Commit Graph

49 Commits

Author SHA1 Message Date
Bartosz Golaszewski c553c3c478 gpio: mxc: use devm_irq_alloc_descs()
This driver never frees the interrupt descriptors it allocates. Fix
it by using the resource managed version of irq_alloc_descs().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15 11:16:37 +01:00
Linus Torvalds 6a497e9d58 This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
 
 - Do away with the last users of the obsolete Kconfig options
   ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
   always sounded like an item on a wishlist to Santa Claus to
   me). We can now select GPIOLIB and be done with it, for all
   archs. After some struggle it even work on UM. Not that it has
   GPIO, but if it wants to, it can select the library.
 
 - Continued efforts to make drivers properly either tristate or
   bool.
 
 - Introduce a warning for drivers assigning default triggers to
   their irqchip lines when probed from device tree, so we find and
   fix these ambigous drivers. It is agreed that in the OF config
   path, the device tree defines trigger characteristics.
 
 - The same warning, mutatis mutandis, for ACPI-probed GPIO
   irqchips.
 
 - We introduce the ability to mark certain IRQ lines as "unusable"
   as they can be taken by BIOS/firmware, unrouted in silicon and
   generally nasty if you use them, and such things. This is
   put to good use in the STMPE driver and also in the Cherryview
   pin control driver.
 
 - A new "mockup" virtual GPIO device that can be used for testing.
   The plan is to add unit tests under tools/* for exercising this
   device and verify that the kernel code paths are working as they
   should.
 
 - Make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
   implicit all the time, but when people started building UM
   with allyesconfig or allmodconfig it exploded in their face.
 
 - Move some stray bits of device tree and ACPI HW description
   callbacks down into their respective implementation silo. These
   were causing issues when compiling on !HAS_IOMEM as well, so
   now eventually UM compiles the GPIOLIB library if it wants to.
 
 New drivers:
 
 - New driver for the Aspeed GPIO front-end companion to the
   pin controller merged through the pin control tree.
 
 - New driver for the LP873x PMIC GPIO portions.
 
 - New driver for Technologic Systems' I2C FPGA GPIO such as
   TS4900, TS-7970, TS-7990 and TS-4100.
 
 - New driver for the Broadcom BCM63xx series including BCM6338
   and BCM6345.
 
 - New driver for the Intel WhiskeyCove PMIC GPIO.
 
 - New driver for the Allwinner AXP209 PMIC GPIO portions.
 
 - New driver for Diamond Systems 48 line GPIO-MM, another of
   these port-mapped I/O expansion cards.
 
 - Support the STMicroelectronics STMPE1600 variant in the STMPE
   driver.
 
 Driver improvements:
 
 - The STMPE driver now supports rising/falling edge detection
   properly for IRQs.
 
 - The PCA954x will now fetch and enable its VCC regulator properly.
 
 - Major rework of the PCA953x driver with the goal of eventually
   switching it over to use regmap and thus modernize it even more.
 
 - Switch the IOP driver to use the generic MMIO GPIO library.
 
 - Move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
   over to this subsystem from MFD, achieveing some separation of
   concerns.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX9OvDAAoJEEEQszewGV1zsPQP/3VLy1fNIpMF0DDyq5tA/GNv
 sinnaPgMtt+qBrM2sbJcTVwV9xtHrs12CC3+2lAhBCIEm4YfHbXvaUMNE+aKJzk4
 ZM7/rb8WMUxjQqzDKStdETsQGo6fxh0qU81OEQNbX9alir20jik9DvTufcs6xCgx
 sqh8KsNGO4Y6tiuKZ6mTZvIjVhMwiTm0NBSDKhdim0DdsOcuxyh6xVOj/0LB2Ei6
 g75X1w++wjh0ryY3bzaeWkQSlXDC6eEKeez7VaEkSUyrxH86buomy0+aP0fqs7vY
 LRZzn/TC97YLT6hslS/OhB7uXrDIY2POSwO/SvusJcveGP7WPGyGr5mDtA4ATRWI
 ios0DBWl629kHfhAMzg3kPJS8LfjCerapvtbdAgqvhH+Vb5IPFx45vypDkR2WtJ7
 bNAySIRMQSHZvJSCvYzjqh8AbWdE4i4k70tFXRMOpWeKIvRVI1cDvLD6cLn3hATM
 IPTytM6i2xqnzcq7mK7EJ18afcR0mv1jHgGAv4M0RMkyJ2IrURvFyZIvUB2MTyuL
 PEBh1ZvTs+MO50eeFwzltY91eagkzgWB0f6sm3l7I7bL2oxE2f/WVcVL9jWbgwpF
 otjFO27u0/6rIulfLUQzDo3gbOq7UaN0VTW4E9CYbOtFtNzCxjFIKTv0IJhTu4TT
 OSur7oFpzAMOGYlpYP8j
 =ABbi
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...
2016-10-05 11:49:09 -07:00
Vladimir Zapolskiy 4c806c9891 gpio: mxc: add generic gpio request/free callbacks to pinctrl
If a GPIO controller description in board DTB contains information
about mappings between GPIOs and pads under IOMUX control use it to
request and free GPIOs with respect to pinctrl/pinmux subsystems.

One of immediate positive functional changes is inability to
request non-existing GPIOs, i.e. if there is no pad such. Also
pinctrl/pinmux may now properly account pads occupied by requested
GPIOs.

The change has no effect, if "gpio-ranges" property is not found
including the case if a board has no DTB firmware.

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12 14:28:59 +02:00
Vladimir Zapolskiy e188cbf756 gpio: mxc: shift gpio_mxc_init() to subsys_initcall level
In general situation on-SoC GPIO controller drivers should be probed
after pinctrl/pinmux controller driver, because on-SoC GPIOs utilize a
pin/pad as a resource provided and controlled by pinctrl subsystem.

This is stated in multiple places, e.g. from drivers/Makefile:

  GPIO must come after pinctrl as gpios may need to mux pins etc

Looking at Freescale iMX SoC series specifics, imx*_pinctrl_init()
functions are called at arch_initcall and postcore_initcall init
levels, so the change of initcall level for gpio-mxc driver from
postcore_initcall to subsys_initcall level is sufficient. Also note
that the most of GPIO controller drivers settled at subsys_initcall
level.

If pinctrl subsystem manages pads with GPIO functions, the change is
needed to avoid unwanted driver probe deferrals during kernel boot.

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12 14:27:41 +02:00
Paul Gortmaker 2c8d6c869f gpio: mxc: drop unused MODULE_ tags from non-modular code
The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_MXC
drivers/gpio/Kconfig:   def_bool y

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Note the original e-mail had a missing/typo'd @ symbol anyway.

We don't replace module.h with init.h since the file already has that.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Juergen Beisert <kernel@pengutronix.de>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-23 11:22:38 +02:00
Laxman Dewangan ffc566303e gpio: mxc: Use devm_gpiochip_add_data() for gpio registration
Use devm_gpiochip_add_data() for GPIO registration and clean the
error path.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23 20:35:37 +05:30
Linus Walleij 0f4630f372 gpio: generic: factor into gpio_chip struct
The separate struct bgpio_chip has been a pain to handle, both
by being confusingly similar in name to struct gpio_chip and
for being contained inside a struct so that struct gpio_chip
is contained in a struct contained in a struct, making several
steps of dereferencing necessary.

Make things simpler: include the fields directly into
<linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and
get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix
some of the member variables with bgpio_* and add proper
kerneldoc while we're at it.

Modify all users to handle the change and use a struct
gpio_chip directly. And while we're at it: replace all
container_of() dereferencing by gpiochip_get_data() and
registering the gpio_chip with gpiochip_add_data().

Cc: arm@kernel.org
Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05 11:21:00 +01:00
Christoph Hellwig 16c3bd3541 gpio-mxc: stop including <asm-generic/bug>
<asm-generic/bug> contains the default implementation of BUG() and friends,
which architectures may decide to use.  The proper way to get them is
<linux/bug.h>, so use that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15 00:21:12 +02:00
Linus Torvalds fadb97b089 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "This is a rather large update post rc1 due to the final steps of
  cleanups and API changes which had to wait for the preparatory patches
  to hit your tree.

   - Regression fixes for ARM GIC irqchips

   - Regression fixes and lockdep anotations for renesas irq chips

   - The leftovers of the cleanup and preparatory patches which have
     been ignored by maintainers

   - Final conversions of the newly merged users of obsolete APIs

   - Final removal of obsolete APIs

   - Final removal of ARM artifacts which had been introduced during the
     conversion of ARM to the generic interrupt code.

   - Final split of the irq_data into chip specific and common data to
     reflect the needs of hierarchical irq domains.

   - Treewide removal of the first argument of interrupt flow handlers,
     i.e. the irq number, which is not used by the majority of handlers
     and simple to retrieve from the other argument the irq descriptor.

   - A few comment updates and build warning fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  arm64: Remove ununsed set_irq_flags
  ARM: Remove ununsed set_irq_flags
  sh: Kill off set_irq_flags usage
  irqchip: Kill off set_irq_flags usage
  gpu/drm: Kill off set_irq_flags usage
  genirq: Remove irq argument from irq flow handlers
  genirq: Move field 'msi_desc' from irq_data into irq_common_data
  genirq: Move field 'affinity' from irq_data into irq_common_data
  genirq: Move field 'handler_data' from irq_data into irq_common_data
  genirq: Move field 'node' from irq_data into irq_common_data
  irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag
  irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag
  genirq: Provide IRQD_FORWARDED_TO_VCPU status flag
  genirq: Simplify irq_data_to_desc()
  genirq: Remove __irq_set_handler_locked()
  pinctrl/pistachio: Use irq_set_handler_locked
  gpio: vf610: Use irq_set_handler_locked
  powerpc/mpc8xx: Use irq_set_handler_locked()
  powerpc/ipic: Use irq_set_handler_locked()
  powerpc/cpm2: Use irq_set_handler_locked()
  ...
2015-09-18 08:11:42 -07:00
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00
Peng Fan 9e26b0b114 gpio: mxc: need to check return value of irq_alloc_generic_chip
Need to check return value of irq_alloc_generic_chip, because
it may return NULL.
1. Change mxc_gpio_init_gc return type from void to int.
2. Add a new lable out_irqdomain_remove to remove the irq domain
   when mxc_gpio_init_gc fail.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
[Manually rebased]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:12:02 +02:00
Dirk Behme 929550b9f9 gpio: mxc: fix section mismatch warning
Fix the section mismatch warning

WARNING: vmlinux.o(.text+0x2b2788): Section mismatch in reference from the function mxc_gpio_probe() to the function .init.text:mxc_gpio_init_gc()
The function mxc_gpio_probe() references
the function __init mxc_gpio_init_gc().
This is often because mxc_gpio_probe lacks a __init
annotation or the annotation of mxc_gpio_init_gc is wrong.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 15:37:04 +02:00
Ulises Brindis 952cfbd38e gpio/mxc: mask gpio interrupts in suspend
Currently in the FSL platform all GPIO interrupts in a bank are muxed
into two GPIO lines to the GPC interrupt controller. In each GPIO bank
GPIOs 0-15 are OR'ed into one GPC interrupt controller interrupt and 16-31
are OR'ed into another. With the current code, if any of the 0-15 or
16-31 interrupts are marked as wakeup capable, all interrupts belonging
to that sub-bank (either 0-15 or 16-31) will wake up the device. This is
because interrupts are only being masked at the interrupt controller
and not at the GPIO controller.

This patch allows masking of GPIO interrupts at the GPIO controller during
suspend if they have not been labeled wakeup capable. This patch uses
preexisting IRQCHIP_MASK_ON_SUSPEND flag while initializing the GPIO
interrupts to get the desired behavior.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Ulises Brindis <ubrindis56@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 14:46:56 +02:00
Jiang Liu 476f8b4c94 gpio: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Preparatory patch for the removal of the 'irq' argument from irq flow
handlers.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-14 12:12:20 +02:00
Linus Torvalds 10b4b096d0 This is the big bulk of GPIO changes queued for the v4.2
kernel series:
 
 - A big set of cleanups to the aged sysfs interface from
   Johan Hovold. To get these in, v4.1-rc3 was merged into
   the tree as the first patch in that series had to go
   into stable. This makes the locking much more fine-grained
   (get rid of the "big GPIO lock(s)" and store states in the
   GPIO descriptors.
 
 - Rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value()
   to avoid confusions.
 
 - New drivers for:
   - NXP LPC18xx (currently LPC1850)
   - NetLogic XLP
   - Broadcom STB SoC's
   - Axis ETRAXFS
   - Zynq Ultrascale+ (subdriver)
 
 - ACPI:
   - Make it possible to retrieve GpioInt resources from
     a GPIO device using acpi_dev_gpio_irq_get()
   - Merge some dependent I2C changes exploiting this.
   - Support the ARM X-Gene GPIO standby driver.
 
 - Make it possible for the generic GPIO driver to read
   back the value set registers to reflect current
   status.
 
 - Loads of OMAP IRQ handling fixes.
 
 - Incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
   PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.
 
 - Janitorial (contification, checkpatch cleanups)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVh76DAAoJEEEQszewGV1zYFsP/AnyCHs4M67k5Eegxtiwoomc
 OTqkVtOcob9kfqMkbZ1dsjZe2ZYIDiyWeQ1xuV+dD9nx/iAu6inUxb0dXhxKXonr
 +7mQglg32+zWTepLOJosoftoIqOb06lsMfgjL+tJcY5Od7/rewpdEplfEcjmq1O0
 0OdaV2FCXIhHDt52iYHT4tYI1GCky9K4Au9NlPCbKAsGneb3fQahF9o3JpYXl1Oq
 YhIFzUEhM+Zi2IoRsloGdK/eGEHni59IDekhZDf4PnYgA4Dkx2/e1A2Q0h5oT+QI
 j2yfRbI9t1gA5UK7JR/rVJF+5+E8uZ06TZgTo8tU00U4ZvppNgHt8O4KZkJMFBce
 KZzD9rkVVGp0NIDVwmOWjnfwkVVcQzMg/Wf17oM+qdaPO4GHEXNaQaInk1zmwqZq
 tQiTk47zA4rrEaYq3YZjt4xQjl8+ExDlOzFjnfLYAm27gbIl6EFWbX2ON981MC8g
 Nap8MLZINbGTlyDHtuqUlnqN+oXoP8niFuuDixYR+pM1P1bgwIVF+VopRJBFJRJP
 IeR6VdsI9KS99Kg8ICf4ds6WdKAGU3Htj+26udgMhIlOWrkCbvvexIxq9oBkwIB1
 VZofnSZLqnlKvo9Z140atvJWkFti7mqhItVjohmZyvyImLtmQBMq3kSGurXEqWms
 /NGZ0txPd1lMHx5o6ZPK
 =vKYs
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull gpio updates from Linus Walleij:
 "This is the big bulk of GPIO changes queued for the v4.2 kernel
  series:

   - a big set of cleanups to the aged sysfs interface from Johan
     Hovold.  To get these in, v4.1-rc3 was merged into the tree as the
     first patch in that series had to go into stable.  This makes the
     locking much more fine-grained (get rid of the "big GPIO lock(s)"
     and store states in the GPIO descriptors.

   - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to
     avoid confusions.

   - New drivers for:
      * NXP LPC18xx (currently LPC1850)
      * NetLogic XLP
      * Broadcom STB SoC's
      * Axis ETRAXFS
      * Zynq Ultrascale+ (subdriver)

   - ACPI:
      * make it possible to retrieve GpioInt resources from a GPIO
        device using acpi_dev_gpio_irq_get()
      * merge some dependent I2C changes exploiting this.
      * support the ARM X-Gene GPIO standby driver.

   - make it possible for the generic GPIO driver to read back the value
     set registers to reflect current status.

   - loads of OMAP IRQ handling fixes.

   - incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
     PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.

   - janitorial (constification, checkpatch cleanups)"

* tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: Fix checkpatch.pl issues
  gpio: pcf857x: handle only enabled irqs
  gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found
  GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use
  gpio: improve error reporting on own descriptors
  gpio: promote own request failure to pr_err()
  gpio: Added support to Zynq Ultrascale+ MPSoC
  gpio: add ETRAXFS GPIO driver
  fix documentation after renaming gpiod_set_array to gpiod_set_array_value
  gpio: Add GPIO support for Broadcom STB SoCs
  gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
  gpio: tb10x: Drop unneeded free_irq() call
  gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip
  gpio: stp-xway: Use the of_property_read_u32 helper
  gpio: pcf857x: Check for irq_set_irq_wake() failures
  gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
  gpio: Prevent an integer overflow in the pca953x driver
  gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly
  gpio: omap: rework omap_gpio_request to touch only gpio specific registers
  gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers
  ...
2015-06-23 13:34:02 -07:00
Russell King e65eea54e9 gpio: gpio-mxc: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/E1Z4z0C-0002SX-Lj@rmk-PC.arm.linux.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 14:03:08 +02:00
Krzysztof Kozlowski f4f79d4062 gpio: Constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12 09:41:28 +02:00
Vladimir Zapolskiy 442b2494b1 gpio: mxc: read output value from GPIO_DR register
All supported iMX GPIO controllers store configured GPIO output value
in GPIO_DR data register, which is represented by GPIO generic reg_set.
Provide a BGPIOF_READ_OUTPUT_REG_SET flag to bgpio_init() to allow
correct getting of previously set output value.

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-11 11:53:05 +02:00
Wolfram Sang 4a3a950ee9 gpio: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:31 +02:00
abdoulaye berthe 9f5132ae82 gpio: remove all usage of gpio_remove retval in driver/gpio
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:39:26 +02:00
Sachin Kamat 5ea80e4910 gpio: mxc: Do not hard code return value
Silences the following warning:
why not propagate 'port->irq' from platform_get_irq() instead of (-22)?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02 13:55:53 +01:00
Uwe Kleine-König c0e811d9f5 gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler
Similar to commit

	0e44b6e (gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler())

. It doesn't seem to be critical to make the irqs work, but still it is
more correct.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16 15:19:11 +02:00
Fabio Estevam 18f92b19b4 gpio: gpio-mxc: Include "<linux/err.h>"
Commit 8cd73e4e (gpio: gpio-mxc: Use devm functions) causes the following build
error on imx_v4_v7_defconfig:

drivers/gpio/gpio-mxc.c:414:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration]
drivers/gpio/gpio-mxc.c:415:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration]

Note: imx_v6_v7_defconfig does not give this build error, probably due to some
indirect header file inclusion.

Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23 01:26:22 +02:00
Fabio Estevam 8cd73e4e38 gpio: gpio-mxc: Use devm functions
By using devm functions we can get a simpler code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20 19:38:52 +02:00
Catalin Marinas de88cbb7b2 arm: Move chained_irq_(enter|exit) to a generic file
These functions have been introduced by commit 10a8c383 (irq: introduce
entry and exit functions for chained handlers) in asm/mach/irq.h. This
patch moves them to linux/irqchip/chained_irq.h so that generic irqchip
drivers do not rely on architecture specific header files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
2013-03-26 16:11:43 +00:00
Bill Pemberton 3836309d93 gpio: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:39:33 -08:00
Shawn Guo 7e6086d9e5 gpio/mxc: specify gpio base for device tree probe
Currently, unlike the non-DT probe where the gpio base is specified
with pdev->id, the DT probe uses the base dynamically allocated by
gpio core, which uses a completely different numbering scheme.  This
causes two issues to user space applications which access sysfs entry
/sys/class/gpio/gpioN.

* It breaks the compatibility with user space applications between
  non-DT and DT kernels.

* It's not intuitive and sometimes hard for users to map the Linux
  gpio number to the actual hardware pin.

Use alias to identify the gpio port/bank, and then the gpio base
can be specified with port id to solve above issues.  If alias is not
defined in device tree, the base number dynamically allocated by gpio
core will be used.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:55:22 +02:00
Shawn Guo f6b0ca25ee gpio/mxc: remove redundant shadow variables initialization
With commit 3e11f7b (gpio/generic: initialize basic_mmio_gpio shadow
variables properly) in place, the shadow variables initialization is
being done in generic driver bgpio_init call.

Remove the redundant shadow variables initialization from gpio-mxc
driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:43:26 +02:00
Linus Torvalds f948ad0787 GPIO changes for v3.6:
- New driver for AMD-8111 southbridge GPIOs
 - New driver for Wolfson Micro Arizona devices
 - Propagate device tree parse errors
 - Probe deferral finalizations - all expected calls to
   GPIO will now hopefully request deferral where apropriate
 - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung
   MXC, OMAP and PCA953X drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQEHMDAAoJEEEQszewGV1zwPYP/jkxBzvEl+iEO0RFwT4PtmCi
 Y8JOJNT1bw/3MHPcRT12E+gzj01S9GldbuaUObcudmnnynpjeC0S8JNhSKGD9uHa
 TTcCcMbZiKzJyZr/OL8EId7W1FGUO+51uB4hqEKCHMWRY/PBIjKxhvtj+BKEWyvn
 OVhWCxo2O7lv7rzeKiPc8WJMiodLS1urbZEyz7IADZtT3m8vu146rEQRvbNSSXa0
 AJfl494XX1sbv0tzYzvE66+vjvvkgsjHq3O7On5b2svdnZGpAL/6CjEUVrpBXr4K
 NPKuq9TsLfVMH3w3xvQ70PoA7M0L+KvKcdjTvgZpf2KLIU7dwoL91PzAupcjSTr1
 SkcTPtNFxuaRy0cFD+ZAwL2eIOGaNxk6N4tj1da35QjCUkNROHG5K6ByIL1e1ewO
 NuxAyn7QLrYdmXzBc5/DhZiBA0ShqoYg4oEgBDZklOKqjT3mqmjQbDq8i0Qy197W
 lb3Barg+WWm+NW1kmPYnrOJUZXa1ApVHuz8db7OrcUy5kTcUhVTY3DcQzFgG1CZT
 H284c9Zm8WaP814jE8SzLMGeFaCuI63xFMNkpnba11Bt+8Cr1I+LjWSd+ttCFdVm
 W9t/fMEX1bVpVrbTKMvcwm7AwnoeOUEwJCqAICLe5OE/1mEvanyjNXX4wfFP58jv
 OlQ/a9REqoOLAvvbV2qp
 =tujx
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 - New driver for AMD-8111 southbridge GPIOs
 - New driver for Wolfson Micro Arizona devices
 - Propagate device tree parse errors
 - Probe deferral finalizations - all expected calls to GPIO will now
   hopefully request deferral where apropriate
 - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP
   and PCA953X drivers.

Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c

* tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available
  gpiolib: Defer failed gpio requests by default
  MAINTAINERS: add entry OMAP GPIO driver
  gpio/pca953x: increase variables size to support 24 bit of data
  GPIO: PCA953X: Increase size of invert variable to support 24 bit
  gpio/omap: move bank->dbck initialization to omap_gpio_mod_init()
  gpio/mxc: use the edge_sel feature if available
  gpio: propagate of_parse_phandle_with_args errors
  gpio: samsung: add flags specifier to device-tree binding
  gpiolib: Add support for Wolfson Microelectronics Arizona class devices
  gpio: gpio-lpc32xx: Add gpio_to_irq mapping
  gpio: pcf857x: share 8/16 bit access functions
  gpio: LPC32xx: Driver cleanup
  MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry
  gpiolib: wm8994: Convert to devm_kzalloc()
  gpiolib: wm8994: Use irq_domain mappings for gpios
  gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips
  gpio/tca6424: merge I2C transactions, remove cast
  gpio/of: fix a typo of comment message
2012-07-26 13:56:38 -07:00
Linus Torvalds 3645f0cd96 arm-soc: sparse IRQ conversion
The I.MX platform is getting converted to use sparse IRQs. We are doing
 this for all platforms over time, because this is one of the
 requirements for building a multiplatform kernel, and generally a good
 idea.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2dgGCrR//JCVInAQJOJRAA4xWh3CUqpuJ13yk2tOBcGU9+orer93fP
 U3DAG6jJ75blQzfA9wBoWPjqFhJo76ZtLFA9comkGI4vH8nTNNbXr1ZNt2/PjOGS
 PqZIYJk/f5QqOzCd10V5bK4EVFR/mjvQ8sBP8qfaHII0GVPomfa8jnXnFnLFjreX
 hhucTCf4z2HBvIjfOiilPtJbFpdrQ9oquM4W4Go1lrMZMU8B+Z3ClqytoxYW2Bw3
 uQ0EzFlAwaXZ1CMcDn4eQJxNt8dO4SbGI7AHd3HmW3tFaaJC9dpey/7pIoW3gyz8
 2e3wrdHXCAYq3sUlwzIrROCcBfW502E+KUmDi8ePT7zgZmxAmrqRCTNEqwaaGYrS
 Q/mk+Kpnjvtl6w21ss1LxNHP18TNL/f8isYW9vUQG8yogWlVin6NhPvNQXDDBWoD
 lfAyeL5JSoVxVGxft8EhLI/inPKBnWe2heE+zrRGQzUhTuUSyspmwK6o3b7JYNTX
 16fY6OhW90CaZm6r1yKZsiE96Dd63oL4OVFELsgPQdsBNdWeKmOjs6fq46Bp0Hdf
 SAQ543yabPkDr4ZanaNqo0s3Vu2xVnvBS4FR0gbx6+LGuagkmBpSkYnlhgNJBbdK
 6D5GCRoX0ayzJvg29kKzek2h8NhGtDco4dr7K5Hl9NebeZ++CjZ7xTbFQN6olt+D
 8CcIdD2J0PY=
 =Y2Sm
 -----END PGP SIGNATURE-----

Merge tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc sparse IRQ conversion from Arnd Bergmann:
 "The I.MX platform is getting converted to use sparse IRQs.  We are
  doing this for all platforms over time, because this is one of the
  requirements for building a multiplatform kernel, and generally a good
  idea."

* tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: select USE_OF
  ARM: imx: Fix build error due to missing irqs.h include
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
2012-07-23 17:36:02 -07:00
Benoît Thébaudeau aeb27748e3 gpio/mxc: use the edge_sel feature if available
Some mxc processors have an edge_sel feature, which allows the IRQ to be
triggered by any edge.

This patch makes use of this feature if available, which skips mxc_flip_edge().

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Sascha Hauer <kernel@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:16 +02:00
Uwe Kleine-König 33a4e985ba gpio/mxc: make irqs work for fsl,imx21-gpio devices
The chained handler was set for the platform device with id == 0.
When the gpio devices are instantiated by a device tree, all have id ==
-1 and so the handler was unset resulting in unusable gpio irqs on
i.MX21 and i.MX27 (when using oftree).

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 15:40:35 +02:00
Shawn Guo 1ab7ef158d gpio/mxc: move irq_domain_add_legacy call into gpio driver
Move irq_domain_add_legacy call from imx*-dt.c into gpio driver and
have the gpio driver adopt irqdomain support for both DT and non-DT
boot.

With all imx platform code converted from static gpio irq number
computation to use run-time gpio_to_irq call, we can now use
irq_alloc_descs and irqdomain support to dynamically get irq_base
and have the mapping between gpio and irq number available without
using virtual_irq_start and MXC_GPIO_IRQ_START.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-07-01 21:57:22 +08:00
Shawn Guo 3e11f7b840 gpio/generic: initialize basic_mmio_gpio shadow variables properly
It fixes the issue in gpio-generic that commit fb14921 (gpio/mxc: add
missing initialization of basic_mmio_gpio shadow variables) manged to
fix in gpio-mxc driver, so that other platform specific drivers do not
suffer from the same problem over and over again.

Changes since v1:
* Turn the last parameter of bgpio_init() "bool big_endian" into
  "unsigned long flags" and give those really quirky hardwares a
  chance to tell that reg_set and reg_dir are unreadable.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[grant.likely: Fix big-endian usage to explicitly set BBGPIOF_BIG_ENDIAN]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19 12:17:35 -06:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds 952414505f Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits)
  ARM: mach-mxs: fix machines' initializers order
  mmc: mxcmmc: explicitly includes mach/hardware.h
  arm/imx: explicitly includes mach/hardware.h in pm-imx27.c
  arm/imx: remove mx27_setup_weimcs() from mx27.h
  arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c
  arm/imx: remove mx31_setup_weimcs() from mx31.h
  ARM: tegra: devices.c should include devices.h
  ARM: tegra: cpu-tegra: unexport two functions
  ARM: tegra: cpu-tegra: sparse type fix
  ARM: tegra: dma: staticify some tables and functions
  ARM: tegra: tegra2_clocks: don't export some tables
  ARM: tegra: tegra_powergate_is_powered should be static
  ARM: tegra: tegra_rtc_read_ms should be static
  ARM: tegra: tegra_init_cache should be static
  ARM: tegra: pcie: 0 -> NULL changes
  ARM: tegra: pcie: include board.h
  ARM: tegra: pcie: don't cast __iomem pointers
  ARM: tegra: tegra2_clocks: 0 -> NULL changes
  ARM: tegra: tegra2_clocks: don't cast __iomem pointers
  ARM: tegra: timer: don't cast __iomem pointers
  ...

Fix up trivial conflicts in
  arch/arm/mach-omap2/Makefile,
  arch/arm/mach-u300/{Makefile.boot,core.c}
  arch/arm/plat-{mxc,omap}/devices.c
2011-11-01 20:11:00 -07:00
Paul Gortmaker bb207ef1e8 drivers/gpio: Fix drivers who are implicit users of module.h
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in gpio
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:47 -04:00
Shawn Guo 0e44b6eccf gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()
The mx3_gpio_irq_handler() is also called on imx6q which has GIC as
the primary interrupt controller.  As GIC implements the fasteoi flow
control, we need to add chained_irq_enter/exit() to
mx3_gpio_irq_handler() for signaling EOI, otherwise system will hang
whenever there is a gpio irq triggered.

v2: use chained_irq_{enter,exit}()

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-21 10:26:42 -06:00
Shawn Guo a439561229 gpio/mxc: move irq_to_gpio() into gpio-mxc driver
As irq_to_gpio() is only being used by gpio-mxc driver, it should be
moved from mach/gpio.h into gpio-mxc.c.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-17 08:31:04 +02:00
Shawn Guo 09ad8039da gpio/mxc: add .to_irq for gpio chip
It adds .to_irq support for gpio chip, so that __gpio_to_irq in
gpiolib becomes usable.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-16 09:00:37 +02:00
Shawn Guo 591567a5ea gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
The following commit renames irq_gc_ack() to irq_gc_ack_set_bit(),
and makes gpio-mxc and gpio-mxs fail to build.

  659fb32d1b
  genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)

The patch fixed a couple of typo of comma to semicolon.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 13:10:02 -06:00
Shawn Guo 8937cb602b gpio/mxc: add device tree probe support
The patch adds device tree probe support for gpio-mxc driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 12:38:18 -06:00
Shawn Guo e7fc6ae744 gpio/mxc: get rid of the uses of cpu_is_mx()
The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
platform_device_id to distinguish the different gpio types, IMX1_GPIO
on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other
i.mx SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 12:38:12 -06:00
Lothar Waßmann fb14921862 gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
The bgpio_init() function does not initialise the shadow register for
the GPIO direction register. Thus, when configuring the first GPIO with
gpio_set_direction() all other GPIOs of the same bank will be
configured as inputs. Since the bgpio layer cannot know whether the
register is readable, the initialisation should be done by the caller
of bgpio_init().

Also, the 'data' shadow variable that is used inside basic_mmio_gpio
to cache the current value of the GPIO_DR register is initialised from
the GPIO_PSR register within bgpio_init(). Thus when setting the
output value of a certain GPIO, the other GPIO outputs of the same
bank will be set or cleared depending on the pin state of the GPIO
inputs during bgpio_init().

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-07 12:42:50 -06:00
Shawn Guo 5523f86bea gpio/mxc: fix a bug with gpio_get_value calling
When calling gpio_get_value, the gpio number other than bit offset
should be passed as the argument.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-11 21:01:41 -06:00
Shawn Guo e4ea933363 gpio/mxc: convert gpio-mxc to use generic irq chip
The patch converts gpio-mxc driver to use generic irq chip.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-07 08:49:20 -06:00
Shawn Guo 2ce420da39 gpio/mxc: convert gpio-mxc to use basic_mmio_gpio library
The gpio-mxc controller complies with basic_mmio_gpio library.  The
patch convert the driver to use the library.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06 10:01:19 -06:00
Shawn Guo b78d8e59a6 gpio/mxc: Change gpio-mxc into an upstanding gpio driver
The patch makes necessary changes on gpio-mxc as below to turn it
into an upstanding gpio driver.

 * Add a list to save all mx2 ports references, so that
   mx2_gpio_irq_handler can walk through all interrupt status
   registers

 * Use readl/writel to replace mach-specific accessors
   __raw_readl/__raw_writel

 * Change mxc_gpio_init into mxc_gpio_probe function

 * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
   be public at all, and also make some other cleanup on
   plat-mxc/include/mach/gpio.h at the same time

And the patch then migrates mach-imx and mach-mx5 to the updated
driver by adding corresponding platform devices.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06 10:01:19 -06:00
Shawn Guo d37a65bb46 gpio/mxc: Move Freescale MXC gpio driver to drivers/gpio
GPIO drivers are getting moved to drivers/gpio for cleanup and
consolidation.  This patch moves the plat-mxc driver.  Follow up
patches will clean it up and make it a fine upstanding gpio driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06 10:01:19 -06:00