Also clean up the file flags -> file mode -> wanted caps functions while
we're at it. This resyncs this file with userspace.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes an issue triggered by running concurrent syncs. One of the syncs
would go through while the other would just hang indefinitely. In any case, we
never actually want to wake a single waiter, so the *_all functions should
be used.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
When we embed a dentry lease release notification in a request, invalidate
our lease so we don't think we still have it. Otherwise we can get all
sorts of incorrect client behavior when multiple clients are interacting
with the same part of the namespace.
Signed-off-by: Sage Weil <sage@newdream.net>
Free the ceph_pg_mapping structs when they are removed from the pg_temp
rbtree. Also fix a leak in the __insert_pg_mapping() error path.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to set the d_release dop for snapdir and snapped dentries so that
the ceph_dentry_info struct gets released. We also use the dcache to
cache readdir results when possible, which only works if we know when
dentries are dropped from the cache. Since we don't use the dcache for
readdir in the hidden snapdir, avoid that case in ceph_dentry_release.
Signed-off-by: Sage Weil <sage@newdream.net>
We should always go to the MDS for readdir on the hidden snapdir. The
set of snapshots can change at any time; the client can't trust its cache
for that.
Signed-off-by: Sage Weil <sage@newdream.net>
Strip the cap and dentry releases from replayed messages. They can
cause the shared state to get out of sync because they were generated
(with the request message) earlier, and no longer reflect the current
client state.
Signed-off-by: Sage Weil <sage@newdream.net>
Replayed rename operations (after an mds failure/recovery) were broken
because the request paths were regenerated from the dentry names, which
get mangled when d_move() is called.
Instead, resend the previous request message when replaying completed
operations. Just make sure the REPLAY flag is set and the target ino is
filled in.
This fixes problems with workloads doing renames when the MDS restarts,
where the rename operation appears to succeed, but on mds restart then
fails (leading to client confusion, app breakage, etc.).
Signed-off-by: Sage Weil <sage@newdream.net>
The buffer was too small. Make it bigger, use snprintf(), put brackets
around the ipv6 address to avoid mixing it up with the :port, and use the
ever-so-handy %pI[46] formats.
Signed-off-by: Sage Weil <sage@newdream.net>
A message can be on a queue (pending or sent), or out_msg (sending), or
both. We were assuming that if it's not on a queue it couldn't be out_msg,
but that was false in the case of lossy connections like the OSD. Fix
ceph_con_revoke() to treat these cases independently. Also, fix the
out_kvec_is_message check to only trigger if we are currently sending
_this_ message.
This fixes a GPF in tcp_sendpage, triggered by OSD restarts.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to increase the total and used counters when allocating a new cap
in the non-reserved (cap import) case.
Signed-off-by: Sage Weil <sage@newdream.net>
We can drop caps with an mds request. Ensure we only drop unused AND
clean caps, since the MDS doesn't support cap writeback in that context,
nor do we track it. If caps are dirty, and the MDS needs them back, we
it will revoke and we will flush in the normal fashion.
This fixes a possibly loss of metadata.
Signed-off-by: Sage Weil <sage@newdream.net>
We may not recurse for CHOOSE_LEAF if we start with a leaf node. When
that happens, the out2 vector needs to be filled in with the result.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes a race between handle_reply finishing an mds request, signalling
completion, and then dropping the request structing and its dentry+inode
refs, and pre_umount function waiting for requests to finish before
letting the vfs tear down the dcache. If umount was delayed waiting for
mds requests, we could race and BUG in shrink_dcache_for_umount_subtree
because of a slow dput.
This delays umount until the msgr queue flushes, which means handle_reply
will exit and will have dropped the ceph_mds_request struct. I'm assuming
the VFS has already ensured that its calls have all completed and those
request refs have thus been dropped as well (I haven't seen that race, at
least).
Signed-off-by: Sage Weil <sage@newdream.net>
Handle a splice_dentry failure (due to a d_materialize_unique error)
without crashing. (Also, report the error code.)
Signed-off-by: Sage Weil <sage@newdream.net>
If the incremental osdmap has a new crush map, advance the position after
decoding so that we can parse the rest of the osdmap properly.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to properly initialize skip, as not all alloc_msg op instances
set it.
Also, BUG if someone says skip but also allocates a message.
Signed-off-by: Sage Weil <sage@newdream.net>
If we have enough memory to allocate a new cap release message, do so, so
that we can send a partial release message immediately. This keeps us from
making the MDS wait when the cap release it needs is in a partially full
release message.
If we fail because of ENOMEM, oh well, they'll just have to wait a bit
longer.
Signed-off-by: Sage Weil <sage@newdream.net>
If we get an IMPORT that give us a cap, but we don't have the inode, queue
a release (and try to send it immediately) so that the MDS doesn't get
stuck waiting for us.
Signed-off-by: Sage Weil <sage@newdream.net>
bdi_seq is an atomic_long_t but we're using ATOMIC_INIT, which causes
build failures on ia64. This patch fixes it to use ATOMIC_LONG_INIT.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If the client revokes a lease with a higher seq than what we have, keep
the mds's seq, so that it honors our release. Otherwise, we can hang
indefinitely.
Signed-off-by: Sage Weil <sage@newdream.net>
We were setting f_namelen in kstatfs to PATH_MAX instead of NAME_MAX.
That disagrees with ceph_lookup behavior (which checks against NAME_MAX),
and also makes the pjd posix test suite spit out ugly errors because with
can't clean up its temporary files.
Signed-off-by: Sage Weil <sage@newdream.net>
We misused list_move_tail() to order the dentry in d_subdirs.
This will screw up the d_subdirs order.
This bug can be reliably reproduced by:
1. mount ceph fs.
2. on ceph fs, git clone git://ceph.newdream.net/git/ceph.git
3. Run autogen.sh in ceph directory.
(Note: Errors only occur at the first time you run autogen.sh.)
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: clean up on forwarded aborted mds request
ceph: fix leak of osd authorizer
ceph: close out mds, osd connections before stopping auth
ceph: make lease code DN specific
fs/ceph: Use ERR_CAST
ceph: renew auth tickets before they expire
ceph: do not resend mon requests on auth ticket renewal
ceph: removed duplicated #includes
ceph: avoid possible null dereference
ceph: make mds requests killable, not interruptible
sched: add wait_for_completion_killable_timeout
If an mds request is aborted (timeout, SIGKILL), it is left registered to
keep our state in sync with the mds. If we get a forward notification,
though, we know the request didn't succeed and we can unregister it
safely. We were trying to resend it, but then bailing out (and not
unregistering) in __do_request.
Signed-off-by: Sage Weil <sage@newdream.net>
The auth module (part of the mon_client) is needed to free any
ceph_authorizer(s) used by the mds and osd connections. Flush the msgr
workqueue before stopping monc to ensure that the destroy_authorizer
auth op is available when those connections are closed out.
Signed-off-by: Sage Weil <sage@newdream.net>
The lease code includes a mask in the CEPH_LOCK_* namespace, but that
namespace is changing, and only one mask (formerly _DN == 1) is used, so
hard code for that value for now.
If we ever extend this code to handle leases over different data types we
can extend it accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of
the returned value is the same as the type of the enclosing function.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
We were only requesting renewal after our tickets expire; do so before
that. Most of the low-level logic for this was already there; just use
it.
Signed-off-by: Sage Weil <sage@newdream.net>
We only want to send pending mon requests when we successfully
authenticate. If we are already authenticated, like when we renew our
ticket, there is no need to resend pending requests.
Signed-off-by: Sage Weil <sage@newdream.net>
fs/ceph/auth.c: linux/slab.h is included more than once.
fs/ceph/super.h: linux/slab.h is included more than once.
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sage Weil <sage@newdream.net>
ac->ops may be null; use protocol id in error message instead.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The underlying problem is that many mds requests can't be restarted. For
example, a restarted create() would return -EEXIST if the original request
succeeds. However, we do not want a hung MDS to hang the client too. So,
use the _killable wait_for_completion variants to abort on SIGKILL but
nothing else.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (59 commits)
ceph: reuse mon subscribe message instead of allocated anew
ceph: avoid resending queued message to monitor
ceph: Storage class should be before const qualifier
ceph: all allocation functions should get gfp_mask
ceph: specify max_bytes on readdir replies
ceph: cleanup pool op strings
ceph: Use kzalloc
ceph: use common helper for aborted dir request invalidation
ceph: cope with out of order (unsafe after safe) mds reply
ceph: save peer feature bits in connection structure
ceph: resync headers with userland
ceph: use ceph. prefix for virtual xattrs
ceph: throw out dirty caps metadata, data on session teardown
ceph: attempt mds reconnect if mds closes our session
ceph: clean up send_mds_reconnect interface
ceph: wait for mds OPEN reply to indicate reconnect success
ceph: only send cap releases when mds is OPEN|HUNG
ceph: dicard cap releases on mds restart
ceph: make mon client statfs handling more generic
ceph: drop src address(es) from message header [new protocol feature]
...
Use the same message, allocated during startup. No need to reallocate a
new one each time around (and potentially ENOMEM).
Signed-off-by: Sage Weil <sage@newdream.net>
