This patch introduces a batched trimming feature, which submits split discard
commands.
This is to avoid long latency due to huge trim commands.
If fstrim was triggered ranging from 0 to the end of device, we should lock
all the checkpoint-related mutexes, resulting in very long latency.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If device is read-only, we should not proceed data recovery.
But, if the previous checkpoint was done by normal clean shutdown, it's safe to
proceed the recovery, since there will be no data to be recovered.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds FASTBOOT flag into checkpoint as follows.
- CP_UMOUNT_FLAG is set when system is umounted.
- CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries
was done.
So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly.
Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option, norecovery, which is mostly same as
disable_roll_forward. The only difference is that norecovery should be activated
with read-only mount option.
This can be used when user wants to check whether f2fs is mountable or not
without any recovery process. (e.g., xfstests/200)
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If wrong mount option was requested, f2fs tries to fill_super again.
But, during the next trial, f2fs has no valid mount options, since
parse_options deleted all the separators in the original string.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, there are several variables with Boolean type as below:
struct f2fs_sb_info {
...
int s_dirty;
bool need_fsck;
bool s_closing;
...
bool por_doing;
...
}
For this there are some issues:
1. there are some space of f2fs_sb_info is wasted due to aligning after Boolean
type variables by compiler.
2. if we continuously add new flag into f2fs_sb_info, structure will be messed
up.
So in this patch, we try to:
1. switch s_dirty to Boolean type variable since it has two status 0/1.
2. merge s_dirty/need_fsck/s_closing/por_doing variables into s_flag.
3. introduce an enum type which can indicate different states of sbi.
4. use new introduced universal interfaces is_sbi_flag_set/{set,clear}_sbi_flag
to operate flags for sbi.
After that, above issues will be fixed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the previous checkpoint was done without CP_UMOUNT flag, it needs to do
checkpoint with CP_UMOUNT for the next fast boot.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to trigger checkpoint with umount flag when kill_sb was called.
In kill_sb, f2fs_sync_fs was finally called, but at this time, f2fs can't do
checkpoint with CP_UMOUNT.
After then, f2fs_put_super is not doing checkpoint, since it is not dirty.
So, this patch adds a flag to indicate f2fs_sync_fs is called during umount.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two slab cache inode_entry_slab and winode_slab using the same
structure as below:
struct dir_inode_entry {
struct list_head list; /* list head */
struct inode *inode; /* vfs inode pointer */
};
struct inode_entry {
struct list_head list;
struct inode *inode;
};
It's a little waste that the two cache can not share their memory space for each
other.
So in this patch we remove one redundant winode_slab slab cache, then use more
universal name struct inode_entry as remaining data structure name of slab,
finally we reuse the inode_entry_slab to store dirty dir item and gc item for
more effective.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Because we have checked the contrary condition in case of "if" judgment, we do
not need to check the condition again in case of "else" judgment. Let's remove
it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new
option is set without BG_GC, then if any error occurred in the following
procedure, we can restore to start the gc thread.
But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is
not set in new option, so we'd better move this condition judgment out of
start_gc_thread to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Set raw_super default to NULL to avoid the possibly used
uninitialized warning, though we may never hit it in fact.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
o F2FS_IOC_START_ATOMIC_WRITE
o F2FS_IOC_COMMIT_ATOMIC_WRITE
The database engine should be aware of the following sequence.
1. open
-> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
: all the written data will be treated as atomic pages.
3. commit
-> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
: this flushes all the data blocks to the disk, which will be shown all or
nothing by f2fs recovery procedure.
4. repeat to #2.
The IO pattens should be:
,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE
CP | D D D D D D | FSYNC | D D D D | FSYNC ...
`- COMMIT_ATOMIC_WRITE
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces FITRIM in f2fs_ioctl.
In this case, f2fs will issue small discards and prefree discards as many as
possible for the given area.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new data structure to control checkpoint parameters.
Currently, it presents the reason of checkpoint such as is_umount and normal
sync.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In manual of mount, we descript remount as below:
"mount -o remount,rw /dev/foo /dir
After this call all old mount options are replaced and arbitrary stuff from
fstab is ignored, except the loop= option which is internally generated and
maintained by the mount command."
Previously f2fs do not clear up old mount options when remount_fs, so we have no
chance of disabling previous option (e.g. flush_merge). Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes
sector device at maximum. But now f2fs only support 512 bytes size sector, so
block device such as zRAM which uses page cache as its block storage space will
not be mounted successfully as mismatch between sector size of zRAM and sector
size of f2fs supported.
In this patch we support large sector size in f2fs, so block device with sector
size of 512/1024/2048/4096 bytes can be supported in f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.
This may be used by storage showing very high random write performance.
For example, it can be used when,
Seq. writes (Data) + wait + Seq. writes (Node)
is pretty much slower than,
Rand. writes (Data)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously f2fs only counts dirty dentry pages, but there is no reason not to
expand the scope.
This patch changes the names on the management of dirty pages and to count
dirty pages in each inode info as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can make the code a bit simpler because we know that "!retry" is
zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Theoretically, our total inodes number is the same as total node number, but
there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2
(meta nid), and they should never be used by user, so our total/free inode
number calculated in ->statfs is wrong.
This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by
recalculating total/free inode number with the macro.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two rules when EIO is occurred.
1. don't write any checkpoint data to preserve the previous checkpoint
2. don't lose the cached dentry/node/meta pages
So, at first, this patch adds set_page_dirty in f2fs_write_end_io's failure.
Then, writing checkpoint/dentry/node blocks is not allowed.
Note that, for the data pages, we can't just throw away by redirtying them.
Otherwise, kworker can fall into infinite loop to flush them.
(Ref. xfstests/019)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to check s_dirty under cp_mutex, since s_dirty is reset under that
mutex.
And previous condition was not correct, since we can omit doing checkpoint
when checkpoint was done followed by all the node pages were written back.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch gives another chance to try mount process when we encounter an error.
This makes an effect on the roll-forward recovery failures as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The generic_shutdown_super calls sync_filesystem, evict_inode, and then
f2fs_put_super. In f2fs_evict_inode, we remain some dirty inode information
so we should release them at f2fs_put_super.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is the errorneous scenario.
1. write data
2. do checkpoint
3. produce some dirty node pages by the gc thread
4. write back dirty node pages
5. f2fs_put_super will skip the checkpoint, since dirty count for node pages is
zero.
This patch removes such the wrong condition check.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix typo and some grammatical errors.
The words "filesystem" and "readahead" are being used without the space treewide.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We do not need to block on ->node_write among different node page writers e.g.
fsync/flush, unless we have a node page writer from write_checkpoint.
So it's better use rw_semaphore instead of mutex type for ->node_write to
promote performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes the naming of orphan-related data structures to use as
inode numbers managed globally.
Later, we can use this facility for managing any inode number lists.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option, nobarrier, in f2fs.
The assumption in here is that file system keeps the IO ordering, but
doesn't care about cache flushes inside the storages.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should put root inode correctly in error path of fill_super, otherwise we
may encounter a leak case of inode resource.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch we use below inner macro and function to clean up codes.
1. ADDRS_PER_PAGE
2. SM_I
3. f2fs_readonly
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add lower bound verification for nid in check_nid_range, so nids
reserved like 0, node, meta passed by caller could be checked there.
And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying
code.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce help function {create,destroy}_flush_cmd_control to clean up
the create/destory flush merge operation.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Split the flush_merge fields from sm_i, and use the new struct flush_cmd_control
to wrap it, so that we can igonre these fileds if flush_merge is disable, and
it alse can the structs more neat.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add the *remount* handle of flush_merge option, so that the users
can enable flush_merge in the runtime, such as the underlying device
handles the cache_flush command relatively slowly.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Enable flush_merge only in f2fs is not read-only, so does the mount
option show.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch-set includes the following major enhancement patches.
o introduce large directory support
o introduce f2fs_issue_flush to merge redundant flush commands
o merge write IOs as much as possible aligned to the segment
o add sysfs entries to tune the f2fs configuration
o use radix_tree for the free_nid_list to reduce in-memory operations
o remove costly bit operations in f2fs_find_entry
o enhance the readahead flow for CP/NAT/SIT/SSA blocks
The other bug fixes are as follows.
o recover xattr node blocks correctly after sudden-power-cut
o fix to calculate the maximum number of node ids
o enhance to handle many error cases
And, there are a bunch of cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=eSW+
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches.
- introduce large directory support
- introduce f2fs_issue_flush to merge redundant flush commands
- merge write IOs as much as possible aligned to the segment
- add sysfs entries to tune the f2fs configuration
- use radix_tree for the free_nid_list to reduce in-memory operations
- remove costly bit operations in f2fs_find_entry
- enhance the readahead flow for CP/NAT/SIT/SSA blocks
The other bug fixes are as follows:
- recover xattr node blocks correctly after sudden-power-cut
- fix to calculate the maximum number of node ids
- enhance to handle many error cases
And, there are a bunch of cleanups"
* tag 'for-f2fs-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (62 commits)
f2fs: fix wrong statistics of inline data
f2fs: check the acl's validity before setting
f2fs: introduce f2fs_issue_flush to avoid redundant flush issue
f2fs: fix to cover io->bio with io_rwsem
f2fs: fix error path when fail to read inline data
f2fs: use list_for_each_entry{_safe} for simplyfying code
f2fs: avoid free slab cache under spinlock
f2fs: avoid unneeded lookup when xattr name length is too long
f2fs: avoid unnecessary bio submit when wait page writeback
f2fs: return -EIO when node id is not matched
f2fs: avoid RECLAIM_FS-ON-W warning
f2fs: skip unnecessary node writes during fsync
f2fs: introduce fi->i_sem to protect fi's info
f2fs: change reclaim rate in percentage
f2fs: add missing documentation for dir_level
f2fs: remove unnecessary threshold
f2fs: throttle the memory footprint with a sysfs entry
f2fs: avoid to drop nat entries due to the negative nr_shrink
f2fs: call f2fs_wait_on_page_writeback instead of native function
f2fs: introduce nr_pages_to_write for segment alignment
...
Some storage devices show relatively high latencies to complete cache_flush
commands, even though their normal IO speed is prettry much high. In such
the case, it needs to merge cache_flush commands as much as possible to avoid
issuing them redundantly.
So, this patch introduces a mount option, "-o flush_merge", to mitigate such
the overhead.
If this option is enabled by user, F2FS merges the cache_flush commands and then
issues just one cache_flush on behalf of them. Once the single command is
finished, F2FS sends a completion signal to all the pending threads.
Note that, this option can be used under a workload consisting of very intensive
concurrent fsync calls, while the storage handles cache_flush commands slowly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduce is_merged_page() to check whether current page is merged
in f2fs bio cache. When page is not in cache, we can avoid submitting bio cache,
resulting in having more chance to merge pages.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces fi->i_sem to protect fi's info that includes xattr_ver,
pino, i_nlink.
This enables to remove i_mutex during f2fs_sync_file, resulting in performance
improvement when a number of fsync calls are triggered from many concurrent
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
