- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gw2z
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some powerpc fixes for 4.8:
Misc:
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering"
* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
selftests/powerpc: Specify we expect to build with std=gnu99
powerpc/vdso: Fix build rules to rebuild vdsos correctly
powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
powerpc/32: Fix crash during static key init
powerpc: Update obsolete comment in setup_32.c about early_init()
powerpc: Print the kernel load address at the end of prom_init()
powerpc/ptrace: Fix coredump since ptrace TM changes
powerpc/32: Fix csum_partial_copy_generic()
cxl: Set psl_fir_cntl to production environment value
powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
powerpc/pci: Fix endian bug in fixed PHB numbering
powerpc/eeh: Switch to conventional PCI address output in EEH log
cxl: Fix sparse warnings
cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
cxl: Use fixed width predefined types in data structure.
powerpc/vdso: Add missing include file
powerpc: Fix unused function warning 'lmb_to_memblock'
powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
...
A couple of bug fixes have come in for v4.8 so far. Since the first few were
originally meant to go into -rc1 (but didn't get sent in time for travel
reasons), the branch is unfortunately based on top of a commit in the
middle of the merge window rather than -rc1.
Content-wise we have
- A fix for the last remaining broken build in kernelci,
getting mach-shmobile to build again with SMP disabled
- A fix for a realview regression that broke real hardware but
not the qemu model that everyone uses in practice (needed
for v4.7 as well)
- A merge conflict fix for Tegra that also broke v4.7
- Two Kconfig fixes for arm64 build regressions
- A couple of arm32 build warning fixes (all harmless)
- Fixing the RTC on Exynos7 Espresso (which apparently
never worked right)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n3Zs
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of bug fixes have come in for v4.8 so far. Since the first
few were originally meant to go into -rc1 (but didn't get sent in time
for travel reasons), the branch is unfortunately based on top of a
commit in the middle of the merge window rather than -rc1.
Content-wise we have:
- a fix for the last remaining broken build in kernelci, getting
mach-shmobile to build again with SMP disabled
- a fix for a realview regression that broke real hardware but not
the qemu model that everyone uses in practice (needed for v4.7 as
well)
- a merge conflict fix for Tegra that also broke v4.7
- two Kconfig fixes for arm64 build regressions
- a couple of arm32 build warning fixes (all harmless)
- fix the RTC on Exynos7 Espresso (which apparently never worked
right)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
arm64: Kconfig: select ALPINE_MSI only if PCI is selected
ARM: dts: realview: Fix PBX-A9 cache description
ARM: tegra: fix erroneous address in dts
ARM: dts: add syscon compatible string for AP syscon
ARM: dts: add syscon compatible string for CP syscon
ARM: oxnas: select reset controller framework
ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
ARM: don't include removed directories
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
ARM: shmobile: don't call platform_can_secondary_boot on UP
MAINTAINER: alpine: add a mailing list
ARM: do away with final ARCH_REQUIRE_GPIOLIB
arm64: dts: Fix RTC by providing rtc_src clock
- Misc fixes and cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXq0ruAAoJECgfDbjSjVRp5P8H/2OlDJdSS1l+TwOXbY95ntQ1
vxUX4vGCX5IujC+Rbt7sQV2prE3b6IktFNagpbRoWn21JkpoDMvPtYJrn5BhLtoh
fvDkZE6Wo3QztFSjaUBZWEABBt03KPX0yrAIZplu8ne/Z8KAT3zK57BPnKfmxwv+
dpxt+1wlnqAvYsoUUQZBFT4Gmk2oDiTofiIbQq7W9W/fooznLtLB+ArYtdfNJizC
JnI/vJuWceEXfjT26HexCRhA2OZskrA4ZadDhOjAqkTPN5DHfweLDuHh7IsVfDd1
wXqjc4ks3cYG0CloJ2qY2K7RpDOFIxIizixeDIuAbn9aX4sPOYYfqRm+4iRwmqQ=
=9aUO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Misc fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: deprecate old transport
virtio/s390: keep early_put_chars
virtio_blk: Fix a slient kernel panic
virtio-vsock: fix include guard typo
vhost/vsock: fix vhost virtio_vsock_pkt use-after-free
9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()
virtio: fix error handling for debug builds
virtio: fix memory leak in virtqueue_add()
This is the pxa changes for v4.8 cycle.
This is a tiny fix couple to enable changes in includes in
gpio API without breaking pxa boards.
* tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux:
ARM: pxa: add module.h for corgi symbol_get/symbol_put usage
ARM: pxa: add module.h for spitz symbol_get/symbol_put usage
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/slub.c: run free_partial() outside of the kmem_cache_node->list_lock
rmap: fix compound check logic in page_remove_file_rmap
mm, rmap: fix false positive VM_BUG() in page_add_file_rmap()
mm/page_alloc.c: recalculate some of node threshold when on/offline memory
mm/page_alloc.c: fix wrong initialization when sysctl_min_unmapped_ratio changes
thp: move shmem_huge_enabled() outside of SYSFS ifdef
revert "ARM: keystone: dts: add psci command definition"
rapidio: dereferencing an error pointer
Revert commit 51d5d12b8f ("ARM: keystone: dts: add psci command
definition"), which was inadvertently added twice.
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even when PCI is disabled, ARCH_HISI selects HISILICON_IRQ_MBIGEN
triggerring the following config warning:
warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which
has unmet direct dependencies (PCI && PCI_MSI)
This patch makes selection of HISILICON_IRQ_MBIGEN conditional on PCI.
Cc: Ma Jun <majun258@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Even when PCI is disabled, ARCH_ALPINE selects ALPINE_MSI triggerring
the following config warning:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct
dependencies (PCI)
This patch makes selection of ALPINE_MSI conditional on PCI.
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clearly QEMU is very permissive in how its PL310 model may be set up,
but the real hardware turns out to be far more particular about things
actually being correct. Fix up the DT description so that the real
thing actually boots:
- The arm,data-latency and arm,tag-latency properties need 3 cells to
be valid, otherwise we end up retaining the default 8-cycle latencies
which leads pretty quickly to lockup.
- The arm,dirty-latency property is only relevant to L210/L220, so get
rid of it.
- The cache geometry override also leads to lockup and/or general
misbehaviour. Irritatingly, the manual doesn't state the actual PL310
configuration, but based on the boardfile code and poking registers
from the Boot Monitor, it would seem to be 8 sets of 16KB ways.
With that, we can successfully boot to enjoy the fun of mismatched FPUs...
Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Cc: stable@vger.kernel.org # v4.7
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This syscon needs to be looked up by clocks, flash protection
and other consumers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This syscon needs to be looked up by flash protection, CLCD
display output settings and other consumers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For unknown reasons, we have to enable three symbols for a platform
to use a reset controller driver, otherwise we get a Kconfig
warning:
warning: (MACH_OX810SE) selects RESET_OXNAS which has unmet direct dependencies (RESET_CONTROLLER)
This selects the other two symbols for oxnas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
The machine specific header files are exported for traditional
platforms, but not for the ones that use ARCH_MULTIPLATFORM, as
they could conflict with one another.
In case of ARM_SINGLE_ARMV7M, we end up also exporting them,
but that appears to be a mistake, and we should treat it the
same way as ARCH_MULTIPLATFORM here.
'make W=1' warns about this because it passes -Wmissing-includes
to gcc and the directories are not actually present.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Three platforms used to have header files in include/mach that
are now all gone, but the removed directories are still being
included, which leads to -Wmissing-include-dirs warnings.
This removes the extra -I flags.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.
Cc: stable@vger.kernel.org
Reported-by: Chiachih Wu <wuchiachih@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dave Weinstein <olorin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A single fix for a boot crash since a commit in the merge window. Metag
was unusual in calling show_mem() early, before setup_per_cpu_pageset(),
which is no longer safe. It doesn't add much value to the log, so the
fix just drops the call.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=k+4S
-----END PGP SIGNATURE-----
Merge tag 'metag-for-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag architecture fix from James Hogan:
"A single fix for a boot crash since a commit in the merge window.
Metag was unusual in calling show_mem() early, before setup_per_cpu_pageset(),
which is no longer safe. It doesn't add much value to the log, so the
fix just drops the call"
* tag 'metag-for-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag: Drop show_mem() from mem_init()
When using if_changed, we need to add FORCE as a dependency (see
Documentation/kbuild/makefiles.txt) otherwise we don't get command line
change checking amongst other things. This has resulted in vdsos not
being rebuilt when switching between big and little endian.
The vdso64/32ld commands have to be changed around to avoid pulling
FORCE into the linker command line (code copied from x86).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we introduced the little endian support, we added the endian flags
to CC directly using override. I don't know the history of why we did
that, I suspect no one does.
Although this mostly works, it has one bug, which is that CROSS32CC
doesn't get -mbig-endian. That means when the compiler is little endian
by default and the user is building big endian, vdso32 is incorrectly
compiled as little endian and the kernel fails to build.
Instead we can add the endian flags to cflags-y/aflags-y, and then
append those to KBUILD_CFLAGS/KBUILD_AFLAGS.
This has the advantage of being 1) less ugly, 2) the documented way of
adding flags in the arch Makefile and 3) it fixes building vdso32 with a
LE toolchain.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We cannot do those initializations from apply_feature_fixups() as
this function runs in a very restricted environment on 32-bit where
the kernel isn't running at its linked address and the PTRRELOC()
macro must be used for any global accesss.
Instead, split them into a separtate steup_feature_keys() function
which is called in a more suitable spot on ppc32.
Fixes: 309b315b6e ("powerpc: Call jump_label_init() in apply_feature_fixups()")
Reported-and-tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We don't identify the machine type anymore...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes it easier to debug crashes that happen very early before
the kernel takes over Open Firmware by allowing us to relate the OF
reported crashing addresses to offsets within the kernel.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 8d460f6156 ("powerpc/process: Add the function
flush_tmregs_to_thread") added flush_tmregs_to_thread() and included
the assumption that it would only be called for a task which is not
current.
Although this is correct for ptrace, when generating a core dump, some
of the routines which call flush_tmregs_to_thread() are called. This
leads to a WARNing such as:
Not expecting ptrace on self: TM regs may be incorrect
------------[ cut here ]------------
WARNING: CPU: 123 PID: 7727 at arch/powerpc/kernel/process.c:1088 flush_tmregs_to_thread+0x78/0x80
CPU: 123 PID: 7727 Comm: libvirtd Not tainted 4.8.0-rc1-gcc6x-g61e8a0d #1
task: c000000fe631b600 task.stack: c000000fe63b0000
NIP: c00000000001a1a8 LR: c00000000001a1a4 CTR: c000000000717780
REGS: c000000fe63b3420 TRAP: 0700 Not tainted (4.8.0-rc1-gcc6x-g61e8a0d)
MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28004222 XER: 20000000
...
NIP [c00000000001a1a8] flush_tmregs_to_thread+0x78/0x80
LR [c00000000001a1a4] flush_tmregs_to_thread+0x74/0x80
Call Trace:
flush_tmregs_to_thread+0x74/0x80 (unreliable)
vsr_get+0x64/0x1a0
elf_core_dump+0x604/0x1430
do_coredump+0x5fc/0x1200
get_signal+0x398/0x740
do_signal+0x54/0x2b0
do_notify_resume+0x98/0xb0
ret_from_except_lite+0x70/0x74
So fix flush_tmregs_to_thread() to detect the case where it is called on
current, and a transaction is active, and in that case flush the TM regs
to the thread_struct.
This patch also moves flush_tmregs_to_thread() into ptrace.c as it is
only called from that file.
Fixes: 8d460f6156 ("powerpc/process: Add the function flush_tmregs_to_thread")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 7aef413656 ("powerpc32: rewrite csum_partial_copy_generic()
based on copy_tofrom_user()") introduced a bug when destination
address is odd and initial csum is not null
In that (rare) case the initial csum value has to be rotated one byte
as well as the resulting value is
This patch also fixes related comments
Fixes: 7aef413656 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent commit 599d0c954f ("mm, vmscan: move LRU lists to node"),
changed memory management code so that show_mem() is no longer safe to
call prior to setup_per_cpu_pageset(), as pgdat->per_cpu_nodestats will
still be NULL. This causes an oops on metag due to the call to
show_mem() from mem_init():
node_page_state_snapshot(...) + 0x48
pgdat_reclaimable(struct pglist_data * pgdat = 0x402517a0)
show_free_areas(unsigned int filter = 0) + 0x2cc
show_mem(unsigned int filter = 0) + 0x18
mem_init()
mm_init()
start_kernel() + 0x204
This wasn't a problem before with zone_reclaimable() as zone_pcp_init()
was already setting zone->pageset to &boot_pageset, via setup_arch() and
paging_init(), which happens before mm_init():
zone_pcp_init(...)
free_area_init_core(...) + 0x138
free_area_init_node(int nid = 0, ...) + 0x1a0
free_area_init_nodes(...) + 0x440
paging_init(unsigned long mem_end = 0x4fe00000) + 0x378
setup_arch(char ** cmdline_p = 0x4024e038) + 0x2b8
start_kernel() + 0x54
No other arches appear to call show_mem() during boot, and it doesn't
really add much value to the log, so lets just drop it from mem_init().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-metag@vger.kernel.org
There only ever have been two host implementations of the old
s390-virtio (pre-ccw) transport: the experimental kuli userspace,
and qemu. As qemu switched its default to ccw with 2.4 (with most
users having used ccw well before that) and removed the old transport
entirely in 2.6, s390-virtio probably hasn't been in active use for
quite some time and is therefore likely to bitrot.
Let's start the slow march towards removing the code by deprecating
it.
Note that this also deprecates the early virtio console code, which
has been causing trouble in the guest without being wired up in any
relevant hypervisor code.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The generic allocation code may sometimes decide to assign a prefetchable
64-bit BAR to the M32 window. In fact it may also decide to allocate
a 64-bit non-prefetchable BAR to the M64 one ! So using the resource
flags as a test to decide which window was used for PE allocation is
just wrong and leads to insane PE numbers.
Instead, compare the addresses to figure it out.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rename the function as agreed by Ben & Gavin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When machine check occurs with MSR(RI=0), it means MC interrupt is
unrecoverable and kernel goes down to panic path. But the console
message still shows it as recovered. This patch fixes the MCE console
messages.
Fixes: 36df96f8ac ("powerpc/book3s: Decode and save machine check event.")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent commit 63a72284b1 ("powerpc/pci: Assign fixed PHB number
based on device-tree properties"), added code to read a 64-bit property
from the device tree, and if not found read a 32-bit property (reg).
There was a bug in the 32-bit case, on big endian machines, due to the
use of the 64-bit value to read the 32-bit property. The cast of &prop
means we end up writing to the high 32-bit of prop, leaving the low
32-bits containing whatever junk was on the stack.
If that junk value was non-zero, and < MAX_PHBS, we would end up using
it as the PHB id. This results in users seeing what appear to be random
PHB ids.
Fix it by reading into a u32 property and then assigning that to the
u64 value, letting the CPU do the correct conversions for us.
Fixes: 63a72284b1 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a very minor/trivial fix for the output of PCI address on EEH
logs. The PCI address on "OF node" field currently is using ":" as a
separator for the function, but the usual separator is ".". This patch
changes the separator to dot, so the PCI address is printed as usual.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some powerpc builds fail with the following buld error.
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
from arch/powerpc/kernel/vdso.c:28:
arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
arch/powerpc/include/asm/cputhreads.h:101:2: error:
implicit declaration of function 'cpu_has_feature'
Fixes: b92a226e52 ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warning:
arch/powerpc/platforms/pseries/hotplug-memory.c:323:29: error: 'lmb_to_memblock' defined but not used [-Werror=unused-function]
static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb)
^~~~~~~~~~~~~~~
The only consumer of this function is 'dlpar_remove_lmb', which is
enabled with CONFIG_MEMORY_HOTREMOVE, so move it into the same
ifdef block.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The current implementation of MCE early handling modifies CR0/1 registers
without saving its old values. Fix this by moving early check for
powersaving mode to machine_check_handle_early().
The power architecture 2.06 or later allows the possibility of getting
machine check while in nap/sleep/winkle. The last bit of HSPRG0 is set
to 1, if thread is woken up from winkle. Hence, clear the last bit of
HSPRG0 (r13) before MCE handler starts using it as paca pointer.
Also, the current code always puts the thread into nap state irrespective
of whatever idle state it woke up from. Fix that by looking at
paca->thread_idle_state and put the thread back into same state where it
came from.
Fixes: 1c51089f77 ("powerpc/book3s: Return from interrupt if coming from evil context.")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h so that MCE handler changes
in subsequent patch can use it.
No functionality change.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function pnv_restore_hyp_resource() loads the TOC into r2 from
the invalid PACA pointer before fixing r13 value. This do not affect
POWER ISA 3.0 but it does have an impact on POWER ISA 2.07 or less
leading CPU to get stuck forever.
login: [ 471.830433] Processor 120 is stuck.
This can be easily reproducible using following steps:
- Turn off SMT
$ ppc64_cpu --smt=off
- offline/online any online cpu (Thread 0 of any core which is online)
$ echo 0 > /sys/devices/system/cpu/cpu<num>/online
$ echo 1 > /sys/devices/system/cpu/cpu<num>/online
For POWER ISA 2.07 or less, the last bit of HSPRG0 is set indicating
that thread is waking up from winkle. Hence, the last bit of HSPRG0(r13)
needs to be clear before accessing it as PACA to avoid loading invalid
values from invalid PACA pointer.
Fix this by loading TOC after r13 register is corrected.
Fixes: bcef83a00d ("powerpc/powernv: Add platform support for stop instruction")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit fd141d1a99 ("powerpc/powernv/pci: Rework accessing the TCE
invalidate register") broke TCE invalidation on IODA2/PHB3 for real
mode.
This makes invalidate work again.
Fixes: fd141d1a99 ("powerpc/powernv/pci: Rework accessing the TCE invalidate register")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We should return -ENOMEM if alloc_spu_gang() fails.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This sets the type of the interrupt appropriately. We set it as follow:
- If not mapped from the device-tree, we use edge. This is the case
of the virtual interrupts and PCI MSIs for example.
- If mapped from the device-tree and #interrupt-cells is 2 (PAPR
compliant), we use the second cell to set the appropriate type
- If mapped from the device-tree and #interrupt-cells is 1 (current
OPAL on P8 does that), we assume level sensitive since those are
typically going to be the PSI LSIs which are level sensitive.
Additionally, we mark the interrupts requested via the opal_interrupts
property all level. This is a bit fishy but the best we can do until we
fix OPAL to properly expose them with a complete descriptor. It is also
correct for the current HW anyway as OPAL interrupts are currently PCI
error and PSI interrupts which are level.
Finally now that edge interrupts are properly identified, we can enable
CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if
they occur while masked, which some drivers rely upon.
This fixes issues with lost interrupts on some Mellanox adapters.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch utilises the GENERIC_CPU_AUTOPROBE infrastructure
to automatically load the crc32c-vpmsum module if the CPU supports
it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When I initially added the unsafe_[get|put]_user() helpers in commit
5b24a7a2aa ("Add 'unsafe' user access functions for batched
accesses"), I made the mistake of modeling the interface on our
traditional __[get|put]_user() functions, which return zero on success,
or -EFAULT on failure.
That interface is fairly easy to use, but it's actually fairly nasty for
good code generation, since it essentially forces the caller to check
the error value for each access.
In particular, since the error handling is already internally
implemented with an exception handler, and we already use "asm goto" for
various other things, we could fairly easily make the error cases just
jump directly to an error label instead, and avoid the need for explicit
checking after each operation.
So switch the interface to pass in an error label, rather than checking
the error value in the caller. Best do it now before we start growing
more users (the signal handling code in particular would be a good place
to use the new interface).
So rather than
if (unsafe_get_user(x, ptr))
... handle error ..
the interface is now
unsafe_get_user(x, ptr, label);
where an error during the user mode fetch will now just cause a jump to
'label' in the caller.
Right now the actual _implementation_ of this all still ends up being a
"if (err) goto label", and does not take advantage of any exception
label tricks, but for "unsafe_put_user()" in particular it should be
fairly straightforward to convert to using the exception table model.
Note that "unsafe_get_user()" is much harder to convert to a clever
exception table model, because current versions of gcc do not allow the
use of "asm goto" (for the exception) with output values (for the actual
value to be fetched). But that is hopefully not a limitation in the
long term.
[ Also note that it might be a good idea to switch unsafe_get_user() to
actually _return_ the value it fetches from user space, but this
commit only changes the error handling semantics ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 817820b022 ("powerpc/iommu: Support "hybrid" iommu/direct DMA
ops for coherent_mask < dma_mask) adds a check of coherent_dma_mask for
dma allocations.
Unfortunately current PASemi code does not set this value for the DMA
engine, which ends up with the default value of 0xffffffff, the result
is on a PASemi system with >2Gb ram and iommu enabled the the onboard
ethernet stops working due to an inability to allocate memory. Add an
initialisation to pci_dma_dev_setup_pasemi().
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* x86 nested virt tweak and OOPS fix
* Simplify pvclock code (vdso bits acked by Andy Lutomirski).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXpKOnAAoJEL/70l94x66D5z4H/R2660Vy3brQrI8lGxCtkXJt
AVe8PwI8nDfYJ/UkMZ2KcHPSvy+sHW2ydaZXYNqXHVBeTaUxiPW9rTgK61ebypGL
1tPOgJ3kGZF6XEdAz6gS8LniNFc+D3W6Y6sRylkEsqPj39/hxe7QMoOMSCQ9imbW
WMIx7/81i1EMw6oi+9FVtq+yHCpvyfFnD8t1TDsYWOReVn1J15SxbEs4Ih+hBMLz
HZ5DEjp9cAmzeR7GLje5eH1t6TEEoNb1MNgFWuscoAsDf8D9DKqRB9s0hC+TLFYn
oZbGSqjQwu3/VMblgedinH6X9MTm8V0zW29ToGnDcoO00AUmdlNmXSaZUhvT/Rs=
=H5cD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
- ARM bugfix and MSI injection support
- x86 nested virt tweak and OOPS fix
- Simplify pvclock code (vdso bits acked by Andy Lutomirski).
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
nvmx: mark ept single context invalidation as supported
nvmx: remove comment about missing nested vpid support
KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
KVM: documentation: fix KVM_CAP_X2APIC_API information
x86: vdso: use __pvclock_read_cycles
pvclock: introduce seqcount-like API
arm64: KVM: Set cpsr before spsr on fault injection
KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
KVM: arm/arm64: Enable MSI routing
KVM: arm/arm64: Enable irqchip routing
KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
KVM: irqchip: Convey devid to kvm_set_msi
KVM: Add devid in kvm_kernel_irq_routing_entry
KVM: api: Pass the devid in the msi routing entry
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.8. Also includes is a
minor SSB cleanup as SSB code traditionally is merged through the MIPS
tree:
ATH25:
- MIPS: Add default configuration for ath25
Boot:
- For zboot, copy appended dtb to the end of the kernel
- store the appended dtb address in a variable
BPF:
- Fix off by one error in offset allocation
Cobalt code:
- Fix typos
Core code:
- debugfs_create_file returns NULL on error, so don't use IS_ERR for
testing for errors.
- Fix double locking issue in RM7000 S-cache code. This would only
affect RM7000 ARC systems on reboot.
- Fix page table corruption on THP permission changes.
- Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
David says, there are no compatibility issues raised by this fix.
- Move some signal code around.
- Rewrite r4k count/compare clockevent device registration such that
min_delta_ticks/max_delta_ticks files are guaranteed to be
initialized.
- Only register r4k count/compare as clockevent device if we can
assume the clock to be constant.
- Fix MSA asm warnings in control reg accessors
- uasm and tlbex fixes and tweaking.
- Print segment physical address when EU=1.
- Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
- CP: Allow booting by VP other than VP 0
- Cache handling fixes and optimizations for r4k class caches
- Add hotplug support for R6 processors
- Cleanup hotplug bits in kconfig
- traps: return correct si code for accessing nonmapped addresses
- Remove cpu_has_safe_index_cacheops
Lantiq:
- Register IRQ handler for virtual IRQ number
- Fix EIU interrupt loading code
- Use the real EXIN count
- Fix build error.
Loongson 3:
- Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
Octeon:
- Delete built-in DTB pruning code for D-Link DSR-1000N.
- Clean up GPIO definitions in dlink_dsr-1000n.dts.
- Add more LEDs to the DSR-100n DTS
- Fix off by one in octeon_irq_gpio_map()
- Typo fixes
- Enable SATA by default in cavium_octeon_defconfig
- Support readq/writeq()
- Remove forced mappings of USB interrupts.
- Ensure DMA descriptors are always in the low 4GB
- Improve USB reset code for OCTEON II.
Pistachio:
- Add maintainers entry for pistachio SoC Support
- Remove plat_setup_iocoherency
Ralink:
- Fix pwm UART in spis group pinmux.
SSB:
- Change bare unsigned to unsigned int to suit coding style
Tools:
- Fix reloc tool compiler warnings.
Other:
- Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
MIPS: mm: Fix definition of R6 cache instruction
MIPS: tools: Fix relocs tool compiler warnings
MIPS: Cobalt: Fix typo
MIPS: Octeon: Fix typo
MIPS: Lantiq: Fix build failure
MIPS: Use CPHYSADDR to implement mips32 __pa
MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
MIPS: store the appended dtb address in a variable
MIPS: ZBOOT: copy appended dtb to the end of the kernel
MIPS: ralink: fix spis group pinmux
MIPS: Factor o32 specific code into signal_o32.c
MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
MIPS: Use per-mm page to execute branch delay slot instructions
MIPS: Modify error handling
MIPS: c-r4k: Use SMP calls for CM indexed cache ops
MIPS: c-r4k: Avoid small flush_icache_range SMP calls
MIPS: c-r4k: Local flush_icache_range cache op override
MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
...
Pull x86 fixes from Ingo Molnar:
"Two fixes and a cleanup-fix, to the syscall entry code and to ptrace"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace
x86/ptrace: Stop setting TS_COMPAT in ptrace code
x86/vdso: Error out if the vDSO isn't a valid DSO
support for the J-Core J2 processor, an open source synthesizable
reimplementation of the SH-2 ISA, resolve a longstanding sigcontext
ABI mismatch issue, and fix various bugs including nommu-specific
issues and minor regressions introduced in 4.6.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJXpQweAAoJELcQ+SIFb8Ha2vgH/Rm3YTHEgGeQhRvBle8DTPNv
l9xBCQ6UMVb9T8C5nyP0jdioAVDQr7gh7sv2c7inIjN8hQh16DXFtNV8X6G3b0jv
OC0+rBmcYjpO7gGC/L2sRE8ghuNpoIBJFojZy6bwOIvpF6EDMAZ9bAU/VFbY28so
nCUdEo0gAmrdqGyHRfEJke7D7AKPvpAnN/cmRcvNQPhkkzKjRSNg5rHLthmvAKyp
1ChASb3YYPTgOY09izD8JUp4rk7v7q2smpgfeZfGQhIN/w6QKpv5OIqe+vrm1iKU
B6q5gBHS7Y2VYilp1zKQedLM9ZthH6rnpkB25RzyH655uTwf//6ihyP3kEwlPkc=
=wwNa
-----END PGP SIGNATURE-----
Merge tag 'sh-for-4.8' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"These changes improve device tree support (including builtin DTB), add
support for the J-Core J2 processor, an open source synthesizable
reimplementation of the SH-2 ISA, resolve a longstanding sigcontext
ABI mismatch issue, and fix various bugs including nommu-specific
issues and minor regressions introduced in 4.6.
The J-Core arch support is included here but to be usable it needs
drivers that are waiting on approval/inclusion from their subsystem
maintainers"
* tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits)
sh: add device tree source for J2 FPGA on Mimas v2 board
sh: add defconfig for J-Core J2
sh: use common clock framework with device tree boards
sh: system call wire up
sh: Delete unnecessary checks before the function call "mempool_destroy"
sh: do not perform IPI-based cache flush except on boards that need it
sh: add SMP support for J2
sh: SMP support for SH2 entry.S
sh: add working futex atomic ops on userspace addresses for smp
sh: add J2 atomics using the cas.l instruction
sh: add AT_HWCAP flag for J-Core cas.l instruction
sh: add support for J-Core J2 processor
sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE
sh: allow clocksource drivers to register sched_clock backends
sh: make heartbeat driver explicitly non-modular
sh: make board-secureedge5410 explicitly non-modular
sh: make mm/asids-debugfs explicitly non-modular
sh: make time.c explicitly non-modular
sh: fix futex/robust_list on nommu models
sh: disable aliased page logic on NOMMU models
...
- Fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
- Avoid accessing unmapped FDT fields when checking validity
- Correctly account for vDSO AUX entry in ARCH_DLINFO
- Fix kallsyms with absolute expressions in linker script
- Kill unnecessary symbol-based relocs in vmlinux
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJXpFZ5AAoJELescNyEwWM0PI4IALsTuHRzClOSMDLiqMUj8t+5
WNAcqybxAjCOVxAHckhweju++TeJBxcRH1nvBoNwiHIdHTv4fq1TZ3PeEq9kWMg5
JbKjYjvd9dW8k6LXMya8iXCYtG3kzbNejkNpOTVebC86yvas1IiEjNb/ztPdhJeM
HBSOkhfk8RcskfNxhuscZzGXbbdH9/R+XSTNRHN/RwCZH8PlInmduD9BbMvDhZyP
NLFonD2IgQ4as1kYG/HdIcw0BamHiURjd043+gyoqMvm7JjPksRzlQnr91SMkX17
LykXjHYPi2Me3aTrZ1NtkUNd5FHLHZ6/b9Wg6nA19d5KWkd3ER9uSJqGxkkbnt0=
=dtGK
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
- avoid accessing unmapped FDT fields when checking validity
- correctly account for vDSO AUX entry in ARCH_DLINFO
- fix kallsyms with absolute expressions in linker script
- kill unnecessary symbol-based relocs in vmlinux
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix copy-on-write referencing in HugeTLB
arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
- Prevent the low-level assembly hibernate code on x86-64 from
referring to __PAGE_OFFSET directly as a symbol which doesn't work
when the kernel identity mapping base is randomized, in which case
__PAGE_OFFSET is a variable (Rafael Wysocki).
- Avoid selecting CPU_FREQ_STAT by default as the statistics are not
required for proper cpufreq operation (Borislav Petkov).
- Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of
processors where out-of-band (OBB) control of P-states is possible
and if that is in use, intel_pstate should not attempt to manage
P-states (Srinivas Pandruvada).
- Drop some unnecessary checks from the wakeup IRQ handling code in
the PM core (Markus Elfring).
- Reduce the number operating performance point (OPP) lookups in
one of the OPP framework's helper functions (Jisheng Zhang).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=WvPB
-----END PGP SIGNATURE-----
Merge tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"A few more fixes and cleanups in the x86-64 low-level hibernation
code, PM core, cpufreq (Kconfig and intel_pstate), and the operating
points framework.
Specifics:
- Prevent the low-level assembly hibernate code on x86-64 from
referring to __PAGE_OFFSET directly as a symbol which doesn't work
when the kernel identity mapping base is randomized, in which case
__PAGE_OFFSET is a variable (Rafael Wysocki).
- Avoid selecting CPU_FREQ_STAT by default as the statistics are not
required for proper cpufreq operation (Borislav Petkov).
- Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of
processors where out-of-band (OBB) control of P-states is possible
and if that is in use, intel_pstate should not attempt to manage
P-states (Srinivas Pandruvada).
- Drop some unnecessary checks from the wakeup IRQ handling code in
the PM core (Markus Elfring).
- Reduce the number operating performance point (OPP) lookups in one
of the OPP framework's helper functions (Jisheng Zhang)"
* tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/power/64: Do not refer to __PAGE_OFFSET from assembly code
cpufreq: Do not default-yes CPU_FREQ_STAT
cpufreq: intel_pstate: Add more out-of-band IDs
PM / OPP: optimize dev_pm_opp_set_rate() performance a bit
PM-wakeup: Delete unnecessary checks before three function calls