: SDHCI enablement on Nexus 5X / 6P
Add missing clock branch to enable onboard storage
for msm899(2/4).

Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-27 13:33:05 -08:00
Rajendra Nayak 843be1e7fb clk: qcom: gdsc: Fix handling of hw control enable/disable
Once a gdsc is brought in and out of HW control, there is a
power down and up cycle which can take upto 1us. Polling on
the gdsc status immediately after the hw control enable/disable
can mislead software/firmware to belive the gdsc is already either on
or off, while its yet to complete the power cycle.
To avoid this add a 1us delay post a enable/disable of HW control
mode.

Also after the HW control mode is disabled, poll on the status to
check gdsc status reflects its 'on' before force disabling it
in software.

Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: 904bb4f5c7 ("clk: qcom: gdsc: Add support for gdscs with HW control")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26 16:00:38 -08:00
Zoran Markovic 8e18d06589 clk: mdm9615: Add EBI2 clock
Add definition of EBI2 clock used by MDM9615 NAND controller.

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
[sboyd@codeaurora.org: ebi2_clk halt bit is 24 not 23]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09 16:33:26 -08:00
Avaneesh Kumar Dwivedi 4263499a6e clk: qcom: Add GCC_MSS_RESET support
Add support to use reset control framework for resetting MSS
with hexagon v56 1.5.0.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09 16:06:43 -08:00
Stephen Boyd 2df2b82b7e Merge branches 'clk-qcom-rpm8974', 'clk-stm32f4', 'clk-ipq4019' and 'clk-fixes' into clk-next
* clk-qcom-rpm8974:
  clk: qcom: smd-rpmcc: Add msm8974 clocks

* clk-stm32f4:
  clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board
  clk: stm32f4: Add SAI clocks
  clk: stm32f4: Add I2S clock
  clk: stm32f4: Add lcd-tft clock
  clk: stm32f4: Add post divisor for I2S & SAI PLLs
  clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
  clk: stm32f4: Update DT bindings documentation

* clk-ipq4019:
  clk: qcom: ipq4019: Add the cpu clock frequency change notifier
  clk: qcom: ipq4019: Add all the frequencies for apss cpu
  clk: qcom: ipq4019: correct sdcc frequency and parent name
  clk: qcom: ipq4019: Add the nodes for pcnoc
  clk: qcom: ipq4019: Add the apss cpu pll divider clock node
  clk: qcom: ipq4019: remove fixed clocks and add pll clocks

* clk-fixes:
  clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method
  clk: renesas: mstp: Support 8-bit registers for r7s72100
2017-01-09 16:06:11 -08:00
Abhishek Sahu 395717ee0d clk: qcom: ipq4019: Add the cpu clock frequency change notifier
The current driver code gives the crash or gets hang while switching
the CPU frequency some time. The APSS CPU Clock divider is not glitch
free so it the APPS clock need to be switched for stable clock during
the change.

This patch adds the frequency change notifier for APSS CPU clock. It
changes the parent of this clock to stable PLL FEPLL500 for
PRE_RATE_CHANGE event. This event will be generated before actual
clock set operations. The clock set operation will again change its
corresponding parent by getting the same from frequency table.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
[sboyd@codeaurora.org: Indent less in probe]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-27 13:44:34 -08:00
Bjorn Andersson 685dc94b7d clk: qcom: smd-rpmcc: Add msm8974 clocks
This adds all RPM based clocks for msm8974, except cxo and
gfx3d_clk_src.

Tested-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 16:04:35 -08:00
Abhishek Sahu 86c654d41a clk: qcom: ipq4019: Add all the frequencies for apss cpu
The APSS CPU clock does not contain all the frequencies in its
frequency table so this patch adds the same.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:29 -08:00
Abhishek Sahu b52a0c2c11 clk: qcom: ipq4019: correct sdcc frequency and parent name
1. The parent for sdcc clock is sdccpll.
2. The frequency value was wrong so modified the same.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:28 -08:00
Abhishek Sahu 5c1a96935f clk: qcom: ipq4019: Add the nodes for pcnoc
The current ipq4019 clock driver does not have the node for
PCNOC so this patch adds and registers the PCNOC clock nodes.
This PCNOC clock is critical and should not be turned off so
setting CRITICAL flag also.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:27 -08:00
Abhishek Sahu d83dcacea1 clk: qcom: ipq4019: Add the apss cpu pll divider clock node
The current ipq4019 clock driver does not have support for all
the frequency supported by APSS CPU. APSS CPU frequency is
provided with APSS CPU PLL divider which divides down the VCO
frequency. This divider is nonlinear and specific to IPQ4019
so the standard divider code cannot be used for this.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:26 -08:00
Abhishek Sahu 4577aa01a5 clk: qcom: ipq4019: remove fixed clocks and add pll clocks
The current ipq4019 clock driver registered the PLL clocks and
dividers as fixed clock. These fixed clock needs to be removed
from driver probe function and same need to be registered with
clock framework. These PLL clocks should be programmed only
once and the same are being programmed already by the boot
loader so the set rate operation is not required for these
clocks. Only the rate can be calculated by clock operations
in clock driver file so this patch adds the same.

The PLL takes the reference clock from XO and generates the
intermediate VCO frequency. This VCO frequency will be divided
down by different PLL internal dividers. Some of the PLL
internal dividers are fixed while other are programmable.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:25 -08:00
Sricharan R 96893e101e clk: qcom: Put venus core0/1 gdscs to hw control mode
The venus video ip's internal core blocks are under the
control of the firmware and their powerdomains needs to be
'ON' only when used by the firmware. So putting it into
hw controlled mode lets this to happen, otherwise the firmware
hangs checking for this.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 16:41:19 -08:00
Rajendra Nayak 904bb4f5c7 clk: qcom: gdsc: Add support for gdscs with HW control
Some GDSCs might support a HW control mode, where in the power
domain (gdsc) is brought in and out of low power state (while
unsued) without any SW assistance, saving power.
Such GDSCs can be configured in a HW control mode when powered on
until they are explicitly requested to be powered off by software.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 16:41:15 -08:00
Georgi Djakov c260524aba clk: qcom: clk-rpm: Fix clk_hw references
Fix the clk_hw references to the actual clocks and add a xlate function
to return the hw pointers from the already existing static array.

Reported-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 11:12:48 -08:00
Georgi Djakov 81b7667aac clk: qcom: clk-smd-rpm: Fix clk_hw references
Fix the clk_hw references to the actual clocks and add a xlate function
to return the hw pointers from the already existing static array.

Reported-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 11:12:47 -08:00
Rajendra Nayak 5f5001a978 clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops
The sdcc driver for msm8996/msm8916/msm8974/msm8994 and apq8084
expects a clk_set_rate() on the sdcc rcg clk to set
a floor value of supported clk rate closest to the requested
rate, by looking up the frequency table.
So move all the sdcc rcgs on all these platforms to use the
newly introduced clk_rcg2_floor_ops

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 11:00:06 -08:00
Rajendra Nayak 081ba80206 clk: qcom: Add rcg ops to return floor value closest to the requested rate
The default behaviour with clk_rcg2_ops is for the
clk_round_rate()/clk_set_rate() to return/set a ceil clock
rate closest to the requested rate by looking up the corresponding
frequency table.
However, we do have some instances (mainly sdcc on various platforms)
of clients expecting a clk_set_rate() to set a floor value instead.
Add a new clk_rcg2_floor_ops to handle this for such specific
rcg instances

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23 11:00:05 -08:00
Stephen Boyd 81ab3279c5 Merge branch 'clk-qcom-rpm' into clk-next
* clk-qcom-rpm:
  clk: qcom: Add support for RPM Clocks
  clk: qcom: Add support for SMD-RPM Clocks
  clk: qcom: Always add factor clock for xo clocks
2016-11-10 16:50:16 -08:00
Georgi Djakov 872f91b5ea clk: qcom: Add support for RPM Clocks
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_rpm driver to communicate with RPM.
Such platforms are apq8064 and msm8960.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 16:46:56 -08:00
Georgi Djakov 00f64b5887 clk: qcom: Add support for SMD-RPM Clocks
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_smd_rpm driver to communicate with RPM.
Such platforms are msm8916, apq8084 and msm8974.

The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.

This driver is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove useless braces for single line if]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 16:37:55 -08:00
Georgi Djakov 54823af9cd clk: qcom: Always add factor clock for xo clocks
Currently the RPM/RPM-SMD clock drivers do not register the xo clocks,
so we should always add factor clock. When we later add xo clocks support
into the drivers, we should update this function to skip registration.
By doing so we avoid any DT dependencies.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 16:36:19 -08:00
Stephen Boyd b0e031c94a Merge branch 'clk-qcom-8994' into clk-next
* clk-qcom-8994:
  clk: qcom: Add support for msm8994 global clock controller
  dt-bindings: qcom: clocks: Add msm8994 clock bindings
2016-11-10 15:47:56 -08:00
Bastian Köcher aec89f78cf clk: qcom: Add support for msm8994 global clock controller
The clock definition was ported from the Google 3.10 kernel tree to
work with the latest kernel.

Signed-off-by: Bastian Köcher <mail@kchr.de>
[jeremymc@redhat.com: created new commit of just dt-bindings]
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Tidy up commit text and Kconfig help]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 15:45:42 -08:00
Stephen Boyd cbf2e548ca clk: qcom: ipq806x: Fix board clk rates
The clocks on these boards run at 25 MHz, not 19.2 and 27 like
other platforms. Unfortunately I copy/pasted from other similar
SoCs but forgot this one is different. Fix it.

Fixes: a085f877a8 ("clk: qcom: Move cxo/pxo/xo into dt files")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-09 17:10:32 -08:00
Rajendra Nayak 3bd31cdc4a clk: qcom: Add freq tables for a few rcgs
Add frequency tables for a few RCG clocks in msm8996

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 14:53:16 -07:00
Rajendra Nayak 86c390dcd8 clk: qcom: Add .is_enabled ops for clk-alpha-pll
This would be useful in subsequent patches when the .set_rate operation
would need to identify if the PLL is actually enabled

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Simplify return statement of is_enabled op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02 14:52:58 -07:00
Rajendra Nayak 400d9fda39 clk: qcom: Enable FSM mode for votable alpha PLLs
The votable alpha PLLs need to have the fsm mode enabled as part
of the initialization. The sequence seems to be the same as used
by clk-pll, so move the function which does this into a common
place and reuse it for the clk-alpha-pll

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 18:39:17 -07:00
Rajendra Nayak 31256f4892 clk: qcom: handle alpha PLLs with 16bit alpha val registers
Some alpha PLLs have support for only a 16bit programable Alpha Value
(as against the default 40bits). Add a flag to handle the 16bit alpha
registers

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 18:39:16 -07:00
Rajendra Nayak 9f4e627702 clk: qcom: Add support to initialize alpha plls
Add a function to do initial configuration of the alpha plls

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 18:39:16 -07:00
Rajendra Nayak feb65645c1 clk: qcom: Add support for alpha pll hwfsm ops
Some PLLs can support an HW FSM mode (different from the Votable FSMs,
though its the same bit used to enable Votable FSMs as well as HW FSMs)
which enables the HW to do the bypass/reset/enable-output-ctrl sequence
on its own. So all thats needed from SW is to set the FSM_ENA bit.
PLL_ACTIVE_FLAG is whats used to check if the PLL is active/enabled.

Some of the PLLs which support HW FSM can also need an OFFLINE request
that needs to be toggled across the enable/disable. We use a flag to
identify such cases and handle them.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 18:39:15 -07:00
Abhishek Sahu f747597ea3 clk: qcom: ipq4019: changed i2c freq table
The current I2C freq table uses MND values which is not
applicable for I2C since its RCG does not have MND
counter. This patch updates the freq table for 19.05
MHz clk frequency with FEPLL_200 parent.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 18:29:23 -07:00
Axel Lin 74a484ced2 clk: qcom: lcc-ipq806x: Fixup overriding val in regmap_read call
Drop the assignment of regmap_read return code to val, so the code checks
the value read.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 17:44:09 -07:00
Rajendra Nayak 4154f61997 clk: qcom: mmcc-8996: Add gpu gdscs
Add gpu gdsc data for msm8996

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 17:24:44 -07:00
Rajendra Nayak e7cc455fcd clk: qcom: Handle the clamp_io assert/deassert sequence
Add a flag to mark gdscs which need to support the clamp deassert/assert
before and after the gdsc enable/disable

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01 17:24:42 -07:00
Vivek Gautam dc19b6f5be clk: Add USB3 PHY reset lines
Adding missing reset lines for USB 3.0 PHY.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16 16:19:50 -07:00
Srinivas Kandagatla 62d157587e clk: gcc-msm8996: add missing pcie phy reset lines
This patch adds missing 2 PCIE common reset lines.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25 13:02:33 -07:00
Srinivas Kandagatla ce61966c05 clk: gcc-msm8996: Fix pcie 2 pipe register offset
This patch corrects the register offset for pcie2 pipe clock.
Offset according to datasheet is 0x6e018 instead of 0x6e108.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: b1e010c073 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25 13:02:20 -07:00
Srinivas Kandagatla 6d91f2c014 clk: qcom: select GDSC for msm8996 gcc and mmcc
This patch selects QCOM_GDSC Kconfig for msm8996 GCC and MMCC clock
controllers, as these provide some of the gdscs on the SOC.

Also selecting this config will make it align with other drivers which
do the same.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 52111672f7 ("clk: qcom: gdsc: Add GDSCs in msm8996 GCC")
Fixes: 7e824d5079 ("clk: qcom: gdsc: Add mmcc gdscs for msm8996 family")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25 12:51:17 -07:00
Stephen Boyd 120c155283 clk: qcom: Migrate to clk_hw based registration and OF APIs
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers in this driver, allowing us to
move closer to a clear split of consumer and provider clk APIs.

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-24 17:37:06 -07:00
Rajendra Nayak 63bb4fd6a3 clk: qcom: gdsc: Add the missing BIMC gdsc for msm8996
Add BIMC gdsc data found in MMCC part of msm8996 family of devices.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:55:19 -07:00
Markus Elfring 57c4a2ac8f clk: gcc-ipq4019: Delete unnecessary assignment for the field "owner"
The field "owner" is set by the core.
Thus delete an unneeded initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-17 14:32:08 -07:00