Commit Graph

93 Commits

Author SHA1 Message Date
Joe Perches 40685236b3 x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt)
- Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 - Stripped PERCPU: from a pr_warning

Signed-off-by: Joe Perches <joe@perches.com>
LKML-Reference: <7ead24eccbea8f2b11795abad3e2893a98e1e111.1260383912.git.joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-10 08:57:50 +01:00
Tejun Heo 4518e6a0c0 x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
Embedding percpu first chunk allocator can now handle very sparse unit
mapping.  Use embedding allocator instead of lpage for 64bit NUMA.
This removes extra TLB pressure and the need to do complex and fragile
dancing when changing page attributes.

For 32bit, using very sparse unit mapping isn't a good idea because
the vmalloc space is very constrained.  32bit NUMA machines aren't
exactly the focus of optimization and it isn't very clear whether
lpage performs better than page.  Use page first chunk allocator for
32bit NUMAs.

As this leaves setup_pcpu_*() functions pretty much empty, fold them
into setup_per_cpu_areas().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
2009-08-14 15:00:52 +09:00
Tejun Heo c8826dd538 percpu: update embedding first chunk allocator to handle sparse units
Now that percpu core can handle very sparse units, given that vmalloc
space is large enough, embedding first chunk allocator can use any
memory to build the first chunk.  This patch teaches
pcpu_embed_first_chunk() about distances between cpus and to use
alloc/free callbacks to allocate node specific areas for each group
and use them for the first chunk.

This brings the benefits of embedding allocator to NUMA configurations
- no extra TLB pressure with the flexibility of unified dynamic
allocator and no need to restructure arch code to build memory layout
suitable for percpu.  With units put into atom_size aligned groups
according to cpu distances, using large page for dynamic chunks is
also easily possible with falling back to reuglar pages if large
allocation fails.

Embedding allocator users are converted to specify NULL
cpu_distance_fn, so this patch doesn't cause any visible behavior
difference.  Following patches will convert them.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:52 +09:00
Tejun Heo fb435d5233 percpu: add pcpu_unit_offsets[]
Currently units are mapped sequentially into address space.  This
patch adds pcpu_unit_offsets[] which allows units to be mapped to
arbitrary offsets from the chunk base address.  This is necessary to
allow sparse embedding which might would need to allocate address
ranges and memory areas which aren't aligned to unit size but
allocation atom size (page or large page size).  This also simplifies
things a bit by removing the need to calculate offset from unit
number.

With this change, there's no need for the arch code to know
pcpu_unit_size.  Update pcpu_setup_first_chunk() and first chunk
allocators to return regular 0 or -errno return code instead of unit
size or -errno.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
2009-08-14 15:00:51 +09:00
Tejun Heo fd1e8a1fe2 percpu: introduce pcpu_alloc_info and pcpu_group_info
Till now, non-linear cpu->unit map was expressed using an integer
array which maps each cpu to a unit and used only by lpage allocator.
Although how many units have been placed in a single contiguos area
(group) is known while building unit_map, the information is lost when
the result is recorded into the unit_map array.  For lpage allocator,
as all allocations are done by lpages and whether two adjacent lpages
are in the same group or not is irrelevant, this didn't cause any
problem.  Non-linear cpu->unit mapping will be used for sparse
embedding and this grouping information is necessary for that.

This patch introduces pcpu_alloc_info which contains all the
information necessary for initializing percpu allocator.
pcpu_alloc_info contains array of pcpu_group_info which describes how
units are grouped and mapped to cpus.  pcpu_group_info also has
base_offset field to specify its offset from the chunk's base address.
pcpu_build_alloc_info() initializes this field as if all groups are
allocated back-to-back as is currently done but this will be used to
sparsely place groups.

pcpu_alloc_info is a rather complex data structure which contains a
flexible array which in turn points to nested cpu_map arrays.

* pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to
  help dealing with pcpu_alloc_info.

* pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info,
  generalized and renamed to pcpu_build_alloc_info().
  @cpu_distance_fn may be NULL indicating that all cpus are of
  LOCAL_DISTANCE.

* pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info,
  generalized and renamed to pcpu_dump_alloc_info().  It now also
  prints which group each alloc unit belongs to.

* pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the
  separate parameters.  All first chunk allocators are updated to use
  pcpu_build_alloc_info() to build alloc_info and call
  pcpu_setup_first_chunk() with it.  This has the side effect of
  packing units for sparse possible cpus.  ie. if cpus 0, 2 and 4 are
  possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4.

* x86 setup_pcpu_lpage() is updated to deal with alloc_info.

* sparc64 setup_per_cpu_areas() is updated to build alloc_info.

Although the changes made by this patch are pretty pervasive, it
doesn't cause any behavior difference other than packing of sparse
cpus.  It mostly changes how information is passed among
initialization functions and makes room for more flexibility.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
2009-08-14 15:00:51 +09:00
Tejun Heo 3cbc856527 percpu: add @align to pcpu_fc_alloc_fn_t
pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align
parameter.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo 9a7737691e percpu: drop @static_size from first chunk allocators
First chunk allocators assume percpu areas have been linked using one
of PERCPU_*() macros and depend on __per_cpu_load symbol defined by
those macros, so there isn't much point in passing in static area size
explicitly when it can be easily calculated from __per_cpu_start and
__per_cpu_end.  Drop @static_size from all percpu first chunk
allocators and helpers.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo f58dc01ba2 percpu: generalize first chunk allocator selection
Now that all first chunk allocators are in mm/percpu.c, it makes sense
to make generalize percpu_alloc kernel parameter.  Define PCPU_FC_*
and set pcpu_chosen_fc using early_param() in mm/percpu.c.  Arch code
can use the set value to determine which first chunk allocator to use.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo 00ae4064b1 percpu: rename 4k first chunk allocator to page
Page size isn't always 4k depending on arch and configuration.  Rename
4k first chunk allocator to page.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Howells <dhowells@redhat.com>
2009-08-14 15:00:49 +09:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Tejun Heo 74d46d6b2d percpu, sparc64: fix sparse possible cpu map handling
percpu code has been assuming num_possible_cpus() == nr_cpu_ids which
is incorrect if cpu_possible_map contains holes.  This causes percpu
code to access beyond allocated memories and vmalloc areas.  On a
sparc64 machine with cpus 0 and 2 (u60), this triggers the following
warning or fails boot.

 WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240()
 Modules linked in:
 Call Trace:
  [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240
  [00000000004b1840] map_vm_area+0x20/0x60
  [00000000004b1950] __vmalloc_area_node+0xd0/0x160
  [0000000000593434] deflate_init+0x14/0xe0
  [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0
  [00000000005844f0] crypto_alloc_base+0x50/0xa0
  [000000000058b898] alg_test_comp+0x18/0x80
  [000000000058dad4] alg_test+0x54/0x180
  [000000000058af00] cryptomgr_test+0x40/0x60
  [0000000000473098] kthread+0x58/0x80
  [000000000042b590] kernel_thread+0x30/0x60
  [0000000000472fd0] kthreadd+0xf0/0x160
 ---[ end trace 429b268a213317ba ]---

This patch fixes generic percpu functions and sparc64
setup_per_cpu_areas() so that they handle sparse cpu_possible_map
properly.

Please note that on x86, cpu_possible_map() doesn't contain holes and
thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause
any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
2009-08-14 13:20:53 +09:00
Tejun Heo a530b79586 percpu: teach large page allocator about NUMA
Large page first chunk allocator is primarily used for NUMA machines;
however, its NUMA handling is extremely simplistic.  Regardless of
their proximity, each cpu is put into separate large page just to
return most of the allocated space back wasting large amount of
vmalloc space and increasing cache footprint.

This patch teachs NUMA details to large page allocator.  Given
processor proximity information, pcpu_lpage_build_unit_map() will find
fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the
same large page and not too much virtual address space is wasted.

This greatly reduces the unit and thus chunk size and wastes much less
address space for the first chunk.  For example, on 4/4 NUMA machine,
the original code occupied 16MB of virtual space for the first chunk
while the new code only uses 4MB - one 2MB page for each node.

[ Impact: much better space efficiency on NUMA machines ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
2009-07-04 08:11:00 +09:00
Tejun Heo 8c4bfc6e88 x86,percpu: generalize lpage first chunk allocator
Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk().  setup_pcpu_lpage() now is a simple wrapper
around the generalized version.  Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-04 08:10:59 +09:00
Tejun Heo d4b95f8039 x86,percpu: generalize 4k first chunk allocator
Generalize and move x86 setup_pcpu_4k() into pcpu_4k_first_chunk().
setup_pcpu_4k() now is a simple wrapper around the generalized
version.  Other than taking size parameters and using arch supplied
callbacks to allocate/free memory, pcpu_4k_first_chunk() is identical
to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, s/pcpu_populate_pte_fn_t/pcpu_fc_populate_pte_fn_t/ for
consistency.

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-04 08:10:59 +09:00
Tejun Heo 788e5abc54 percpu: drop @unit_size from embed first chunk allocator
The only extra feature @unit_size provides is making dead space at the
end of the first chunk which doesn't have any valid usecase.  Drop the
parameter.  This will increase consistency with generalized 4k
allocator.

James Bottomley spotted missing conversion for the default
setup_per_cpu_areas() which caused build breakage on all arcsh which
use it.

[ Impact: drop unused code path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-04 08:10:58 +09:00
Tejun Heo 0017c869dd x86: ensure percpu lpage doesn't consume too much vmalloc space
On extreme configuration (e.g. 32bit 32-way NUMA machine), lpage
percpu first chunk allocator can consume too much of vmalloc space.
Make it fall back to 4k allocator if the consumption goes over 20%.

[ Impact: add sanity check for lpage percpu first chunk allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-22 11:56:24 +09:00
Tejun Heo fa8a7094ba x86: implement percpu_alloc kernel parameter
According to Andi, it isn't clear whether lpage allocator is worth the
trouble as there are many processors where PMD TLB is far scarcer than
PTE TLB.  The advantage or disadvantage probably depends on the actual
size of percpu area and specific processor.  As performance
degradation due to TLB pressure tends to be highly workload specific
and subtle, it is difficult to decide which way to go without more
data.

This patch implements percpu_alloc kernel parameter to allow selecting
which first chunk allocator to use to ease debugging and testing.

While at it, make sure all the failure paths report why something
failed to help determining why certain allocator isn't working.  Also,
kill the "Great future plan" comment which had already been realized
quite some time ago.

[ Impact: allow explicit percpu first chunk allocator selection ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-22 11:56:24 +09:00
Tejun Heo e59a1bb2fd x86: fix pageattr handling for lpage percpu allocator and re-enable it
lpage allocator aliases a PMD page for each cpu and returns whatever
is unused to the page allocator.  When the pageattr of the recycled
pages are changed, this makes the two aliases point to the overlapping
regions with different attributes which isn't allowed and known to
cause subtle data corruption in certain cases.

This can be handled in simliar manner to the x86_64 highmap alias.
pageattr code should detect if the target pages have PMD alias and
split the PMD alias and synchronize the attributes.

pcpur allocator is updated to keep the allocated PMD pages map sorted
in ascending address order and provide pcpu_lpage_remapped() function
which binary searches the array to determine whether the given address
is aliased and if so to which address.  pageattr is updated to use
pcpu_lpage_remapped() to detect the PMD alias and split it up as
necessary from cpa_process_alias().

Jan Beulich spotted the original problem and incorrect usage of vaddr
instead of laddr for lookup.

With this, lpage percpu allocator should work correctly.  Re-enable
it.

[ Impact: fix subtle lpage pageattr bug and re-enable lpage ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-22 11:56:24 +09:00
Tejun Heo 0ff2587fd5 x86: prepare setup_pcpu_lpage() for pageattr fix
Make the following changes in preparation of coming pageattr updates.

* Define and use array of struct pcpul_ent instead of array of
  pointers.  The only difference is ->cpu field which is set but
  unused yet.

* Rename variables according to the above change.

* Rename local variable vm to pcpul_vm and move it out of the
  function.

[ Impact: no functional difference ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-22 11:56:24 +09:00
Tejun Heo 97c9bf0618 x86: rename remap percpu first chunk allocator to lpage
The "remap" allocator remaps large pages to build the first chunk;
however, the name isn't very good because 4k allocator remaps too and
the whole point of the remap allocator is using large page mapping.
The allocator will be generalized and exported outside of x86, rename
it to lpage before that happens.

percpu_alloc kernel parameter is updated to accept both "remap" and
"lpage" for lpage allocator.

[ Impact: code cleanup, kernel parameter argument updated ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-22 11:56:24 +09:00
Tejun Heo c5806df923 x86: fix duplicate free in setup_pcpu_remap() failure path
In the failure path, setup_pcpu_remap() tries to free the area which
has already been freed to make holes in the large page.  Fix it.

[ Impact: fix duplicate free in failure path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-22 11:56:24 +09:00
Linus Torvalds bb7762961d Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  x86: fix system without memory on node0
  x86, mm: Fix node_possible_map logic
  mm, x86: remove MEMORY_HOTPLUG_RESERVE related code
  x86: make sparse mem work in non-NUMA mode
  x86: process.c, remove useless headers
  x86: merge process.c a bit
  x86: use sparse_memory_present_with_active_regions() on UMA
  x86: unify 64-bit UMA and NUMA paging_init()
  x86: Allow 1MB of slack between the e820 map and SRAT, not 4GB
  x86: Sanity check the e820 against the SRAT table using e820 map only
  x86: clean up and and print out initial max_pfn_mapped
  x86/pci: remove rounding quirk from e820_setup_gap()
  x86, e820, pci: reserve extra free space near end of RAM
  x86: fix typo in address space documentation
  x86: 46 bit physical address support on 64 bits
  x86, mm: fault.c, use printk_once() in is_errata93()
  x86: move per-cpu mmu_gathers to mm/init.c
  x86: move max_pfn_mapped and max_low_pfn_mapped to setup.c
  x86: unify noexec handling
  x86: remove (null) in /sys kernel_page_tables
  ...
2009-06-10 16:13:20 -07:00
Tejun Heo 71c9d8b68b x86: Remove remap percpu allocator for the time being
Remap percpu allocator has subtle bug when combined with page
attribute changing.  Remap percpu allocator aliases PMD pages for the
first chunk and as pageattr doesn't know about the alias it ends up
updating page attributes of the original mapping thus leaving the
alises in inconsistent state which might lead to subtle data
corruption.  Please read the following threads for more information:

  http://thread.gmane.org/gmane.linux.kernel/835783

The following is the proposed fix which teaches pageattr about percpu
aliases.

  http://thread.gmane.org/gmane.linux.kernel/837157

However, the above changes are deemed too pervasive for upstream
inclusion for 2.6.30 release, so this patch essentially disables
the remap allocator for the time being.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4A1A0A27.4050301@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 05:37:55 +02:00
Yinghai Lu 35d5a9a614 x86: fix system without memory on node0
Jack found a boot crash on a system which doesn't have memory on node0.

It turns out with recent per_cpu changes, node_number for BSP will always
be 0, and it is not consistent to cpu_to_node() that might set it to a
different (nearer) node already.

aka when numa_set_node() for node0 is called early before per_cpu area is
setup:

two places touched that per_cpu(node_number,):

1. in cpu/common.c::cpu_init() and it is not for BP
| #ifdef CONFIG_NUMA
|        if (cpu != 0 && percpu_read(node_number) == 0 &&
|            cpu_to_node(cpu) != NUMA_NO_NODE)
|                percpu_write(node_number, cpu_to_node(cpu));
| #endif
for BP: traps_init ==> cpu_init
for AP: start_secondary ==> cpu_init

2. cpu/intel.c or amd.c::srat_detect_node via numa_set_node()
for BP: check_bugs ==> identify_boot_cpu ==> identify_cpu()
	 that is rather later before numa_node_id() is used for BP...
for AP: start_secondary => smp_callin => smp_store_cpu_info() =>
	=> identify_secondary_cpu => identify_cpu()

so try to set that for BP earlier in setup_per_cpu_areas(), and
don't bother to set that for APs there (it will be updated later
and will be used later)

(and don't mess the 0 before the copying BP per_cpu data to APs)

[ Impact: fix boot crash on memoryless node-0 ]

Reported-and-tested-by: Jack Steiner <steiner@sgi.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4A0C4A02.7050401@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 09:27:09 +02:00
Yinghai Lu 3de46fda4c x86: remove duplicated code with pcpu_need_numa()
Impact: clean up

those code pcpu_need_numa(), should be removed.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: David Miller <davem@davemloft.net>
LKML-Reference: <49D31770.9090502@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 06:08:05 +02:00
Tejun Heo eb12ce60c8 x86,percpu: fix inverted NUMA test in setup_pcpu_remap()
setup_percpu_remap() is for NUMA machines yet it bailed out with
-EINVAL if pcpu_need_numa().  Fix the inverted condition.

This problem was reported by David Miller and verified by Yinhai Lu.

Reported-by: David Miller <davem@davemloft.net>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <49D30469.8020006@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 06:08:05 +02:00
Tejun Heo 66c3a75772 percpu: generalize embedding first chunk setup helper
Impact: code reorganization

Separate out embedding first chunk setup helper from x86 embedding
first chunk allocator and put it in mm/percpu.c.  This will be used by
the default percpu first chunk allocator and possibly by other archs.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-10 16:27:48 +09:00
Tejun Heo 6074d5b0a3 percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
Impact: cleanup, more flexibility for first chunk init

Non-negative @dyn_size used to be allowed iff @unit_size wasn't auto.
This restriction stemmed from implementation detail and made things a
bit less intuitive.  This patch allows @dyn_size to be specified
regardless of @unit_size and swaps the positions of @dyn_size and
@unit_size so that the parameter order makes more sense (static,
reserved and dyn sizes followed by enclosing unit_size).

While at it, add @unit_size >= PCPU_MIN_UNIT_SIZE sanity check.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-10 16:27:48 +09:00
Tejun Heo 6b19b0c240 x86, percpu: setup reserved percpu area for x86_64
Impact: fix relocation overflow during module load

x86_64 uses 32bit relocations for symbol access and static percpu
symbols whether in core or modules must be inside 2GB of the percpu
segement base which the dynamic percpu allocator doesn't guarantee.
This patch makes x86_64 reserve PERCPU_MODULE_RESERVE bytes in the
first chunk so that module percpu areas are always allocated from the
first chunk which is always inside the relocatable range.

This problem exists for any percpu allocator but is easily triggered
when using the embedding allocator because the second chunk is located
beyond 2GB on it.

This patch also changes the meaning of PERCPU_DYNAMIC_RESERVE such
that it only indicates the size of the area to reserve for dynamic
allocation as static and dynamic areas can be separate.  New
PERCPU_DYNAMIC_RESERVED is increased by 4k for both 32 and 64bits as
the reserved area separation eats away some allocatable space and
having slightly more headroom (currently between 4 and 8k after
minimal boot sans module area) makes sense for common case
performance.

x86_32 can address anywhere from anywhere and doesn't need reserving.

Mike Galbraith first reported the problem first and bisected it to the
embedding percpu allocator commit.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Galbraith <efault@gmx.de>
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
2009-03-06 14:33:59 +09:00
Tejun Heo edcb463997 percpu, module: implement reserved allocation and use it for module percpu variables
Impact: add reserved allocation functionality and use it for module
	percpu variables

This patch implements reserved allocation from the first chunk.  When
setting up the first chunk, arch can ask to set aside certain number
of bytes right after the core static area which is available only
through a separate reserved allocator.  This will be used primarily
for module static percpu variables on architectures with limited
relocation range to ensure that the module perpcu symbols are inside
the relocatable range.

If reserved area is requested, the first chunk becomes reserved and
isn't available for regular allocation.  If the first chunk also
includes piggy-back dynamic allocation area, a separate chunk mapping
the same region is created to serve dynamic allocation.  The first one
is called static first chunk and the second dynamic first chunk.
Although they share the page map, their different area map
initializations guarantee they serve disjoint areas according to their
purposes.

If arch doesn't setup reserved area, reserved allocation is handled
like any other allocation.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06 14:33:59 +09:00
Tejun Heo 9a4f8a878b x86: make embedding percpu allocator return excessive free space
Impact: reduce unnecessary memory usage on certain configurations

Embedding percpu allocator allocates unit_size *
smp_num_possible_cpus() bytes consecutively and use it for the first
chunk.  However, if the static area is small, this can result in
excessive prellocated free space in the first chunk due to
PCPU_MIN_UNIT_SIZE restriction.

This patch makes embedding percpu allocator preallocate only what's
necessary as described by PERPCU_DYNAMIC_RESERVE and return the
leftover to the bootmem allocator.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06 14:33:59 +09:00
Tejun Heo cafe8816b2 percpu: use negative for auto for pcpu_setup_first_chunk() arguments
Impact: argument semantic cleanup

In pcpu_setup_first_chunk(), zero @unit_size and @dyn_size meant
auto-sizing.  It's okay for @unit_size as 0 doesn't make sense but 0
dynamic reserve size is valid.  Alos, if arch @dyn_size is calculated
from other parameters, it might end up passing in 0 @dyn_size and
malfunction when the size is automatically adjusted.

This patch makes both @unit_size and @dyn_size ssize_t and use -1 for
auto sizing.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06 14:33:59 +09:00
Tejun Heo 24ff954233 x86, percpu: fix minor bugs in setup_percpu.c
Recent changes in setup_percpu.c made a now meaningless DBG()
statement fail to compile and introduced a
comparison-of-different-types warning.  Fix them.

Compile failure is reported by Ingo Molnar.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 10:38:10 +09:00
Tejun Heo 8ac8375714 x86: add remapping percpu first chunk allocator
Impact: add better first percpu allocation for NUMA

On NUMA, embedding allocator can't be used as different units can't be
made to fall in the correct NUMA nodes.  To use large page mapping,
each unit needs to be remapped.  However, percpu areas are usually
much smaller than large page size and unused space hurts a lot as the
number of cpus grow.  This allocator remaps large pages for each chunk
but gives back unused part to the bootmem allocator making the large
pages mapped twice.

This adds slightly to the TLB pressure but is much better than using
4k mappings while still being NUMA-friendly.

Ingo suggested that this would be the correct approach for NUMA.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-02-24 11:57:22 +09:00
Tejun Heo 89c9215165 x86: add embedding percpu first chunk allocator
Impact: add better first percpu allocation for !NUMA

On !NUMA, we can simply allocate contiguous memory and use it for the
first chunk without mapping it into vmalloc area.  As the memory area
is covered by the large page physical memory mapping, it allows the
dynamic perpcu allocator to not add any TLB overhead for the static
percpu area and whatever falls into the first chunk and the
implementation is very simple too.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-24 11:57:21 +09:00
Tejun Heo 5f5d8405d1 x86: separate out setup_pcpu_4k() from setup_per_cpu_areas()
Impact: modularize percpu first chunk allocation

x86 is gonna have a few different strategies for the first chunk
allocation.  Modularize it by separating out the current allocation
mechanism into pcpu_alloc_bootmem() and setup_pcpu_4k().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-24 11:57:21 +09:00
Tejun Heo 8d408b4be3 percpu: give more latitude to arch specific first chunk initialization
Impact: more latitude for first percpu chunk allocation

The first percpu chunk serves the kernel static percpu area and may or
may not contain extra room for further dynamic allocation.
Initialization of the first chunk needs to be done before normal
memory allocation service is up, so it has its own init path -
pcpu_setup_static().

It seems archs need more latitude while initializing the first chunk
for example to take advantage of large page mapping.  This patch makes
the following changes to allow this.

* Define PERCPU_DYNAMIC_RESERVE to give arch hint about how much space
  to reserve in the first chunk for further dynamic allocation.

* Rename pcpu_setup_static() to pcpu_setup_first_chunk().

* Make pcpu_setup_first_chunk() much more flexible by fetching page
  pointer by callback and adding optional @unit_size, @free_size and
  @base_addr arguments which allow archs to selectively part of chunk
  initialization to their likings.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-24 11:57:21 +09:00
Tejun Heo 458a3e644c x86: update populate_extra_pte() and add populate_extra_pmd()
Impact: minor change to populate_extra_pte() and addition of pmd flavor

Update populate_extra_pte() to return pointer to the pte_t for the
specified address and add populate_extra_pmd() which only populates
till the pmd and returns pointer to the pmd entry for the address.

For 64bit, pud/pmd/pte fill functions are separated out from
set_pte_vaddr[_pud]() and used for set_pte_vaddr[_pud]() and
populate_extra_{pte|pmd}().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-24 11:57:21 +09:00
Tejun Heo 11124411aa x86: convert to the new dynamic percpu allocator
Impact: use new dynamic allocator, unified access to static/dynamic
        percpu memory

Convert to the new dynamic percpu allocator.

* implement populate_extra_pte() for both 32 and 64
* update setup_per_cpu_areas() to use pcpu_setup_static()
* define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr()
* define config HAVE_DYNAMIC_PER_CPU_AREA

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-20 16:29:09 +09:00
Tejun Heo 60a5317ff0 x86: implement x86_32 stack protector
Impact: stack protector for x86_32

Implement stack protector for x86_32.  GDT entry 28 is used for it.
It's set to point to stack_canary-20 and have the length of 24 bytes.
CONFIG_CC_STACKPROTECTOR turns off CONFIG_X86_32_LAZY_GS and sets %gs
to the stack canary segment on entry.  As %gs is otherwise unused by
the kernel, the canary can be anywhere.  It's defined as a percpu
variable.

x86_32 exception handlers take register frame on stack directly as
struct pt_regs.  With -fstack-protector turned on, gcc copies the
whole structure after the stack canary and (of course) doesn't copy
back on return thus losing all changed.  For now, -fno-stack-protector
is added to all files which contain those functions.  We definitely
need something better.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-10 00:42:01 +01:00
Brian Gerst 552be871e6 x86: pass in cpu number to switch_to_new_gdt()
Impact: cleanup, prepare for xen boot fix.

Xen needs to call this function very early to setup the GDT and
per-cpu segments.  Remove the call to smp_processor_id() and just
pass in the cpu number.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31 14:28:50 +09:00
Tejun Heo cf3997f507 x86: clean up indentation in setup_per_cpu_areas()
Impact: cosmetic cleanup

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 14:25:05 +09:00
James Bottomley 22f25138c3 x86: fix build breakage on voyage
Impact: build fix

x86_cpu_to_apicid and x86_bios_cpu_apicid aren't defined for voyage.
Earlier patch forgot to conditionalize early percpu clearing.  Fix it.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 14:21:37 +09:00
Brian Gerst 2697fbd5fa x86: load new GDT after setting up boot cpu per-cpu area
Impact: sync 32 and 64-bit code

Merge load_gs_base() into switch_to_new_gdt().  Load the GDT and
per-cpu state for the boot cpu when its new area is set up.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:48 +09:00
Brian Gerst b2d2f4312b x86: initialize per-cpu GDT segment in per-cpu setup
Impact: cleanup

Rename init_gdt() to setup_percpu_segment(), and move it to
setup_percpu.c.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:48 +09:00
Brian Gerst 89c9c4c58e x86: make Voyager use x86 per-cpu setup.
Impact: standardize all x86 platforms on same setup code

With the preceding changes, Voyager can use the same per-cpu setup
code as all the other x86 platforms.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:48 +09:00
Brian Gerst 34019be1cd x86: don't assume boot cpu is #0
Impact: minor cleanup

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:48 +09:00
Brian Gerst 1688401a0f x86: move this_cpu_offset
Impact: Small cleanup

Define BOOT_PERCPU_OFFSET and use it for this_cpu_offset and
__per_cpu_offset initializers.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:48 +09:00
Brian Gerst 996db817e3 x86: only compile setup_percpu.o on SMP
Impact: Minor build optimization

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:47 +09:00
Brian Gerst ec70de8b04 x86: move apic variables to apic.c
Impact: Code movement

Move the variable definitions to apic.c.  Ifdef the copying of
the two early per-cpu variables, since Voyager doesn't use them.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-27 12:56:47 +09:00