In ca91cx42_slave_get function, the value pointed by vme_base pointer is
set through:
*vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]);
So it must be dereferenced to be used in calculation of pci_base:
*pci_base = (dma_addr_t)*vme_base + pci_offset;
This bug was caught thanks to the following gcc warning:
drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’:
drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
*pci_base = (dma_addr_t)vme_base + pci_offset;
Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com>
Acked-By: Martyn Welch <martyn@welchs.me.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These drivers have a PCI device ID table but the PCI module
alias information is not created so module autoloading won't work.
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the location monitor callback function prototype more useful by
changing the argument from an integer to a void pointer.
All VME bridge drivers were simply passing the location monitor index
(e.g. 0-3) as the argument to these callbacks. It is much more useful
to pass back a pointer to data that the callback-registering driver
cares about.
There appear to be no in-kernel callers of vme_lm_attach (or
vme_lme_request for that matter), so this change only affects the VME
subsystem and bridge drivers.
This has been tested with Tsi148 hardware, but the CA91Cx42 changes
have only been compiled.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Consolidate vme_bridge structure setup that every bridge was required
to do itself. This came about because .irq_mtx is only used within the
VME core, but was required to be setup externally.
This returns the structure passed in to support shorthand like this:
bridge = vme_init_bridge(&priv->bridge);
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current VME bus error handler adds errors to the bridge error list.
vme_master_{read,write} then traverses that list to look for relevant
errors.
Such scheme didn't work well for accesses going through vme_master_mmap
because they would also allocate a vme_bus_error, but have no way to do
vme_clear_errors call to free that memory.
This changes the error handling process to be other way around: now
vme_master_{read,write} defines a window in VME address space that will
catch possible errors. VME bus error interrupt only traverses these
windows and marks those that had errors in them.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Universe II allows PCI address grannularity of 4K or 64K depending on
the window id. tsi148 only supports 64K. Existing driver implementations
are validating window size against this grannularity and then use that
very size as alignment parameter to pci_bus_alloc_resource. This
constraint is excessive, alignment by granularity should be enough.
This changes alignment constraint from size to a fixed constraint of
64K.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ca91cx42 and tsi148 VME bridges use the width of reads and writes on the
PCI bus in part to control the width of the cycles on the VME bus. It is
important that we can control the width of cycles on the VME bus as some VME
hardware requires cycles of a specific width. The memcpy_toio() and
memcpy_fromio() functions do not provide sufficient control, so instead loop
using ioread functions.
Reported-by: Michael Kenney <mfkenney@gmail.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to ensure the correct width cycles on the VME bus, the VME bridge
drivers implement an algorithm to utilise the largest possible width reads and
writes whilst maintaining natural alignment constraints. The algorithm
currently looks at the start address rather than the current read/write address
when determining whether a 16-bit width cycle is required to get to 32-bit
alignment. This results in incorrect alignment,
Reported-by: Jim Strouth <james.strouth@ge.com>
Tested-by: Jim Strouth <james.strouth@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we will be removing items off the list using list_del() we need
to use a safer version of the list_for_each() macro aptly named
list_for_each_safe(). We should use the safe macro if the loop
involves deletions of items.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.
Quiets the sparse warnings:
warning: symbol 'ca91cx42_alloc_consistent' was not declared. Should it be static?
warning: symbol 'ca91cx42_free_consistent' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves the VME core, VME board drivers, and VME bridge drivers out
of the drivers/staging/vme/ area to drivers/vme/.
The VME device drivers have not moved out yet due to some API questions
they are still working through, that should happen soon, hopefully.
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Vincent Bossier <vincent.bossier@gmail.com>
Cc: "Emilio G. Cota" <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Augusto Mecking Caringi
Alessio Igor Bogani
Aaron Sierra
Geliang Tang
Dmitry Kalinkin
Joe Perches
Greg Kroah-Hartman
Martyn Welch
Jingoo Han
Wei Yongjun
H Hartley Sweeten