Commit Graph

64 Commits

Author SHA1 Message Date
Richard Zhu 9e54eae23b ahci_imx: add ahci sata support on imx platforms
imx6q contains one Synopsys AHCI SATA controller, But it can't share
ahci_platform driver with other controllers because there are some
misalignments of the generic AHCI controller - the bits definitions of
the HBA registers, the Vendor Specific registers, the AHCI PHY clock
and the AHCI signals adjustment window(GPR13 register).

 - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
   should be configured to be '1'

 - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
   should be set to be '1'.(default 0)

 - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
   configured regarding to the frequency of AHB bus clock.

 - Configurations of the AHCI PHY clock, and the signal parameters of
   the GPR13

Setup its own ahci sata driver, contained the imx6q specific
initialized codes, re-use the generic ahci_platform driver, and keep
the generic ahci_platform driver clean as much as possible.

tj: patch description reformatted

Signed-off-by: Richard Zhu <r65037@freescale.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-24 12:29:08 -04:00
Vladimir Barinov 163cf81d26 libata: add R-Car SATA driver
Add Renesas R-Car on-chip 3Gbps SATA controller driver.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
[Sergei: few bugs fixed, significant cleanup]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:10:53 -05:00
Aaron Lu afe7595118 libata: identify and init ZPODD devices
The ODD can be enabled for ZPODD if the following three conditions are
satisfied:
1 The ODD supports device attention;
2 The platform can runtime power off the ODD through ACPI;
3 The ODD is either slot type or drawer type.
For such ODDs, zpodd_init is called and a new structure is allocated for
it to store ZPODD related stuffs.

And the zpodd_dev_enabled function is used to test if ZPODD is currently
enabled for this ODD.

A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:40:35 -05:00
Mark Langsdorf 40dad0af2d [libata] Makefile: Fix build error in sata_highbank
Allow sata_highbank to build even if no other users of libahci.o are built.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-10-01 22:50:37 -04:00
Mark Langsdorf 8996b89d6b ata: add platform driver for Calxeda AHCI controller
Calxeda highbank SATA phy has intermittent problems bringing up a link
with Gen3 drives. Retrying the phy hard reset can work-around this issue,
but each reset also disables spread spectrum support. The reset function
also needs to reprogram the phy to enable spread spectrum support.

Create a new driver based on ahci_platform to support the Calxeda Highbank
SATA controller.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13 01:09:41 -04:00
Rafal Prylowski 2fff275126 PATA host controller driver for ep93xx
Add PATA host controller driver for ep93xx.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-22 16:02:34 -04:00
Bartlomiej Zolnierkiewicz 0dcd0a7637 libata: remove no longer needed pata_qdi driver
QDI65x0 controllers are fully supported by pata_legacy driver
so remove no longer needed pata_qdi driver.

Leave PATA_QDI config option for compatibility reasons and teach
pata_legacy to preserve the old behavior of pata_qdi driver.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:25:24 -04:00
Arnaud Patard (Rtp) e39c75cf3e ata: Add iMX pata support
Add basic support for pata on iMX. It has been tested only on imx51.
SDMA support will probably be added later so this version supports only
PIO.

v2:
  - enable only when needed IORDY
  - use dev_get_drvdata
v3:
  - add missing clk_put() calls
  - use platform_get_irq()
  - fix resume code to avoid disabling IORDY on resume
v4:
  - Remove EXPERIMENTAL and switch to depends on ARCH_MXC
  - Use devm_kzalloc()
  - make clock a must-have
  - Use only 1 ioremap

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:57:58 -04:00
Viresh Kumar a480167b23 pata_arasan_cf: Adding support for arasan compact flash host controller
The Arasan CompactFlash Device Controller has three basic modes of
operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card
ATA using true IDE modes.

Currently driver supports only True IDE mode.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14 02:52:46 -04:00
David Milburn 02cdfcf043 [libata] new driver acard_ahci, for ATP8620 host controller
Add support for Acard ATP8620 host controller.

Based upon initial version by Jeff Garzik.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-05 19:43:22 -05:00
Wolfram Sang 869934adfc pata_mpc52xx: driver needs BMDMA
Found by this build-error if BMDMA is disabled:

drivers/ata/pata_mpc52xx.c: In function 'mpc52xx_ata_init_one':
drivers/ata/pata_mpc52xx.c:662: error: 'ata_bmdma_interrupt' undeclared (first use in this function)
...

Move the Kconfig entry to the proper location as needed since
9a7780c9ac (libata-sff: make BMDMA optional)

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-12-24 13:33:37 -05:00
Tracey Dent 4b1be93411 Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y
Changed <module>-objs to <module>-y in Makefile.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21 21:17:32 -04:00
Gwendal Grignou d9027470b8 [libata] Add ATA transport class
This is a scheleton for libata transport class.
All information is read only, exporting information from libata:
- ata_port class: one per ATA port
- ata_link class: one per ATA port or 15 for SATA Port Multiplier
- ata_device class: up to 2 for PATA link, usually one for SATA.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21 20:21:03 -04:00
Bartlomiej Zolnierkiewicz 6d981b9a91 libata: remove no longer needed pata_winbond driver
Winbond W83759A controller is fully supported by pata_legacy driver
so remove no longer needed pata_winbond driver.

Leave PATA_WINBOND_VLB config option for compatibility reasons
and teach pata_legacy to preserve the old behavior of pata_winbond
driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25 19:24:15 -04:00
Russell King 0b019a4155 Merge branches 'master' and 'devel' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig
2010-08-10 23:17:52 +01:00
Abhilash Kesavan 155bf48f10 [libata] Add Samsung PATA controller driver, pata_samsung_cf
Adds support for the Samsung PATA controller. This driver is based
on the Libata subsystem and references the earlier patches sent for
IDE subsystem.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-01 19:36:03 -04:00
Rupjyoti Sarmah 62936009f3 [libata] Add 460EX on-chip SATA driver, sata_dwc_460ex
This patch enables the on-chip DWC SATA controller of the AppliedMicro
processor 460EX.

Signed-off-by: Rupjyoti Sarmah <rsarmah@appliedmicro.com>
Signed-off-by: Mark Miesfeld <mmiesfeld@appliedmicro.com>
Signed-off-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-01 19:36:03 -04:00
Marek Vasut 2dc6c6f15d [ARM] pata_pxa: DMA-capable PATA driver
This patch adds a driver for a harddrive attached to PXA address and data bus.
Unlike pata_platform, this driver allows usage of PXA DMA controller, making the
transmission speed 3x higher.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:32 +08:00
Tejun Heo 9a7780c9ac libata-sff: make BMDMA optional
Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA.
In Kconfig, drivers are grouped into five groups - non-SFF native, SFF
w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic
fallback / legacy ones.  Kconfig and Makefile are reorganized
according to the groups and ordered alphabetically inside each group.

ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into
CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and
functions.

This increase the binary size slightly when BMDMA is enabled but on
both native-only and PIO-only configurations the size is slightly
reduced.  Either way, the size difference is insignificant.  This
change is more meaningful to signify the separation between SFF and
BMDMA and as a tool to verify the separation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-25 19:41:12 -04:00
Anton Vorontsov 1c2a49f617 ahci: Add platform driver
This can be used for AHCI-compatible interfaces implemented inside
System-On-Chip solutions, or AHCI devices connected via localbus.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14 17:08:01 -04:00
Anton Vorontsov 365cfa1ed5 ahci: Move generic code into libahci
This patch should contain no functional changes, just moves code
around.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14 17:08:01 -04:00
Benjamin Herrenschmidt bcd6acd51f Merge commit 'origin/master' into next
Conflicts:
	include/linux/kvm.h
2009-12-09 17:14:38 +11:00
Benjamin Herrenschmidt 88358ab089 libata/drivers: Add driver for Apple "MacIO" IDE controller
This is a libata driver for the "macio" IDE controller used on most Apple
PowerMac and PowerBooks. It's a libata equivalent of drivers/ide/ppc/pmac.c

It supports all the features of its predecessor, including mediabay hotplug
and suspend/resume. It should also support module load/unload.

The timing calculations have been simplified to use pre-calculated tables
compared to drivers/ide/pmac.c and it uses the new mediabay interface
provided by a previous patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Tejun Heo <tj@kernel.org>
2009-12-09 17:09:28 +11:00
Alan Cox 8e182a90f9 pata_piccolo: Driver for old Toshiba chipsets
We were never able to get docs for this out of Toshiba for years. Dave
Barnes produced a NetBSD driver however and from that we can fill in the
needed tables.

As we correct the PCI identifiers a bit also update the old ide generic driver
at the same time so it stays compiling.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03 14:35:31 -05:00
John(Jung-Ik) Lee d15d6e6cc3 libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers
This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls.
Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes
from Eric Uhrhane <ericu@google.com>.

Signed-off-by: John(Jung-Ik) Lee <jilee@google.com>
Reviewed-by:  Grant Grundler <grundler@google.com>
Reviewed-by:  Gwendal Gringo <gwendal@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17 16:47:06 -04:00
Alan Cox 6b406782ad [libata] Add pata_rdc driver for RDC ATA devices
From: Alan Cox <alan@linux.intel.com>

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-01 19:47:20 -04:00
Sergey Matyukevich 918d7b7c33 [libata] PATA driver for CF interface on AT91SAM9260 SoC
This patch provides PATA driver for CompactFlash interface in True IDE
mode on AT91SAM9260 SoC.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-23 01:54:24 -04:00
Marek Vašut 5a9d25150c [ARM] 5522/1: PalmLD: IDE support
Support for Palm LifeDrive's internal harddrive.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 14:50:40 +01:00
David Daney 3c929c6f5a libata: New driver for OCTEON SOC Compact Flash interface (v7).
Cavium OCTEON processor support was recently merged, so now we have
this CF driver for your consideration.

Most OCTEON variants have *no* DMA or interrupt support on the CF
interface so for these, only PIO is supported.  Although if DMA is
available, we do take advantage of it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16 10:23:39 -05:00
Alek Du 07ab85de4d libata: Add Intel SCH PATA driver
This patch adds Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L)
PATA controller support.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06 11:33:58 -04:00
Ralf Baechle 3dd654bfdf [MIPS] ATA: Rename routerboard 500 to 532
The platform is actually named routerboard 532 so let's call it this.  This
patch only rename files, Kconfig and C symbols; no functional changes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29 02:16:25 -04:00
Tejun Heo 88fcd56275 libata: make PMP support optional
Make PMP support optional by adding CONFIG_SATA_PMP and leaving out
libata-pmp.c if it isn't set.  PMP helpers return constant values if
PMP support is not enabled and PMP declarations alias non-PMP
counterparts.  This makes the compiler to leave out PMP related part
out and LLDs to use non-PMP counterparts automatically.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-17 15:44:25 -04:00
Tejun Heo 127102aea2 libata: make SFF support optional
Now that SFF support is completely separated out from the core layer,
it can be made optional.  Add CONFIG_ATA_SFF and let SFF drivers
depend on it.  If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c
and data structures for SFF support are disabled.  This saves good
number of bytes for small systems.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-17 15:44:24 -04:00
Florian Fainelli 3db691daa4 [libata] Add support for the RB500 PATA CompactFlash
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10 20:54:05 -04:00
Paul Mackerras bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Alan Cox 51dbd49061 pata_ninja32: Cardbus ATA initial support
Lots of work needed to bring it up to scratch but it does work so you can
now use the card. That makes it at least useful, especially as the other
cardbus cards are usually INIC162x which aren't yet supported well.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-23 05:24:10 -05:00
Anton Vorontsov 61f7162117 libata: pata_of_platform: OF-Platform PATA device driver
This driver nicely wraps around pata_platform library functions,
and provides OF platform bus bindings to the PATA devices.

Also add || PPC to the PATA_PLATFORM's "depends on" Kconfig entry,
needed for PA Semi Electra.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-15 10:23:43 -06:00
Li Yang faf0b2e5af drivers/ata: add support to Freescale 3.0Gbps SATA Controller
This patch adds support for Freescale 3.0Gbps SATA Controller supporting
Native Command Queueing(NCQ), device hotplug, and ATAPI.  This controller
can be found on MPC8315 and MPC8378.

Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-17 20:49:02 -04:00
Martin K. Petersen 3957df6160 pata_cs5536: ATA driver for Geode companion chip
This is a driver for the ATA controller on the Geode CS5536 companion
chip.  The PCI device ID for this device was previously claimed by
pata_amd.c but the PIO timings were not correct.  This driver also
works around a bug in some BIOSes that handle unaligned access to the
PCI config registers poorly.  Finally, the driver allows fallback to
using MSR registers for configuration on BIOSes that are truly
broken.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 15:44:18 -04:00
Alan Cox 025621f9a7 pata_acpi: ACPI driver support
On a cable there may be
	eighty wires or perhaps forty
	and we learn about its type
	In the world of ACPI

	So we call the GTM
	And we find the the timing rate
	And we look through it to see
	If eighty wire it must be

	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines

	And the drivers last you see
	Picking up unknown pci ids
	and the code begins to work

	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines

	[Full speed ahead, Mr Hacker, full speed ahead]
	 Full speed over here sir!
	 Checking Cable, checking cable
	 Aye aye, 80 wire,
	 Heaven heaven]

	If we use ACPI (ACPI)
	Every box (every box) has all we need (has all we need)
	Cable type (cable type) and mode timing (mode timing)
	In our ATA (in our ATA) subroutines (subroutines, ha ha)

	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines
	Timing lives in ACPI routines
	ACPI routines, ACPI routines
	Timing lives in ACPI routines
	ACPI routes ACPI routines

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:46 -04:00
Tejun Heo 3af9a77af9 libata-pmp: implement Port Multiplier support
Implement Port Multiplier support.  To support PMP, a LLDD has to
supply ops->pmp_read() and pmp_write().  If non-null, ->pmp_attach and
->pmp_detach are called on PMP attach and detach, respectively.

->pmp_read/write() can be called while the port is frozen, so they
must be implemented by polling.  This patch supplies several helpers
to ease ->pmp_read/write() implementation.

Also, irq_handler and error_handler must be PMP aware.  Most of PMP
aware EH can be done by calling ata_pmp_do_eh() with appropriate
methods.  PMP EH uses separate set of reset methods and this patch
implements standard prereset, hardreset and postreset methods.

This patch only implements PMP support.  The next patch will integrate
PMP into the reset of libata and thus enable PMP support.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:44 -04:00
Alan Cox c4b5b7b6c4 pata_ns87415: Initial cut at 87415/87560 IDE support
Signed-off-by: Alan Cox <alan@redhat.com>
[plus SuperIO fixes by Kyle McMartin]
[plus a cleanup from me]
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:43 -04:00
Kristoffer Nyborg Gregertsen 7c9ef8e418 AVR32 PATA driver
Updated and simplified driver. Use only register transfer timing for both
data and register transfers. This gives poorer performance in PIO1 and 2,
but should not be a problem in PIO3 and 4, correct me if I'm wrong :)

The driver works very we'll but I still wonder about the interrupts. I have
an interrupt line, that works nicely when POLLING flag is not set. The
problem is the number of interrupts that eat away my CPU cycles.

When using the POLLING flag there seem to be some interrupts that dosen't get
cleared. Furthermore the device dosen't drive INTRQ high, it stays at 2.5 volts
and generates a lot of interrupts due to ripple / noise. What to do?

Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:37 -04:00
Sonic Zhang d830d1731f libata driver for bf548 on chip ATAPI controller.
Fix all issues pointed out in Jeff's email.

Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:37 -04:00
Tejun Heo e92351bb53 libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/
ACPI applies to both SATA and PATA.  Drop the 'S' from the config
variable.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 18:12:42 -04:00
Linus Torvalds c6799ade4a Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...
2007-05-06 13:20:10 -07:00
Russell King 73b6a2be8b [ARM] Add support for ICSIDE interface on RiscPC
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03 14:16:56 +01:00
Alan Cox b2248dac07 pata_cmd640: CMD640 PCI support
Support for the PCI CMD640 (not VLB)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:15:55 -04:00
Akira Iguchi a619f981b4 libata: PATA driver for Celleb
This is the patch for PATA controller of Celleb.

This driver uses the managed iomap (devres).

Because this driver needs special taskfile accesses, there is
a copy of ata_std_softreset(). ata_dev_try_classify() is exported
so that it can be used in this function.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21 04:58:16 -05:00
Kristen Carlson Accardi 11ef697b37 [PATCH] libata: ACPI and _GTF support
_GTF is an acpi method that is used to reinitialize the drive.  It returns
a task file containing ata commands that are sent back to the drive to restore
it to boot up defaults.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
(cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2007-02-16 13:32:41 -05:00