Commit Graph

113 Commits

Author SHA1 Message Date
Alex Riesen ef7ffe8f06 sunrpc: use formatting of module name in SUNRPC
gcc-4.3.3 produces the warning:
  "format not a string literal and no format arguments"

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <cel@citi.umich.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Tom Talpey <tmtalpey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:03 -07:00
Linus Torvalds f8965467f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20 21:04:44 -07:00
Joe Perches 3fa21e07e6 net: Remove unnecessary returns from void function()s
This patch removes from net/ (but not any netfilter files)
all the unnecessary return; statements that precede the
last closing brace of void functions.

It does not remove the returns that are immediately
preceded by a label as gcc doesn't like that.

Done via:
$ grep -rP --include=*.[ch] -l "return;\n}" net/ | \
  xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }'

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17 23:23:14 -07:00
Trond Myklebust d60dbb20a7 SUNRPC: Move the task->tk_bytes_sent and tk_rtt to struct rpc_rqst
It seems strange to maintain stats for bytes_sent in one structure, and
bytes received in another. Try to assemble all the RPC request-related
stats in struct rpc_rqst

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:36 -04:00
Chuck Lever ff8399709e SUNRPC: Replace jiffies-based metrics with ktime-based metrics
Currently RPC performance metrics that tabulate elapsed time use
jiffies time values.  This is problematic on systems that use slow
jiffies (for instance 100HZ systems built for paravirtualized
environments).  It is also a problem for computing precise latency
statistics for advanced network transports, such as InfiniBand,
that can have round-trip latencies significanly faster than a single
clock tick.

For the RPC client, adopt the high resolution time stamp mechanism
already used by the network layer and blktrace: ktime.

We use ktime format time stamps for all internal computations, and
convert to milliseconds for presentation.  As a result, we need only
addition operations in the performance critical paths; multiply/divide
is required only for presentation.

We could report RTT metrics in microseconds.  In fact the mountstats
format is versioned to accomodate exactly this kind of interface
improvement.

For now, however, we'll stay with millisecond precision for
presentation to maintain backwards compatibility with the handful of
currently deployed user space tools.  At a later point, we'll move to
an API such as BDI_STATS where a finer timestamp precision can be
reported.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:33 -04:00
Chuck Lever bbc72cea58 SUNRPC: RPC metrics and RTT estimator should use same RTT value
Compute an RPC request's RTT once, and use that value both for reporting
RPC metrics, and for adjusting the RTT context used by the RPC client's RTT
estimator algorithm.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:32 -04:00
Trond Myklebust a8ce4a8f37 SUNRPC: Fail over more quickly on connect errors
We should not allow soft tasks to wait for longer than the major timeout
period when waiting for a reconnect to occur.

Remove the field xprt->connect_timeout since it has been obsoleted by
xprt->reestablish_timeout.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:30 -04:00
Trond Myklebust 0b9e794313 SUNRPC: Move the test for XPRT_CONNECTING into xprt_connect()
This fixes a bug with setting xprt->stat.connect_start.

Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:29 -04:00
Trond Myklebust ee5ebe851e SUNRPC: Clean up xprt_release()
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14 15:09:29 -04:00
Eric Dumazet 0eae88f31c net: Fix various endianness glitches
Sparse can help us find endianness bugs, but we need to make some
cleanups to be able to more easily spot real bugs.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 19:06:52 -07:00
Trond Myklebust c9acb42ef1 SUNRPC: Fix a use after free bug with the NFSv4.1 backchannel
The ->release_request() callback was designed to allow the transport layer
to do housekeeping after the RPC call is done. It cannot be used to free
the request itself, and doing so leads to a use-after-free bug in
xprt_release().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-22 05:32:44 -04:00
Trond Myklebust feb8ca37cc SUNRPC: Ensure that we honour autoclose before attempting to reconnect
If the XPRT_CLOSE_WAIT flag is set, we need to ensure that we call
xprt->ops->close() while holding xprt_lock_write() before we can
start reconnecting.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03 08:10:17 -05:00
Rahul Iyer 4cfc7e6019 nfsd41: sunrpc: Added rpc server-side backchannel handling
When the call direction is a reply, copy the xid and call direction into the
req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns
rpc_garbage.

Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[get rid of CONFIG_NFSD_V4_1]
[sunrpc: refactoring of svc_tcp_recvfrom]
[nfsd41: sunrpc: create common send routine for the fore and the back channels]
[nfsd41: sunrpc: Use free_page() to free server backchannel pages]
[nfsd41: sunrpc: Document server backchannel locking]
[nfsd41: sunrpc: remove bc_connect_worker()]
[nfsd41: sunrpc: Define xprt_server_backchannel()[
[nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions]
[nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()]
[nfsd41: sunrpc: Don't auto close the server backchannel connection]
[nfsd41: sunrpc: Remove unused functions]
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: change bc_sock to bc_xprt]
[nfsd41: sunrpc: move struct rpc_buffer def into a common header file]
[nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex]
[removed cosmetic changes]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[sunrpc: add new xprt class for nfsv4.1 backchannel]
[sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel]
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
[reverted more cosmetic leftovers]
[got rid of xprt_server_backchannel]
[separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Cc: Trond Myklebust <trond.myklebust@netapp.com>
[sunrpc: change idle timeout value for the backchannel]
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Acked-by: Trond Myklebust <trond.myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-11 15:04:16 -04:00
Ricardo Labiaga dd2b63d049 nfs41: Rename rq_received to rq_reply_bytes_recvd
The 'rq_received' member of 'struct rpc_rqst' is used to track when we
have received a reply to our request.  With v4.1, the backchannel
can now accept callback requests over the existing connection.  Rename
this field to make it clear that it is only used for tracking reply bytes
and not all bytes received on the connection.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17 14:11:40 -07:00
Rahul Iyer 343952fa5a nfs41: Get the rpc_xprt * from the rpc_rqst instead of the rpc_clnt.
Obtain the rpc_xprt from the rpc_rqst so that calls and callback replies
can both use the same code path.  A client needs the rpc_xprt in order
to reply to a callback.

Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17 14:11:34 -07:00
Ricardo Labiaga 55ae1aabfb nfs41: Add backchannel processing support to RPC state machine
Adds rpc_run_bc_task() which is called by the NFS callback service to
process backchannel requests.  It performs similar work to rpc_run_task()
though "schedules" the backchannel task to be executed starting at the
call_trasmit state in the RPC state machine.

It also introduces some miscellaneous updates to the argument validation,
call_transmit, and transport cleanup functions to take into account
that there are now forechannel and backchannel tasks.

Backchannel requests do not carry an RPC message structure, since the
payload has already been XDR encoded using the existing NFSv4 callback
mechanism.

Introduce a new transmit state for the client to reply on to backchannel
requests.  This new state simply reserves the transport and issues the
reply.  In case of a connection related error, disconnects the transport and
drops the reply.  It requires the forechannel to re-establish the connection
and the server to retransmit the request, as stated in NFSv4.1 section
2.9.2 "Client and Server Transport Behavior".

Note: There is no need to loop attempting to reserve the transport.  If EAGAIN
is returned by xprt_prepare_transmit(), return with tk_status == 0,
setting tk_action to call_bc_transmit.  rpc_execute() will invoke it again
after the task is taken off the sleep queue.

[nfs41: rpc_run_bc_task() need not be exported outside RPC module]
[nfs41: New call_bc_transmit RPC state]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: No need to loop in call_bc_transmit()]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[rpc_count_iostats incorrectly exits early]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Convert rpc_reply_expected() to inline function]
[Remove unnecessary BUG_ON()]
[Rename variable]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17 14:11:24 -07:00
Ricardo Labiaga f9acac1a47 nfs41: Initialize new rpc_xprt callback related fields
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17 13:06:14 -07:00
Trond Myklebust f75e6745aa SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnect
See http://bugzilla.kernel.org/show_bug.cgi?id=13034

If the port gets into a TIME_WAIT state, then we cannot reconnect without
binding to a new port.

Tested-by: Petr Vandrovec <petr@vandrovec.name>
Tested-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 16:35:08 -07:00
Trond Myklebust 2a4919919a SUNRPC: Return EAGAIN instead of ENOTCONN when waking up xprt->pending
While we should definitely return socket errors to the task that is
currently trying to send data, there is no need to propagate the same error
to all the other tasks on xprt->pending. Doing so actually slows down
recovery, since it causes more than one tasks to attempt socket recovery.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:38:00 -04:00
Trond Myklebust c8485e4d63 SUNRPC: Handle ECONNREFUSED correctly in xprt_transmit()
If we get an ECONNREFUSED error, we currently go to sleep on the
'xprt->sending' wait queue. The problem is that no timeout is set there,
and there is nothing else that will wake the task up later.

We should deal with ECONNREFUSED in call_status, given that is where we
also deal with -EHOSTDOWN, and friends.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:59 -04:00
Tom Talpey 441e3e2429 SUNRPC: dynamically load RPC transport modules on-demand
Provide an api to attempt to load any necessary kernel RPC
client transport module automatically. By convention, the
desired module name is "xprt"+"transport name". For example,
when NFS mounting with "-o proto=rdma", attempt to load the
"xprtrdma" module.

Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:56 -04:00
Trond Myklebust 01d37c428a SUNRPC: xprt_connect() don't abort the task if the transport isn't bound
If the transport isn't bound, then we should just return ENOTCONN, letting
call_connect_status() and/or call_status() deal with retrying. Currently,
we appear to abort all pending tasks with an EIO error.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:09:39 -04:00
Denis V. Lunev c9f6cde6e2 sunrpc: do not pin sunrpc module in the memory
Basically, try_module_get here are pretty useless. Any other module using
this API will pin sunrpc in memory due using exported symbols.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07 18:14:54 -04:00
Chuck Lever b22602a673 SUNRPC: Ensure all transports set rq_xtime consistently
The RPC client uses the rq_xtime field in each RPC request to determine the
round-trip time of the request.  Currently, the rq_xtime field is
initialized by each transport just before it starts enqueing a request to
be sent.  However, transports do not handle initializing this value
consistently; sometimes they don't initialize it at all.

To make the measurement of request round-trip time consistent for all
RPC client transport capabilities, pull rq_xtime initialization into the
RPC client's generic transport logic.  Now all transports will get a
standardized RTT measure automatically, from:

  xprt_transmit()

to

  xprt_complete_rqst()

This makes round-trip time calculation more accurate for the TCP transport.
The socket ->sendmsg() method can return "-EAGAIN" if the socket's output
buffer is full, so the TCP transport's ->send_request() method may call
the ->sendmsg() method repeatedly until it gets all of the request's bytes
queued in the socket's buffer.

Currently, the TCP transport sets the rq_xtime field every time through
that loop so the final value is the timestamp just before the *last* call
to the underlying socket's ->sendmsg() method.  After this patch, the
rq_xtime field contains a timestamp that reflects the time just before the
*first* call to ->sendmsg().

This is consequential under heavy workloads because large requests often
take multiple ->sendmsg() calls to get all the bytes of a request queued.
The TCP transport causes the request to sleep until the remote end of the
socket has received enough bytes to clear space in the socket's local
output buffer.  This delay can be quite significant.

The method introduced by this patch is a more accurate measure of RTT
for stream transports, since the server can cause enough back pressure
to delay (ie increase the latency of) requests from the client.

Additionally, this patch corrects the behavior of the RDMA transport, which
entirely neglected to initialize the rq_xtime field.  RPC performance
metrics for RDMA transports now display correct RPC request round trip
times.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <thomas.talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:15 -04:00
Chuck Lever cd983ef81b SUNRPC: Remove obsolete messages during transport connect
Recent changes to the RPC client's transport connect logic make connect
status values ECONNREFUSED and ECONNRESET impossible.

Clean up xprt_connect_status() to account for these changes.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:06 -04:00
Linus Torvalds 77a50df2b1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Allow building iwl3945 without iwl4965.
  wireless: Fix compile error with wifi & leds
  tcp: Fix slab corruption with ipv6 and tcp6fuzz
  ipv4/ipv6 compat: Fix SSM applications on 64bit kernels.
  [IPSEC]: Use digest_null directly for auth
  sunrpc: fix missing kernel-doc
  can: Fix copy_from_user() results interpretation
  Revert "ipv6: Fix typo in net/ipv6/Kconfig"
  tipc: endianness annotations
  ipv6: result of csum_fold() is already 16bit, no need to cast
  [XFRM] AUDIT: Fix flowlabel text format ambibuity.
2008-04-28 09:44:11 -07:00
Randy Dunlap 0b80ae4201 sunrpc: fix missing kernel-doc
Fix missing sunrpc kernel-doc:

Warning(linux-2.6.25-git7//net/sunrpc/xprt.c:451): No description found for parameter 'action'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-27 14:26:52 -07:00
Trond Myklebust 7c1d71cf56 SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests
NFSv4 requires us to ensure that we break the TCP connection before we're
allowed to retransmit a request. However in the case where we're
retransmitting several requests that have been sent on the same
connection, we need to ensure that we don't interfere with the attempt to
reconnect and/or break the connection again once it has been established.

We therefore introduce a 'connection' cookie that is bumped every time a
connection is broken. This allows requests to track if they need to force a
disconnection.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19 16:55:12 -04:00
Trond Myklebust 636ac43318 SUNRPC: Remove the unused export of xprt_force_disconnect
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19 16:55:08 -04:00
Trond Myklebust 1e799b673c SUNRPC: Fix read ordering problems with req->rq_private_buf.len
We want to ensure that req->rq_private_buf.len is updated before
req->rq_received, so that call_decode() doesn't use an old value for
req->rq_rcv_buf.len.

In 'call_decode()' itself, instead of using task->tk_status (which is set
using req->rq_received) must use the actual value of
req->rq_private_buf.len when deciding whether or not the received RPC reply
is too short.

Finally ensure that we set req->rq_rcv_buf.len to zero when retrying a
request. A typo meant that we were resetting req->rq_private_buf.len in
call_decode(), and then clobbering that value with the old rq_rcv_buf.len
again in xprt_transmit().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19 16:53:20 -04:00
Trond Myklebust b6ddf64ffe SUNRPC: Fix up xprt_write_space()
The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether
or not we have someone waiting for buffer memory. Convert the SUNRPC layer
to use the same idiom.
Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In
fact, the most common case will be that there is nobody waiting for buffer
space.

SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was
limited by the application window. Ensure that we follow the same idiom as
the rest of the networking layer here too.

Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that
write_space() doesn't keep waking things up on xprt->pending.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19 16:52:44 -04:00
Trond Myklebust f6a1cc8930 SUNRPC: Add a (empty for the moment) destructor for rpc_wait_queues
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-28 23:17:27 -08:00
Trond Myklebust 5d00837b90 SUNRPC: Run rpc timeout functions as callbacks instead of in softirqs
An audit of the current RPC timeout functions shows that they don't really
ever need to run in the softirq context. As long as the softirq is
able to signal that the wakeup is due to a timeout (which it can do by
setting task->tk_status to -ETIMEDOUT) then the callback functions can just
run as standard task->tk_callback functions (in the rpciod/process
context).

The only possible border-line case would be xprt_timer() for the case of
UDP, when the callback is used to reduce the size of the transport
congestion window. In testing, however, the effect of moving that update
to a callback would appear to be minor.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25 21:40:44 -08:00
Trond Myklebust fda1393938 SUNRPC: Convert users of rpc_wake_up_task to use rpc_wake_up_queued_task
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25 21:40:42 -08:00
Trond Myklebust fde95c7554 SUNRPC: Clean up rpc_run_timer()
All RPC timeout callback functions are expected to wake the task up. We can
enforce this by moving the wakeup back into rpc_run_timer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25 21:40:39 -08:00
Randy Dunlap 65b6e42cdc docbook: sunrpc filenames and notation fixes
Use updated file list for docbook files and
fix kernel-doc warnings in sunrpc:
Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:689): No description found for parameter 'rpc_client'
Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:765): No description found for parameter 'flags'
Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:584): No description found for parameter 'tk_ops'
Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:618): No description found for parameter 'bufsize'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13 16:21:19 -08:00
Trond Myklebust ba7392bb37 SUNRPC: Add support for per-client timeout values
In order to be able to support setting the timeo and retrans parameters on
a per-mountpoint basis, we move the rpc_timeout structure into the
rpc_clnt.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:59 -05:00
Trond Myklebust 2881ae74e6 SUNRPC: Clean up the transport timeout initialisation
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:58 -05:00
Trond Myklebust e8914c65f7 SUNRPC: Restrict sunrpc client exports
The sunrpc client exports are not meant to be part of any official kernel
API: they can change at the drop of a hat. Mark them as internal functions
using EXPORT_SYMBOL_GPL.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:28 -05:00
Trond Myklebust a6eaf8bdf9 SUNRPC: Move exported declarations to the function declarations
Do this for all RPC client related functions and XDR functions.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:28 -05:00
Trond Myklebust 62da3b2488 SUNRPC: Rename xprt_disconnect()
xprt_disconnect() should really only be called when the transport shutdown
is completed, and it is time to wake up any pending tasks. Rename it to
xprt_disconnect_done() in order to reflect the semantical change.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:27 -05:00
Trond Myklebust 7272dcd31d SUNRPC: xprt_autoclose() should not call xprt_disconnect()
The transport layer should do that itself whenever appropriate.

Note that the RDMA transport already assumes that it needs to call
xprt_disconnect in xprt_rdma_close().
For TCP sockets, we want to call xprt_disconnect() only after the
connection has been closed by both ends.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:26 -05:00
Trond Myklebust 66af1e5585 SUNRPC: Fix a race in xs_tcp_state_change()
When scheduling the autoclose RPC call, we want to ensure that we don't
race against the test_bit() call in xprt_clear_locked().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:05:24 -05:00
Pavel Emelyanov b24b8a247f [NET]: Convert init_timer into setup_timer
Many-many code in the kernel initialized the timer->function
and  timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.

The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:35 -08:00
Jiri Slaby 5ba03e82b3 [SUNRPC]: Remove SPIN_LOCK_UNLOCKED
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 19:40:22 +08:00
\"Talpey, Thomas\ 4fa016eb24 NFS/SUNRPC: support transport protocol naming
To prepare for including non-sockets-based RPC transports, select
RPC transports by an identifier (to be used in following patches).

Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:17:50 -04:00
\"Talpey, Thomas\ 3c341b0b92 SUNRPC: rename the rpc_xprtsock_create structure
To prepare for including non-sockets-based RPC transports, change the
overly suggestive name of the transport creation arguments struct.

Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:17:45 -04:00
\"Talpey, Thomas\ bc25571e21 SUNRPC: Finish API to load RPC transport implementations dynamically
Allow RPC client transport implementations to be loaded as needed, or
as they become available from distributors or third-party vendors.

Note that we leave the IP sockets implementation in sunrpc.o
permanently, as IP functionality is always available in any
kernel that runs NFS.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:17:42 -04:00
\"Talpey, Thomas\ 81c098af3d SUNRPC: Provide a new API for registering transport implementations
To allow transport capabilities to be loaded dynamically, provide an API
for registering and unregistering the transports with the RPC client.
Eventually xprt_create_transport() will be changed to search the list of
registered transports when initializing a fresh transport.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:17:40 -04:00
\"Talpey, Thomas\ 1244480976 SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions

As a preface to allowing arbitrary transport modules to be loaded
dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions
that a transport implementation might want to use.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <tmt@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09 17:17:36 -04:00