Commit Graph

502 Commits

Author SHA1 Message Date
Michal Hocko c32b3cbe0d oom, PM: make OOM detection in the freezer path raceless
Commit 5695be142e ("OOM, PM: OOM killed task shouldn't escape PM
suspend") has left a race window when OOM killer manages to
note_oom_kill after freeze_processes checks the counter.  The race
window is quite small and really unlikely and partial solution deemed
sufficient at the time of submission.

Tejun wasn't happy about this partial solution though and insisted on a
full solution.  That requires the full OOM and freezer's task freezing
exclusion, though.  This is done by this patch which introduces oom_sem
RW lock and turns oom_killer_disable() into a full OOM barrier.

oom_killer_disabled check is moved from the allocation path to the OOM
level and we take oom_sem for reading for both the check and the whole
OOM invocation.

oom_killer_disable() takes oom_sem for writing so it waits for all
currently running OOM killer invocations.  Then it disable all the further
OOMs by setting oom_killer_disabled and checks for any oom victims.
Victims are counted via mark_tsk_oom_victim resp.  unmark_oom_victim.  The
last victim wakes up all waiters enqueued by oom_killer_disable().
Therefore this function acts as the full OOM barrier.

The page fault path is covered now as well although it was assumed to be
safe before.  As per Tejun, "We used to have freezing points deep in file
system code which may be reacheable from page fault." so it would be
better and more robust to not rely on freezing points here.  Same applies
to the memcg OOM killer.

out_of_memory tells the caller whether the OOM was allowed to trigger and
the callers are supposed to handle the situation.  The page allocation
path simply fails the allocation same as before.  The page fault path will
retry the fault (more on that later) and Sysrq OOM trigger will simply
complain to the log.

Normally there wouldn't be any unfrozen user tasks after
try_to_freeze_tasks so the function will not block. But if there was an
OOM killer racing with try_to_freeze_tasks and the OOM victim didn't
finish yet then we have to wait for it. This should complete in a finite
time, though, because

	- the victim cannot loop in the page fault handler (it would die
	  on the way out from the exception)
	- it cannot loop in the page allocator because all the further
	  allocation would fail and __GFP_NOFAIL allocations are not
	  acceptable at this stage
	- it shouldn't be blocked on any locks held by frozen tasks
	  (try_to_freeze expects lockless context) and kernel threads and
	  work queues are not frozen yet

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:03 -08:00
Michal Hocko 49550b6055 oom: add helpers for setting and clearing TIF_MEMDIE
This patchset addresses a race which was described in the changelog for
5695be142e ("OOM, PM: OOM killed task shouldn't escape PM suspend"):

: PM freezer relies on having all tasks frozen by the time devices are
: getting frozen so that no task will touch them while they are getting
: frozen.  But OOM killer is allowed to kill an already frozen task in order
: to handle OOM situtation.  In order to protect from late wake ups OOM
: killer is disabled after all tasks are frozen.  This, however, still keeps
: a window open when a killed task didn't manage to die by the time
: freeze_processes finishes.

The original patch hasn't closed the race window completely because that
would require a more complex solution as it can be seen by this patchset.

The primary motivation was to close the race condition between OOM killer
and PM freezer _completely_.  As Tejun pointed out, even though the race
condition is unlikely the harder it would be to debug weird bugs deep in
the PM freezer when the debugging options are reduced considerably.  I can
only speculate what might happen when a task is still runnable
unexpectedly.

On a plus side and as a side effect the oom enable/disable has a better
(full barrier) semantic without polluting hot paths.

I have tested the series in KVM with 100M RAM:
- many small tasks (20M anon mmap) which are triggering OOM continually
- s2ram which resumes automatically is triggered in a loop
	echo processors > /sys/power/pm_test
	while true
	do
		echo mem > /sys/power/state
		sleep 1s
	done
- simple module which allocates and frees 20M in 8K chunks. If it sees
  freezing(current) then it tries another round of allocation before calling
  try_to_freeze
- debugging messages of PM stages and OOM killer enable/disable/fail added
  and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before
  it wakes up waiters.
- rebased on top of the current mmotm which means some necessary updates
  in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but
  I think this should be OK because __thaw_task shouldn't interfere with any
  locking down wake_up_process. Oleg?

As expected there are no OOM killed tasks after oom is disabled and
allocations requested by the kernel thread are failing after all the tasks
are frozen and OOM disabled.  I wasn't able to catch a race where
oom_killer_disable would really have to wait but I kinda expected the race
is really unlikely.

[  242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB
[  243.628071] Unmarking 2992 OOM victim. oom_victims: 1
[  243.636072] (elapsed 2.837 seconds) done.
[  243.641985] Trying to disable OOM killer
[  243.643032] Waiting for concurent OOM victims
[  243.644342] OOM killer disabled
[  243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[  243.652983] Suspending console(s) (use no_console_suspend to debug)
[  243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010
[...]
[  243.992600] PM: suspend of devices complete after 336.667 msecs
[  243.993264] PM: late suspend of devices complete after 0.660 msecs
[  243.994713] PM: noirq suspend of devices complete after 1.446 msecs
[  243.994717] ACPI: Preparing to enter system sleep state S3
[  243.994795] PM: Saving platform NVS memory
[  243.994796] Disabling non-boot CPUs ...

The first 2 patches are simple cleanups for OOM.  They should go in
regardless the rest IMO.

Patches 3 and 4 are trivial printk -> pr_info conversion and they should
go in ditto.

The main patch is the last one and I would appreciate acks from Tejun and
Rafael.  I think the OOM part should be OK (except for __thaw_task vs.
task_lock where a look from Oleg would appreciated) but I am not so sure I
haven't screwed anything in the freezer code.  I have found several
surprises there.

This patch (of 5):

This patch is just a preparatory and it doesn't introduce any functional
change.

Note:
I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to
wait for the oom victim and to prevent from new killing. This is
just a side effect of the flag. The primary meaning is to give the oom
victim access to the memory reserves and that shouldn't be necessary
here.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:03 -08:00
Oleg Nesterov 3245d6acab exit: fix race between wait_consider_task() and wait_task_zombie()
wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and
both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE
change in between, gcc needs to reload p->exit_state after
security_task_wait().  In this case ->notask_error will be wrongly
cleared and do_wait() can hang forever if it was the last eligible
child.

Many thanks to Arne who carefully investigated the problem.

Note: this bug is very old but it was pure theoretical until commit
b3ab03160d ("wait: completely ignore the EXIT_DEAD tasks").  Before
this commit "-O2" was probably enough to guarantee that compiler won't
read ->exit_state twice.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Arne Goedeke <el@laramies.com>
Tested-by: Arne Goedeke <el@laramies.com>
Cc: <stable@vger.kernel.org>	[3.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 15:10:51 -08:00
Linus Torvalds 37da7bbbe8 TTY/Serial driver patches for 3.19-rc1
Here's the big tty/serial driver update for 3.19-rc1.
 
 There are a number of TTY core changes/fixes in here from Peter Hurley
 that have all been teted in linux-next for a long time now.  There are
 also the normal serial driver updates as well, full details in the
 changelog below.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD/MACgkQMUfUDdst+ymW+wCfbSzoYMRObIImMPWfoQtxkvvN
 rpkAnAtyEP/zZIfkQIuKTSH6FJxocF8V
 =WZt3
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver update for 3.19-rc1.

  There are a number of TTY core changes/fixes in here from Peter Hurley
  that have all been teted in linux-next for a long time now.  There are
  also the normal serial driver updates as well, full details in the
  changelog below"

* tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits)
  serial: pxa: hold port.lock when reporting modem line changes
  tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
  tty: Deletion of unnecessary checks before two function calls
  n_tty: Fix read_buf race condition, increment read_head after pushing data
  serial: of-serial: add PM suspend/resume support
  Revert "serial: of-serial: add PM suspend/resume support"
  Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
  serial: 8250: don't attempt a trylock if in sysrq
  serial: core: Add big-endian iotype
  serial: samsung: use port->fifosize instead of hardcoded values
  serial: samsung: prefer to use fifosize from driver data
  serial: samsung: fix style problems
  serial: samsung: wait for transfer completion before clock disable
  serial: icom: fix error return code
  serial: tegra: clean up tty-flag assignments
  serial: Fix io address assign flow with Fintek PCI-to-UART Product
  serial: mxs-auart: fix tx_empty against shift register
  serial: mxs-auart: fix gpio change detection on interrupt
  serial: mxs-auart: Fix mxs_auart_set_ldisc()
  serial: 8250_dw: Use 64-bit access for OCTEON.
  ...
2014-12-14 15:23:32 -08:00
Oleg Nesterov 6c66e7dba3 exit: exit_notify: re-use "dead" list to autoreap current
After the previous change we can add just the exiting EXIT_DEAD task to
the "dead" list and remove another release_task(tsk).

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:18 -08:00
Oleg Nesterov 482a3767e5 exit: reparent: call forget_original_parent() under tasklist_lock
Shift "release dead children" loop from forget_original_parent() to its
caller, exit_notify().  It is safe to reap them even if our parent reaps
us right after we drop tasklist_lock, those children no longer have any
connection to the exiting task.

And this allows us to avoid write_lock_irq(tasklist_lock) right after it
was released by forget_original_parent(), we can simply call it with
tasklist_lock held.

While at it, move the comment about forget_original_parent() up to
this function.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:18 -08:00
Oleg Nesterov ad9e206aef exit: reparent: avoid find_new_reaper() if no children
Now that pid_ns logic was isolated we can change forget_original_parent()
to return right after find_child_reaper() when father->children is empty,
there is nothing to reparent in this case.

In particular this avoids find_alive_thread() and this can help if the
whole process exits and it has a lot of PF_EXITING threads at the start of
the thread list, this can easily lead to O(nr_threads ** 2) iterations.

Trivial test case (tested under KVM, 2 CPUs):

    static void *tfunc(void *arg)
    {
        pause();
        return NULL;
    }

    static int child(unsigned int nt)
    {
        pthread_t pt;

        while (nt--)
            assert(pthread_create(&pt, NULL, tfunc, NULL) == 0);

        pthread_kill(pt, SIGTRAP);
        pause();
        return 0;
    }

    int main(int argc, const char *argv[])
    {
        int stat;
        unsigned int nf = atoi(argv[1]);
        unsigned int nt = atoi(argv[2]);

        while (nf--) {
            if (!fork())
                return child(nt);

            wait(&stat);
            assert(stat == SIGTRAP);
        }

        return 0;
    }

$ time ./test 16 16536 shows:

              real        user         sys
    -    5m37.628s    0m4.437s    8m5.560s
    +    0m50.032s    0m7.130s    1m4.927s

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:18 -08:00
Oleg Nesterov c9dc05bfdb exit: reparent: introduce find_alive_thread()
Add the new simple helper to factor out the for_each_thread() code in
find_child_reaper() and find_new_reaper().  It can also simplify the
potential PF_EXITING -> exit_state change, plus perhaps we can change this
code to take SIGNAL_GROUP_EXIT into account.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 1109909c7d exit: reparent: introduce find_child_reaper()
find_new_reaper() does 2 completely different things.  Not only it finds a
reaper, it also updates pid_ns->child_reaper or kills the whole namespace
if the caller is ->child_reaper.

Now that has_child_subreaper logic doesn't depend on child_reaper check we
can move that pid_ns code into a separate helper.  IMHO this makes the
code more clean, and this allows the next changes.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 175aed3f8d exit: reparent: document the ->has_child_subreaper checks
Swap the "init_task" and same_thread_group() checks.  This way it is more
simple to document these checks and we can remove the link to the previous
discussion on lkml.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 3750ef979c exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper()
Change find_new_reaper() to use for_each_thread() instead of deprecated
while_each_thread().  We do not bother to check "thread != father" in the
1st loop, we can rely on PF_EXITING check.

Note: this means the minor behavioural change: for_each_thread() starts
from the group leader.  But this should be fine, nobody should make any
assumption about do_wait(__WNOTHREAD) when it comes to reparented tasks.
And this can avoid the pointless reparenting to a short-living thread
While zombie leaders are not that common.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 7d24e2df52 exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting
find_new_reaper() assumes that "has_child_subreaper" logic is safe as
long as we are not the exiting ->child_reaper and this is doubly wrong:

1. In fact it is safe if "pid_ns->child_reaper == father"; there must
   be no children after zap_pid_ns_processes() returns, so it doesn't
   matter what we return in this case and even pid_ns->child_reaper is
   wrong otherwise: we can't reparent to ->child_reaper == current.

   This is not a bug, but this is confusing.

2. It is not safe if we are not pid_ns->child_reaper but from the same
   thread group. We drop tasklist_lock before zap_pid_ns_processes(),
   so another thread can lock it and choose the new reaper from the
   upper namespace if has_child_subreaper == T, and this is obviously
   wrong.

   This is not that bad, zap_pid_ns_processes() won't return until the
   the new reaper reaps all zombies, but this should be fixed anyway.

We could change for_each_thread() loop to use ->exit_state instead of
PF_EXITING which we had to use until 8aac62706a, or we could change
copy_signal() to check CLONE_NEWPID before setting has_child_subreaper,
but lets change this code so that it is clear we can't look outside of
our namespace, otherwise same_thread_group(reaper, child_reaper) check
will look wrong and confusing anyway.

We can simply start from "father" and fix the problem. We can't wrongly
return a thread from the same thread group if ->is_child_subreaper == T,
we know that all threads have PF_EXITING set.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 8a1296aea4 exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting
The ->has_child_subreaper code in find_new_reaper() finds alive "thread"
but returns another "reaper" thread which can be dead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 26e75b5c3d exit: release_task: fix the comment about group leader accounting
Contrary to what the comment in __exit_signal() says we do account the
group leader. Fix this and explain why.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 986094dfe1 exit: wait: drop tasklist_lock before psig->c* accounting
wait_task_zombie() no longer needs tasklist_lock to accumulate the
psig->c* counters, we can drop it right after cmpxchg(exit_state).

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov f953ccd006 exit: wait: don't use zombie->real_parent
1. wait_task_zombie() uses p->real_parent to get psig/siglock. This is
   correct but needs tasklist_lock, ->real_parent can exit.

   We can use "current" instead. This is our natural child, its parent
   must be our sub-thread.

2. Read psig/sig outside of ->siglock, ->signal is no longer protected
   by this lock.

3. Fix the outdated comments about tasklist_lock. We can not race with
   __exit_signal(), the whole thread group is dead, nobody but us can
   call it.

   Also clarify the usage of ->stats_lock and ->siglock.

Note: thread_group_cputime_adjusted() is sub-optimal in this case, we
probably want to export cputime_adjust() to avoid thread_group_cputime().
The comment says "all threads" but there are no other threads.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov f6507f83bc exit: wait: cleanup the ptrace_reparented() checks
Now that EXIT_DEAD is the terminal state we can kill "int traced"
variable and check "state == EXIT_DEAD" instead to cleanup the code.  In
particular, this way it is clear that the check obviously doesn't need
tasklist_lock.

Also fix the type of "unsigned long state", "long" was always wrong
although this doesn't matter because cmpxchg/xchg uses typeof(*ptr).

[akpm@linux-foundation.org: don't make me google the C Operator Precedence table]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:17 -08:00
Oleg Nesterov 7c8bd2322c exit: ptrace: shift "reap dead" code from exit_ptrace() to forget_original_parent()
Now that forget_original_parent() uses ->ptrace_entry for EXIT_DEAD tasks,
we can simply pass "dead_children" list to exit_ptrace() and remove
another release_task() loop.  Plus this way we do not need to drop and
reacquire tasklist_lock.

Also shift the list_empty(ptraced) check, if we want this optimization it
makes sense to eliminate the function call altogether.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Cc: Sterling Alexander <stalexan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:10 -08:00
Oleg Nesterov 2831096e21 exit: reparent: cleanup the usage of reparent_leader()
1. Now that reparent_leader() doesn't abuse ->sibling we can shift
   list_move_tail() from reparent_leader() to forget_original_parent()
   and turn it into a single list_splice_tail_init(). This also makes
   BUG_ON(!list_empty()) and list_for_each_entry_safe() unnecessary.

2. This also allows to shift the same_thread_group() check, it looks
   a bit more clear in the caller.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Cc: Sterling Alexander <stalexan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:10 -08:00
Oleg Nesterov 57a059187d exit: reparent: cleanup the changing of ->parent
1. Cosmetic, but "if (t->parent == father)" looks a bit confusing.
   We need to change t->parent if and only if t is not traced.

2. If we actually want this BUG_ON() to ensure that parent/ptrace
   match each other, then we should also take ptrace_reparented()
   case into account too.

3. Change this code to use for_each_thread() instead of deprecated
   while_each_thread().

[dan.carpenter@oracle.com: silence a bogus static checker warning]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Cc: Sterling Alexander <stalexan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:10 -08:00
Oleg Nesterov dc2fd4b009 exit: reparent: use ->ptrace_entry rather than ->sibling for EXIT_DEAD tasks
reparent_leader() reuses ->sibling as a list node to add an EXIT_DEAD task
into dead_children list we are going to release.  This obviously removes
the dead task from its real_parent->children list and this is even good;
the parent can do nothing with the EXIT_DEAD reparented zombie, it only
makes do_wait() slower.

But, this also means that it can not be reparented once again, so if its
new parent dies too nobody will update ->parent/real_parent, they can
point to the freed memory even before release_task() we are going to call,
this breaks the code which relies on pid_alive() to access
->real_parent/parent.

Fortunately this is mostly theoretical, this can only happen if init or
PR_SET_CHILD_SUBREAPER process ignores SIGCHLD and the new parent
sub-thread exits right after we drop tasklist_lock.

Change this code to use ->ptrace_entry instead, we know that the child is
not traced so nobody can ever use this member.  This also allows to unify
this logic with exit_ptrace(), see the next changes.

Note: we really need to change release_task() to nullify real_parent/
parent/group_leader pointers, but we need to change the current users
first somehow.  And it would be better to reap this zombie immediately but
release_task_locked() we need is complicated by proc_flush_task().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Cc: Sterling Alexander <stalexan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:10 -08:00
Peter Hurley e1c2296c34 tty: Move session_of_pgrp() and make static
tiocspgrp() is the lone caller of session_of_pgrp(); relocate and
limit to file scope.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:26:14 -08:00
Peter Zijlstra 1029a2b52c sched, exit: Deal with nested sleeps
do_wait() is a big wait loop, but we set TASK_RUNNING too late; we end
up calling potential sleeps before we reset it.

Not strictly a bug since we're guaranteed to exit the loop and not
call schedule(); put in annotations to quiet might_sleep().

 WARNING: CPU: 0 PID: 1 at ../kernel/sched/core.c:7123 __might_sleep+0x7e/0x90()
 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8109a788>] do_wait+0x88/0x270

 Call Trace:
  [<ffffffff81694991>] dump_stack+0x4e/0x7a
  [<ffffffff8109877c>] warn_slowpath_common+0x8c/0xc0
  [<ffffffff8109886c>] warn_slowpath_fmt+0x4c/0x50
  [<ffffffff810bca6e>] __might_sleep+0x7e/0x90
  [<ffffffff811a1c15>] might_fault+0x55/0xb0
  [<ffffffff8109a3fb>] wait_consider_task+0x90b/0xc10
  [<ffffffff8109a804>] do_wait+0x104/0x270
  [<ffffffff8109b837>] SyS_wait4+0x77/0x100
  [<ffffffff8169d692>] system_call_fastpath+0x16/0x1b

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: umgwanakikbuti@gmail.com
Cc: ilya.dryomov@inktank.com
Cc: Alex Elder <alex.elder@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Axel Lin <axel.lin@ingics.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Guillaume Morin <guillaume@morinfr.org>
Cc: Ionut Alexa <ionut.m.alexa@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140924082242.186408915@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28 10:55:30 +01:00
Linus Torvalds faafcba3b5 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...
2014-10-13 16:23:15 +02:00
Rik van Riel e78c349679 time, signal: Protect resource use statistics with seqlock
Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability
issues on large systems, due to both functions being serialized with a
lock.

The lock protects against reporting a wrong value, due to a thread in the
task group exiting, its statistics reporting up to the signal struct, and
that exited task's statistics being counted twice (or not at all).

Protecting that with a lock results in times() and clock_gettime() being
completely serialized on large systems.

This can be fixed by using a seqlock around the events that gather and
propagate statistics. As an additional benefit, the protection code can
be moved into thread_group_cputime(), slightly simplifying the calling
functions.

In the case of posix_cpu_clock_get_task() things can be simplified a
lot, because the calling function already ensures that the task sticks
around, and the rest is now taken care of in thread_group_cputime().

This way the statistics reporting code can run lockless.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daeseok Youn <daeseok.youn@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guillaume Morin <guillaume@morinfr.org>
Cc: Ionut Alexa <ionut.m.alexa@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: umgwanakikbuti@gmail.com
Cc: fweisbec@gmail.com
Cc: srao@redhat.com
Cc: lwoodman@redhat.com
Cc: atheurer@redhat.com
Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-08 08:17:01 +02:00
Rik van Riel 90ed9cbe76 exit: Always reap resource stats in __exit_signal()
Oleg pointed out that wait_task_zombie adds a task's usage statistics
to the parent's signal struct, but the task's own signal struct should
also propagate the statistics at exit time.

This allows thread_group_cputime(reaped_zombie) to get the statistics
after __unhash_process() has made the task invisible to for_each_thread,
but before the thread has actually been rcu freed, making sure no
non-monotonic results are returned inside that window.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Guillaume Morin <guillaume@morinfr.org>
Cc: Ionut Alexa <ionut.m.alexa@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: umgwanakikbuti@gmail.com
Cc: fweisbec@gmail.com
Cc: srao@redhat.com
Cc: lwoodman@redhat.com
Cc: atheurer@redhat.com
Link: http://lkml.kernel.org/r/1408133138-22048-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-08 08:17:00 +02:00
Paul E. McKenney 3f95aa81d2 rcu: Make TASKS_RCU handle tasks that are almost done exiting
Once a task has passed exit_notify() in the do_exit() code path, it
is no longer on the task lists, and is therefore no longer visible
to rcu_tasks_kthread().  This means that an almost-exited task might
be preempted while within a trampoline, and this task won't be waited
on by rcu_tasks_kthread().  This commit fixes this bug by adding an
srcu_struct.  An exiting task does srcu_read_lock() just before calling
exit_notify(), and does the corresponding srcu_read_unlock() after
doing the final preempt_disable().  This means that rcu_tasks_kthread()
can do synchronize_srcu() to wait for all mostly-exited tasks to reach
their final preempt_disable() region, and then use synchronize_sched()
to wait for those tasks to finish exiting.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:27:22 -07:00
Ionut Alexa a0be55dee7 kernel/exit.c: fix coding style warnings and errors
Fixed coding style warnings and errors.

Signed-off-by: Ionut Alexa <ionut.m.alexa@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:22 -07:00
David Rientjes fb794bcbb4 mm, oom: remove unnecessary exit_state check
The oom killer scans each process and determines whether it is eligible
for oom kill or whether the oom killer should abort because of
concurrent memory freeing.  It will abort when an eligible process is
found to have TIF_MEMDIE set, meaning it has already been oom killed and
we're waiting for it to exit.

Processes with task->mm == NULL should not be considered because they
are either kthreads or have already detached their memory and killing
them would not lead to memory freeing.  That memory is only freed after
exit_mm() has returned, however, and not when task->mm is first set to
NULL.

Clear TIF_MEMDIE after exit_mm()'s mmput() so that an oom killed process
is no longer considered for oom kill, but only until exit_mm() has
returned.  This was fragile in the past because it relied on
exit_notify() to be reached before no longer considering TIF_MEMDIE
processes.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:21 -07:00
Oleg Nesterov 0341729b4b signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch]
Move the declaration/definition of allow_signal/disallow_signal to
signal.h/signal.c.  The new place is more logical and allows to use the
static helpers in signal.c (see the next changes).

While at it, make them return void and remove the valid_signal() check.
Nobody checks the returned value, and in-kernel users must not pass the
wrong signal number.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:11 -07:00
Oleg Nesterov 39af1765f1 memcg: optimize the "Search everything else" loop in mm_update_next_owner()
for_each_process_thread() is sub-optimal. All threads share the same
->mm, we can swicth to the next process once we found a thread with
->mm != NULL and ->mm != mm.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Peter Chiang <pchiang@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:03 -07:00
Oleg Nesterov f87fb599ae memcg: mm_update_next_owner() should skip kthreads
"Search through everything else" in mm_update_next_owner() can hit a
kthread which adopted this "mm" via use_mm(), it should not be used as
mm->owner.  Add the PF_KTHREAD check.

While at it, change this code to use for_each_process_thread() instead
of deprecated do_each_thread/while_each_thread.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Peter Chiang <pchiang@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:03 -07:00
Oleg Nesterov f98bafa06a memcg: kill CONFIG_MM_OWNER
CONFIG_MM_OWNER makes no sense.  It is not user-selectable, it is only
selected by CONFIG_MEMCG automatically.  So we can kill this option in
init/Kconfig and do s/CONFIG_MM_OWNER/CONFIG_MEMCG/ globally.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:01 -07:00
Oleg Nesterov 7c733eb3ea wait: WSTOPPED|WCONTINUED doesn't work if a zombie leader is traced by another process
Even if the main thread is dead the process still can stop/continue.
However, if the leader is ptraced wait_consider_task(ptrace => false)
always skips wait_task_stopped/wait_task_continued, so WSTOPPED or
WCONTINUED can never work for the natural parent in this case.

Move the "A zombie ptracee is only visible to its ptracer" check into the
"if (!delay_group_leader(p))" block.  ->notask_error is cleared by the
"fall through" code below.

This depends on the previous change, wait_task_stopped/continued must be
avoided if !delay_group_leader() and the tracer is ->real_parent.
Otherwise WSTOPPED|WEXITED could wrongly report "stopped" when the child
is already dead (single-threaded or not).  If it is traced by another task
then the "stopped" state is fine until the debugger detaches and reveals a
zombie state.

Stupid test-case:

	void *tfunc(void *arg)
	{
		sleep(1);	// wait for zombie leader
		raise(SIGSTOP);
		exit(0x13);
		return NULL;
	}

	int run_child(void)
	{
		pthread_t thread;

		if (!fork()) {
			int tracee = getppid();

			assert(ptrace(PTRACE_ATTACH, tracee, 0,0) == 0);
			do
				ptrace(PTRACE_CONT, tracee, 0,0);
			while (wait(NULL) > 0);

			return 0;
		}

		sleep(1);	// wait for PTRACE_ATTACH
		assert(pthread_create(&thread, NULL, tfunc, NULL) == 0);
		pthread_exit(NULL);
	}

	int main(void)
	{
		int child, stat;

		child = fork();
		if (!child)
			return run_child();

		assert(child == waitpid(-1, &stat, WSTOPPED));
		assert(stat == 0x137f);

		kill(child, SIGCONT);

		assert(child == waitpid(-1, &stat, WCONTINUED));
		assert(stat == 0xffff);

		assert(child == waitpid(-1, &stat, 0));
		assert(stat == 0x1300);

		return 0;
	}

Without this patch it hangs in waitpid(WSTOPPED), wait_task_stopped() is
never called.

Note: this doesn't fix all problems with a zombie delay_group_leader(),
WCONTINUED | WEXITED check is not exactly right.  debugger can't assume it
will be notified if another thread reaps the whole thread group.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:06 -07:00
Oleg Nesterov 377d75dafa wait: WSTOPPED|WCONTINUED hangs if a zombie child is traced by real_parent
"A zombie is only visible to its ptracer" logic in wait_consider_task()
is very wrong. Trivial test-case:

	#include <unistd.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <assert.h>

	int main(void)
	{
		int child = fork();

		if (!child) {
			assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
			return 0x23;
		}

		assert(waitid(P_ALL, child, NULL, WEXITED | WNOWAIT) == 0);
		assert(waitid(P_ALL, 0, NULL, WSTOPPED) == -1);
		return 0;
	}

it hangs in waitpid(WSTOPPED) despite the fact it has a single zombie
child.  This is because wait_consider_task(ptrace => 0) sees p->ptrace and
cleares ->notask_error assuming that the debugger should detach and notify
us.

Change wait_consider_task(ptrace => 0) to pretend that ptrace == T if the
child is traced by us.  This really simplifies the logic and allows us to
do more fixes, see the next changes.  This also hides the unwanted group
stop state automatically, we can remove another ptrace_reparented() check.

Unfortunately, this adds the following behavioural changes:

	1. Before this patch wait(WEXITED | __WNOTHREAD) does not reap
	   a natural child if it is traced by the caller's sub-thread.

	   Hopefully nobody will ever notice this change, and I think
	   that nobody should rely on this behaviour anyway.

	2. SIGNAL_STOP_CONTINUED is no longer hidden from debugger if
	   it is real parent.

	   While this change comes as a side effect, I think it is good
	   by itself. The group continued state can not be consumed by
	   another process in this case, it doesn't depend on ptrace,
	   it doesn't make sense to hide it from real parent.

	   Perhaps we should add the thread_group_leader() check before
	   wait_task_continued()? May be, but this shouldn't depend on
	   ptrace_reparented().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:06 -07:00
Oleg Nesterov b3ab03160d wait: completely ignore the EXIT_DEAD tasks
Now that EXIT_DEAD is the terminal state it doesn't make sense to call
eligible_child() or security_task_wait() if the task is really dead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:06 -07:00
Oleg Nesterov b436069059 wait: use EXIT_TRACE only if thread_group_leader(zombie)
wait_task_zombie() always uses EXIT_TRACE/ptrace_unlink() if
ptrace_reparented().  This is suboptimal and a bit confusing: we do not
need do_notify_parent(p) if !thread_group_leader(p) and in this case we
also do not need ptrace_unlink(), we can rely on ptrace_release_task().

Change wait_task_zombie() to check thread_group_leader() along with
ptrace_reparented() and simplify the final p->exit_state transition.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:05 -07:00
Oleg Nesterov abd50b39e7 wait: introduce EXIT_TRACE to avoid the racy EXIT_DEAD->EXIT_ZOMBIE transition
wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and
drops tasklist_lock.  If this task is not the natural child and it is
traced, we change its state back to EXIT_ZOMBIE for ->real_parent.

The last transition is racy, this is even documented in 50b8d25748
"ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE
race".  wait_consider_task() tries to detect this transition and clear
->notask_error but we can't rely on ptrace_reparented(), debugger can
exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE.

And there is another problem which were missed before: this transition
can also race with reparent_leader() which doesn't reset >exit_signal if
EXIT_DEAD, assuming that this task must be reaped by someone else.  So
the tracee can be re-parented with ->exit_signal != SIGCHLD, and if
/sbin/init doesn't use __WALL it becomes unreapable.  This was fixed by
the previous commit, but it was the temporary hack.

1. Add the new exit_state, EXIT_TRACE. It means that the task is the
   traced zombie, debugger is going to detach and notify its natural
   parent.

   This new state is actually EXIT_ZOMBIE | EXIT_DEAD. This way we
   can avoid the changes in proc/kgdb code, get_task_state() still
   reports "X (dead)" in this case.

   Note: with or without this change userspace can see Z -> X -> Z
   transition. Not really bad, but probably makes sense to fix.

2. Change wait_task_zombie() to use EXIT_TRACE instead of EXIT_DEAD
   if we need to notify the ->real_parent.

3. Revert the previous hack in reparent_leader(), now that EXIT_DEAD
   is always the final state we can safely ignore such a task.

4. Change wait_consider_task() to check EXIT_TRACE separately and kill
   the racy and no longer needed ptrace_reparented() case.

   If ptrace == T an EXIT_TRACE thread should be simply ignored, the
   owner of this state is going to ptrace_unlink() this task. We can
   pretend that it was already removed from ->ptraced list.

   Otherwise we should skip this thread too but clear ->notask_error,
   we must be the natural parent and debugger is going to untrace and
   notify us. IOW, this doesn't differ from "EXIT_ZOMBIE && p->ptrace"
   even if the task was already untraced.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:05 -07:00
Oleg Nesterov dfccbb5e49 wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE race
wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and
drops tasklist_lock.  If this task is not the natural child and it is
traced, we change its state back to EXIT_ZOMBIE for ->real_parent.

The last transition is racy, this is even documented in 50b8d25748
"ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE
race".  wait_consider_task() tries to detect this transition and clear
->notask_error but we can't rely on ptrace_reparented(), debugger can
exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE.

And there is another problem which were missed before: this transition
can also race with reparent_leader() which doesn't reset >exit_signal if
EXIT_DEAD, assuming that this task must be reaped by someone else.  So
the tracee can be re-parented with ->exit_signal != SIGCHLD, and if
/sbin/init doesn't use __WALL it becomes unreapable.

Change reparent_leader() to update ->exit_signal even if EXIT_DEAD.
Note: this is the simple temporary hack for -stable, it doesn't try to
solve all problems, it will be reverted by the next changes.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Lennart Poettering <lpoetter@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:05 -07:00
Guillaume Morin ef9823939e kernel/exit.c: call proc_exit_connector() after exit_state is set
The process events connector delivers a notification when a process
exits.  This is really convenient for a process that spawns and wants to
monitor its children through an epoll-able() interface.

Unfortunately, there is a small window between when the event is
delivered and the child become wait()-able.

This is creates a race if the parent wants to make sure that it knows
about the exit, e.g

pid_t pid = fork();
if (pid > 0) {
	register_interest_for_pid(pid);
	if (waitpid(pid, NULL, WNOHANG) > 0)
	{
	  /* We might have raced with exit() */
	}
	return;
}

/* Child */
execve(...)

register_interest_for_pid() would be telling the the connector socket
reader to pay attention to events related to pid.

Though this is not a bug, I think it would make the connector a bit more
usable if this race was closed by simply moving the call to
proc_exit_connector() from just before exit_notify() to right after.

Oleg said:

: Even with this patch the code above is still "racy" if the child is
: multi-threaded.  Plus it should obviously filter-out subthreads.  And
: afaics there is no way to make it reliable, even if you change the code
: above so that waitpid() is called only after the last thread exits WNOHANG
: still can fail.

Signed-off-by: Guillaume Morin <guillaume@morinfr.org>
Cc: Matt Helsley <matt.helsley@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:04 -07:00
Oleg Nesterov 4bcb8232cf exit: move check_stack_usage() to the end of do_exit()
It is not clear why check_stack_usage() is called so early and thus it
never checks the stack usage in, say, exit_notify() or
flush_ptrace_hw_breakpoint() or other functions which are only called by
do_exit().

Move the callsite down to the last preempt_disable/schedule.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:04 -07:00
Oleg Nesterov c39df5fa37 exit: call disassociate_ctty() before exit_task_namespaces()
Commit 8aac62706a ("move exit_task_namespaces() outside of
exit_notify()") breaks pppd and the exiting service crashes the kernel:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
    IP: ppp_register_channel+0x13/0x20 [ppp_generic]
    Call Trace:
      ppp_asynctty_open+0x12b/0x170 [ppp_async]
      tty_ldisc_open.isra.2+0x27/0x60
      tty_ldisc_hangup+0x1e3/0x220
      __tty_hangup+0x2c4/0x440
      disassociate_ctty+0x61/0x270
      do_exit+0x7f2/0xa50

ppp_register_channel() needs ->net_ns and current->nsproxy == NULL.

Move disassociate_ctty() before exit_task_namespaces(), it doesn't make
sense to delay it after perf_event_exit_task() or cgroup_exit().

This also allows to use task_work_add() inside the (nontrivial) code
paths in disassociate_ctty().

Investigated by Peter Hurley.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Sree Harsha Totakura <sreeharsha@totakura.in>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Sree Harsha Totakura <sreeharsha@totakura.in>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>	[v3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:03 -07:00
Li Zefan 1ec41830e0 cgroup: remove useless argument from cgroup_exit()
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-29 09:15:54 -04:00
Oleg Nesterov 0c740d0afc introduce for_each_thread() to replace the buggy while_each_thread()
while_each_thread() and next_thread() should die, almost every lockless
usage is wrong.

1. Unless g == current, the lockless while_each_thread() is not safe.

   while_each_thread(g, t) can loop forever if g exits, next_thread()
   can't reach the unhashed thread in this case. Note that this can
   happen even if g is the group leader, it can exec.

2. Even if while_each_thread() itself was correct, people often use
   it wrongly.

   It was never safe to just take rcu_read_lock() and loop unless
   you verify that pid_alive(g) == T, even the first next_thread()
   can point to the already freed/reused memory.

This patch adds signal_struct->thread_head and task->thread_node to
create the normal rcu-safe list with the stable head.  The new
for_each_thread(g, t) helper is always safe under rcu_read_lock() as
long as this task_struct can't go away.

Note: of course it is ugly to have both task_struct->thread_node and the
old task_struct->thread_group, we will kill it later, after we change
the users of while_each_thread() to use for_each_thread().

Perhaps we can kill it even before we convert all users, we can
reimplement next_thread(t) using the new thread_head/thread_node.  But
we can't do this right now because this will lead to subtle behavioural
changes.  For example, do/while_each_thread() always sees at least one
task, while for_each_thread() can do nothing if the whole thread group
has died.  Or thread_group_empty(), currently its semantics is not clear
unless thread_group_leader(p) and we need to audit the callers before we
can change it.

So this patch adds the new interface which has to coexist with the old
one for some time, hopefully the next changes will be more or less
straightforward and the old one will go away soon.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Sergey Dyasly <dserrg@gmail.com>
Tested-by: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: "Ma, Xindong" <xindong.ma@intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: "Tu, Xiaobing" <xiaobing.tu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Oleg Nesterov 7c8df28633 ptrace: revert "Prepare to fix racy accesses on task breakpoints"
This reverts commit bf26c01849 ("Prepare to fix racy accesses on task
breakpoints").

The patch was fine but we can no longer race with SIGKILL after commit
9899d11f65 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.

Now that ptrace_get_breakpoints/ptrace_put_breakpoints have no callers,
we can kill them and remove task->ptrace_bp_refcnt.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:26 -07:00
Linus Torvalds 7f0ef0267e Merge branch 'akpm' (updates from Andrew Morton)
Merge first patch-bomb from Andrew Morton:
 - various misc bits
 - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
   distracted.  There has been quite a bit of activity.
 - About half the MM queue
 - Some backlight bits
 - Various lib/ updates
 - checkpatch updates
 - zillions more little rtc patches
 - ptrace
 - signals
 - exec
 - procfs
 - rapidio
 - nbd
 - aoe
 - pps
 - memstick
 - tools/testing/selftests updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits)
  tools/testing/selftests: don't assume the x bit is set on scripts
  selftests: add .gitignore for kcmp
  selftests: fix clean target in kcmp Makefile
  selftests: add .gitignore for vm
  selftests: add hugetlbfstest
  self-test: fix make clean
  selftests: exit 1 on failure
  kernel/resource.c: remove the unneeded assignment in function __find_resource
  aio: fix wrong comment in aio_complete()
  drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
  drivers/memstick/host/r592.c: convert to module_pci_driver
  drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
  pps-gpio: add device-tree binding and support
  drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
  drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
  drivers/parport/share.c: use kzalloc
  Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
  aoe: update internal version number to v83
  aoe: update copyright date
  aoe: perform I/O completions in parallel
  ...
2013-07-03 17:12:13 -07:00
Oleg Nesterov 81dabb4641 exit.c: unexport __set_special_pids()
Move __set_special_pids() from exit.c to sys.c close to its single caller
and make it static.

And rename it to set_special_pids(), another helper with this name has
gone away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:02 -07:00
Rafael J. Wysocki 207bc1181b Merge branch 'freezer'
* freezer:
  af_unix: use freezable blocking calls in read
  sigtimedwait: use freezable blocking call
  nanosleep: use freezable blocking call
  futex: use freezable blocking call
  select: use freezable blocking call
  epoll: use freezable blocking call
  binder: use freezable blocking calls
  freezer: add new freezable helpers using freezer_do_not_count()
  freezer: convert freezable helpers to static inline where possible
  freezer: convert freezable helpers to freezer_do_not_count()
  freezer: skip waking up tasks with PF_FREEZER_SKIP set
  freezer: shorten freezer sleep time using exponential backoff
  lockdep: check that no locks held at freeze time
  lockdep: remove task argument from debug_check_no_locks_held
  freezer: add unsafe versions of freezable helpers for CIFS
  freezer: add unsafe versions of freezable helpers for NFS
2013-06-28 13:00:53 +02:00
Oleg Nesterov 8aac62706a move exit_task_namespaces() outside of exit_notify()
exit_notify() does exit_task_namespaces() after
forget_original_parent(). This was needed to ensure that ->nsproxy
can't be cleared prematurely, an exiting child we are going to
reparent can do do_notify_parent() and use the parent's (ours) pid_ns.

However, after 32084504 "pidns: use task_active_pid_ns in
do_notify_parent" ->nsproxy != NULL is no longer needed, we rely
on task_active_pid_ns().

Move exit_task_namespaces() from exit_notify() to do_exit(), after
exit_fs() and before exit_task_work().

This solves the problem reported by Andrey, free_ipc_ns()->shm_destroy()
does fput() which needs task_work_add().

Note: this particular problem can be fixed if we change fput(), and
that change makes sense anyway. But there is another reason to move
the callsite. The original reason for exit_task_namespaces() from
the middle of exit_notify() was subtle and it has already gone away,
now this looks confusing. And this allows us do simplify exit_notify(),
we can avoid unlock/lock(tasklist) and we can use ->exit_state instead
of PF_EXITING in forget_original_parent().

Reported-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-15 05:39:08 +04:00
Colin Cross 1b1d2fb444 lockdep: remove task argument from debug_check_no_locks_held
The only existing caller to debug_check_no_locks_held calls it
with 'current' as the task, and the freezer needs to call
debug_check_no_locks_held but doesn't already have a current
task pointer, so remove the argument.  It is already assuming
that the current task is relevant by dumping the current stack
trace as part of the warning.

This was originally part of 6aa9707099 (lockdep: check that
no locks held at freeze time) which was reverted in
dbf520a9d7.

Original-author: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12 14:16:21 +02:00