Commit Graph

1056 Commits

Author SHA1 Message Date
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds b24ca57e76 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6: (68 commits)
  power_supply: Mark da9052 driver as broken
  power_supply: Drop usage of nowarn variant of sysfs_create_link()
  s3c_adc_battery: Average over more than one adc sample
  power_supply: Add DA9052 battery driver
  isp1704_charger: Fix missing check
  jz4740-battery: Fix signedness bug
  power_supply: Assume mains power by default
  sbs-battery: Fix devicetree match table
  ARM: rx51: Add bq27200 i2c board info
  sbs-battery: Change power supply name
  devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings
  devicetree-bindings: Add vendor entry for Smart Battery Systems
  sbs-battery: Rename internals to new name
  bq20z75: Rename to sbs-battery
  wm97xx_battery: Use DEFINE_MUTEX() for work_lock
  max8997_charger: Remove duplicate module.h
  lp8727_charger: Some minor fixes for the header
  lp8727_charger: Add header file
  power_supply: Convert drivers/power/* to use module_platform_driver()
  power_supply: Add "unknown" in power supply type
  ...
2012-01-11 18:53:05 -08:00
Linus Torvalds f62f61917d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  hid-input/battery: add FEATURE quirk
  hid-input/battery: remove battery_val
  hid-input/battery: power-supply type really *is* a battery
  hid-input/battery: make the battery setup common for INPUTs and FEATUREs
  hid-input/battery: deal with both FEATURE and INPUT report batteries
  hid-input/battery: add quirks for battery
  hid-input/battery: remove apparently redundant kmalloc
  hid-input: add support for HID devices reporting Battery Strength
  HID: hid-multitouch: add support 9 new Xiroku devices
  HID: multitouch: add support for 3M 32"
  HID: multitouch: add support of Atmel multitouch panels
  HID: usbhid: defer LED setting to a workqueue
  HID: usbhid: hid-core: submit queued urbs before suspend
  HID: usbhid: remove LED_ON
  HID: emsff: use symbolic name instead of hardcoded PID constant
  HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II
  HID: Kconfig: fix syntax
  HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY
  HID: multitouch: support PixArt optical touch screen
  HID: make parser more verbose about parsing errors by default
  ...

Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in
staging, moved in this branch) and similarly for the rules for same file
in drivers/staging/hv/{Kconfig,Makefile}.
2012-01-10 10:48:28 -08:00
Jiri Kosina 420174afdc Merge branch 'hid-battery' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into for-linus 2012-01-09 11:24:59 +01:00
Linus Torvalds 98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Jeremy Fitzhardinge 652aa6a9ac hid-input/battery: add FEATURE quirk
Apple keyboards require a FEATURE report to query the battery state,
even though they list as an input.  Without this, it returns an error.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:31:25 +11:00
Jeremy Fitzhardinge ce63920b39 hid-input/battery: remove battery_val
hidinput_get_battery_property() now directly polls the device for the
current battery strength, so there's no need for battery_val, or the
code to set it on the input event path.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:31:18 +11:00
Jeremy Fitzhardinge b3ca3839f3 hid-input/battery: power-supply type really *is* a battery
It just isn't a battery which is powering the computer.  upower needs
a more nuanced understanding of this.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:30:39 +11:00
Jeremy Fitzhardinge 2f2e3f6d7a hid-input/battery: make the battery setup common for INPUTs and FEATUREs
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:30:38 +11:00
Jeremy Fitzhardinge fb8ac91b4d hid-input/battery: deal with both FEATURE and INPUT report batteries
Some devices seem to report batteries as FEATUREs, others as INPUTs.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:30:37 +11:00
Jeremy Fitzhardinge bbc21cfd55 hid-input/battery: add quirks for battery
Some devices always report percentage, despite having 0/255 as their
min/max, so add a quirk for them.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:30:37 +11:00
Jeremy Fitzhardinge ef5251993c hid-input/battery: remove apparently redundant kmalloc
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08 18:30:36 +11:00
Daniel Nicoletti c5a92aa3eb hid-input: add support for HID devices reporting Battery Strength
I've sent an email earlier asking for help with a GetFeature code, and now I
have a second patch on top of Jeremy's to provide the battery functionality
for devices that support reporting it.

If I understood correctly when talking to Jeremy he said his device
never actually reported the status as an input event (sorry if I didn't
understand it correctly), and after reading HID specs I believe it's
really because it was meant to be probed, I have an Apple Keyboard and
Magic Trackpad both bluetooth batteries operated, so using PacketLogger
I saw that Mac OSX always ask the battery status using the so called
GetFeature.

What my patch does is basically:
- store the report id that matches the battery_strength
- setup the battery if 0x6.0x20 is found, even if that is reported as a feature
  (as it was meant to be but only the MagicTrackpad does)
- when upower or someone access /sys/class/power_supply/hid-*/capacity it
  will probe the device and return it's status.

It works great for both devices, but I have two concerns:
- the report_features function has a duplicated code
- it would be nice if it was possible for specific drivers to provide their own
  probe as there might be some strange devices... (but maybe it's
already possible)

I've talked to the upower dev and he fixed it to be able to show the
right percentage.

Here how the uevent file (in /sys/class/power_supply/hid-*/) looks like:
POWER_SUPPLY_NAME=hid-00:22:41:D9:18:E7-battery
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_CAPACITY=66
POWER_SUPPLY_MODEL_NAME=MacAdmin’s keyboard
POWER_SUPPLY_STATUS=Discharging

POWER_SUPPLY_NAME=hid-70:CD:60:F5:FF:3F-battery
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_CAPACITY=62
POWER_SUPPLY_MODEL_NAME=nexx’s Trackpad
POWER_SUPPLY_STATUS=Discharging

Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
2012-01-08 18:30:34 +11:00
Greg Kroah-Hartman ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Jiri Kosina e027372856 Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', 'upstream-fixes', 'wacom' and 'wiimote' into for-linus 2012-01-05 15:51:02 +01:00
Masatoshi Hoshikawa 11576c6114 HID: hid-multitouch: add support 9 new Xiroku devices
This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.).

Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-05 15:49:21 +01:00
Al Viro 2c9ede55ec switch device_get_devnode() and ->devnode() to umode_t *
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
Al Viro d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Benjamin Tissoires c4fad877cd HID: multitouch: add support for 3M 32"
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 11:10:56 +01:00
Benjamin Tissoires b105712469 HID: multitouch: add support of Atmel multitouch panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 11:10:36 +01:00
Daniel Kurtz 4371ea8202 HID: usbhid: defer LED setting to a workqueue
Defer LED setting action to a workqueue.
This is more likely to send all LED change events in a single URB.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 11:18:35 +01:00
Daniel Kurtz f0befcd64b HID: usbhid: hid-core: submit queued urbs before suspend
If any userspace program has opened a keyboard device, the input core
de-activates the keyboard's LEDs upon suspend().  It does this by sending
individual EV_LED[LED_X]=0 events to the underlying device driver by
directly calling the driver's registered event() handler.

The usb-hid driver event() handler processes each request by immediately
attempting to submit a CTRL URB to turn off the LED.  USB URB submission
is asynchronous.  First the URB is added to the head of the ctrl queue.
Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately
(and CTRL_RUNNING is set).  If the CTRL_RUNNING flag was already true,
then the newly queued URB is submitted in the ctrl completion handler when
all previously submitted URBs have completed.  When all queued URBs have
been submitted, the completion handler clears the CTRL_RUNNING flag.

In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get
queued, with only the first actually submitted.  Soon after input
suspend() handler finishes, the usb-hid suspend() handler gets called.
Since this is NOT a PM_EVENT_AUTO suspend, the handler sets
REPORTED_IDLE, then waits for io to complete.

Unfortunately, this usually happens while the first LED request is
actually still being processed.  Thus when the completion handler tries
to submit the second LED request it fails, since REPORTED_IDLE is
already set!  This REPORTED_IDLE check failure causes the completion
handler to complete, however without clearing the CTRL_RUNNING flag.
This, in turn, means that the suspend() handler's wait_io() condition
is never satisfied, and instead it times out after 10 seconds, aborting
the original system suspend.

This patch changes the behavior to the following:
  (1) allow completion handler to finish submitting all queued URBs, even if
      REPORTED_IDLE is set.  This guarantees that all URBs queued before the
      hid-core suspend() call will be submitted before the system is
      suspended.
  (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but
      don't submit, new URB submission requests.  These queued requests get
      submitted when resume() flushes the URB queue. This is similar to the
      existing behavior, however, any requests that arrive while the queue is
      not yet empty will still get submitted before suspend.
  (3) set the RUNNING flag when flushing the URB queue in resume().
      This keeps URBs that were queued in (2) from colliding with any new
      URBs that are being submitted during the resume process.  The new URB
      submission requests upon resume get properly queued behind the ones
      being flushed instead of the current situation where they collide,
      causing memory corruption and oopses.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 11:18:35 +01:00
Daniel Kurtz ede6a8b239 HID: usbhid: remove LED_ON
LED_ON was defined in the original version of the hid-core autosuspend patch.
However, during review, the setting and clearing of it was redone
using ledcount.  The test was left in accidentally.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 11:18:35 +01:00
Jiri Kosina 05ee283879 HID: emsff: use symbolic name instead of hardcoded PID constant
Use macro instead of 0x118 PID in device table.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 00:29:19 +01:00
Ignaz Forster cd07655e73 HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II
Add quirk for the Trio Linker Plus II - the adapter supports several
controllers simultaneously, generating a new HID entry for each connected
device.

Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 00:25:33 +01:00
Jiri Kosina d66c266ad4 HID: Kconfig: fix syntax
Replace mistakenly used '==' by '='.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-19 09:16:29 +01:00
Jiri Kosina 7e69ba7cae HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY
ppc6xx_defconfig reveals this:

drivers/built-in.o: In function `hidinput_cleanup_battery': drivers/hid/hid-input.c:351: undefined reference to`power_supply_unregister'
drivers/built-in.o: In function `hidinput_setup_battery': drivers/hid/hid-input.c:338: undefined reference to `power_supply_register'
make[1]: *** [.tmp_vmlinux1] Error 1

The defconfig in question doens't mention either option and kbuild is
genertaing

	CONFIG_HID_BATTERY_STRENGTH=y
	CONFIG_POWER_SUPPLY=m

which is wrong. Put a proper dependency in place.

Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-16 23:35:55 +01:00
Aaron Tian b7ea95ff9b HID: multitouch: support PixArt optical touch screen
This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]

Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15 11:13:41 +01:00
Jiri Kosina 8c3d52fc39 HID: make parser more verbose about parsing errors by default
Most of the parsing errors (typically resulting in device not being claimed
by HID subsystem at all) are reported only in debugging mode, which makes
root-causing problems with buggy devices unnecessarily more difficult.

Convert reporting of important HID report descriptor parsing errors to
be reported through hid_err() / hid_warn() instead of dbg_hid().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15 11:00:38 +01:00
David Herrmann ef6f41157f HID: wiimote: Select INPUT_FF_MEMLESS
We depend on memless force-feedback support, therefore correctly select the
related config options.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-12 00:27:21 +01:00
Jeremy Fitzhardinge 35b4c01e29 power_supply: add "powers" links to self-powered HID devices
Make the relationship between the Wiimote and Wacom self-powered HID
devices and their power supply explicit by adding a "powers" link.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jiri Kosina <jkosina@suse.cz>
2011-12-09 09:54:17 -08:00
Jeremy Fitzhardinge 73db88137b power_supply: add scope properties to some self-powered HID devices
The Wacom and Wiimote HID drivers register power supplies for themselves
to indicate their battery levels.  Make those power supplies device scope.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jiri Kosina <jkosina@suse.cz>
2011-12-09 09:53:42 -08:00
Stefan Achatz d41c2a7011 HID: roccat: Add support for Isku keyboard
This patch adds support for Roccat Isku keyboard.
Userland tools can be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-06 10:21:10 +01:00
Linus Torvalds 7ed89aed2b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Correct General touch PID
2011-12-02 08:25:46 -08:00
K. Y. Srinivasan 74c4fb0580 HID: hv_mouse: Properly add the hid device
We need to properly add the hid device to correctly initialize the sysfs state.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Fuzhou Chen <fuzhouch@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-01 20:53:57 +01:00
Benjamin Tissoires 545803651d HID: hid-multitouch: add support for new Hanvon panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30 15:38:23 +01:00
Benjamin Tissoires 5e7ea11f60 HID: multitouch: merge quanta driver into hid-multitouch
This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30 15:32:18 +01:00
Jeremy Fitzhardinge 6720079578 HID: hid-input: fix compile for !HID_BATTERY_STRENGTH
As reported by Stephen Rothwell:
drivers/hid/hid-input.c: In function 'hidinput_hid_event':
drivers/hid/hid-input.c:865:6: error: 'struct hid_device' has no member
named 'battery_val'
drivers/hid/hid-input.c:866:3: error: 'struct hid_device' has no member
named 'battery_min'
drivers/hid/hid-input.c:866:3: error: 'struct hid_device' has no member
named 'battery_max'

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30 14:42:08 +01:00
Jeremy Fitzhardinge 4f5ca836be HID: hid-input: add support for HID devices reporting Battery Strength
Some HID devices, such as my Bluetooth mouse, report their battery
strength as an event.  Rather than passing it through as a strange
absolute input event, this patch registers it with the power_supply
subsystem as a battery, so that the device's Battery Strength can be
reported to usermode.

The battery appears in sysfs names
/sys/class/power_supply/hid-<UNIQ>-battery, and it is a child of the
battery-containing device, so it should be clear what it's the battery of.

Unfortunately on my current Fedora 16 system, while the battery does
appear in the UI, it is listed as a Laptop Battery with 0% charge (since
it ignores the "capacity" property of the battery and instead computes
it from the "energy*" fields, which we can't supply given the limited
information contained within the HID Report).

Still, this patch is the first step.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-28 11:10:22 +01:00
Benjamin Tissoires b1807719f6 HID: Correct General touch PID
Genera Touch told us that 0001 is their single point device
and 0003 is the multitouch one. Apparently, we made the tests
someone having a prototype, and not the final product.
They said it should be safe to do the switch.

This partially reverts 5572da0 ("HID: hid-mulitouch: add support
for the 'Sensing Win7-TwoFinger'").

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:53:53 +01:00
Benjamin Tissoires 1b723e8dc8 HID: multitouch: correct eGalax a001 protocol
This device use another protocol while sending the events.
It's the same as the one described as "serial" by Microsoft.
We are keeping here the sn_move and sn_pressure parameters for
egalax devices.

CC: Cedric Sodhi <manday@gmx.net>
CC: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:39 +01:00
Benjamin Tissoires 66f06127f3 HID: multitouch: add support for the MSI Windpad 110W
Just another eGalax device.
Please note that adding this device to have_special_driver
in hid-core.c is not required anymore.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:39 +01:00
Marek Vasut bb9ff21072 HID: multitouch: Add egalax ID for Acer Iconia W500
This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel
supports up to five fingers, therefore the need for a new addition of panel
types.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:39 +01:00
Benjamin Tissoires e36f690b37 HID: multitouch: cleanup with eGalax PID definitions
This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N}
to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax
devices.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:38 +01:00
Benjamin Tissoires 26a2abe1e1 HID: multitouch: remove .maxcontacts field for eGalax
Some eGalax devices are 4 or 5 fingers touches, wereas others are 2.
This patch removes the limit in which all eGalax presents 2 touches.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:38 +01:00
Benjamin Tissoires 2261bb9ff0 HID: multitouch: cleanup eGalax quirks
The previous implementation of eGalax protocol was not satisfying as
we had to manually set x/y ranges as they were corrupted after reading
the report descriptor.
Indeed, the report descriptor provided a stylus input interface which
override the correct values.

This patch omits this input, thus leaving the correct value untouched,
and the MT_QUIRK_EGALAX_XYZ_FIXUP not required anymore.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:38 +01:00
Benjamin Tissoires eec29e3dab HID: multitouch: create sysfs attribute to control quirks from user-space
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:38 +01:00
Chris Bagwell 1fd8f04749 HID: hid-multitouch - add another eGalax id
This allows ASUS Eee Slate touchscreens to work.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 14:50:37 +01:00
Willem Penninckx a2b2c20ba2 HID: usbkbd: kill LED URB on disconnect
The LED URB was left unkilled when the USB device is disconnected.

Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 12:31:04 +01:00