The "pixfmt" parameter of the struct soc_camera_host_ops::set_bus_param()
method is redundant, because at the time, when this method is called,
pixfmt is guaranteed to be equal to icd->current_fmt->host_fmt->fourcc.
Remove this parameter and update all drivers accordingly.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Before this patch the resulting values from a try_fmt were different then
those from a s_fmt with the same parameters. try_fmt simply did not
touch / fill some values like bytesperline at all.
This patch also corrects bytesperline to the proper value for a planar
format such as the YUV420P format the pwc driver produces, which is
the bytesperline value for the biggest plane, rather then those
of all planes added together.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of making this a module parameter, automatically fallback to
higher compression settings if there is not enough bandwidth.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The pwc driver claims to support any resolution between 160x120
and 640x480, but emulates this by simply drawing a black border
around the image. Userspace can draw its own black border if it
really wants one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This stems from the v4l1 era, with v4l2 everything can be done with
standardized v4l2 API calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The in kernel version of the pwc driver has never supported snapshot
mode, and now that we no longer support the pixfmt.priv abuse there also
no longer is a way for userspace to request it, rendering all the code in
question dead (never called), so remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The .priv field never was intended for this, setting a framerate is
support using the standardized S_PARM ioctl.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Setting pan/tilt should be done with v4l2 controls, like with other
cams. The button is available as a standard input device
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
So that events get generated for the new red + blue bal values when switching
to a preset. This allows apps to solely rely on events instead of needing
to do a query + g_ctrl on all controls when a control with the update flag
set is gets set or gets an event.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While testing gtk-v4l's new ctrl event code, I hit the following deadlock
in the pwc driver:
Thread 1:
-Does a VIDIOC_G_CTRL
-video2_ioctl takes the modlock
-video2_ioctl calls v4l2_g_ctrl
-v4l2_g_ctrl takes the ctrl_handler lock
-v4l2_g_ctrl calls pwc_g_volatile_ctrl
-pwc_g_volatile_ctrl releases the modlock as the usb transfer can take a
significant amount of time and we don't want to block DQBUF / QBUF too long
Thread 2:
-Does a VIDIOC_FOO_CTRL
-video2_ioctl takes the modlock
-video2_ioctl calls v4l2_foo_ctrl
-v4l2_foo_ctrl blocks while trying to take the ctrl_handler lock
Thread 1:
-Blocks while trying to re-take the modlock, as its caller will eventually
unlock that
Now we have thread 1 waiting for the modlock while holding the ctrl_handler
lock and thread 2 waiting for the ctrl_handler lock while holding the
modlock -> deadlock.
Conclusion:
1) We cannot unlock modlock from pwc_s_ctrl / pwc_g_volatile_ctrl,
but this can cause QBUF / DQBUF to block for up to a full second
2) After evaluating various option I came to the conclusion that pwc should
stop using the v4l2 core locking, and instead do its own locking
Thus this patch stops pwc using the v4l2 core locking, and replaces that with
it doing its own locking where necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently auto white balance speed and delay are only available through custom
ioctls, which are deprecated and will be going away in 3.3 .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is a preperation patch for adding support for control events. Actually
enabling support for control events will be done in a separate patch, as that
depends on the necessary poll changes going upstream
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Somehow the code has ended up assuming 1400 packets/sec which of course
is wrong for usb1 devices like the ov511 cameras. usb1 only does 1000
(isoc) packets / sec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This got broken by some gscpa core fixes, this patch restores the proper
min/max values for these controls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Written by Theodore Kilgore
With minor changes by Hans de Goede:
-Code style fixes
-Correct the verbose level on various PDEBUG messages
-Make error messages use pr_err instead of PDEBUG
-Document the jl20 pixel format
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* tag 'v3.2': (83 commits)
Linux 3.2
minixfs: misplaced checks lead to dentry leak
ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach
ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race
Revert "rtc: Expire alarms after the time is set."
[CIFS] default ntlmv2 for cifs mount delayed to 3.3
cifs: fix bad buffer length check in coalesce_t2
Revert "rtc: Disable the alarm in the hardware"
hung_task: fix false positive during vfork
security: Fix security_old_inode_init_security() when CONFIG_SECURITY is not set
fix CAN MAINTAINERS SCM tree type
mwifiex: fix crash during simultaneous scan and connect
b43: fix regression in PIO case
ath9k: Fix kernel panic in AR2427 in AP mode
CAN MAINTAINERS update
net: fsl: fec: fix build for mx23-only kernel
sch_qfq: fix overflow in qfq_update_start()
drm/radeon/kms/atom: fix possible segfault in pm setup
gspca: Fix falling back to lower isoc alt settings
futex: Fix uninterruptible loop due to gate_area
...
This patch implements necessary changes for enabling dm365 and
dm355 hardware for vpbe. The patch contains additional HD mode
support for dm365 (720p60, 1080i30) and appropriate register
modifications based on version numbers.
VPBE_VERSION_2 = dm365 specific
VPBE_VERSION_3 = dm355 specific
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add OSD block changes to enable dm365 and dm355 for vpbe driver.
Changes are based on version number of OSD, which have incremental
changes over 644x OSD hardware interms of few registers.
VPBE_VERSION_2 = dm365 specific
VPBE_VERSION_3 = dm355 specific
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch implements the core additions to the display driver,
mainly controlling the VENC and other encoders for dm365.
This patch also includes addition of amplifier subdevice to the
vpbe driver and interfacing with venc subdevice.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When using the SN9C20X_I420 fmt the sn9c20x needs more bandwidth
than our regular bandwidth calculations reserve.
This patch adds a sd_isoc_init function, which forces the use of a specific
altsetting when using the SN9C20X_I420 fmt.
This fixes the bottom 10-30% of the image getting corrupted when using
the SN9C20X_I420 fmt (which is the default fmt).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some cameras will pretty much entirely fill all the image buffers all the
time even though they are using compression.
This patch adds a flag to sd_desc, which drivers for such cameras can set.
When this flag is set the bandwidth calculation code will no longer
assume that the image buffer size is a worst case and less bandwidth than
imagebufsize * fps will be used on average.
This patch sets this new flag for 3 drivers:
* For spca561 (for rev12a cameras) and nw80x cams as these simply don't work
when given less bandwidth than imagebufsize * fps.
* For sn9c20x cameras, because these show severy jpeg artifacts when
given less bandwidth than imagebufsize * fps and since these are usb2
cameras there is plenty bandwidth anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Quoting from the official usb 20 spec:
"5.6.4 Isochronous Transfer Bus Access Constraints
Isochronous transfers can only be used by full-speed and high-speed devices."
This means that for code paths which are isoc mode only, we don't need to
check for the device being low speed, simplifying the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Check dev->actconfig rather than dev->config when checking various
configuration things. dev->config points to the array of configs for the
device so dev->config->foo boils down to dev->config[0].foo and the first
config is not necessarily always the active config.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In case we ever get sub drivers which do 7.5 fps and express this as
15 / 2 fps.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The calculated bandwidth should not be multiplied by the interval, but be
divided by it. Also bInterbval should be interpreted as a power of 2
for isochronous endpoints.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After the "gspca: Fix bulk mode cameras no longer working (regression fix)"
patch build_ep_tb is no longer being called for bulk endpoints.
This patch renames build_ep_tb to build_isoc_ep_tb to make clear it should
only be called for isoc mode cameras.
This patch also:
- drops the no longer needed xfer parameter
- removes a check for bulk mode from the build_isoc_ep_tb code
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Having:
- a mean image size of 0.375 time the max compressed image size and
- a frame rate of 30 fps for small images or with USB 2.0/3.0
seems more realistic and gives less image freezes.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This path add support to "OmniVision Technologies, Inc. VEHO Filmscanner".
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix detection of EMP202 audio chip. Some versions have an id of
0x83847650 instead of 0xffffffff
Honestech Vidbox NW03 has a EMP202 audio chip with a different Vendor ID.
Apparently, it is the same with the Gadmei ITV380:
http://linuxtv.org/wiki/index.php/Gadmei_USB_TVBox_UTV380
Signed-off-by: Gareth Williams <gareth@garethwilliams.me.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support for IT1935 9006 devices.
9006 have version 2 type chip.
9006 devices should use dvb-usb-it9135-02.fw firmware.
On the device tested the tuner id was set to 0 which meant
the driver used tuner id 0x38. The device functioned normally.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of creating two DVB frontend entries for the same device,
create just one entry, and fill the delivery_system according with
the supported standards.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
ops.info.frequency_stepsize is used only for DVB-T & friends. For
DVB-C, the step size is calculated using the symbol rate.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While this patch change some things, the updated fields there are
used just on printk, so it shouldn't cause any functional changes.
Yet, this routine is a little complex, so explain a little more
how it works.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of changing the ops.info.type struct, updates only
the data that will be returned to userspace.
Also add some debug messages to help tracking such issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
WARNING: "__udivdi3" [/home/v4l/new_build/v4l/cx25840.ko] undefined!
64 bits division need to call do_div & friends, in order to allow
it to compile with 32 bits kernels
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Making the detected video standard available to the core driver
and for user query.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adding support for the CX23888 DIF.
Changes regression tested against the HVR1700 and HVR1800.
Split out much of the set and init handling of the cx23885 based
cards into their own functions. Added the DIF initialization code
for each supported IF.
Updated the cx23885 code to correctly initialize cx23888 based
video/audio decoders.
Enabled Closed Caption support for CX23885 based cards during
initialization.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The card names are being truncated in the video4linux sys class name file.
Prior to this patch they were shown as:
cx23885[0] mpeg (Hauppauge WinT
cx23885[0] video (Hauppauge WinT
cx23885[0] vbi (Hauppauge WinT
After this patch they are shown as:
Hauppauge WinTV-HVR1850 (video)
Hauppauge WinTV-HVR1850 (mpeg)
Hauppauge WinTV-HVR1850 (vbi)
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added three new control calls (g_std, querystd and g_ctrl) to
the -417 driver. Also routed other controls through the main
cx23885 driver meaning that the controls for the 417 and the
raw video device all enter the driver code and are handled
in a single place.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
First in a series of patches that adds support to the cx23885 driver
for CX23888 analog video handling. Raw and MPEG video support is
being added for the HVR1850 driver in the patch, and the following
series of patches.
Some basic cx23885 driver cleanup. Partly to add HVR1850 support
and partly to allow -417.c V4L2 calls to be routed through thr
driver core and handled in a single place.
Make a number of core driver functions available to the -417.c
driver to streamline the driver.
Add the analog tuner ops definition so we can reach/tune the
hardware when we need to. Added the tff field so 888 based cards
(which have a weird field ordering issue) can be accomodated
and worked around in the driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now, ops->info.type is handled inside the dvb_frontend
core, only for DVBv3 calls, and according with the
delivery system. So, drivers should not care or use it,
otherwise, it may have issues with DVBv5 calls.
The drivers that were still using it were detected via
this small temporary hack:
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -29,13 +29,16 @@
#include <linux/types.h>
typedef enum fe_type {
+#if defined(__DVB_CORE__) || !defined (__KERNEL__)
FE_QPSK,
FE_QAM,
FE_OFDM,
FE_ATSC
+#else
+FE_FOOO
+#endif
} fe_type_t;
-
typedef enum fe_caps {
FE_IS_STUPID = 0,
FE_CAN_INVERSION_AUTO = 0x1,
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While the driver has support for both serial and parallel mode,
There's was way to select serial mode via configuration. Add
a config option for that, while keeping the default in serial mode.
Also, at debug mode, it will now print a message when mpeg is
enabled/disabled, and showing if parallel or serial mode were
selected, helping developers to double-check if the DRX-K is at
the right mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski
Hans de Goede
Theodore Kilgore
Mauro Carvalho Chehab
Manjunath Hadli
Jean-François Moine
Jose Alberto Reguero
Gareth Williams
Malcolm Priestley
Stefan Ringel
Steven Toth