Commit Graph

617 Commits

Author SHA1 Message Date
Eric Benard b94ca0792d at91: merge all at91rm9200 defconfig in one single file
About all options present in each file are activated
in the single file.

Signed-off-by: Eric Benard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30 10:59:15 +01:00
Russell King 9ae21ca362 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2010-10-28 11:13:00 +01:00
Dinh Nguyen f2d36ecbca ARM: mx5: Add gpio-keys to mx51 babbage board
Add functionality for the power button on MX51 Babbage board.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 16:24:05 +02:00
Peter Gsellmann abf0c1bc94 AT91: add board support for Pcontrol_G20
Board is a carrier board for Stamp9G20, with additional peripherals
for a building automation system

Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at>
[nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Linus Torvalds 7b6181e068 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25 13:46:56 -07:00
Kevin Hilman 7940a34b2e Merge branch 'davinci-next' into davinci-for-linus
Conflicts:
	arch/arm/mach-davinci/board-da830-evm.c
	arch/arm/mach-davinci/board-da850-evm.c
2010-10-21 11:21:55 -07:00
Russell King 809b4e00ba Merge branch 'devel-stable' into devel 2010-10-19 22:06:36 +01:00
Russell King f779b7dd32 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/mach-at91/include/mach/system.h
	arch/arm/mach-imx/mach-cpuimx27.c

AT91 conflict resolution:
Acked-by: Anders Larsen <al@alarsen.net>
IMX conflict resolution confirmed by Uwe Kleine-König.
2010-10-19 20:12:24 +01:00
Russell King 23beab76b4 Merge branches 'at91', 'dcache', 'ftrace', 'hwbpt', 'misc', 'mmci', 's3c', 'st-ux' and 'unwind' into devel 2010-10-18 22:34:25 +01:00
Kukjin Kim b7df2a7beb ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450
This patch updates s5p64x0_defconfig and changes the name from
s5p6440_defconfig so that can support S5P6440 and S5P6450 with
one kernel.

Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450).

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18 18:33:04 +09:00
Russell King 4af8f24d99 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into devel-stable 2010-10-12 20:11:18 +01:00
Russell King c9ee46a910 Merge branch 'for-rmk-next' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2010-10-11 17:30:44 +01:00
Tony Lindgren 6f911492ed omap: Update omap2plus_defconfig to use ttyO instead ttyS
With the omap-serial the device has changed from ttyS to ttyO as
the system may have both omap-serial and 8250 ports.

Note that systems using omap-serial need to be updated to use ttyO[012]
instead of ttyS[012] in the bootloader, CONFIG_CMDLINE, /etc/inittab,
and the root file system with mknod. Also you may need to add ttyO[012]
to /etc/securetty.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 10:23:44 -07:00
Linus Walleij 2da6d64a63 ARM: 6369/1: Update RealView SMP defconfig
This patches the condensed RealView SMP defconfig activating the
same 2.6.36 features mentioned in the vanilla RealView defconfig patch
submitted earlier.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-08 10:02:26 +01:00
Linus Walleij 6a7d520fc1 ARM: 6365/1: Update RealView defconfig
This patches the condensed RealView defconfig activating some
stuff that has been missing from this config for some time and
some stuff that was merged in the 2.6.36 merge window:

- The new character LCD driver is enabled
- The Versatile I2C is enabled
- The PL022 SPI driver is enabled
- gpiolib is enabled (and makes MMC detection work properly)
- The new LEDs code is enabled with a heartbeat trigger
- The RTC class is enabled, and the PL031 RTC (onchip) and
  the offchip DS1307 on I2C is enabled

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-08 10:02:25 +01:00
Jean-Christophe PLAGNIOL-VILLARD a6e016f19d AT91: at91sam9g20ek: merge 2mmc version in one board
The board-sam9g20ek-2slot-mmc.c was a revision of the at91sam9g20ek
since board revision C. It contains 2 sd/mmc slots.

This merge keep the support of the old machine ID
MACH_AT91SAM9G20EK_2MMC for backward compatibility.

Now we use the ATAG to pass the hardware functionality to kernel
with this board revision encoding
 bit 0:
     0 => 1 sd/mmc slot
     1 => 2 sd/mmc slots connectors (board from revision C)

system_rev tested on Barebox commit d8f3ee103a9f4bd

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-07 19:56:31 +02:00
Linus Walleij 100642c7b6 ARM: 6366/1: Update U300 defconfig
This mainly removes a lot of unused subsystems (as for the mainline
drivers) in the U300 defconfig, switch of MMC debugging by default
and enables debugfs on the builds. Once we merge the drivers we'll
configure it on again.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:53:32 +01:00
Kevin Hilman 7ad0e386d4 OMAP2+: defconfig: disable CPUfreq
Disable CPUfreq since

1) is not yet supported in mainline, and
2) the current driver fails to suspend properly

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 10:39:02 -07:00
Kevin Hilman ecfdd76d2f OMAP2+: defconfig: modularize bluetooth, audio and WLAN
In working towards a smaller default kernel, only devices used for
early boot should be built in.  Toward that end, build the following
as modules by default:

- bluetooth
- audio: ALSA, ASoC
- WLAN

Uncompressed kernel size comparison:

Before:
   text	   data	    bss	    dec	    hex	filename
6557576	 465088	5616024	12638688	 c0d9e0	vmlinux

After:
   text	   data	    bss	    dec	    hex	filename
5616572	 436448	5610800	11663820	 b1f9cc	vmlinux

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 10:35:34 -07:00
Uwe Kleine-König 6470310865 ARM: mx51_defconfig: add new boards MACH_MX51_3DS and MACH_EUKREA_CPUIMX51
Further remove FIXED_PHY as it breaks the ethernet.
VGA_CONSOLE isn't selectable anymore since fb78b51cb1.
EXT3_DEFAULTS_TO_ORDERED defaults to y since aa32a79638.
INOTIFY is gone since 2dfc1cae4c.
CONFIG_DETECT_SOFTLOCKUP is gone since e16bb1d7fe.
Enable TMPFS for udev.
KEYS is selected by NFS_USE_KERNEL_DNS

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:06 +02:00
Uwe Kleine-König ea9a9b2ba2 ARM: remove mx31pdk_defconfig
This machine is enabled in mx3_defconfig and so mx31pdk_defconfig isn't
really useful.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:06 +02:00
Uwe Kleine-König 801561cdda ARM: mx3_defconfig: add new machine MACH_EUKREA_CPUIMX35
Furthermore INOTIFY is gone since

	2dfc1ca (inotify: remove inotify in kernel interface)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:05 +02:00
Uwe Kleine-König 0ac15c884e ARM: mx27_defconfig: enable switches used in mx27 code
- enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10,
  MACH_PCA100, MACH_MXT_TD60) including optional features for
  CPUIMX27
- eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846
- mach-cpuimx27.c uses SERIAL_8250
- several machines make use of SPI_IMX (selects SPI_BITBANG)
- drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb1
- several machines make use of USB_ULPI (depends on USB, but don't
  enable USB_DEVICE_CLASS as it's deprecated)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:04 +02:00
Victor Rodriguez 6c18c91b3a davinci: Initial support for Omapl138-Hawkboard
This patch adds initial support for the Hawkboard-L138 system
It is under the machine name "omapl138_hawkboard".
This system is based on the da850 davinci CPU architecture.
Information on these system may be found at http://www.hawkboard.org.
Basic support for the UART console is included in this patch.
It's tested with latest Angstrom File Systems like ramdisk
from http://alturl.com/imb45.

Signed-off-by: Victor Rodriguez <victor.rodriguez@sasken.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24 07:40:32 -07:00
Michael Williamson f2dbb6d91b davinci: Initial support for MityDSP-L138/MityARM-1808
This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system
on Module (SOM) under the machine name "mityomapl138".  These SOMs are based
on the da850 davinci CPU architecture.  Information on these SOMs may be
found at http://www.mitydsp.com.

Basic support for the console UART, NAND, and EMAC (MII interface) is
included in this patch.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24 07:40:28 -07:00
Michael Williamson 9c6fbbee8d davinci: Add CONFIG_REGULATOR_DUMMY to DA8XX defconfig file.
In order to support reference DA8XX machines not providing a
voltage regulator control for the core voltage, the REGULATOR_DUMMY
option is required.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24 07:40:28 -07:00
Tony Lindgren d31f59f31d omap: Update omap3_defconfig for omap2
We need to enable ARM_ERRATA_411920 for omap2 and
remove the omap2 specific defconfigs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-20 14:58:46 -07:00
Santosh Shilimkar 455d4d2dc7 omap: Update and rename common defconfig for omap2plus devices
This patch addresses below things

- Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds
  enabled to more appropriate name 'omap2plus_defconfig'
- L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous
  OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For
  OMAP3 only build the shift would be still 6
- Enable needed Errata's for OMAP4 to work with DMA based device drivers
	CONFIG_PL310_ERRATA_588369=y
	CONFIG_ARM_ERRATA_720789=y
- Enable the Micrel ethernet controller
	CONFIG_KS8851=y
	CONFIG_KS8851_MLL=y

With above three changes, OMAP4 ethernet, mmc etc works reliably.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-20 14:58:09 -07:00
Tony Lindgren 61e9beafdd omap: Update omap3_defconfig to work with SMP_ON_UP
With the recent changes to core ARM kernel code, we can now
boot SMP kernel on UP systems. Update omap3_defconfig to
enable SMP. This allows us to remove omap_4430sdp_defconfig.

In addition to enabling SMP, we also need to disable some
options to make the system boot:

- For some reason LOCK_STAT causes tons of
  WARNING: at mm/percpu-vm.c:320 pcpu_alloc+0x2fc/0x888()
  so disable it for now.

- MUSB init fails for multi-omap, disable it for now.

- LOCAL_TIMERS hangs on omap4, disable it for now.

Also disable DEBUG_LL as this should be only enabled for
debugging.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-20 14:53:38 -07:00
Eric Cooper 709406494c [ARM] Kirkwood: support for Seagate DockStar
This patch adds support for the Seagate FreeAgent DockStar,
a Marvell SheevaPlug variant.

Signed-off-by: Eric Cooper <ecc@cmu.edu>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 22:43:44 -04:00
Tony Lindgren c66dd2660d omap: Fix omap_4430sdp_defconfig for make oldconfig
Commit ffb63e3402 changed
Kconfig to select support for omap2, 3 and 4 by default.

However, CONFIG_SMP won't currently work properly on
uniprocessor ARMs, or if support for earlier ARM cores
is selected in.

Fix this by updating omap_4430sdp_defconfig to not
select omap2 or 3 at this point.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-08-16 09:22:04 +03:00
Russell King 0b019a4155 Merge branches 'master' and 'devel' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig
2010-08-10 23:17:52 +01:00
Russell King 2192482ee5 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/Kconfig
2010-08-09 14:07:19 +01:00
Kukjin Kim 6901bbc802 ARM: s5pv210_defconfig: Update for removing s5pc110_defconfig
Now that S5PC110 machines and S5PV210 machines can be built into
one kernel, update mach-s5pv210/Kconfig and s5pv210_defconfig.

Tested on Aquila(S5PC110), GONI(S5PC110), SMDKC110(S5PC110)
and SMDKV210(S5PV210).

Created and tested against linux-2.6.35-rc5.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
2010-08-05 18:31:01 +09:00
Vincent Sanders 80690ccc41 Remove ARM default configurations which duplicate omap3_defconfig
These configurations are no longer useful as the systems they support
are covered by the generic omap3_defconfig

Signed-off-by:Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04 15:47:29 +03:00
Russell King 7b70c4275f Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/kernel/setup.c
	arch/arm/mm/init.c
2010-07-31 14:20:16 +01:00
Nicolas Pitre 5ccd4302a2 [ARM] Kirkwood: add missing machine targets to defconfig
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16 22:51:10 -04:00
Russell King e910b63d00 Merge branch 'l7200' into devel
Conflicts:
	arch/arm/configs/lusl7200_defconfig
2010-07-16 11:08:33 +01:00
Russell King c9c6fe5033 ARM: Remove support for LinkUp Systems L7200 SDP.
This hasn't been actively maintained for a long time, only receiving
the occasional build update when things break.  I doubt anyone has
one of these on their desks anymore.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-24 15:41:31 +01:00
Uwe Kleine-König 07a8c03f3e ARM: reduce defconfigs
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 07:12:18 +02:00
Ben Dooks 2992bc0668 ARM: s3c2410_defconfig: Add new machines
Add the SMDK2416, and the GTA02 to the list of machines
that are included in the s3c2410_defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:33:05 +09:00
Ben Dooks 856066c307 ARM: s3c6400_defconfig: Add framebuffer and basic LCD
Add the framebuffer driver and some basic LCD configurations
that should be suitable for the SMDK boards.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:33:04 +09:00
Ben Dooks ad2cf090e2 ARM: s3c6400_defconfig: Add RTC driver support
Now that the RTC driver supports the S3C64XX, enable
it in the build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:33:03 +09:00
Ben Dooks 8a776fb924 ARM: s3c6400_defconfig: Enable USB host side
Enable the USB Host side by adding the USB OHCI and
some basic USB driver modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:33:02 +09:00
Ben Dooks 56a5cbaf2a ARM: s3c6400_defconfig: Add SPI driver
The SPI driver was added last kernel round, so enable
the core SPI and add the 64XX and bitbang driver as
modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:33:01 +09:00
Ben Dooks e56210caeb ARM: s3c6400_defconfig: Update compiled machines
Add the machines that have been added in the last round
to the list of builds.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:33:00 +09:00
Ben Dooks f7b4dc7a14 ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34-git
Update the s5pv210_defconfig to the latest kernel version v2.6.34-git

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-26 19:04:39 +09:00
Ben Dooks fffb79f205 ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34-git
Update the s5pc110_defconfig to the latest kernel version v2.6.34-git

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-26 19:04:37 +09:00
Ben Dooks 9a4925ee15 ARM: s5pc100_defconfig: Update s5pc100_defconfig to v2.6.34-git
Update the s5pc100_defconfig to the latest kernel version v2.6.34-git

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-26 19:04:36 +09:00
Ben Dooks dfd820314b ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34-git
Update the s5p6442_defconfig to the latest kernel version v2.6.34-git

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-26 19:04:34 +09:00