Commit Graph

311 Commits

Author SHA1 Message Date
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Christoph Hellwig 7ad19a99ad ide: officially deprecated the legacy IDE driver
After a recent chat with Dave we agreed to try to finally kill off the
legacy IDE code base.  Set a two year grace period in which we try
to move everyone over.  There are a few pieces of hardware not
supported by libata yet, but for many of them we aren't even sure
if there are any users.  For those that have users we have usually
found a volunteer to add libata support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08 16:47:23 -07:00
Jens Axboe 9a6d548800 ide: ensure atapi sense request aren't preempted
There's an issue with how sense requests are handled in IDE. If ide-cd
encounters an error, it queues a sense request. With how IDE request
handling is done, this is the next request we need to handle. But it's
impossible to guarantee this, as another request could come in between
the sense being queued, and ->queue_rq() being run and handling it. If
that request ALSO fails, then we attempt to doubly queue the single
sense request we have.

Since we only support one active request at the time, defer request
processing when a sense request is queued.

Fixes: 600335205b "ide: convert to blk-mq"
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-31 08:25:09 -07:00
Jens Axboe d16a67667c ide: don't clear special on ide_queue_rq() entry
We can't use RQF_DONTPREP to see if we should clear ->special,
as someone could have set that while inserting the request. Make
sure we clear it in our ->initialize_rq_fn() helper instead.

Fixes: 22ce0a7ccf ("ide: don't use req->special")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12 17:19:32 -07:00
Jens Axboe 600335205b ide: convert to blk-mq
ide-disk and ide-cd tested as working just fine, ide-tape and
ide-floppy haven't. But the latter don't require changes, so they
should work without issue.

Add helper function to insert a request from a work queue, since we
cannot invoke the blk-mq request insertion from IRQ context.

Cc: David Miller <davem@davemloft.net>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:31 -07:00
Gustavo A. R. Silva a2eed33dcd ide: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13 11:48:54 -07:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Christoph Hellwig 164c3d0912 ide: remove the PCI_DMA_BUS_IS_PHYS check
We now have ways to deal with drainage in the block layer, and libata has
been using it for ages.  We also want to get rid of PCI_DMA_BUS_IS_PHYS
now, so just reduce the PCI transfer size for ide - anyone who cares for
performance on PCI controllers should have switched to libata long ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-05-07 07:15:41 +02:00
Christoph Hellwig 1d3b9917df ide: kill ide_toggle_bounce
ide_toggle_bounce did select various strange block bounce limits, including
not bouncing at all as soon as an iommu is present in the system.  Given
that the dma_map routines now handle any required bounce buffering except
for ISA DMA, and the ide code already must handle either ISA DMA or highmem
at least for iommu equipped systems we can get rid of the block layer
bounce limit setting entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-05-07 07:15:41 +02:00
Bart Van Assche 8b904b5b6b block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()
This patch has been generated as follows:

for verb in set_unlocked clear_unlocked set clear; do
  replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
    $(git grep -lw queue_flag_${verb} drivers block/bsg*)
done

Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08 14:13:48 -07:00
Bart Van Assche 5ee0524ba1 block: Add 'lock' as third argument to blk_alloc_queue_node()
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-28 12:23:35 -07:00
Jan Kara 3079c22ea8 genhd: Rename get_disk() to get_disk_and_module()
Rename get_disk() to get_disk_and_module() to make sure what the
function does. It's not a great name but at least it is now clear that
put_disk() is not it's counterpart.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26 09:48:42 -07:00
Linus Torvalds 2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Kees Cook 10738ba8e0 ide: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:50:03 -08:00
Bartlomiej Zolnierkiewicz d410a6417e ide: free hwif->portdev on hwif_init() failure
Recent pci_assign_irq() changes uncovered a problem with missing freeing of
ide_port class instance on hwif_init() failure in ide_host_register():

  ide0: disabled, no IRQ
  ide0: failed to initialize IDE interface
  ide0: disabling port
  cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
  CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io  0x8050-0x8057]
  cmd64x 0000:00:02.0: can't reserve resources
  CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
  ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
  sysfs: cannot create duplicate filename '/class/ide_port/ide0'
  ...

  Trace:
  [<fffffc00003308a0>] __warn+0x160/0x190
  [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
  [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
  [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
  [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
  [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
  [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
  [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
  [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
  [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
  [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
  [<fffffc00005ba690>] device_create+0x50/0x70
  [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
  [<fffffc00005df330>] ide_host_register+0x450/0xa00
  [<fffffc00005ba2a0>] device_register+0x20/0x50
  [<fffffc00005df330>] ide_host_register+0x450/0xa00
  [<fffffc00005df944>] ide_host_add+0x64/0xe0
  [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
  [<fffffc0000310288>] do_one_initcall+0x68/0x260
  [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
  [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
  [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
  [<fffffc00007b13a0>] kernel_init+0x0/0x1a0

  ---[ end trace 24a70433c3e4d374 ]---
  ide0: disabling port

Fix the problem by adding missing code to ide_host_register().

Fixes: 30fdfb929e ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb75 ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[bhelgaas: add Fixes:]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
2017-10-03 13:36:17 -05:00
Bart Van Assche c8d9cf22cf block: Change argument type of scsi_req_init()
Since scsi_req_init() works on a struct scsi_request, change the
argument type into struct scsi_request *.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20 19:27:14 -06:00
Bart Van Assche ca18d6f769 block: Make most scsi_req_init() calls implicit
Instead of explicitly calling scsi_req_init() after blk_get_request(),
call that function from inside blk_get_request(). Add an
.initialize_rq_fn() callback function to the block drivers that need
it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn()
because it is too small to keep it as a separate function. Keep the
scsi_req_init() call in ide_prep_sense() because it follows a
blk_rq_init() call.

References: commit 82ed4db499 ("block: split scsi_request out of struct request")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20 19:27:14 -06:00
Bart Van Assche 9efc160f4b block: Introduce queue flag QUEUE_FLAG_SCSI_PASSTHROUGH
From the context where a SCSI command is submitted it is not always
possible to figure out whether or not the queue the command is
submitted to has struct scsi_request as the first member of its
private data. Hence introduce the flag QUEUE_FLAG_SCSI_PASSTHROUGH.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01 13:10:40 -06:00
Geliang Tang 1a1df90ae1 ide: use setup_timer
Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 17:36:39 -04:00
Christoph Hellwig 82ed4db499 block: split scsi_request out of struct request
And require all drivers that want to support BLOCK_PC to allocate it
as the first thing of their private data.  To support this the legacy
IDE and BSG code is switched to set cmd_size on their queues to let
the block layer allocate the additional space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Hannes Reinecke 27f00e53af ide,ata: Rename ATA_IDX to ATA_SENSE
ATA-8 defines bit 1 as 'ATA_SENSE', not 'ATA_IDX'.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Michael Schmitz a259d53205 m68k/atari - ide: do not register interrupt if host->get_lock is set
On m68k, host->get_lock is used to both lock and register the interrupt
that the IDE host shares with other device drivers. Registering the
IDE interrupt handler in ide-probe.c results in duplicating the
interrupt registered (once via host->get lock, and also via init_irq()),
and may result in IDE accepting interrupts even when another driver has
locked the interrupt hardware. This opens the whole locking scheme up
to races.

host->get_lock is set on m68k only, so other drivers' behaviour is not
changed.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04 15:58:31 -05:00
Kees Cook 02aa2a3763 drivers: avoid format string in dev_set_name
Calling dev_set_name with a single paramter causes it to be handled as a
format string.  Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents,
including wrappers like device_create*() and bdi_register().

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:41 -07:00
Wolfram Sang dbee032295 ide: Fix ordering of procfs registry.
We must ensure that ide_proc_port_register_devices() occurs on an
interface before ide_proc_register_driver() executes for that
interfaces drives.

Therefore defer the registry of the driver device objects backed by
ide_bus_type until after ide_proc_port_register_devices() has run
and thus all of the drive->proc procfs directory pointers have been
setup.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13 21:34:25 -07:00
David S. Miller 9ce41aed0d Revert "ide: skip probe if there are no devices on the port (v2)"
This reverts commit a20b2a44ec.

As requested by David Fries.  This makes CDROMs which are slave drives
on a ribbon without a master disappear and causes other similar kinds
of badness.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-28 18:58:28 -07:00
Linus Torvalds 4c10c937cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: (49 commits)
  drivers/ide: Fix continuation line formats
  ide: fixed section mismatch warning in cmd640.c
  ide: ide_timing_compute() fixup
  ide: make ide_get_best_pio_mode() static
  via82cxxx: use ->pio_mode value to determine pair device speed
  tx493xide: use ->pio_mode value to determine pair device speed
  siimage: use ->pio_mode value to determine pair device speed
  palm_bk3710: use ->pio_mode value to determine pair device speed
  it821x: use ->pio_mode value to determine pair device speed
  cs5536: use ->pio_mode value to determine pair device speed
  cs5535: use ->pio_mode value to determine pair device speed
  cmd64x: fix handling of address setup timings
  amd74xx: use ->pio_mode value to determine pair device speed
  alim15x3: fix handling of UDMA enable bit
  alim15x3: fix handling of DMA timings
  alim15x3: fix handling of command timings
  alim15x3: fix handling of address setup timings
  ide-timings: use ->pio_mode value to determine fastest PIO speed
  ide: change ->set_dma_mode method parameters
  ide: change ->set_pio_mode method parameters
  ...
2010-03-04 08:24:06 -08:00
Martin K. Petersen 8a78362c4e block: Consolidate phys_segment and hw_segment limits
Except for SCSI no device drivers distinguish between physical and
hardware segment limits.  Consolidate the two into a single segment
limit.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
Martin K. Petersen 086fa5ff08 block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors
The block layer calling convention is blk_queue_<limit name>.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.

Also introduce a temporary wrapper for backwards compability.  This can
be removed after the merge window is closed.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
Bartlomiej Zolnierkiewicz d2d4e780af ide: add drive->pio_mode field
Add pio_mode field to ide_drive_t matching pio_mode field used in
struct ata_device.

The validity of the field is restricted to ->set_pio_mode method
only currently in IDE subsystem.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:42:00 -08:00
David S. Miller 0fb18c4777 Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Ok, we really do need to revert this, even with Bart's sis5513.c
fix in there.

The problem is that several driver's ->set_pio_mode() method
depends upon the drive->media type being set properly.  Most
of them use this to enable prefetching, which can only be done
for disk media.

But the commit being reverted here calls ->set_pio_mode() before
it's setup.  Actually it considers everything disk because that
is the default media type set by ide_port_init_devices_data().

The set of drivers that depend upon the media type in their
->set_pio_method() are:

drivers/ide/alim15x3.c
drivers/ide/it8172.c
drivers/ide/it8213.c
drivers/ide/pdc202xx_old.c
drivers/ide/piix.c
drivers/ide/qd65xx.c
drivers/ide/sis5513.c
drivers/ide/slc90e66.c

And it is possible that we could fix this by guarding the prefetching
and other media dependent setting changes with a test on
IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for
2.6.32-rcX and -stable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 04:52:50 -08:00
Bartlomiej Zolnierkiewicz 032665a26f Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
This reverts commit 24df31acaf.

The root cause of reported system hangs was (now fixed) sis5513 bug
and not "ide: try to use PIO Mode 0 during probe if possible" change
(commit 6029336426) so the revert was
incorrect (it simply replaced one regression with the other one).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 04:07:18 -07:00
David S. Miller 24df31acaf Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Based upon a report by David Fries, wherein his system hangs
on bootup with sis5513 controller, right after the CDROM
is registered by ide-cd.c and the TOC is first read.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04 21:00:17 -07:00
Joe Perches a419aef8b8 trivial: remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:58 +02:00
Bartlomiej Zolnierkiewicz fa56d4cb40 ide: allow ide_dev_read_id() to be called from the IRQ context
* Un-static __ide_wait_stat().

* Allow ide_dev_read_id() helper to be called from the IRQ context by
  adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed.

* Switch ide_driveid_update() to set irq_ctx flag.

This change is needed for the consecutive patch which fixes races in
handling of user-space SET XFER commands but for improved bisectability
and clarity it is better to do it in a separate patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Bartlomiej Zolnierkiewicz ffc36c7610 ide: fix handling of unexpected IRQs vs request_irq()
Add ide_host_enable_irqs() helper and use it in ide_host_register()
before registering ports.  Then remove no longer needed IRQ unmasking
from in init_irq().

This should fix the problem with "screaming" shared IRQ on the first
port (after request_irq() call while we have the unexpected IRQ pending
on the second port) which was uncovered by my rework of the serialized
interfaces support.

Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:30 -07:00
Linus Torvalds e6423407d0 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits)
  ide-cd: prevent null pointer deref via cdrom_newpc_intr
  ide: BUG() on unknown requests
  ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
  ide: do not access ide_drive_t 'drive_data' field directly
  sl82c105: implement test_irq() method
  siimage: implement test_irq() method
  pdc202xx_old: implement test_irq() method (take 2)
  cmd64x: implement test_irq() method
  cmd640: implement test_irq() method
  ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
  ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
  siimage: use ide_dma_test_irq() (take 2)
  cmd64x: implement clear_irq() method (take 2)
  ide: call clear_irq() method in ide_timer_expiry()
  sgiioc4: coding style cleanup
  ide: don't enable IORDY at a probe time
  ide: IORDY handling fixes
  ata: add ata_id_pio_need_iordy() helper (v2)
  ide-tape: fix build issue
  ide: unify interrupt reason checking
  ...
2009-06-20 10:11:11 -07:00
Greg Kroah-Hartman fcb5207723 ide: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: linux-ide@vger.kernel.org
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Sergei Shtylyov f4d3ffa52a ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00
Bartlomiej Zolnierkiewicz 5880b5de71 ide: don't enable IORDY at a probe time
* Add 'unsigned long port_flags' field to ide_hwif_t.

* Add IDE_PFLAG_PROBING port flag and keep it set during probing.

* Fix ide_pio_need_iordy() to not enable IORDY at a probe time
  (IORDY may lead to controller lock up on certain controllers
   if the port is not occupied).

Loosely based on the recent libata's fix by Tejun, thanks to Alan
for the hint that IDE may also need it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:54 +02:00
Hugh Dickins 5f4417a156 ide: fix PowerMac bootup oops
PowerMac bootup with CONFIG_IDE=y oopses in ide_pio_cycle_time():
because "ide: try to use PIO Mode 0 during probe if possible" causes
pmac_ide_set_pio_mode() to be called before drive->id has been set.

Bart points out other places which now need drive->id set earlier,
so follow his advice to allocate it in ide_port_alloc_devices()
(using kzalloc_node, without error message, as when allocating drive)
and memset it for reuse in ide_port_init_devices_data().

Fixed in passing: ide_host_alloc() was missing ide_port_free_devices()
from an error path.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-10 14:37:20 +02:00
Bartlomiej Zolnierkiewicz a20b2a44ec ide: skip probe if there are no devices on the port (v2)
In ide_probe_port() skip probe if ide_port_wait_ready() returns -ENODEV
and print error message instead of debug one if it returns -EBUSY.

v2:
Fix the default 'rc' value.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-08 22:07:28 +02:00
Bartlomiej Zolnierkiewicz 8bc1e5aa06 ide: respect quirk_drives[] list on all controllers
* Add ide_check_nien_quirk_list() helper to the core code
  and then use it in ide_port_tune_devices().

* Remove no longer needed ->quirkproc methods from hpt366.c
  and pdc202xx_{new,old}.c.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:09 +02:00
Bartlomiej Zolnierkiewicz 4c9773ed79 Merge branch 'for-linus' into for-next 2009-05-22 17:10:55 +02:00
Bartlomiej Zolnierkiewicz 28ee9bc5cc ide: report timeouts in ide_busy_sleep()
* change 'hwif' argument to 'drive'
* report an error on timeout

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:38 +02:00
Bartlomiej Zolnierkiewicz 9f36d31437 ide: remove hw_regs_t typedef
Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:25 +02:00
Bartlomiej Zolnierkiewicz dca3983059 ide: pass number of ports to ide_host_{alloc,add}() (v2)
Pass number of ports to ide_host_{alloc,add}() and then update
all users accordingly.

v2:
- drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c
  (noticed by Sergei)

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:24 +02:00
Bartlomiej Zolnierkiewicz 29e52cf793 ide: remove chipset field from hw_regs_t
* Convert host drivers that still use hw_regs_t's chipset field to use
  the one in struct ide_port_info instead.

* Move special handling of ide_pci chipset type from ide_hw_configure()
  to ide_init_port().

* Remove chipset field from hw_regs_t.

While at it:
- remove stale comment in delkin_cb.c

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:22 +02:00
Bartlomiej Zolnierkiewicz ca1b96e00a ide: replace special_t typedef by IDE_SFLAG_* flags
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' one

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:21 +02:00
Joao Ramos 6029336426 ide: try to use PIO Mode 0 during probe if possible
Initially set PIO Mode 0 for all host drivers that have a 'set_pio_mode'
method before the IDE core figures out the most suited PIO mode for the
attached device.

Signed-off-by: Joao Ramos <joao.ramos@inov.pt>
Cc: Sergei Shtylyov <sshtylyov@ru.montavista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 17:22:54 +02:00