Commit Graph

1083 Commits

Author SHA1 Message Date
Roger Quadros 69226896ad mdio_bus: Issue GPIO RESET to PHYs.
Some boards [1] leave the PHYs at an invalid state
during system power-up or reset thus causing unreliability
issues with the PHY which manifests as PHY not being detected
or link not functional. To fix this, these PHYs need to be RESET
via a GPIO connected to the PHY's RESET pin.

Some boards have a single GPIO controlling the PHY RESET pin of all
PHYs on the bus whereas some others have separate GPIOs controlling
individual PHY RESETs.

In both cases, the RESET de-assertion cannot be done in the PHY driver
as the PHY will not probe till its reset is de-asserted.
So do the RESET de-assertion in the MDIO bus driver.

[1] - am572x-idk, am571x-idk, a437x-idk

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24 12:40:24 -04:00
Laurent Pinchart 7b07cbefb6 iommu: of: Handle IOMMU lookup failure with deferred probing or error
Failures to look up an IOMMU when parsing the DT iommus property need to
be handled separately from the .of_xlate() failures to support deferred
probing.

The lack of a registered IOMMU can be caused by the lack of a driver for
the IOMMU, the IOMMU device probe not having been performed yet, having
been deferred, or having failed.

The first case occurs when the device tree describes the bus master and
IOMMU topology correctly but no device driver exists for the IOMMU yet
or the device driver has not been compiled in. Return NULL, the caller
will configure the device without an IOMMU.

The second and third cases are handled by deferring the probe of the bus
master device which will eventually get reprobed after the IOMMU.

The last case is currently handled by deferring the probe of the bus
master device as well. A mechanism to either configure the bus master
device without an IOMMU or to fail the bus master device probe depending
on whether the IOMMU is optional or mandatory would be a good
enhancement.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pichart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20 16:31:07 +02:00
Sricharan R 09515ef5dd of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices
Configuring DMA ops at probe time will allow deferring device probe when
the IOMMU isn't available yet. The dma_configure for the device is
now called from the generic device_attach callback just before the
bus/driver probe is called. This way, configuring the DMA ops for the
device would be called at the same place for all bus_types, hence the
deferred probing mechanism should work for all buses as well.

pci_bus_add_devices    (platform/amba)(_device_create/driver_register)
       |                         |
pci_bus_add_device     (device_add/driver_register)
       |                         |
device_attach           device_initial_probe
       |                         |
__device_attach_driver    __device_attach_driver
       |
driver_probe_device
       |
really_probe
       |
dma_configure

Similarly on the device/driver_unregister path __device_release_driver is
called which inturn calls dma_deconfigure.

This patch changes the dma ops configuration to probe time for
both OF and ACPI based platform/amba/pci bus devices.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci part)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20 16:31:06 +02:00
Sricharan R efc8551a27 of: device: Fix overflow of coherent_dma_mask
Size of the dma-range is calculated as coherent_dma_mask + 1
and passed to arch_setup_dma_ops further. It overflows when
the coherent_dma_mask is set for full 64 bits 0xFFFFFFFFFFFFFFFF,
resulting in size getting passed as 0 wrongly. Fix this by
passsing in max(mask, mask + 1). Note that in this case
when the mask is set to full 64bits, we will be passing the mask
itself to arch_setup_dma_ops instead of the size. The real fix
for this should be to make arch_setup_dma_ops receive the
mask and handle it, to be done in the future.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20 16:31:06 +02:00
Laurent Pinchart 3f1866779c of: dma: Make of_dma_deconfigure() public
As part of moving DMA initializing to probe time the
of_dma_deconfigure() function will need to be called from different
source files. Make it public and move it to drivers/of/device.c where
the of_dma_configure() function is.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20 16:31:06 +02:00
Tyrel Datwyler b8475cbee5 of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()
The call to of_find_node_by_path("/cpus") returns the cpus device_node
with its reference count incremented. There is no matching of_node_put()
call in of_numa_parse_cpu_nodes() which results in a leaked reference
to the "/cpus" node.

This patch adds an of_node_put() to release the reference.

fixes: 298535c00a ("of, numa: Add NUMA of binding implementation.")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Rob Herring <robh@kernel.org>
2017-04-18 11:04:12 -05:00
Alistair Popple 2475a2b6c8 drivers/of/base.c: Add of_property_read_u64_index
There is of_property_read_u32_index but no u64 variant. This patch
adds one similar to the u32 version for u64.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 23:35:59 +10:00
Rob Herring 0634c29589 of: Add function for generating a DT modalias with a newline
The modalias sysfs attr is lacking a newline for DT aliases on platform
devices. The macio and ibmebus correctly add the newline, but open code it.
Introduce a new function, of_device_modalias(), that fills the buffer with
the modalias including the newline and update users of the old
of_device_get_modalias function.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22 14:56:13 -05:00
Rob Herring bcf54d5385 of: fix of_device_get_modalias returned length when truncating buffers
If the length of the modalias is greater than the buffer size, then the
modalias is truncated. However the untruncated length is returned which
will cause an error. Fix this to return the truncated length. If an error
in the case was desired, then then we should just return -ENOMEM.

The reality is no device will ever have 4KB of compatible strings to hit
this case.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
2017-03-22 09:01:11 -05:00
Thomas Petazzoni a26356ab93 of/pci: Remove unused MSI controller helpers
All users of the small MSI controller API have been migrated to use the
generic MSI infrastructure instead. We no longer need a global chained list
of msi_controller. Instead, MSI controllers are now represented as IRQ
domains attached to OF nodes, and the resolution between a device
requesting an MSI and the corresponding MSI controller is done by the
generic interrupt resolution logic.

Therefore, this API is now completely useless, and can be removed from the
kernel.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-03-14 15:10:11 -05:00
Dave Airlie b558dfd56a Merge tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc into drm-next
First slice of drm-misc-next for 4.12:

Core/subsystem-wide:
- link status core patch from Manasi, for signalling link train fail
  to userspace. I also had the i915 patch in here, but that had a
  small buglet in our CI, so reverted.
- more debugfs_remove removal from Noralf, almost there now (Noralf
  said he'll try to follow up with the stragglers).
- drm todo moved into kerneldoc, for better visibility (see
  Documentation/gpu/todo.rst), lots of starter tasks in there.
- devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob
  Herring)
- extended framebuffer fbdev support (for fbdev flipping), and vblank
  wait ioctl fbdev support (Maxime Ripard)
- misc small things all over, as usual
- add vblank callbacks to drm_crtc_funcs, plus make lots of good use
  of this to simplify drivers (Shawn Guo)
- new atomic iterator macros to unconfuse old vs. new state

Small drivers:
- vc4 improvements from Eric
- vc4 kerneldocs (Eric)!
- tons of improvements for dw-mipi-dsi in rockchip from John Keeping
  and Chris Zhong.
- MAINTAINERS entries for drivers managed in drm-misc. It's not yet
  official, still an experiment, but definitely not complete fail and
  better to avoid confusion. We kinda screwed that up with drm-misc a
  bit when we started committers last year.
- qxl atomic conversion (Gabriel Krisman)
- bunch of virtual driver polish (qxl, virgl, ...)
- misc tiny patches all over

This is the first time we've done the same merge-window blackout for
drm-misc as we've done for drm-intel for ages, hence why we have a
_lot_ of stuff queued already. But it's still only half of drm-intel
(room to grow!), and the drivers in drm-misc experiment seems to work
at least insofar as that you also get lots of driver updates here
alredy.

* tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: (141 commits)
  drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.
  drm/vc4: Fulfill user BO creation requests from the kernel BO cache.
  Revert "drm/i915: Implement Link Rate fallback on Link training failure"
  drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC
  drm: Update drm_fbdev_cma_init documentation
  drm/rockchip/dsi: add dw-mipi power domain support
  drm/rockchip/dsi: fix insufficient bandwidth of some panel
  dt-bindings: add power domain node for dw-mipi-rockchip
  drm/rockchip/dsi: remove mode_valid function
  drm/rockchip/dsi: dw-mipi: correct the coding style
  drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi
  dt-bindings: add rk3399 support for dw-mipi-rockchip
  drm/rockchip: dw-mipi-dsi: add reset control
  drm/rockchip: dw-mipi-dsi: support non-burst modes
  drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded
  drm/rockchip: vop: test for P{H,V}SYNC
  drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC
  drm/rockchip: dw-mipi-dsi: use specific poll helper
  drm/rockchip: dw-mipi-dsi: improve PLL configuration
  drm/rockchip: dw-mipi-dsi: properly configure PHY timing
  ...
2017-03-07 13:59:53 +10:00
Benjamin Gaignard 38b0b219fb of: add devm_ functions for populate and depopulate
Lots of calls to of_platform_populate() are not unbalanced by a call
to of_platform_depopulate(). This create issues while drivers are
bind/unbind.

In way to solve those issues is to add devm_of_platform_populate()
which will call of_platform_depopulate() when the device is unbound
from the bus.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1487952874-23635-2-git-send-email-benjamin.gaignard@linaro.org
2017-02-27 17:20:13 +01:00
Linus Torvalds be5165a51d DeviceTree updates for 4.11:
- Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
   support in dtc.
 
 - Set dma_ops for reserved memory users.
 
 - Make references to IOMMU consistent in DT bindings.
 
 - Cleanup references to pm_power_off in bindings.
 
 - Move some display bindings that snuck into the old bindings/video/
   path.
 
 - Fix some wrong documentation paths caused from binding restructuring.
 
 - Vendor prefixes for Faraday and Fujitsu.
 
 - Fix an of_node ref counting leak in of_find_node_opts_by_path
 
 - Introduce new graph helper of_graph_get_remote_node() which will be
   used by DRM drivers in 4.12.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYrcjTEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOPjg/8
 CZgxb3humk7Kkt+I3IsZCxsXhgdk2+CPfCSHlK1bc5Jqg0TzepQvFt4ZkuRHkZy/
 pQLUpRnUEUl64aaE8WxZY8ELYZggWazcTnWgCOzvoYpqSD4dAkAsqeti1Qh9PGKz
 fNLnPWREftojFZ7wVQ8btxC1dINc9eC9eEHsIsS8S8UIgLgv/aN6PeG1Ll/UUa9d
 u9orY3lxrz8JvdZslGtd1XLZqehIG0AAXqYRasyKl6Sc1NgjdwJTrqoeHEnCYaBM
 0+JUOf8kjRa1QNYN4SpuQ1gpovS8tPUGuODrWF2FvaQIxYHTzF8MpLqTvjBzdsj6
 b1owHzMXOLlPqqmmQ+jkHY5phisM4heJCIanNerzfM9+lHvb6kB3EuoTkAGvzsr/
 HCJi/Wk8tVrw6MYdnav0NT6aLIgZmrVspeJKlS1IdIkpsxZ64DsgX/YS/qGn/fcx
 qMrDXh8gMFwJBENRCKmKYFu1kzJkBoVEXtGlIbRQDZwOIuHPJl/ed6naMSfyUmcL
 wEe1I3buyB38FVzUTM2y0K1LfFJSJqOFSWTy5WCcTyP4cbKUyEja8vzN1Cx8BDwf
 wYtGWQQcg1Pyo074De6ojXWPiiW8f64GLLjqPALjA+J6JtZY5PwAnGXV+1ZYgX+V
 hV+kXbS4UIjN1koxroJ7ahfouWdOignmpwdvomQPLG8=
 =D/BO
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...
2017-02-22 19:23:14 -08:00
Linus Torvalds 8ff546b801 USB/PHY patches for 4.11-rc1
Here is the big USB and PHY driver updates for 4.11-rc1.
 
 Nothing major, just the normal amount of churn in the usb gadget and dwc
 and xhci controllers, new device ids, new phy drivers, a new usb-serial
 driver, and a few other minor changes in different USB drivers.
 
 All have been in linux-next for a long time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2lrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykh7ACffotTJvB/gwpuSIWh6qhA8KQ9mH8AnjlxMafv
 b5b3vfOXJ8/N0Go25VwI
 =7fqN
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and PHY driver updates for 4.11-rc1.

  Nothing major, just the normal amount of churn in the usb gadget and
  dwc and xhci controllers, new device ids, new phy drivers, a new
  usb-serial driver, and a few other minor changes in different USB
  drivers.

  All have been in linux-next for a long time with no reported issues"

* tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: cdc-wdm: remove logically dead code
  USB: serial: keyspan: drop header file
  USB: serial: io_edgeport: drop io-tables header file
  usb: musb: add code comment for clarification
  usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver
  usb: misc: usbtest: remove redundant check on retval < 0
  USB: serial: upd78f0730: sort device ids
  USB: serial: upd78f0730: add ID for EVAL-ADXL362Z
  ohci-hub: fix typo in dbg_port macro
  usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  usb: musb: tusb6010: Clean up tusb_omap_dma structure
  usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  usb: musb: cppi_dma: Clean up cppi structure
  usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  usb: musb: dma: Add a DMA completion platform callback
  drivers: usb: usbip: Add missing break statement to switch
  usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()
  USB: serial: mos7840: fix another NULL-deref at open
  USB: serial: console: clean up sanity checks
  USB: serial: console: fix uninitialised spinlock
  ...
2017-02-22 11:15:59 -08:00
Linus Torvalds ca78d3173c arm64 updates for 4.11:
- Errata workarounds for Qualcomm's Falkor CPU
 - Qualcomm L2 Cache PMU driver
 - Qualcomm SMCCC firmware quirk
 - Support for DEBUG_VIRTUAL
 - CPU feature detection for userspace via MRS emulation
 - Preliminary work for the Statistical Profiling Extension
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJYpIxqAAoJELescNyEwWM0xdwH/AsTYAXPZDMdRnrQUyV0Fd2H
 /9pMzww6dHXEmCMKkImf++otUD6S+gTCJTsj7kEAXT5sZzLk27std5lsW7R9oPjc
 bGQMalZy+ovLR1gJ6v072seM3In4xph/qAYOpD8Q0AfYCLHjfMMArQfoLa8Esgru
 eSsrAgzVAkrK7XHi3sYycUjr9Hac9tvOOuQ3SaZkDz4MfFIbI4b43+c1SCF7wgT9
 tQUHLhhxzGmgxjViI2lLYZuBWsIWsE+algvOe1qocvA9JEIXF+W8NeOuCjdL8WwX
 3aoqYClC+qD/9+/skShFv5gM5fo0/IweLTUNIHADXpB6OkCYDyg+sxNM+xnEWQU=
 =YrPg
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 - Errata workarounds for Qualcomm's Falkor CPU
 - Qualcomm L2 Cache PMU driver
 - Qualcomm SMCCC firmware quirk
 - Support for DEBUG_VIRTUAL
 - CPU feature detection for userspace via MRS emulation
 - Preliminary work for the Statistical Profiling Extension
 - Misc cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits)
  arm64/kprobes: consistently handle MRS/MSR with XZR
  arm64: cpufeature: correctly handle MRS to XZR
  arm64: traps: correctly handle MRS/MSR with XZR
  arm64: ptrace: add XZR-safe regs accessors
  arm64: include asm/assembler.h in entry-ftrace.S
  arm64: fix warning about swapper_pg_dir overflow
  arm64: Work around Falkor erratum 1003
  arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2
  arm64: arch_timer: document Hisilicon erratum 161010101
  arm64: use is_vmalloc_addr
  arm64: use linux/sizes.h for constants
  arm64: uaccess: consistently check object sizes
  perf: add qcom l2 cache perf events driver
  arm64: remove wrong CONFIG_PROC_SYSCTL ifdef
  ARM: smccc: Update HVC comment to describe new quirk parameter
  arm64: do not trace atomic operations
  ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device()
  ACPI/IORT: Fix iort_node_get_id() mapping entries indexing
  arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA
  perf: xgene: Include module.h
  ...
2017-02-22 10:46:44 -08:00
Linus Torvalds 3051bf36c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...
2017-02-22 10:15:09 -08:00
David Daney 7e1392fb94 of_mdio: Add "broadcom,bcm5241" to the whitelist.
Some Cavium dev boards have firmware which doesn't supply a proper
ethernet-phy-ieee802.3-c22" compatible property.  Restore these boards
to working order by whitelisting this compatible value.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19 18:19:37 -05:00
Rob Herring b85ad49409 of: introduce of_graph_get_remote_node
The OF graph API leaves too much of the graph walking to clients when
in many cases the driver doesn't care about accessing the port or
endpoint nodes. The drivers typically just want the device connected via
a particular graph connection. of_graph_get_remote_node provides this
functionality.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-15 08:53:32 -06:00
Frank Rowand bd0096d746 of: Add missing space at end of pr_fmt().
Make pr_fmt() in fdt.c consistent with all other files in drivers/of/

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-09 09:31:30 -06:00
Frank Rowand e553f539f2 of: make of_device_make_bus_id() static
of_device_make_bus_id() was changed to non-static by commit c660122538
("of/device: Make of_device_make_bus_id() usable by other code") more than
6 years ago, but there are no users of it outside of platform.c.  Make the
function static again.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-09 09:29:37 -06:00
Qi Hou 0549bde0fc of: fix of_node leak caused in of_find_node_opts_by_path
During stepping down the tree, parent node is gotten first and its refcount is
increased with of_node_get() in __of_get_next_child(). Since it just being used
as tmp node, its refcount must be decreased with of_node_put() after traversing
its child nodes.

Or, its refcount will never be descreased to ZERO, then it will never be freed,
as well as other related memory blocks.

To fix this, decrease refcount of parent with of_node_put() after
__of_find_node_by_path().

Signed-off-by: Qi Hou <qi.hou@windriver.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-09 09:11:30 -06:00
Alexander Sverdlin ca7b89647b of/unittest: Swap arguments of of_unittest_apply_overlay()
Function signature

  of_unittest_apply_overlay(int unittest_nr, int overlay_nr, ...

and call sites, like in of_unittest_apply_overlay_check():

  ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, ...

do not match. Fix this in one place (function signature).
The only affected test case is 15, which supplies non-existing
overlay number 16, but two bugs matched here. Fix the test case.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-23 14:58:03 -06:00
Stephen Boyd 7a3b7cd332 of: device: Export of_device_{get_modalias, uvent_modalias} to modules
The ULPI bus can be built as a module, and it will soon be
calling these functions when it supports probing devices from DT.
Export them so they can be used by the ULPI module.

Acked-by: Rob Herring <robh@kernel.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20 11:23:56 +08:00
Stephen Boyd 9c829c097f of: device: Support loading a module with OF based modalias
In the case of ULPI devices, we want to be able to load the
driver before registering the device so that we don't get stuck
in a loop waiting for the phy module to appear and failing usb
controller probe. Currently we request the ulpi module via the
ulpi ids, but in the DT case we might need to request it with the
OF based modalias instead. Add a common function that allows
anyone to request a module with the OF based modalias.

Acked-by: Rob Herring <robh@kernel.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20 11:23:51 +08:00
Sudeep Holla 5fa23530d4 of: base: add support to find the level of the last cache
It is useful to have helper function just to get the number of cache
levels for a given logical cpu. We can obtain the same by just checking
the level at which the last cache is present. This patch adds support
to find the level of the last cache for a given cpu.

It will be used on ARM64 platform where the device tree provides the
information for the additional non-architected/transparent/external
last level caches that are not integrated with the processors.

Cc: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Rob Herring <robh+dt@kernel.org>
Tested-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[will: use u32 instead of int for cache_level]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-17 12:09:33 +00:00
XuYing 261c73f3f6 of: remove redundant memset in overlay
memset in of_build_overlay_info is redundant, the ovinfo has been
zeroed in of_fill_overlay_info when error.

Signed-off-by: YiPing Xu <xuyiping@hisilicon.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-09 14:21:23 -06:00
Guilherme G. Piccoli f1aa548406 of/irq: improve error report on irq discovery process failure
On PowerPC machines some PCI slots might not have level triggered
interrupts capability (also know as level signaled interrupts),
leading of_irq_parse_pci() to complain by presenting error messages
on the kernel log - in this case, the properties "interrupt-map" and
"interrupt-map-mask" are not present on device's node in the device
tree.

This patch introduces a different message for this specific case,
and also reduces its level from error to warning. Besides, we warn
(once) that possibly some PCI slots on the system have no level
triggered interrupts available.
We changed some error return codes too on function of_irq_parse_raw()
in order other failure's cases can be presented in a more precise way.

Before this patch, when an adapter was plugged in a slot without level
interrupts capabilitiy on PowerPC, we saw a generic error message
like this:

    [54.239] pci 002d:70:00.0: of_irq_parse_pci() failed with rc=-22

Now, with this applied, we see the following specific message:

    [16.154] pci 0014:60:00.1: of_irq_parse_pci: no interrupt-map found,
    INTx interrupts not available

Finally, we standardize the error path in of_irq_parse_raw() by always
taking the fail path instead of returning directly from the loop.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-09 09:52:17 -06:00
Geliang Tang 30965eeab5 of: drop duplicate headers
Drop duplicate headers string.h and of_platform.h.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-04 14:01:28 -06:00
Smitha T Murthy a3b398e6f2 of: reserved_mem: set dma_ops for devices using reserved mem
For some IPs, there may be virtual child devices created and for them its
necessary to set the dma_ops if it's using reserved memory else it will call
the dummy dma_ops during buffer operations for the child devices which will
lead to memory mapping failure.

Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-04 14:00:45 -06:00
Paul Burton de96ec2a77 OF: Prevent unaligned access in of_alias_scan()
When allocating a struct alias_prop, of_alias_scan() only requested that
it be aligned on a 4 byte boundary. The struct contains pointers which
leads to us attempting 64 bit writes on 64 bit systems, and if the CPU
doesn't support unaligned memory accesses then this causes problems -
for example on some MIPS64r2 CPUs including the "mips64r2-generic" QEMU
emulated CPU it will trigger an address error exception.

Fix this by requesting alignment for the struct alias_prop allocation
matching that which the compiler expects, using the __alignof__ keyword.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14306/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03 16:34:48 +01:00
Tobias Wolf 3ec754410c of: Add check to of_scan_flat_dt() before accessing initial_boot_params
An empty __dtb_start to __dtb_end section might result in
initial_boot_params being null for arch/mips/ralink. This showed that the
boot process hangs indefinitely in of_scan_flat_dt().

Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14605/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03 16:34:43 +01:00
Linus Torvalds 0ab7b12c49 pci-v4.10-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYUt1vAAoJEFmIoMA60/r8abgP/3R+5Lsk5/kfAHk5/2Mtqbvg
 mZ0eDUpY9GbUeMjSq84Nr2H8u7d+1AJCCu8KtDJYZCmjZpnSp2SuE2PS5JoGC7zC
 fintD24jlIF4/J5+HeVXXmbfr3xATxvpTuiSLEi8sLBRJ3KRIswhMSwoPwOyeTQw
 v/EclWKPGYcI5Zp0oigY9/Jd3q3lQ17KXppi/0dDoLh7PNOFvEHItXWzmf++u/NP
 iYT9R1xmzEsy0/HRd6hiwPT2xA8YsAXxgobhHooUgh1FWmZ02Tg1WjgDemOW4lVh
 kNIUcsLczh7wZCceogrrJ+pwb9+NyyIyKuHPv6OG3ieyz1IZdznaj1fAE5HJYiPo
 eVS7cP1S6DyV3Y5qFj5F2dSRS7T4GXdXG5mNhmeCpUHs0vfzSCG36jLmhTy8UIxs
 1rCf5oFa+uU9q0okfH8VtcGOXqWjGgyxTSGGfF71HUMLnPbsci2fxC2cO6svzIX7
 wDY0uxOzpyMIYMuQR6iz7VqvAwEaZ+7pfMIrWWdDcQ9/5tCNJ49cLuKaThPL4bVu
 juiGBQtnTLg8tjrhjDL9tQiJpuVIweVXyyQ1fvZoVXkMLlhVCF2ttirvwFUit2PB
 84OlevQZ+9QdE/qalrWbv4qzhesuiwu0avkzjGoqg6tWTF0epu2AHI2vqy6UBYEG
 tcfJPEcz1019PKZNSvWy
 =ut0k
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes:

   - add support for PCI on ARM64 boxes with ACPI. We already had this
     for theoretical spec-compliant hardware; now we're adding quirks
     for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene)

   - add runtime PM support for hotplug ports

   - enable runtime suspend for Intel UHCI that uses platform-specific
     wakeup signaling

   - add yet another host bridge registration interface. We hope this is
     extensible enough to subsume the others

   - expose device revision in sysfs for DRM

   - to avoid device conflicts, make sure any VF BAR updates are done
     before enabling the VF

   - avoid unnecessary link retrains for ASPM

   - allow INTx masking on Mellanox devices that support it

   - allow access to non-standard VPD for Chelsio devices

   - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA,
     etc

   - update Rockchip support for max-link-speed

   - add NVIDIA Tegra210 support

   - add Layerscape LS1046a support

   - update R-Car compatibility strings

   - add Qualcomm MSM8996 support

   - remove some uninformative bootup messages"

* tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits)
  PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)
  PCI: Expand "VPD access disabled" quirk message
  PCI: pciehp: Remove loading message
  PCI: hotplug: Remove hotplug core message
  PCI: Remove service driver load/unload messages
  PCI/AER: Log AER IRQ when claiming Root Port
  PCI/AER: Log errors with PCI device, not PCIe service device
  PCI/AER: Remove unused version macros
  PCI/PME: Log PME IRQ when claiming Root Port
  PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors
  PCI: Move config space size macros to pci_regs.h
  x86/platform/intel-mid: Constify mid_pci_platform_pm
  PCI/ASPM: Don't retrain link if ASPM not possible
  PCI: iproc: Skip check for legacy IRQ on PAXC buses
  PCI: pciehp: Leave power indicator on when enabling already-enabled slot
  PCI: pciehp: Prioritize data-link event over presence detect
  PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar
  PCI: rcar: Use gen2 fallback compatibility last
  PCI: rcar-gen2: Use gen2 fallback compatibility last
  PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init()
  ..
2016-12-15 12:46:48 -08:00
Linus Torvalds 6df8b74b17 DeviceTree updates for 4.10:
- Add various vendor prefixes.
 
 - Fix NUMA node handling when "numa=off" is passed on kernel command
   line.
 
 - Coding style Clean-up of overlay handling code.
 
 - DocBook fixes in DT platform driver code
 
 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.
 
 - Couple of printk message fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYUqo6EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcMHiw//
 WIJH6XF8PkAEkITxChwb3kJ1y7PCtR7YmncMvnMRh9kIcyPwFjiDRqUz/0MiTHgD
 UJsFtX6057GWDd0mlUrQ8iFFlzdGLl2Xw4u6sr4bC7bGVK0Nj9QX+xrFmXCLtGj0
 wYkXIJXDXmLQJPKhG5np5jBYfJIaYr5FcNCwdOEljDDauHAg6f2hvgOby1X8FCOS
 oC3LCqvx4SWp9EcQAvOkKAJazsIlSAynb7EFwTaKo0RHJPzX/Uhp7RmyvAgeVZVE
 a2GS+YwboD3PMa7cjC3R7FwBXhuM/YQLLWfgSGwvr8nADP4a/iZNzJt1H0rU1LKP
 ukgSP5m58bt713H7Gr6OJ1ygAFmvFAzye+mXwHVxwqg3BFp141LCKoD0A2RO+zH8
 5cma2OTl9bQSWxtKJyLm4y9/QegaThyM/eZyk5j6XOjIEtlTS0h8H3ZHbU55k1HC
 7MJrnoAb3z5vGhxPplF1MOeGswz5vLME0e74Po0Nt8X7sdpj7zVWBL8AZh+Xyw2O
 d6oz9xYQVgJ5mqnnXXTWSqNfTM82+aUZV6SREaOJ1GjSy3pfd2s85N1oB8oIOb+o
 gRNYibbv/EvaOBqADwQoRWRTIW+0Vtf/vY1xVFB6Wd8XO2a/dmHZJ95jaPlAfwf3
 l5EqgsHP1kirkNYgCAUSpCkPf61gA+ZAWxjlfrARmCg=
 =1Sex
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - add various vendor prefixes.

 - fix NUMA node handling when "numa=off" is passed on kernel command
   line.

 - coding style Clean-up of overlay handling code.

 - DocBook fixes in DT platform driver code

 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.

 - a couple of printk message fixes.

* tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (33 commits)
  dt: pwm: bcm2835: fix typo in clocks property name
  devicetree: add vendor prefix for National Instruments
  Revert "of: base: add support to get machine model name"
  of: Fix issue where code would fall through to error case.
  drivers/of: fix missing pr_cont()s in of_print_phandle_args
  devicetree: bindings: Add vendor prefix for Oki
  devicetree: bindings: Add vendor prefix for Andes Technology Corporation
  dt-bindings: add MYIR Tech hardware vendor prefix
  add bindings document for altera freeze bridge
  ARM: socfpga: add bindings doc for arria10 fpga manager
  ARM: socfpga: add bindings document for fpga bridge drivers
  of: base: add support to get machine model name
  of/platform: clarify of_find_device_by_node refcounting
  of/platform: fix of_platform_device_destroy comment
  of: Remove unused variable overlay_symbols
  of: Move setting of pointer to beside test for non-null
  of: Add back an error message, restructured
  of: Update comments to reflect changes and increase clarity
  of: Remove redundant size check
  of: Update structure of code to be clearer, also remove BUG_ON()
  ...
2016-12-15 11:49:41 -08:00
Linus Torvalds e3842cbfe0 dmaengine updates for 4.10-rc1
Fairly routine update this time around with all changes specific to drivers.
 
  o New driver for STMicroelectronics FDMA
  o Memory-to-memory transfers on dw dmac
  o Support for slave maps on pl08x devices
  o Bunch of driver fixes to use dma_pool_zalloc
  o Bunch of compile and warning fixes spread across drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYUg7NAAoJEHwUBw8lI4NH5/gP/j81+2RzCUX8PiLQxNUt0Vj+
 tVJEizpWCwN1cnhc8ibZdI1DAwyj+GbN2lghYTjqqEng4yOm3czPzUl99grBrpQl
 t+Qylr9PSpck/paRhd2lgZzG8Nk+B5HJDcxBQbW4pwmbc69YAbqYzt44i4bDpR5K
 u3mBve1Ulng7peP45EZB8BA32ffCpOEAC/9SdkaPokrSv6XxxPEFvzewy+mLtioU
 a0zY0iuHqVGpOTABK65fXO/zkGiZLPXJ1T5vK7Iz8mOwuvtYVif0yktQSrx3BWbc
 9r64W7Si633wWt/C9LkuMMSmQ7nI/PyHk811cDOcxp3SA79JV5SWwdQl+5QPdtoP
 hyToaISfAY0BiNI9ltdscx3MPjlwSp08xXvi46RjSs8E2TXnbHUw+J5mTsxYuocl
 Yi61nlL5ClhCbySf9Q3GFsuAJ3O2Nq9WkCTNRIvJtrMhe3NeqDDTfBZJRD4Bfg1G
 q8RAc5oqGZDtqKHtLfwULr7Ec2Ru0hIZAyN907OwW+4jBR/eBJB1y+nGrNPtTWPT
 OOcvrxe85/+ZNROGCZKr0L8UA/MBBMZtjvMY8RMXjBE4YJbakq7tV+7l5VolKeNH
 G6I/1CC06qVPHrnetM6YejhtnmOQ4F8P1sE0wvpG0QTyHJoFq+aOhHNKJC8F9Eln
 CQM2apvL4BHvS7OHt9XL
 =Pf0d
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "Fairly routine update this time around with all changes specific to
  drivers:

   - New driver for STMicroelectronics FDMA
   - Memory-to-memory transfers on dw dmac
   - Support for slave maps on pl08x devices
   - Bunch of driver fixes to use dma_pool_zalloc
   - Bunch of compile and warning fixes spread across drivers"

[ The ST FDMA driver already came in earlier through the remoteproc tree ]

* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: sirf-dma: remove unused ‘sdesc’
  dmaengine: pl330: remove unused ‘regs’
  dmaengine: s3c24xx: remove unused ‘cdata’
  dmaengine: stm32-dma: remove unused ‘src_addr’
  dmaengine: stm32-dma: remove unused ‘dst_addr’
  dmaengine: stm32-dma: remove unused ‘sfcr’
  dmaengine: pch_dma: remove unused ‘cookie’
  dmaengine: mic_x100_dma: remove unused ‘data’
  dmaengine: img-mdc: remove unused ‘prev_phys’
  dmaengine: usb-dmac: remove unused ‘uchan’
  dmaengine: ioat: remove unused ‘res’
  dmaengine: ioat: remove unused ‘ioat_dma’
  dmaengine: ioat: remove unused ‘is_raid_device’
  dmaengine: pl330: do not generate unaligned access
  dmaengine: k3dma: move to dma_pool_zalloc
  dmaengine: at_hdmac: move to dma_pool_zalloc
  dmaengine: at_xdmac: don't restore unsaved status
  dmaengine: ioat: set error code on failures
  dmaengine: ioat: set error code on failures
  dmaengine: DW DMAC: add multi-block property to device tree
  ...
2016-12-14 20:42:45 -08:00
Linus Torvalds b78b499a67 Char/Misc driver patches for 4.10-rc1
Here's the big char/misc driver patches for 4.10-rc1.  Lots of tiny
 changes over lots of "minor" driver subsystems, the largest being some
 new FPGA drivers.  Other than that, a few other new drivers, but no new
 driver subsystems added for this kernel cycle, a nice change.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAtwA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykyCgCeJn36u1AsBi7qZ3u/1hwD8k56s2IAnRo6U31r
 WW65YcNTK7qYXqNbfgIa
 =/t/V
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
  changes over lots of "minor" driver subsystems, the largest being some
  new FPGA drivers. Other than that, a few other new drivers, but no new
  driver subsystems added for this kernel cycle, a nice change.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
  uio-hv-generic: store physical addresses instead of virtual
  Tools: hv: kvp: configurable external scripts path
  uio-hv-generic: new userspace i/o driver for VMBus
  vmbus: add support for dynamic device id's
  hv: change clockevents unbind tactics
  hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
  hyperv: Fix spelling of HV_UNKOWN
  mei: bus: enable non-blocking RX
  mei: fix the back to back interrupt handling
  mei: synchronize irq before initiating a reset.
  VME: Remove shutdown entry from vme_driver
  auxdisplay: ht16k33: select framebuffer helper modules
  MAINTAINERS: add git url for fpga
  fpga: Clarify how write_init works streaming modes
  fpga zynq: Fix incorrect ISR state on bootup
  fpga zynq: Remove priv->dev
  fpga zynq: Add missing \n to messages
  fpga: Add COMPILE_TEST to all drivers
  uio: pruss: add clk_disable()
  char/pcmcia: add some error checking in scr24x_read()
  ...
2016-12-13 12:11:01 -08:00
Reza Arbab 41a9ada3e6 of/fdt: mark hotpluggable memory
When movable nodes are enabled, any node containing only hotpluggable
memory is made movable at boot time.

On x86, hotpluggable memory is discovered by parsing the ACPI SRAT,
making corresponding calls to memblock_mark_hotplug().

If we introduce a dt property to describe memory as hotpluggable,
configs supporting early fdt may then also do this marking and use
movable nodes.

Link: http://lkml.kernel.org/r/1479160961-25840-5-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12 18:55:07 -08:00
Rob Herring 0a8b13eab1 Revert "of: base: add support to get machine model name"
This reverts commit e5269794d2.
2016-12-09 10:33:48 -06:00
Moritz Fischer 32bed310ad of: Fix issue where code would fall through to error case.
No longer fall through into the error case that prints out
an error if no error (err = 0) occurred.

Fixes d9181b20a83(of: Add back an error message, restructured)
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09 10:33:03 -06:00
Marcin Nowakowski 4aa6634440 drivers/of: fix missing pr_cont()s in of_print_phandle_args
Since the KERN_CONT changes, the current debug printks have a lot of
empty lines making the log messages very hard to read.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09 10:32:40 -06:00
Johan Hovold 3f65047c85 of_mdio: add helper to deregister fixed-link PHYs
Add helper to deregister fixed-link PHYs registered using
of_phy_register_fixed_link().

Convert the two drivers that care to deregister their fixed-link PHYs to
use the new helper, but note that most drivers currently fail to do so.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 23:17:02 -05:00
Sudeep Holla e5269794d2 of: base: add support to get machine model name
Currently platforms/drivers needing to get the machine model name are
replicating the same snippet of code. In some case, the OF reference
counting is either missing or incorrect.

This patch adds support to read the machine model name either using
the "model" or the "compatible" property in the device tree root node
to the core OF/DT code.

This can be used to remove all the duplicate code snippets doing exactly
same thing later.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-18 08:46:22 -06:00
Johan Hovold 3ae30f4ce6 of_mdio: fix device reference leak in of_phy_find_device
Make sure to drop the reference taken by bus_find_device() before
returning NULL from of_phy_find_device() when the found device is not a
PHY.

Fixes: 6ed742363b ("of: of_mdio: Ensure mdio device is a PHY")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17 12:05:04 -05:00
Johan Hovold 48c1699d53 of_mdio: fix node leak in of_phy_register_fixed_link error path
Make sure to drop the of_node reference also on failure to parse the
speed property in of_phy_register_fixed_link().

Fixes: 3be2a49e5c ("of: provide a binding for fixed link PHYs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17 12:05:04 -05:00
Johan Hovold 4fb373dfab of/platform: clarify of_find_device_by_node refcounting
Add comment clarifying that of_find_device_by_node() takes a reference
to the embedded struct device which needs to be dropped after use.

Note that most current users fail to do so.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:19 -06:00
Johan Hovold 71ec6f4f73 of/platform: fix of_platform_device_destroy comment
Update the comment to of_platform_device_destroy() to reflect that it no
longer returns a status value.

Fixes: 75f353b613 ("of/platform: Fix of_platform_device_destroy...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:18 -06:00
Frank Rowand 5581a95f2d of: Remove unused variable overlay_symbols
Remove unused pointer to node "__symbols__".

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:18 -06:00
Frank Rowand 4458db4c9b of: Move setting of pointer to beside test for non-null
Value of pointer was calculated in an earlier block than
where it was used.  Move it down into the block where it
is used, immediately before where is is checked to be valid.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:17 -06:00
Frank Rowand d9181b20a8 of: Add back an error message, restructured
Add a single pr_err() to cover a range of errors that were reported
by several pr_err() that were removed earlier in this series.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:17 -06:00
Frank Rowand 269f1a67d0 of: Update comments to reflect changes and increase clarity
Update comments to better explain what functions are doing.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:16 -06:00
Frank Rowand ea8229b788 of: Remove redundant size check
Remove a redundant check of buffer size.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:16 -06:00
Frank Rowand 624ab2a49c of: Update structure of code to be clearer, also remove BUG_ON()
Remove BUG_ON(), which is frowned upon and not needed here.
Restructure to remove some excessive complexity.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:15 -06:00
Frank Rowand 25e1687767 of: Rename variables to better reflect purpose or follow convention
Rename variables to better reflect what their purpose is.  As a side
effect, this reduces the need for some of the comments previously
removed in this series.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:15 -06:00
Frank Rowand fad556bf3f of: Remove prefix "__of_" from local function names
Remove "__of_" prefix from local function names.  The pattern of
a leading "__" is used in drivers/of/ to signify a function that
must be called with a lock held.  These functions do not fit
that pattern.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:14 -06:00
Frank Rowand f94823f2eb of: Rename functions to more accurately reflect what they do
Some function names are misleading or do not provide a good
sense of what they do.  Rename the functions to ne more
informative.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:14 -06:00
Frank Rowand 9f27ede49d of: Convert comparisons to zero or NULL to logical expressions
Convert comparisons to zero or NULL to logical expressions.  A
small number of such comparisons remain where they provide more
clarity of the numeric nature of a variable.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:13 -06:00
Frank Rowand 96d1c8e8e3 of: Remove excessive printks to reduce clutter.
Remove extra debug and error printks.  A single pr_err() will
be added at the end of this series to replace many of these
error messages.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:13 -06:00
Frank Rowand a67976ecc8 of: Remove comments that state the obvious, to reduce clutter
Remove comments that report what is obvious from the code.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:12 -06:00
David Daney b6cc9474e2 of, numa: Return NUMA_NO_NODE from disable of_node_to_nid() if nid not possible.
On arm64 NUMA kernels we can pass "numa=off" on the command line to
disable NUMA.  A side effect of this is that kmalloc_node() calls to
non-zero nodes will crash the system with an OOPS:

[    0.000000] ITS@0x0000901000020000: allocated 2097152 Devices @10002000000 (flat, esz 8, psz 64K, shr 1)
[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00001680
[    0.000000] pgd = fffffc0009470000
[    0.000000] [00001680] *pgd=0000010ffff90003, *pud=0000010ffff90003, *pmd=0000010ffff90003, *pte=0000000000000000
[    0.000000] Internal error: Oops: 96000006 [#1] SMP
.
.
.
[    0.000000] [<fffffc00081c8950>] __alloc_pages_nodemask+0xa4/0xe68
[    0.000000] [<fffffc000821fa70>] new_slab+0xd0/0x564
[    0.000000] [<fffffc0008221e24>] ___slab_alloc+0x2e4/0x514
[    0.000000] [<fffffc0008239498>] __slab_alloc+0x48/0x58
[    0.000000] [<fffffc0008222c20>] __kmalloc_node+0xd0/0x2dc
[    0.000000] [<fffffc0008115374>] __irq_domain_add+0x7c/0x164
[    0.000000] [<fffffc0008b461dc>] its_probe+0x784/0x81c
[    0.000000] [<fffffc0008b462bc>] its_init+0x48/0x1b0
[    0.000000] [<fffffc0008b4543c>] gic_init_bases+0x228/0x360
[    0.000000] [<fffffc0008b456bc>] gic_of_init+0x148/0x1cc
[    0.000000] [<fffffc0008b5aec8>] of_irq_init+0x184/0x298
[    0.000000] [<fffffc0008b43f9c>] irqchip_init+0x14/0x38
[    0.000000] [<fffffc0008b12d60>] init_IRQ+0xc/0x30
[    0.000000] [<fffffc0008b10a3c>] start_kernel+0x240/0x3b8
[    0.000000] [<fffffc0008b101c4>] __primary_switched+0x30/0x6c
[    0.000000] Code: 912ec2a0 b9403809 0a0902fb 37b007db (f9400300)
.
.
.

This is caused by code like this in kernel/irq/irqdomain.c

    domain = kzalloc_node(sizeof(*domain) + (sizeof(unsigned int) * size),
                  GFP_KERNEL, of_node_to_nid(of_node));

When NUMA is disabled, the concept of a node is really undefined, so
of_node_to_nid() should unconditionally return NUMA_NO_NODE.

Fix by returning NUMA_NO_NODE when the nid is not in the set of
possible nodes.

Reported-by: Gilbert Netzer <noname@pdc.kth.se>
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15 09:17:12 -06:00
Shawn Lin 9a1dc38912 of/pci: Add of_pci_get_max_link_speed() to parse max-link-speed from DT
This new helper function could be used by host drivers to get the limitaion
of max link speed provided by DT.  If the property isn't assigned or is
invalid, it will return -EINVAL to the caller.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
2016-11-14 15:21:14 -06:00
Greg Kroah-Hartman b7d91c9152 Merge 4.9-rc5 into char-misc-next
We want those fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14 16:39:47 +01:00
Hans de Goede c6c7d83b9c Revert "console: don't prefer first registered if DT specifies stdout-path"
This reverts commit 05fd007e46 ("console: don't prefer first
registered if DT specifies stdout-path").

The reverted commit changes existing behavior on which many ARM boards
rely.  Many ARM small-board-computers, like e.g.  the Raspberry Pi have
both a video output and a serial console.  Depending on whether the user
is using the device as a more regular computer; or as a headless device
we need to have the console on either one or the other.

Many users rely on the kernel behavior of the console being present on
both outputs, before the reverted commit the console setup with no
console= kernel arguments on an ARM board which sets stdout-path in dt
would look like this:

  [root@localhost ~]# cat /proc/consoles
  ttyS0                -W- (EC p a)    4:64
  tty0                 -WU (E  p  )    4:1

Where as after the reverted commit, it looks like this:

  [root@localhost ~]# cat /proc/consoles
  ttyS0                -W- (EC p a)    4:64

This commit reverts commit 05fd007e46 ("console: don't prefer first
registered if DT specifies stdout-path") restoring the original
behavior.

Fixes: 05fd007e46 ("console: don't prefer first registered if DT specifies stdout-path")
Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11 08:12:37 -08:00
Alan Tull 39a842e22c of/overlay: add of overlay notifications
This patch add of overlay notifications.

When DT overlays are being added, some drivers/subsystems
need to see device tree overlays before the changes go into
the live tree.

This is distinct from reconfig notifiers that are
post-apply or post-remove and which issue very granular
notifications without providing access to the context
of a whole overlay.

The following 4 notificatons are issued:
  OF_OVERLAY_PRE_APPLY
  OF_OVERLAY_POST_APPLY
  OF_OVERLAY_PRE_REMOVE
  OF_OVERLAY_POST_REMOVE

In the case of pre-apply notification, if the notifier
returns error, the overlay will be rejected.

This patch exports two functions for registering/unregistering
notifications:
  of_overlay_notifier_register(struct notifier_block *nb)
  of_overlay_notifier_unregister(struct notifier_block *nb)

The of_mutex is held during these notifications. The
notification data includes pointers to the overlay target
and the overlay:

struct of_overlay_notify_data {
       struct device_node *overlay;
       struct device_node *target;
};

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10 17:03:35 +01:00
Sinan Kaya 5282c18166 of: irq: make of_msi_configure accessible from modules
The of_msi_configure routine is only accessible by the built-in
kernel drivers. Export this function so that modules can use it
too.

This function is useful for configuring MSI on child device tree
nodes on hierarchical objects.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-19 19:02:58 +05:30
Linus Torvalds 133d970e0d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
2016-10-15 09:26:12 -07:00
Linus Torvalds 56e520c7a0 IOMMU Updates for Linux v4.9
Including:
 
 	* Support for interrupt virtualization in the AMD IOMMU driver.
 	  These patches were shared with the KVM tree and are already
 	  merged through that tree.
 
 	* Generic DT-binding support for the ARM-SMMU driver. With this
 	  the driver now makes use of the generic DMA-API code. This
 	  also required some changes outside of the IOMMU code, but
 	  these are acked by the respective maintainers.
 
 	* More cleanups and fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJX/PmUAAoJECvwRC2XARrjyloP/1hymxXC2yXZ4EIBTHSO5X+c
 jSJaGTIbQAdQDpllscSNJ0Au43L3vGtJcHo4JqwEERNlwLsU82LH7QJhq+q1La/b
 5cPaY5gI3E++qxQt8umuZJAIUQthFYrfGoS5lJc5t5r/d8iVsLWbW4VkR19/1o7A
 4/Uz7ETmi9VVy8Hkvumx+PQ0VHJet381KB7ud9LU5Spim0En2AAGwZXLMkmxXd2W
 uDQ+O1rlDVc2/ka3+GmfZEml5EASWRqS/MTNoU/ZbQGYWKCWygXbuiqt6gLudWjx
 dCR1Knh68b0gN6k/QAj8XY/1gkfmZ3YkfS0AHIMLYTFRT51BuxOrkXrBdkYnWEBv
 UirmaiV87SlR1j83yb3ZmjpBPvd2sGWYFDqY1P0riLutjGUS6zycWWs13olvbfbz
 SFrH7PT7JPQGYprI1oVn4ihszjN1NZ4+Gj7QBhyFW6FtvqTzmaFVsMOlDIeg1FwR
 k8cOzov4NG33Bp4IpsHK8e0/qV6K3oJOiOQgCyQp9kPKK+UWv9v9+HaEA7npJuRV
 c+lTE6j3G4LjEoVybkqm8TiPKxTMVNjUjgA3kwB2yNkCQT7hTCNYIAFrtfCYjYdo
 B1dnFE7feVqtoimnu2qvkVs59hWlF7Hc3RRHoBxMmO8DLwl9n2OcmoQIeCTsviss
 i9aNwC9bzBs+Hd3X/psB
 =1hFE
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - support for interrupt virtualization in the AMD IOMMU driver. These
   patches were shared with the KVM tree and are already merged through
   that tree.

 - generic DT-binding support for the ARM-SMMU driver. With this the
   driver now makes use of the generic DMA-API code. This also required
   some changes outside of the IOMMU code, but these are acked by the
   respective maintainers.

 - more cleanups and fixes all over the place.

* tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits)
  iommu/amd: No need to wait iommu completion if no dte irq entry change
  iommu/amd: Free domain id when free a domain of struct dma_ops_domain
  iommu/amd: Use standard bitmap operation to set bitmap
  iommu/amd: Clean up the cmpxchg64 invocation
  iommu/io-pgtable-arm: Check for v7s-incapable systems
  iommu/dma: Avoid PCI host bridge windows
  iommu/dma: Add support for mapping MSIs
  iommu/arm-smmu: Set domain geometry
  iommu/arm-smmu: Wire up generic configuration support
  Docs: dt: document ARM SMMU generic binding usage
  iommu/arm-smmu: Convert to iommu_fwspec
  iommu/arm-smmu: Intelligent SMR allocation
  iommu/arm-smmu: Add a stream map entry iterator
  iommu/arm-smmu: Streamline SMMU data lookups
  iommu/arm-smmu: Refactor mmu-masters handling
  iommu/arm-smmu: Keep track of S2CR state
  iommu/arm-smmu: Consolidate stream map entry state
  iommu/arm-smmu: Handle stream IDs more dynamically
  iommu/arm-smmu: Set PRIVCFG in stage 1 STEs
  iommu/arm-smmu: Support non-PCI devices with SMMUv3
  ...
2016-10-11 12:52:41 -07:00
Linus Torvalds 35ff96dfd3 MTD updates for 4.9-rc1
NAND:
 
  * Add the infrastructure to automate NAND timings configuration
  * Provide a generic DT property to maximize ECC strength
  * Some refactoring in the core bad block table handling, to help with
    improving some of the logic in error cases.
  * Minor cleanups and fixes
 
 MTD:
 
  * Add APIs for handling page pairing; this is necessary for reliably
    supporting MLC and TLC NAND flash, where paired-page disturbance affects
    reliability. Upper layers (e.g., UBI) should make use of these in the near
    future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX+cr9AAoJEFySrpd9RFgtSmcP/AvaNRXlrmKbZKg07kpJj3Ja
 XtxhftUwz7ncbjls99TD6ObGxWThIJ8U3oLsI5yoofJWiik5KaUk4jXUIVkGF5hm
 m1cDUX4biCwctdJzG03jboquFgwKP/atxxFCvEigauW3EafmUL4KrkrQ/bqOu7qN
 TDDyDL2K+v96lR2lYhCxWMZHcwK2ORGxbxdxfTqVE/NMLk217gHcrJEfJISPodfb
 A9dU/h7gLYF49E5L04Cko1I5HTnyhGPjQGIB/h8dIUlxtrzy1NRGG3IYo5gkdbve
 7yRSzbQB0jokcFdz1kg2SLXJZRArs9pYWUkFGGnYFaDGuFentyySaKgs+SO9gJHG
 wY48IL+RFlR0PF2PKVSdXLf9vgcjoVg9Oi2X5Ap4QJDZaTQqf0P0uz4aRTUbphQx
 /zY6X4Z6DWUXmLncz2tJ+ruwGoEZaUdXvX3/2ov0UnDjZ+w8hGuNNscE6xrrnKGf
 S9qiGOkxamS1Sg+jy2IWb/KBkkZgDXRkt02HecPJtV6kkA0fyLe281FiQU2/BHsb
 +aPA2zavaNMY+UGSkPci2kMZ0lMuIWxTDmH1L1XnscLsowHGrPd9D04zdeZNEP74
 mSnMrldlCt8xWD3xKV6Knh9AgPkXCB9MrsumrG9/RTpplnvEAPfic2YU7hRftKkn
 BJZXNhX1pg4qqhcHT0O5
 =/PuY
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "I've not been very active this cycle, so these are mostly from Boris,
  for the NAND flash subsystem.

  NAND:

   - Add the infrastructure to automate NAND timings configuration

   - Provide a generic DT property to maximize ECC strength

   - Some refactoring in the core bad block table handling, to help with
     improving some of the logic in error cases.

   - Minor cleanups and fixes

  MTD:

   - Add APIs for handling page pairing; this is necessary for reliably
     supporting MLC and TLC NAND flash, where paired-page disturbance
     affects reliability. Upper layers (e.g., UBI) should make use of
     these in the near future"

* tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd: (35 commits)
  mtd: nand: fix trivial spelling error
  mtdpart: Propagate _get/put_device()
  mtd: nand: Provide nand_cleanup() function to free NAND related resources
  mtd: Kill the OF_MTD Kconfig option
  mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTD
  mtd: nand: Fix nand_command_lp() for 8bits opcodes
  mtd: nand: sunxi: Support ECC maximization
  mtd: nand: Support maximizing ECC when using software BCH
  mtd: nand: Add an option to maximize the ECC strength
  mtd: nand: mxc: Add timing setup for v2 controllers
  mtd: nand: mxc: implement onfi get/set features
  mtd: nand: sunxi: switch from manual to automated timing config
  mtd: nand: automate NAND timings selection
  mtd: nand: Expose data interface for ONFI mode 0
  mtd: nand: Add function to convert ONFI mode to data_interface
  mtd: nand: convert ONFI mode into data interface
  mtd: nand: Introduce nand_data_interface
  mtd: nand: Create a NAND reset function
  mtd: nand: remove unnecessary 'extern' from function declarations
  MAINTAINERS: Add maintainer entry for Ingenic JZ4780 NAND driver
  ...
2016-10-10 17:39:51 -07:00
Paul Burton 05fd007e46 console: don't prefer first registered if DT specifies stdout-path
If a device tree specifies a preferred device for kernel console output
via the stdout-path or linux,stdout-path chosen node properties or the
stdout alias then the kernel ought to honor it & output the kernel
console to that device.  As it stands, this isn't the case.  Whilst we
parse the stdout-path properties & set an of_stdout variable from
of_alias_scan(), and use that from of_console_check() to determine
whether to add a console device as a preferred console whilst
registering it, we also prefer the first registered console if no other
has been selected at the time of its registration.

This means that if a console other than the one the device tree selects
via stdout-path is registered first, we will switch to using it & when
the stdout-path console is later registered the call to
add_preferred_console() via of_console_check() is too late to do
anything useful.  In practice this seems to mean that we switch to the
dummy console device fairly early & see no further console output:

    Console: colour dummy device 80x25
    console [tty0] enabled
    bootconsole [ns16550a0] disabled

Fix this by not automatically preferring the first registered console if
one is specified by the device tree.  This allows consoles to be
registered but not enabled, and once the driver for the console selected
by stdout-path calls of_console_check() the driver will be added to the
list of preferred consoles before any other console has been enabled.
When that console is then registered via register_console() it will be
enabled as expected.

Link: http://lkml.kernel.org/r/20160809151937.26118-1-paul.burton@imgtec.com
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ivan Delalande <colona@arista.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Paul Burton ecd76eded0 of/platform: Probe "isa" busses by default
Since commit 44a7185c2a ("of/platform: Add common method to populate
default bus") platforms calling of_platform_bus_probe from an initcall
is either a rather unsafe race with of_platform_default_populate_init or
a no-op. The MIPS Malta board needs to probe devices under an ISA bus,
which we do support in the of_busses array but until now haven't
included in of_default_bus_match_table.

Add an "isa" entry to of_default_bus_match_table such that we can just
accept use of of_platform_default_populate_init & remove the
Malta-specific match table in a later patch.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14275/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:00 +02:00
Linus Torvalds 878fb5dc96 DeviceTree updates for 4.9:
- Update changeset documentation on locking to reflect current code
 
 - Fix alphabetizing of vendor-prefixes.txt
 
 - Add various vendor prefixes
 
 - Add ESP8089 WiFi binding
 
 - Add new variable sized array parsing functions
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9P3RAAoJEPr7XbWNvGHDxfsQAI2mZd8cY6CdQyfFOFZutNHd
 toTFzPiouCWMNLjS/+q1jJ1HGmgEbxPjC/10gVdpOwQo38R9hVqJm3e9KhbaPjI8
 rn03uUE/aChbfrbJHQGoisiuHXwYz09ddDoZZ4XrlVDx1naJPXn9xqgmfiTR+TVm
 VkUlqj8JkIBkgYb6Hk4gJIoGtl+jPGFjw9dCXKJlh4fjxKQd/KNWnNN9DRlPz8kY
 ektcN85lsTTGNaEC9VCbHqo5nfvjJN1NIuU9JugQ61uZ8eYNx52fWM+Q/cTp7gvP
 dkyDJIXrfo6SUmURTtSOuGKhiqFAQgu6qs4XukAlIzrQlIcW0ptQi4fCZyyVfXQk
 esjmyMHC9aqpwLfu3j27ULEJcvradelCuXp4F6xOdRVkmXukxPulTXQMZQh6LwCY
 m/4GyEfqfjoDk+rojloyEFU3PuvL9A3jWBgOJBwLVEU8HTxY3lmA5HVKT1e0jYUR
 P1uiLw9FrF2fgZX9Pn/7ZkEGFfIYn64MR2xWdlim8AHVLd74/So0l05azZCUVECG
 1/8/YHG24ENm34qSAHb6/EdGqQntYzbJwvg5L+vmI5CC3jvF4kcLuYQUI+2wiLKw
 4LfkjpSJXIj5NNxncS0NeqJwisxBRiTwmMLpyN2K7vwsx9pdxotU6giEEMRC8lgm
 BxzPOOP62glEV4xm+7Km
 =lH0i
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - update changeset documentation on locking to reflect current code

 - fix alphabetizing of vendor-prefixes.txt

 - add various vendor prefixes

 - add ESP8089 WiFi binding

 - add new variable sized array parsing functions

* tag 'devicetree-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits)
  DT: irqchip: renesas-irqc: document R8A7743/5 support
  dt-bindings: Add Keith&Koep vendor prefix
  dt-bindings: add vendor prefix for Auvidea GmbH
  of: Add vendor prefix for Engicam s.r.l company
  devicetree: Add vendor-prefix for Silead Inc.
  devicetree: bindings: Add vendor prefix for Topeet.
  dt-bindings: Add summit vendor id
  of/platform: Initialise dev->fwnode appropriately
  of: Add array read functions with min/max size limits
  of: Make of_find_property_value_of_size take a length range
  dt: net: enhance DWC EQoS binding to support Tegra186
  bindings: PCI: artpec: correct pci binding example
  Documentation: devicetree: Fix max77693 spelling errors
  dt: bindings: Add binding for ESP8089 wifi chips
  PCI: Xilinx NWL PCIe: Updating device tree documentation with prefetchable memory space
  Documentation: devicetree: spi: fix wrong spi-bus documentation
  dt-bindings: Add Japan Display Inc vendor id
  dt-bindings: vendor-prefixes: Add Sierra Wireless
  devicetree: Add vendor prefix for Shenzhen Sunchip Technology Co., Ltd
  devicetree: Sort vendor prefixes in alphabetical order
  ...
2016-10-05 11:56:38 -07:00
Linus Torvalds e6dce825fb TTY/Serial patches for 4.9-rc1
Here is the big TTY and Serial patch set for 4.9-rc1.
 
 It also includes some drivers/dma/ changes, as those were needed by some
 serial drivers, and they were all acked by the DMA maintainer.  Also in
 here is the long-suffering ACPI SPCR patchset, which was passed around
 from maintainer to maintainer like a hot-potato.  Seems I was the
 sucker^Wlucky one.  All of those patches have been acked by the various
 subsystem maintainers as well.
 
 All of this has been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlfyNjEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspwIcAn2uN
 qCD8xQJ0Cs61hD1nUzhNygG8AJ94I4zz/fPGpyh/CtJfLQwtUdLhNA==
 =Rken
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big tty and serial patch set for 4.9-rc1.

  It also includes some drivers/dma/ changes, as those were needed by
  some serial drivers, and they were all acked by the DMA maintainer.

  Also in here is the long-suffering ACPI SPCR patchset, which was
  passed around from maintainer to maintainer like a hot-potato. Seems I
  was the sucker^Wlucky one. All of those patches have been acked by the
  various subsystem maintainers as well.

  All of this has been in linux-next with no reported issues"

* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
  Revert "serial: pl011: add console matching function"
  MAINTAINERS: update entry for atmel_serial driver
  serial: pl011: add console matching function
  ARM64: ACPI: enable ACPI_SPCR_TABLE
  ACPI: parse SPCR and enable matching console
  of/serial: move earlycon early_param handling to serial
  Revert "drivers/tty: Explicitly pass current to show_stack"
  tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
  nios2: dts: 10m50: Add tx-threshold parameter
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  serial: 8250: of: Load TX FIFO Threshold from DT
  Documentation: dt: serial: Add TX FIFO threshold parameter
  drivers/tty: Explicitly pass current to show_stack
  serial: imx: Fix DCD reading
  serial: stm32: mark symbols static where possible
  serial: xuartps: Add some register initialisation to cdns_early_console_setup()
  serial: xuartps: Removed unwanted checks while reading the error conditions
  serial: xuartps: Rewrite the interrupt handling logic
  serial: stm32: use mapbase instead of membase for DMA
  tty/serial: atmel: fix fractional baud rate computation
  ...
2016-10-03 20:11:49 -07:00
Leif Lindholm d503187b6c of/serial: move earlycon early_param handling to serial
We have multiple "earlycon" early_param handlers - merge the DT one into
the main earlycon one.  It's a cleanup that also will be useful
to defer setting up DT console until ACPI/DT decision is made.

Rename the exported function to avoid clashing with the function from
arch/microblaze/kernel/prom.c

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28 17:43:15 +02:00
Boris Brezillon a9843193ce mtd: Kill the OF_MTD Kconfig option
Commit d48f62b9a0 ("mtd: nand: move of_get_nand_xxx() helpers into
nand_base.c") removed the drivers/of/of_mtd.c file but did not remove
the associated OF_MTD Kconfig option.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23 09:35:16 +02:00
Robin Murphy 987068fcbd of/irq: Break out msi-map lookup (again)
The PCI msi-map code is already doing double-duty translating IDs and
retrieving MSI parents, which unsurprisingly is the same functionality
we need for the identically-formatted PCI iommu-map property. Drag the
core parsing routine up yet another layer into the general OF-PCI code,
and further generalise it for either kind of lookup in either flavour
of map property.

Acked-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-16 09:34:14 +01:00
Robin Murphy f94277af03 of/platform: Initialise dev->fwnode appropriately
Whilst we're some of the way towards a universal firmware property
interface, drivers which deal with both OF and ACPI probing end up
having to do things like this:

    dev->of_node ? &dev->of_node->fwnode : dev->fwnode

This seems unnecessary, when the OF code could instead simply fill in
the device's fwnode when binding the of_node, and let the drivers use
dev->fwnode either way. Let's give it a go and see what falls out.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15 08:35:56 -05:00
Richard Fitzgerald a67e9472da of: Add array read functions with min/max size limits
Add a new set of array reading functions that take a minimum and
maximum size limit and will fail if the property size is not within
the size limits. This makes it more convenient for drivers that
use variable-size DT arrays which must be bounded at both ends -
data must be at least N entries but must not overflow the array
it is being copied into. It is also more efficient than making this
functionality out of existing public functions and avoids duplication.

The existing array functions have been left in the API, since there
are a very large number of clients of those functions and their
existing functionality is still useful. This avoids turning a small
API improvement into a major kernel rework.

The old functions have been turned into mininmal static inlines calling
the new functions. The old functions had no upper limit on the actual
size of the dts entry, to preserve this functionality rather than keeping
two near-identical implementations, if the new function is called with
max=0 there is no limit on the size of the dts entry but only the min
number of elements are read.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15 08:33:01 -05:00
Richard Fitzgerald 79ac5d31df of: Make of_find_property_value_of_size take a length range
In preparation for adding variable-length array reads, change
of_find_property_value_of_size so that it takes an optional
maximum length. If the maximum is passed as 0, the behaviour is
unchanged and it will return a property if it's >= the requested
minimum length. If maximum is non-zero it will only return a
property whose length is min <= l <= max.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15 08:32:57 -05:00
Kefeng Wang ad02180515 of_numa: Use pr_fmt()
Use pr_fmt to prefix kernel output.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:59:09 +01:00
Kefeng Wang 837dae1b43 of_numa: Use of_get_next_parent to simplify code
Use of_get_next_parent() instead of open-code.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:59:08 +01:00
Zhen Lei 9787ed6e5c of/numa: remove a duplicated warning
This warning has been printed in of_numa_parse_cpu_nodes before.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:59:08 +01:00
Zhen Lei 571a588fec of/numa: add nid check for memory block
If the numa-id which was configured in memory@ devicetree node is greater
than MAX_NUMNODES, we should report a warning. We have done this for cpus
and distance-map dt nodes, this patch help them to be consistent.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:59:08 +01:00
Zhen Lei 84b14256c1 of/numa: fix a memory@ node can only contains one memory block
For a normal memory@ devicetree node, its reg property can contains more
memory blocks.

Because we don't known how many memory blocks maybe contained, so we try
from index=0, increase 1 until error returned(the end).

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:59:08 +01:00
Zhen Lei 16a82f06c4 of/numa: remove a duplicated pr_debug information
This information will be printed in the subfunction numa_add_memblk.
They are not the same, but very similar.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:59:08 +01:00
Lucas Stach 34276bb062 of: fix reference counting in of_graph_get_endpoint_by_regs
The called of_graph_get_next_endpoint() already decrements the refcount
of the prev node, so it is wrong to do it again in the calling function.

Use the for_each_endpoint_of_node() helper to interate through the
endpoint OF nodes, which already does the right thing and simplifies
the code a bit.

Fixes: 8ccd0d0ca0
(of: add helper for getting endpoint node of specific identifiers)
Cc: stable@vger.kernel.org
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-15 11:15:05 -05:00
Kevin Hao fc520f8b4f of/platform: disable the of_platform_default_populate_init() for all the ppc boards
With the commit 44a7185c2a ("of/platform: Add common method to
populate default bus"), a default function is introduced to populate
the default bus and this function is invoked at the arch_initcall_sync
level. But a lot of ppc boards use machine_device_initcall() to
populate the default bus. This means that the default populate function
has higher priority and would override the arch specific population of
the bus. The side effect is that some arch specific bus are not probed,
then cause various malfunction due to the miss of some devices. Since
it is very possible to introduce bugs if we simply change the initcall
level for all these boards(about 30+). This just disable this default
function for all the ppc boards.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-12 14:27:29 -05:00
Philipp Zabel e55aeb6ba4 of/irq: Mark interrupt controllers as populated before initialisation
That way the init callback may clear the flag again, in case of drivers
split between early irq chip and a normal platform driver.

Fixes: 15cc2ed6dc ("of/irq: Mark initialised interrupt controllers as populated")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-09 12:36:28 -05:00
Gavin Shan 89c67752ae drivers/of: Validate device node in __unflatten_device_tree()
@mynodes is set to NULL when __unflatten_device_tree() is called
to unflatten device sub-tree in PCI hot add scenario on PowerPC
PowerNV platform. Marking @mynodes detached unconditionally causes
kernel crash as below backtrace shows:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000b26f64
cpu 0x0: Vector: 300 (Data Access) at [c000003fcc7cf740]
    pc: c000000000b26f64: __unflatten_device_tree+0xf4/0x190
    lr: c000000000b26f40: __unflatten_device_tree+0xd0/0x190
    sp: c000003fcc7cf9c0
   msr: 900000000280b033
   dar: 0
 dsisr: 40000000
  current = 0xc000003fcc281680
  paca    = 0xc00000000ff00000	 softe: 0	 irq_happened: 0x01
    pid   = 2724, comm = sh
Linux version 4.7.0-gavin-07754-g92a6836 (gwshan@gwshan) (gcc version \
4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #539 SMP Mon Aug 1 \
12:40:29 AEST 2016
enter ? for help
[c000003fcc7cfa50] c000000000b27060 of_fdt_unflatten_tree+0x60/0x90
[c000003fcc7cfaa0] c0000000004c6288 pnv_php_set_slot_power_state+0x118/0x440
[c000003fcc7cfb80] c0000000004c6a10 pnv_php_enable+0xc0/0x170
[c000003fcc7cfbd0] c0000000004c4d80 power_write_file+0xa0/0x190
[c000003fcc7cfc50] c0000000004be93c pci_slot_attr_store+0x3c/0x60
[c000003fcc7cfc70] c0000000002d3fd4 sysfs_kf_write+0x94/0xc0
[c000003fcc7cfcb0] c0000000002d2c30 kernfs_fop_write+0x180/0x260
[c000003fcc7cfd00] c000000000230fe0 __vfs_write+0x40/0x190
[c000003fcc7cfd90] c000000000232278 vfs_write+0xc8/0x240
[c000003fcc7cfde0] c000000000233d90 SyS_write+0x60/0x110
[c000003fcc7cfe30] c000000000009524 system_call+0x38/0x108

This avoids the kernel crash by marking @mynodes detached only when
@mynodes is dereferencing valid device node in __unflatten_device_tree().

Fixes: 1d1bde550e ("of: fdt: mark unflattened tree as detached")
Reported-by: Meng Li <shlimeng@cn.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-09 12:36:27 -05:00
Markus Elfring beab47d55b of: Delete an unnecessary check before the function call "of_node_put"
The of_node_put() function tests whether its argument is NULL
and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-08-09 12:36:27 -05:00
Kees Cook 529182e204 ramoops: use DT reserved-memory bindings
Instead of a ramoops-specific node, use a child node of /reserved-memory.
This requires that of_platform_device_create() be explicitly called
for the node, though, since "/reserved-memory" does not have its own
"compatible" property.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
2016-08-05 11:21:36 -07:00
Linus Torvalds bad60e6f25 powerpc updates for 4.8 # 1
Highlights:
  - PowerNV PCI hotplug support.
  - Lots more Power9 support.
  - eBPF JIT support on ppc64le.
  - Lots of cxl updates.
  - Boot code consolidation.
 
 Bug fixes:
  - Fix spin_unlock_wait() from Boqun Feng
  - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling
  - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
  - mm: Ensure "special" zones are empty from Oliver O'Halloran
  - ftrace: Separate the heuristics for checking call sites from Michael Ellerman
  - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman
  - Fix endianness when reading TCEs from Alexey Kardashevskiy
  - start rtasd before PCI probing from Greg Kurz
  - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler
  - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu
 
 Cleanups & fixes:
  - Drop support for MPIC in pseries from Rashmica Gupta
  - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
  - Remove unused symbols in asm-offsets.c from Rashmica Gupta
  - Fix SRIOV not building without EEH enabled from Russell Currey
  - Remove kretprobe_trampoline_holder. from Thiago Jung Bauermann
  - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt
  - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh
  - Avoid -maltivec when using clang integrated assembler from Anton Blanchard
  - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
  - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes
  - export cpu_to_core_id() from Mauricio Faria de Oliveira
  - Remove old symbols from defconfigs from Andrew Donnellan
  - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt
  - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt
  - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao
  - Remove RELOCATABLE_PPC32 from Kevin Hao
  - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh
 
 Minor cleanups & fixes:
  - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
    Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang
    Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman,
    Stephen Rothwell, Stewart Smith.
 
 Freescale updates from Scott:
  - "Highlights include more 8xx optimizations, device tree updates,
    and MVME7100 support."
 
 PowerNV PCI hotplug from Gavin Shan:
  - PCI: Add pcibios_setup_bridge()
  - Override pcibios_setup_bridge()
  - Remove PCI_RESET_DELAY_US
  - Move pnv_pci_ioda_setup_opal_tce_kill() around
  - Increase PE# capacity
  - Allocate PE# in reverse order
  - Create PEs in pcibios_setup_bridge()
  - Setup PE for root bus
  - Extend PCI bridge resources
  - Make pnv_ioda_deconfigure_pe() visible
  - Dynamically release PE
  - Update bridge windows on PCI plug
  - Delay populating pdn
  - Support PCI slot ID
  - Use PCI slot reset infrastructure
  - Introduce pnv_pci_get_slot_id()
  - Functions to get/set PCI slot state
  - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
  - Print correct PHB type names
 
 Power9 idle support from Shreyas B. Prabhu:
  - set power_save func after the idle states are initialized
  - Use PNV_THREAD_WINKLE macro while requesting for winkle
  - make hypervisor state restore a function
  - Rename idle_power7.S to idle_book3s.S
  - Rename reusable idle functions to hardware agnostic names
  - Make pnv_powersave_common more generic
  - abstraction for saving SPRs before entering deep idle states
  - Add platform support for stop instruction
  - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
  - cpuidle/powernv: cleanup cpuidle-powernv.c
  - cpuidle/powernv: Add support for POWER ISA v3 idle states
  - Use deepest stop state when cpu is offlined
 
 Power9 PMU from Madhavan Srinivasan:
  - factor out power8 pmu macros and defines
  - factor out power8 pmu functions
  - factor out power8 __init_pmu code
  - Add power9 event list macros for generic and cache events
  - Power9 PMU support
  - Export Power9 generic and cache events to sysfs
 
 Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
  - Add XICS emulation APIs
  - Move a few exception common handlers to make room
  - Add support for HV virtualization interrupts
  - Add mechanism to force a replay of interrupts
  - Add ICP OPAL backend
  - Discover IODA3 PHBs
  - pci: Remove obsolete SW invalidate
  - opal: Add real mode call wrappers
  - Rename TCE invalidation calls
  - Remove SWINV constants and obsolete TCE code
  - Rework accessing the TCE invalidate register
  - Fallback to OPAL for TCE invalidations
  - Use the device-tree to get available range of M64's
  - Check status of a PHB before using it
  - pci: Don't try to allocate resources that will be reassigned
 
 Other Power9:
  - Send SIGBUS on unaligned copy and paste from Chris Smart
  - Large Decrementer support from Oliver O'Halloran
  - Load Monitor Register Support from Jack Miller
 
 Performance improvements from Anton Blanchard:
  - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
  - Avoid load hit store in setup_sigcontext()
  - Remove assembly versions of strcpy, strcat, strlen and strcmp
  - Align hot loops of some string functions
 
 eBPF JIT from Naveen N. Rao:
  - Fix/enhance 32-bit Load Immediate implementation
  - Optimize 64-bit Immediate loads
  - Introduce rotate immediate instructions
  - A few cleanups
  - Isolate classic BPF JIT specifics into a separate header
  - Implement JIT compiler for extended BPF
 
 Operator Panel driver from Suraj Jitindar Singh:
  - devicetree/bindings: Add binding for operator panel on FSP machines
  - Add inline function to get rc from an ASYNC_COMP opal_msg
  - Add driver for operator panel on FSP machines
 
 Sparse fixes from Daniel Axtens:
  - make some things static
  - Introduce asm-prototypes.h
  - Include headers containing prototypes
  - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
  - kvm: Clarify __user annotations
  - Pass endianness to sparse
  - Make ppc_md.{halt, restart} __noreturn
 
 MM fixes & cleanups from Aneesh Kumar K.V:
  - radix: Update LPCR HR bit as per ISA
  - use _raw variant of page table accessors
  - Compile out radix related functions if RADIX_MMU is disabled
  - Clear top 16 bits of va only on older cpus
  - Print formation regarding the the MMU mode
  - hash: Update SDR1 size encoding as documented in ISA 3.0
  - radix: Update PID switch sequence
  - radix: Update machine call back to support new HCALL.
  - radix: Add LPID based tlb flush helpers
  - radix: Add a kernel command line to disable radix
  - Cleanup LPCR defines
 
 Boot code consolidation from Benjamin Herrenschmidt:
  - Move epapr_paravirt_early_init() to early_init_devtree()
  - cell: Don't use flat device-tree after boot
  - ge_imp3a: Don't use the flat device-tree after boot
  - mpc85xx_ds: Don't use the flat device-tree after boot
  - mpc85xx_rdb: Don't use the flat device-tree after boot
  - Don't test for machine type in rtas_initialize()
  - Don't test for machine type in smp_setup_cpu_maps()
  - dt: Add of_device_compatible_match()
  - Factor do_feature_fixup calls
  - Move 64-bit feature fixup earlier
  - Move 64-bit memory reserves to setup_arch()
  - Use a cachable DART
  - Move FW feature probing out of pseries probe()
  - Put exception configuration in a common place
  - Remove early allocation of the SMU command buffer
  - Move MMU backend selection out of platform code
  - pasemi: Remove IOBMAP allocation from platform probe()
  - mm/hash: Don't use machine_is() early during boot
  - Don't test for machine type to detect HEA special case
  - pmac: Remove spurrious machine type test
  - Move hash table ops to a separate structure
  - Ensure that ppc_md is empty before probing for machine type
  - Move 64-bit probe_machine() to later in the boot process
  - Move 32-bit probe() machine to later in the boot process
  - Get rid of ppc_md.init_early()
  - Move the boot time info banner to a separate function
  - Move setting of {i,d}cache_bsize to initialize_cache_info()
  - Move the content of setup_system() to setup_arch()
  - Move cache info inits to a separate function
  - Re-order the call to smp_setup_cpu_maps()
  - Re-order setup_panic()
  - Make a few boot functions __init
  - Merge 32-bit and 64-bit setup_arch()
 
 Other new features:
  - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
  - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
  - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
  - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
  - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
  - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
  - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
  - Add a parameter to disable 1TB segs from Oliver O'Halloran
  - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
  - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
  - pseries: Add pseries hotplug workqueue from John Allen
  - pseries: Add support for hotplug interrupt source from John Allen
  - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
  - pseries: Move property cloning into its own routine from Nathan Fontenot
  - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
  - pseries: Auto-online hotplugged memory from Nathan Fontenot
  - pseries: Remove call to memblock_add() from Nathan Fontenot
 
 cxl:
  - Add set and get private data to context struct from Michael Neuling
  - make base more explicitly non-modular from Paul Gortmaker
  - Use for_each_compatible_node() macro from Wei Yongjun
  - Frederic Barrat
    - Abstract the differences between the PSL and XSL
    - Make vPHB device node match adapter's
  - Philippe Bergheaud
    - Add mechanism for delivering AFU driver specific events
    - Ignore CAPI adapters misplaced in switched slots
    - Refine slice error debug messages
  - Andrew Donnellan
    - static-ify variables to fix sparse warnings
    - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
    - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
    - Add cxl_check_and_switch_mode() API to switch bi-modal cards
    - remove dead Kconfig options
    - fix potential NULL dereference in free_adapter()
  - Ian Munsie
    - Update process element after allocating interrupts
    - Add support for CAPP DMA mode
    - Fix allowing bogus AFU descriptors with 0 maximum processes
    - Fix allocating a minimum of 2 pages for the SPA
    - Fix bug where AFU disable operation had no effect
    - Workaround XSL bug that does not clear the RA bit after a reset
    - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
    - powerpc/powernv: Split cxl code out into a separate file
    - Add cxl_slot_is_supported API
    - Enable bus mastering for devices using CAPP DMA mode
    - Move cxl_afu_get / cxl_afu_put to base
    - Allow a default context to be associated with an external pci_dev
    - Do not create vPHB if there are no AFU configuration records
    - powerpc/powernv: Add support for the cxl kernel api on the real phb
    - Add support for using the kernel API with a real PHB
    - Add kernel APIs to get & set the max irqs per context
    - Add preliminary workaround for CX4 interrupt limitation
    - Add support for interrupts on the Mellanox CX4
    - Workaround PE=0 hardware limitation in Mellanox CX4
    - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n
 
 selftests:
  - Test unaligned copy and paste from Chris Smart
  - Load Monitor Register Tests from Jack Miller
  - Cyril Bur
    - exec() with suspended transaction
    - Use signed long to read perf_event_paranoid
    - Fix usage message in context_switch
    - Fix generation of vector instructions/types in context_switch
  - Michael Ellerman
    - Use "Delta" rather than "Error" in normal output
    - Import Anton's mmap & futex micro benchmarks
    - Add a test for PROT_SAO
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnWchAAoJEFHr6jzI4aWAe64P/36Vd9yJLptjkoyZp8/IQtu1
 Cv8buQwGdKuSMzdkcUAOXcC3fe2u70ZWXMKKLfY3koIV1IAiqdWk5/XWRKMP2XmE
 dG0LhSf0uu7uh+mE0WvQnRu46ImeKtQ+mPp4Hbs/s9SxMSeYjruv3vdWWmgUq0cl
 Gac2qJSRtAMmgLuHWMjf7N5mxOTOnKejU4o2i9cJ+YHmWKOdCigv2Ge1UadOQFlC
 E7tRPiUR3asfDfj+e+LVTTdToH6p8pk+mOUzIoZ8jIkQ+IXzi62UDl5+Rw9mqiuX
 1CtqEMUXxo2qwX+d4TcV/QUOp0YKPuIcUZ9NMMS+S3lOyJ4NFt+j2Izk7QJp5kNP
 gKVqB68TjDQsBuDr3P9ynlHbduxTIhZAqopbTrLe0FIg48nUe4n1yHJBVzqaVajX
 rFBJSsSUffBLAARNPSXJJhIgc2C1/qOC8dgMeDMcR2kPirDHaQZ/lY1yEpq1yiqR
 q6e3v5hvIAm4IjbYk0mF7TUxBrPGVE/ExyBINyASRoYxAJ1PyeD/iljZ9vI3asRA
 s+hhxT8H3f7lnqTrmJqMjHgAdGkmag07EdmvFNX4xK4aADSy7Y6g4dw25ffRopo9
 p9Jf9HX+dZv65Y3UjbV/6HuXcaSEBJJLSVWvii65PebqSN0LuHEFvNeIJ6Iblx0B
 AWh/hd0Iin2gdkcG39Mr
 =Z5kM
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...
2016-07-30 21:01:36 -07:00
Linus Torvalds f64d6e2aaa DeviceTree update for 4.8:
- Removal of most of_platform_populate() calls in arch code. Now the DT
 core code calls it in the default case and platforms only need to call
 it if they have special needs.
 
 - Use pr_fmt on all the DT core print statements.
 
 - CoreSight binding doc improvements to block name descriptions.
 
 - Add dt_to_config script which can parse dts files and list
 corresponding kernel config options.
 
 - Fix memory leak hit with a PowerMac DT.
 
 - Correct a bunch of STMicro compatible strings to use the correct
 vendor prefix.
 
 - Fix DA9052 PMIC binding doc to match what is actually used in dts
 files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXm9KcAAoJEPr7XbWNvGHDRT4QAIIIOSB4AWHardnMLROgGge9
 aOQKZ/05O9feOcxYKe8FkQbcH+IujJjrUL+yrRD36yGQPAyBP21gtcmmfrkCcwFM
 kH915f/JbGvXpfwEf8dcarHhzYH6FFJiQGduPpWfwSSWynx+xq5EKPwCqYzMg8bN
 SExxt7vUx1MKFOExZ0K8BNCo8VMVLUWQoJ1DNeJDuL25Op4EU3i2l1HQNYV/3XDk
 BSA3x7Lw3GjrWEH20VWYn2Azq1OFLY+E2FC2lnG4nbkk5X8dZbUH9PR1Sk7uTQDj
 uxTjWe59NBpliCxKSAbMbTAU/WwSB1pJ0I+zDJBiQsdFT+nb5F4zOrs3qSKHa/A9
 Rv6AC8k5gdSMrDB1dOspfF2vWvOOInXgNV4/Kza0D92mbCpwyUuF+vhE6rfcMrZU
 OiD7rj2/fvO7Y9fUAhrp6zrfrOfH9B1Z9vS+940AlK96YwPE2+J0SA2vBxR/wg8H
 7fj4Ud5X+SFisXWQhh5Wlv0W9o6e7C7fsi8vpkQ7gufmezLFWVnJKsUfQaxGEwhG
 Hkhm9kuSHHMd+6dEnn2756DnNfJAtQv6rSR0/QR4Lf9y5L4dvR3kAQIci8X/nx4P
 sIk+IJWGZG6wziZq59hh+SO6HEqdSNuvh+5sbR0iUimdE/1HsDBdPiocXf/r8iwK
 NY9nGeZPRrXmFgdpoZfm
 =wLMr
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...
2016-07-30 11:32:01 -07:00
Linus Torvalds 468fc7ed55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Unified UDP encapsulation offload methods for drivers, from
    Alexander Duyck.

 2) Make DSA binding more sane, from Andrew Lunn.

 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.

 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.

 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
    packets as soon as the device sees them, with the option to mirror
    the packet on TX via the same interface.  From Brenden Blanco and
    others.

 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.

 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.

 8) Simplify netlink conntrack entry layout, from Florian Westphal.

 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
    Schimmel, Yotam Gigi, and Jiri Pirko.

10) Add SKB array infrastructure and convert tun and macvtap over to it.
    From Michael S Tsirkin and Jason Wang.

11) Support qdisc packet injection in pktgen, from John Fastabend.

12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.

13) Add NV congestion control support to TCP, from Lawrence Brakmo.

14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.

15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.

16) Support MPLS over IPV4, from Simon Horman.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  xgene: Fix build warning with ACPI disabled.
  be2net: perform temperature query in adapter regardless of its interface state
  l2tp: Correctly return -EBADF from pppol2tp_getname.
  net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
  net: ipmr/ip6mr: update lastuse on entry change
  macsec: ensure rx_sa is set when validation is disabled
  tipc: dump monitor attributes
  tipc: add a function to get the bearer name
  tipc: get monitor threshold for the cluster
  tipc: make cluster size threshold for monitoring configurable
  tipc: introduce constants for tipc address validation
  net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
  MAINTAINERS: xgene: Add driver and documentation path
  Documentation: dtb: xgene: Add MDIO node
  dtb: xgene: Add MDIO node
  drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
  drivers: net: xgene: Use exported functions
  drivers: net: xgene: Enable MDIO driver
  drivers: net: xgene: Add backward compatibility
  drivers: net: phy: xgene: Add MDIO driver
  ...
2016-07-27 12:03:20 -07:00
Linus Torvalds 08fd8c1768 xen: features and fixes for 4.8-rc0
- ACPI support for guests on ARM platforms.
 - Generic steal time support for arm and x86.
 - Support cases where kernel cpu is not Xen VCPU number (e.g., if
   in-guest kexec is used).
 - Use the system workqueue instead of a custom workqueue in various
   places.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXmLlrAAoJEFxbo/MsZsTRvRQH/1wOMF8BmlbZfR7H3qwDfjst
 ApNifCiZE08xDtWBlwUaBFAQxyflQS9BBiNZDVK0sysIdXeOdpWV7V0ZjRoLL+xr
 czsaaGXDcmXxJxApoMDVuT7FeP6rEk6LVAYRoHpVjJjMZGW3BbX1vZaMW4DXl2WM
 9YNaF2Lj+rpc1f8iG31nUxwkpmcXFog6ct4tu7HiyCFT3hDkHt/a4ghuBdQItCkd
 vqBa1pTpcGtQBhSmWzlylN/PV2+NKcRd+kGiwd09/O/rNzogTMCTTWeHKAtMpPYb
 Cu6oSqJtlK5o0vtr0qyLSWEGIoyjE2gE92s0wN3iCzFY1PldqdsxUO622nIj+6o=
 =G6q3
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from David Vrabel:
 "Features and fixes for 4.8-rc0:

   - ACPI support for guests on ARM platforms.
   - Generic steal time support for arm and x86.
   - Support cases where kernel cpu is not Xen VCPU number (e.g., if
     in-guest kexec is used).
   - Use the system workqueue instead of a custom workqueue in various
     places"

* tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits)
  xen: add static initialization of steal_clock op to xen_time_ops
  xen/pvhvm: run xen_vcpu_setup() for the boot CPU
  xen/evtchn: use xen_vcpu_id mapping
  xen/events: fifo: use xen_vcpu_id mapping
  xen/events: use xen_vcpu_id mapping in events_base
  x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info
  x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op
  xen: introduce xen_vcpu_id mapping
  x86/acpi: store ACPI ids from MADT for future usage
  x86/xen: update cpuid.h from Xen-4.7
  xen/evtchn: add IOCTL_EVTCHN_RESTRICT
  xen-blkback: really don't leak mode property
  xen-blkback: constify instance of "struct attribute_group"
  xen-blkfront: prefer xenbus_scanf() over xenbus_gather()
  xen-blkback: prefer xenbus_scanf() over xenbus_gather()
  xen: support runqueue steal time on xen
  arm/xen: add support for vm_assist hypercall
  xen: update xen headers
  xen-pciback: drop superfluous variables
  xen-pciback: short-circuit read path used for merging write values
  ...
2016-07-27 11:35:37 -07:00
Linus Torvalds 9c1958fc32 media updates for v4.8-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXlfJvAAoJEAhfPr2O5OEVtLUP/RpCQ+W3YVryIdmLkdmYXoY7
 m2rXtUh7GmzBjaBkFzbRCGZtgROF7zl0e1R3nm4tLbCV4Becw8HO7YiMjqFJm9xr
 b6IngIyshsHf60Eii3RpLqUFvYrc/DDIMeYf8miwj/PvFAfI2BV9apraexJlpUuI
 wdyi28cfBHq4WYhubaXKoAyBQ8YRA/t8KNRAkDlifaOaMbSAxWHlmqoSmJWeQx73
 KHkSvbRPu4Hjo3R6q/ab8VhqmXeSnbqnQB9lgnxz7AmAZGhOlMYeAhV/K2ZwbBH8
 swv36RmJVO59Ov+vNR4p7GGGDL3+qk8JLj4LNVVfOcW0A+t7WrPQEmrL6VsyaZAy
 /+r4NEOcQN6Z5nFwbr3E0tYJ2Y5jFHOvsBfKd3EEGwty+hCl634akgb0vqtg06cg
 E2KG+XW983RBadVwEBnEudxJb0fWPWHGhXEqRrwOD+718FNmTqYM6dEvTEyxRup8
 EtCLj+eQQ4LmAyZxWyE8A+keKoMFQlHqk9LN9vQ7t7Wxq9mQ+V2l12T/lN4VhdTq
 4QZ4mrCMCGEvNcNzgSg6R/9lVb6RHDtMXZ3htbB/w+5xET/IKIANYyg1Hr7ahtdh
 rTW/4q6n3jtsu6tp5poteFvPzZKAblbrj2EptVzZYkonQ5BeAUisFTtneUL10Jmj
 EUf/sH0fqoOA0VvV6Tu+
 =mrOW
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new framework support for HDMI CEC and remote control support

 - new encoding codec driver for Mediatek SoC

 - new frontend driver: helene tuner

 - added support for NetUp almost universal devices, with supports
   DVB-C/S/S2/T/T2 and ISDB-T

 - the mn88472 frontend driver got promoted from staging

 - a new driver for RCar video input

 - some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3

 - lots of driver cleanups, improvements and fixups

* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  [media] cec: always check all_device_types and features
  [media] cec: poll should check if there is room in the tx queue
  [media] vivid: support monitor all mode
  [media] cec: fix test for unconfigured adapter in main message loop
  [media] cec: limit the size of the transmit queue
  [media] cec: zero unused msg part after msg->len
  [media] cec: don't set fh to NULL in CEC_TRANSMIT
  [media] cec: clear all status fields before transmit and always fill in sequence
  [media] cec: CEC_RECEIVE overwrote the timeout field
  [media] cxd2841er: Reading SNR for DVB-C added
  [media] cxd2841er: Reading BER and UCB for DVB-C added
  [media] cxd2841er: fix switch-case for DVB-C
  [media] cxd2841er: fix signal strength scale for ISDB-T
  [media] cxd2841er: adjust the dB scale for DVB-C
  [media] cxd2841er: provide signal strength for DVB-C
  [media] cxd2841er: fix BER report via DVBv5 stats API
  [media] mb86a20s: apply mask to val after checking for read failure
  [media] airspy: fix error logic during device register
  [media] s5p-cec/TODO: add TODO item
  [media] cec/TODO: drop comment about sphinx documentation
  ...
2016-07-26 18:59:59 -07:00
Rafael J. Wysocki d85f4eb699 Merge branch 'acpi-numa'
* acpi-numa:
  ACPI / NUMA: Enable ACPI based NUMA on ARM64
  arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT
  ACPI / processor: Add acpi_map_madt_entry()
  ACPI / NUMA: Improve SRAT error detection and add messages
  ACPI / NUMA: Move acpi_numa_memory_affinity_init() to drivers/acpi/numa.c
  ACPI / NUMA: remove unneeded acpi_numa=1
  ACPI / NUMA: move bad_srat() and srat_disabled() to drivers/acpi/numa.c
  x86 / ACPI / NUMA: cleanup acpi_numa_processor_affinity_init()
  arm64, NUMA: Cleanup NUMA disabled messages
  arm64, NUMA: rework numa_add_memblk()
  ACPI / NUMA: move acpi_numa_slit_init() to drivers/acpi/numa.c
  ACPI / NUMA: Move acpi_numa_arch_fixup() to ia64 only
  ACPI / NUMA: remove duplicate NULL check
  ACPI / NUMA: Replace ACPI_DEBUG_PRINT() with pr_debug()
  ACPI / NUMA: Use pr_fmt() instead of printk
2016-07-25 13:40:39 +02:00
Benjamin Herrenschmidt b9c13fe32f dt: Add of_device_compatible_match()
This provides an equivalent of of_fdt_match() for non-flat trees.

This is more practical than matching an array of of_device_id structs
when converting a bunch of existing users of of_fdt_match().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-20 14:29:56 +10:00
Michal Suchanek 1d1bde550e of: fdt: mark unflattened tree as detached
The tree returned from of_fdt_unflatten_tree cannot be attached to the
live tree because it is not marked as detached so mark it as such. The
dt resolver checks the flag and refuses to process the tree otherwise.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-18 17:27:04 -05:00
Michal Suchanek 5de3bbc850 of: overlay: add resolver error prints
Applying overlay fails silently in case of an error. Add error prints.
Most notably the lack of symbols in the live tree is not reported.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-18 17:18:36 -05:00
Rob Herring 606ad42aa3 of: use pr_fmt prefix for all console printing
Clean-up all the DT printk functions to use common pr_fmt prefix.

Some print statements such as kmalloc errors were redundant, so just
drop those.

Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-18 16:57:42 -05:00
Dongpo Li b786241253 of_mdio: Abstract a general interface for phy connect
Abstract a general interface "of_phy_get_and_connect"
for PHY connect. User will have no bother with getting
"phy-mode" and "phy-handle" any more.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16 21:32:58 -07:00
Mauro Carvalho Chehab fb810cb5ed Linux 4.7-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXefulAAoJEHm+PkMAQRiG6nMH/2O1vcZeOtqmx2yCMUeXyKAT
 wG88XflXzf3rM7C7TiObEYVf/bbLleJ7saDLEeic7ButD5gyYacIuzylVnrcqfBc
 vinz4cOw5kvu9DrRkCKdOfiTAgwYtqQW+syJ8ZK4lPQuSxnPAs+F/FKSOpyUF5FN
 Dngr520KjYKBEtn27W9UDPChFRwQoWAlaOC534eusaArCJtHGHHiuq5TEDn2EIo8
 pUw2vwx5JiquSHOY34WLU7r+QoilovCQlUSsBQdLlPjfMB1QFtclPYa+5yEMjkT4
 wusOUOfS/zK0rV6KnEdc/SkpiVX5C9WpFiWUOdEeJ5mZ+KijVkaOa9K1EDx8jSM=
 =7Hwh
 -----END PGP SIGNATURE-----

Merge tag 'v4.7-rc6' into patchwork

Linux 4.7-rc6

* tag 'v4.7-rc6': (1245 commits)
  Linux 4.7-rc6
  ovl: warn instead of error if d_type is not supported
  MIPS: Fix possible corruption of cache mode by mprotect.
  locks: use file_inode()
  usb: dwc3: st: Use explicit reset_control_get_exclusive() API
  phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
  phy: miphy28lp: Inform the reset framework that our reset line may be shared
  namespace: update event counter when umounting a deleted dentry
  9p: use file_dentry()
  lockd: unregister notifier blocks if the service fails to come up completely
  ACPI,PCI,IRQ: correct operator precedence
  fuse: serialize dirops by default
  drm/i915: Fix missing unlock on error in i915_ppgtt_info()
  powerpc: Initialise pci_io_base as early as possible
  mfd: da9053: Fix compiler warning message for uninitialised variable
  mfd: max77620: Fix FPS switch statements
  phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared
  usb: dwc3: st: Inform the reset framework that our reset line may be shared
  usb: host: ehci-st: Inform the reset framework that our reset line may be shared
  usb: host: ohci-st: Inform the reset framework that our reset line may be shared
  ...
2016-07-08 18:14:03 -03:00