Commit Graph

861 Commits

Author SHA1 Message Date
Linus Torvalds ae045e2455 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...
2014-08-06 09:38:14 -07:00
Linus Torvalds e7fda6c4c3 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and time updates from Thomas Gleixner:
 "A rather large update of timers, timekeeping & co

   - Core timekeeping code is year-2038 safe now for 32bit machines.
     Now we just need to fix all in kernel users and the gazillion of
     user space interfaces which rely on timespec/timeval :)

   - Better cache layout for the timekeeping internal data structures.

   - Proper nanosecond based interfaces for in kernel users.

   - Tree wide cleanup of code which wants nanoseconds but does hoops
     and loops to convert back and forth from timespecs.  Some of it
     definitely belongs into the ugly code museum.

   - Consolidation of the timekeeping interface zoo.

   - A fast NMI safe accessor to clock monotonic for tracing.  This is a
     long standing request to support correlated user/kernel space
     traces.  With proper NTP frequency correction it's also suitable
     for correlation of traces accross separate machines.

   - Checkpoint/restart support for timerfd.

   - A few NOHZ[_FULL] improvements in the [hr]timer code.

   - Code move from kernel to kernel/time of all time* related code.

   - New clocksource/event drivers from the ARM universe.  I'm really
     impressed that despite an architected timer in the newer chips SoC
     manufacturers insist on inventing new and differently broken SoC
     specific timers.

[ Ed. "Impressed"? I don't think that word means what you think it means ]

   - Another round of code move from arch to drivers.  Looks like most
     of the legacy mess in ARM regarding timers is sorted out except for
     a few obnoxious strongholds.

   - The usual updates and fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  timekeeping: Fixup typo in update_vsyscall_old definition
  clocksource: document some basic timekeeping concepts
  timekeeping: Use cached ntp_tick_length when accumulating error
  timekeeping: Rework frequency adjustments to work better w/ nohz
  timekeeping: Minor fixup for timespec64->timespec assignment
  ftrace: Provide trace clocks monotonic
  timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
  seqcount: Add raw_write_seqcount_latch()
  seqcount: Provide raw_read_seqcount()
  timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
  timekeeping: Create struct tk_read_base and use it in struct timekeeper
  timekeeping: Restructure the timekeeper some more
  clocksource: Get rid of cycle_last
  clocksource: Move cycle_last validation to core code
  clocksource: Make delta calculation a function
  wireless: ath9k: Get rid of timespec conversions
  drm: vmwgfx: Use nsec based interfaces
  drm: i915: Use nsec based interfaces
  timekeeping: Provide ktime_get_raw()
  hangcheck-timer: Use ktime_get_ns()
  ...
2014-08-05 17:46:42 -07:00
David S. Miller f139c74a8d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30 13:25:49 -07:00
Linus Torvalds 2bdb5eb79b IEEE 1394 (FireWire) subsystem fix: MSI don't work on VIA PCIe controllers
with some isochronous workloads (regression since v3.16-rc1).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT02gRAAoJEHnzb7JUXXnQJDcQAOQ7w0+/QNR9xQUuj4Kmn8Kw
 paUJ0ccGa5LdfTZIThbVPdn3R5mdKgCYVookRbSktmAXo8C7IzLsGk8hw35SdA7g
 Ap638MKIfY1+tNajG4fRZGptIRf04SzJpH3qYtApZQIaXZ3NWS9zHhobyOX/wFIf
 HyiorPp6PEy1BBGdnMavS71v3L04oQ84eg2bUyWvi2sKT1RHO1pcHTl25FgXARsX
 k1a35waw2fiP7USlYWdq+dNFnKxirlij9P1Ma72stLY16/NoxDiLRHs+hQTWBfM2
 BsHtx739THyTYA0rpsO7U7YypsxM+SihnwJAC0ZRk760FsCrWBvOIcjHuqP3Wh1j
 vzydxLYTpOCtdrRJ1epZpC96BSBgq2+N8vf4dNC/MOxX4/O8im80jGf5QpMuARxu
 MqLkTfIeFPirvXv2PNtWvomeAzDTvyaH/OYxh6G8389yIRD9hs9kxc0bjyfXbPlh
 I/Yl7XhhQq3Gbq09th3rMy6LZUW9IW50w9HHDeGVJWwsltMV0cR2Wm9R4nWcRmtB
 TxGuGAxiwFI13eEcJvtHf/CB2JvR24t51kmje/0s+ag4KOw7ByDGZH60K3y14tb0
 9vVisqfputElv0rz7heW+gYFi9+3Jo0NGGRDTUoJ4wTTJvCUyoUsiXTXl3ryc+ux
 tayMjniMBsPKLA/iKbuX
 =xNu7
 -----END PGP SIGNATURE-----

Merge tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire regression fix from Stefan Richter:
 "IEEE 1394 (FireWire) subsystem fix: MSI don't work on VIA PCIe
  controllers with some isochronous workloads (regression since
  v3.16-rc1)"

* tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: disable MSI for VIA VT6315 again
2014-07-27 09:42:06 -07:00
Stefan Richter d584a66279 firewire: ohci: disable MSI for VIA VT6315 again
Revert half of commit d151f9854f21:  If isochronous I/O is attempted with
packets larget than 1 kByte, VIA VT6315 rev 01 immediately stops to generate
any interrupts if MSI are used.  Fix this by going back to legacy interrupts.
[Thread "Isochronous streaming with VT6315 OHCI",
http://marc.info/?t=139049641500003]

With smaller packets, the loss of IRQs happens too but only very rarely ---
rarely eneough that it was not yet possible for me to determine whether
QUIRK_NO_MSI is an actual fix for this rare variation of this chip bug.

I am keeping QUIRK_CYCLE_TIMER off of VT6315 rev >= 1 because this has been
verified by myself with certainty.  On the other hand, I am also keeping
QUIRK_CYCLE_TIMER on for VT6315 rev 0 because I don't know at this time
whether this revision accesses Cycle Timer non-atomically like most of the
other VIA OHCIs are known to do.

Reported-by: Rémy Bruno <remy-fw@remy.trinnov.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-07-23 20:11:19 +02:00
David S. Miller 1a98c69af1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 14:09:34 -07:00
Tom Gundersen c835a67733 net: set name_assign_type in alloc_netdev()
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit

Signed-off-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:12:48 -07:00
Linus Torvalds 1b81e88189 IEEE 1394 (FireWire) subsystem fix: The 1394 drivers cannot and are not supposed
to be built on platforms which don't provide the DMA mapping API.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTxCGPAAoJEHnzb7JUXXnQ0W8QAKTGboWwSU5kznTcWGveIgEl
 fckaDnyinK9Vd6lOpixxsSc0rxdaKPmMmoC1ta2AGcD4NgRyfM2aD3Lw6dArzlHr
 xgcDRPE4K/41atxf6Z/wZnsXFSLrNEJbr6e8oZncGDzcRp4DKzv7tX2meNzyQRFE
 ns0/sjeN7QJEamd8vUkELiVdBED7NLiQjxXdULQ9AjY/cC3byzWAHzyoII0ff5NY
 +URYGtTIxwJ2KoNAtqD9OAazwPUV8rt1XXWnqkUHS89TnACsKiWmHpaBq+6jTkqG
 YsRxY9h0eZ+sSHoeEBUS2WLiaKWufvsBWBTCOUVoO0eS2iYHJQ1SwSLYU1+Zh0IR
 Fey2N2YaMA1HNthJ0OJJdC+sqSZ/tBmE+ytN7rTVHu0Yw0ZffzSPgJ303jIO0y87
 rYQ57K6dXhn5kDqh/PheDJCZ1OwMqz+zvgJDyv9XaEcm9lynDmmhc2IqmzlqONmz
 0UbiHITiqMrv6bSzZ83+PVeoROw2DBgH/fEu/Xk2vC1hBA7s4NynGSllEht1tXT3
 zLbVW/bBbZfjqc0a1UADBRHVKSllac+BPlxvGHSUxJusqC2VN9S9tgEhboj7+baY
 7VHbGkuCaEqtZeErzfNTN9uGvUsBN0KGDatW4Kp0g2CZ33dFDpJFOt7O5QaephnF
 DhlO4daXNsvHvFVgpBGZ
 =vY8J
 -----END PGP SIGNATURE-----

Merge tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Stefan Richter:
 "The 1394 drivers cannot and are not supposed to be built on platforms
  which don't provide the DMA mapping API (regression since v3.16-rc1
  with CONFIG_COMPILE_TEST=y on some architectures)"

* tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: IEEE 1394 (FireWire) support should depend on HAS_DMA
2014-07-14 17:17:53 -07:00
Geert Uytterhoeven 655fc39bf4 firewire: IEEE 1394 (FireWire) support should depend on HAS_DMA
Commit b3d681a4fc ("firewire: Use
COMPILE_TEST for build testing") added COMPILE_TEST as an alternative
dependency for the purpose of build testing the firewire core.
However, this bypasses all other implicit dependencies assumed by PCI,
like HAS_DMA.

If NO_DMA=y:

    drivers/built-in.o: In function `fw_iso_buffer_destroy':
    (.text+0x36a096): undefined reference to `dma_unmap_page'
    drivers/built-in.o: In function `fw_iso_buffer_map_dma':
    (.text+0x36a164): undefined reference to `dma_map_page'
    drivers/built-in.o: In function `fw_iso_buffer_map_dma':
    (.text+0x36a172): undefined reference to `dma_mapping_error'
    drivers/built-in.o: In function `sbp2_send_management_orb':
    sbp2.c:(.text+0x36c6b4): undefined reference to `dma_map_single'
    sbp2.c:(.text+0x36c6c8): undefined reference to `dma_mapping_error'
    sbp2.c:(.text+0x36c772): undefined reference to `dma_map_single'
    sbp2.c:(.text+0x36c786): undefined reference to `dma_mapping_error'
    sbp2.c:(.text+0x36c854): undefined reference to `dma_unmap_single'
    sbp2.c:(.text+0x36c872): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `sbp2_map_scatterlist':
    sbp2.c:(.text+0x36ccbc): undefined reference to `scsi_dma_map'
    sbp2.c:(.text+0x36cd36): undefined reference to `dma_map_single'
    sbp2.c:(.text+0x36cd4e): undefined reference to `dma_mapping_error'
    sbp2.c:(.text+0x36cd84): undefined reference to `scsi_dma_unmap'
    drivers/built-in.o: In function `sbp2_unmap_scatterlist':
    sbp2.c:(.text+0x36cda6): undefined reference to `scsi_dma_unmap'
    sbp2.c:(.text+0x36cdc6): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `complete_command_orb':
    sbp2.c:(.text+0x36d6ac): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `sbp2_scsi_queuecommand':
    sbp2.c:(.text+0x36d8e0): undefined reference to `dma_map_single'
    sbp2.c:(.text+0x36d8f6): undefined reference to `dma_mapping_error'

Add an explicit dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-07-13 20:53:25 +02:00
Thomas Gleixner 889235ce2b firewire: Use ktime_get_ts()
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Link: http://lkml.kernel.org/r/20140611234607.351283464@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-12 16:18:45 +02:00
Linus Torvalds b77279bc2e sound updates for 3.16-rc1
At this time, majority of changes come from ASoC world while we got a
 few new drivers in other places for FireWire and USB.  There have been
 lots of ASoC core cleanups / refactoring, but very little visible to
 external users.
 
 ASoC
 - Support for specifying aux CODECs in DT
 - Removal of the deprecated mux and enum macros
 - More moves towards full componentisation
 - Removal of some unused I/O code
 - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
   Haswell and Realtek drivers
 - Several drivers exposed directly in Kconfig for use with simple-card
 - GPIO descriptor support for jacks
 - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
 - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
   ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781,
   and Realtek RT5677
 
 HD-audio:
 - Clean up Dell headset quirks
 - Noise fixes for Dell and Sony laptops
 - Thinkpad T440 dock fix
 - Realtek codec updates (ALC293,ALC233,ALC3235)
 - Tegra HD-audio HDMI support
 
 FireWire-audio:
 - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming
   isochronous stream and duplex streams with timestamp synchronization
 - BeBoB-based devices support
 - Fireworks-based device support
 
 USB-audio:
 - Behringer BCD2000 USB device support
 
 Misc:
 - Clean up of a few old drivers, atmel, fm801, etc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjzW4AAoJEGwxgFQ9KSmkUrMP/1z43Kp+F9Y0v0VBH6oR/d4N
 l9IyxBno/ABxfWloGFnRLEyzZyj2yG8A7inT0alVXJifHJN4iPOKBb5dPE9LMRvc
 qLhJjMwznAirkuE8Wsk+IAoKuyXEI4m+KKEIXt5WJ3UyAo/j1lySZVMChzcTFFk/
 oc2C6CciYrQLziaaL/K5zD9v9XdDr9koOaSHK/xjUOCbDlEBJu6T2IvRI/tkqJmy
 8oRRhRteXZ9D959+ftntKrFVf10APQ4ZQbsX/pHboduaoozYAJSJGFhQNbh/UZnb
 zwwwanNZvLwzn+rRXJJuzHF4jra34CuQFL2awsDP9Wck9E3YLmt4audNQ6LM6J8z
 IVZs5IjMIL1ey1T2oRczLnv7EoDp0xdP38GqXnQ88j3zd+Ifi77idNw1ssU1aZ5B
 LzEFEytT1UbEUkqom9qtIG+GId9hSmVmHQuLsc6Ayg7md0oBeJnBC05Xt5FATdrp
 HseHYfSrNNDBFKyj8+j0TVtHc9Xf4SKziSVWz/PT0gaROzOsR2e46HC2Hvut+OFZ
 rLLPXn9up5viQFxOTbO7sdYGCYa/iVH7IwB2oCP6Z5/I8+fhsU7aA4Hl+0wBikin
 PDSwuchmRlNpHJ18YDonjzFtWA51wG4IlcNbQY4ywO/jFae06KYxQPTwvmJI0+oV
 GXyKtjdBnQg8nnWJlS8J
 =nxFA
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next

Pull sound updates from Takashi Iwai:
 "At this time, majority of changes come from ASoC world while we got a
  few new drivers in other places for FireWire and USB.  There have been
  lots of ASoC core cleanups / refactoring, but very little visible to
  external users.

  ASoC:
   - Support for specifying aux CODECs in DT
   - Removal of the deprecated mux and enum macros
   - More moves towards full componentisation
   - Removal of some unused I/O code
   - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
     Haswell and Realtek drivers
   - Several drivers exposed directly in Kconfig for use with
     simple-card
   - GPIO descriptor support for jacks
   - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
   - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651
     and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and
     ADAU1781, and Realtek RT5677

  HD-audio:
   - Clean up Dell headset quirks
   - Noise fixes for Dell and Sony laptops
   - Thinkpad T440 dock fix
   - Realtek codec updates (ALC293,ALC233,ALC3235)
   - Tegra HD-audio HDMI support

  FireWire-audio:
   - FireWire audio stack enhancement (AMDTP, MIDI), support for
     incoming isochronous stream and duplex streams with timestamp
     synchronization
   - BeBoB-based devices support
   - Fireworks-based device support

  USB-audio:
   - Behringer BCD2000 USB device support

  Misc:
   - Clean up of a few old drivers, atmel, fm801, etc"

* tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits)
  ASoC: Fix wrong argument for card remove callbacks
  ASoC: free jack GPIOs before the sound card is freed
  ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation
  ASoC: cache: Fix error code when not using ASoC level cache
  ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
  ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
  ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
  ASoC: add RT5677 CODEC driver
  ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
  ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support
  ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support
  ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
  ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  ASoC: Add helper functions to cast from DAPM context to CODEC/platform
  ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
  ASoC: wm9713: correct mono out PGA sources
  ALSA: synth: emux: soundfont.c: Cleaning up memory leak
  ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320
  ASoC: fsl-ssi: Use regmap
  ASoC: fsl-ssi: reorder and document fsl_ssi_private
  ...
2014-06-04 09:08:25 -07:00
Linus Torvalds 1b3636093d IEEE 1394 (FireWire) subsystem changes:
One optimization for some VIA controllers, one fix, one kconfig brushup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjjgrAAoJEHnzb7JUXXnQK7wP/0SaXBk/sWSaxn0JM50xRv2e
 90rt2V2QFrlEuk/kNOJHJIgMdIhl+z14caCMxNhXnlHVD6gPnLUAXPCLrf1Kth0R
 kcpQ+nILuigMWm8GnyA1o/pr62J/gyF47xvceHqadkPEsESRT3allWe5kCtRLasT
 FRBd/tAhcdtZlsbjZS8qsCbZeg6T38P2w3kHlvx7gTt87UTD1NkqJOwKhxcTAd3C
 YK+T6XG9RsHJDv6mfQNp29RTQbkrkUewjoD62sqoDQkb1VgGnNanr1YlBvtwrrvl
 MYAR6tsaH2fV9fb3ztM6iERuG3zLBsB6t5IImGL5R7AnAxQx4rDby0qmUVismrMA
 AkDI1XDBoyhAcfF+1qPlCAvQOmbIoVo3BH428WREf33Nq4RV4lkTwKb+jq+RKOJ4
 2Z5DdRrbiaimwChkbznk93tLAF4FiqzX8NI5BQnGHWB7ZD1LsteJRgcDRYu90Fxr
 dR16y4mnbWTwPcxZprQcDMF5NH8KhAGkL7A1K0nbz5ZblDtBkbqwRdwZ6xhs/RSc
 NBcnR+eMXp3KRLqN7qnD8lIon8EezW0tn46EBTkI+iGWd+mLR4FMu6spF2gcwOjM
 tXF+YotZ08H5NHCVSKe2GudDedPjf/gPKJ6z2+bXrwtaXvtfLS8cNYK7jpTBfrq5
 zR/2fhPPf4iCy5vuSwQY
 =27Wn
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 into next

Pull firewire updates from Stefan Richter:
 "IEEE 1394 (FireWire) subsystem changes: One optimization for some VIA
  controllers, one fix, one kconfig brushup"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk
  firewire: Use COMPILE_TEST for build testing
  firewire: net: fix NULL derefencing in fwnet_probe()
2014-06-04 07:47:03 -07:00
Linus Torvalds 776edb5931 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...
2014-06-03 12:57:53 -07:00
Stefan Richter d151f9854f firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk
Commit af0cdf4947 "firewire: ohci: fix regression with VIA VT6315,
disable MSI" acted upon a report against VT6315 rev 0:
http://linux.derkeiler.com/Mailing-Lists/Kernel/2010-12/msg02301.html
$ lspci -nn
VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403]

I now got a card with
$ lspci -nn
VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01)
and this works fine with MSI enabled.

Second, I tested this VT6315 rev 1 without CYCLE_TIMER quirk flag using
http://me.in-berlin.de/~s5r6/linux1394/utils/test_cycle_time_v20100125.c
and found that this chip does in fact access the cycle timer atomically.

Things I can't test because I don't have the hardware:
  - whether VT6315 rev 0 really needs QUIRK_CYCLE_TIMER,
  - whether the VT6320 PCI device needs QUIRK_CYCLE_TIMER,
  - whether the VT6325 and VT6330 PCIe devices need QUIRK_CYCLE_TIMER
    and QUIRK_NO_MSI.

Hence, just add a whitelist entry specifically for VT6315 rev >= 1
without any quirk flags.  Before this entry we need an extra entry to
catch VT6315 rev <= 0 due to how our ID matching logic works.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-29 19:02:22 +02:00
Stefan Richter 2fe2023adf firewire: revert to 4 GB RDMA, fix protocols using Memory Space
Undo a feature introduced in v3.14 by commit fcd46b3442
"firewire: Enable remote DMA above 4 GB".  That change raised the
minimum address at which protocol drivers and user programs can register
for request reception from 0x0001'0000'0000 to 0x8000'0000'0000.
It turned out that at least one vendor-specific protocol exists which
uses lower addresses:  https://bugzilla.kernel.org/show_bug.cgi?id=76921

For the time being, revert most of commit fcd46b3442 so that affected
protocols work like with kernel v3.13 and before.  Just keep the valid
documentation parts from the regressing commit, and the ability to
identify controllers which could be programmed to accept >32 bit
physical DMA addresses.  The rest of fcd46b3442 should probably be
brought back as an optional instead of default feature.

Reported-by: Fabien Spindler <fabien.spindler@inria.fr>
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-29 15:50:30 +02:00
Takashi Sakamoto 9b1ee0b2cb ALSA: firewire/bebob: Add a workaround for M-Audio special Firewire series
In post commit, a quirk of this firmware about transactions is reported.
This commit apply a workaround for this quirk.

They often fail transactions due to gap_count mismatch. This state is changed
by generating bus reset.

The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there
are no header for public. This commit moves its prototype from
drivers/firewire/core.h to include/linux/firewire.h.

This mismatch still affects bus management before generating this bus reset.
It still takes a time to call driver's probe() because transactions are still
often failed.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:33:10 +02:00
Jean Delvare b3d681a4fc firewire: Use COMPILE_TEST for build testing
Stop using BROKEN as an alternative dependency for the purpose of
build testing the firewire core. The newly introduced COMPILE_TEST is
better suited for that purpose.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-17 15:59:08 +02:00
Daeseok Youn 1118f8d048 firewire: net: fix NULL derefencing in fwnet_probe()
"dev" and "net" are NULL when alloc_netdev() is failed.
So just unlock and return an error.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-12 14:35:31 +02:00
Peter Zijlstra 4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Linus Torvalds 9f93585fdf Merge branch 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "This pull request contains a workqueue usage fix for firewire.

  For quite a long time now, workqueue only treats two work items
  identical iff both their addresses and callbacks match.  This is to
  avoid introducing false dependency through the work item being
  recycled while being executed.  This changes non-reentrancy guarantee
  for the users of PREPARE[_DELAYED]_WORK() - if the function changes,
  reentrancy isn't guaranteed against the previous instance.  Firewire
  depended on such nonreentrancy guarantee.

  This is fixed by doing the work item multiplexing from firewire proper
  while keeping the work function unchanged"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  firewire: don't use PREPARE_DELAYED_WORK
2014-03-08 11:51:13 -08:00
Tejun Heo 70044d71d3 firewire: don't use PREPARE_DELAYED_WORK
PREPARE_[DELAYED_]WORK() are being phased out.  They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.

firewire core-device and sbp2 have been been multiplexing work items
with multiple work functions.  Introduce fw_device_workfn() and
sbp2_lu_workfn() which invoke fw_device->workfn and
sbp2_logical_unit->workfn respectively and always use the two
functions as the work functions and update the users to set the
->workfn fields instead of overriding work functions using
PREPARE_DELAYED_WORK().

This fixes a variety of possible regressions since a2c1c57be8
"workqueue: consider work function when searching for busy work items"
due to which fw_workqueue lost its required non-reentrancy property.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel@lists.sourceforge.net
Cc: stable@vger.kernel.org # v3.9+
Cc: stable@vger.kernel.org # v3.8.2+
Cc: stable@vger.kernel.org # v3.4.60+
Cc: stable@vger.kernel.org # v3.2.40+
2014-03-07 10:19:57 -05:00
Stefan Richter 0ca49345b6 firewire: ohci: fix probe failure with Agere/LSI controllers
Since commit bd972688eb
"firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8",
there is a high chance that firewire-ohci fails to initialize LSI née
Agere controllers.
https://bugzilla.kernel.org/show_bug.cgi?id=65151

Peter Hurley points out the reason:  IEEE 1394a:2000 clause 5A.1 (or
IEEE 1394:2008 clause 17.2.1) say:  "The PHY shall insure that no more
than 10 ms elapse from the reassertion of LPS until the interface is
reset.  The link shall not assert LReq until the reset is complete."
In other words, the link needs to give the PHY at least 10 ms to get
the interface operational.

With just the msleep(1) in bd972688eb, the first read_phy_reg()
during ohci_enable() may happen before the phy-link interface reset was
finished, and fail.  Due to the high variability of msleep(n) with small
n, this failure was not fully reproducible, and not apparent at all with
low CONFIG_HZ setting.

On the other hand, Peter can no longer reproduce the issue with FW643
rev8.  The read phy reg failures that happened back then may have had an
unrelated cause.  So, just revert bd972688eb, except for the valid
comment on TSB82AA2 cards.

Reported-by: Mikhail Gavrilov
Reported-by: Jay Fenlason <fenlason@redhat.com>
Reported-by: Clemens Ladisch <clemens@ladisch.de>
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-03-06 21:36:23 +01:00
Stefan Richter 8987583366 firewire: net: fix use after free
Commit 8408dc1c14 "firewire: net: use dev_printk API" introduced a
use-after-free in a failure path.  fwnet_transmit_packet_failed(ptask)
may free ptask, then the dev_err() call dereferenced it.  The fix is
straightforward; simply reorder the two calls.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-02-28 11:02:51 +01:00
Stefan Richter fcd46b3442 firewire: Enable remote DMA above 4 GB
This makes all of a machine's memory accessible to remote debugging via
FireWire, using the physical response unit (i.e. RDMA) of OHCI-1394 link
layer controllers.

This requires actual support by the controller.  The only ones currently
known to support it are Agere/LSI FW643.  Most if not all other OHCI-1394
controllers do not implement the optional Physical Upper Bound register.
With them, RDMA will continue to be limited to the lowermost 4 GB.

firewire-ohci's startup message in the kernel log is augmented to tell
whether the controller does expose more than 4 GB to RDMA.

While OHCI-1394 allows for a maximum Physical Upper Bound of
0xffff'0000'0000 (near 256 TB), this implementation sets it to
0x8000'0000'0000 (128 TB) in order to avoid interference with applications
that require interrupt-served asynchronous request reception at
respectively low addresses.

Note, this change does not switch remote DMA on.  It only increases the
range of remote access to all memory (instead of just 4 GB) whenever
remote DMA was switched on by other means.  The latter is achieved by
setting firewire-ohci's remote_dma parameter, or if the physical DMA
filter is opened through firewire-sbp2.

Derived from patch "firewire: Enable physical DMA above 4GB" by
Peter Hurley <peter@hurleysoftware.com> from March 27, 2013.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-01-20 01:11:13 +01:00
Lubomir Rintel 8bc588e0e5 firewire: ohci: Turn remote DMA support into a module parameter
This makes it possible to debug kernel over FireWire without the need to
recompile it.

[Stefan R: changed description from "...0" to "...N"]

Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-01-12 18:54:38 +01:00
Stefan Richter ce027ed98f firewire: sbp2: bring back WRITE SAME support
Commit 54b2b50c20 "[SCSI] Disable WRITE SAME for RAID and virtual
host adapter drivers" disabled WRITE SAME support for all SBP-2 attached
targets.  But as described in the changelog of commit b0ea5f19d3
"firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODES",
it is not required to blacklist WRITE SAME.

Bring the feature back by reverting the sbp2.c hunk of commit 54b2b50c20.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: stable@kernel.org
2013-12-15 16:32:32 +01:00
Martin K. Petersen 54b2b50c20 [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
Some host adapters do not pass commands through to the target disk
directly. Instead they provide an emulated target which may or may not
accurately report its capabilities. In some cases the physical device
characteristics are reported even when the host adapter is processing
commands on the device's behalf. This can lead to adapter firmware hangs
or excessive I/O errors.

This patch disables WRITE SAME for devices connected to host adapters
that provide an emulated target. Driver writers can disable WRITE SAME
by setting the no_write_same flag in the host adapter template.

[jejb: fix up rejections due to eh_deadline patch]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-29 08:48:39 +04:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Stephan Gatzka db9ae8fec7 firewire: ohci: Fix deadlock at bus reset
Put bus_reset_work into its own workqueue.  By doing this, forward
progress of bus_reset_work() is guaranteed if the work is switched over
to a rescuer thread.

Switching work to a rescuer thread happens if a new worker thread could
not be allocated in certain time (MAYDAY_INITIAL_TIMEOUT, typically 10
ms).  This might not be possible under high memory pressure or even on a
heavily loaded embedded system running a slow serial console.

The former deadlock occured in the following situation:
The rescuer thread ran
fw_device_init->read_config_rom->read_rom->fw_run_transaction.
fw_run_transaction blocked waiting for the completion object.
This completion object would have been completed in bus_reset_work,
but this work was never executed in the rescuer thread due to its
strictly sequential behaviour.

[Stefan R.:  Removed WQ_NON_REENTRANT flag from allocation because
it is no longer needed in current kernels.  Add it back if you backport
to kernels older than 3.7, i.e. one which does not contain dbf2576e37
"workqueue: make all workqueues non-reentrant".  Swapped order of
destroy_workqueue and pci_unregister_driver.]

Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-29 22:35:05 +02:00
Stephan Gatzka 7a723c6ed9 firewire: ohci: Change module_pci_driver to module_init/module_exit
This is a prerequisite to allocate a per driver self_id workqueue.
This reverts the ohci.c part of patch
fe2af11c22.

Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-29 22:30:54 +02:00
Stefan Richter 0dbe15f88b firewire: ohci: beautify some macro definitions
a) Sort device IDs by vendor -- device -- revision.

b) Write quirk flags in hexadecimal.  This affects the user-visible
output of "modinfo firewire-ohci".  Since more flags have been added
recently, it is now easier to cope with them in hexadecimal represen-
tation.  Besides, the device-specific combination of quirk flags is
shown in hexadecimal in the kernel log too.  (And firewire-sbp2
presents its own quirk flags in modinfo as hexadecimals as well.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-19 09:02:05 +02:00
Stefan Richter af53122a2a firewire: ohci: change confusing name of a struct member
We have got

	struct descriptor *descriptors;
	dma_addr_t         descriptors_bus;

	dma_addr_t         buffer_bus;
	struct descriptor buffer[0];

	void      *misc_buffer;
	dma_addr_t misc_buffer_bus;

	__be32    *config_rom;
	dma_addr_t config_rom_bus;
	__be32    *next_config_rom;
	dma_addr_t next_config_rom_bus;

But then we have got

	__le32    *self_id_cpu;
	dma_addr_t self_id_bus;

Better apply the pattern of xyz vs. xyz_bus to self_id vs. self_id_bus
as well.  The _cpu suffix looks particularly weird in conversions from
little endian to CPU endian.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-19 09:02:05 +02:00
Stefan Richter 0a41981803 firewire: core: typecast from gfp_t to bool more safely
An idr related patch introduced the following sparse warning:
  drivers/firewire/core-cdev.c:488:33: warning: incorrect type in initializer (different base types)
  drivers/firewire/core-cdev.c:488:33:    expected bool [unsigned] [usertype] preload
  drivers/firewire/core-cdev.c:488:33:    got restricted gfp_t
So let's convert from gfp_t bitfield to Boolean explicitly and safely.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-07-30 15:46:18 +02:00
Tejun Heo 4e6b9319bc firewire: WQ_NON_REENTRANT is meaningless and going away
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away.  Remove its usages.

This patch doesn't introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-07-30 15:46:18 +02:00
Clemens Ladisch 0699a73af3 firewire: fix libdc1394/FlyCap2 iso event regression
Commit 18d627113b (firewire: prevent dropping of completed iso packet
header data) was intended to be an obvious bug fix, but libdc1394 and
FlyCap2 depend on the old behaviour by ignoring all returned information
and thus not noticing that not all packets have been received yet.  The
result was that the video frame buffers would be saved before they
contained the correct data.

Reintroduce the old behaviour for old clients.

Tested-by: Stepan Salenikovich <stepan.salenikovich@gmail.com>
Tested-by: Josep Bosch <jep250@gmail.com>
Cc: <stable@vger.kernel.org> # 3.4+
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-07-27 20:24:36 +02:00
Stefan Richter bcabcfd2e0 firewire: remove support of fw_driver.driver.probe and .remove methods
After all IEEE 1394 high-level drivers being converted to bus-specific
.probe/.remove methods, remove support of the obsolete generic methods.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-06-09 18:15:00 +02:00
Stefan Richter 94a87157cd firewire: introduce fw_driver.probe and .remove methods
FireWire upper layer drivers are converted from generic
    struct driver.probe() and .remove()
to bus-specific
    struct fw_driver.probe() and .remove().

The new .probe() adds a const struct ieee1394_device_id *id argument,
indicating the entry in the driver's device identifiers table which
matched the fw_unit to be probed.  This new argument is used by the
snd-firewire-speakers driver to look up device-specific parameters and
methods.  There is at least one other FireWire audio driver currently in
development in which this will be useful too.

The new .remove() drops the unused error return code.

Although all in-tree drivers are being converted to the new methods,
support for the old methods is left in place in this commit.  This
allows public developer trees to merge this commit and then move to the
new fw_driver methods.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/)
Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
2013-06-09 18:15:00 +02:00
Linus Torvalds f78089e87e IEEE 1394 (FireWire) subsystem changes:
- fix controller removal when controller is in suspended state
   - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l
   - fix a startup issue with Agere/LSI FW643-e2
   - error logging improvements and other small updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRi5gtAAoJEHnzb7JUXXnQKnAP/0TzrfuDeUY5pyIUt4Ce9emt
 8DGlMNRGSg6+VztSWQN23Heo9pvr3oWfQMtBcBsh6Jhj3ovXwXmpbhbledJxevJT
 iVofTMc/pTRlAGaNv+cEszFkOrnH9nqqDYs9sK8hibgNu7tNbivmzyG+tF7OsIIp
 aAjsFpTelKqgwo7LqTOLNvQoYx1HRTyQnp1OBa2gc76pXR1GLLuSjNlvh8b7ops5
 FCt7gmfpEzJ6U/+AWTU/QBdXdXNRzle9rwZil3d1y80qfej7+V+lGRKzuVDaZHRY
 C0t09SoYRop0m+UpnC3iXs5w0h09F4KKvRMfZ4m3sBmcRKYQeGkdKn2RRZn35hb9
 D1Oa6NhXbYw4vzvQPRWzvDqrwyOXNce/wCysQXbkBnaB05ojYzchU5KGSnoQUiBD
 G/TTLgmpiO4YPNxQgazeWesW+Y0gzd1alJvn6LPxRXTeRJLGZapYQxFZkJMkI2KU
 0hjBblF2xxLnGjy0SpxOGQNiSo2Gg6vyRkqlSXu9kKpk6h7aAGPn0eIVxjaI/aJ9
 qkqq7Qi2uPhn3y6SIO23/3tIULl+ws3+i9UzQEUtXlgFgowzOljbnkKnabjqIfl3
 OjkD3mEn0njz6mXQGsCV7MTPlUvST9ysvPi5PbkevBeLCBx8F9fiuNGdGFBqCIUb
 kHl3zh9YbyS4QtWRnpWb
 =f8Yl
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewure updates from Stefan Richter:
  - fix controller removal when controller is in suspended state
  - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l
  - fix a startup issue with Agere/LSI FW643-e2
  - error logging improvements and other small updates

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: dump_stack() for PHY regs read/write failures
  firewire: ohci: Improve bus reset error messages
  firewire: ohci: Alias dev_* log functions
  firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8
  firewire: ohci: fix VIA VT6306 video reception
  firewire: ohci: Check LPS before register access on pci removal
  firewire: ohci: Fix double free_irq()
  firewire: remove unnecessary alloc/OOM messages
  firewire: sbp2: replace BUG_ON by WARN_ON
  firewire: core: remove an always false test
  firewire: Remove two unneeded checks for macros
2013-05-09 10:11:48 -07:00
Peter Hurley 6fe9efb9c9 firewire: ohci: dump_stack() for PHY regs read/write failures
A stack trace is an invaluable tool in determining the basis
and cause of PHY regs read/write failures.

Include PHY reg addr (and value for writes) in the diagnostic.

[Stefan R:  changed whitespace]

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30 20:30:16 +02:00
Peter Hurley 67672134aa firewire: ohci: Improve bus reset error messages
Many of the error messages possible from bus_reset_work() do not
contain enough information to distinguish which error condition
occurred nor enough information to evaluate the error afterwards.

Differentiate all error conditions in bus_reset_work(); add
additional information to make error diagnosis possible.

[Stefan R:  fixed self-ID endian conversion]

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30 20:30:16 +02:00
Peter Hurley de97cb64a9 firewire: ohci: Alias dev_* log functions
Convert dev_xxxx(ohci->card.device, ...) log functions to
ohci_xxxx(ohci, ...).

[Stefan R:  Peter argues that this increases readability of the code.]
[Stefan R:  changed whitespace]

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30 20:30:16 +02:00
Peter Hurley bd972688eb firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8
With the LSI FW643 rev 8 [1], the first commanded bus reset at
the conclusion of ohci_enable() has been observed to fail with
the following messages:

[    4.884015] firewire_ohci 0000:01:00.0: failed to read phy reg
....
[    5.684012] firewire_ohci 0000:01:00.0: failed to read phy reg

With drivers/firewire/ohci.c instrumented, the error condition [2]
indicates the PHY arbitration state machine has timed out prior to
enabling PHY LCtrl.

Furthermore, instrumenting ohci_enable() shows that LPS has been
enabled within 1 ms.

Test LPS latching every 1 ms rather than every 50ms.

[1]  lspci -v

01:00.0 FireWire (IEEE 1394): LSI Corporation FW643 [TrueFire] PCIe 1394b Controller (rev 08) (prog-if 10 [OHCI])
	Subsystem: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller
	Flags: bus master, fast devsel, latency 0, IRQ 92
	Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 3
	Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Capabilities: [170] Device Serial Number 08-14-43-82-00-00-41-fc
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci

[2] instrumented WARNING in read_phy_reg()

[    4.576010] ------------[ cut here ]------------
[    4.576035] WARNING: at ./drivers/firewire/ohci.c:570 read_phy_reg+0x93/0xe0 [firewire_ohci]()
[    4.576050] Hardware name: Precision WorkStation T5400
[    4.576058] failed to read phy reg:1 (phy(5) @ config enhance:19)
[    4.576068] Modules linked in: hid_logitech_dj hid_generic(+) usbhid <...snip...>
[    4.576140] Pid: 61, comm: kworker/2:1 Not tainted 3.8.0-2+fwtest-xeon #2+fwtest
[    4.576149] Call Trace:
[    4.576160]  [<ffffffff8105468f>] warn_slowpath_common+0x7f/0xc0
[    4.576168]  [<ffffffff81054786>] warn_slowpath_fmt+0x46/0x50
[    4.576178]  [<ffffffffa00caca3>] read_phy_reg+0x93/0xe0 [firewire_ohci]
[    4.576188]  [<ffffffffa00cae19>] ohci_read_phy_reg+0x39/0x60 [firewire_ohci]
[    4.576203]  [<ffffffffa00731ff>] fw_send_phy_config+0xbf/0xe0 [firewire_core]
[    4.576214]  [<ffffffffa006b2d6>] br_work+0x46/0xb0 [firewire_core]
[    4.576225]  [<ffffffff81071e0c>] process_one_work+0x13c/0x500
[    4.576238]  [<ffffffffa006b290>] ? fw_card_initialize+0x180/0x180 [firewire_core]
[    4.576248]  [<ffffffff810737ed>] worker_thread+0x16d/0x470
[    4.576257]  [<ffffffff81073680>] ? busy_worker_rebind_fn+0x100/0x100
[    4.576266]  [<ffffffff8107d160>] kthread+0xc0/0xd0
[    4.576275]  [<ffffffff816a0000>] ? pcpu_dump_alloc_info+0x1cb/0x2c4
[    4.576284]  [<ffffffff8107d0a0>] ? kthread_create_on_node+0x130/0x130
[    4.576297]  [<ffffffff816b2f6c>] ret_from_fork+0x7c/0xb0
[    4.576305]  [<ffffffff8107d0a0>] ? kthread_create_on_node+0x130/0x130
[    4.576313] ---[ end trace cbc940994b300302 ]---

[Stefan R:  Peter also reports a change of behavior with LSI FW323.
Before the patch, there would often occur a lock transaction failure
during firewire-core startup:
[    6.056022] firewire_core 0000:07:06.0: BM lock failed (timeout), making local node (ffc0) root
This failure no longer happens after the patch, without an obvious
reason for the failure or the fix.]

[Stefan R:  Added quirk flag, quirk table entry, and comment.]

Reported-by: Tim Jordan <tim@insipid.org.uk>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30 20:30:15 +02:00
Andy Leiserson be8dcab942 firewire: ohci: fix VIA VT6306 video reception
Add quirk for VT6306 wake bit behavior.

VT6306 seems to reread the wrong descriptor when the wake bit is
written. work around by putting a copy of the branch address in the
first descriptor of the block.

[Stefan R:  This fixes the known broken video reception via gstreamer
on VIA VT6306.  100% repeatable testcase:
$ gst-launch-0.10 dv1394src \! dvdemux \! dvdec \! xvimagesink
with a camcorder or other DV source connected.  Likewise for MPEG2-TS
reception via gstreamer, e.g. from TV settop boxes.
Perhaps this also fixes dv4l on VT6306, but this is as yet untested.
Kino, dvgrab or FFADO had not been affected by this chip quirk.
Additional comments from Andy:]

I've looked into some problems with the wake bit on a vt6306 family
chip (1106:3044, rev 46).

I used this firewire card in a mythtv setup (ISO receive MPEG2 stream)
with Debian 2.6.32 kernels for ~2 years without problems.

Since upgrading to 3.2, I've been having problems with the input stream
freezing -- input data stops until I restart mythtv (I expect closing
and reopening the device would be sufficient). This happens
infrequently, maybe one out of 20 recordings. I eventually determined
that the problem is more likely to occur if the system is loaded.

I isolated the kernel version as the triggering SW factor and then
specifically the change from dualbuffer back to packet-per-buffer DMA
mode.

The possibility that the controller does not properly respond to the
wake bit was suggested in
https://bugzilla.redhat.com/show_bug.cgi?id=415841, but not proven.

Based on the fact that dualbuffer mode worked while packet-per-buffer
has trouble, I guessed that upon seeing the wake bit written, the vt6306
controller only checks the branch address in the first descriptor of the
block, even if that is not the correct place to look (because the block
has multiple descriptors).

This theory seems to be correct. When the ISO reception is hung, I am
able to resume it by manually writing the branch address to the first
descriptor in the block, and then writing the wake bit.

I've had luck so far with the attached patch, so I'm including it. It's
probably not a complete solution -- I haven't tested transmit modes to
see whether they have a similar issue.

I doubt that the quirk test is any cheaper than just writing the extra
branch address in all cases, but it does reduce the risk of breaking
other hardware.

[Stefan R:  omitted QUIRK_NO_MSI from VT6306 quirks table entry,
changed whitespace]

Signed-off-by: Andy Leiserson <andy@leiserson.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:44 +02:00
Peter Hurley 8db491490b firewire: ohci: Check LPS before register access on pci removal
A pci device can be removed while in its suspended state. If the ohci
host controller is suspended, the PHY is also in low-power mode and
LPS is disabled. If LPS is disabled, most of the host registers aren't
accessible, including IntMaskClear. Furthermore, access to these registers
when LPS is disabled can cause hard lockups on some hardware. Since
interrupts are already disabled in this mode, further action is
unnecessary.

Test LPS before attempting to write IntMaskClear to disable interrupts.

[Stefan R: whitespace changes]

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:44 +02:00
Peter Hurley 247fd50b59 firewire: ohci: Fix double free_irq()
A pci device can be removed while in its suspended state.
Because the ohci driver freed the irq to suspend, free_irq() is
called twice; once from pci_remove() and again from pci_suspend(),
which issues the warning below [1].

Rather than allocate the irq in the .enable() path, move the
allocation to .probe(). Consequently, the irq is not reallocated
upon pci_resume() and thus is not freed upon pci_suspend().

[1] Warning reported by Mark Einon <mark.einon@gmail.com> when
suspending an MSI MS-1727 GT740 laptop on Ubuntu 3.5.0-22-generic

WARNING: at ./kernel/irq/manage.c:1198 __free_irq+0xa3/0x1e0()
Hardware name: MS-1727
Trying to free already-free IRQ 16
Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables <...snip...>
Pid: 4, comm: kworker/0:0 Tainted: P           O 3.5.0-22-generic #34-Ubuntu
Call Trace:
 [<ffffffff81051c1f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff81051d16>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff8103fa39>] ? default_spin_lock_flags+0x9/0x10
 [<ffffffff810df6b3>] __free_irq+0xa3/0x1e0
 [<ffffffff810df844>] free_irq+0x54/0xc0
 [<ffffffffa005a27e>] pci_remove+0x6e/0x210 [firewire_ohci]
 [<ffffffff8135ae7f>] pci_device_remove+0x3f/0x110
 [<ffffffff8141fdbc>] __device_release_driver+0x7c/0xe0
 [<ffffffff8141fe4c>] device_release_driver+0x2c/0x40
 [<ffffffff8141f5f1>] bus_remove_device+0xe1/0x120
 [<ffffffff8141cd1a>] device_del+0x12a/0x1c0
 [<ffffffff8141cdc6>] device_unregister+0x16/0x30
 [<ffffffff81354784>] pci_stop_bus_device+0x94/0xa0
 [<ffffffffa0091c67>] acpiphp_disable_slot+0xb7/0x1a0 [acpiphp]
 [<ffffffffa0090716>] ? get_slot_status+0x46/0xc0 [acpiphp]
 [<ffffffffa0091d7d>] acpiphp_check_bridge.isra.15+0x2d/0xf0 [acpiphp]
 [<ffffffffa0092442>] _handle_hotplug_event_bridge+0x372/0x4d0 [acpiphp]
 [<ffffffff81390f8c>] ? acpi_os_execute_deferred+0x2f/0x34
 [<ffffffff8116e22d>] ? kfree+0xed/0x110
 [<ffffffff8107086a>] process_one_work+0x12a/0x420
 [<ffffffffa00920d0>] ? _handle_hotplug_event_func+0x1d0/0x1d0 [acpiphp]
 [<ffffffff8107141e>] worker_thread+0x12e/0x2f0
 [<ffffffff810712f0>] ? manage_workers.isra.26+0x200/0x200
 [<ffffffff81075f13>] kthread+0x93/0xa0
 [<ffffffff8168d024>] kernel_thread_helper+0x4/0x10
 [<ffffffff81075e80>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8168d020>] ? gs_change+0x13/0x13

Reported-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:44 +02:00
Stefan Richter cfb0c9d1ff firewire: remove unnecessary alloc/OOM messages
These are redundant to log messages from the mm core.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:44 +02:00
Stefan Richter d6c8cefc69 firewire: sbp2: replace BUG_ON by WARN_ON
No need to crash and burn if S/G element sizes cannot be set to our
liking; just leave a message in the log.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:44 +02:00
Stefan Richter bdabfa5463 firewire: core: remove an always false test
struct fw_cdev_allocate_iso_resource.bandwidth is unsigned.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:43 +02:00
Paul Bolle df7ce66363 firewire: Remove two unneeded checks for macros
The old IEEE 1394 driver stack was removed in v2.6.37. That made the
checks for two Kconfig (module) macros unneeded, since they will now
always evaluate to true. Remove these two checks.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28 23:36:43 +02:00
Simon Horman e5c5d22e8d net: add ETH_P_802_3_MIN
Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for
an 802.3 frame. Frames with a lower value in the ethernet type field
are Ethernet II.

Also update all the users of this value that David Miller and
I could find to use the new constant.

Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN
should be >= not >.

As suggested by Jesse Gross.

Compile tested only.

Cc: David Miller <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Bart De Schuymer <bart.de.schuymer@pandora.be>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: bridge@lists.linux-foundation.org
Cc: linux-wireless@vger.kernel.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: dev@openvswitch.org
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 01:20:42 -04:00