Commit Graph

1561 Commits

Author SHA1 Message Date
Bjorn Helgaas a474aaedac rtc-cmos: move wake setup from ACPI glue into RTC driver
Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
in drivers/rtc/rtc-cmos.c.

This removes the ordering constraint between the module_init(acpi_rtc_init)
and the cmos_do_probe() code that depends on it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14 16:08:21 -07:00
Linus Torvalds fffdedef69 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net/mac80211/rx.c: fix build error
  acpi: Make ACPI_TOSHIBA depend on INPUT.
  net/bfin_mac.c MDIO namespace fixes
  jme: remove unused #include <version.h>
  netfilter: remove unused #include <version.h>
  net: Fix off-by-one in skb_dma_map
  smc911x: Add support for LAN921{5,7,8} chips from SMSC
  qlge: remove duplicated #include
  wireless: remove duplicated #include
  net/au1000_eth.c MDIO namespace fixes
  net/tc35815.c: fix compilation
  sky2: Fix WOL regression
  r8169: NULL pointer dereference on r8169 load
2008-10-13 10:08:08 -07:00
David S. Miller 4bb03849ae acpi: Make ACPI_TOSHIBA depend on INPUT.
Selecting INPUT_POLLDEV is not sufficient.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-12 21:22:31 -07:00
Linus Torvalds 1efd325fba Fix RTC wakealarm sysfs interface breakage.
Commit ed458df4d2 ("PnP: move
pnpacpi/pnpbios_init to after PCI init") moved the PnP RTC discovery
later, and now the ACPI RTC glue code doesn't find it any more, breaking
the RTC wakealarm sysfs interfaces, as reported by Rafael.

This really is fairly messy, and we have several annoying ordering
constraints here - the PnP code that sets up the RTC resources wants to
run after the PCI resources have to be registered, which in turn needs
to run after ACPI has at least enumerated the root PCI buses etc.  Our
initcall ordering is not fine-grained enough to make this all painless.

So this moves the ACPI RTC glue ("acpi_rtc_init()") down to a regular
module call, which fixes the problem Rafael has.  The reason this isn't
wonderful is that we really should do acpi_rtc_init before we do the
rtc_cmos init, and now those two are in the same module_init() section.

Which happens to work, but only because drivers/rtc is linked after
drivers/acpi.  In other words, we still have a very subtle ordering
issue here. Grr.

Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-12 11:30:08 -07:00
David S. Miller 4dd565134e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/e1000e/ich8lan.c
	drivers/net/e1000e/netdev.c
2008-10-08 14:56:41 -07:00
Rafael J. Wysocki 76acae04c8 ACPI: Make /proc/acpi/wakeup interface handle PCI devices (again)
Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits
of physical devices corresponding to the ACPI devices and make those bits
be set initially for devices that are enabled to wake up by default.  This
is needed to restore the 2.6.26 and earlier behavior for the PCI devices
that were previously handled correctly with the help of the
/proc/acpi/wakeup interface.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03 18:22:19 -07:00
David S. Miller 17dce5dfe3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	net/mac80211/mlme.c
2008-09-08 16:59:05 -07:00
philipl@overt.org c41a40c58b toshiba_acpi: Add support for bluetooth toggling through rfkill (v8)
There's been a patch floating around for toshiba_acpi that exports an ad-hoc
/proc interface to toggle the bluetooth adapter in a large number of Toshiba
laptops. I'm not sure if it's still relevant for the latest models, but it is
still required for older models such as my Tecra M3.

This change pulls in the low level Toshiba-specific code from the old patch and
sets up an rfkill device and a polled input device to track the state of the
hardware kill-switch.

Signed-off-by: Philip Langdale <philipl@overt.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05 16:17:45 -04:00
Andi Kleen 4fd23436f1 Merge branches 'smbus' and 'fujitsu-fix' into release-2.6.27 2008-09-04 14:33:03 +02:00
Zhao Yakui 266feefeb9 ACPI: Avoid bogus timeout about SMbus check
In the function of wait_transaction_complete when the timeout happens,
OS will try to check the status of SMbus again. If the status is what OS
expected, it will be regarded as the bogus timeout. Otherwise it will be
treated as ETIME.

http://bugzilla.kernel.org/show_bug.cgi?id=10483

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
tested-by    : Oldřich Jedlička < <oldium.pro@seznam.cz>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-09-04 14:32:28 +02:00
Andi Kleen f54538c3a0 Merge branch 'acpica-release-fixes' into release-2.6.27 2008-08-21 08:46:25 +02:00
Cyrill Gorcunov f0df2d6b52 acpi: add checking for NULL early param
The early_param handling function could recieve NULL pointer as argument
in case if user didn't enter parameter value.  So we have to be ready for
a such situation and do check for NULL pointer if needed.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-21 08:45:39 +02:00
Andi Kleen f3853863b0 Merge branch 'compal-fix' into release-2.6.27 2008-08-21 08:44:21 +02:00
Dennis Jansen 79c4375bf2 ACPI: Fix typo in "Disable MWAIT via DMI on broken Compal board"
This fixes a typo in commit 2a2a64714d
"Disable MWAIT via DMI on broken Compal board".

It allows the nomwait dmi check to actually detect the Acer 5220.

Signed-off-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-21 08:43:21 +02:00
Milan Broz 613e5f3376 ACPI: Fix now signed module parameter.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-18 08:38:36 +02:00
Ming Ling 1371c893ff ACPI: Change package length error to warning
The condition is harmless and no need to scare the user

http://bugzilla.kernel.org/show_bug.cgi?id=11245

Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-18 04:14:59 +02:00
Andi Kleen 0f24562364 Merge branches 'acpica-release-fixes', 'ec-fix', 'dock', 'irq-bounds', 'thermal-fix', 'wmi' and 'acpi-cleanups' into release-2.6.27 2008-08-15 03:30:00 +02:00
Milan Broz 9f497bcc69 ACPI: Fix thermal shutdowns
Do not use unsigned int if there is test for negative number...

See drivers/acpi/processor_perflib.c
  static unsigned int ignore_ppc = -1;
...
  if (event == CPUFREQ_START && ignore_ppc <= 0) {
       ignore_ppc = 0;
...

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 03:29:29 +02:00
Bjorn Helgaas fa46d35264 ACPI: bounds check IRQ to prevent memory corruption
acpi_penalize_isa_irq() should validate irq before using it to
index the acpi_irq_penalty[] table.

Here's the path I'm concerned about:

    pnpacpi_parse_allocated_irqresource()
    {
	...
	irq = acpi_register_gsi(gsi, triggering, polarity);
	if (irq >= 0)
		pcibios_penalize_isa_irq(irq, 1);

There's no guarantee that acpi_register_gsi() will return an IRQ
within the bounds of acpi_irq_penalty[].

I have not seen a failure I can attribute to this.  However,
ACPI_MAX_IRQS is only 256, and I'm pretty sure ia64 can have
IRQs larger than that.

I think this should go in 2.6.27.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 03:17:07 +02:00
Zhao Yakui 9d699ed92a ACPI: Avoid bogus EC timeout when EC is in Polling mode
When EC is in Polling mode, OS will check the EC status continually by using
the following source code:
       clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
       while (time_before(jiffies, delay)) {
               if (acpi_ec_check_status(ec, event))
       	            return 0;
               msleep(1);
       }
But msleep is realized by the function of schedule_timeout. At the same time
although one process is already waken up by some events, it won't be scheduled
immediately. So maybe there exists the following phenomena:
     a. The current jiffies is already after the predefined jiffies.
	But before timeout happens, OS has no chance to check the EC
	status again.
     b. If preemptible schedule is enabled, maybe preempt schedule will happen
	before checking loop. When the process is resumed again, maybe
	timeout already happens, which means that OS has no chance to check
	the EC status.

In such case maybe EC status is already what OS expects when timeout happens.
But OS has no chance to check the EC status and regards it as AE_TIME.

So it will be more appropriate that OS will try to check the EC status again
when timeout happens. If the EC status is what we expect, it won't be regarded
as timeout. Only when the EC status is not what we expect, it will be regarded
as timeout, which means that EC controller can't give a response in time.

http://bugzilla.kernel.org/show_bug.cgi?id=9823
http://bugzilla.kernel.org/show_bug.cgi?id=11141

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui  <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 03:13:06 +02:00
Zhao Yakui 2500822bf4 ACPI : Add the EC dmi table to fix the incorrect ECDT table
On some ASUS laptops the ECDT gives the incorrect command/status & Data I/O
register address.

AK: it seems like the command/data addresses are exchanged.

In such case it will cause that EC device can't be
initialized correctly.
To add the EC dmi table is to fix this issue. If the laptop falls into the
EC dmi table, the EC command/data I/O address will be fixed.

AK: Add comments describing this better

http://bugzilla.kernel.org/show_bug.cgi?id=9399

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
tested-by    : Jan Kasprzak  <kas@fi.muni.cz>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 03:12:27 +02:00
Holger Macht afd7301ddb ACPI: Properly clear flags on false-positives and send uevent on sudden unplug
Some devices emit a ACPI_NOTIFY_DEVICE_CHECK while physically unplugging
even if the software undock has already been done and dock_present() check
fails. However, the internal flags need to be cleared (complete_undock()).

Also, even notify userspace if the dock station suddently went away
without proper software undocking.

This happens on a Acer TravelMate 3000

Signed-off-by: Holger Macht <hmacht@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 03:02:42 +02:00
Pavel Machek d0057413a7 acpi: trivial cleanups
Trivial cleanups for ACPI. Fix misspelling in printk(), fix mismerge,
add file header.

AK: removed file header

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 02:29:06 +02:00
Carlos Corbacho dab36ad8d5 ACPI: WMI: Set instance for query block calls
Although the necessary data structure was set up, it was never actually
passed in, so data block calls have only been working by sheer chance.

(On Acer laptops. the data block methods we've been calling never look at
the instance value, hence acer-wmi never triggered this before).

f3454ae810 brought this to light.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 02:25:01 +02:00
Bob Moore 3c7db22a19 ACPICA: Additional error checking for pathname utilities
Add error check after all calls to acpi_ns_get_pathname_length.
Add status return from acpi_ns_build_external_path and check after
all calls.  Add parameter validation to acpi_ut_initialize_buffer.

Reported by and initial patch by Ingo Molnar.
http://lkml.org/lkml/2008/7/21/176

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 02:12:16 +02:00
Lin Ming d3ff268a01 ACPICA: Fix possible memory leak in Unload() operator
The DdbHandle returned by Load() does not have its reference count
decremented during unload, leading to a memory leak. Lin Ming.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 02:11:59 +02:00
Bob Moore 2843ae7734 ACPICA: Fix memory leak when deleting thermal/processor objects
Fixes a possible memory leak when thermal and processor objects
are deleted. Any associated notify handlers (and objects) were
not being deleted. Fiodor Suietov. BZ 506

http://www.acpica.org/bugzilla/show_bug.cgi?id=506

Signed-off-by: Fiodor Suietov <fiodor.f.suietov@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-15 02:11:59 +02:00
Niels de Vos 61a2d07d3f Remove newline from the description of module parameters
Some module parameters with only one line have the '\n' at the end of the
description.  This is not needed nor wanted as after the description the
type (i.e.  int) is followed by a newline.

Some modules contain a multi-line description, these are not affected
by this patch.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Ed L. Cashin <ecashin@coraid.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Roland Dreier <rolandd@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01 12:46:41 -07:00
Thomas Renninger 9b67c5d48f acpi cpufreq cleanup: move bailing out of function before locking the mutex
Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:43 -07:00
Thomas Renninger a1531acd43 cpufreq acpi: only call _PPC after cpufreq ACPI init funcs got called already
Ingo Molnar provided a fix to not call _PPC at processor driver
initialization time in "[PATCH] ACPI: fix cpufreq regression" (git
commit e4233dec74)

But it can still happen that _PPC is called at processor driver
initialization time.

This patch should make sure that this is not possible anymore.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:43 -07:00
Linus Torvalds 1d9b9f6a53 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  x86/PCI: use dev_printk when possible
  PCI: add D3 power state avoidance quirk
  PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
  PCI: add an option to allow ASPM enabled forcibly
  PCI: disable ASPM on pre-1.1 PCIe devices
  PCI: disable ASPM per ACPI FADT setting
  PCI MSI: Don't disable MSIs if the mask bit isn't supported
  PCI: handle 64-bit resources better on 32-bit machines
  PCI: rewrite PCI BAR reading code
  PCI: document pci_target_state
  PCI hotplug: fix typo in pcie hotplug output
  x86 gart: replace to_pages macro with iommu_num_pages
  x86, AMD IOMMU: replace to_pages macro with iommu_num_pages
  iommu: add iommu_num_pages helper function
  dma-coherent: add documentation to new interfaces
  Cris: convert to using generic dma-coherent mem allocator
  Sh: use generic per-device coherent dma allocator
  ARM: support generic per-device coherent dma mem
  Generic dma-coherent: fix DMA_MEMORY_EXCLUSIVE
  x86: use generic per-device dma coherent allocator
  ...
2008-07-28 18:14:24 -07:00
Matthew Wilcox 362b7077a5 PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
I get warnings about 'device' possibly being used uninitialised.  While
I can deduce this is not true, it seems that GCC can't.  This patch
changes `check_slot' to return device on success and -1 on error, which
shuts GCC up.

Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28 15:06:00 -07:00
Ingo Molnar 9e3ee1c39c Merge branch 'linus' into cpus4096
Conflicts:

	kernel/stop_machine.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 23:32:00 +02:00
Ingo Molnar 414f746d23 Merge branch 'linus' into cpus4096 2008-07-28 21:14:43 +02:00
Thomas Gleixner b032bf70df ACPI/CPUIDLE: prevent setting pm_idle to NULL
pm_idle_save resp. pm_idle_old can be NULL when the restore code in
acpi_processor_cst_has_changed() resp. cpuidle_uninstall_idle_handler()
is called. This can set pm_idle unconditinally to NULL, which causes the
kernel to panic when calling pm_idle in the x86 idle code. This was
covered by an extra check for !pm_idle in the x86 idle code, which was
removed during the x86 idle code refactoring.

Instead of restoring the pm_idle check in the x86 code prevent the
acpi/cpuidle code to set pm_idle to NULL.

Reported by: Dhaval Giani http://lkml.org/lkml/2008/7/2/309
Based on a debug patch from Ingo Molnar

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 08:31:58 -07:00
Linus Torvalds a048d3aff8 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: fix modular build
  ftrace: disable tracing on acpi idle calls
  ftrace: remove latency-tracer leftover
  ftrace: only trace preempt off with preempt tracer
  ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
2008-07-26 13:25:47 -07:00
Mike Travis 0bc3cc03fa cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
* Replace previous instances of the cpumask_of_cpu_ptr* macros
    with a the new (lvalue capable) generic cpumask_of_cpu().

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:40:33 +02:00
Steven Rostedt dcf3099745 ftrace: disable tracing on acpi idle calls
The acpi idle waits calls local_irq_save and then uses mwait to go into
idle. The tracer gets reenabled at local_irq_save but does not detect that
the idle allows for wake ups.

This patch adds code to disable the tracing when acpi puts the CPU to idle.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 14:42:21 +02:00
Linus Torvalds 1481b9109f Merge branch 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6
* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
  acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=y
  ACPI: thinkpad-acpi: don't misdetect in get_thinkpad_model_data() on -ENOMEM
  ACPI: thinkpad-acpi: bump up version to 0.21
  ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill support
  ACPI: thinkpad-acpi: WLSW overrides other rfkill switches
  ACPI: thinkpad-acpi: prepare for bluetooth and wwan rfkill support
  ACPI: thinkpad-acpi: consolidate wlsw notification function
  ACPI: thinkpad-acpi: minor refactor on radio switch init
  Revert "ACPI: don't walk tables if ACPI was disabled"
  Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled."
  Revert "Fix FADT parsing"
  ACPI : Set FAN device to correct state in boot phase
  ACPI: Ignore _BQC object when registering backlight device
  ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptors
2008-07-24 13:57:37 -07:00
Linus Torvalds 5042d99795 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fixup sparse endianness warnings in proc.c
  PCI PM: make more PCI PM core functionality available to drivers
  PCI/DMAR: don't assume presence of RMRRs
  PCI hotplug: fix error path in pci_slot's register_slot
2008-07-24 13:57:13 -07:00
Carlos Corbacho e41fb7c58e pm: acpi pm: add DMI quirk list for ACPI 1.0 suspend ordering
There are a few BIOSes that we know of already that need to use the ACPI 1.0
suspend order.  This appears to be only be a small minority of mostly nVidia
based systems.

Based on observation of Windows behaviour, it's clear that Windows is also
doing maintaining its own list of broken hardware that needs this workaround.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:24 -07:00
Shaohua Li bdfe6b7c68 pm: acpi hibernation: utilize hardware signature
ACPI defines a hardware signature.  BIOS calculates the signature according to
hardware configure and if hardware changes while hibernated, the signature
will change.  In that case, S4 resume should fail.

Still, there may be systems on which this mechanism does not work correctly,
so it is better to provide a workaround for them.  For this reason, add a new
switch to the acpi_sleep= command line argument allowing one to disable
hardware signature checking.

[shaohua.li@intel.com: build fix]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <Valdis.Kletnieks@vt.edu>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:24 -07:00
Akinobu Mita e108526e77 move memory_read_from_buffer() from fs.h to string.h
James Bottomley warns that inclusion of linux/fs.h in a low level
driver was always a danger signal.  This patch moves
memory_read_from_buffer() from fs.h to string.h and fixes includes in
existing memory_read_from_buffer() users.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00
Linus Torvalds 26dcce0fab Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23 18:37:44 -07:00
Alex Chiang e4268aad42 PCI hotplug: fix error path in pci_slot's register_slot
Juha Leppnen noticed that an error path in register_slot() wasn't
returning appropriately, leading to a condition where we might access a
kfree'ed pointer, so let's fix that.

Additionally, fix up the copyright information in the file while
we're in there.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-22 11:18:17 -07:00
Greg Kroah-Hartman fc3a8828b1 driver core: fix a lot of printk usages of bus_id
We have the dev_printk() variants for this kind of thing, use them
instead of directly trying to access the bus_id field of struct device.

This is done in order to remove bus_id entirely.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:53 -07:00
Ingo Molnar f88133d76e acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=y
-tip testing found the following boot crash on 32-bit x86 (Core2Duo
laptop) yesterday:

[    5.606664] scsi4 : ata_piix
[    5.606664] scsi5 : ata_piix
[    5.606664] ACPI Error (psargs-0358): [\_SB_.PCI0.LPC_.EC__.BSTA] Namespace lookup failure, AE_NOT_FOUND
[    5.606664] ACPI Error (psparse-0530): ACPI Error (nsnames-0186): Invalid NS Node (f7c0e960) while traversing path [20080609]
[    5.606664] BUG: unable to handle kernel NULL pointer dereference at 0000000f
[    5.606664] IP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80
[    5.609997] *pdpt = 0000000000a03001 *pde = 0000000000000000
[    5.609997] Oops: 0002 [#1] SMP
[    5.609997]
[    5.609997] Pid: 1, comm: swapper Not tainted (2.6.26-tip-03965-gbbfb62e-dirty #3153)
[    5.609997] EIP: 0060:[<80339e2f>] EFLAGS: 00010286 CPU: 0
[    5.609997] EIP is at acpi_ns_build_external_path+0x1f/0x80
[    5.609997] EAX: f7c18c18 EBX: ffffffff ECX: 00000010 EDX: 00000000
[    5.609997] ESI: f7c18c18 EDI: 00000010 EBP: f7c4dc28 ESP: f7c4dc18
[    5.609997]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    5.609997] Process swapper (pid: 1, ti=f7c4c000 task=f7c50000 task.ti=f7c4c000)
[    5.609997] Stack: 00000000 00000000 f7c18c18 f7c4dc48 f7c4dc40 80339ed0 00000000 f7c18c18
[    5.609997]        8084c1b6 8084c1b6 f7c4dc58 8033a60a 00000000 00000010 00000000 f7c18c18
[    5.609997]        f7c4dc70 8033a68f f7c18c18 00000000 f6de7600 00000005 f7c4dc98 8033c34d
[    5.609997] Call Trace:
[    5.609997]  [<80339ed0>] ? acpi_ns_handle_to_pathname+0x40/0x72
[    5.609997]  [<8033a60a>] ? acpi_ns_print_node_pathname+0x2c/0x61
[    5.609997]  [<8033a68f>] ? acpi_ns_report_method_error+0x50/0x6d
[    5.609997]  [<8033c34d>] ? acpi_ps_parse_aml+0x149/0x2f9
[    5.609997]  [<8033d6dd>] ? acpi_ps_execute_method+0x132/0x201
[    5.609997]  [<80339d19>] ? acpi_ns_evaluate+0x1ad/0x258
[    5.609997]  [<803406c4>] ? acpi_ut_evaluate_object+0x55/0x18f
[    5.609997]  [<803408b7>] ? acpi_ut_execute_STA+0x22/0x7a
[    5.609997]  [<8033a907>] ? acpi_get_object_info+0x131/0x1be
[    5.609997]  [<80344bb2>] ? do_acpi_find_child+0x22/0x4b
[    5.609997]  [<8033b855>] ? acpi_ns_walk_namespace+0xa5/0x124
[    5.609997]  [<803394f3>] ? acpi_walk_namespace+0x54/0x74
[    5.609997]  [<80344b90>] ? do_acpi_find_child+0x0/0x4b
[    5.609997]  [<80344b85>] ? acpi_get_child+0x38/0x43
[    5.609997]  [<80344b90>] ? do_acpi_find_child+0x0/0x4b
[    5.609997]  [<804d0148>] ? ata_acpi_associate+0xb5/0x1b5
[    5.609997]  [<804c6ecb>] ? ata_scsi_add_hosts+0x8e/0xdc
[    5.609997]  [<804c40c8>] ? ata_host_register+0x9f/0x1d6
[    5.609997]  [<804cbc7f>] ? ata_pci_sff_activate_host+0x179/0x19f
[    5.609997]  [<804cdd45>] ? ata_sff_interrupt+0x0/0x1c7
[    5.609997]  [<8069b033>] ? piix_init_one+0x569/0x5b0
[    5.609997]  [<801bd400>] ? sysfs_ilookup_test+0x0/0x11
[    5.609997]  [<801987d7>] ? ilookup5_nowait+0x29/0x30
[    5.609997]  [<802efc7e>] ? pci_match_device+0x99/0xa3
[    5.609997]  [<802efd3c>] ? pci_device_probe+0x39/0x59
[    5.609997]  [<803bc4af>] ? driver_probe_device+0xa0/0x11b
[    5.609997]  [<803bc564>] ? __driver_attach+0x3a/0x59
[    5.609997]  [<803bbde3>] ? bus_for_each_dev+0x36/0x58
[    5.609997]  [<803bc354>] ? driver_attach+0x14/0x16
[    5.609997]  [<803bc52a>] ? __driver_attach+0x0/0x59
[    5.609997]  [<803bc161>] ? bus_add_driver+0x93/0x196
[    5.609997]  [<803bc773>] ? driver_register+0x71/0xcd
[    5.609997]  [<802eff05>] ? __pci_register_driver+0x3f/0x6e
[    5.609997]  [<809af7ff>] ? piix_init+0x14/0x24
[    5.609997]  [<80984568>] ? kernel_init+0x128/0x269
[    5.609997]  [<809af7eb>] ? piix_init+0x0/0x24
[    5.609997]  [<802e2758>] ? trace_hardirqs_on_thunk+0xc/0x10
[    5.609997]  [<80116aef>] ? restore_nocheck_notrace+0x0/0xe
[    5.609997]  [<80984440>] ? kernel_init+0x0/0x269
[    5.609997]  [<80984440>] ? kernel_init+0x0/0x269
[    5.609997]  [<80117d87>] ? kernel_thread_helper+0x7/0x10
[    5.609997]  =======================
[    5.609997] Code: 75 02 b3 01 8d 43 01 8b 5d fc c9 c3 55 89 e5 57 89 cf 56 53 89 d3 4b 83 ec 04 83 fb 03 89 55 f0 77 09 c6 01 5c c6 41 01 00 eb 59 <c6> 04 19 00 8b 55 f0 8d 34 11 89 c2 eb 19 8b 42 08 83 eb 05 89
[    5.609997] EIP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80 SS:ESP 0068:f7c4dc18
[    5.613331] Kernel panic - not syncing: Fatal exception
[    5.613331] Rebooting in 1 seconds..[    4.646664] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

I have bisected it down to:

 # bad:  [5b664cbe] Merge branch 'upstream-linus' of git://git.kernel.
 # good: [bce7f795] Linux 2.6.26
 # good: [e18425ab] Merge branch 'tracing/for-linus' of git://git.kern
 # good: [cadc7236] Merge branch 'bkl-removal' into next
 # good: [4515889a] Merge branch 'merge' of git://git.kernel.org/pub/s
 # good: [42fdd14e] Merge git://git.kernel.org/pub/scm/linux/kernel/gi
 # good: [8a0ca91f] Merge branch 'for-linus' of git://git.kernel.org/p
 # bad:  [0af4b8cb] ACPI: Introduce new device wakeup flag 'prepared'
 # good: [fe997407] PCI: construct one fakephp slot per PCI slot
 # bad:  [531f254a] PCIE: aer: use dev_printk when possible
 # bad:  [15650a20] x86/PCI: fixup early quirk probing
 # good: [0e6859d9] ACPI PM: Remove obsolete Toshiba workaround
 # bad:  [8344b566] PCI: ACPI PCI slot detection driver
 # good: [f46753c9] PCI: introduce pci_slot

 | 8344b568f5 is first bad commit
 | commit 8344b568f5
 | Author: Alex Chiang <achiang@hp.com>
 | Date:   Tue Jun 10 15:30:42 2008 -0600
 |
 |     PCI: ACPI PCI slot detection driver
 |
 |     Detect all physical PCI slots as described by ACPI, and create entries in
 |     /sys/bus/pci/slots/.

I.e. the new CONFIG_ACPI_PCI_SLOT=y option was causing this crash.

But the bug is not mainly in this new PCI code - that code was just
hitting the ACPI code in a new way which made ACPI break.

The crash signature shows that we are crashing on this instruction:

   movb $0x0, (%ecx, %ebx, 1)

ECX and EBX are 0x10 and -1. It's this line in
drivers/acpi/namespace/nsnames.c's acpi_ns_build_external_path():

        name_buffer[index] = 0;

I.e. name_buffer is 0x10 and index is -1.

index -1 corresponds to size 0, and name_buffer 0x10 is slab's
ZERO_SIZE_PTR special-case for zero-sized allocations.

I.e. when we called acpi_ns_handle_to_pathname(), we got required_size
of 0 due to an error condition, but this is passed to the ACPI allocator
unconditionally:

        required_size = acpi_ns_get_pathname_length(node);

        /* Validate/Allocate/Clear caller buffer */

        status = acpi_ut_initialize_buffer(buffer, required_size);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

Where acpi_ut_initialize_buffer(), through many (unnecessary) layers,
ends up calling kzalloc(0). Which returns 0x10 and that then causes the
crash later on.

So fix both callers of acpi_ns_get_pathname_length(), which can return 0
in case of an invalid node.

Also add a WARN_ON() against zero sized allocations in
acpi_ut_initialize_buffer() to make it easier to find similar instances
of this bug.

I have tested this patch for the past 24 hours and the crash has not
reappeared.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-22 00:27:48 +02:00
Ingo Molnar eb6a12c242 Merge branch 'linus' into cpus4096-for-linus
Conflicts:

	net/sunrpc/svc.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21 17:19:50 +02:00
Thomas Gleixner 5e248ac9a5 APCI: revert another duplicated patch
commit d185705690 ("ACPI: don't walk
tables if ACPI was disabled") is another superfluous duplicate commit
caused by git -> quilt -> git conversion.

Revert it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:14:57 -07:00
Thomas Gleixner 392798a17b APCI: revert duplicated patch
commit 816c2eda3c ("dock: bay: Don't call
acpi_walk_namespace() when ACPI is disabled.") was merged between
2.6.26-rc8 and -rc9)

Due to rebasing the ACPI tree via quilt the same patch got applied again
via commit cc7e51666d ("dock: bay: Don't
call acpi_walk_namespace() when ACPI is disabled.")

Revert it, as it is obviously bogus.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:14:57 -07:00