Commit Graph

72 Commits

Author SHA1 Message Date
Julian Anastasov 0d79641a96 ipvs: provide address family for debugging
As skb->protocol is not valid in LOCAL_OUT add
parameter for address family in packet debugging functions.
Even if ports are not present in AH and ESP change them to
use ip_vs_tcpudp_debug_packet to show at least valid addresses
as before. This patch removes the last user of skb->protocol
in IPVS.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 11:04:43 +02:00
Julian Anastasov fc60476761 ipvs: changes for local real server
This patch deals with local real servers:

- Add support for DNAT to local address (different real server port).
It needs ip_vs_out hook in LOCAL_OUT for both families because
skb->protocol is not set for locally generated packets and can not
be used to set 'af'.

- Skip packets in ip_vs_in marked with skb->ipvs_property because
ip_vs_out processing can be executed in LOCAL_OUT but we still
have the conn_out_get check in ip_vs_in.

- Ignore packets with inet->nodefrag from local stack

- Require skb_dst(skb) != NULL because we use it to get struct net

- Add support for changing the route to local IPv4 stack after DNAT
depending on the source address type. Local client sets output
route and the remote client sets input route. It looks like
IPv6 does not need such rerouting because the replies use
addresses from initial incoming header, not from skb route.

- All transmitters now have strict checks for the destination
address type: redirect from non-local address to local real
server requires NAT method, local address can not be used as
source address when talking to remote real server.

- Now LOCALNODE is not set explicitly as forwarding
method in real server to allow the connections to provide
correct forwarding method to the backup server. Not sure if
this breaks tools that expect to see 'Local' real server type.
If needed, this can be supported with new flag IP_VS_DEST_F_LOCAL.
Now it should be possible connections in backup that lost
their fwmark information during sync to be forwarded properly
to their daddr, even if it is local address in the backup server.
By this way backup could be used as real server for DR or TUN,
for NAT there are some restrictions because tuple collisions
in conntracks can create problems for the traffic.

- Call ip_vs_dst_reset when destination is updated in case
some real server IP type is changed between local and remote.

[ horms@verge.net.au: removed trailing whitespace ]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 11:03:46 +02:00
Julian Anastasov 190ecd27cd ipvs: do not schedule conns from real servers
This patch is needed to avoid scheduling of
packets from local real server when we add ip_vs_in
in LOCAL_OUT hook to support local client.

 	Currently, when ip_vs_in can not find existing
connection it tries to create new one by calling ip_vs_schedule.

 	The default indication from ip_vs_schedule was if
connection was scheduled to real server. If real server is
not available we try to use the bypass forwarding method
or to send ICMP error. But in some cases we do not want to use
the bypass feature. So, add flag 'ignored' to indicate if
the scheduler ignores this packet.

 	Make sure we do not create new connections from replies.
We can hit this problem for persistent services and local real
server when ip_vs_in is added to LOCAL_OUT hook to handle
local clients.

 	Also, make sure ip_vs_schedule ignores SYN packets
for Active FTP DATA from local real server. The FTP DATA
connection should be created on SYN+ACK from client to assign
correct connection daddr.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:41 +02:00
Julian Anastasov cf356d69db ipvs: switch to notrack mode
Change skb->ipvs_property semantic. This is preparation
to support ip_vs_out processing in LOCAL_OUT. ipvs_property=1
will be used to avoid expensive lookups for traffic sent by
transmitters. Now when conntrack support is not used we call
ip_vs_notrack method to avoid problems in OUTPUT and
POST_ROUTING hooks instead of exiting POST_ROUTING as before.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:20 +02:00
Julian Anastasov 8b27b10f58 ipvs: optimize checksums for apps
Avoid full checksum calculation for apps that can provide
info whether csum was broken after payload mangling. For now only
ip_vs_ftp mangles payload and it updates the csum, so the full
recalculation is avoided for all packets.

 	Add CHECKSUM_UNNECESSARY for snat_handler (TCP and UDP).
It is needed to support SNAT from local address for the case
when csum is fully recalculated.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21 10:50:02 +02:00
Hans Schillstrom 714f095f74 ipvs: IPv6 tunnel mode
IPv6 encapsulation uses a bad source address for the tunnel.
i.e. VIP will be used as local-addr and encap. dst addr.
Decapsulation will not accept this.

Example
LVS (eth1 2003::2:0:1/96, VIP 2003::2:0:100)
   (eth0 2003::1:0:1/96)
RS  (ethX 2003::1:0:5/96)

tcpdump
2003::2:0:100 > 2003::1:0:5: IP6 (hlim 63, next-header TCP (6) payload length: 40)  2003::3:0:10.50991 > 2003::2:0:100.http: Flags [S], cksum 0x7312 (correct), seq 3006460279, win 5760, options [mss 1440,sackOK,TS val 1904932 ecr 0,nop,wscale 3], length 0

In Linux IPv6 impl. you can't have a tunnel with an any cast address
receiving packets (I have not tried to interpret RFC 2473)
To have receive capabilities the tunnel must have:
 - Local address set as multicast addr or an unicast addr
 - Remote address set as an unicast addr.
 - Loop back addres or Link local address are not allowed.

This causes us to setup a tunnel in the Real Server with the
LVS as the remote address, here you can't use the VIP address since it's
used inside the tunnel.

Solution
Use outgoing interface IPv6 address (match against the destination).
i.e. use ip6_route_output() to look up the route cache and
then use ipv6_dev_get_saddr(...) to set the source address of the
encapsulated packet.

Additionally, cache the results in new destination
fields: dst_cookie and dst_saddr and properly check the
returned dst from ip6_route_output. We now add xfrm_lookup
call only for the tunneling method where the source address
is a local one.

Signed-off-by:Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-19 10:38:48 +02:00
Simon Horman 0d1e71b04a IPVS: Allow configuration of persistence engines
Allow the persistence engine of a virtual service to be set, edited
and unset.

This feature only works with the netlink user-space interface.

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04 22:45:24 +09:00
Simon Horman 8be67a6617 IPVS: management of persistence engine modules
This is based heavily on the scheduler management code

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04 22:45:24 +09:00
Simon Horman a3c918acd2 IPVS: Add persistence engine data to /proc/net/ip_vs_conn
This shouldn't break compatibility with userspace as the new data
is at the end of the line.

I have confirmed that this doesn't break ipvsadm, the main (only?)
user-space user of this data.

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04 22:45:24 +09:00
Simon Horman 85999283a2 IPVS: Add struct ip_vs_pe
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04 22:45:24 +09:00
Simon Horman f11017ec2d IPVS: Add struct ip_vs_conn_param
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04 22:45:24 +09:00
Julian Anastasov 8a8030407f ipvs: make rerouting optional with snat_reroute
Add new sysctl flag "snat_reroute". Recent kernels use
ip_route_me_harder() to route LVS-NAT responses properly by
VIP when there are multiple paths to client. But setups
that do not have alternative default routes can skip this
routing lookup by using snat_reroute=0.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-21 17:38:57 +02:00
Julian Anastasov f4bc17cdd2 ipvs: netfilter connection tracking changes
Add more code to IPVS to work with Netfilter connection
tracking and fix some problems.

- Allow IPVS to be compiled without connection tracking as in
2.6.35 and before. This can avoid keeping conntracks for all
IPVS connections because this costs memory. ip_vs_ftp still
depends on connection tracking and NAT as implemented for 2.6.36.

- Add sysctl var "conntrack" to enable connection tracking for
all IPVS connections. For loaded IPVS directors it needs
tuning of nf_conntrack_max limit.

- Add IP_VS_CONN_F_NFCT connection flag to request the connection
to use connection tracking. This allows user space to provide this
flag, for example, in dest->conn_flags. This can be useful to
request connection tracking per real server instead of forcing it
for all connections with the "conntrack" sysctl. This flag is
set currently only by ip_vs_ftp and of course by "conntrack" sysctl.

- Add ip_vs_nfct.c file to hold all connection tracking code,
by this way main code should not depend of netfilter conntrack
support.

- Return back the ip_vs_post_routing handler as in 2.6.35 and use
skb->ipvs_property=1 to allow IPVS to work without connection
tracking

Connection tracking:

- most of the code is already in 2.6.36-rc

- alter conntrack reply tuple for LVS-NAT connections when first packet
from client is forwarded and conntrack state is NEW or RELATED.
Additionally, alter reply for RELATED connections from real server,
again for packet in original direction.

- add IP_VS_XMIT_TUNNEL to confirm conntrack (without altering
reply) for LVS-TUN early because we want to call nf_reset. It is
needed because we add IPIP header and the original conntrack
should be preserved, not destroyed. The transmitted IPIP packets
can reuse same conntrack, so we do not set skb->ipvs_property.

- try to destroy conntrack when the IPVS connection is destroyed.
It is not fatal if conntrack disappears before that, it depends
on the used timers.

Fix problems from long time:

- add skb->ip_summed = CHECKSUM_NONE for the LVS-TUN transmitters

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-21 17:35:41 +02:00
Julian Anastasov 3575792e00 ipvs: extend connection flags to 32 bits
- the sync protocol supports 16 bits only, so bits 0..15 should be
used only for flags that should go to backup server, bits 16 and
above should be allocated for flags not sent to backup.

- use IP_VS_CONN_F_DEST_MASK as mask of connection flags in
destination that can be changed by user space

- allow IP_VS_CONN_F_ONE_PACKET to be set in destination

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-17 14:18:16 +02:00
Julian Anastasov 6523ce1525 ipvs: fix active FTP
- Do not create expectation when forwarding the PORT
  command to avoid blocking the connection. The problem is that
  nf_conntrack_ftp.c:help() tries to create the same expectation later in
  POST_ROUTING and drops the packet with "dropping packet" message after
  failure in nf_ct_expect_related.

- Change ip_vs_update_conntrack to alter the conntrack
  for related connections from real server. If we do not alter the reply in
  this direction the next packet from client sent to vport 20 comes as NEW
  connection. We alter it but may be some collision happens for both
  conntracks and the second conntrack gets destroyed immediately. The
  connection stucks too.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 10:39:57 -07:00
Simon Horman 5c0d2374a1 ipvs: provide default ip_vs_conn_{in,out}_get_proto
This removes duplicate code by providing a default implementation
which is used by 3 of the 4 modules that provide these call.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02 17:12:44 +02:00
Hannes Eder 7f1c407579 IPVS: make FTP work with full NAT support
Use nf_conntrack/nf_nat code to do the packet mangling and the TCP
sequence adjusting.  The function 'ip_vs_skb_replace' is now dead
code, so it is removed.

To SNAT FTP, use something like:

% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \
    --vport 21 -j SNAT --to-source 192.168.10.10
and for the data connections in passive mode:

% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \
    --vportctl 21 -j SNAT --to-source 192.168.10.10
using '-m state --state RELATED' would also works.

Make sure the kernel modules ip_vs_ftp, nf_conntrack_ftp, and
nf_nat_ftp are loaded.

[ up-port and minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23 12:48:52 +02:00
Venkata Mohan Reddy 2906f66a56 ipvs: SCTP Trasport Loadbalancing Support
Enhance IPVS to load balance SCTP transport protocol packets. This is done
based on the SCTP rfc 4960. All possible control chunks have been taken
care. The state machine used in this code looks some what lengthy. I tried
to make the state machine easy to understand.

Signed-off-by: Venkata Mohan Reddy Koppula <mohanreddykv@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-18 12:31:05 +01:00
Catalin(ux) M. BOIE 6f7edb4881 IPVS: Allow boot time change of hash size
I was very frustrated about the fact that I have to recompile the kernel
to change the hash size. So, I created this patch.

If IPVS is built-in you can append ip_vs.conn_tab_bits=?? to kernel
command line, or, if you built IPVS as modules, you can add
options ip_vs conn_tab_bits=??.

To keep everything backward compatible, you still can select the size at
compile time, and that will be used as default.

It has been about a year since this patch was originally posted
and subsequently dropped on the basis of insufficient test data.

Mark Bergsma has provided the following test results which seem
to strongly support the need for larger hash table sizes:

We do however run into the same problem with the default setting (212 =
4096 entries), as most of our LVS balancers handle around a million
connections/SLAB entries at any point in time (around 100-150 kpps
load). With only 4096 hash table entries this implies that each entry
consists of a linked list of 256 connections *on average*.

To provide some statistics, I did an oprofile run on an 2.6.31 kernel,
with both the default 4096 table size, and the same kernel recompiled
with IP_VS_CONN_TAB_BITS set to 18 (218 = 262144 entries). I built a
quick test setup with a part of Wikimedia/Wikipedia's live traffic
mirrored by the switch to the test host.

With the default setting, at ~ 120 kpps packet load we saw a typical %si
CPU usage of around 30-35%, and oprofile reported a hot spot in
ip_vs_conn_in_get:

samples  %        image name               app name
symbol name
1719761  42.3741  ip_vs.ko                 ip_vs.ko      ip_vs_conn_in_get
302577    7.4554  bnx2                     bnx2          /bnx2
181984    4.4840  vmlinux                  vmlinux       __ticket_spin_lock
128636    3.1695  vmlinux                  vmlinux       ip_route_input
74345     1.8318  ip_vs.ko                 ip_vs.ko      ip_vs_conn_out_get
68482     1.6874  vmlinux                  vmlinux       mwait_idle

After loading the recompiled kernel with 218 entries, %si CPU usage
dropped in half to around 12-18%, and oprofile looks much healthier,
with only 7% spent in ip_vs_conn_in_get:

samples  %        image name               app name
symbol name
265641   14.4616  bnx2                     bnx2         /bnx2
143251    7.7986  vmlinux                  vmlinux      __ticket_spin_lock
140661    7.6576  ip_vs.ko                 ip_vs.ko     ip_vs_conn_in_get
94364     5.1372  vmlinux                  vmlinux      mwait_idle
86267     4.6964  vmlinux                  vmlinux      ip_route_input

[ horms@verge.net.au: trivial up-port and minor style fixes ]
Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro>
Cc: Mark Bergsma <mark@wikimedia.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-05 05:50:24 +01:00
Eric Dumazet fd2c3ef761 net: cleanup include/net
This cleanup patch puts struct/union/enum opening braces,
in first line to ease grep games.

struct something
{

becomes :

struct something {

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:25 -08:00
Jan Engelhardt 36cbd3dcc1 net: mark read-only arrays as const
String literals are constant, and usually, we can also tag the array
of pointers const too, moving it to the .rodata section.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 10:42:58 -07:00
Hannes Eder 1e3e238e9c IPVS: use pr_err and friends instead of IP_VS_ERR and friends
Since pr_err and friends are used instead of printk there is no point
in keeping IP_VS_ERR and friends.  Furthermore make use of '__func__'
instead of hard coded function names.

Signed-off-by: Hannes Eder <heder@google.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02 18:29:30 -07:00
Hannes Eder 9aada7ac04 IPVS: use pr_fmt
While being at it cleanup whitespace.

Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30 14:29:44 -07:00
Harvey Harrison f3a7c66b5c net: replace __constant_{endian} uses in net headers
Base versions handle constant folding now.  For headers exposed to
userspace, we must only expose the __ prefixed versions.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14 22:58:35 -08:00
Joe Perches 07f0757a68 include/net net/ - csum_partial - remove unnecessary casts
The first argument to csum_partial is const void *
casts to char/u8 * are not necessary

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 15:44:53 -08:00
Julius Volz 48148938b4 IPVS: Remove supports_ipv6 scheduler flag
Remove the 'supports_ipv6' scheduler flag since all schedulers now
support IPv6.

Signed-off-by: Julius Volz <julius.volz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 17:08:56 -08:00
Harvey Harrison 3685f25de1 misc: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:49 -07:00
Harvey Harrison 5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison 0c6ce78abf net: replace uses of NIP6_FMT with %p6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 23:02:31 -07:00
Harvey Harrison d5c003b4d1 include: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:30 -07:00
KOVACS Krisztian 1668e010cb ipv4: Make inet_sock.h independent of route.h
inet_iif() in inet_sock.h requires route.h. Since users of inet_iif()
usually require other route.h functionality anyway this patch moves
inet_iif() to route.h.

Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01 07:33:10 -07:00
Sven Wegener e9c0ce232e ipvs: Embed user stats structure into kernel stats structure
Instead of duplicating the fields, integrate a user stats structure into
the kernel stats structure. This is more robust when the members are
changed, because they are now automatically kept in sync.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Reviewed-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-09 09:53:08 +10:00
Sven Wegener 2206a3f5b7 ipvs: Restrict connection table size via Kconfig
Instead of checking the value in include/net/ip_vs.h, we can just
restrict the range in our Kconfig file. This will prevent values outside
of the range early.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Reviewed-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-09 09:50:55 +10:00
Julius Volz cfc78c5a09 IPVS: Adjust various debug outputs to use new macros
Adjust various debug outputs to use the new *_BUF macro variants for
correct output of v4/v6 addresses.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:12 +10:00
Julius Volz 7937df1564 IPVS: Convert real server lookup functions
Convert functions for looking up destinations (real servers) to support
IPv6 services/dests.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:10 +10:00
Julius Volz b3cdd2a738 IPVS: Add and bind IPv6 xmit functions
Add xmit functions for IPv6. Also add the already needed __ip_vs_get_out_rt_v6()
to ip_vs_core.c. Bind the new xmit functions to v6 connections.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:08 +10:00
Julius Volz 28364a59f3 IPVS: Extend functions for getting/creating connections
Extend functions for getting/creating connections and connection
templates for IPv6 support and fix the callers.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:08 +10:00
Julius Volz 0bbdd42b7e IPVS: Extend protocol DNAT/SNAT and state handlers
Extend protocol DNAT/SNAT and state handlers to work with IPv6. Also
change/introduce new checksumming helper functions for this.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:07 +10:00
Julius Volz 51ef348b14 IPVS: Add 'af' args to protocol handler functions
Add 'af' arguments to conn_schedule(), conn_in_get(), conn_out_get() and
csum_check() function pointers in struct ip_vs_protocol. Extend the
respective functions for TCP, UDP, AH and ESP and adjust the callers.

The changes in the callers need to be somewhat extensive, since they now
need to pass a filled out struct ip_vs_iphdr * to the modified functions
instead of a struct iphdr *.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:06 +10:00
Julius Volz b14198f6c1 IPVS: Add IPv6 support flag to schedulers
Add 'supports_ipv6' flag to struct ip_vs_scheduler to indicate whether a
scheduler supports IPv6. Set the flag to 1 in schedulers that work with
IPv6, 0 otherwise. This flag is checked in a later patch while trying to
add a service with a specific scheduler. Adjust debug in v6-supporting
schedulers to work with both address families.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:06 +10:00
Julius Volz 3c2e0505d2 IPVS: Add v6 support to ip_vs_service_get()
Add support for selecting services based on their address family to
ip_vs_service_get() and adjust the callers.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:05 +10:00
Julius Volz c860c6b147 IPVS: Add internal versions of sockopt interface structs
Add extended internal versions of struct ip_vs_service_user and struct
ip_vs_dest_user (the originals can't be modified as they are part
of the old sockopt interface). Adjust ip_vs_ctl.c to work with the new
data structures and add some minor AF-awareness.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:04 +10:00
Julius Volz c842a3ada9 IPVS: Add debug macros for v4 and v6 address output
Add some debugging macros that allow conditional output of either v4 or v6
addresses, depending on an 'af' parameter. This is done by creating a
temporary string buffer in an outer debug macro and writing addresses'
string representations into it from another macro which can only be used
when inside the outer one.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:04 +10:00
Julius Volz 64aae3cb9f IPVS: Add general v4/v6 helper functions / data structures
Add a struct ip_vs_iphdr for easier handling of common v4 and v6 header
fields in the same code path. ip_vs_fill_iphdr() helps to fill this struct
from an IPv4 or IPv6 header. Add further helper functions for copying and
comparing addresses.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:03 +10:00
Julius Volz e7ade46a53 IPVS: Change IPVS data structures to support IPv6 addresses
Introduce new 'af' fields into IPVS data structures for specifying an
entry's address family. Convert IP addresses to be of type union
nf_inet_addr.

Signed-off-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05 11:17:03 +10:00
Sven Wegener a919cf4b6b ipvs: Create init functions for estimator code
Commit 8ab19ea36c ("ipvs: Fix possible deadlock
in estimator code") fixed a deadlock condition, but that condition can only
happen during unload of IPVS, because during normal operation there is at least
our global stats structure in the estimator list. The mod_timer() and
del_timer_sync() calls are actually initialization and cleanup code in
disguise. Let's make it explicit and move them to their own init and cleanup
function.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
2008-08-15 09:26:15 +10:00
Sven Wegener 3a14a313f9 ipvs: Embed estimator object into stats object
There's no reason for dynamically allocating an estimator object for every
stats object. Directly embed an estimator object into every stats object and
switch to using the kernel-provided list implementation. This makes the code
much simpler and faster, as we do not need to traverse the list of all
estimators to find the one belonging to a stats object. There's no need to use
an rwlock, as we only have one reader. Also reorder the members of the
estimator structure slightly to avoid padding overhead. This can't be done
with the stats object as the members are currently copied to our user space
object via memcpy() and changing it would break ABI.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11 14:00:43 +02:00
Sven Wegener 5587da55fb ipvs: Mark net_vs_ctl_path const
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11 11:46:27 +02:00
Sven Wegener afdd614071 ipvs: Use ARRAY_SIZE()
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11 11:45:48 +02:00
Julius Volz bc4768eb08 ipvs: Move userspace definitions to include/linux/ip_vs.h
Current versions of ipvsadm include "/usr/src/linux/include/net/ip_vs.h"
directly. This file also contains kernel-only definitions. Normally, public
definitions should live in include/linux, so this patch moves the
definitions shared with userspace to a new file, "include/linux/ip_vs.h".

This also removes the unused NFC_IPVS_PROPERTY bitmask, which was once
used to point into skb->nfcache.

To make old ipvsadms still compile with this, the old header file includes
the new one.

Thanks to Dave Miller and Horms for noting/adding the missing Kbuild entry
for the new header file.

Signed-off-by: Julius Volz <juliusv@google.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 20:45:24 -07:00