Commit Graph

2755 Commits

Author SHA1 Message Date
David Dillow 4924864404 IB/srp: allow sg_tablesize to be set for each target
Different configurations of target software allow differing max sizes of
the command IU. Allowing this to be changed per-target allows all
targets on an initiator to get an optimal setting.

We deprecate srp_sg_tablesize and replace it with cmd_sg_entries in
preparation for allowing more indirect descriptors than can fit in the
IU.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:35:05 -04:00
David Dillow 961e0be89a IB/srp: move IB CM setup completion into its own function
This is to clean up prior to further changes.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:34:48 -04:00
David Dillow 8c4037b501 IB/srp: always avoid non-zero offsets into an FMR
It is unclear exactly how this code works around Mellanox SRP targets,
or if the problem is on the target side or in the HCA itself. In an
abundance of caution, we should always enable the workaround.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:34:28 -04:00
Roland Dreier 043332cf28 Merge branches 'cma', 'cxgb4', 'ipath' and 'qib' into for-next 2011-03-15 10:58:04 -07:00
Sean Hefty a396d43a35 RDMA/cma: Replace global lock in rdma_destroy_id() with id-specific one
rdma_destroy_id currently uses the global rdma cm 'lock' to test if an
rdma_cm_id has been bound to a device.  This prevents an active
address resolution callback handler from assigning a device to the
rdma_cm_id after rdma_destroy_id checks for one.

Instead, we can replace the use of the global lock around the check to
the rdma_cm_id device pointer by setting the id state to destroying,
then flushing all active callbacks.  The latter is accomplished by
acquiring and releasing the handler_mutex.  Any active handler will
complete first, and any newly scheduled handlers will find the
rdma_cm_id in an invalid state.

In addition to optimizing the current locking scheme, the use of the
rdma_cm_id mutex is a more intuitive synchronization mechanism than
that of the global lock.  These changes are based on feedback from
Doug Ledford <dledford@redhat.com> while he was trying to debug a
crash in the rdma cm destroy path.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:57:34 -07:00
Sean Hefty 8d8ac86564 IB/cm: Cancel pending LAP message when exiting IB_CM_ESTABLISH state
This problem was reported by Moni Shoua <monis@mellanox.com> and Amir
Vadai <amirv@mellanox.com>:

	When destroying a cm_id from a context of a work queue and if
	the lap_state of this cm_id is IB_CM_LAP_SENT, we need to
	release the reference of this id that was taken upon the send
	of the LAP message.  Otherwise, if the expected APR message
	gets lost, it is only after a long time that the reference
	will be released, while during that the work handler thread is
	not available to process other things.

It turns out that we need to cancel any pending LAP messages whenever
we transition out of the IB_CM_ESTABLISH state.  This occurs when
disconnecting - either sending or receiving a DREQ.  It can also
happen in a corner case where we receive a REJ message after sending
an RTU, followed by a LAP.  Add checks and cancel any outstanding LAP
messages in these three cases.

Canceling the LAP when sending a DREQ fixes the destroy problem
reported by Moni.  When a cm_id is destroyed in the IB_CM_ESTABLISHED
state, it sends a DREQ to the remote side to notify the peer that the
connection is going away.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:56:12 -07:00
Sean Hefty 29963437a4 IB/cm: Bump reference count on cm_id before invoking callback
When processing a SIDR REQ, the ib_cm allocates a new cm_id.  The
refcount of the cm_id is initialized to 1.  However, cm_process_work
will decrement the refcount after invoking all callbacks.  The result
is that the cm_id will end up with refcount set to 0 by the end of the
sidr req handler.

If a user tries to destroy the cm_id, the destruction will proceed,
under the incorrect assumption that no other threads are referencing
the cm_id.  This can lead to a crash when the cm callback thread tries
to access the cm_id.

This problem was noticed as part of a larger investigation with kernel
crashes in the rdma_cm when running on a real time OS.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:56:12 -07:00
Sean Hefty 25ae21a101 RDMA/cma: Fix crash in request handlers
Doug Ledford and Red Hat reported a crash when running the rdma_cm on
a real-time OS.  The crash has the following call trace:

    cm_process_work
       cma_req_handler
          cma_disable_callback
          rdma_create_id
             kzalloc
             init_completion
          cma_get_net_info
          cma_save_net_info
          cma_any_addr
             cma_zero_addr
          rdma_translate_ip
             rdma_copy_addr
          cma_acquire_dev
             rdma_addr_get_sgid
             ib_find_cached_gid
             cma_attach_to_dev
          ucma_event_handler
             kzalloc
             ib_copy_ah_attr_to_user
          cma_comp

[ preempted ]

    cma_write
        copy_from_user
        ucma_destroy_id
           copy_from_user
           _ucma_find_context
           ucma_put_ctx
           ucma_free_ctx
              rdma_destroy_id
                 cma_exch
                 cma_cancel_operation
                 rdma_node_get_transport

        rt_mutex_slowunlock
        bad_area_nosemaphore
        oops_enter

They were able to reproduce the crash multiple times with the
following details:

    Crash seems to always happen on the:
            mutex_unlock(&conn_id->handler_mutex);
    as conn_id looks to have been freed during this code path.

An examination of the code shows that a race exists in the request
handlers.  When a new connection request is received, the rdma_cm
allocates a new connection identifier.  This identifier has a single
reference count on it.  If a user calls rdma_destroy_id() from another
thread after receiving a callback, rdma_destroy_id will proceed to
destroy the id and free the associated memory.  However, the request
handlers may still be in the process of running.  When control returns
to the request handlers, they can attempt to access the newly created
identifiers.

Fix this by holding a reference on the newly created rdma_cm_id until
the request handler is through accessing it.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:00:28 -07:00
Nicolas Kaiser 2a543904dd IB/ipath: Don't reset disabled devices
The comment some lines above states that disabled devices must not reset.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
2011-03-14 14:25:59 -07:00
Mitko Haralanov 36b87b419c IB/qib: Fix M_Key field in SubnGet and SubnGetResp MADs
Set the M_Key field in SubnGet and SugnGetResp MADs based on correctly
interpreting the protection level specified in the M_KeyProtBits field.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:11:51 -07:00
Mitko Haralanov 4634b7945c IB/qib: Set default LE2 value for active cables to 0
For active and far-EQ cables use an LE2 value of 0 for improved SI.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:10:34 -07:00
Steve Wise db5d040d7b RDMA/cxgb4: Debugfs dump_qp() updates
- Show whether the SQ is in onchip memory or not.
- Dump both SQ and RQ QIDs.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:14 -07:00
Steve Wise 767fbe8151 RDMA/cxgb4: Dispatch FATAL event on EEH errors
This at least kicks the user mode applications that are watching for
device events.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:13 -07:00
Steve Wise b48f3b9c10 RDMA/cxgb4: Use ULP_MODE_TCPDDP
Set the ULP mode for initial RDMA connection setup to the proper DDP
mode.  This avoids wasting some HW resources while in streaming mode.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:12 -07:00
Steve Wise a9c7719800 RDMA/cxgb4: Enable on-chip SQ support by default
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:12 -07:00
Steve Wise ffc3f7487f RDMA/cxgb4: Do CIDX_INC updates every 1/16 CQ depth CQE reaps
This avoids the CIDX_INC overflow issue with T4A2 when running
kernel RDMA applications.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:11 -07:00
Steve Wise 2942813739 RDMA/cxgb4: Remove db_drop_task
Unloading iw_cxgb4 can crash due to the unload code trying to use
db_drop_task, which is uninitialized.  So remove this dead code.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:10 -07:00
Steve Wise b52fe09e33 RDMA/cxgb4: Turn on delayed ACK
Set the default to on.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:09 -07:00
David S. Miller 4c9483b2fb ipv6: Convert to use flowi6 where applicable.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:54 -08:00
David S. Miller 1d28f42c1b net: Put flowi_* prefix on AF independent members of struct flowi
I intend to turn struct flowi into a union of AF specific flowi
structs.  There will be a common structure that each variant includes
first, much like struct sock_common.

This is the first step to move in that direction.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:44 -08:00
David S. Miller 78fbfd8a65 ipv4: Create and use route lookup helpers.
The idea here is this minimizes the number of places one has to edit
in order to make changes to how flows are defined and used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:42 -08:00
David S. Miller b23dd4fe42 ipv4: Make output route lookup return rtable directly.
Instead of on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 14:31:35 -08:00
David S. Miller 273447b352 ipv4: Kill can_sleep arg to ip_route_output_flow()
This boolean state is now available in the flow flags.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01 14:27:04 -08:00
David S. Miller 420d44daa7 ipv4: Make final arg to ip_route_output_flow to be boolean "can_sleep"
Since that is what the current vague "flags" argument means.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01 14:19:23 -08:00
Mike Christie 7c53c6f89d [SCSI] iser: export addr and port
This pactch has iser export the address and port
of the endpoint.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-24 12:41:23 -05:00
Mitko Haralanov cc7fb05946 IB/qib: Return correct MAD when setting link width to 255
Fix a bug which causes the driver to return incorrect MADs as a
response to Set(PortInfo) which sets the link width to 0xFF or link
speed to 0xF.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-22 16:56:37 -08:00
David S. Miller da935c66ba Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/e1000e/netdev.c
	net/xfrm/xfrm_policy.c
2011-02-19 19:17:35 -08:00
Roland Dreier 814b0a6120 Merge branches 'nes' and 'qib' into for-next 2011-02-17 14:04:59 -08:00
Mike Marciniszyn c0af2c057d IB/qib: Prevent double completions after a timeout or RNR error
There is a double completion associated with error handling for RC QPs.

The sequence is:

 - The do_rc_ack() routine fields an RNR nack and there are 0
   rnr_retries configured on the QP.
 - qib_error_qp() stops the pending timer
 - qib_rc_send_complete() is called from sdma_complete()
 - qib_rc_send_complete() starts the timer because the msb of the psn
   just completed says an ack is needed.
 - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP
 - rc_timeout() calls qib_restart_rc()
 - qib_restart_rc() calls qib_send_complete() with a
   IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the
   past

The fix avoids starting the timer since another packet will never
arrive.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-17 14:04:50 -08:00
Jiri Pirko 1765a57533 net: make dev->master general
dev->master is now tightly connected to bonding driver. This patch makes
this pointer more general and ready to be used by others.

 - netdev_set_master() - bond specifics moved to new function
   netdev_set_bond_master()
 - introduced netif_is_bond_slave() to check if device is a bonding slave

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 10:42:07 -08:00
Mike Marciniszyn 414ed90cee IB/qib: Fix double add_timer()
The following panic BUG_ON occurs during qib testing:

    Kernel BUG at include/linux/timer.h:82

    RIP  [<ffffffff881f7109>] :ib_qib:start_timer+0x73/0x89
     RSP <ffffffff80425bd0>
     <0>Kernel panic - not syncing: Fatal exception
     <0>Dumping qib trace buffer from panic
    qib_set_lid INFO: IB0:1 got a lid: 0xf8
    Done dumping qib trace buffer
    BUG: warning at kernel/panic.c:137/panic() (Tainted: G

The flaw is due to a missing state test when processing responses that
results in an add_timer() call when the same timer is already queued.
This code was executing in parallel with a QP destroy on another CPU
that had changed the state to reset, but the missing test caused to
response handling code to run on into the panic.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-10 11:24:08 -08:00
Maciej Sosnowski 25a54a6bb8 RDMA/nes: Don't generate async events for unregistered devices
nes_port_ibevent() should not be called when the nes RDMA device is not
registered with the RDMA core.  Add missing checks of of_device_registered flag.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-03 15:55:26 -08:00
Linus Torvalds 9118626a30 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA: Update missed conversion of flush_scheduled_work()
  RDMA/ucma: Copy iWARP route information on queries
  RDMA/amso1100: Fix compile warnings
  RDMA/cxgb4: Set the correct device physical function for iWARP connections
  RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
  IB/qib: Hold link for TX SERDES settings
  mlx4_core: Add ConnectX-3 device IDs
2011-02-03 11:19:26 -08:00
Roland Dreier e51c7b1ab0 Merge branches 'amso1100', 'cma', 'cxgb4', 'misc', 'mlx4' and 'qib' into for-next 2011-01-29 20:45:04 -08:00
Tejun Heo 96e61fa55e RDMA: Update missed conversion of flush_scheduled_work()
Commit f06267104d ("RDMA: Update workqueue usage") introduced ib_wq
and removed the use of flush_scheduled_work(); however, during the merge
process one chunk was lost in ib_sa_remove_one().  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 16:39:08 -08:00
Steve Wise e86f8b06f5 RDMA/ucma: Copy iWARP route information on queries
For iWARP rdma_cm ids, the "route" information is the L2 src and
next hop addresses.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 16:34:05 -08:00
Ralf Thielow f9a4f6dcdd RDMA/amso1100: Fix compile warnings
Fix compile warnings on 32-bit by using "0" instead of "(u64) NULL" to
assign to "c2_vq_req->reply_msg".

Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>

[ Change from "(unsigned long) NULL" to plain old "0" as suggested by
  Bart Van Assche <bvanassche@acm.org>.  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:40:25 -08:00
Steve Wise 94788657c9 RDMA/cxgb4: Set the correct device physical function for iWARP connections
The PF passed to FW was 0, causing PCI failures in an SR-IOV environment.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:34:28 -08:00
Steve Wise 6a09a9d694 RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
MAXBURST cannot exceed 256B for on-chip queues.  With a 512B MAXBURST,
we can lock up the chip.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:34:24 -08:00
Mitko Haralanov d70585f7de IB/qib: Hold link for TX SERDES settings
Hold the IB link at DISABLED until we get the correct TX settings
on mezz boards.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:30:02 -08:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Linus Torvalds 6845a44a31 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA: Update workqueue usage
  RDMA/nes: Fix incorrect SFP+ link status detection on driver init
  RDMA/nes: Fix SFP+ link down detection issue with switch port disable
  RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events
  RDMA/nes: Fix bonding on iw_nes
  IB/srp: Test only once whether iu allocation succeeded
  IB/mlx4: Handle protocol field in multicast table
  RDMA: Use vzalloc() to replace vmalloc()+memset(0)
  mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)
  IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-17 14:45:48 -08:00
Roland Dreier 4790f4dc5f Merge branches 'misc', 'mlx4', 'mthca', 'nes' and 'srp' into for-next 2011-01-16 21:22:41 -08:00
Tejun Heo f06267104d RDMA: Update workqueue usage
* ib_wq is added, which is used as the common workqueue for infiniband
  instead of the system workqueue.  All system workqueue usages
  including flush_scheduled_work() callers are converted to use and
  flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
  cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 21:16:31 -08:00
Maciej Sosnowski 843276ad98 RDMA/nes: Fix incorrect SFP+ link status detection on driver init
During iw_nes initialization the link status for SFP+ PHY is always
detected as "up" regardless of real state (cable either connected or
disconnected).  Add SFP+ PHY specific link status detection to the
iw_nes initialization procedure.  Use link status recheck for
netdev_open to detect delayed state updates.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:35 -08:00
Maciej Sosnowski 5f61b2c693 RDMA/nes: Fix SFP+ link down detection issue with switch port disable
In case of SFP+ PHY, link status check at interrupt processing can
give false results.  For proper link status change detection a delayed
recheck is needed to give nes registers time to settle.  Add a
periodic link status recheck scheduled at interrupt to detect
potential delayed registers state changes.

Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:34 -08:00
Maciej Sosnowski ea623455b7 RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events
Depending on link state change, IB_EVENT_PORT_ERR or
IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts.

Plugging in a cable happens to result in series of interrupts changing
driver's link state a number of times before finally staying at link
up (e.g. link up, link down, link up, link down, ..., link up).  To
prevent sending series of redundant IB_EVENT_PORT_ACTIVE and
IB_EVENT_PORT_ERR events, we use a timer to debounce them in
nes_port_ibevent().

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:34 -08:00
Maciej Sosnowski 2a4c97ead4 RDMA/nes: Fix bonding on iw_nes
Enable configuring bonds on nes devices by adding missing support for
master net_device to the driver.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:33 -08:00
Bart Van Assche 695b83495e IB/srp: Test only once whether iu allocation succeeded
Merge the two tests in srp_queuecommand() of whether information unit
allocation succeeded into one.  An intended side effect of this change
is that we fix the warning:

    drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_queuecommand':
    drivers/infiniband/ulp/srp/ib_srp.c:1116: warning: 'req' may be used uninitialized in this function

(seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y at least with gcc 4.4.4)

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-13 14:00:43 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Aleksey Senin da995a8aee IB/mlx4: Handle protocol field in multicast table
The newest device firmware stores IB vs. Ethernet protocol in two bits
in members_count field of multicast group table (0: Infiniband, 1:
Ethernet).  When changing the QP members count for a multicast group,
it important not to reset this information.  When calling multicast
attach first time, the protocol type should be specified.  In this
patch we always set it IB, but in the future we will handle Ethernet
too.  When looking for a QP, the protocol type shoud be checked too.

Signed-off-by: Aleksey Senin <alekseys@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 14:49:17 -08:00
Joe Perches 948579cd8c RDMA: Use vzalloc() to replace vmalloc()+memset(0)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 11:11:58 -08:00
Roland Dreier 4979d18fe1 mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)
Some systems have PCI addresses that don't fit in unsigned long (eg some
32-bit PowerPC 440 systems have 36-bit bus addresses).  Fix up mlx4 drivers
by using phys_addr_t where appropriate, so we don't truncate any PCI
resource addresses before ioremapping them.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 09:50:36 -08:00
John L. Burr eb4a7cbf27 IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
Some systems have PCI addresses that don't fit in unsigned long (eg some
32-bit PowerPC 440 systems have 36-bit bus addresses).  Fix up the driver
by using phys_addr_t where appropriate, so we don't truncate any PCI
resource addresses before ioremapping them.

Signed-off-by: John L. Burr <jlburr@cadence.com>

[ Update to apply to current driver source.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11 20:39:47 -08:00
Linus Torvalds f1d6d6cd90 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Fix refcount leak in lkey/rkey validation
  IB/qib: Improve SERDES tunning on QMH boards
  IB/qib: Unnecessary delayed completions on RC connection
  IB/qib: Issue pre-emptive NAKs on eager buffer overflow
  IB/qib: RDMA lkey/rkey validation is inefficient for large MRs
  IB/qib: Change QPN increment
  IB/qib: Add fix missing from earlier patch
  IB/qib: Change receive queue/QPN selection
  IB/qib: Fix interrupt mitigation
  IB/qib: Avoid duplicate writes to the rcv head register
  IB/qib: Add a few new SERDES tunings
  IB/qib: Reset packet list after freeing
  IB/qib: New SERDES init routine and improvements to SI quality
  IB/qib: Clear WAIT_SEND flags when setting QP to error state
  IB/qib: Fix context allocation with multiple HCAs
  IB/qib: Fix multi-Florida HCA host panic on reboot
  IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better
  IB/qib: UD send with immediate receive completion has wrong size
  IB/qib: Set port physical state even if other fields are invalid
  IB/qib: Generate completion callback on errors
  ...
2011-01-11 16:30:08 -08:00
Roland Dreier 2b76c05794 Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and 'srp' into for-next 2011-01-10 17:43:30 -08:00
Mike Marciniszyn 4db62d4786 IB/qib: Fix refcount leak in lkey/rkey validation
The mr optimization introduced a reference count leak on an exception
test.  The lock/refcount manipulation is moved down and the problematic
exception test now calls bail to insure that the lock is released.

Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>:
- reduce lock scope of dma regions
- use explicit values on returns vs. automatic ret value

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:23 -08:00
Mike Marciniszyn f2d255a078 IB/qib: Improve SERDES tunning on QMH boards
Improve the QMH SERDES tunning on initial driver load by having the
driver go through a link state change.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn dd04e43d46 IB/qib: Unnecessary delayed completions on RC connection
Currently on receipt of a response message (ACKs, RDMA Response,
Atomic Responses etc.) if the SDMA completion counter is not advanced
the driver delays the completion of the WQE.  In most cases this is
overly pessimistic as the response (ACK) to a previously transmitted
send implies that the send is complete.  Ensure that SDMA queue is
progressed appropriately before determining if a send has delayed
completions.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 994bcd28a3 IB/qib: Issue pre-emptive NAKs on eager buffer overflow
Under congestion resulting in eager buffer overflow attempt to send
pre-emptive NAKs if header queue entries with TID errors are generated
and a valid header is present.  This prevents long timeouts and flow
restarts if a trailing set of packets are dropped due to eager
overflows.  Pre-emptive NAKs are currently only supported for RDMA
writes.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 2a600f14d2 IB/qib: RDMA lkey/rkey validation is inefficient for large MRs
The current code loops during rkey/lkey validiation to isolate the MR
for the RDMA, which is expensive when the current operation is inside
a very large memory region.

This fix optimizes rkey/lkey validation routines for user memory
regions and fast memory regions.  The MR entry can be isolated by
shifts/mods instead of looping.  The existing loop is preserved for
phys memory regions for now.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 7c3edd3ff3 IB/qib: Change QPN increment
Changing from +1 to +2 allows for better QP distribution across
receive contexts.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 057ae62fac IB/qib: Add fix missing from earlier patch
The upstream code was missing part of a receive/error race fix from
the internal tree.  Add the missing part, which makes future merges
possible.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn 2528ea60f9 IB/qib: Change receive queue/QPN selection
The basic idea is that on SusieQ, the difficult part of mapping QPN to
context is handled by the mapping registers so the generic QPN
allocation doesn't need to worry about chip specifics.  For Monty and
Linda, there is no mapping table so the qpt->mask (same as
dd->qpn_mask), is used to see if the QPN to context falls within
[zero..dd->n_krcv_queues).

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn 19ede2e422 IB/qib: Fix interrupt mitigation
For SusieQ we need to write to the interrupt timer register before
updating the header queue head with interrupt count.  This is to
ensure that the timer is enabled properly and a receive available
interrupt is delivered.  Otherwise this interrupt can be lost if the
receiver header/eager queues are full before the timer is enabled.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn aa7374ac19 IB/qib: Avoid duplicate writes to the rcv head register
Avoid duplicate writes to the head register as this can lead to lost
interrupts if the context goes full before the second write is done.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn e706203c7c IB/qib: Add a few new SERDES tunings
Add new SERDES tuning to aid manufacturing.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn f73df408b2 IB/qib: Reset packet list after freeing
Reset the list pointers after freeing the SDMA packet list.  This is
done to any potential double-free cases.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn a0a234d47d IB/qib: New SERDES init routine and improvements to SI quality
Implement new SERDES initialization routine and improvements to signal
integrity -- disable LE1 adaptation, disable LOS after link-up, set
better SERDES parameters.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 16028f2777 IB/qib: Clear WAIT_SEND flags when setting QP to error state
If these flags are set when the QP is transitioned to the error state,
it will wait until the flags are cleared, which may never happen if
the error transition is due to a link going down.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 6676b3f746 IB/qib: Fix context allocation with multiple HCAs
The driver was incorrectly choosing HCAs on which to allocate new user
contexts based on overall count of usable ports regardless whether the
usable port was on the currently selected HCA.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 5dbbcb97cc IB/qib: Fix multi-Florida HCA host panic on reboot
Add check when setting configured contexts that the value does not
exceed the number of contexts allocated for the card.  If the value
exceeds the already allocated count, set it to what is already
allocated.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn b3d5cb2f20 IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better
When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver
only sees the ACTIVE state. With this change, it will check whether
the state was already ACTIVE and if so, it will not generated IB
events and will not clear symbol error counts.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn c7665e5a69 IB/qib: UD send with immediate receive completion has wrong size
The code to generate receive completion entries for UD send with
immediate contains the wrong payload length.  This is because when the
code to compute the payload size was moved, the value of hdrsize
didn't get moved too.  The fix is to update tlen directly.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 3c9e5f4d65 IB/qib: Set port physical state even if other fields are invalid
The IBTA vol. 1 release 1.2.1 spec. says:
C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall
make any changes it specifies to PortInfo:PortPhysicalState; any other
result is vendor-dependent.

The patch changes the error handling so that the reply says there are
invalid fields but still attempts to set fields that are in range
including PortInfo:PortPhysicalState.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn a377acd151 IB/qib: Generate completion callback on errors
According to IBTA vol. 1, C11-30.1.1, a notification callback is
invoked if the CQ is armed for the next solicited completion event or
an error completion.  The error case wasn't being generated correctly.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn f509f9c14d IB/qib: Add support for the new QME7362 card
Add support to recognize another board variation named QME7362.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn 0a43e11722 IB/qib: Add receive header queue size module parameters
The receive header queue sizes need to modified for performance
tuning.  Three module parameters are added to support this.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn 9d5b243f24 IB/qib: Remove IB latency turnoff
This is required for hardware testing.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Joe Perches 601d87b079 RDMA/nes: Fix string continuation line
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:14 -08:00
Dan Carpenter d0444f1527 IB/mthca: Handle -ENOMEM in forward_trap()
ib_create_send_mad() can return ERR_PTR(-ENOMEM) here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:10 -08:00
Dan Carpenter 1397490938 IB/mlx4: Handle -ENOMEM in forward_trap()
ib_create_send_mad() can return ERR_PTR(-ENOMEM) here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:06 -08:00
Vladimir Sokolovsky 3afa9f19e5 IB/mlx4: Don't call dma_free_coherent() with irqs disabled
mlx4_ib_free_cq_buf() should not be called under spin_lock_irq() since
it calls dma_free_coherent(), which needs irqs enabled.  Fix this by
deferring the free to outside the locked region.

This was found due to the

	WARN_ON(irqs_disabled());

in swiotlb_free_coherent().

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:06 -08:00
Or Gerlitz 8ae31e5b1f IPoIB: Add GRO support
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:41:55 -08:00
Or Gerlitz 19e364f680 IPoIB: Remove LRO support
As a first step in moving from LRO to GRO, revert commit af40da894e
("IPoIB: add LRO support").  Also eliminate the ethtool set_flags
callback which isn't needed anymore.  Finally, we need to include
<linux/sched.h> directly to get the declaration of restart_syscall()
(which used to be included implicitly through <linux/inet_lro.h>).

Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:41:54 -08:00
Joe Perches 1eba27e87a IB/ipath: Use printf extension %pR for struct resource
Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:41:50 -08:00
Steve Wise db8b101671 RDMA/cxgb4: Don't re-init wait object in init/fini paths
Re-initializing the wait object in rdma_init()/rdma_fini() causes a
timing window which can lead to a deadlock during close.  Once this
deadlock hits, all RDMA activity over the T4 device will be stuck.

There's no need to re-init the wait object, so remove it.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:41:43 -08:00
Stephen Hemminger c943109163 RDMA/cxgb3,cxgb4: Remove dead code
This removes unused code found by running 'make namespacecheck';
compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:41:43 -08:00
David Dillow 9af762719e IB/srp: consolidate hot-path variables into cache lines
Put the variables accessed together in the hot-path into common
cachelines, and separate them by RW vs RO to avoid false dirtying.
We keep a local copy of the lkey and rkey in the target to avoid
traversing pointers (and associated cache lines) to find them.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10 15:44:51 -05:00
Bart Van Assche e968467822 IB/srp: stop sharing the host lock with SCSI
We don't need protection against the SCSI stack, so use our own lock to
allow parallel progress on separate CPUs.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10 15:44:50 -05:00
Bart Van Assche 94a9174c63 IB/srp: reduce lock coverage of command completion
We only need the lock to cover list and credit manipulations, so push
those into srp_remove_req() and update the call chains.

We reorder the request removal and command completion in
srp_process_rsp() to avoid the SCSI mid-layer sending another command
before we've released our request and added any credits returned by the
target. This prevents us from returning HOST_BUSY unneccesarily.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out, small cleanups, and modified to avoid potential extraneous
  HOST_BUSY returns by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10 15:44:50 -05:00
Bart Van Assche 76c75b258f IB/srp: reduce local coverage for command submission and EH
We only need locks to protect our lists and number of credits available.
By pre-consuming the credit for the request, we can reduce our lock
coverage to just those areas. If we don't actually send the request,
we'll need to put the credit back into the pool.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10 15:44:49 -05:00
Bart Van Assche 536ae14e75 IB/srp: don't move active requests to their own list
We use req->scmnd != NULL to indicate an active request, so there's no
need to keep a separate list for them. We can afford the array iteration
during error handling, and dropping it gives us one less item that needs
lock protection.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10 15:44:42 -05:00
Linus Torvalds b4a45f5fe8 Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin
* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits)
  fs: scale mntget/mntput
  fs: rename vfsmount counter helpers
  fs: implement faster dentry memcmp
  fs: prefetch inode data in dcache lookup
  fs: improve scalability of pseudo filesystems
  fs: dcache per-inode inode alias locking
  fs: dcache per-bucket dcache hash locking
  bit_spinlock: add required includes
  kernel: add bl_list
  xfs: provide simple rcu-walk ACL implementation
  btrfs: provide simple rcu-walk ACL implementation
  ext2,3,4: provide simple rcu-walk ACL implementation
  fs: provide simple rcu-walk generic_check_acl implementation
  fs: provide rcu-walk aware permission i_ops
  fs: rcu-walk aware d_revalidate method
  fs: cache optimise dentry and inode for rcu-walk
  fs: dcache reduce branches in lookup path
  fs: dcache remove d_mounted
  fs: fs_struct use seqlock
  fs: rcu-walk for path lookup
  ...
2011-01-07 08:56:33 -08:00
Nick Piggin dc0474be3e fs: dcache rationalise dget variants
dget_locked was a shortcut to avoid the lazy lru manipulation when we already
held dcache_lock (lru manipulation was relatively cheap at that point).
However, how that the lru lock is an innermost one, we never hold it at any
caller, so the lock cost can now be avoided. We already have well working lazy
dcache LRU, so it should be fine to defer LRU manipulations to scan time.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:24 +11:00
Nick Piggin b5c84bf6f6 fs: dcache remove dcache_lock
dcache_lock no longer protects anything. remove it.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:23 +11:00
Nick Piggin b7ab39f631 fs: dcache scale dentry refcount
Make d_count non-atomic and protect it with d_lock. This allows us to ensure a
0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when
we start protecting many other dentry members with d_lock.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:21 +11:00
Bart Van Assche dcb4cb85f4 IB/srp: allow lockless work posting
Only one CPU at a time will own an RX IU, so using the address of the IU
as the work request cookie allows us to avoid taking a lock. We can
similarly prepare the TX path for lockless posting by moving the free TX
IUs to a list. This also removes the requirement that the queue sizes be
a power of 2.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out, small cleanups, and modified to avoid needing an extra field
  in the IU by David Dillow]
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-05 15:24:25 -05:00
Bart Van Assche 9709f0e05b IB/srp: consolidate state change code
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ broken out and small cleanups by David Dillow ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-05 15:24:25 -05:00
David Dillow f8b6e31e4e IB/srp: allow task management without a previous request
We can only have one task management comment outstanding, so move the
completion and status to the target port. This allows us to handle
resets of a LUN without a corresponding request having been sent.
Meanwhile, we don't need to play games with host_scribble, just use it
as the pointer it is.

This fixes a crash when we issue a bus reset using sg_reset.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=13893
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-05 15:24:25 -05:00
David S. Miller 17f7f4d9fc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/ipv4/fib_frontend.c
2010-12-26 22:37:05 -08:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Dan Carpenter 7182afea8d IB/uverbs: Handle large number of entries in poll CQ
In ib_uverbs_poll_cq() code there is a potential integer overflow if
userspace passes in a large cmd.ne.  The calls to kmalloc() would
allocate smaller buffers than intended, leading to memory corruption.
There iss also an information leak if resp wasn't all used.
Unprivileged userspace may call this function, although only if an
RDMA device that uses this function is present.

Fix this by copying CQ entries one at a time, which avoids the
allocation entirely, and also by moving this copying into a function
that makes sure to initialize all memory copied to userspace.

Special thanks to Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
for his help and advice.

Cc: <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>

[ Monkey around with things a bit to avoid bad code generation by gcc
  when designated initializers are used.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-08 15:23:49 -08:00
Linus Torvalds 75318ec327 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Fix information leak in marshalling code
  IB/pack: Remove some unused code added by the IBoE patches
  IB/mlx4: Fix IBoE link state
  IB/mlx4: Fix IBoE reported link rate
  mlx4_core: Workaround firmware bug in query dev cap
  IB/mlx4: Fix memory ordering of VLAN insertion control bits
  MAINTAINERS: Update NetEffect entry
2010-12-02 12:10:56 -08:00
Roland Dreier 7adce751ce Merge branches 'misc', 'mlx4' and 'nes' into for-next 2010-12-01 16:33:47 -08:00
Vasiliy Kulikov 91a4d157d0 IB: Fix information leak in marshalling code
ib_ucm_init_qp_attr() and ucma_init_qp_attr() pass struct ib_uverbs_qp_attr
with reserved, qp_state, {ah_attr,alt_ah_attr}{reserved,->grh.reserved}
fields uninitialized to copy_to_user().  This leads to leaking of
contents of kernel stack memory to userspace.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01 16:33:18 -08:00
Or Gerlitz f55864a4f4 IB/pack: Remove some unused code added by the IBoE patches
Remove unused functions added by commit ff7f5aab35 ("IB/pack: IBoE UD
packet packing support").

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
2010-12-01 16:30:18 -08:00
Eli Cohen 21d606090e IB/mlx4: Fix IBoE link state
Use netif_running() and netif_carrier_ok() to report link state,
exactly as is done to report Ethernet link state in sysfs.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01 16:11:29 -08:00
Eli Cohen 328266c561 IB/mlx4: Fix IBoE reported link rate
The link rate is the product of the link speed in the link width. For
Etherent ports the rate is 10G, so we use 1 for the width and 4 for
speed to get the correct rate.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01 16:10:35 -08:00
Eli Cohen e27535b9c6 IB/mlx4: Fix memory ordering of VLAN insertion control bits
We must fully update the control segment before marking it as valid,
so that hardware doesn't start executing it before we're ready.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>

[ Move VLAN control bit setting to before wmb().  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01 11:08:54 -08:00
Eric Dumazet 22f4fbd9bd infiniband: remove dev_base_lock use
dev_base_lock is the legacy way to lock the device list, and is planned
to disappear. (writers hold RTNL, readers hold RCU lock)

Convert rdma_translate_ip() and update_ipv6_gids() to RCU locking.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-24 11:41:56 -08:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Jeff Garzik f281233d3e SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00
Jesper Juhl e987fa357a infiniband: Only include mutex.h once in drivers/infiniband/hw/cxgb4/iw_cxgb4.h
Only include the header linux/mutex.h once inside
drivers/infiniband/hw/cxgb4/iw_cxgb4.h

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-15 14:35:19 +01:00
Eric Dumazet 72cdd1d971 net: get rid of rtable->idev
It seems idev field in struct rtable has no special purpose, but adding
extra atomic ops.

We hold refcounts on the device itself (using percpu data, so pretty
cheap in current kernel).

infiniband case is solved using dst.dev instead of idev->dev

Removal of this field means routing without route cache is now using
shared data, percpu data, and only potential contention is a pair of
atomic ops on struct neighbour per forwarded packet.

About 5% speedup on routing test.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11 10:29:40 -08:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Al Viro fc14f2fef6 convert get_sb_single() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:28 -04:00
Linus Torvalds 426e1f5cec Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  split invalidate_inodes()
  fs: skip I_FREEING inodes in writeback_sb_inodes
  fs: fold invalidate_list into invalidate_inodes
  fs: do not drop inode_lock in dispose_list
  fs: inode split IO and LRU lists
  fs: switch bdev inode bdi's correctly
  fs: fix buffer invalidation in invalidate_list
  fsnotify: use dget_parent
  smbfs: use dget_parent
  exportfs: use dget_parent
  fs: use RCU read side protection in d_validate
  fs: clean up dentry lru modification
  fs: split __shrink_dcache_sb
  fs: improve DCACHE_REFERENCED usage
  fs: use percpu counter for nr_dentry and nr_dentry_unused
  fs: simplify __d_free
  fs: take dcache_lock inside __d_path
  fs: do not assign default i_ino in new_inode
  fs: introduce a per-cpu last_ino allocator
  new helper: ihold()
  ...
2010-10-26 17:58:44 -07:00
Linus Torvalds 9e5fca251f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)
  IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
  IB/qib: Allow driver to load if PCIe AER fails
  IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
  IB/qib: Fix extra log level in qib_early_err()
  RDMA/cxgb4: Remove unnecessary KERN_<level> use
  RDMA/cxgb3: Remove unnecessary KERN_<level> use
  IB/core: Add link layer type information to sysfs
  IB/mlx4: Add VLAN support for IBoE
  IB/core: Add VLAN support for IBoE
  IB/mlx4: Add support for IBoE
  mlx4_en: Change multicast promiscuous mode to support IBoE
  mlx4_core: Update data structures and constants for IBoE
  mlx4_core: Allow protocol drivers to find corresponding interfaces
  IB/uverbs: Return link layer type to userspace for query port operation
  IB/srp: Sync buffer before posting send
  IB/srp: Use list_first_entry()
  IB/srp: Reduce number of BUSY conditions
  IB/srp: Eliminate two forward declarations
  IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
  IB: Replace EXTRA_CFLAGS with ccflags-y
  ...
2010-10-26 17:54:22 -07:00
Hagen Paul Pfeifer 732eacc054 replace nested max/min macros with {max,min}3 macro
Use the new {max,min}3 macros to save some cycles and bytes on the stack.
This patch substitutes trivial nested macros with their counterpart.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:12 -07:00
Roland Dreier 116e9535fe Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', 'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next 2010-10-26 16:09:11 -07:00
Jason Gunthorpe 2ca78d23a7 IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
Clean up properly if pci_set_consistent_dma_mask() fails.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26 16:09:02 -07:00
Ralph Campbell 5d26a1df23 IB/qib: Allow driver to load if PCIe AER fails
Some PCIe root complex chip sets don't support advanced error reporting.
Allow the driver to load OK if pci_enable_pcie_error_reporting() fails.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26 16:09:02 -07:00
Ralph Campbell 9e43e0106d IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
If CONFIG_PCI_MSI is not set, and a QLE7140 is present, the pointer
"dd" is uninitialized.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26 16:09:02 -07:00
Jason Gunthorpe 82fdb0ab54 IB/qib: Fix extra log level in qib_early_err()
Noticed this odd looking thing in dmesg:

    ib_qib 0000:02:00.0: <3>ib_qib: Unable to enable pcie error reporting: -5

which is due to a bad use of dev_info.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26 16:09:02 -07:00
Joe Perches aa1ad26089 RDMA/cxgb4: Remove unnecessary KERN_<level> use
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26 13:45:59 -07:00
Joe Perches ca7cf94f8b RDMA/cxgb3: Remove unnecessary KERN_<level> use
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26 13:45:49 -07:00
Christoph Hellwig 85fe4025c6 fs: do not assign default i_ino in new_inode
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Eli Cohen 8ad330a002 IB/core: Add link layer type information to sysfs
Since an IB transport port may use either IB or Ethernet as its link layer,
add the file /sys/class/infiniband/<device>/ports/<port_num>/link_layer to
show the link layer for the port.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen 4c3eb3ca13 IB/mlx4: Add VLAN support for IBoE
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged
VLAN frames.  The VLAN tag is encoded in the GID and derived from it
by a simple computation.

The netdev notifier callback is modified to catch VLAN device
addition/removal and the port's GID table is updated to reflect the
change, so that for each netdevice there is an entry in the GID table.
When the port's GID table is exhausted, GID entries will not be added.
Only children of the main interfaces can add to the GID table; if a
VLAN interface is added on another VLAN interface (e.g. "vconfig add
eth2.6 8"), then that interfaces will not add an entry to the GID
table.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen af7bd46376 IB/core: Add VLAN support for IBoE
Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the
GID derived from a link local address in the following way:

    GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN.

The 3 bits user priority field of the packets are identical to the 3
bits of the SL.

In case of rdma_cm apps, the TOS field is used to generate the SL
field by doing a shift right of 5 bits effectively taking to 3 MS bits
of the TOS field.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen fa417f7b52 IB/mlx4: Add support for IBoE
Add support for IBoE to mlx4_ib.  The bulk of the code is handling the
new address vector fields; mlx4 needs the MAC address of a remote node
to include it in a WQE (for datagrams) or in the QP context (for
connected QPs).  Address resolution is done by assuming all unicast
GIDs are either link-local IPv6 addresses.

Multicast group attach/detach needs to update the NIC's multicast
filters; but since attaching a QP to a multicast group can be done
before the QP is bound to a port, for IBoE we need to keep track of
all multicast groups that a QP is attached too before it transitions
from INIT to RTR (since it does not have a port in the INIT state).

Signed-off-by: Eli Cohen <eli@mellanox.co.il>

[ Many things cleaned up and otherwise monkeyed with; hope I didn't
  introduce too many bugs.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen 2420b60b1d IB/uverbs: Return link layer type to userspace for query port operation
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
David Dillow 19081f31ce IB/srp: Sync buffer before posting send
srp_send_tsk_mgmt() was missing the proper DMA sync calls before posting
the buffer to the device.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24 22:14:23 -07:00
Bart Van Assche 21c1a90769 IB/srp: Use list_first_entry()
Use the list_first_entry() macro in ib_srp instead of open-coding the equivalent,
which makes the source code slightly more descriptive.  The list_first_entry()
macro itself was introduced in kernel 2.6.22.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24 22:14:19 -07:00
Bart Van Assche 7ade400aba IB/srp: Reduce number of BUSY conditions
As proposed by the SRP (draft) standard, ib_srp reserves one ring
element for SRP_TSK_MGMT requests. This patch makes sure that the SCSI
mid-layer never tries to queue more than (SRP request limit) - 1 SCSI
commands to ib_srp. This improves performance for targets whose request
limit is less than or equal to SRP_NORMAL_REQ_SQ_SIZE by reducing the
number of BUSY responses reported by ib_srp to the SCSI mid-layer.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24 22:14:14 -07:00
David Dillow 05a1d7504f IB/srp: Eliminate two forward declarations
Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24 22:14:08 -07:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Jack Morgenstein d0d68b8693 IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
The Node Description cannot be changed via MADs (it is read-only).
Until now, it was changed in the driver via sysfs, and the new Node
Description was simply inserted by the driver into MAD responses
(replacing the description returned by FW).

System startup scripts use the sysfs interface to change the node
description at driver startup to show the hostname, etc. However, this
has a race condition: the SM could discover the original FW node
description rather than the system-specific description if it queried the
port before the startup scripts finish running.

For mlx4, we fix this with a new FW command (SET_NODE) that allows
passing the new node description to FW.  When this command is invoked,
FW sends a trap 144 to the SM.  When it gets this trap, the SM can
query the node to obtain the new node description -- thus eliminating
the effects of the race.

This patch simply calls SET_NODE command when a new node description
is entered via sysfs (thus causing trap 144 to be issued by the FW).
We ignore all failures of the SET_NODE command (including those caused
by using a device FW that predates the SET_NODE command), since in
that case things work just as before.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23 13:53:09 -07:00
matt mooney 7454159d3c IB: Replace EXTRA_CFLAGS with ccflags-y
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23 13:45:03 -07:00
Steve Wise 97cb7e40c6 RDMA/ucma: Allow tuning the max listen backlog
For iWARP connections, the connect request is carried in a TCP payload
on an already established TCP connection.  So if the ucma's backlog is
full, the connection request is transmitted and acked at the TCP level
by the time the connect request gets dropped in the ucma.  The end
result is the connection gets rejected by the iWARP provider.
Further, a 32 node 256NP OpenMPI job will generate > 128 connect
requests on some ranks.

This patch increases the default max backlog to 1024, and adds a
sysctl variable so the backlog can be adjusted at run time.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23 13:41:40 -07:00
Eli Cohen c3aa9b186b IPoIB: Set dev_id field of net_device
Use the net device's dev_id field to encode the port number of the pci
device.  This can be used to to associate a net device with the pci
device's port. The encoding is: dev_id = port - 1.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23 13:35:48 -07:00
Linus Torvalds 5f05647dd8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-23 11:47:02 -07:00
David Dillow bb12588a38 IB/srp: Implement SRP_CRED_REQ and SRP_AER_REQ
This patch adds support for SRP_CRED_REQ to avoid a lockup by targets
that use that mechanism to return credits to the initiator. This
prevents a lockup observed in the field where we would never add the
credits from the SRP_CRED_REQ to our current count, and would therefore
never send another command to the target.

Minimal support for SRP_AER_REQ is also added, as these messages can
also be used to convey additional credits to the initiator.

Based upon extensive debugging and code by Bart Van Assche and a bug
report by Chris Worley.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22 22:19:10 -07:00
Bart Van Assche dd5e6e38b2 IB/srp: Preparation for transmit ring response allocation
The transmit ring in ib_srp (srp_target.tx_ring) is currently only used
for allocating requests sent by the initiator to the target. This patch
prepares using that ring for allocation of both requests and responses.
Also, this patch differentiates the uses of SRP_SQ_SIZE, increases the
size of the IB send completion queue by one element and reserves one
transmit ring slot for SRP_TSK_MGMT requests.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22 22:19:10 -07:00
Jason Gunthorpe 5715f5d44b IB/qib: Process RDMA WRITE ONLY with IMMEDIATE properly
See table 35 in IBA - the header order for RDMA_WRITE_ONLY_WITH_IMMEDIATE
and SEND_LAST_WITH_IMMEDIATE is different: the RDMA_WRITE_ONLY has
a RETH header before the immediate data, so we need a different code path
to extract the immediate data.

I tested this with a userspace app that does RDMA_WRITE with immediate
on a QLE7140.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22 22:12:15 -07:00
Steve Wise b955150ea7 RDMA/cxgb3: When a user QP is marked in error, also mark the CQs in error
The flushing of work requests for user QPs is implemented entirely in
the user mode library.  The only kernel interaction is to mark the
user QP object indicating it is in error when the QP exits RTS.  When
the user QP operations are called by the application (eg: post_send,
post_recv), the QP in error bit is checked and if set, the library
flushes the QP.  If, however, the application is not doing IO, but
rather just polling the CQ, it will never get flushed work requests.
This breaks some classes of applications.

This patch adds logic to mark user CQs in error when a QP that is bound
to the CQ is marked in error.  The library poll code can then notice
the CQ is in error and flush all the in error QPs bound to that CQ.

Design:

 - add 1 extra CQE entry to the CQ memory that will be used to indicate
   in error status.
 - return the desired CQ memory size that should be mapped by the library
 - bump the ABI since the create_cq uverbs response changes.
 - detect older libraries and reduce the mmap size accordingly.
   (The ABI bump doesn't break old libraries, since they didn't check
   the ABI field anyway)

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22 22:00:53 -07:00
Steve Wise da411ba1da RDMA/cxgb4: Use cxgb4 service for packet gl to skb
Remove the local service t4_pktgl_to_skb() and use cxgb4_pktgl_to_skb()
exported by cxgb4.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22 21:58:50 -07:00
Steve Wise de5dd81b49 RDMA/cxgb4: Export T4 TCP MIB
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22 21:57:26 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00