Commit Graph

185 Commits

Author SHA1 Message Date
Joachim Eastwood be68bf8831 clk: Add clk_hw_is_enabled() for use by clk providers
Add clk_hw_is_enabled() to the provider APIs so clk providers can
use a struct clk_hw instead of a struct clk to check if a clk is
enabled or not.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-26 12:36:55 -07:00
Julia Lawall 6bc9d9d62c clk: add missing of_node_put
for_each_matching_node_and_match performs an of_node_get on each iteration,
so a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e1,e2,e;
local idexpression np;
@@

 for_each_matching_node_and_match(np, e1, e2) {
   ... when != of_node_put(np)
       when != e = np
(
   return np;
|
+  of_node_put(np);
?  return ...;
)
   ...
 }
// </smpl>

Besides the problem identified by the semantic patch, this patch adds an
of_node_get in front of saving np in a field of parent, to account for the
fact that this value will be put on going on to the next element in the
iteration, and then adds of_node_puts in the two loops where the parent
pointer can be freed.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-21 16:16:32 -07:00
Geert Uytterhoeven b76281cb97 clk: Make clk input parameter of __clk_get_name() const
When calling __clk_get_name() on a const clock:

    warning: passing argument 1 of '__clk_get_name' discards 'const' qualifier from pointer target type
    include/linux/clk-provider.h:613:13: note: expected 'struct clk *' but argument is of type 'const struct clk *'

__clk_get_name() does not modify the passed clock, hence make it const.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-16 11:56:19 -07:00
Geert Uytterhoeven 7e96353c3f clk: Use %u to format unsigned int in of_clk_src_onecell_get()
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-16 11:49:01 -07:00
Stephen Boyd 0a4807c2f9 clk: Make of_clk_get_parent_name() robust with #clock-cells = 1
If a clock provider has #clock-cells = 1 and we call
of_clk_get_parent_name() on it we may end up returning the name
of the provider node if the provider doesn't have a
clock-output-names property. This doesn't make sense, especially
when you consider that calling of_clk_get_parent_name() on such a
node with different indices will return the same name each time.

Let's try getting the clock from the framework via of_clk_get()
instead, and only fallback to the node name if we have a provider
with #clock-cells = 0. This way, we can't hand out the same name
for different clocks when we don't actually know their names.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-15 16:17:03 -07:00
Stephen Boyd ab5c342992 Merge branch 'clk-fixes' into clk-next
* clk-fixes:
  drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x
  clk: check for invalid parent index of orphans in __clk_init()
2015-09-17 12:28:41 -07:00
Javier Martinez Canillas 90c53547fc clk: Remove unneeded semicolons
There are cleary typo errors so can be removed.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-17 11:15:14 -07:00
Mans Rullgard 9054a31d60 clk: check for invalid parent index of orphans in __clk_init()
If a mux clock is initialised (by hardware or firmware) with an
invalid parent, its ->get_parent() can return an out of range
index.  For example, the generic mux clock attempts to return
-EINVAL, which due to the u8 return type ends up a rather large
number.  Using this index with the parent_names[] array results
in an invalid pointer and (usually) a crash in the following
strcmp().

This patch adds a check for the parent index being in range,
ignoring clocks reporting invalid values.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Tested-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-16 15:35:18 -07:00
Dong Aisheng c660b2ebb2 clk: remove duplicated code with __clk_set_parent_after
__clk_set_parent_after() actually used the second argument then we
could put this duplicate logic in there and call it with a different
order of arguments in the success vs. error paths in this function.

Cc: Mike Turquette <mturquette@linaro.org>
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:49:13 -07:00
Stephen Boyd e7df6f6e21 clk: Constify clk_hw argument to provider APIs
We don't modify the clk_hw argument in these functions, so it's
safe to mark it as const.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:49:11 -07:00
Stephen Boyd fc4a05d4b0 clk: Remove unused provider APIs
Remove these APIs now that we've converted all users to the
replacement struct clk_hw based versions.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:49:02 -07:00
Stephen Boyd 1a9c069cb2 clk: Add clk_hw_*() APIs for use by clk providers
clk providers shouldn't need to use the consumer APIs (clk.h).
Add provider APIs to replace the __clk_*() APIs that take a
struct clk_hw as their first argument instead of a struct clk.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:48:42 -07:00
Heiko Stuebner e6500344ed clk: track the orphan status of clocks and their children
While children of orphan clocks are not carried in the orphan-list itself,
they're nevertheless orphans in their own right as they also don't have an
input-rate available. To ease tracking if a clock is an orphan or has an
orphan in its parent path introduce an orphan field into struct clk and
update it and the fields in child-clocks when a clock gets added or removed
from the orphan-list.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: kernel@pengutronix.de
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Barry Song <baohua@kernel.org>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
Cc: emilio@elopez.com.ar
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
[sboyd@codeaurora.org: s/clk/core/ in new function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-12 00:59:18 -07:00
Stephen Boyd a57aa18539 clk: Silence warnings about lock imbalances
The recursive spinlock implementation trips up sparse and it
complains that these functions have lock imbalances. That isn't
really true though, so add some __acquires() and __releases()
information so that sparse is quiet.

drivers/clk/clk.c:116:22: warning: context imbalance in 'clk_enable_lock' - wrong count at exit
drivers/clk/clk.c:141:9: warning: context imbalance in 'clk_enable_unlock' - unexpected unlock

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:59:30 -07:00
Stephen Boyd 9cfad9bc47 Merge branch 'cleanup-clk-h-includes' into clk-next
* cleanup-clk-h-includes: (62 commits)
  clk: Remove clk.h from clk-provider.h
  clk: h8300: Remove clk.h and clkdev.h includes
  clk: at91: Include clk.h and slab.h
  clk: ti: Switch clk-provider.h include to clk.h
  clk: pistachio: Include clk.h
  clk: ingenic: Include clk.h
  clk: si570: Include clk.h
  clk: moxart: Include clk.h
  clk: cdce925: Include clk.h
  clk: Include clk.h in clk.c
  clk: zynq: Include clk.h
  clk: ti: Include clk.h
  clk: sunxi: Include clk.h and remove unused clkdev.h includes
  clk: st: Include clk.h
  clk: qcom: Include clk.h
  clk: highbank: Include clk.h
  clk: bcm: Include clk.h
  clk: versatile: Remove clk.h and clkdev.h includes
  clk: ux500: Remove clk.h and clkdev.h includes
  clk: tegra: Properly include clk.h
  ...
2015-07-28 11:59:09 -07:00
Stephen Boyd 9783c0d985 clk: Allow providers to configure min/max rates
clk providers are using the consumer APIs to set min/max rates on
the clock they're providing. To encourage clk providers to move
away from the consumer APIs, add a provider API to set the
min/max rate of a clock. The assumption is that this is done
before the clock can be requested via clk_get() and that the
clock rate is already within the boundaries of the min/max that's
configured.

Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:50 -07:00
Stephen Boyd 19aab27308 Merge branch 'clk-determine-rate-struct' into clk-next
* clk-determine-rate-struct:
  clk: fix some determine_rate implementations
  clk: change clk_ops' ->determine_rate() prototype
2015-07-28 11:51:30 -07:00
Boris Brezillon 57d866e606 clk: fix some determine_rate implementations
Some determine_rate implementations are not returning an error
when they failed to adapt the rate according to the rate request.
Fix them so that they return an error instead of silently
returning 0.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27 18:13:32 -07:00
Boris Brezillon 0817b62cc0 clk: change clk_ops' ->determine_rate() prototype
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27 18:12:01 -07:00
Stephen Boyd 3c37311730 clk: Include clk.h in clk.c
This file implements the clk API and so it should include clk.h
directly instead of indirectly including it through
clk-provider.h.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:30 -07:00
Stephen Boyd 2573a02aa5 clk: Move clk_provider_list to scope of function using it
The list isn't used after of_clk_init() is called, so we don't
need to keep an empty list around after init. Put the list on the
stack.

Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 17:20:05 -07:00
Stephen Boyd 2e3b19f137 clk: Check for allocation errors in of_clk_init()
Dan Carpenter reports that we don't check the allocation here for
failure. Add a failure check and free any previously allocated
providers from the clk_provider_list.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 17:20:03 -07:00
Michael Turquette 2cd7b04328 clk: tegra: Changes for v4.2-rc1
This contains the EMC clock driver that's been exhaustively reviewed and
 tested. It also includes a change to the clock core that allows a clock
 provider to perform low-level reparenting of clocks. This is required by
 the EMC clock driver because the reparenting needs to be done at a very
 specific point in time during the EMC frequency switch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVU1EDAAoJEN0jrNd/PrOhYO8QAKDSJXdoVqtQITU3lUDfTB7i
 g7EJfL8PjT5i1KTjJHT7/2FFuQlb7eeJexyNV539sIJtUrcDOl6qNVbq/FYNouia
 bF7XqOxbR8QpWsYbQ46bzbwBaDd+CPLDwjSounNf6G4kJQy7/9SVr6BBPbLa2LIS
 xzxMzr2+/CCmH9P1p2I5ey5f1fQ75DKaz8RGgv3FcltdkKNZQCTa+hthCOdicNJu
 BoVHqXgJZvz0tgZk0zdCrKyUi31Gu8CNmFad7jtIS01EHGjBpgSE9m7ViYYRCFl5
 GIjVh5IryCg2LJt8JP2mPCFNyiAvjxzMt/hJquzj2x2QMKrK8wgC3BwlrMUPuhkM
 xkldCMXY1ImVgTbwFdAEFR08+/VybzfLu4FDZSdG4IeNKfMj0n3EirAX9gE1VHDl
 bofkPZsE2Vr4N3jYekjbql3m9ZO8WsnIRz7D/Rd1OIqNyMA3xZQz79zgqQ5EQsB1
 +GJztoyIdDikefCAww/z7I+vTTQ8InV/FnuzKN/SyqqLe5Ni9TFg6sCN50cnW2Ps
 /wHE0KAEV6Oem0dNOISCd3cx231FAiCKQBSm0sUl0cAQ+x1E/NKs6H7vC0wrvWOo
 f7072+BesVG9FPpWUg/lAD95YlPcoFdTDUep9J6mX2RB5ZfVEr9gNN04dY3tt4g2
 kl37UB2qRXX0aEdkTWm2
 =I0gO
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.2-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

clk: tegra: Changes for v4.2-rc1

This contains the EMC clock driver that's been exhaustively reviewed and
tested. It also includes a change to the clock core that allows a clock
provider to perform low-level reparenting of clocks. This is required by
the EMC clock driver because the reparenting needs to be done at a very
specific point in time during the EMC frequency switch.
2015-06-20 13:29:48 -07:00
Michael Turquette 85e88fab13 Merge branch 'clk-exynos-cpu-clk' into clk-next
Folded into this merge commit is a build error fix: s/clk/core in
clk_change_rate due to the new struct clk_core
2015-06-20 13:26:40 -07:00
Bartlomiej Zolnierkiewicz d8d919879e clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support
This flag is needed to fix the issue with wrong dividers being setup
by Common Clock Framework when using the new Exynos cpu clock support.

The issue happens because clk_core_set_rate_nolock()  calls
clk_calc_new_rates(clk, rate) before both pre/post clock notifiers have
a chance to run.  In case of Exynos cpu clock support pre/post clock
notifiers are registered for mout_apll clock which is a parent of armclk
cpu clock and dividers are modified in both pre and post clock notifier.
This results in wrong dividers values being later programmed by
clk_change_rate(top).  To workaround the problem CLK_RECALC_NEW_RATES
flag is added and it is set for mout_apll clock later so the correct
divider values are re-calculated after both pre and post clock notifiers
had run.

For example when using "performance" governor on Exynos4210 Origen board
the cpufreq-dt driver requests to change the frequency from 1000MHz to
1200MHz and after the change state of the relevant clocks is following:

Without use of CLK_GET_RATE_NOCACHE flag:

 fout_apll rate: 1200000000
         fout_apll_div_2 rate: 600000000
                 mout_clkout_cpu rate: 600000000
                         div_clkout_cpu rate: 600000000
                                 clkout_cpu rate: 600000000
         mout_apll rate: 1200000000
                 armclk rate: 1200000000
                 mout_hpm rate: 1200000000
                         div_copy rate: 300000000
                                 div_hpm rate: 300000000
                 mout_core rate: 1200000000
                         div_core rate: 1200000000
                                 div_core2 rate: 1200000000
                                         arm_clk_div_2 rate: 600000000
                                         div_corem0 rate: 300000000
                                         div_corem1 rate: 150000000
                                         div_periph rate: 300000000
                         div_atb rate: 300000000
                                 div_pclk_dbg rate: 150000000
                 sclk_apll rate: 1200000000
                         sclk_apll_div_2 rate: 600000000

With use of CLK_GET_RATE_NOCACHE flag:

 fout_apll rate: 1200000000
         fout_apll_div_2 rate: 600000000
                 mout_clkout_cpu rate: 600000000
                         div_clkout_cpu rate: 600000000
                                 clkout_cpu rate: 600000000
         mout_apll rate: 1200000000
                 armclk rate: 1200000000
                 mout_hpm rate: 1200000000
                         div_copy rate: 200000000
                                 div_hpm rate: 200000000
                 mout_core rate: 1200000000
                         div_core rate: 1200000000
                                 div_core2 rate: 1200000000
                                         arm_clk_div_2 rate: 600000000
                                         div_corem0 rate: 300000000
                                         div_corem1 rate: 150000000
                                         div_periph rate: 300000000
                         div_atb rate: 240000000
                                 div_pclk_dbg rate: 120000000
                 sclk_apll rate: 150000000
                         sclk_apll_div_2 rate: 75000000

Without this change cpufreq-dt driver showed ~10 mA larger energy
consumption when compared to cpufreq-exynos one when "performance"
cpufreq governor was used on Exynos4210 SoC based Origen board.

This issue was probably meant to be workarounded by use of
CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in
the original Exynos cpu clock patchset (in "[PATCH v12 6/6] clk:
samsung: remove unused clock aliases and update clock flags" patch)
but usage of these flags is not sufficient to fix the issue observed.

Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20 12:17:41 -07:00
Maxime Coquelin 8c9a8a8f71 clk: Move debug_node field under DEBUG_FS flag in struct clk_core
The debug_node field is only used when DEBUG_FS config is selected,
so declare it only if DEBUG_FS is selected.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:21:22 -07:00
Dinh Nguyen 2e61dfb360 clk: of: helper for filling parent clock array and return num of parents
Sprinkled all through the platform clock drivers are code like this to
fill the clock parent array:

for (i = 0; i < num_parents; ++i)
	parent_names[i] = of_clk_get_parent_name(np, i);

The of_clk_parent_fill() will do the same as the code above, and while
at it, return the number of parents as well since the logic of the
function is to the walk the clock node to look for the parent.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
[sboyd@codeaurora.org: Fixed kernel-doc]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-05 18:10:33 -07:00
Shailendra Verma a59a516398 clk: Fix typo in clk_register() comment
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-20 15:44:32 -07:00
Stephen Boyd 562ef0b098 clk: Silence sparse warnings about __clk_{get,put}()
drivers/clk/clk.c:2700:5: warning: symbol '__clk_get' was not declared. Should it be static?
drivers/clk/clk.c:2713:6: warning: symbol '__clk_put' was not declared. Should it be static?

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:17 -07:00
Tomeu Vizoso 42c86547f4 clk: Expose clk_hw_reparent() to providers
To be used by clock implementations for switching to a new parent during
rate change.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 15:17:08 +02:00
Stephen Boyd a633472519 clk: Add some more lockdep assertions
We don't check to make sure the enable_lock is held across
enable/disable and we don't check if the prepare_lock is held
across prepare/unprepare. Add some asserts to catch any future
locking problems.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-07 11:32:54 -07:00
Stephen Boyd 18e70efe3e Merge branch 'clk-fixes' into clk-next 2015-05-07 11:32:49 -07:00
Felipe Balbi 70e9f4dde0 clk: add newline character after dumping all clocks
clk_dump() will dump data about all clocks in JSON
format, but it misses a newline character at the
end of the JSON string. This patch adds that missing
newline character.

Signed-off-by: Felipe Balbi <balbi@ti.com>
[sboyd@codeaurora.org: Squelch checkpatch with seq_puts()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-07 11:32:37 -07:00
Dong Aisheng d2a5d46b16 clk: add missing lock when call clk_core_enable in clk_set_parent
Before commit 035a61c314 ("clk: Make clk API return per-user
struct clk instances") we acquired the enable_lock in
__clk_set_parent_{before,after}() by means of calling
clk_enable(). After commit 035a61c314 we use clk_core_enable()
in place of the clk_enable(), and clk_core_enable() doesn't
acquire the enable_lock. This opens up a race condition between
clk_set_parent() and clk_enable(). Fix it.

Fixes: 035a61c314 ("clk: Make clk API return per-user struct clk instances")
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-06 16:58:53 -07:00
Stefan Wahren 7cb81136d2 clk: Fix JSON output in debugfs
key/value pairs in a JSON object must be separated by a comma.
After adding the properties "accuracy" and "phase" the JSON output
of /sys/kernel/debug/clk/clk_dump is invalid.

So add the missing commas to fix it.

Fixes: 5279fc402a ("clk: add clk accuracy retrieval support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
[sboyd@codeaurora.org: Added comment in function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-01 18:25:08 -07:00
Stephen Boyd 6e5ab41b10 clk: Update some comments to reflect reality
The debugfs clk directory no longer expresses a clk tree. Update
the comments around that apporiately. Also drop comments about
prepare locks needing to be held as we have the proper
annotations with lockdep_assert_held().

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:41 -07:00
Stephen Boyd 4dff95dc94 clk: Remove forward declared function prototypes
Move the code around so that we don't need to declare function
prototypes at the start of the file. Simplify
clk_core_is_prepared() and clk_core_is_enabled() too to make the
diff easier to read.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:39 -07:00
Stephen Boyd 1f3e198342 clk: Remove impossible if condition in clk_core_get_phase()
This condition can't ever be true because this function is static
and it's always called with a non-NULL pointer.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:37 -07:00
Stephen Boyd d7d131512b clk: Drop unnecessary OOM prints
We don't need to print error messages when allocations fail.
We'll get a nice backtrace in such situations anyway.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:35 -07:00
Dong Aisheng 864e160ae5 clk: Squash __clk_{enable,disable}() into callers
These functions are only used in one place. Let's squash them
into their respective callers to save some lines.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
[sboyd@codeaurora.org: Redo commit text, add NULL check in
clk_enable()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:33 -07:00
Stephen Boyd d6968fca78 clk: s/clk/core/ for struct clk_core
While introducing struct clk_core we tried to minimize the diff
by changing the type of 'clk' variables from struct clk to struct
clk_core without changing the names of the variables. Now that
the split is complete, the code is slightly confusing when it
mixes variables called 'clk' and variables called 'core' that are
of the same type struct clk_core. Let's be consistent and use
'core' everywhere we have a struct clk_core pointer and 'clk'
when we have a struct clk pointer.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:24 -07:00
Boris Brezillon 03bc10ab5b clk: check ->determine/round_rate() return value in clk_calc_new_rates
->determine_rate() and ->round_rate() can return the closest rate to the
requested one or an error code.
clk_calc_new_rates is assuming these functions can't return a negative
value, which leads to a undefined behavior when the clk implementation
returns such an error code.
Fix this by returning NULL in case ->determine_rate() or ->round_rate()
returned an error code.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-04-12 21:09:49 -07:00
Stephen Boyd 5cf065f556 Merge branch 'clk-fixes' into clk-next 2015-03-12 12:20:36 -07:00
Stephen Boyd 306c342f9c clk: Replace of_clk_get_by_clkspec() with of_clk_get_from_provider()
of_clk_get_by_clkspec() has the same function signature as
of_clk_get_from_provider()

 struct clk *of_clk_get_by_clkspec(struct of_phandle_args
 *clkspec)
 struct clk *of_clk_get_from_provider(struct of_phandle_args
 *clkspec)

except of_clk_get_by_clkspec() checks to make sure clkspec is not
NULL. Let's remove of_clk_get_by_clkspec() and replace the
callers of it (clkconf.c) with of_clk_get_from_provider().

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-12 12:20:34 -07:00
Stephen Boyd 50595f8b9e clk: Rename child_node to clks_node to avoid confusion
The child_node member of struct clk is named the same as the
child_node member of struct clk_core. Let's rename the struct
clk's member to clks_node to avoid getting confused with the
child_node member of struct clk_core and to match the name of the
list head, clks.

Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Alban Browaeys <alban.browaeys@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-12 12:20:32 -07:00
Stephen Boyd b61c43c09f clk: clk_set_parent() with current parent shouldn't fail
If a driver calls clk_set_parent(clk, parent) and parent is the
current parent of clk we shouldn't fail in any case.
Unfortunately if clk is a read-only mux we return -ENOSYS
because we think we can't change the parent, except for in this
special case where we don't actually need to change the parent at
all. Return 0 in such a situation.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-03-12 12:18:53 -07:00
Stephen Boyd dfc202ead3 clk: Add tracepoints for hardware operations
It's useful to have tracepoints around operations that change the
hardware state so that we can debug clock hardware performance
and operations. Four basic types of events are supported: on/off
events for enable, disable, prepare, unprepare that only record
an event and a clock name, rate changing events for
clk_set_{min_,max_}rate{_range}(), phase changing events for
clk_set_phase() and parent changing events for clk_set_parent().

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-03-12 12:18:51 -07:00
Stephen Boyd 08b9575660 clk: Missing set_phase op is an error
If a clock's clk_ops doesn't have the set_phase op set we should
return an error from clk_set_phase(). This way clock consumers
know that when they tried to set a phase it didn't work, as
opposed to the current behavior where the return value is 0
meaning success.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-03-12 12:18:49 -07:00
Krzysztof Kozlowski 496eadf821 clk: Use lockdep asserts to find missing hold of prepare_lock
Add lockdep asserts for holding the prepare_lock to all functions
marking this as a requirement in description. Add this to private and
exported functions so all locking misuse could be detected during
debugging.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-03-12 12:18:45 -07:00
Michael Turquette 3d3801effd clk: introduce clk_is_match
Some drivers compare struct clk pointers as a means of knowing
if the two pointers reference the same clock hardware. This behavior is
dubious (drivers must not dereference struct clk), but did not cause any
regressions until the per-user struct clk patch was merged. Now the test
for matching clk's will always fail with per-user struct clk's.

clk_is_match is introduced to fix the regression and prevent drivers
from comparing the pointers manually.

Fixes: 035a61c314 ("clk: Make clk API return per-user struct clk instances")
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@codeaurora.org: const arguments to clk_is_match() and
remove unnecessary ternary operation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 15:56:59 -07:00