Commit Graph

54 Commits

Author SHA1 Message Date
Geert Uytterhoeven 415eb9fc0e vfio: platform: Fix using devices in PM Domains
If a device is part of a PM Domain (e.g. power and/or clock domain), its
power state is managed using Runtime PM.  Without Runtime PM, the device
may not be powered up or clocked, causing subtle failures, crashes, or
system lock-ups when the device is accessed by the guest.

Fix this by adding Runtime PM support, powering the device when the VFIO
device is opened by the guest.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08 10:24:37 -06:00
Geert Uytterhoeven d59502bc05 vfio: platform: Make printed error messages more consistent
- Capitalize the first word of error messages,
  - Unwrap statements that fit on a single line,
  - Use "VFIO" instead of "vfio" as the error message prefix.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08 10:24:23 -06:00
Geert Uytterhoeven 28a6838788 vfio: platform: Fix reset module leak in error path
If the IOMMU group setup fails, the reset module is not released.

Fixes: b5add544d6 ("vfio, platform: make reset driver a requirement by default")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08 10:24:20 -06:00
Linus Torvalds e0ca3826b1 VFIO Updates for Linux v4.15
* Virtualize PCI MPS and MRRS registers
 
  * Avoid soft lockups on SPAPR when clearing TCE
 
  * Broadcom FlexRM platform device support
 
  * Samples driver cleanup & type1 integer overflow fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJaCgl2AAoJECObm247sIsiT3kP/A7GsPfKMjKwkTFHUzlQ0/gj
 vCaMeQbfrSSmQE4c3dad5X53Y//FPlB9U+4y4eJiF+VwNYy8Emcue9SuMv8gp4WK
 HUONhRYcbfpL/qdYAcWRkdlS5In9fBsWJAauHSBbBW7jfCGmXiSVcHlEXscMfX1O
 VLs5aW9SHwabHmIgIVu3BL8rMXgm/nLeUHy5mjMq9SiBE1Wc69xkEn+gq4rn7Ibd
 JoIZymGpvQ5L4G4L9fZNAOKma9WQgXOvENfNbYqWxSJCm5/8Ke30tmZEljoIPsqE
 O/Twa/KBJ8Ah9FwLheSPmk0+qxq5VPfcprNb3ZlFYBUJl97EihSzEnw6KtiMgOZA
 GPEfzZOTip+lPShIhGfTuE/EwHcubYUXnFt6jLmjZHIFuMrYy/uDsIyNL6hgYjDl
 qJCiRzCyXvD8f2BvLqp7Ar1yd2khqYoLrxEshmxEt3ysDz4iqb3+RcHqVgmV9bP1
 xHip0SY+VrdZBEICCFas8rhS9fhE+8JuAAeMfvNHn30v7lHi3Wgp34tghy3nIikf
 /tb+1N4IRjo0TxTs1an/L1AaM+4J1D8qWvDE8NuiW+reY3oTtq0rmkIkD/HBZRhL
 zm8Y0+fNcfMAPVBd/amXWKuqKyxtKjqtIO5IQEpBB6fV+HThf1/UcguiI0x//ZfW
 TdP6GydKc1oiNsEv7217
 =86A4
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - Virtualize PCI MPS and MRRS registers

 - Avoid soft lockups on SPAPR when clearing TCE

 - Broadcom FlexRM platform device support

 - Samples driver cleanup & type1 integer overflow fix

* tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: platform: reset: Add Broadcom FlexRM reset module
  vfio/type1: silence integer overflow warning
  vfio-mdev/samples: make mdev_fops const and static
  vfio/spapr: Add cond_resched() for huge updates
  vfio/pci: Virtualize Maximum Read Request Size
  vfio/pci: Virtualize Maximum Payload Size
2017-11-14 16:47:47 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Anup Patel e25883411e vfio: platform: reset: Add Broadcom FlexRM reset module
This patch adds Broadcom FlexRM low-level reset for
VFIO platform.

It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring

The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Oza Oza <oza.oza@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-10-20 11:43:24 -06:00
Arvind Yadav 417fb50d55 vfio: platform: constify amba_id
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-08-30 14:03:42 -06:00
Kirti Wankhede a1e03e9bcc vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare()
Updated vfio_platform_common.c file to use
vfio_set_irqs_validate_and_prepare()

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Neo Jia <cjia@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-11-17 08:33:20 -07:00
Baoyou Xie 2e06285655 vfio: platform: mark symbols static where possible
We get a few warnings when building kernel with W=1:
drivers/vfio/platform/vfio_platform_common.c:76:5: warning: no previous prototype for 'vfio_platform_acpi_call_reset' [-Wmissing-prototypes]
drivers/vfio/platform/vfio_platform_common.c:98:6: warning: no previous prototype for 'vfio_platform_acpi_has_reset' [-Wmissing-prototypes]
drivers/vfio/platform/vfio_platform_common.c:640:5: warning: no previous prototype for 'vfio_platform_of_probe' [-Wmissing-prototypes]
drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:59:5: warning: no previous prototype for 'vfio_platform_amdxgbe_reset' [-Wmissing-prototypes]
drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c:60:5: warning: no previous prototype for 'vfio_platform_calxedaxgmac_reset' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-09-13 16:11:37 -06:00
Sinan Kaya 0991bbdbf5 vfio: platform: check reset call return code during release
Release call is ignoring the return code from reset call and can
potentially continue even though reset call failed.

If reset_required module parameter is set, this patch is going
to validate the return code and will cause stack dump with
WARN_ON and warn the user of failure.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:54:45 -06:00
Sinan Kaya e99442323f vfio: platform: check reset call return code during open
Open call is ignoring the return code from reset call and can
potentially continue even though reset call failed.

If reset_required module parameter is set, this patch is going
to validate the return code and will abort open if reset fails.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:54:45 -06:00
Sinan Kaya b5add544d6 vfio, platform: make reset driver a requirement by default
The code was allowing platform devices to be used without a supporting
VFIO reset driver. The hardware can be left in some inconsistent state
after a guest machine abort.

The reset driver will put the hardware back to safe state and disable
interrupts before returning the control back to the host machine.

Adding a new reset_required kernel module option to platform VFIO drivers.
The default value is true for the DT and ACPI based drivers.
The reset requirement value for AMBA drivers is set to false and is
unchangeable to maintain the existing functionality.

New requirements are:
1. A reset function needs to be implemented by the corresponding driver
via DT/ACPI.
2. The reset function needs to be discovered via DT/ACPI.

The probe of the driver will fail if any of the above conditions are
not satisfied.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:46 -06:00
Sinan Kaya d30daa33ec vfio: platform: call _RST method when using ACPI
The device tree code checks for the presence of a reset driver and calls
the of_reset function pointer by looking up the reset driver as a module.

ACPI defines _RST method to perform device level reset. After the _RST
method is executed, the OS can resume using the device. _RST method is
expected to stop DMA transfers and IRQs.

This patch introduces two functions as vfio_platform_acpi_has_reset and
vfio_platform_acpi_call_reset. The has reset method is used to declare
reset capability via the ioctl flag VFIO_DEVICE_FLAGS_RESET. The call
reset function is used to execute the _RST ACPI method.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:44 -06:00
Sinan Kaya 5afec27474 vfio: platform: add extra debug info argument to call reset
Getting ready to bring out extra debug information to the caller
so that more verbose information can be printed when an error is
observed.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:43 -06:00
Sinan Kaya a12a9368e1 vfio: platform: add support for ACPI probe
The code is using the compatible DT string to associate a reset driver
with the actual device itself. The compatible string does not exist on
ACPI based systems. HID is the unique identifier for a device driver
instead.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:41 -06:00
Sinan Kaya dc5542fb11 vfio: platform: determine reset capability
Creating a new function to determine if this driver supports reset
function or not. This is an attempt to abstract device tree calls
from the rest of the code.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:40 -06:00
Sinan Kaya f084aa7495 vfio: platform: move reset call to a common function
The reset call sequence seems to replicate itself multiple times
across the file. Grouping them together for maintenance reasons.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:38 -06:00
Sinan Kaya 7aef80cf31 vfio: platform: rename reset function
Renaming the reset function to of_reset as it is only used
by the device tree based platforms.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-07-19 10:26:36 -06:00
Peng Fan 9698cbf0be vfio: platform: support No-IOMMU mode
The vfio No-IOMMU mode was supported by this
'commit 03a76b60f8 ("vfio: Include No-IOMMU mode")',
but it only support vfio-pci.

Using vfio_iommu_group_get/put, but not iommu_group_get/put,
the platform devices can be exposed to userspace with
CONFIG_VFIO_NOIOMMU and the "enable_unsafe_noiommu_mode"
option enabled.

From 'commit 03a76b60f8 ("vfio: Include No-IOMMU mode")',
"This should make it very clear that this mode is not safe.
Additionally, CAP_SYS_RAWIO privileges are necessary to work
with groups and containers using this mode.  Groups making
use of this support are named /dev/vfio/noiommu-$GROUP and
can only make use of the special VFIO_NOIOMMU_IOMMU for the
container.  Use of this mode, specifically binding a device
without a native IOMMU group to a VFIO bus driver will taint
the kernel and should therefore not be considered supported."

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Eric Auger <eric.auger@linaro.org>
Cc: Baptiste Reynal <b.reynal@virtualopensystems.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-06-23 09:37:17 -06:00
Michael S. Tsirkin 8160c4e455 vfio: fix ioctl error handling
Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.

Fix up vfio to do
	return copy_to_user(...)) ?
		-EFAULT : 0;

everywhere.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-28 07:38:52 -07:00
Dan Carpenter 967628827f VFIO: platform: reset: fix a warning message condition
This loop ends with count set to -1 and not zero so the warning message
isn't printed when it should be.  I've fixed this by change the postop
to a preop.

Fixes: 0990822c98 ('VFIO: platform: reset: AMD xgbe reset module')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-12-21 15:28:11 -07:00
Kees Cook 7200be7c81 vfio: platform: remove needless stack usage
request_module already takes format strings, so no need to duplicate
the effort.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-20 09:00:10 -07:00
Krzysztof Kozlowski 7fe9414223 vfio: Drop owner assignment from platform_driver
platform_driver does not need to set an owner because
platform_driver_register() will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-19 15:52:08 -07:00
Eric Auger 0990822c98 VFIO: platform: reset: AMD xgbe reset module
This patch introduces a module that registers and implements a low-level
reset function for the AMD XGBE device.

it performs the following actions:
- reset the PHY
- disable auto-negotiation
- disable & clear auto-negotiation IRQ
- soft-reset the MAC

Those tiny pieces of code are inherited from the native xgbe driver.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:55:21 -07:00
Eric Auger daac3bbedb vfio: platform: reset: calxedaxgmac: fix ioaddr leak
In the current code the vfio_platform_region is copied on the stack.
As a consequence the ioaddr address is not iounmapped in the vfio
platform driver (vfio_platform_regions_cleanup). The patch uses the
pointer to the region instead.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:55:06 -07:00
Eric Auger 705e60bae3 vfio: platform: add dev_info on device reset
It might be helpful for the end-user to check the device reset
function was found by the vfio platform reset framework.

Lets store a pointer to the struct device in vfio_platform_device
and trace when the reset function is called or not found.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:55:05 -07:00
Eric Auger e9e0506ee6 vfio: platform: use list of registered reset function
Remove the static lookup table and use the dynamic list of registered
reset functions instead. Also load the reset module through its alias.
The reset struct module pointer is stored in vfio_platform_device.

We also remove the useless struct device pointer parameter in
vfio_platform_get_reset.

This patch fixes the issue related to the usage of __symbol_get, which
besides from being moot, prevented compilation with CONFIG_MODULES
disabled.

Also usage of MODULE_ALIAS makes possible to add a new reset module
without needing to update the framework. This was suggested by Arnd.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:55:03 -07:00
Eric Auger 0628c4dfd3 vfio: platform: add compat in vfio_platform_device
Let's retrieve the compatibility string on probe and store it
in the vfio_platform_device struct

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:55:02 -07:00
Eric Auger 680742f644 vfio: platform: reset: calxedaxgmac: add reset function registration
This patch adds the reset function registration/unregistration.
This is handled through the module_vfio_reset_handler macro. This
latter also defines a MODULE_ALIAS which simplifies the load from
vfio-platform.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:55:00 -07:00
Eric Auger 588646529f vfio: platform: introduce module_vfio_reset_handler macro
The module_vfio_reset_handler macro
- define a module alias
- implement module init/exit function which respectively registers
  and unregisters the reset function.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:54:59 -07:00
Eric Auger e086497d31 vfio: platform: add capability to register a reset function
In preparation for subsequent changes in reset function lookup,
lets introduce a dynamic list of reset combos (compat string,
reset module, reset function). The list can be populated/voided with
vfio_platform_register/unregister_reset. Those are not yet used in
this patch.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:54:57 -07:00
Eric Auger 32a2d71c4e vfio: platform: introduce vfio-platform-base module
To prepare for vfio platform reset rework let's build
vfio_platform_common.c and vfio_platform_irq.c in a separate
module from vfio-platform and vfio-amba. This makes possible
to have separate module inits and works around a race between
platform driver init and vfio reset module init: that way we
make sure symbols exported by base are available when vfio-platform
driver gets probed.

The open/release being implemented in the base module, the ref
count is applied to the parent module instead.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:54:56 -07:00
James Morse 1b4bb2eaa9 vfio/platform: store mapped memory in region, instead of an on-stack copy
vfio_platform_{read,write}_mmio() call ioremap_nocache() to map
a region of io memory, which they store in struct vfio_platform_region to
be eventually re-used, or unmapped by vfio_platform_regions_cleanup().

These functions receive a copy of their struct vfio_platform_region
argument on the stack - so these mapped areas are always allocated, and
always leaked.

Pass this argument as a pointer instead.

Fixes: 6e3f264560 "vfio/platform: read and write support for the device fd"
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03 12:54:00 -07:00
Eric Auger 1276ece32c VFIO: platform: clear IRQ_NOAUTOEN when de-assigning the IRQ
The vfio platform driver currently sets the IRQ_NOAUTOEN before
doing the request_irq to properly handle the user masking. However
it does not clear it when de-assigning the IRQ. This brings issues
when loading the native driver again which may not explicitly enable
the IRQ. This problem was observed with xgbe driver.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-27 15:02:53 -06:00
Eric Auger e6bcd47f8f VFIO: platform: enable ARM64 build
This patch enables building VFIO platform and derivatives on ARM64.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:47 -06:00
Eric Auger 713cc334a6 VFIO: platform: Calxeda xgmac reset module
This patch introduces a module that registers and implements a basic
reset function for the Calxeda xgmac device. This latter basically disables
interrupts and stops DMA transfers.

The reset function code is inherited from the native calxeda xgmac driver.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:38 -06:00
Eric Auger 3eeb0d510c VFIO: platform: populate the reset function on probe
The reset function lookup happens on vfio-platform probe. The reset
module load is requested  and a reference to the function symbol is
hold. The reference is released on vfio-platform remove.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:30 -06:00
Eric Auger 813ae66008 VFIO: platform: add reset callback
A new reset callback is introduced. If this callback is populated,
the reset is invoked on device first open/last close or upon userspace
ioctl.  The modality is exposed on VFIO_DEVICE_GET_INFO.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:22 -06:00
Eric Auger 9f85d8f9fa VFIO: platform: add reset struct and lookup table
This patch introduces the vfio_platform_reset_combo struct that
stores all the information useful to handle the reset modality:
compat string, name of the reset function, name of the module that
implements the reset function. A lookup table of such structures
is added, currently void.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-17 15:39:09 -06:00
Alex Williamson 71be3423a6 vfio: Split virqfd into a separate module for vfio bus drivers
An unintended consequence of commit 42ac9bd18d ("vfio: initialize
the virqfd workqueue in VFIO generic code") is that the vfio module
is renamed to vfio_core so that it can include both vfio and virqfd.
That's a user visible change that may break module loading scritps
and it imposes eventfd support as a dependency on the core vfio code,
which it's really not.  virqfd is intended to be provided as a service
to vfio bus drivers, so instead of wrapping it into vfio.ko, we can
make it a stand-alone module toggled by vfio bus drivers.  This has
the additional benefit of removing initialization and exit from the
core vfio code.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17 08:33:38 -06:00
Antonios Motakis a7fa7c77cf vfio/platform: implement IRQ masking/unmasking via an eventfd
With this patch the VFIO user will be able to set an eventfd that can be
used in order to mask and unmask IRQs of platform devices.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:55 -06:00
Antonios Motakis 06211b40ce vfio/platform: support for level sensitive interrupts
Level sensitive interrupts are exposed as maskable and automasked
interrupts and are masked and disabled automatically when they fire.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: Move masked interrupt initialization from "vfio/platform:
trigger an interrupt via eventfd"]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:50 -06:00
Antonios Motakis 57f972e2b3 vfio/platform: trigger an interrupt via eventfd
This patch allows to set an eventfd for a platform device's interrupt,
and also to trigger the interrupt eventfd from userspace for testing.
Level sensitive interrupts are marked as maskable and are handled in
a later patch. Edge triggered interrupts are not advertised as maskable
and are implemented here using a simple and efficient IRQ handler.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: fix masked interrupt initialization]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:50 -06:00
Antonios Motakis 9a36321c8d vfio/platform: initial interrupts support code
This patch is a skeleton for the VFIO_DEVICE_SET_IRQS IOCTL, around which
most IRQ functionality is implemented in VFIO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:49 -06:00
Antonios Motakis 682704c41e vfio/platform: return IRQ info
Return information for the interrupts exposed by the device.
This patch extends VFIO_DEVICE_GET_INFO with the number of IRQs
and enables VFIO_DEVICE_GET_IRQ_INFO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:48 -06:00
Antonios Motakis fad4d5b1f0 vfio/platform: support MMAP of MMIO regions
Allow to memory map the MMIO regions of the device so userspace can
directly access them. PIO regions are not being handled at this point.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:48 -06:00
Antonios Motakis 6e3f264560 vfio/platform: read and write support for the device fd
VFIO returns a file descriptor which we can use to manipulate the memory
regions of the device. Usually, the user will mmap memory regions that are
addressable on page boundaries, however for memory regions where this is
not the case we cannot provide mmap functionality due to security concerns.
For this reason we also allow to use read and write functions to the file
descriptor pointing to the memory regions.

We implement this functionality only for MMIO regions of platform devices;
PIO regions are not being handled at this point.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:47 -06:00
Antonios Motakis e8909e67ca vfio/platform: return info for device memory mapped IO regions
This patch enables the IOCTLs VFIO_DEVICE_GET_REGION_INFO ioctl call,
which allows the user to learn about the available MMIO resources of
a device.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:46 -06:00
Antonios Motakis 2e8567bbb5 vfio/platform: return info for bound device
A VFIO userspace driver will start by opening the VFIO device
that corresponds to an IOMMU group, and will use the ioctl interface
to get the basic device info, such as number of memory regions and
interrupts, and their properties. This patch enables the
VFIO_DEVICE_GET_INFO ioctl call.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: added include in vfio_platform_common.c]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:46 -06:00
Antonios Motakis b13329adc2 vfio: amba: add the VFIO for AMBA devices module to Kconfig
Enable building the VFIO AMBA driver. VFIO_AMBA depends on VFIO_PLATFORM,
since it is sharing a portion of the code, and it is essentially implemented
as a platform device whose resources are discovered via AMBA specific APIs
in the kernel.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:45 -06:00