Commit Graph

60 Commits

Author SHA1 Message Date
Trond Myklebust 347e2233b7 SUNRPC: Fix memory corruption issue on 32-bit highmem systems
Some architectures, such as ARM-32 do not return the same base address
when you call kmap_atomic() twice on the same page.
This causes problems for the memmove() call in the XDR helper routine
"_shift_data_right_pages()", since it defeats the detection of
overlapping memory ranges, and has been seen to corrupt memory.

The fix is to distinguish between the case where we're doing an
inter-page copy or not. In the former case of we know that the memory
ranges cannot possibly overlap, so we can additionally micro-optimise
by replacing memmove() with memcpy().

Reported-by: Mark Young <MYoung@nvidia.com>
Reported-by: Matt Craighead <mcraighead@nvidia.com>
Cc: Bruce Fields <bfields@fieldses.org>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Matt Craighead <mcraighead@nvidia.com>
2013-08-28 15:43:43 -04:00
Jeff Layton 4c190e2f91 sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
When GSSAPI integrity signatures are in use, or when we're using GSSAPI
privacy with the v2 token format, there is a trailing checksum on the
xdr_buf that is returned.

It's checked during the authentication stage, and afterward nothing
cares about it. Ordinarily, it's not a problem since the XDR code
generally ignores it, but it will be when we try to compute a checksum
over the buffer to help prevent XID collisions in the duplicate reply
cache.

Fix the code to trim off the checksums after verifying them. Note that
in unwrap_integ_data, we must avoid trying to reverify the checksum if
the request was deferred since it will no longer be present when it's
revisited.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2013-02-08 15:19:10 -05:00
Weston Andros Adamson 18e624ad03 SUNRPC: remove BUG_ON in xdr_shrink_bufhead
Replace bounds checking BUG_ON() with a WARN_ON_ONCE() and resetting
the requested len to the max.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04 14:43:42 -05:00
Trond Myklebust a11a2bf4de SUNRPC: Optimise away unnecessary data moves in xdr_align_pages
We only have to call xdr_shrink_pagelen() if the remaining RPC
message does not fit in the page buffer length that we supplied
to xdr_align_pages().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-28 15:58:42 -04:00
Trond Myklebust 8a9a8b8332 SUNRPC: Fix the return value of xdr_align_pages()
The callers of xdr_align_pages() expect it to return the number of bytes
of actual XDR data remaining in the pages.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-26 12:43:10 -04:00
Linus Torvalds 1fad1e9a74 NFS client updates for Linux 3.6
Features include:
 - More preparatory patches for modularising NFSv2/v3/v4.
   Split out the various NFSv2/v3/v4-specific code into separate
   files
 - More preparation for the NFSv4 migration code
 - Ensure that OPEN(O_CREATE) observes the pNFS mds threshold parameters
 - pNFS fast failover when the data servers are down
 - Various cleanups and debugging patches
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQFwYRAAoJEGcL54qWCgDy6YAQAIZuUPFCQbuzWev4L/XA0uhg
 0xjr9YBmg57UOs8e7FhS0azJip+D/kmF2Rx5gCMX0QO/IwaEVoms4BS8zjFOr3yL
 cPIyY5ErF+WJ25f3Mz8k0wOHTzrOvMdq4/7TQf5hztsrGYFid78sSb3O9ZO9bgb4
 QxqhgA0Z4S2vIqeObJAF9BT5UOT/cXfVKV0iTd52ZQVA+ZhqJ2SDlNFsoxnVOweV
 qzKOi0FZCPsjH+Z4a/LLdieHG5AYRPhOScBdG7gTFAdkysI8DDtSNCmJ68dMHYRw
 OHtyt/X4k9TImfwauV3Eww1sw3NkDswX+dv3GOSDTlMvVBrm0WXWj2zoHZbOB+0Q
 ETI9Zpolvd9pADtyfu9c+kCYIR+NdB4lGKd15iZfdEy/CZ0CtbLAbn5Szo2YcwNR
 iVjswR0jsbklD+mZjlMeZoG4JX2d9ZRqLs20POz7QQBmdIQ8jb9/SwVj9zGvX0w0
 NyVUHTFlGaNwkpo7oeRoWi1xjZWE6OzfoncV/46DOJWb08OKZ4fR4ugMYJWGi7Xx
 I4nQrIiHtInqL+sF5Y3wlZ48dufLuIhAcHh7klxgud4GRj7t8j+a99pTrRmpHvvC
 4K2Yu69VYcIA7N2RsSLohIllGPFmMwpdar7yERdD0So8/fz/zf7wn0dFFYY11+bL
 YNVVGhvNxccMU5EU9YR4
 =Lc59
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Features include:
   - More preparatory patches for modularising NFSv2/v3/v4.  Split out
     the various NFSv2/v3/v4-specific code into separate files
   - More preparation for the NFSv4 migration code
   - Ensure that OPEN(O_CREATE) observes the pNFS mds threshold
     parameters
   - pNFS fast failover when the data servers are down
   - Various cleanups and debugging patches"

* tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (67 commits)
  nfs: fix fl_type tests in NFSv4 code
  NFS: fix pnfs regression with directio writes
  NFS: fix pnfs regression with directio reads
  sunrpc: clnt: Add missing braces
  nfs: fix stub return type warnings
  NFS: exit_nfs_v4() shouldn't be an __exit function
  SUNRPC: Add a missing spin_unlock to gss_mech_list_pseudoflavors
  NFS: Split out NFS v4 client functions
  NFS: Split out the NFS v4 filesystem types
  NFS: Create a single nfs_clone_super() function
  NFS: Split out NFS v4 server creating code
  NFS: Initialize the NFS v4 client from init_nfs_v4()
  NFS: Move the v4 getroot code to nfs4getroot.c
  NFS: Split out NFS v4 file operations
  NFS: Initialize v4 sysctls from nfs_init_v4()
  NFS: Create an init_nfs_v4() function
  NFS: Split out NFS v4 inode operations
  NFS: Split out NFS v3 inode operations
  NFS: Split out NFS v2 inode operations
  NFS: Clean up nfs4_proc_setclientid() and friends
  ...
2012-07-30 19:16:57 -07:00
Ben Hutchings 2c53040f01 net: Fix (nearly-)kernel-doc comments for various functions
Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 23:13:45 -07:00
Trond Myklebust 140150dbb1 SUNRPC: Remove unused function xdr_encode_pages
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:49 -04:00
Trond Myklebust f8bb7f0854 SUNRPC: Clean up xdr_enter_page
Use the xdr_align_pages() helper

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:46 -04:00
Trond Myklebust 3994ee6fbf SUNRPC: Clean up xdr_read_pages
Move the page alignment code into a separate helper.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:46 -04:00
Trond Myklebust bd00f84bc5 SUNRPC: Simplify the end-of-buffer calculation in xdr_read_pages
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:46 -04:00
Trond Myklebust b760b3131d SUNRPC: Remove open coded stream position calculation in xdr_read_pages
Use xdr_stream_pos() instead.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:45 -04:00
Trond Myklebust 4517d526c8 SUNRPC: Add the helper xdr_stream_pos
Add a helper to report the current offset from the start of the
xdr_stream.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:44 -04:00
Trond Myklebust c337d3655c SUNRPC: xdr_read_pages should return the amount of XDR encoded page data
Callers of xdr_read_pages() will want to know exactly how much XDR
data is encoded in the pages after the data realignment.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:43 -04:00
Trond Myklebust bfeea1dc1c SUNRPC: Don't decode beyond the end of the RPC reply message
Now that xdr_inline_decode() will automatically cross into the page
buffers, we need to ensure that it doesn't exceed the total reply
message length.

This patch sets up a counter that tracks the number of words
remaining in the reply message, and ensures that xdr_inline_decode,
xdr_read_pages and xdr_enter_page respect the end of message boundary.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:20:41 -04:00
Trond Myklebust 1537693cea SUNRPC: Clean up xdr_set_iov()
Remove the 'p' argument, since that is only ever set by xdr_init_decode.
Add sanity checking of 'p' inside xdr_init_decode itself.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28 17:17:48 -04:00
Trond Myklebust 76cacaabf1 SUNRPC: xdr_read_pages needs to clear xdr->page_ptr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-26 15:32:40 -04:00
Eric Dumazet 95c9617472 net: cleanup unsigned to unsigned int
Use of "unsigned int" is preferred to bare "unsigned" in net tree.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:44:40 -04:00
Cong Wang b854178601 sunrpc: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:28 +08:00
Andy Adamson bf118a342f NFSv4: include bitmap in nfsv4 get acl data
The NFSv4 bitmap size is unbounded: a server can return an arbitrary
sized bitmap in an FATTR4_WORD0_ACL request.  Replace using the
nfs4_fattr_bitmap_maxsz as a guess to the maximum bitmask returned by a server
with the inclusion of the bitmap (xdr length plus bitmasks) and the acl data
xdr length to the (cached) acl page data.

This is a general solution to commit e5012d1f "NFSv4.1: update
nfs4_fattr_bitmap_maxsz" and fixes hitting a BUG_ON in xdr_shrink_bufhead
when getting ACLs.

Fix a bug in decode_getacl that returned -EINVAL on ACLs > page when getxattr
was called with a NULL buffer, preventing ACL > PAGE_SIZE from being retrieved.

Cc: stable@kernel.org
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-05 10:42:42 -05:00
Trond Myklebust 0d961aa934 SUNRPC: Convert the backchannel exports to EXPORT_SYMBOL_GPL
Ensure that the backchannel exports conform to the existing sunrpc
practice.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 09:12:23 -04:00
Benny Halevy f7da7a129d SUNRPC: introduce xdr_init_decode_pages
Initialize xdr_stream and xdr_buf using an array of page pointers
and length of buffer.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:52:32 +03:00
Trond Myklebust 6650239a4b NFS: Don't use vm_map_ram() in readdir
vm_map_ram() is not available on NOMMU platforms, and causes trouble
on incoherrent architectures such as ARM when we access the page data
through both the direct and the virtual mapping.

The alternative is to use the direct mapping to access page data
for the case when we are not crossing a page boundary, but to copy
the data into a linear scratch buffer when we are accessing data
that spans page boundaries.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org  [2.6.37]
2011-01-10 14:45:01 -05:00
Trond Myklebust ba8e452a4f SUNRPC: Add a helper function xdr_inline_peek
We sometimes need to be able to read ahead in an xdr_stream without
incrementing the current pointer position.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23 15:27:32 -04:00
Chuck Lever b4687da7fc SUNRPC: Refactor logic to NUL-terminate strings in pages
Clean up: Introduce a helper to '\0'-terminate XDR strings
that are placed in a page in the page cache.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21 16:55:48 -04:00
Trond Myklebust cf187c2d7e SUNRPC: Don't truncate tail data unnecessarily in xdr_shrink_pagelen
If we have unused buffer space, then we should make use of that rather
than unnecessarily truncating the message.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29 12:13:16 -04:00
Benny Halevy 42d6d8ab51 sunrpc: simplify xdr_shrink_pagelen use of "copy"
The "copy" variable value can be computed using the existing
logic rather than repeating it.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29 12:13:15 -04:00
Benny Halevy 2e29ebb811 sunrpc: don't use the copy variable in nested block
to clean up the code "copy" will be set prior to the block
hence it mustn't be used there.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29 12:13:15 -04:00
Benny Halevy 0fe62a3590 sunrpc: clean up xdr_shrink_pagelen use of temporary pointer
char *p is used only as a shorthand for tail->iov_base + len in a nested
block.  Move it there.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29 12:13:15 -04:00
Benny Halevy b1a7a91ada sunrpc: don't shorten buflen twice in xdr_shrink_pagelen
On Jan. 14, 2009, 2:50 +0200, andros@netapp.com wrote:
> From: Andy Adamson <andros@netapp.com>
>
> The buflen is reset for all cases at the end of xdr_shrink_pagelen.
> The data left in the tail after xdr_read_pages is not processed when the
> buflen is incorrectly set.

Note that in this case we also lose (len - tail->iov_len)
bytes from the buffered data in pages.

Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-29 12:13:15 -04:00
Kevin Coffman c43abaedaf xdr: Add an export for the helper function write_bytes_to_xdr_buf()
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:18 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Benny Halevy 98866b5abe sunrpc: ntoh -> be*_to_cpu
ntohl is already defined as be32_to_cpu.
be64_to_cpu has architecture specific optimized implementations.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-14 13:12:52 -04:00
Benny Halevy 9f162d2a81 sunrpc: hton -> cpu_to_be*
htonl is already defined as cpu_to_be32.
cpu_to_be64 has architecture specific optimized implementations.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-14 13:12:38 -04:00
Trond Myklebust 468039ee46 SUNRPC: Convert the xdr helpers and rpc_pipefs to EXPORT_SYMBOL_GPL
We've never considered the sunrpc code as part of any ABI to be used by
out-of-tree modules.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23 15:21:31 -05:00
Trond Myklebust daeba89d43 SUNRPC: don't call flush_dcache_page() with an invalid pointer
Fix a problem in _copy_to_pages(), whereby it may call flush_dcache_page()
with an invalid pointer due to the fact that 'pgto' gets incremented
beyond the end of the page array. Fix is to exit the loop without this
unnecessary increment of pgto.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-08 21:06:50 -04:00
Chuck Lever e5cff482c7 SUNRPC: Use unsigned string lengths in xdr_decode_string_inplace
XDR strings, opaques, and net objects should all use unsigned lengths.
To wit, RFC 4506 says:

4.2.  Unsigned Integer

   An XDR unsigned integer is a 32-bit datum that encodes a non-negative
   integer in the range [0,4294967295].

 ...

4.11.  String

   The standard defines a string of n (numbered 0 through n-1) ASCII
   bytes to be the number n encoded as an unsigned integer (as described
   above), and followed by the n bytes of the string.

After this patch, xdr_decode_string_inplace now matches the other XDR
string and array helpers that take a string length argument.  See:

xdr_encode_opaque_fixed, xdr_encode_opaque, xdr_encode_array

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-02-01 16:42:02 -05:00
Trond Myklebust a6eaf8bdf9 SUNRPC: Move exported declarations to the function declarations
Do this for all RPC client related functions and XDR functions.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:28 -05:00
Herbert Xu 68e3f5dd4d [CRYPTO] users: Fix up scatterlist conversion errors
This patch fixes the errors made in the users of the crypto layer during
the sg_init_table conversion.  It also adds a few conversions that were
missing altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 00:52:07 -07:00
Jens Axboe 642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Jens Axboe fa05f1286b Update net/ to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:56 +02:00
YOSHIFUJI Hideaki cca5172a7e [NET] SUNRPC: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:13 -08:00
Olga Kornievskaia 37a4e6cb03 rpc: move process_xdr_buf
Since process_xdr_buf() is useful outside of the kerberos-specific code, we
move it to net/sunrpc/xdr.c, export it, and rename it in keeping with xdr_*
naming convention of xdr.c.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06 10:46:44 -05:00
Trond Myklebust bee57c99c3 SUNRPC: Ensure xdr_buf_read_netobj() checks for memory overruns
Also clean up the code...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06 10:46:33 -05:00
Trond Myklebust 4e3e43ad14 SUNRPC: Add __(read|write)_bytes_from_xdr_buf
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06 10:46:32 -05:00
Trond Myklebust 1e78957e0a SUNRPC: Clean up argument types in xdr.c
Converts various integer buffer offsets and sizes to unsigned integer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06 10:46:32 -05:00
Alexey Dobriyan d8ed029d60 [SUNRPC]: trivial endianness annotations
pure s/u32/__be32/

[AV: large part based on Alexey's patches]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:01:21 -07:00
Trond Myklebust bce3481c91 This fixes a panic doing the first READDIR or READDIRPLUS call when:
* the client is ia64 or any platform that actually implements
    flush_dcache_page(), and

  * the server returns fsinfo.dtpref >= client's PAGE_SIZE, and

  * the server does *not* return post-op attributes for the directory
    in the READDIR reply.

Problem diagnosed by Greg Banks <gnb@melbourne.sgi.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05 13:17:12 -04:00
Trond Myklebust 8b23ea7bed RPC: Allow struc xdr_stream to read the page section of an xdr_buf
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-06-09 09:34:21 -04:00
Adrian Bunk fb459f45f7 SUNRPC: net/sunrpc/xdr.c: remove xdr_decode_string()
This patch removes ths unused function xdr_decode_string().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Charles Lever <Charles.Lever@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:53 -05:00