Commit Graph

149 Commits

Author SHA1 Message Date
Al Viro 3767e255b3 switch ->setxattr() to passing dentry and inode separately
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e64.  Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.

Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-27 20:09:16 -04:00
Linus Torvalds 3aa2fc1667 driver core update for 4.7-rc1
Here's the "big" driver core update for 4.7-rc1.
 
 Mostly just debugfs changes, the long-known and messy races with removing
 debugfs files should be fixed thanks to the great work of Nicolai Stange.  We
 also have some isa updates in here (the x86 maintainers told me to take it
 through this tree), a new warning when we run out of dynamic char major
 numbers, and a few other assorted changes, details in the shortlog.
 
 All have been in linux-next for some time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0mwACgkQMUfUDdst+ynjXACgjNxR5nMUiM8ZuuD0i4Xj7VXd
 hnIAoM08+XDCv41noGdAcKv+2WZVZWMC
 =i+0H
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the "big" driver core update for 4.7-rc1.

  Mostly just debugfs changes, the long-known and messy races with
  removing debugfs files should be fixed thanks to the great work of
  Nicolai Stange.  We also have some isa updates in here (the x86
  maintainers told me to take it through this tree), a new warning when
  we run out of dynamic char major numbers, and a few other assorted
  changes, details in the shortlog.

  All have been in linux-next for some time with no reported issues"

* tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
  Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case"
  gpio: ws16c48: Utilize the ISA bus driver
  gpio: 104-idio-16: Utilize the ISA bus driver
  gpio: 104-idi-48: Utilize the ISA bus driver
  gpio: 104-dio-48e: Utilize the ISA bus driver
  watchdog: ebc-c384_wdt: Utilize the ISA bus driver
  iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
  iio: stx104: Add X86 dependency to STX104 Kconfig option
  Documentation: Add ISA bus driver documentation
  isa: Implement the max_num_isa_dev macro
  isa: Implement the module_isa_driver macro
  pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS
  isa: Decouple X86_32 dependency from the ISA Kconfig option
  driver-core: use 'dev' argument in dev_dbg_ratelimited stub
  base: dd: don't remove driver_data in -EPROBE_DEFER case
  kernfs: Move faulting copy_user operations outside of the mutex
  devcoredump: add scatterlist support
  debugfs: unproxify files created through debugfs_create_u32_array()
  debugfs: unproxify files created through debugfs_create_blob()
  debugfs: unproxify files created through debugfs_create_bool()
  ...
2016-05-20 21:26:15 -07:00
Linus Torvalds 7f427d3a60 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull parallel filesystem directory handling update from Al Viro.

This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.

The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.

The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).

A more detailed explanation of the process from Al Viro:
 "The xattr work starts with some acl fixes, then switches ->getxattr to
  passing inode and dentry separately.  This is the point where the
  things start to get tricky - that got merged into the very beginning
  of the -rc3-based #work.lookups, to allow untangling the
  security_d_instantiate() mess.  The xattr work itself proceeds to
  switch a lot of filesystems to generic_...xattr(); no complications
  there.

  After that initial xattr work, the series then does the following:

   - untangle security_d_instantiate()

   - convert a bunch of open-coded lookup_one_len_unlocked() to calls of
     that thing; one such place (in overlayfs) actually yields a trivial
     conflict with overlayfs fixes later in the cycle - overlayfs ended
     up switching to a variant of lookup_one_len_unlocked() sans the
     permission checks.  I would've dropped that commit (it gets
     overridden on merge from #ovl-fixes in #for-next; proper resolution
     is to use the variant in mainline fs/overlayfs/super.c), but I
     didn't want to rebase the damn thing - it was fairly late in the
     cycle...

   - some filesystems had managed to depend on lookup/lookup exclusion
     for *fs-internal* data structures in a way that would break if we
     relaxed the VFS exclusion.  Fixing hadn't been hard, fortunately.

   - core of that series - parallel lookup machinery, replacing
     ->i_mutex with rwsem, making lookup_slow() take it only shared.  At
     that point lookups happen in parallel; lookups on the same name
     wait for the in-progress one to be done with that dentry.

     Surprisingly little code, at that - almost all of it is in
     fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
     making it use the new primitive and actually switching to locking
     shared.

   - parallel readdir stuff - first of all, we provide the exclusion on
     per-struct file basis, same as we do for read() vs lseek() for
     regular files.  That takes care of most of the needed exclusion in
     readdir/readdir; however, these guys are trickier than lookups, so
     I went for switching them one-by-one.  To do that, a new method
     '->iterate_shared()' is added and filesystems are switched to it
     as they are either confirmed to be OK with shared lock on directory
     or fixed to be OK with that.  I hope to kill the original method
     come next cycle (almost all in-tree filesystems are switched
     already), but it's still not quite finished.

   - several filesystems get switched to parallel readdir.  The
     interesting part here is dealing with dcache preseeding by readdir;
     that needs minor adjustment to be safe with directory locked only
     shared.

     Most of the filesystems doing that got switched to in those
     commits.  Important exception: NFS.  Turns out that NFS folks, with
     their, er, insistence on VFS getting the fuck out of the way of the
     Smart Filesystem Code That Knows How And What To Lock(tm) have
     grown the locking of their own.  They had their own homegrown
     rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
     is the reader there).  Of course, with VFS getting the fuck out of
     the way, as requested, the actual smarts of the smart filesystem
     code etc. had become exposed...

   - do_last/lookup_open/atomic_open cleanups.  As the result, open()
     without O_CREAT locks the directory only shared.  Including the
     ->atomic_open() case.  Backmerge from #for-linus in the middle of
     that - atomic_open() fix got brought in.

   - then comes NFS switch to saner (VFS-based ;-) locking, killing the
     homegrown "lookup and readdir are writers" kinda-sorta rwsem.  All
     exclusion for sillyunlink/lookup is done by the parallel lookups
     mechanism.  Exclusion between sillyunlink and rmdir is a real rwsem
     now - rmdir being the writer.

     Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
     now.

   - the rest of the series consists of switching a lot of filesystems
     to parallel readdir; in a lot of cases ->llseek() gets simplified
     as well.  One backmerge in there (again, #for-linus - rockridge
     fix)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
  ext4: switch to ->iterate_shared()
  hfs: switch to ->iterate_shared()
  hfsplus: switch to ->iterate_shared()
  hostfs: switch to ->iterate_shared()
  hpfs: switch to ->iterate_shared()
  hpfs: handle allocation failures in hpfs_add_pos()
  gfs2: switch to ->iterate_shared()
  f2fs: switch to ->iterate_shared()
  afs: switch to ->iterate_shared()
  befs: switch to ->iterate_shared()
  befs: constify stuff a bit
  isofs: switch to ->iterate_shared()
  get_acorn_filename(): deobfuscate a bit
  btrfs: switch to ->iterate_shared()
  logfs: no need to lock directory in lseek
  switch ecryptfs to ->iterate_shared
  9p: switch to ->iterate_shared()
  fat: switch to ->iterate_shared()
  romfs, squashfs: switch to ->iterate_shared()
  more trivial ->iterate_shared conversions
  ...
2016-05-17 11:01:31 -07:00
Serge E. Hallyn 3cc9b23c81 kernfs: kernfs_sop_show_path: don't return 0 after seq_dentry call
Our caller expects 0 on success, not >0.

This fixes a bug in the patch

	cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces

where /sys does not show up in mountinfo, breaking criu.

Thanks for catching this, Andrei.

Reported-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12 11:03:51 -04:00
Serge E. Hallyn 4f41fc5962 cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces
Patch summary:

When showing a cgroupfs entry in mountinfo, show the path of the mount
root dentry relative to the reader's cgroup namespace root.

Short explanation (courtesy of mkerrisk):

If we create a new cgroup namespace, then we want both /proc/self/cgroup
and /proc/self/mountinfo to show cgroup paths that are correctly
virtualized with respect to the cgroup mount point.  Previous to this
patch, /proc/self/cgroup shows the right info, but /proc/self/mountinfo
does not.

Long version:

When a uid 0 task which is in freezer cgroup /a/b, unshares a new cgroup
namespace, and then mounts a new instance of the freezer cgroup, the new
mount will be rooted at /a/b.  The root dentry field of the mountinfo
entry will show '/a/b'.

 cat > /tmp/do1 << EOF
 mount -t cgroup -o freezer freezer /mnt
 grep freezer /proc/self/mountinfo
 EOF

 unshare -Gm  bash /tmp/do1
 > 330 160 0:34 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime - cgroup cgroup rw,freezer
 > 355 133 0:34 /a/b /mnt rw,relatime - cgroup freezer rw,freezer

The task's freezer cgroup entry in /proc/self/cgroup will simply show
'/':

 grep freezer /proc/self/cgroup
 9:freezer:/

If instead the same task simply bind mounts the /a/b cgroup directory,
the resulting mountinfo entry will again show /a/b for the dentry root.
However in this case the task will find its own cgroup at /mnt/a/b,
not at /mnt:

 mount --bind /sys/fs/cgroup/freezer/a/b /mnt
 130 25 0:34 /a/b /mnt rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,freezer

In other words, there is no way for the task to know, based on what is
in mountinfo, which cgroup directory is its own.

Example (by mkerrisk):

First, a little script to save some typing and verbiage:

echo -e "\t/proc/self/cgroup:\t$(cat /proc/self/cgroup | grep freezer)"
cat /proc/self/mountinfo | grep freezer |
        awk '{print "\tmountinfo:\t\t" $4 "\t" $5}'

Create cgroup, place this shell into the cgroup, and look at the state
of the /proc files:

2653
2653                         # Our shell
14254                        # cat(1)
        /proc/self/cgroup:      10:freezer:/a/b
        mountinfo:              /       /sys/fs/cgroup/freezer

Create a shell in new cgroup and mount namespaces. The act of creating
a new cgroup namespace causes the process's current cgroups directories
to become its cgroup root directories. (Here, I'm using my own version
of the "unshare" utility, which takes the same options as the util-linux
version):

Look at the state of the /proc files:

        /proc/self/cgroup:      10:freezer:/
        mountinfo:              /       /sys/fs/cgroup/freezer

The third entry in /proc/self/cgroup (the pathname of the cgroup inside
the hierarchy) is correctly virtualized w.r.t. the cgroup namespace, which
is rooted at /a/b in the outer namespace.

However, the info in /proc/self/mountinfo is not for this cgroup
namespace, since we are seeing a duplicate of the mount from the
old mount namespace, and the info there does not correspond to the
new cgroup namespace. However, trying to create a new mount still
doesn't show us the right information in mountinfo:

                                      # propagating to other mountns
        /proc/self/cgroup:      7:freezer:/
        mountinfo:              /a/b    /mnt/freezer

The act of creating a new cgroup namespace caused the process's
current freezer directory, "/a/b", to become its cgroup freezer root
directory. In other words, the pathname directory of the directory
within the newly mounted cgroup filesystem should be "/",
but mountinfo wrongly shows us "/a/b". The consequence of this is
that the process in the cgroup namespace cannot correctly construct
the pathname of its cgroup root directory from the information in
/proc/PID/mountinfo.

With this patch, the dentry root field in mountinfo is shown relative
to the reader's cgroup namespace.  So the same steps as above:

        /proc/self/cgroup:      10:freezer:/a/b
        mountinfo:              /       /sys/fs/cgroup/freezer
        /proc/self/cgroup:      10:freezer:/
        mountinfo:              /../..  /sys/fs/cgroup/freezer
        /proc/self/cgroup:      10:freezer:/
        mountinfo:              /       /mnt/freezer

cgroup.clone_children  freezer.parent_freezing  freezer.state      tasks
cgroup.procs           freezer.self_freezing    notify_on_release
3164
2653                   # First shell that placed in this cgroup
3164                   # Shell started by 'unshare'
14197                  # cat(1)

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:15:03 -04:00
Al Viro 8cb0d2c1c7 kernfs: no point locking directory around that generic_file_llseek()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-09 11:41:13 -04:00
Al Viro 779b839133 kernfs: use lookup_one_len_unlocked()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-02 19:47:21 -04:00
Al Viro 84695ffee7 Merge getxattr prototype change into work.lookups
The rest of work.xattr stuff isn't needed for this branch
2016-05-02 19:45:47 -04:00
Serge Hallyn e99ed4de17 kernfs_path_from_node_locked: don't overwrite nlen
We've calculated @len to be the bytes we need for '/..' entries from
@kn_from to the common ancestor, and calculated @nlen to be the extra
bytes we need to get from the common ancestor to @kn_to.  We use them
as such at the end.  But in the loop copying the actual entries, we
overwrite @nlen.  Use a temporary variable for that instead.

Without this, the return length, when the buffer is large enough, is
wrong.  (When the buffer is NULL or too small, the returned value is
correct. The buffer contents are also correct.)

Interestingly, no callers of this function are affected by this as of
yet.  However the upcoming cgroup_show_path() will be.

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2016-05-02 12:36:00 -04:00
Chris Wilson e4234a1fc3 kernfs: Move faulting copy_user operations outside of the mutex
A fault in a user provided buffer may lead anywhere, and lockdep warns
that we have a potential deadlock between the mm->mmap_sem and the
kernfs file mutex:

[   82.811702] ======================================================
[   82.811705] [ INFO: possible circular locking dependency detected ]
[   82.811709] 4.5.0-rc4-gfxbench+ #1 Not tainted
[   82.811711] -------------------------------------------------------
[   82.811714] kms_setmode/5859 is trying to acquire lock:
[   82.811717]  (&dev->struct_mutex){+.+.+.}, at: [<ffffffff8150d9c1>] drm_gem_mmap+0x1a1/0x270
[   82.811731]
but task is already holding lock:
[   82.811734]  (&mm->mmap_sem){++++++}, at: [<ffffffff8117b364>] vm_mmap_pgoff+0x44/0xa0
[   82.811745]
which lock already depends on the new lock.

[   82.811749]
the existing dependency chain (in reverse order) is:
[   82.811752]
-> #3 (&mm->mmap_sem){++++++}:
[   82.811761]        [<ffffffff810cc883>] lock_acquire+0xc3/0x1d0
[   82.811766]        [<ffffffff8118bc65>] __might_fault+0x75/0xa0
[   82.811771]        [<ffffffff8124da4a>] kernfs_fop_write+0x8a/0x180
[   82.811787]        [<ffffffff811d1023>] __vfs_write+0x23/0xe0
[   82.811792]        [<ffffffff811d1d74>] vfs_write+0xa4/0x190
[   82.811797]        [<ffffffff811d2c14>] SyS_write+0x44/0xb0
[   82.811801]        [<ffffffff817bb81b>] entry_SYSCALL_64_fastpath+0x16/0x73
[   82.811807]
-> #2 (s_active#6){++++.+}:
[   82.811814]        [<ffffffff810cc883>] lock_acquire+0xc3/0x1d0
[   82.811819]        [<ffffffff8124c070>] __kernfs_remove+0x210/0x2f0
[   82.811823]        [<ffffffff8124d040>] kernfs_remove_by_name_ns+0x40/0xa0
[   82.811828]        [<ffffffff8124e9e0>] sysfs_remove_file_ns+0x10/0x20
[   82.811832]        [<ffffffff815318d4>] device_del+0x124/0x250
[   82.811837]        [<ffffffff81531a19>] device_unregister+0x19/0x60
[   82.811841]        [<ffffffff8153c051>] cpu_cache_sysfs_exit+0x51/0xb0
[   82.811846]        [<ffffffff8153c628>] cacheinfo_cpu_callback+0x38/0x70
[   82.811851]        [<ffffffff8109ae89>] notifier_call_chain+0x39/0xa0
[   82.811856]        [<ffffffff8109aef9>] __raw_notifier_call_chain+0x9/0x10
[   82.811860]        [<ffffffff810786de>] cpu_notify+0x1e/0x40
[   82.811865]        [<ffffffff81078779>] cpu_notify_nofail+0x9/0x20
[   82.811869]        [<ffffffff81078ac3>] _cpu_down+0x233/0x340
[   82.811874]        [<ffffffff81079019>] disable_nonboot_cpus+0xc9/0x350
[   82.811878]        [<ffffffff810d2e11>] suspend_devices_and_enter+0x5a1/0xb50
[   82.811883]        [<ffffffff810d3903>] pm_suspend+0x543/0x8d0
[   82.811888]        [<ffffffff810d1b77>] state_store+0x77/0xe0
[   82.811892]        [<ffffffff813fa68f>] kobj_attr_store+0xf/0x20
[   82.811897]        [<ffffffff8124e740>] sysfs_kf_write+0x40/0x50
[   82.811902]        [<ffffffff8124dafc>] kernfs_fop_write+0x13c/0x180
[   82.811906]        [<ffffffff811d1023>] __vfs_write+0x23/0xe0
[   82.811910]        [<ffffffff811d1d74>] vfs_write+0xa4/0x190
[   82.811914]        [<ffffffff811d2c14>] SyS_write+0x44/0xb0
[   82.811918]        [<ffffffff817bb81b>] entry_SYSCALL_64_fastpath+0x16/0x73
[   82.811923]
-> #1 (cpu_hotplug.lock){+.+.+.}:
[   82.811929]        [<ffffffff810cc883>] lock_acquire+0xc3/0x1d0
[   82.811933]        [<ffffffff817b6f72>] mutex_lock_nested+0x62/0x3b0
[   82.811940]        [<ffffffff810784c1>] get_online_cpus+0x61/0x80
[   82.811944]        [<ffffffff811170eb>] stop_machine+0x1b/0xe0
[   82.811949]        [<ffffffffa0178edd>] gen8_ggtt_insert_entries__BKL+0x2d/0x30 [i915]
[   82.812009]        [<ffffffffa017d3a6>] ggtt_bind_vma+0x46/0x70 [i915]
[   82.812045]        [<ffffffffa017eb70>] i915_vma_bind+0x140/0x290 [i915]
[   82.812081]        [<ffffffffa01862b9>] i915_gem_object_do_pin+0x899/0xb00 [i915]
[   82.812117]        [<ffffffffa0186555>] i915_gem_object_pin+0x35/0x40 [i915]
[   82.812154]        [<ffffffffa019a23e>] intel_init_pipe_control+0xbe/0x210 [i915]
[   82.812192]        [<ffffffffa0197312>] intel_logical_rings_init+0xe2/0xde0 [i915]
[   82.812232]        [<ffffffffa0186fe3>] i915_gem_init+0xf3/0x130 [i915]
[   82.812278]        [<ffffffffa02097ed>] i915_driver_load+0xf2d/0x1770 [i915]
[   82.812318]        [<ffffffff81512474>] drm_dev_register+0xa4/0xb0
[   82.812323]        [<ffffffff8151467e>] drm_get_pci_dev+0xce/0x1e0
[   82.812328]        [<ffffffffa01472cf>] i915_pci_probe+0x2f/0x50 [i915]
[   82.812360]        [<ffffffff8143f907>] pci_device_probe+0x87/0xf0
[   82.812366]        [<ffffffff81535f89>] driver_probe_device+0x229/0x450
[   82.812371]        [<ffffffff81536233>] __driver_attach+0x83/0x90
[   82.812375]        [<ffffffff81533c61>] bus_for_each_dev+0x61/0xa0
[   82.812380]        [<ffffffff81535879>] driver_attach+0x19/0x20
[   82.812384]        [<ffffffff8153535f>] bus_add_driver+0x1ef/0x290
[   82.812388]        [<ffffffff81536e9b>] driver_register+0x5b/0xe0
[   82.812393]        [<ffffffff8143e83b>] __pci_register_driver+0x5b/0x60
[   82.812398]        [<ffffffff81514866>] drm_pci_init+0xd6/0x100
[   82.812402]        [<ffffffffa027c094>] 0xffffffffa027c094
[   82.812406]        [<ffffffff810003de>] do_one_initcall+0xae/0x1d0
[   82.812412]        [<ffffffff811595a0>] do_init_module+0x5b/0x1cb
[   82.812417]        [<ffffffff81106160>] load_module+0x1c20/0x2480
[   82.812422]        [<ffffffff81106bae>] SyS_finit_module+0x7e/0xa0
[   82.812428]        [<ffffffff817bb81b>] entry_SYSCALL_64_fastpath+0x16/0x73
[   82.812433]
-> #0 (&dev->struct_mutex){+.+.+.}:
[   82.812439]        [<ffffffff810cbe59>] __lock_acquire+0x1fc9/0x20f0
[   82.812443]        [<ffffffff810cc883>] lock_acquire+0xc3/0x1d0
[   82.812456]        [<ffffffff8150d9e7>] drm_gem_mmap+0x1c7/0x270
[   82.812460]        [<ffffffff81196a14>] mmap_region+0x334/0x580
[   82.812466]        [<ffffffff81196fc4>] do_mmap+0x364/0x410
[   82.812470]        [<ffffffff8117b38d>] vm_mmap_pgoff+0x6d/0xa0
[   82.812474]        [<ffffffff811950f4>] SyS_mmap_pgoff+0x184/0x220
[   82.812479]        [<ffffffff8100a0fd>] SyS_mmap+0x1d/0x20
[   82.812484]        [<ffffffff817bb81b>] entry_SYSCALL_64_fastpath+0x16/0x73
[   82.812489]
other info that might help us debug this:

[   82.812493] Chain exists of:
  &dev->struct_mutex --> s_active#6 --> &mm->mmap_sem

[   82.812502]  Possible unsafe locking scenario:

[   82.812506]        CPU0                    CPU1
[   82.812508]        ----                    ----
[   82.812510]   lock(&mm->mmap_sem);
[   82.812514]                                lock(s_active#6);
[   82.812519]                                lock(&mm->mmap_sem);
[   82.812522]   lock(&dev->struct_mutex);
[   82.812526]
 *** DEADLOCK ***

[   82.812531] 1 lock held by kms_setmode/5859:
[   82.812533]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8117b364>] vm_mmap_pgoff+0x44/0xa0
[   82.812541]
stack backtrace:
[   82.812547] CPU: 0 PID: 5859 Comm: kms_setmode Not tainted 4.5.0-rc4-gfxbench+ #1
[   82.812550] Hardware name:                  /NUC5CPYB, BIOS PYBSWCEL.86A.0040.2015.0814.1353 08/14/2015
[   82.812553]  0000000000000000 ffff880079407bf0 ffffffff813f8505 ffffffff825fb270
[   82.812560]  ffffffff825c4190 ffff880079407c30 ffffffff810c84ac ffff880079407c90
[   82.812566]  ffff8800797ed328 ffff8800797ecb00 0000000000000001 ffff8800797ed350
[   82.812573] Call Trace:
[   82.812578]  [<ffffffff813f8505>] dump_stack+0x67/0x92
[   82.812582]  [<ffffffff810c84ac>] print_circular_bug+0x1fc/0x310
[   82.812586]  [<ffffffff810cbe59>] __lock_acquire+0x1fc9/0x20f0
[   82.812590]  [<ffffffff810cc883>] lock_acquire+0xc3/0x1d0
[   82.812594]  [<ffffffff8150d9c1>] ? drm_gem_mmap+0x1a1/0x270
[   82.812599]  [<ffffffff8150d9e7>] drm_gem_mmap+0x1c7/0x270
[   82.812603]  [<ffffffff8150d9c1>] ? drm_gem_mmap+0x1a1/0x270
[   82.812608]  [<ffffffff81196a14>] mmap_region+0x334/0x580
[   82.812612]  [<ffffffff81196fc4>] do_mmap+0x364/0x410
[   82.812616]  [<ffffffff8117b38d>] vm_mmap_pgoff+0x6d/0xa0
[   82.812629]  [<ffffffff811950f4>] SyS_mmap_pgoff+0x184/0x220
[   82.812633]  [<ffffffff8100a0fd>] SyS_mmap+0x1d/0x20
[   82.812637]  [<ffffffff817bb81b>] entry_SYSCALL_64_fastpath+0x16/0x73

Highly unlikely though this scenario is, we can avoid the issue entirely
by moving the copy operation from out under the kernfs_get_active()
tracking by assigning the preallocated buffer its own mutex. The
temporary buffer allocation doesn't require mutex locking as it is
entirely local.

The locked section was extended by the addition of the preallocated buf
to speed up md user operations in

commit 2b75869bba
Author: NeilBrown <neilb@suse.de>
Date:   Mon Oct 13 16:41:28 2014 +1100

    sysfs/kernfs: allow attributes to request write buffer be pre-allocated.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94350
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: NeilBrown <neilb@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 10:05:05 -07:00
Greg Kroah-Hartman 5614e77258 Merge 4.6-rc4 into driver-core-next
We want those fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19 04:28:28 +09:00
Al Viro ce23e64013 ->getxattr(): pass dentry and inode as separate arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11 00:48:00 -04:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Deepa Dinamani 3a3a5fece6 fs: kernfs: Replace CURRENT_TIME by current_fs_time()
This is in preparation for the series that transitions
filesystem timestamps to use 64 bit time and hence make
them y2038 safe.

CURRENT_TIME macro will be deleted before merging the
aforementioned series.

Use current_fs_time() instead of CURRENT_TIME for inode
timestamps.

struct kernfs_node is associated with a sysfs file/ directory.
Truncate the values to appropriate time granularity when
writing to inode timestamps of the files.

ktime_get_real_ts() is used to obtain times for
struct kernfs_iattrs. Since these times are later assigned to
inode times using timespec_truncate() for all filesystem based
operations, we can save the supers list traversal time here by
using ktime_get_real_ts() directly.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-29 10:11:44 -07:00
Linus Torvalds 5518f66b5a Merge branch 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup namespace support from Tejun Heo:
 "These are changes to implement namespace support for cgroup which has
  been pending for quite some time now.  It is very straight-forward and
  only affects what part of cgroup hierarchies are visible.

  After unsharing, mounting a cgroup fs will be scoped to the cgroups
  the task belonged to at the time of unsharing and the cgroup paths
  exposed to userland would be adjusted accordingly"

* 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix and restructure error handling in copy_cgroup_ns()
  cgroup: fix alloc_cgroup_ns() error handling in copy_cgroup_ns()
  Add FS_USERNS_FLAG to cgroup fs
  cgroup: Add documentation for cgroup namespaces
  cgroup: mount cgroupns-root when inside non-init cgroupns
  kernfs: define kernfs_node_dentry
  cgroup: cgroup namespace setns support
  cgroup: introduce cgroup namespaces
  sched: new clone flag CLONE_NEWCGROUP for cgroup namespace
  kernfs: Add API to generate relative kernfs path
2016-03-21 10:05:13 -07:00
Aditya Kali fb3c831565 kernfs: define kernfs_node_dentry
Add a new kernfs api is added to lookup the dentry for a particular
kernfs path.

Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-16 13:04:58 -05:00
Aditya Kali 9f6df573a4 kernfs: Add API to generate relative kernfs path
The new function kernfs_path_from_node() generates and returns kernfs
path of a given kernfs_node relative to a given parent kernfs_node.

Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-16 13:04:58 -05:00
Tejun Heo e56ed358af kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[]
kernfs_walk_ns() uses a static path_buf[PATH_MAX] to separate out path
components.  Keeping around the 4k buffer just for kernfs_walk_ns() is
wasteful.  This patch makes it piggyback on kernfs_pr_cont_buf[]
instead.  This requires kernfs_walk_ns() to hold kernfs_rename_lock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07 20:21:35 -08:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Vladimir Davydov b2a209ffa6 Revert "kernfs: do not account ino_ida allocations to memcg"
Currently, all kmem allocations (namely every kmem_cache_alloc, kmalloc,
alloc_kmem_pages call) are accounted to memory cgroup automatically.
Callers have to explicitly opt out if they don't want/need accounting
for some reason.  Such a design decision leads to several problems:

 - kmalloc users are highly sensitive to failures, many of them
   implicitly rely on the fact that kmalloc never fails, while memcg
   makes failures quite plausible.

 - A lot of objects are shared among different containers by design.
   Accounting such objects to one of containers is just unfair.
   Moreover, it might lead to pinning a dead memcg along with its kmem
   caches, which aren't tiny, which might result in noticeable increase
   in memory consumption for no apparent reason in the long run.

 - There are tons of short-lived objects. Accounting them to memcg will
   only result in slight noise and won't change the overall picture, but
   we still have to pay accounting overhead.

For more info, see

 - http://lkml.kernel.org/r/20151105144002.GB15111%40dhcp22.suse.cz
 - http://lkml.kernel.org/r/20151106090555.GK29259@esperanza

Therefore this patchset switches to the white list policy.  Now kmalloc
users have to explicitly opt in by passing __GFP_ACCOUNT flag.

Currently, the list of accounted objects is quite limited and only
includes those allocations that (1) are known to be easily triggered
from userspace and (2) can fail gracefully (for the full list see patch
no.  6) and it still misses many object types.  However, accounting only
those objects should be a satisfactory approximation of the behavior we
used to have for most sane workloads.

This patch (of 6):

Revert 499611ed45 ("kernfs: do not account ino_ida allocations
to memcg").

Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be
fragile and difficult to maintain, because there seem to be many more
allocations that should not be accounted than those that should be.
Besides, false accounting an allocation might result in much worse
consequences than not accounting at all, namely increased memory
consumption due to pinned dead kmem caches.

So it was decided to switch to the white-list policy.  This patch reverts
bits introducing the black-list policy.  The white-list policy will be
introduced later in the series.

Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 16:00:49 -08:00
Linus Torvalds aee3bfa330 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...
2016-01-12 18:57:02 -08:00
Linus Torvalds ddf1d6238d Merge branch 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
 "Andreas' xattr cleanup series.

  It's a followup to his xattr work that went in last cycle; -0.5KLoC"

* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  xattr handlers: Simplify list operation
  ocfs2: Replace list xattr handler operations
  nfs: Move call to security_inode_listsecurity into nfs_listxattr
  xfs: Change how listxattr generates synthetic attributes
  tmpfs: listxattr should include POSIX ACL xattrs
  tmpfs: Use xattr handler infrastructure
  btrfs: Use xattr handler infrastructure
  vfs: Distinguish between full xattr names and proper prefixes
  posix acls: Remove duplicate xattr name definitions
  gfs2: Remove gfs2_xattr_acl_chmod
  vfs: Remove vfs_xattr_cmp
2016-01-11 13:32:10 -08:00
Al Viro fceef393a5 switch ->get_link() to delayed_call, kill ->put_link()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-30 13:01:03 -05:00
Al Viro cd3417c8fc kill free_page_put_link()
all callers are better off with kfree_put_link()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-29 16:03:53 -05:00
Al Viro 6b2553918d replace ->follow_link() with new method that could stay in RCU mode
new method: ->get_link(); replacement of ->follow_link().  The differences
are:
	* inode and dentry are passed separately
	* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
	* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.

It's a flagday change - the old method is gone, all in-tree instances
converted.  Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode.  That'll change
in the next commits.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08 22:41:54 -05:00
Andreas Gruenbacher 786534b92f tmpfs: listxattr should include POSIX ACL xattrs
When a file on tmpfs has an ACL or a Default ACL, listxattr should include the
corresponding xattr name.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 21:34:15 -05:00
Andreas Gruenbacher aa7c5241c3 tmpfs: Use xattr handler infrastructure
Use the VFS xattr handler infrastructure and get rid of similar code in
the filesystem.  For implementing shmem_xattr_handler_set, we need a
version of simple_xattr_set which removes the attribute when value is
NULL.  Use this to implement kernfs_iop_removexattr as well.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 21:34:15 -05:00
Tejun Heo bd96f76a24 kernfs: implement kernfs_walk_and_get()
Implement kernfs_walk_and_get() which is similar to
kernfs_find_and_get() but can walk a path instead of just a name.

v2: Use strlcpy() instead of strlen() + memcpy() as suggested by
    David.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Miller <davem@davemloft.net>
2015-11-20 15:55:52 -05:00
Tejun Heo 9acee9c551 kernfs: implement kernfs_path_len()
Add a function to determine the path length of a kernfs node.  This
for now will be used by writeback tracepoint updates.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:15 -07:00
Linus Torvalds 0cbee99269 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace updates from Eric Biederman:
 "Long ago and far away when user namespaces where young it was realized
  that allowing fresh mounts of proc and sysfs with only user namespace
  permissions could violate the basic rule that only root gets to decide
  if proc or sysfs should be mounted at all.

  Some hacks were put in place to reduce the worst of the damage could
  be done, and the common sense rule was adopted that fresh mounts of
  proc and sysfs should allow no more than bind mounts of proc and
  sysfs.  Unfortunately that rule has not been fully enforced.

  There are two kinds of gaps in that enforcement.  Only filesystems
  mounted on empty directories of proc and sysfs should be ignored but
  the test for empty directories was insufficient.  So in my tree
  directories on proc, sysctl and sysfs that will always be empty are
  created specially.  Every other technique is imperfect as an ordinary
  directory can have entries added even after a readdir returns and
  shows that the directory is empty.  Special creation of directories
  for mount points makes the code in the kernel a smidge clearer about
  it's purpose.  I asked container developers from the various container
  projects to help test this and no holes were found in the set of mount
  points on proc and sysfs that are created specially.

  This set of changes also starts enforcing the mount flags of fresh
  mounts of proc and sysfs are consistent with the existing mount of
  proc and sysfs.  I expected this to be the boring part of the work but
  unfortunately unprivileged userspace winds up mounting fresh copies of
  proc and sysfs with noexec and nosuid clear when root set those flags
  on the previous mount of proc and sysfs.  So for now only the atime,
  read-only and nodev attributes which userspace happens to keep
  consistent are enforced.  Dealing with the noexec and nosuid
  attributes remains for another time.

  This set of changes also addresses an issue with how open file
  descriptors from /proc/<pid>/ns/* are displayed.  Recently readlink of
  /proc/<pid>/fd has been triggering a WARN_ON that has not been
  meaningful since it was added (as all of the code in the kernel was
  converted) and is not now actively wrong.

  There is also a short list of issues that have not been fixed yet that
  I will mention briefly.

  It is possible to rename a directory from below to above a bind mount.
  At which point any directory pointers below the renamed directory can
  be walked up to the root directory of the filesystem.  With user
  namespaces enabled a bind mount of the bind mount can be created
  allowing the user to pick a directory whose children they can rename
  to outside of the bind mount.  This is challenging to fix and doubly
  so because all obvious solutions must touch code that is in the
  performance part of pathname resolution.

  As mentioned above there is also a question of how to ensure that
  developers by accident or with purpose do not introduce exectuable
  files on sysfs and proc and in doing so introduce security regressions
  in the current userspace that will not be immediately obvious and as
  such are likely to require breaking userspace in painful ways once
  they are recognized"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  vfs: Remove incorrect debugging WARN in prepend_path
  mnt: Update fs_fully_visible to test for permanently empty directories
  sysfs: Create mountpoints with sysfs_create_mount_point
  sysfs: Add support for permanently empty directories to serve as mount points.
  kernfs: Add support for always empty directories.
  proc: Allow creating permanently empty directories that serve as mount points
  sysctl: Allow creating permanently empty directories that serve as mountpoints.
  fs: Add helper functions for permanently empty directories.
  vfs: Ignore unlocked mounts in fs_fully_visible
  mnt: Modify fs_fully_visible to deal with locked ro nodev and atime
  mnt: Refactor the logic for mounting sysfs and proc in a user namespace
2015-07-03 15:20:57 -07:00
Eric W. Biederman ea015218f2 kernfs: Add support for always empty directories.
Add a new function kernfs_create_empty_dir that can be used to create
directory that can not be modified.

Update the code to use make_empty_dir_inode when reporting a
permanently empty directory to the vfs.

Update the code to not allow adding to permanently empty directories.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-01 10:36:43 -05:00
Linus Torvalds bbe179f88d Merge branch 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - threadgroup_lock got reorganized so that its users can pick the
   actual locking mechanism to use.  Its only user - cgroups - is
   updated to use a percpu_rwsem instead of per-process rwsem.

   This makes things a bit lighter on hot paths and allows cgroups to
   perform and fail multi-task (a process) migrations atomically.
   Multi-task migrations are used in several places including the
   unified hierarchy.

 - Delegation rule and documentation added to unified hierarchy.  This
   will likely be the last interface update from the cgroup core side
   for unified hierarchy before lifting the devel mask.

 - Some groundwork for the pids controller which is scheduled to be
   merged in the coming devel cycle.

* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: add delegation section to unified hierarchy documentation
  cgroup: require write perm on common ancestor when moving processes on the default hierarchy
  cgroup: separate out cgroup_procs_write_permission() from __cgroup_procs_write()
  kernfs: make kernfs_get_inode() public
  MAINTAINERS: add a cgroup core co-maintainer
  cgroup: fix uninitialised iterator in for_each_subsys_which
  cgroup: replace explicit ss_mask checking with for_each_subsys_which
  cgroup: use bitmask to filter for_each_subsys
  cgroup: add seq_file forward declaration for struct cftype
  cgroup: simplify threadgroup locking
  sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem
  sched, cgroup: reorganize threadgroup locking
  cgroup: switch to unsigned long for bitmasks
  cgroup: reorganize include/linux/cgroup.h
  cgroup: separate out include/linux/cgroup-defs.h
  cgroup: fix some comment typos
2015-06-26 19:50:04 -07:00
Linus Torvalds 8d7804a2f0 Driver core patches for 4.2-rc1
Here is the driver core / firmware changes for 4.2-rc1.
 
 A number of small changes all over the place in the driver core, and in
 the firmware subsystem.  Nothing really major, full details in the
 shortlog.  Some of it is a bit of churn, given that the platform driver
 probing changes was found to not work well, so they were reverted.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlWNoCQACgkQMUfUDdst+ym4JACdFrrXoMt2pb8nl5gMidGyM9/D
 jg8AnRgdW8ArDA/xOarULd/X43eA3J3C
 =Al2B
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the driver core / firmware changes for 4.2-rc1.

  A number of small changes all over the place in the driver core, and
  in the firmware subsystem.  Nothing really major, full details in the
  shortlog.  Some of it is a bit of churn, given that the platform
  driver probing changes was found to not work well, so they were
  reverted.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
  Revert "base/platform: Only insert MEM and IO resources"
  Revert "base/platform: Continue on insert_resource() error"
  Revert "of/platform: Use platform_device interface"
  Revert "base/platform: Remove code duplication"
  firmware: add missing kfree for work on async call
  fs: sysfs: don't pass count == 0 to bin file readers
  base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
  base/platform: Remove code duplication
  of/platform: Use platform_device interface
  base/platform: Continue on insert_resource() error
  base/platform: Only insert MEM and IO resources
  firmware: use const for remaining firmware names
  firmware: fix possible use after free on name on asynchronous request
  firmware: check for file truncation on direct firmware loading
  firmware: fix __getname() missing failure check
  drivers: of/base: move of_init to driver_init
  drivers/base: cacheinfo: fix annoying typo when DT nodes are absent
  sysfs: disambiguate between "error code" and "failure" in comments
  driver-core: fix build for !CONFIG_MODULES
  driver-core: make __device_attach() static
  ...
2015-06-26 15:07:37 -07:00
Linus Torvalds 052b398a43 Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "In this pile: pathname resolution rewrite.

   - recursion in link_path_walk() is gone.

   - nesting limits on symlinks are gone (the only limit remaining is
     that the total amount of symlinks is no more than 40, no matter how
     nested).

   - "fast" (inline) symlinks are handled without leaving rcuwalk mode.

   - stack footprint (independent of the nesting) is below kilobyte now,
     about on par with what it used to be with one level of nested
     symlinks and ~2.8 times lower than it used to be in the worst case.

   - struct nameidata is entirely private to fs/namei.c now (not even
     opaque pointers are being passed around).

   - ->follow_link() and ->put_link() calling conventions had been
     changed; all in-tree filesystems converted, out-of-tree should be
     able to follow reasonably easily.

     For out-of-tree conversions, see Documentation/filesystems/porting
     for details (and in-tree filesystems for examples of conversion).

  That has sat in -next since mid-May, seems to survive all testing
  without regressions and merges clean with v4.1"

* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits)
  turn user_{path_at,path,lpath,path_dir}() into static inlines
  namei: move saved_nd pointer into struct nameidata
  inline user_path_create()
  inline user_path_parent()
  namei: trim do_last() arguments
  namei: stash dfd and name into nameidata
  namei: fold path_cleanup() into terminate_walk()
  namei: saner calling conventions for filename_parentat()
  namei: saner calling conventions for filename_create()
  namei: shift nameidata down into filename_parentat()
  namei: make filename_lookup() reject ERR_PTR() passed as name
  namei: shift nameidata inside filename_lookup()
  namei: move putname() call into filename_lookup()
  namei: pass the struct path to store the result down into path_lookupat()
  namei: uninline set_root{,_rcu}()
  namei: be careful with mountpoint crossings in follow_dotdot_rcu()
  Documentation: remove outdated information from automount-support.txt
  get rid of assorted nameidata-related debris
  lustre: kill unused helper
  lustre: kill unused macro (LOOKUP_CONTINUE)
  ...
2015-06-22 12:51:21 -07:00
Tejun Heo fb02915f47 kernfs: make kernfs_get_inode() public
Move kernfs_get_inode() prototype from fs/kernfs/kernfs-internal.h to
include/linux/kernfs.h.  It obtains the matching inode for a
kernfs_node.

It will be used by cgroup for inode based permission checks for now
but is generally useful.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-18 16:54:28 -04:00
Wolfram Sang ba50150e80 kernfs: remove outdated and confusing comment
Grabbing the parent is not happening anymore since 2010 (e72ceb8cca
"sysfs: Remove sysfs_get/put_active_two"). Remove this confusing
comment.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24 12:28:29 -07:00
Vladimir Davydov 499611ed45 kernfs: do not account ino_ida allocations to memcg
root->ino_ida is used for kernfs inode number allocations. Since IDA has
a layered structure, different IDs can reside on the same layer, which
is currently accounted to some memory cgroup. The problem is that each
kmem cache of a memory cgroup has its own directory on sysfs (under
/sys/fs/kernel/<cache-name>/cgroup). If the inode number of such a
directory or any file in it gets allocated from a layer accounted to the
cgroup which the cache is created for, the cgroup will get pinned for
good, because one has to free all kmem allocations accounted to a cgroup
in order to release it and destroy all its kmem caches. That said we
must not account layers of ino_ida to any memory cgroup.

Since per net init operations may create new sysfs entries directly
(e.g. lo device) or indirectly (nf_conntrack creates a new kmem cache
per each namespace, which, in turn, creates new sysfs entries), an easy
way to reproduce this issue is by creating network namespace(s) from
inside a kmem-active memory cgroup.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>	[4.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-14 17:55:51 -07:00
Al Viro ecc087ff14 new helper: free_page_put_link()
similar to kfree_put_link()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-11 08:13:13 -04:00
Al Viro 5f2c4179e1 switch ->put_link() from dentry to inode
only one instance looks at that argument at all; that sole
exception wants inode rather than dentry.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-11 08:13:12 -04:00
Al Viro 6e77137b36 don't pass nameidata to ->follow_link()
its only use is getting passed to nd_jump_link(), which can obtain
it from current->nameidata

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:20:15 -04:00
Al Viro 680baacbca new ->follow_link() and ->put_link() calling conventions
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body.  Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks.  Stored pointer
is ignored in all cases except the last one.

Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().

b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is.  In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:19:45 -04:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
NeilBrown 7cff4b1836 kernfs: handle poll correctly on 'direct_read' files.
Kernfs supports two styles of read: direct_read and seqfile_read.

The latter supports 'poll' correctly thanks to the update of
'->event' in kernfs_seq_show.
The former does not as '->event' is never updated on a read.

So add an appropriate update in kernfs_file_direct_read().

This was noticed because some 'md' sysfs attributes were
recently changed to use direct reads.

Reported-by: Prakash Punnoor <prakash@punnoor.de>
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Fixes: 750f199ee8
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:51:20 +01:00
Tejun Heo dfeb0750b6 kernfs: remove KERNFS_STATIC_NAME
When a new kernfs node is created, KERNFS_STATIC_NAME is used to avoid
making a separate copy of its name.  It's currently only used for sysfs
attributes whose filenames are required to stay accessible and unchanged.
There are rare exceptions where these names are allocated and formatted
dynamically but for the vast majority of cases they're consts in the
rodata section.

Now that kernfs is converted to use kstrdup_const() and kfree_const(),
there's little point in keeping KERNFS_STATIC_NAME around.  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:36 -08:00
Andrzej Hajda 75287a677b kernfs: convert node name allocation to kstrdup_const
sysfs frequently performs duplication of strings located in read-only
memory section.  Replacing kstrdup by kstrdup_const allows to avoid such
operations.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:35 -08:00
Christoph Hellwig b83ae6d421 fs: remove mapping->backing_dev_info
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:03:05 -07:00
Christoph Hellwig a7a2c680a2 fs: deduplicate noop_backing_dev_info
hugetlbfs, kernfs and dlmfs can simply use noop_backing_dev_info instead
of creating a local duplicate.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:02:54 -07:00
Rasmus Villemoes 72392ed0eb kernfs: Fix kernfs_name_compare
Returning a difference from a comparison functions is usually wrong
(see acbbe6fbb2 "kcmp: fix standard comparison bug" for the long
story). Here there is the additional twist that if the void pointers
ns and kn->ns happen to differ by a multiple of 2^32,
kernfs_name_compare returns 0, falsely reporting a match to the
caller.

Technically 'hash - kn->hash' is ok since the hashes are restricted to
31 bits, but it's better to avoid that subtlety.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 15:51:08 -08:00
Al Viro 50062175ff vm_area_operations: kill ->migrate()
the only instance this method has ever grown was one in kernfs -
one that call ->migrate() of another vm_ops if it exists.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-17 08:26:51 -05:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00