Commit Graph

86 Commits

Author SHA1 Message Date
Linus Torvalds ebb3727779 Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "It might look big in volume, but when categorized, not a lot of
  drivers are touched.  The pull request contains:

   - mtip32xx fixes from Micron.

   - A slew of drbd updates, this time in a nicer series.

   - bcache, a flash/ssd caching framework from Kent.

   - Fixes for cciss"

* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
  bcache: Use bd_link_disk_holder()
  bcache: Allocator cleanup/fixes
  cciss: bug fix to prevent cciss from loading in kdump crash kernel
  cciss: add cciss_allow_hpsa module parameter
  drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
  mtip32xx: Workaround for unaligned writes
  bcache: Make sure blocksize isn't smaller than device blocksize
  bcache: Fix merge_bvec_fn usage for when it modifies the bvm
  bcache: Correctly check against BIO_MAX_PAGES
  bcache: Hack around stuff that clones up to bi_max_vecs
  bcache: Set ra_pages based on backing device's ra_pages
  bcache: Take data offset from the bdev superblock.
  mtip32xx: mtip32xx: Disable TRIM support
  mtip32xx: fix a smatch warning
  bcache: Disable broken btree fuzz tester
  bcache: Fix a format string overflow
  bcache: Fix a minor memory leak on device teardown
  bcache: Documentation updates
  bcache: Use WARN_ONCE() instead of __WARN()
  bcache: Add missing #include <linux/prefetch.h>
  ...
2013-05-08 11:51:05 -07:00
Linus Torvalds 9e8529afc4 Tracing updates for Linux 3.10
Along with the usual minor fixes and clean ups there are a few major
 changes with this pull request.
 
 1) Multiple buffers for the ftrace facility
 
 This feature has been requested by many people over the last few years.
 I even heard that Google was about to implement it themselves. I finally
 had time and cleaned up the code such that you can now create multiple
 instances of the ftrace buffer and have different events go to different
 buffers. This way, a low frequency event will not be lost in the noise
 of a high frequency event.
 
 Note, currently only events can go to different buffers, the tracers
 (ie. function, function_graph and the latency tracers) still can only
 be written to the main buffer.
 
 2) The function tracer triggers have now been extended.
 
 The function tracer had two triggers. One to enable tracing when a
 function is hit, and one to disable tracing. Now you can record a
 stack trace on a single (or many) function(s), take a snapshot of the
 buffer (copy it to the snapshot buffer), and you can enable or disable
 an event to be traced when a function is hit.
 
 3) A perf clock has been added.
 
 A "perf" clock can be chosen to be used when tracing. This will cause
 ftrace to use the same clock as perf uses, and hopefully this will make
 it easier to interleave the perf and ftrace data for analysis.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
 QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
 10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
 sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
 8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
 HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
 =W1n+
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Along with the usual minor fixes and clean ups there are a few major
  changes with this pull request.

   1) Multiple buffers for the ftrace facility

  This feature has been requested by many people over the last few
  years.  I even heard that Google was about to implement it themselves.
  I finally had time and cleaned up the code such that you can now
  create multiple instances of the ftrace buffer and have different
  events go to different buffers.  This way, a low frequency event will
  not be lost in the noise of a high frequency event.

  Note, currently only events can go to different buffers, the tracers
  (ie function, function_graph and the latency tracers) still can only
  be written to the main buffer.

   2) The function tracer triggers have now been extended.

  The function tracer had two triggers.  One to enable tracing when a
  function is hit, and one to disable tracing.  Now you can record a
  stack trace on a single (or many) function(s), take a snapshot of the
  buffer (copy it to the snapshot buffer), and you can enable or disable
  an event to be traced when a function is hit.

   3) A perf clock has been added.

  A "perf" clock can be chosen to be used when tracing.  This will cause
  ftrace to use the same clock as perf uses, and hopefully this will
  make it easier to interleave the perf and ftrace data for analysis."

* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
  tracepoints: Prevent null probe from being added
  tracing: Compare to 1 instead of zero for is_signed_type()
  tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
  ftrace: Get rid of ftrace_profile_bits
  tracing: Check return value of tracing_init_dentry()
  tracing: Get rid of unneeded key calculation in ftrace_hash_move()
  tracing: Reset ftrace_graph_filter_enabled if count is zero
  tracing: Fix off-by-one on allocating stat->pages
  kernel: tracing: Use strlcpy instead of strncpy
  tracing: Update debugfs README file
  tracing: Fix ftrace_dump()
  tracing: Rename trace_event_mutex to trace_event_sem
  tracing: Fix comment about prefix in arch_syscall_match_sym_name()
  tracing: Convert trace_destroy_fields() to static
  tracing: Move find_event_field() into trace_events.c
  tracing: Use TRACE_MAX_PRINT instead of constant
  tracing: Use pr_warn_once instead of open coded implementation
  ring-buffer: Add ring buffer startup selftest
  tracing: Bring Documentation/trace/ftrace.txt up to date
  tracing: Add "perf" trace_clock
  ...

Conflicts:
	kernel/trace/ftrace.c
	kernel/trace/trace.c
2013-04-29 13:55:38 -07:00
Linus Torvalds 0a82a8d132 Revert "block: add missing block_bio_complete() tracepoint"
This reverts commit 3a366e614d.

Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.

Jens says:
 "It's not quite clear why that is yet, so I think we should just revert
  the commit for 3.9 final (which I'm assuming is pretty close).

  The wifi is crap at the LSF hotel, so sending this email instead of
  queueing up a revert and pull request."

Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18 09:00:26 -07:00
Kent Overstreet 9ca8f8e510 Export blk_fill_rwbs()
Exported so it can be used by bcache's tracepoints

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
2013-03-23 15:53:52 -07:00
Steven Rostedt (Red Hat) 12883efb67 tracing: Consolidate max_tr into main trace_array structure
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:40 -04:00
Linus Torvalds ee89f81252 Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...
2013-02-28 12:52:24 -08:00
Shan Wei d8a0349c0c tracing: Use this_cpu_ptr per-cpu helper
typeof(&buffer) is a pointer to array of 1024 char, or char (*)[1024].
But, typeof(&buffer[0]) is a pointer to char which match the return type of get_trace_buf().
As well-known, the value of &buffer is equal to &buffer[0].
so return this_cpu_ptr(&percpu_buffer->buffer[0]) can avoid type cast.

Link: http://lkml.kernel.org/r/50A1A800.3020102@gmail.com

Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-21 13:22:30 -05:00
Tejun Heo 8c1cf6bb02 block: add @req to bio_{front|back}_merge tracepoints
bio_{front|back}_merge tracepoints report a bio merging into an
existing request but didn't specify which request the bio is being
merged into.  Add @req to it.  This makes it impossible to share the
event template with block_bio_queue - split it out.

@req isn't used or exported to userland at this point and there is no
userland visible behavior change.  Later changes will make use of the
extra parameter.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-01-14 15:00:36 +01:00
Tejun Heo 3a366e614d block: add missing block_bio_complete() tracepoint
bio completion didn't kick block_bio_complete TP.  Only dm was
explicitly triggering the TP on IO completion.  This makes
block_bio_complete TP useless for tracers which want to know about
bios, and all other bio based drivers skip generating blktrace
completion events.

This patch makes all bio completions via bio_endio() generate
block_bio_complete TP.

* Explicit trace_block_bio_complete() invocation removed from dm and
  the trace point is unexported.

* @rq dropped from trace_block_bio_complete().  bios may fly around
  w/o queue associated.  Verifying and accessing the assocaited queue
  belongs to TP probes.

* blktrace now gets both request and bio completions.  Make it ignore
  bio completions if request completion path is happening.

This makes all bio based drivers generate blktrace completion events
properly and makes the block_bio_complete TP actually useful.

v2: With this change, block_bio_complete TP could be invoked on sg
    commands which have bio's with %NULL bi_bdev.  Update TP
    assignment code to check whether bio->bi_bdev is %NULL before
    dereferencing.

Signed-off-by: Tejun Heo <tj@kernel.org>
Original-patch-by: Namhyung Kim <namhyung@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-01-14 15:00:36 +01:00
Stephen Boyd 234e340582 simple_open: automatically convert to simple_open()
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05 15:25:50 -07:00
Al Viro f4ae40a6a5 switch debugfs to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:56 -05:00
Paul Gortmaker 6e5fdeedca kernel: Fix files explicitly needing EXPORT_SYMBOL infrastructure
These files were getting <linux/module.h> via an implicit non-obvious
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:05 -04:00
Namhyung Kim c09c47caed blktrace: add FLUSH/FUA support
Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or
FUA follows WRITE, use the same 'F' flag for both cases and
distinguish them by their (relative) position. The end results
look like (other flags might be shown also):

 - WRITE:            W
 - WRITE_FLUSH:      FW
 - WRITE_FUA:        WF
 - WRITE_FLUSH_FUA:  FWF

Note that we reuse TC_BARRIER due to lack of bit space of act_mask
so that the older versions of blktrace tools will report flush
requests as barriers from now on.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-11 10:36:05 +02:00
Jens Axboe 49cac01e1f block: make unplug timer trace event correspond to the schedule() unplug
It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-16 13:51:05 +02:00
Jens Axboe 94b5eb28b4 block: fixup block IO unplug trace call
It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:12:19 +02:00
Jens Axboe d9c9783317 block: remove block_unplug_timer() trace point
We no longer have an unplug timer running, so no point in keeping
the trace point.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:06:33 +02:00
Tao Ma 805f6b5e1c blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.

For example, with a sync write after blkparse we get:
  8,16   1        1     0.001776503  7509  A  WS 1349632 + 1024 <- (8,17) 1347584
  8,16   1        2     0.001776813  7509  Q  WS 1349632 + 1024 [dd]
  8,16   1        3     0.001780395  7509  G  WS 1349632 + 1024 [dd]
  8,16   1        5     0.001783186  7509  I   W 1349632 + 1024 [dd]
  8,16   1       11     0.001816987  7509  D   W 1349632 + 1024 [dd]
  8,16   0        2     0.006218192     0  C   W 1349632 + 1024 [0]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.

With this patch, after a sync write we get:
  8,16   1        1     0.001776900  5425  A  WS 1189888 + 1024 <- (8,17) 1187840
  8,16   1        2     0.001777179  5425  Q  WS 1189888 + 1024 [dd]
  8,16   1        3     0.001780797  5425  G  WS 1189888 + 1024 [dd]
  8,16   1        5     0.001783402  5425  I  WS 1189888 + 1024 [dd]
  8,16   1       11     0.001817468  5425  D  WS 1189888 + 1024 [dd]
  8,16   0        2     0.005640709     0  C  WS 1189888 + 1024 [0]

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-11 20:11:59 +01:00
Tao Ma 2d3a8497f8 blktrace: Remove blk_fill_rwbs_rq.
If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409  [001]   160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.

With this patch, after a sync write we get:
write_test-2417  [000]   226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
 8 [write_test]

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-03 10:53:20 -05:00
Tao Ma 490da40d82 blktrace: Don't output messages if NOTIFY isn't set.
Now if we enable blktrace, cfq has too many messages output to the
trace buffer. It is fine if we don't specify any action mask.
But if I do like this:
blktrace /dev/sdb -a issue -a complete -o - | blkparse -i -
I only want to see 'D' and 'C', while with the following command
dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct

I will get(with a 2.6.37 vanilla kernel):
  8,16   0        0     0.000000000     0  m   N cfq3805 alloced
  8,16   0        0     0.000004126     0  m   N cfq3805 insert_request
  8,16   0        0     0.000004884     0  m   N cfq3805 add_to_rr
  8,16   0        0     0.000008417     0  m   N cfq workload slice:300
  8,16   0        0     0.000009557     0  m   N cfq3805 set_active wl_prio:0 wl_type:2
  8,16   0        0     0.000010640     0  m   N cfq3805 fifo=          (null)
  8,16   0        0     0.000011193     0  m   N cfq3805 dispatch_insert
  8,16   0        0     0.000012221     0  m   N cfq3805 dispatched a request
  8,16   0        0     0.000012802     0  m   N cfq3805 activate rq, drv=1
  8,16   0        1     0.000013181  3805  D   R 114759 + 8 [dd]
  8,16   0        2     0.000164244     0  C   R 114759 + 8 [0]
  8,16   0        0     0.000167997     0  m   N cfq3805 complete rqnoidle 0
  8,16   0        0     0.000168782     0  m   N cfq3805 set_slice=100
  8,16   0        0     0.000169874     0  m   N cfq3805 arm_idle: 8 group_idle: 0
  8,16   0        0     0.000170189     0  m   N cfq schedule dispatch
  8,16   0        0     0.000397938     0  m   N cfq3805 slice expired t=0
  8,16   0        0     0.000399763     0  m   N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8
  8,16   0        0     0.000400227     0  m   N cfq3805 del_from_rr
  8,16   0        0     0.000400882     0  m   N cfq3805 put_queue

See, there are 19 lines while I only need 2. I don't think it is
appropriate for a user.

So this patch will disable any messages if the BLK_TC_NOTIFY isn't set.
Now the output for the same command will look like:
  8,16   0        1     0.000000000  4908  D   R 114759 + 8 [dd]
  8,16   0        2     0.000146827     0  C   R 114759 + 8 [0]

Yes, it is what I want to see.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Jens Axboe 797a455d2c block: ensure that completion error gets properly traced
We normally just use the BIO_UPTODATE flag to signal 0/-EIO. If
we have more information available, we should pass that along to
the trace output.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-10 09:06:44 +01:00
Mathieu Desnoyers 23036f1a34 blktrace: add missing probe argument to block_bio_complete
blktrace.c block bio complete callback needs to gain a new argument to reflect
the newly added "error" tracepoint argument. This is needed to match the new
block_bio_complete TRACE_EVENT as of
commit de983a7bfcb7c020901ca6e2314cf55a4207ab5a.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Jeff Moyer <jmoyer@redhat.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07 08:53:58 +01:00
Mike Snitzer d07335e51d block: Rename "block_remap" tracepoint to "block_bio_remap" to clarify the event.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-16 12:53:39 +01:00
Christoph Hellwig 02e031cbc8 block: remove REQ_HARDBARRIER
REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:54:09 +01:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Arnd Bergmann 01b284f9b6 blktrace: remove the big kernel lock
According to Jens, this code does not need the BKL at all,
it is sufficiently serialized by bd_mutex.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2010-10-19 11:29:57 +02:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Adrian Hunter 8d57a98ccd block: add secure discard
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:30 -07:00
Arnd Bergmann 62c2a7d969 block: push BKL into blktrace ioctls
The blktrace driver currently needs the BKL, but
we should not need to take that in the block layer,
so just push it down into the driver itself.

It is quite likely that the BKL is not actually
required in blktrace code and could be removed
in a follow-on patch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:26:08 +02:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Christoph Hellwig 33659ebbae block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:17:56 +02:00
Randy Dunlap 546cf44a1b blktrace: Fix new kernel-doc warnings
Fix blktrace.c kernel-doc warnings:
 Warning(kernel/trace/blktrace.c:858): No description found for parameter 'ignore'
 Warning(kernel/trace/blktrace.c:890): No description found for parameter 'ignore'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100529114507.c466fc1e.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-31 09:58:20 +02:00
Steven Rostedt a9a5776380 tracing: Allow events to share their print functions
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.

The event itself is now passed to the print function to let the print
function know what kind of event it should print.

This opens the door to consolidating the way several events print
their output.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint

This change slightly increases the size but is needed for the next change.

v3: Fix the branch tracer events to handle this change.

v2: Fix the new function graph tracer event calls to handle this change.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:32 -04:00
Steven Rostedt 38516ab59f tracing: Let tracepoints have data passed to tracepoint callbacks
This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 09:50:34 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dmitry Monakhov 9a8c28c831 blktrace: perform cleanup after setup error
Currently even if BLKTRACESETUP ioctl has failed user must call
BLKTRACETEARDOWN to be shure what all staff was cleaned, which
is contr-intuitive.
Let's setup ioctl make necessery cleanup by it self.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-28 19:47:19 +01:00
Jun'ichi Nomura b0da3f0dad Add a tracepoint for block request remapping
Since 2.6.31 now has request-based device-mapper, it's useful to have
a tracepoint for request-remapping as well as bio-remapping.
This patch adds a tracepoint for request-remapping, trace_block_rq_remap().

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:19:34 +02:00
Zdenek Kabelac 48c0d4d4c0 Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs
Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs
introduced in commit 1d54ad6da9.
Release kobject also in case the request_fn is NULL.

Problem was noticed via kmemleak backtrace when some sysfs entries were
note properly destroyed during  device removal:

unreferenced object 0xffff88001aa76640 (size 80):
  comm "lvcreate", pid 2120, jiffies 4294885144
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 f0 65 a7 1a 00 88 ff ff  .........e......
    90 66 a7 1a 00 88 ff ff 86 1d 53 81 ff ff ff ff  .f........S.....
  backtrace:
    [<ffffffff813f9cc6>] kmemleak_alloc+0x26/0x60
    [<ffffffff8111d693>] kmem_cache_alloc+0x133/0x1c0
    [<ffffffff81195891>] sysfs_new_dirent+0x41/0x120
    [<ffffffff81194b0c>] sysfs_add_file_mode+0x3c/0xb0
    [<ffffffff81197c81>] internal_create_group+0xc1/0x1a0
    [<ffffffff81197d93>] sysfs_create_group+0x13/0x20
    [<ffffffff810d8004>] blk_trace_init_sysfs+0x14/0x20
    [<ffffffff8123f45c>] blk_register_queue+0x3c/0xf0
    [<ffffffff812447e4>] add_disk+0x94/0x160
    [<ffffffffa00d8b08>] dm_create+0x598/0x6e0 [dm_mod]
    [<ffffffffa00de951>] dev_create+0x51/0x350 [dm_mod]
    [<ffffffffa00de823>] ctl_ioctl+0x1a3/0x240 [dm_mod]
    [<ffffffffa00de8f2>] dm_compat_ctl_ioctl+0x12/0x20 [dm_mod]
    [<ffffffff81177bfd>] compat_sys_ioctl+0xcd/0x4f0
    [<ffffffff81036ed8>] sysenter_dispatch+0x7/0x2c
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:46 +02:00
Ingo Molnar ed011b22ce Merge commit 'v2.6.31-rc9' into tracing/core
Merge reason: move from -rc5 to -rc9.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-06 06:11:42 +02:00
Steven Rostedt e77405ad80 tracing: pass around ring buffer instead of tracer
The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.

This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 18:59:39 -04:00
Alan D. Brunelle 39cbb602b5 Remove double removal of blktrace directory
commit fd51d251e4
Author: Stefan Raspl <raspl@linux.vnet.ibm.com>
Date:   Tue May 19 09:59:08 2009 +0200

    blktrace: remove debugfs entries on bad path

added in an explicit invocation of debugfs_remove for bt->dir, in
blk_remove_buf_file_callback we are also getting the directory removed. On
occasion I am seeing memory corruption that I have bisected down to
this commit. [The testing involves a (long) series of I/O benchmarks
with blktrace invoked around the actual runs.] I believe that this
committed patch is correct, but the problem actually lies in the code
in blk_remove_buf_file_callback.

With this patch I am able to consistently get complete runs whereas
previously I could not get a single run to complete.

The first part of the patch simply moves the debugfs_remove below the
relay_close: the relay_close call will remove files under bt->dir, and
so we should not remove the directory until all the files we created
have been removed. (Note: This is not sufficient to fix the problem -
the file system code has ref counts on the directoy, so our invocation
does not cause the directory to actually be removed. Nonetheless, we
should not rely upon that feature.)

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-08-12 18:50:08 +02:00
Alexey Dobriyan 405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Linus Torvalds c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Li Zefan 55782138e4 tracing/events: convert block trace points to TRACE_EVENT()
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:34:23 -04:00
Stefan Raspl fd51d251e4 blktrace: remove debugfs entries on bad path
debugfs directory entries for devices are not removed on some
of the failure pathes in do_blk_trace_setup().
One way to reproduce is to start blktrace on multiple devices
with insufficient Vmalloc space: Devices will fail with
a message like this:

	BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error

If so, the respective entries in debugfs
(e.g. /sys/kernel/debug/block/sdu) will remain and subsequent
attempts to start blktrace on the respective devices will not
succeed due to existing directories.

[ Impact: fix /debug/tracing file cleanup corner case ]

Signed-off-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-19 10:29:21 +02:00
Li Zefan 0498625793 blktrace: pdu_buf of pc events should be unsigned
I got this:
  8,0    1   305.417782332  2037  I   R 32 (ffffff9e 10 00 ...) [bash]

It should be:
  8,0    1   305.417782332  2037  I   R 32 (9e 10 00 ...) [bash]

[ Impact: fix output of pc events ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A07C6B3.9080802@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 12:25:50 +02:00
Tejun Heo 2e46e8b27a block: drop request->hard_* and *nr_sectors
struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo 5b93629b45 block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Alan D. Brunelle 22a7c31a96 blktrace: from-sector redundant in trace_block_remap
Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.

[ Impact: cleanup ]

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF517C.7000503@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 14:13:01 +02:00
Alan D. Brunelle a42aaa3bbc blktrace: correct remap names
This attempts to clarify names utilized during block I/O remap
operations (partition, volume manager). It correctly matches up the
/from/ information for both device & sector. This takes in the concept
from Kosaki Motohiro and extends it to include better naming for the
"device_from" field.

[ Impact: cleanup ]

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF4FAE.3000301@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 14:13:00 +02:00
Li Zefan f3948f8857 blktrace: fix context-info when mixed-using blk tracer and trace events
When current tracer is set to blk tracer, TRACE_ITER_CONTEXT_INFO is
unset, but actually context-info is printed:

    pdflush-431   [000]   821.181576:   8,0    P   N [pdflush]

And then if we enable TRACE_ITER_CONTEXT_INFO:

    # echo context-info > trace_options

We'll see context-info printed twice. What's worse, when we use blk
tracer and trace events at the same time, we'll see no context-info
for trace events at all:

    jbd2_commit_logging: dev dm-0:8 transaction 333227
    jbd2_end_commit: dev dm-0:8 transaction 333227 head 332814
      rm-25433 [001]  9578.307485:   8,18   m   N cfq25433 slice expired t=0
      rm-25433 [001]  9578.307486:   8,18   m   N cfq25433 put_queue

This patch adds blk_tracer->set_flags(), and context-info flag is unset
only when we set the output to classic mode.

Note after this patch, one should unset context-info explicitly if he
wants to get binary output that can be parsed by blkparse:

    # echo nocontext-info > trace_options
    # echo bin > trace_options
    # echo blk > current_tracer
    # cat trace_pipe | blkparse -i -

Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E54E60.50408@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-16 10:11:01 +02:00