These are now handled through the chan_spec arrays and no one
is using them anymore.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
id wasn't used anywhere and st->irq can be removed by simply
passing it into the core remove function (trivially available in
the two bus implementations).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Other than a few slight refactorings the local version was pretty standard
so replace it and rework to get rid of st->d_size which it setup.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To my mind, if a gpio is specified in the board file, yet fails
to be successfully requested, that is an error condidtion and
the driver should not muddle on regardless.
This does mean unwinding the gpios on error. Also the free_gpios
function is reordered so that it is consistent with the request one
(reverse order obviously).
This patch is the category of not technically fixing anything, just
making the driver be more in line with what a reviewer will expect.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IIO_CHAN is being phased out and in this case things are so
simple it makes sense to have a local one parameter equivalent.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Saves on setting the value of address for the simple situation seen in this
device. They are already used interchangably to get data from the buffer.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is much cleaner than bouncing through the various structures
to get to the same thing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Preparation for moving driver out of staging.
That macro is a nightmare to maintain so it is going away.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A few of these had the wrong shifts, which would lead to
userspace hacking off the top couple of bits. Also, one
part had the wrong accuracy.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The suspend commands need to be sent using the
synchronous method, otherwise the power gets
disabled before the messages are transferred.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Rewrote commit message]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the comment indicates, adding that udelay seems to
improve the stability of the communication, although
it is not known why this is the case.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the includes that are currently missing in nvec.h
and nvec.c and reorder them alphabetically.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The nvec_power system polls nvec for battery information. In some
cases, that part seems to be overloaded and unable to respond
fast in which case it sends an incomplete response. We need to
mark the transfer as completed, though, in order to prevent
endless retries which can kill nvec.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Get 4 bytes of data from nvec at once instead of just a single
byte. This makes the driver more similar to nvidias and might
improve reliability.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Return the return value of nvec_write_async() in the methods
returning an int.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reject incomplete messages, causing the request to be
transmitted again. This should fix various problems
out there.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If no RX buffer is available in state 1, jump to state
0 again. This will produce an incredible amount of
warnings, but it is not supposed to happen anyway.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allow TX buffers to be allocated only in the upper 75% of the pool
to avoid a completely filled buffer preventing the driver from
processing responses. This also improves performance, as RX
allocations do not require checking buffers allocated for TX
unless there are more than 16 incoming messages -- which is
highly unlikely.
An earlier version used the lower 75% for TX messages, but
that was considered to be not that effective due to the
overlaps of RX and TX buffers mentioned above.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Client code wishing to make use of nvec_write_sync() must
have a way to free the returned pointer, otherwise we run
out of poool memory fairly soon.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Those macros are needed only for implementation purposes and
do not have any use for other code wishing to use nvec.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add kernel-doc comments describing the functions
and structs we currently have.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change nvec_write_async() to return an integer, 0 by default,
a negative error on failure. Change nvec_write_sync() to
check the return value and abort if it is negative.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When the caps lock key is pressed, toggle the associated
LED. According to Nvidia code, we should send 0x01 where
we sent 0x07, but this does not appear to work correctly
on the AC100.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Forgotten in the last commit(s) which contained the copyrightable
material, so let's add it now. I believe that only my nvec.c
contributions are copyrightable, nvec.h is just interface naming,
so does not deserve that yet.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The scratch area is not part of the pool and thus gets
no allocation message. Printing a free message would
be confusing, and the pointer subtraction would be
undefined behavior.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rewrite the interrupt handler to use a state machine similar to
that found in the various kernels for the Advent Vega. This also
changes the code to use the new functions introduced in the
previous commits.
This also merges the rewrite sent in August 2011 by Marc
Dietrich, and thus also includes code by him. His original
patch can be found on the mailing list.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add functions nvec_msg_is_event() and nvec_msg_size() which
do just what the say: tell whether the message is an event,
and getting the size of the message.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce nvec_gpio_set_value(), which works like
gpio_set_value(), but also creates a debugging
message, if that's enabled.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce two new functions nvec_msg_alloc() and nvec_msg_free()
that allocate and free message buffers from the internal pool
of messages.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds config dependencies for the NVEC keyboard, mouse,
and power drivers.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mostly small stuff only. Hopefully completed during the next
release cycle.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Removed some items no longer valid]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for LEDs connect to a nvec. A single brightness
property is exported to sysfs. LEDs are selected via bitfields in the
brightness value. Also the blinking behavior is selected through this
method. Vendors may use different values for different HW designs.
Signed-off-by: Ilya Petrov <ilya.muromec@gmail.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Fixed checkpatch warnings]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ec command used was for muting, not unmuting.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework the tegra slave controller init to look more like in
tegra-i2c.c. This makes the nvec init reliable. Also add de-init of
the slave to be used during suspend.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Split of the previous patch and the next by Marc, as that
patch is not strictly a coding style fix only.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes coding style and adds copyright notices.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Merge later cleanup into that patch]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Those headers were apparently included by other headers
previously, but are not anymore.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch alters a line of code to make it more readable
and easier to understand. The purpose of the original line
of code was to compute the amount of memory to request from
kmalloc. This mulit-step algorithm was being done in one
line of code, thus making it more difficult to understand.
Therefore, I split this algorithm into three logical steps.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes two issues within bcm/Bcmchar.c. The
first condition in the or statement checks if variable
IoBuffer.OutputLength, defined from user space, is
greater than the maximum value allowed for an
unsigned short. IoBuffer.OutputLength is then used
in a kmalloc call to return a pointer to memory. If
this size is greater than an unsigned short, it
becomes useless. The second condition in the or statement
checks if the same variable, IoBuffer.OutputLength is
equal to zero before invoking the kmalloc call. In
this case, if a zero size is sent to kmalloc, a valid
pointer to memory is returned instead of the expected NULL.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Checking carrier status in netvsc_open() is not necessary.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
param->u.wpa_key.key_len comes from the user. If it's too large we
would write past the end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was originally there to avoid churn during a complex change.
Now everything is stable lets get rid of this as it is missleading
and confusing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that all vmbus audit related comments have been addressed,
update the TODO file to reflect this.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WE21 clarified that ESSID should not be NULL terminated.
The existing code didn't NULL terminate, but did play with length
and then reset it again. Just stop it.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WEXT changes between versions 15 and 21 have been taken care of,
so update the declared support.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add recently added events to the capabilities reported in iw_range.
Use capability macros instead of assuming the array offsets.
Explicitly list scan capabilities.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers: staging: comedi: cb_das16_cs.c
fixed over 80 line issue, and removed a space before tab issue.
Signed-off-by: Christopher Rice <rice.christopher.a@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added log subject to printk()s in drivers/staging/comedi/drivers/pcmmio.c.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Smatch has a new check for Rosenberg type information leaks where
structs are copied to the user with uninitialized stack data in them.
In this path, the .uLinkRate member doesn't get initialized so I've
set it to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the source file there are a lot of warnings. I will send it in parts to be more easy to
review. All the changes in this file its just alignment, and things like that.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver has a long standing bug where removing and inserting the ethernet cable results in no packets being
trnasmitted / received and hence no autonegotiation occurring.
Fixed by resetting the rx/tx engines and queue on detecting a cable being removed.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
et131x_check_mii no longer exists, remove its declaration from the header file
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In et131x_netdev.c, a series of calls to enable and diasble the rx/tx engine and queue are being used in several different places.
Create two functions to encapsulate these calls, and replace many calls with just the one.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
et131x_check_mii() is now only being called from et131x_adjust_link.
Removed this call and associated subroutines, putting the functionality directly into et131x_adjust_link(), in preparation for further simplification.
Changed register checks from bare BMSR checks to use phydev/netif versions, also now uses adapter->link to track link state changes.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This will be used to determine if the link state has changed when the phydev
informs the et131x that a change has occurred (in et131x_adjust_link)
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not an exhaustive dump of the et131x registers, used while debugging a specific problem - seems a shame not to keep it around.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for GTT based scrolling. Instead of pushing bits around we simply
use the GTT to change the mappings. This provides us with a very fast way to
scroll the display providing we have enough memory to allocate on 4K line
boundaries. In practice this seems to be the case except for very big displays
such as HDMI. It works out nicely on the usual configurations are netbooks and
tablets.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we are the console then a printk can hit us with a spin lock held (and
in fact the kernel will do its best to take printing lock).
In that case we cannot politely sleep when synching after an accelerated op
but must behave obnixously to be sure of getting the bits out.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix ak8975_probe() to jump to the appropriate exit labels when an error
occurs. With the previous code, some cleanup actions were being skipped
for some error conditions.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gpio_is_valid() is the defined mechanism to determine whether a GPIO is
valid. Use this instead of assuming that 0 is an invalid GPIO.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tegra doesn't have irq_to_gpio() any more, and ak8975 is included in
tegra_defconfig. This causes a build failure. Instead, pass the GPIO name
through platform data.
[swarren: Rewrote commit description when I squashed this with my patch
to remove the irq_to_gpio() call]
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver already supports kfifo usage, so the term ring is
misleading and hence replaced.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They aren't always ring buffers, so just use buffer for all naming.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nothing in this file is specific to RING buffers so rename it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
also, IIO_RING_HARDWARE_BUFFER -> IIO_BUFFER_HARDWARE
These aren't always rings so the naming should not imply that.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not always a ring so naming is missleading.
Also, kfifo_buf is probably first buffer to take out of staging and it
definitely isn't a ring.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Numerous small fixes and additions of missing elements.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have a lot of drivers now, so the iio sub menu becomes quite large.
This patch creates sub menus for the different sensors.
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The existing ad7745 driver didn't conform with the IIO spec for such devices.
It was way simpler to rewrite the existing driver, than actually fixing it.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
moving the final state, clearing of the client maps and
updating of mei state out from mei_host_client_properties function.
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
COUNTRY_CODE_MAX is not a valid country code. We're off by one here.
This gets passed to Dot11d_Channelmap() where it's used as an offset
into the ChannelPlan[] array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Various names (ndev, net, dev) were used for the
same structure. Settled for 'ndev'.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added comments to make code more readable.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There was no performance rationale to use these guys.
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
By deleting three redundant functions. The spinlock was related to
event queue operation. Event queue data members were also renamed
to make their function more clear.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use constant for idle time setting.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use constant to replace global variable used for watchdog polling
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replaced the global variable with constant
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use work queue to defer cfg80211 event handle jobs
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Using a block statement to scope function variables is not
common in linux kernel development. Browsed through the brcmfmac
to remove those.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Structure that is received from dongle has been annotated.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Structure that is send/received to/from dongle has been annotated.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron
Marc Dietrich
Julian Andres Klode
Ilya Petrov
Kevin McKinney
Haiyang Zhang
Dan Carpenter
K. Y. Srinivasan
David Kilroy
Christopher Rice
Johannes Thumshirn
Marcos Paulo de Souza
Mark Einon
Alan Cox
Stephen Warren
Manuel Stahl
Michael Hennerich
Jaap Crezee
Oren Weil
Roland Vossen
Franky Lin
Arend van Spriel